[PATCH] net: mdio: force deassert MDIO reset signal

[PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

When the reset gpio is defined within the node of the device tree
describing the PHY, the reset is initialized and managed only after
calling the fwnode_mdiobus_phy_device_register function.
However, before calling it, the MDIO communication is checked by the
get_phy_device function.
When this happen and the reset GPIO was somehow previously set down,
the get_phy_device function fails, preventing the PHY detection.
These changes force the deassert of the MDIO reset signal before
checking the MDIO channel.
The PHY may require a minimum deassert time before being responsive:
use a reasonable sleep time after forcing the deassert of the MDIO
reset signal.
Once done, free the gpio descriptor to allow managing it later.

Signed-off-by: Pierluigi Passaro <pierluigi.p@variscite.com>
Signed-off-by: FrancescoFerraro <francesco.f@variscite.com>
---
 drivers/net/mdio/fwnode_mdio.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index b782c35c4ac1..1f4b8c4c1f60 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -8,6 +8,8 @@
 
 #include <linux/acpi.h>
 #include <linux/fwnode_mdio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
 #include <linux/of.h>
 #include <linux/phy.h>
 #include <linux/pse-pd/pse.h>
@@ -118,6 +120,8 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	bool is_c45 = false;
 	u32 phy_id;
 	int rc;
+	int reset_deassert_delay = 0;
+	struct gpio_desc *reset_gpio;
 
 	psec = fwnode_find_pse_control(child);
 	if (IS_ERR(psec))
@@ -134,10 +138,31 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
 	if (rc >= 0)
 		is_c45 = true;
 
+	reset_gpio = fwnode_gpiod_get_index(child, "reset", 0, GPIOD_OUT_LOW, "PHY reset");
+	if (reset_gpio == ERR_PTR(-EPROBE_DEFER)) {
+		dev_dbg(&bus->dev, "reset signal for PHY@%u not ready\n", addr);
+		return -EPROBE_DEFER;
+	} else if (IS_ERR(reset_gpio)) {
+		if (reset_gpio == ERR_PTR(-ENOENT))
+			dev_dbg(&bus->dev, "reset signal for PHY@%u not defined\n", addr);
+		else
+			dev_dbg(&bus->dev, "failed to request reset for PHY@%u, error %ld\n", addr, PTR_ERR(reset_gpio));
+		reset_gpio = NULL;
+	} else {
+		dev_dbg(&bus->dev, "deassert reset signal for PHY@%u\n", addr);
+		fwnode_property_read_u32(child, "reset-deassert-us",
+					 &reset_deassert_delay);
+		if (reset_deassert_delay)
+			fsleep(reset_deassert_delay);
+	}
+
 	if (is_c45 || fwnode_get_phy_id(child, &phy_id))
 		phy = get_phy_device(bus, addr, is_c45);
 	else
 		phy = phy_device_create(bus, addr, phy_id, 0, NULL);
+
+	gpiochip_free_own_desc(reset_gpio);
+
 	if (IS_ERR(phy)) {
 		rc = PTR_ERR(phy);
 		goto clean_mii_ts;
-- 
2.37.2

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Andrew Lunn]

On Sun, Jan 15, 2023 at 05:10:06PM +0100, Pierluigi Passaro wrote:
> When the reset gpio is defined within the node of the device tree
> describing the PHY, the reset is initialized and managed only after
> calling the fwnode_mdiobus_phy_device_register function.
> However, before calling it, the MDIO communication is checked by the
> get_phy_device function.
> When this happen and the reset GPIO was somehow previously set down,
> the get_phy_device function fails, preventing the PHY detection.
> These changes force the deassert of the MDIO reset signal before
> checking the MDIO channel.
> The PHY may require a minimum deassert time before being responsive:
> use a reasonable sleep time after forcing the deassert of the MDIO
> reset signal.
> Once done, free the gpio descriptor to allow managing it later.

This has been discussed before. The problem is, it is not just a reset
GPIO. There could also be a clock which needs turning on, a regulator,
and/or a linux reset controller. And what order do you turn these on?

The conclusions of the discussion is you assume the device cannot be
found by enumeration, and you put the ID in the compatible. That is
enough to get the driver to load, and the driver can then turn
everything on in the correct order, with the correct delays, etc.

I think there has been some work on generic power sequencing. I've not
being following it, so i've no idea how far it has got. If that could
be used to solve this problem for all the possible controls of a PHY,
i would be open for such patches.

