Re: [PATCH v2 2/2] phy: freescale: add Samsung HDMI PHY

[Vinod Koul <vkoul@kernel.org>]

On 15-12-22, 21:11, Lucas Stach wrote:
> This adds the driver for the Samsung HDMI PHY found on the
> i.MX8MP SoC. Based on downstream implementation from
> Sandor Yu <Sandor.yu@nxp.com>.
> 
> Co-developed-by: Marco Felsch <m.felsch@pengutronix.de>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> v2: use DEFINE_RUNTIME_DEV_PM_OPS
> ---
>  drivers/phy/freescale/Kconfig                |   6 +
>  drivers/phy/freescale/Makefile               |   1 +
>  drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 694 +++++++++++++++++++
>  3 files changed, 701 insertions(+)
>  create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> 
> diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> index 853958fb2c06..5c2b73042dfc 100644
> --- a/drivers/phy/freescale/Kconfig
> +++ b/drivers/phy/freescale/Kconfig
> @@ -35,6 +35,12 @@ config PHY_FSL_IMX8M_PCIE
>  	  Enable this to add support for the PCIE PHY as found on
>  	  i.MX8M family of SOCs.
>  
> +config PHY_FSL_SAMSUNG_HDMI_PHY
> +	tristate "Samsung HDMI PHY support"
> +	depends on OF && HAS_IOMEM
> +	help
> +	  Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
> +
>  endif
>  
>  config PHY_FSL_LYNX_28G

this new should come after this one...

> diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
> index cedb328bc4d2..c4386bfdb853 100644
> --- a/drivers/phy/freescale/Makefile
> +++ b/drivers/phy/freescale/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_MIXEL_LVDS_PHY)	+= phy-fsl-imx8qm-lvds-phy.o
>  obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)	+= phy-fsl-imx8-mipi-dphy.o
>  obj-$(CONFIG_PHY_FSL_IMX8M_PCIE)	+= phy-fsl-imx8m-pcie.o
>  obj-$(CONFIG_PHY_FSL_LYNX_28G)		+= phy-fsl-lynx-28g.o
> +obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY)	+= phy-fsl-samsung-hdmi.o
> diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> new file mode 100644
> index 000000000000..185244dcb810
> --- /dev/null
> +++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> @@ -0,0 +1,694 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 NXP
> + * Copyright 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#define PHY_REG_00		0x00
> +#define PHY_REG_01		0x04
> +#define PHY_REG_02		0x08
> +#define PHY_REG_08		0x20
> +#define PHY_REG_09		0x24
> +#define PHY_REG_10		0x28
> +#define PHY_REG_11		0x2c

No names for regs?

> +
> +#define PHY_REG_12		0x30
> +#define  REG12_FLD_CK_DIV(x)	(((x) & 0x3) << 4)

GENMASK() pls

> +#define  REG12_TMDS_CLK		0x0
> +#define  REG12_TMDS_CLK_DIV2	0x1
> +#define  REG12_TMDS_CLK_DIV4	0x2
> +#define  REG12_TMDS_CLK_DIV8	0x3
> +
> +#define PHY_REG_13		0x34
> +#define  REG13_FLD_TG_CODE_LOW(x) (x & 0xff)
> +
> +#define PHY_REG_14		0x38
> +#define  REG14_FLD_TOL(x)	((x & 0xf) << 4)
> +#define  REG14_FLD_RP_CODE(x)	((x & 0x3) << 1)
> +#define  REG14_FLD_TG_CODE_HIGH(x) ((x >> 8) & 0x1)