      Andrew

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

On Sun, Jan 15, 2023 at 6:08 PM Andrew Lunn <andrew@lunn.ch> wrote:
> On Sun, Jan 15, 2023 at 05:10:06PM +0100, Pierluigi Passaro wrote:
> > When the reset gpio is defined within the node of the device tree
> > describing the PHY, the reset is initialized and managed only after
> > calling the fwnode_mdiobus_phy_device_register function.
> > However, before calling it, the MDIO communication is checked by the
> > get_phy_device function.
> > When this happens and the reset GPIO was somehow previously set down,
> > the get_phy_device function fails, preventing the PHY detection.
> > These changes force the deassert of the MDIO reset signal before
> > checking the MDIO channel.
> > The PHY may require a minimum deassert time before being responsive:
> > use a reasonable sleep time after forcing the deassert of the MDIO
> > reset signal.
> > Once done, free the gpio descriptor to allow managing it later.
>
> This has been discussed before. The problem is, it is not just a reset
> GPIO. There could also be a clock which needs turning on, a regulator,
> and/or a linux reset controller. And what order do you turn these on?
>
> The conclusion of the discussion is you assume the device cannot be
> found by enumeration, and you put the ID in the compatible. That is
> enough to get the driver to load, and the driver can then turn
> everything on in the correct order, with the correct delays, etc.
>
Can you provide any reference to this discussion?
From our investigation, the MDIO communication is checked before managing
the "reset" gpio .
This behaviour is generally not visible, but easily reproducible with all NXP
platforms with dual fec (iMX28, iMX6UL, iMX7, iMX8QM, iMX8QXP)
where the MDIO bus is owned by the 1st interface but shared with the 2nd.
When the 1st interface is probed, this causes the probe of the MDIO bus
when the 2nd interface is not yet set up.
Here a reference configuration
https://github.com/varigit/linux-imx/blob/5.15-2.0.x-imx_var01/arch/arm64/boot/dts/freescale/imx8qm-var-spear.dtsi#L168-L219
Without this patch, the above settings can fail simply forcing the reset GPIOs
to zero in u-boot.
Please let me know if further details are needed.
>
> I think there has been some work on generic power sequencing. I've not
> being following it, so I've no idea how far it has got. If that could
> be used to solve this problem for all the possible controls of a PHY,
> i would be open for such patches.
>
>       Andrew

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Andrew Lunn]

> This behaviour is generally not visible, but easily reproducible with all NXP
> platforms with dual fec (iMX28, iMX6UL, iMX7, iMX8QM, iMX8QXP)
> where the MDIO bus is owned by the 1st interface but shared with the 2nd.
> When the 1st interface is probed, this causes the probe of the MDIO bus
> when the 2nd interface is not yet set up.

This sounds like a different issue.

We need to split the problem up into two.

1) Does probing the MDIO bus find both PHYs?

2) Do the MACs get linked to the PHYs.

If the reset is asserted at the point the MDIO bus is probed, you
probably don't find the PHY because it does not respond to register
reads. Your patch probably ensures it is out of reset so it is
enumerated.

For fec1, if the PHY is found during probe, connecting to the PHY will
work without issues. However, fec2 can potentially have ordering
issues. Has the MDIO bus finished being probed by the time fec2 looks
for it? If it is not there you want to return -EPROBE_DEFERED so that
the driver code will try again later.

There have been patches to do with ordering recently, but they have
been more to do with suspend/resume. So please make sure you are
testing net-next, if ordering is your real problem. You also appear to
be missing a lot of stable patches, so please bring you kernel up to
date on the 5.15 branch, you are way out of date.

     Andrew

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

On Sun, Jan 15, 2023 at 8:02 PM Andrew Lunn <andrew@lunn.ch> wrote:
> > This behaviour is generally not visible, but easily reproducible with all NXP
> > platforms with dual fec (iMX28, iMX6UL, iMX7, iMX8QM, iMX8QXP)
> > where the MDIO bus is owned by the 1st interface but shared with the 2nd.
> > When the 1st interface is probed, this causes the probe of the MDIO bus
> > when the 2nd interface is not yet set up.
>
> This sounds like a different issue.
>
> We need to split the problem up into two.
>
> 1) Does probing the MDIO bus find both PHYs?
>
> 2) Do the MACs get linked to the PHYs.
>
> If the reset is asserted at the point the MDIO bus is probed, you
> probably don't find the PHY because it does not respond to register
> reads. Your patch probably ensures it is out of reset so it is
> enumerated.
>
You are perfectly right: this patch fixes only the 1st problem.
For the 2nd problem, I've already sent a dedicated patch:
https://lore.kernel.org/all/20230115174910.18353-1-pierluigi.p@variscite.com/
>
> For fec1, if the PHY is found during probe, connecting to the PHY will
> work without issues. However, fec2 can potentially have ordering
> issues. Has the MDIO bus finished being probed by the time fec2 looks
> for it? If it is not there you want to return -EPROBE_DEFERED so that
> the driver code will try again later.
>
> There have been patches to do with ordering recently, but they have
> been more to do with suspend/resume. So please make sure you are
> testing net-next, if ordering is your real problem. You also appear to
> be missing a lot of stable patches, so please bring you kernel up to
> date on the 5.15 branch, you are way out of date.
>
>      Andrew

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Lars-Peter Clausen]

On 1/15/23 09:08, Andrew Lunn wrote:
> On Sun, Jan 15, 2023 at 05:10:06PM +0100, Pierluigi Passaro wrote:
>> When the reset gpio is defined within the node of the device tree
>> describing the PHY, the reset is initialized and managed only after
>> calling the fwnode_mdiobus_phy_device_register function.
>> However, before calling it, the MDIO communication is checked by the
>> get_phy_device function.
>> When this happen and the reset GPIO was somehow previously set down,
>> the get_phy_device function fails, preventing the PHY detection.
>> These changes force the deassert of the MDIO reset signal before
>> checking the MDIO channel.
>> The PHY may require a minimum deassert time before being responsive:
>> use a reasonable sleep time after forcing the deassert of the MDIO
>> reset signal.
>> Once done, free the gpio descriptor to allow managing it later.
> This has been discussed before. The problem is, it is not just a reset
> GPIO. There could also be a clock which needs turning on, a regulator,
> and/or a linux reset controller. And what order do you turn these on?
>
> The conclusions of the discussion is you assume the device cannot be
> found by enumeration, and you put the ID in the compatible. That is
> enough to get the driver to load, and the driver can then turn
> everything on in the correct order, with the correct delays, etc.

I've been running into this same problem again and again over the past 
years.

Specifying the ID as part of the compatible string works for clause 22 
PHYs, but for clause 45 PHYs it does not work. The code always wants to 
read the ID from the PHY itself. But I do not understand things well 
enough to tell whether that's a fundamental restriction of C45 or just 
our implementation and the implementation can be changed to fix it.

Do you have some thoughts on this?

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

On Sun, Jan 15, 2023 at 10:59 PM Lars-Peter Clausen <lars@metafoo.de> wrote:
> On 1/15/23 09:08, Andrew Lunn wrote:
> > On Sun, Jan 15, 2023 at 05:10:06PM +0100, Pierluigi Passaro wrote:
> >> When the reset gpio is defined within the node of the device tree
> >> describing the PHY, the reset is initialized and managed only after
> >> calling the fwnode_mdiobus_phy_device_register function.
> >> However, before calling it, the MDIO communication is checked by the
> >> get_phy_device function.
> >> When this happen and the reset GPIO was somehow previously set down,
> >> the get_phy_device function fails, preventing the PHY detection.
> >> These changes force the deassert of the MDIO reset signal before
> >> checking the MDIO channel.
> >> The PHY may require a minimum deassert time before being responsive:
> >> use a reasonable sleep time after forcing the deassert of the MDIO
> >> reset signal.
> >> Once done, free the gpio descriptor to allow managing it later.
> > This has been discussed before. The problem is, it is not just a reset
> > GPIO. There could also be a clock which needs turning on, a regulator,
> > and/or a linux reset controller. And what order do you turn these on?
> >
> > The conclusions of the discussion is you assume the device cannot be
> > found by enumeration, and you put the ID in the compatible. That is
> > enough to get the driver to load, and the driver can then turn
> > everything on in the correct order, with the correct delays, etc.
>
> I've been running into this same problem again and again over the past
> years.
>
> Specifying the ID as part of the compatible string works for clause 22
> PHYs, but for clause 45 PHYs it does not work. The code always wants to
> read the ID from the PHY itself. But I do not understand things well
> enough to tell whether that's a fundamental restriction of C45 or just
> our implementation and the implementation can be changed to fix it.
>
> Do you have some thoughts on this?
>
IMHO, since the framework allows defining the reset GPIO, it does not sound
reasonable to manage it only after checking if the PHY can communicate:
if the reset is asserted, the PHY cannot communicate at all.
This patch just ensures that, if the reset GPIO is defined, it's not asserted
while checking the communication.