FIELD_GET|PREP please

> +
> +#define PHY_REG_15		0x3c
> +#define PHY_REG_16		0x40
> +#define PHY_REG_17		0x44
> +#define PHY_REG_18		0x48
> +#define PHY_REG_19		0x4c
> +#define PHY_REG_20		0x50
> +
> +#define PHY_REG_21		0x54
> +#define  REG21_SEL_TX_CK_INV	BIT(7)
> +#define  REG21_PMS_S(x)		(x & 0xf)
> +
> +#define PHY_REG_22		0x58
> +#define PHY_REG_23		0x5c
> +#define PHY_REG_24		0x60
> +#define PHY_REG_25		0x64
> +#define PHY_REG_26		0x68
> +#define PHY_REG_27		0x6c
> +#define PHY_REG_28		0x70
> +#define PHY_REG_29		0x74
> +#define PHY_REG_30		0x78
> +#define PHY_REG_31		0x7c
> +#define PHY_REG_32		0x80
> +
> +#define PHY_REG_33		0x84
> +#define  REG33_MODE_SET_DONE	BIT(7)
> +#define  REG33_FIX_DA		BIT(1)
> +
> +#define PHY_REG_34		0x88
> +#define  REG34_PHY_READY	BIT(7)
> +#define  REG34_PLL_LOCK		BIT(6)
> +#define  REG34_PHY_CLK_READY	BIT(5)
> +
> +#define PHY_REG_35		0x8c
> +#define PHY_REG_36		0x90
> +#define PHY_REG_37		0x94
> +#define PHY_REG_38		0x98
> +#define PHY_REG_39		0x9c
> +#define PHY_REG_40		0xa0
> +#define PHY_REG_41		0xa4
> +#define PHY_REG_42		0xa8
> +#define PHY_REG_43		0xac
> +#define PHY_REG_44		0xb0
> +#define PHY_REG_45		0xb4
> +#define PHY_REG_46		0xb8
> +#define PHY_REG_47		0xbc
> +
> +#define PHY_PLL_DIV_REGS_NUM 6
> +
> +struct phy_config {
> +	u32	pixclk;
> +	u8	pll_div_regs[PHY_PLL_DIV_REGS_NUM];
> +};
> +
> +const struct phy_config phy_pll_cfg[] = {
> +	{
> +		.pixclk = 22250000,
> +		.pll_div_regs = { 0x4B, 0xF1, 0x89, 0x88, 0x80, 0x40 },