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Lars-Peter Clausen]

On 1/15/23 14:33, Pierluigi Passaro wrote:
> On Sun, Jan 15, 2023 at 10:59 PM Lars-Peter Clausen <lars@metafoo.de> wrote:
>> On 1/15/23 09:08, Andrew Lunn wrote:
>>> On Sun, Jan 15, 2023 at 05:10:06PM +0100, Pierluigi Passaro wrote:
>>>> When the reset gpio is defined within the node of the device tree
>>>> describing the PHY, the reset is initialized and managed only after
>>>> calling the fwnode_mdiobus_phy_device_register function.
>>>> However, before calling it, the MDIO communication is checked by the
>>>> get_phy_device function.
>>>> When this happen and the reset GPIO was somehow previously set down,
>>>> the get_phy_device function fails, preventing the PHY detection.
>>>> These changes force the deassert of the MDIO reset signal before
>>>> checking the MDIO channel.
>>>> The PHY may require a minimum deassert time before being responsive:
>>>> use a reasonable sleep time after forcing the deassert of the MDIO
>>>> reset signal.
>>>> Once done, free the gpio descriptor to allow managing it later.
>>> This has been discussed before. The problem is, it is not just a reset
>>> GPIO. There could also be a clock which needs turning on, a regulator,
>>> and/or a linux reset controller. And what order do you turn these on?
>>>
>>> The conclusions of the discussion is you assume the device cannot be
>>> found by enumeration, and you put the ID in the compatible. That is
>>> enough to get the driver to load, and the driver can then turn
>>> everything on in the correct order, with the correct delays, etc.
>> I've been running into this same problem again and again over the past
>> years.
>>
>> Specifying the ID as part of the compatible string works for clause 22
>> PHYs, but for clause 45 PHYs it does not work. The code always wants to
>> read the ID from the PHY itself. But I do not understand things well
>> enough to tell whether that's a fundamental restriction of C45 or just
>> our implementation and the implementation can be changed to fix it.
>>
>> Do you have some thoughts on this?
>>
> IMHO, since the framework allows defining the reset GPIO, it does not sound
> reasonable to manage it only after checking if the PHY can communicate:
> if the reset is asserted, the PHY cannot communicate at all.
> This patch just ensures that, if the reset GPIO is defined, it's not asserted
> while checking the communication.

I fully agree with you and I think this is the right approach, cause it 
is required to make systems work. But I've seen two attempts in the past 
that did the very same thing and they always got rejected. I can't find 
the patches anymore, but I think one was maybe 2 years ago.

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

On Sun, Jan 15, 2023 at 11:56 PM Lars-Peter Clausen <lars@metafoo.de> wrote:
> On 1/15/23 14:33, Pierluigi Passaro wrote:
> > On Sun, Jan 15, 2023 at 10:59 PM Lars-Peter Clausen <lars@metafoo.de> wrote:
> >> On 1/15/23 09:08, Andrew Lunn wrote:
> >>> On Sun, Jan 15, 2023 at 05:10:06PM +0100, Pierluigi Passaro wrote:
> >>>> When the reset gpio is defined within the node of the device tree
> >>>> describing the PHY, the reset is initialized and managed only after
> >>>> calling the fwnode_mdiobus_phy_device_register function.
> >>>> However, before calling it, the MDIO communication is checked by the
> >>>> get_phy_device function.
> >>>> When this happen and the reset GPIO was somehow previously set down,
> >>>> the get_phy_device function fails, preventing the PHY detection.
> >>>> These changes force the deassert of the MDIO reset signal before
> >>>> checking the MDIO channel.
> >>>> The PHY may require a minimum deassert time before being responsive:
> >>>> use a reasonable sleep time after forcing the deassert of the MDIO
> >>>> reset signal.
> >>>> Once done, free the gpio descriptor to allow managing it later.
> >>> This has been discussed before. The problem is, it is not just a reset
> >>> GPIO. There could also be a clock which needs turning on, a regulator,
> >>> and/or a linux reset controller. And what order do you turn these on?
> >>>
> >>> The conclusions of the discussion is you assume the device cannot be
> >>> found by enumeration, and you put the ID in the compatible. That is
> >>> enough to get the driver to load, and the driver can then turn
> >>> everything on in the correct order, with the correct delays, etc.
> >> I've been running into this same problem again and again over the past
> >> years.
> >>
> >> Specifying the ID as part of the compatible string works for clause 22
> >> PHYs, but for clause 45 PHYs it does not work. The code always wants to
> >> read the ID from the PHY itself. But I do not understand things well
> >> enough to tell whether that's a fundamental restriction of C45 or just
> >> our implementation and the implementation can be changed to fix it.
> >>
> >> Do you have some thoughts on this?
> >>
> > IMHO, since the framework allows defining the reset GPIO, it does not sound
> > reasonable to manage it only after checking if the PHY can communicate:
> > if the reset is asserted, the PHY cannot communicate at all.
> > This patch just ensures that, if the reset GPIO is defined, it's not asserted
> > while checking the communication.
>
> I fully agree with you and I think this is the right approach, cause it
> is required to make systems work. But I've seen two attempts in the past
> that did the very same thing and they always got rejected. I can't find
> the patches anymore, but I think one was maybe 2 years ago.
>
Rejection is always a chance ;)
As long I can understand the reasons, I can at least try improving this patch.

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Andrew Lunn]

> IMHO, since the framework allows defining the reset GPIO, it does not sound
> reasonable to manage it only after checking if the PHY can communicate:
> if the reset is asserted, the PHY cannot communicate at all.
> This patch just ensures that, if the reset GPIO is defined, it's not asserted
> while checking the communication.

The problem is, you are only solving 1/4 of the problem. What about
the clock the PHY needs? And the regulator, and the linux reset
controller? And what order to do enable these, and how long do you
wait between each one?

And why are you solving this purely for Ethernet PHYs when the same
problem probably affects other sorts of devices which have reset
GPIOs, regulators and clocks? It looks like MMC/SDIO devices have a
similar problem.

https://lwn.net/Articles/867740/

As i said, i've not been following this work. Has it got anywhere? Can
ethernet PHYs use it?

	 Andrew

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

On Mon, Jan 16, 2023 at 1:11 AM Andrew Lunn <andrew@lunn.ch> wrote:
> > IMHO, since the framework allows defining the reset GPIO, it does not sound
> > reasonable to manage it only after checking if the PHY can communicate:
> > if the reset is asserted, the PHY cannot communicate at all.
> > This patch just ensures that, if the reset GPIO is defined, it's not asserted
> > while checking the communication.
>
> The problem is, you are only solving 1/4 of the problem. What about
> the clock the PHY needs? And the regulator, and the linux reset
> controller? And what order to do enable these, and how long do you
> wait between each one?
>
Interesting point of view: I was thinking about solving one of 4 problems ;)
This problem affects all the platforms using the reset GPIO without
ensuring that either u-boot or the HW put a pull-up on it.
In our test, the problem is reproducible simply setting the reset to 0 from
u-boot and then use the GPIO reset as designed in the MDIO framework.
Is this approach reasonable or a comprehensive solution is expected to
cover all additional HW actors (clocks, regulators, ...) ?>
> And why are you solving this purely for Ethernet PHYs when the same
> problem probably affects other sorts of devices which have reset
> GPIOs, regulators and clocks? It looks like MMC/SDIO devices have a
> similar problem.
>
> https://lwn.net/Articles/867740/
>
> As i said, i've not been following this work. Has it got anywhere? Can
> ethernet PHYs use it?
>
>          Andrew
I'm not that familiar with the article's implications, but it sounds like a
partial redesign of the framework is needed.
I'm not sure this is the real point.
Let's refer to I2C/SPI/USB busses, the sequence is something like
- probe and setup the bus
- once the bus is up & running, start probing the connected slaves
Apparently, in the MDIO framework there's an excessive coupling
between the MDIO bus and the PHYs.
I can't really understand why the MDIO bus must check the PHY presence.
Other busses try the communication only while probing the slaves,
never before.

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Russell King (Oracle)]

On Mon, Jan 16, 2023 at 09:44:01AM +0000, Pierluigi Passaro wrote:
> I can't really understand why the MDIO bus must check the PHY presence.
> Other busses try the communication only while probing the slaves,
> never before.

That is not true.

Any bus that relies on hardware identification to bind drivers reads
the identifying information prior to probing. For example, PCI, USB,
AMBA to name a few. AMBA didn't used to have this problem, but does
now - but at least under AMBA there's a bit more standardisation to
what needs to be done. With ethernet PHYs, what's needed is highly
platform specific.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Andrew Lunn]

On Mon, Jan 16, 2023 at 09:44:01AM +0000, Pierluigi Passaro wrote:
> On Mon, Jan 16, 2023 at 1:11 AM Andrew Lunn <andrew@lunn.ch> wrote:
> > > IMHO, since the framework allows defining the reset GPIO, it does not sound
> > > reasonable to manage it only after checking if the PHY can communicate:
> > > if the reset is asserted, the PHY cannot communicate at all.
> > > This patch just ensures that, if the reset GPIO is defined, it's not asserted
> > > while checking the communication.
> >
> > The problem is, you are only solving 1/4 of the problem. What about
> > the clock the PHY needs? And the regulator, and the linux reset
> > controller? And what order to do enable these, and how long do you
> > wait between each one?
> >
> Interesting point of view: I was thinking about solving one of 4 problems ;)