small case for hex numbers pls

> +	}, {
> +		.pixclk = 23750000,
> +		.pll_div_regs = { 0x50, 0xF1, 0x86, 0x85, 0x80, 0x40 },
> +	},{
> +		.pixclk = 24000000,
> +		.pll_div_regs = { 0x50, 0xF0, 0x00, 0x00, 0x80, 0x00 },
> +	},{
> +		.pixclk = 24024000,
> +		.pll_div_regs = { 0x50, 0xF1, 0x99, 0x02, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 25175000,
> +		.pll_div_regs = { 0x54, 0xFC, 0xCC, 0x91, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 25200000,
> +		.pll_div_regs = { 0x54, 0xF0, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 26750000,
> +		.pll_div_regs = { 0x5A, 0xF2, 0x89, 0x88, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 27000000,
> +		.pll_div_regs = { 0x5A, 0xF0, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 27027000,
> +		.pll_div_regs = { 0x5A, 0xF2, 0xFD, 0x0C, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 29500000,
> +		.pll_div_regs = { 0x62, 0xF4, 0x95, 0x08, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 30750000,
> +		.pll_div_regs = { 0x66, 0xF4, 0x82, 0x01, 0x88, 0x45 },
> +	}, {
> +		.pixclk = 30888000,
> +		.pll_div_regs = { 0x66, 0xF4, 0x99, 0x18, 0x88, 0x45 },
> +	}, {
> +		.pixclk = 33750000,
> +		.pll_div_regs = { 0x70, 0xF4, 0x82, 0x01, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 35000000,
> +		.pll_div_regs = { 0x58, 0xB8, 0x8B, 0x88, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 36000000,
> +		.pll_div_regs = { 0x5A, 0xB0, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 36036000,
> +		.pll_div_regs = { 0x5A, 0xB2, 0xFD, 0x0C, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 40000000,
> +		.pll_div_regs = { 0x64, 0xB0, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 43200000,
> +		.pll_div_regs = { 0x5A, 0x90, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 43243200,
> +		.pll_div_regs = { 0x5A, 0x92, 0xFD, 0x0C, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 44500000,
> +		.pll_div_regs = { 0x5C, 0x92, 0x98, 0x11, 0x84, 0x41 },
> +	}, {
> +		.pixclk = 47000000,
> +		.pll_div_regs = { 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 47500000,
> +		.pll_div_regs = { 0x63, 0x96, 0xA1, 0x82, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 50349650,
> +		.pll_div_regs = { 0x54, 0x7C, 0xC3, 0x8F, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 50400000,
> +		.pll_div_regs = { 0x54, 0x70, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 53250000,
> +		.pll_div_regs = { 0x58, 0x72, 0x84, 0x03, 0x82, 0x41 },
> +	}, {
> +		.pixclk = 53500000,
> +		.pll_div_regs = { 0x5A, 0x72, 0x89, 0x88, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 54000000,
> +		.pll_div_regs = { 0x5A, 0x70, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 54054000,
> +		.pll_div_regs = { 0x5A, 0x72, 0xFD, 0x0C, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 59000000,
> +		.pll_div_regs = { 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 59340659,
> +		.pll_div_regs = { 0x62, 0x74, 0xDB, 0x52, 0x88, 0x47 },
> +	}, {
> +		.pixclk = 59400000,
> +		.pll_div_regs = { 0x63, 0x70, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 61500000,
> +		.pll_div_regs = { 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
> +	}, {
> +		.pixclk = 63500000,
> +		.pll_div_regs = { 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 67500000,
> +		.pll_div_regs = { 0x54, 0x52, 0x87, 0x03, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 70000000,
> +		.pll_div_regs = { 0x58, 0x58, 0x8B, 0x88, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 72000000,
> +		.pll_div_regs = { 0x5A, 0x50, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 72072000,
> +		.pll_div_regs = { 0x5A, 0x52, 0xFD, 0x0C, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 74176000,
> +		.pll_div_regs = { 0x5D, 0x58, 0xDB, 0xA2, 0x88, 0x41 },
> +	}, {
> +		.pixclk = 74250000,
> +		.pll_div_regs = { 0x5C, 0x52, 0x90, 0x0D, 0x84, 0x41 },
> +	}, {
> +		.pixclk = 78500000,
> +		.pll_div_regs = { 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 80000000,
> +		.pll_div_regs = { 0x64, 0x50, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 82000000,
> +		.pll_div_regs = { 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
> +	}, {
> +		.pixclk = 82500000,
> +		.pll_div_regs = { 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
> +	}, {
> +		.pixclk = 89000000,
> +		.pll_div_regs = { 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 90000000,
> +		.pll_div_regs = { 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 94000000,