Lots of small incremental 'improvements' sometimes get you into a real
mess because you loose track of the big picture. And i do think we are
now in a mess. But i also think we have a better understanding of the
problem space. We know there can be arbitrate number of resources
which need to be enabled before you can enumerate the bus. We need a
generic solution to that problem. And Linux is good at solving a
problem once and reusing it other places. So the generic solution
should be applicable to other bus types.

We also have a well understood workaround, put the IDs in DT. So as
far as i'm concerned we don't need to add more incremental
'improvements', we can wait for somebody to put in the effort to solve
this properly with generic code.

So i don't want to merge this change. Sorry.

	Andrew

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

On Tue, Jan 17, 2023 at 3:01 PM Andrew Lunn <andrew@lunn.ch> wrote:
> On Mon, Jan 16, 2023 at 09:44:01AM +0000, Pierluigi Passaro wrote:
> > On Mon, Jan 16, 2023 at 1:11 AM Andrew Lunn <andrew@lunn.ch> wrote:
> > > > IMHO, since the framework allows defining the reset GPIO, it does not sound
> > > > reasonable to manage it only after checking if the PHY can communicate:
> > > > if the reset is asserted, the PHY cannot communicate at all.
> > > > This patch just ensures that, if the reset GPIO is defined, it's not asserted
> > > > while checking the communication.
> > >
> > > The problem is, you are only solving 1/4 of the problem. What about
> > > the clock the PHY needs? And the regulator, and the linux reset
> > > controller? And what order to do enable these, and how long do you
> > > wait between each one?
> > >
> > Interesting point of view: I was thinking about solving one of 4 problems ;)
>
> Lots of small incremental 'improvements' sometimes get you into a real
> mess because you loose track of the big picture. And i do think we are
> now in a mess. But i also think we have a better understanding of the
> problem space. We know there can be arbitrate number of resources
> which need to be enabled before you can enumerate the bus. We need a
> generic solution to that problem. And Linux is good at solving a
> problem once and reusing it other places. So the generic solution
> should be applicable to other bus types.
>
> We also have a well understood workaround, put the IDs in DT. So as
> far as i'm concerned we don't need to add more incremental
> 'improvements', we can wait for somebody to put in the effort to solve
> this properly with generic code.
>
> So i don't want to merge this change. Sorry.
>
>         Andrew
Hi Andrew,
I can understand your position and I apologize for the mess.
Thanks
Pier

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Andrew Lunn]

> Specifying the ID as part of the compatible string works for clause 22 PHYs,
> but for clause 45 PHYs it does not work. The code always wants to read the
> ID from the PHY itself. But I do not understand things well enough to tell
> whether that's a fundamental restriction of C45 or just our implementation
> and the implementation can be changed to fix it.
> 
> Do you have some thoughts on this?

Do you have more details about what goes wrong? Which PHY driver is
it? What compatibles do you put into DT for the PHY?

To some extent, the ID is only used to find the driver. A C45 device
has a lot of ID register, and all of them are used by phy_bus_match()
to see if a driver matches. So you need to be careful which ID you
pick, it needs to match the driver.

It is the driver which decides to use C22 or C45 to talk to the PHY.
However, we do have:

static int phy_probe(struct device *dev)
{
...
        else if (phydev->is_c45)
                err = genphy_c45_pma_read_abilities(phydev);
        else
                err = genphy_read_abilities(phydev);

so it could be a C45 PHY probed using an ID does not have
phydev->is_c45 set, and so it looks in the wrong place for the
capabilities. Make sure you also have the compatible
"ethernet-phy-ieee802.3-c45" which i think should cause is_c45 to be
set.

There is no fundamental restriction that i know of here, it probably
just needs somebody to debug it and find where it goes wrong.

Ah!

int fwnode_mdiobus_register_phy(struct mii_bus *bus,
                                struct fwnode_handle *child, u32 addr)
{
...
        rc = fwnode_property_match_string(child, "compatible",
                                          "ethernet-phy-ieee802.3-c45");
        if (rc >= 0)
                is_c45 = true;

        if (is_c45 || fwnode_get_phy_id(child, &phy_id))
                phy = get_phy_device(bus, addr, is_c45);
        else
                phy = phy_device_create(bus, addr, phy_id, 0, NULL);


So compatible "ethernet-phy-ieee802.3-c45" results in is_c45 being set
true. The if (is_c45 || is then true, so it does not need to call
fwnode_get_phy_id(child, &phy_id) so ignores whatever ID is in DT and
asks the PHY.

Try this, totally untested:

diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index b782c35c4ac1..13be23f8ac97 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -134,10 +134,10 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
        if (rc >= 0)
                is_c45 = true;
 
-       if (is_c45 || fwnode_get_phy_id(child, &phy_id))
+       if (fwnode_get_phy_id (child, &phy_id))
                phy = get_phy_device(bus, addr, is_c45);
        else
-               phy = phy_device_create(bus, addr, phy_id, 0, NULL);
+               phy = phy_device_create(bus, addr, phy_id, is_c45, NULL);
        if (IS_ERR(phy)) {
                rc = PTR_ERR(phy);
                goto clean_mii_ts;


     Andrew

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Lars-Peter Clausen]

On 1/15/23 15:55, Andrew Lunn wrote:
>> Specifying the ID as part of the compatible string works for clause 22 PHYs,
>> but for clause 45 PHYs it does not work. The code always wants to read the
>> ID from the PHY itself. But I do not understand things well enough to tell
>> whether that's a fundamental restriction of C45 or just our implementation
>> and the implementation can be changed to fix it.
>>
>> Do you have some thoughts on this?
> Do you have more details about what goes wrong? Which PHY driver is
> it? What compatibles do you put into DT for the PHY?
>
> To some extent, the ID is only used to find the driver. A C45 device
> has a lot of ID register, and all of them are used by phy_bus_match()
> to see if a driver matches. So you need to be careful which ID you
> pick, it needs to match the driver.
>
> It is the driver which decides to use C22 or C45 to talk to the PHY.
> However, we do have:
>
> static int phy_probe(struct device *dev)
> {
> ...
>          else if (phydev->is_c45)
>                  err = genphy_c45_pma_read_abilities(phydev);
>          else
>                  err = genphy_read_abilities(phydev);
>
> so it could be a C45 PHY probed using an ID does not have
> phydev->is_c45 set, and so it looks in the wrong place for the
> capabilities. Make sure you also have the compatible
> "ethernet-phy-ieee802.3-c45" which i think should cause is_c45 to be
> set.
>
> There is no fundamental restriction that i know of here, it probably
> just needs somebody to debug it and find where it goes wrong.
>
> Ah!
>
> int fwnode_mdiobus_register_phy(struct mii_bus *bus,
>                                  struct fwnode_handle *child, u32 addr)
> {
> ...
>          rc = fwnode_property_match_string(child, "compatible",
>                                            "ethernet-phy-ieee802.3-c45");
>          if (rc >= 0)
>                  is_c45 = true;
>
>          if (is_c45 || fwnode_get_phy_id(child, &phy_id))
>                  phy = get_phy_device(bus, addr, is_c45);
>          else
>                  phy = phy_device_create(bus, addr, phy_id, 0, NULL);
>
>
> So compatible "ethernet-phy-ieee802.3-c45" results in is_c45 being set
> true. The if (is_c45 || is then true, so it does not need to call
> fwnode_get_phy_id(child, &phy_id) so ignores whatever ID is in DT and
> asks the PHY.
>
> Try this, totally untested:
>
> diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
> index b782c35c4ac1..13be23f8ac97 100644
> --- a/drivers/net/mdio/fwnode_mdio.c
> +++ b/drivers/net/mdio/fwnode_mdio.c
> @@ -134,10 +134,10 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
>          if (rc >= 0)
>                  is_c45 = true;
>   
> -       if (is_c45 || fwnode_get_phy_id(child, &phy_id))
> +       if (fwnode_get_phy_id (child, &phy_id))
>                  phy = get_phy_device(bus, addr, is_c45);
>          else
> -               phy = phy_device_create(bus, addr, phy_id, 0, NULL);
> +               phy = phy_device_create(bus, addr, phy_id, is_c45, NULL);
>          if (IS_ERR(phy)) {
>                  rc = PTR_ERR(phy);
>                  goto clean_mii_ts;
>
I think part of the problem is that for C45 there are a few other fields 
that get populated by the ID detection, such as devices_in_package and 
mmds_present. Is this something we can do after running the PHY drivers 
probe function? Or is it too late at that point?