> +		.pll_div_regs = { 0x4E, 0x32, 0xA7, 0x10, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 95000000,
> +		.pll_div_regs = { 0x50, 0x31, 0x86, 0x85, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 98901099,
> +		.pll_div_regs = { 0x52, 0x3A, 0xDB, 0x4C, 0x88, 0x47 },
> +	}, {
> +		.pixclk = 99000000,
> +		.pll_div_regs = { 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
> +	}, {
> +		.pixclk = 100699300,
> +		.pll_div_regs = { 0x54, 0x3C, 0xC3, 0x8F, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 100800000,
> +		.pll_div_regs = { 0x54, 0x30, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 102500000,
> +		.pll_div_regs = { 0x55, 0x32, 0x8C, 0x05, 0x90, 0x4B },
> +	}, {
> +		.pixclk = 104750000,
> +		.pll_div_regs = { 0x57, 0x32, 0x98, 0x07, 0x90, 0x49 },
> +	}, {
> +		.pixclk = 106500000,
> +		.pll_div_regs = { 0x58, 0x32, 0x84, 0x03, 0x82, 0x41 },
> +	}, {
> +		.pixclk = 107000000,
> +		.pll_div_regs = { 0x5A, 0x32, 0x89, 0x88, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 108000000,
> +		.pll_div_regs = { 0x5A, 0x30, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 108108000,
> +		.pll_div_regs = { 0x5A, 0x32, 0xFD, 0x0C, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 118000000,
> +		.pll_div_regs = { 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 118800000,
> +		.pll_div_regs = { 0x63, 0x30, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 123000000,
> +		.pll_div_regs = { 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
> +	}, {
> +		.pixclk = 127000000,
> +		.pll_div_regs = { 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 135000000,
> +		.pll_div_regs = { 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 135580000,
> +		.pll_div_regs = { 0x71, 0x39, 0xE9, 0x82, 0x9C, 0x5B },
> +	}, {
> +		.pixclk = 137520000,
> +		.pll_div_regs = { 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
> +	}, {
> +		.pixclk = 138750000,
> +		.pll_div_regs = { 0x73, 0x35, 0x88, 0x05, 0x90, 0x4D },
> +	}, {
> +		.pixclk = 140000000,
> +		.pll_div_regs = { 0x75, 0x36, 0xA7, 0x90, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 144000000,
> +		.pll_div_regs = { 0x78, 0x30, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 148352000,
> +		.pll_div_regs = { 0x7B, 0x35, 0xDB, 0x39, 0x90, 0x45 },
> +	}, {
> +		.pixclk = 148500000,
> +		.pll_div_regs = { 0x7B, 0x35, 0x84, 0x03, 0x90, 0x45 },
> +	}, {
> +		.pixclk = 154000000,
> +		.pll_div_regs = { 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
> +	}, {
> +		.pixclk = 157000000,
> +		.pll_div_regs = { 0x41, 0x11, 0xA7, 0x14, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 160000000,
> +		.pll_div_regs = { 0x42, 0x12, 0xA1, 0x20, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 162000000,
> +		.pll_div_regs = { 0x43, 0x18, 0x8B, 0x08, 0x96, 0x55 },
> +	}, {
> +		.pixclk = 164000000,
> +		.pll_div_regs = { 0x45, 0x11, 0x83, 0x82, 0x90, 0x4B },
> +	}, {
> +		.pixclk = 165000000,
> +		.pll_div_regs = { 0x45, 0x11, 0x84, 0x81, 0x90, 0x4B },
> +	}, {
> +		.pixclk = 180000000,
> +		.pll_div_regs = { 0x4B, 0x10, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 185625000,
> +		.pll_div_regs = { 0x4E, 0x12, 0x9A, 0x95, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 188000000,
> +		.pll_div_regs = { 0x4E, 0x12, 0xA7, 0x10, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 198000000,
> +		.pll_div_regs = { 0x52, 0x12, 0x82, 0x01, 0x88, 0x47 },
> +	}, {
> +		.pixclk = 205000000,
> +		.pll_div_regs = { 0x55, 0x12, 0x8C, 0x05, 0x90, 0x4B },
> +	}, {
> +		.pixclk = 209500000,
> +		.pll_div_regs = { 0x57, 0x12, 0x98, 0x07, 0x90, 0x49 },
> +	}, {
> +		.pixclk = 213000000,
> +		.pll_div_regs = { 0x58, 0x12, 0x84, 0x03, 0x82, 0x41 },
> +	}, {
> +		.pixclk = 216000000,
> +		.pll_div_regs = { 0x5A, 0x10, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 216216000,
> +		.pll_div_regs = { 0x5A, 0x12, 0xFD, 0x0C, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 237600000,
> +		.pll_div_regs = { 0x63, 0x10, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 254000000,
> +		.pll_div_regs = { 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
> +	}, {
> +		.pixclk = 277500000,
> +		.pll_div_regs = { 0x73, 0x15, 0x88, 0x05, 0x90, 0x4D },
> +	}, {
> +		.pixclk = 288000000,
> +		.pll_div_regs = { 0x78, 0x10, 0x00, 0x00, 0x80, 0x00 },
> +	}, {
> +		.pixclk = 297000000,
> +		.pll_div_regs = { 0x7B, 0x15, 0x84, 0x03, 0x90, 0x45 },
> +	},

lots of magic numbers!

> +};
> +
> +struct reg_settings {
> +	u8 reg;
> +	u8 val;
> +};
> +
> +const struct reg_settings common_phy_cfg[] = {
> +	{ PHY_REG_00, 0x00 }, { PHY_REG_01, 0xD1 },
> +	{ PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
> +	{ PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
> +	/* REG12 pixclk specific */
> +	/* REG13 pixclk specific */
> +	/* REG14 pixclk specific */
> +	{ PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6C },
> +	{ PHY_REG_17, 0xF2 }, { PHY_REG_18, 0x67 },
> +	{ PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
> +	/* REG21 pixclk specific */
> +	{ PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
> +	{ PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8F },
> +	{ PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
> +	{ PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
> +	{ PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
> +	{ PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
> +	{ PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
> +	{ PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
> +	{ PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
> +	{ PHY_REG_40, 0x00 }, { PHY_REG_41, 0xE0 },
> +	{ PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0F },
> +	{ PHY_REG_44, 0x3E }, { PHY_REG_45, 0xF8 },
> +	{ PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
> +};
> +
> +struct fsl_samsung_hdmi_phy {
> +	struct device *dev;
> +	void __iomem *regs;
> +	struct clk *apbclk;
> +	struct clk *refclk;
> +
> +	/* clk provider */
> +	struct clk_hw hw;
> +	const struct phy_config *cur_cfg;
> +};
> +
> +static inline struct fsl_samsung_hdmi_phy *
> +to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
> +{
> +	return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
> +}
> +
> +static void
> +fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
> +				      const struct phy_config *cfg)
> +{
> +	u8 div;
> +
> +	switch (cfg->pixclk) {
> +	case  22250000 ...  33750000:	div = 0xf; break;
> +	case  35000000 ...  40000000:	div = 0xb; break;
> +	case  43200000 ...  47500000:	div = 0x9; break;
> +	case  50349650 ...  63500000:	div = 0x7; break;
> +	case  67500000 ...  90000000:	div = 0x5; break;
> +	case  94000000 ... 148500000:	div = 0x3; break;
> +	case 154000000 ... 297000000:	div = 0x1; break;