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

On Mon, Jan 16, 2023 at 3:41 AM Lars-Peter Clausen <lars@metafoo.de> wrote:
> On 1/15/23 15:55, Andrew Lunn wrote:
> >> Specifying the ID as part of the compatible string works for clause 22 PHYs,
> >> but for clause 45 PHYs it does not work. The code always wants to read the
> >> ID from the PHY itself. But I do not understand things well enough to tell
> >> whether that's a fundamental restriction of C45 or just our implementation
> >> and the implementation can be changed to fix it.
> >>
> >> Do you have some thoughts on this?
> > Do you have more details about what goes wrong? Which PHY driver is
> > it? What compatibles do you put into DT for the PHY?
> >
> > To some extent, the ID is only used to find the driver. A C45 device
> > has a lot of ID register, and all of them are used by phy_bus_match()
> > to see if a driver matches. So you need to be careful which ID you
> > pick, it needs to match the driver.
> >
> > It is the driver which decides to use C22 or C45 to talk to the PHY.
> > However, we do have:
> >
> > static int phy_probe(struct device *dev)
> > {
> > ...
> >          else if (phydev->is_c45)
> >                  err = genphy_c45_pma_read_abilities(phydev);
> >          else
> >                  err = genphy_read_abilities(phydev);
> >
> > so it could be a C45 PHY probed using an ID does not have
> > phydev->is_c45 set, and so it looks in the wrong place for the
> > capabilities. Make sure you also have the compatible
> > "ethernet-phy-ieee802.3-c45" which i think should cause is_c45 to be
> > set.
> >
> > There is no fundamental restriction that i know of here, it probably
> > just needs somebody to debug it and find where it goes wrong.
> >
> > Ah!
> >
> > int fwnode_mdiobus_register_phy(struct mii_bus *bus,
> >                                  struct fwnode_handle *child, u32 addr)
> > {
> > ...
> >          rc = fwnode_property_match_string(child, "compatible",
> >                                            "ethernet-phy-ieee802.3-c45");
> >          if (rc >= 0)
> >                  is_c45 = true;
> >
> >          if (is_c45 || fwnode_get_phy_id(child, &phy_id))
> >                  phy = get_phy_device(bus, addr, is_c45);
> >          else
> >                  phy = phy_device_create(bus, addr, phy_id, 0, NULL);
> >
> >
> > So compatible "ethernet-phy-ieee802.3-c45" results in is_c45 being set
> > true. The if (is_c45 || is then true, so it does not need to call
> > fwnode_get_phy_id(child, &phy_id) so ignores whatever ID is in DT and
> > asks the PHY.
> >
> > Try this, totally untested:
> >
> > diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
> > index b782c35c4ac1..13be23f8ac97 100644
> > --- a/drivers/net/mdio/fwnode_mdio.c
> > +++ b/drivers/net/mdio/fwnode_mdio.c
> > @@ -134,10 +134,10 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
> >          if (rc >= 0)
> >                  is_c45 = true;
> >  
> > -       if (is_c45 || fwnode_get_phy_id(child, &phy_id))
> > +       if (fwnode_get_phy_id (child, &phy_id))
> >                  phy = get_phy_device(bus, addr, is_c45);
> >          else
> > -               phy = phy_device_create(bus, addr, phy_id, 0, NULL);
> > +               phy = phy_device_create(bus, addr, phy_id, is_c45, NULL);
> >          if (IS_ERR(phy)) {
> >                  rc = PTR_ERR(phy);
> >                  goto clean_mii_ts;
> >
> I think part of the problem is that for C45 there are a few other fields
> that get populated by the ID detection, such as devices_in_package and
> mmds_present. Is this something we can do after running the PHY drivers
> probe function? Or is it too late at that point?
>
Unfortunately the above doesn't change the condition: this problem
is not C45 specific.
The call fwnode_get_phy_id just parses the device tree and always
passes.
This is a sample device tree
https://github.com/varigit/linux-imx/blob/5.15-2.0.x-imx_var01/arch/arm64/boot/dts/freescale/imx8qm-var-spear.dtsi#L168-L219

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Andrew Lunn]

> > So compatible "ethernet-phy-ieee802.3-c45" results in is_c45 being set
> > true. The if (is_c45 || is then true, so it does not need to call
> > fwnode_get_phy_id(child, &phy_id) so ignores whatever ID is in DT and
> > asks the PHY.
> > 
> > Try this, totally untested:
> > 
> > diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
> > index b782c35c4ac1..13be23f8ac97 100644
> > --- a/drivers/net/mdio/fwnode_mdio.c
> > +++ b/drivers/net/mdio/fwnode_mdio.c
> > @@ -134,10 +134,10 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
> >          if (rc