lets do proper linux style please

> +	}
> +
> +	writeb(REG21_SEL_TX_CK_INV | REG21_PMS_S(div), phy->regs + PHY_REG_21);
> +}
> +
> +static void
> +fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
> +					    const struct phy_config *cfg)
> +{
> +	u32 pclk = cfg->pixclk;
> +	u32 fld_tg_code;
> +	u32 pclk_khz;
> +	u8 div;
> +
> +	switch (cfg->pixclk) {
> +	case  22250000 ...  47500000:	div = 1; break;
> +	case  50349650 ...  99000000:	div = 2; break;
> +	case 100699300 ... 198000000:	div = 4; break;
> +	case 205000000 ... 297000000:	div = 8; break;
> +	}
> +
> +	writeb(REG12_FLD_CK_DIV(fls(div) - 1), phy->regs + PHY_REG_12);
> +
> +	/*
> +	 * Calculation for the frequency lock detector target code (fld_tg_code)
> +	 * is based on reference manual register description of PHY_REG13
> +	 * (13.10.3.1.14.2):
> +	 *   1st) Calculate int_pllclk which is determinded by FLD_CK_DIV
> +	 *   2nd) Increase resolution to avoid rounding issues
> +	 *   3th) Do the div (256 / Freq. of int_pllclk) * 24
> +	 *   4th) Reduce the resolution and always round up since the NXP
> +	 *        settings rounding up always too. TODO: Check if that is
> +	 *        correct.
> +	 */
> +	pclk /= div;
> +	pclk_khz = pclk / 1000;
> +	fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24;
> +	fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000);
> +
> +	/* FLD_TOL and FLD_RP_CODE taken from downstream driver */
> +	writeb(REG14_FLD_TOL(2) | REG14_FLD_RP_CODE(2) |
> +	       REG14_FLD_TG_CODE_HIGH(fld_tg_code), phy->regs + PHY_REG_14);
> +	writeb(REG13_FLD_TG_CODE_LOW(fld_tg_code), phy->regs + PHY_REG_13);
> +}
> +
> +static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
> +					  const struct phy_config *cfg)
> +{
> +	int i, ret;
> +	u8 val;
> +
> +	/* HDMI PHY init */
> +	writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
> +
> +	/* Common PHY registers registers */
> +	for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
> +		writeb(common_phy_cfg[i].val, phy->regs + common_phy_cfg[i].reg);
> +
> +	/* Set individual PLL registers PHY_REG2 ... PHY_REG7 */
> +	for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
> +		writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i * 4);
> +
> +	fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
> +	fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
> +
> +	writeb(REG33_FIX_DA | REG33_MODE_SET_DONE , phy->regs + PHY_REG_33);
> +
> +	ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
> +					 val & REG34_PLL_LOCK,
> +					 50, 20000);
> +	if (ret)
> +		dev_err(phy->dev, "PLL failed to lock\n");
> +
> +	return ret;
> +}
> +
> +static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
> +					 unsigned long parent_rate)
> +{
> +	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> +
> +	if (!phy->cur_cfg)
> +		return 74250000;
> +
> +	return phy->cur_cfg->pixclk;
> +}
> +
> +static long phy_clk_round_rate(struct clk_hw *hw,
> +			       unsigned long rate, unsigned long *parent_rate)
> +{
> +	int i;
> +
> +	for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
> +		if (phy_pll_cfg[i].pixclk <= rate)
> +			return phy_pll_cfg[i].pixclk;
> +
> +	return -EINVAL;
> +}
> +
> +static int phy_clk_set_rate(struct clk_hw *hw,
> +			    unsigned long rate, unsigned long parent_rate)
> +{
> +	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> +	int i;
> +
> +	for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
> +		if (phy_pll_cfg[i].pixclk <= rate)
> +			break;
> +
> +	if (i < 0)
> +		return -EINVAL;
> +
> +	phy->cur_cfg = &phy_pll_cfg[i];
> +
> +	return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> +}
> +
> +static const struct clk_ops phy_clk_ops = {
> +	.recalc_rate = phy_clk_recalc_rate,
> +	.round_rate = phy_clk_round_rate,
> +	.set_rate = phy_clk_set_rate,
> +};
> +
> +static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
> +{
> +	struct device *dev = phy->dev;
> +	struct device_node *np = dev->of_node;
> +	struct clk_init_data init;
> +	const char *parent_name;
> +	struct clk *phyclk;
> +	int ret;
> +
> +	parent_name = __clk_get_name(phy->refclk);
> +
> +	init.parent_names = &parent_name;
> +	init.num_parents = 1;
> +	init.flags = 0;
> +	init.name = "hdmi_pclk";
> +	init.ops = &phy_clk_ops;
> +
> +	phy->hw.init = &init;
> +
> +	phyclk = devm_clk_register(dev, &phy->hw);
> +	if (IS_ERR(phyclk))
> +		return dev_err_probe(dev, PTR_ERR(phyclk),
> +				     "failed to register clock\n");
> +
> +	ret = of_clk_add_provider(np, of_clk_src_simple_get, phyclk);
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "failed to register clock provider\n");
> +
> +	return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
> +{
> +	struct fsl_samsung_hdmi_phy *phy;
> +	int ret;
> +
> +	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> +	if (!phy)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, phy);
> +	phy->dev = &pdev->dev;
> +
> +	phy->regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(phy->regs))
> +		return PTR_ERR(phy->regs);
> +
> +	phy->apbclk = devm_clk_get(phy->dev, "apb");
> +	if (IS_ERR(phy->apbclk))
> +		return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
> +				     "failed to get apb clk\n");
> +
> +	phy->refclk = devm_clk_get(phy->dev, "ref");
> +	if (IS_ERR(phy->refclk))
> +		return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
> +				     "failed to get ref clk\n");
> +
> +	ret = clk_prepare_enable(phy->apbclk);
> +	if (ret) {
> +		dev_err(phy->dev, "failed to enable apbclk\n");
> +		return ret;
> +	}
> +
> +	pm_runtime_get_noresume(phy->dev);
> +	pm_runtime_set_active(phy->dev);
> +	pm_runtime_enable(phy->dev);
> +
> +	ret = phy_clk_register(phy);
> +	if (ret) {
> +		dev_err(&pdev->dev, "register clk failed\n");
> +		goto register_clk_failed;
> +	}
> +
> +	pm_runtime_put(phy->dev);
> +
> +	return 0;
> +
> +register_clk_failed:
> +	clk_disable_unprepare(phy->apbclk);
> +
> +	return ret;
> +}
> +
> +static int fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
> +{
> +	of_clk_del_provider(pdev->dev.of_node);
> +
> +	return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_suspend(struct device *dev)
> +{
> +	struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(phy->apbclk);
> +
> +	return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_resume(struct device *dev)
> +{
> +	struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> +	int ret = 0;
> +
> +	ret = clk_prepare_enable(phy->apbclk);
> +	if (ret) {
> +		dev_err(phy->dev, "failed to enable apbclk\n");
> +		return ret;
> +	}
> +
> +	if (phy->cur_cfg)
> +		ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
> +
> +	return ret;
> +
> +}
> +
> +DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
> +			  fsl_samsung_hdmi_phy_suspend,
> +			  fsl_samsung_hdmi_phy_resume, NULL);
> +
> +static const struct of_device_id fsl_samsung_hdmi_phy_of_match[] = {
> +	{
> +		.compatible = "fsl,imx8mp-hdmi-phy",
> +	}, {
> +		/* sentinel */
> +	}
> +};
> +MODULE_DEVICE_TABLE(of, fsl_samsung_hdmi_phy_of_match);
> +
> +static struct platform_driver fsl_samsung_hdmi_phy_driver = {
> +	.probe  = fsl_samsung_hdmi_phy_probe,
> +	.remove = fsl_samsung_hdmi_phy_remove,
> +	.driver = {
> +		.name = "fsl-samsung-hdmi-phy",
> +		.of_match_table = fsl_samsung_hdmi_phy_of_match,
> +		.pm = pm_ptr(&fsl_samsung_hdmi_phy_pm_ops),
> +	},
> +};
> +module_platform_driver(fsl_samsung_hdmi_phy_driver);
> +
> +MODULE_AUTHOR("Sandor Yu <Sandor.yu@nxp.com>");
> +MODULE_DESCRIPTION("SAMSUNG HDMI 2.0 Transmitter PHY Driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.30.2

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy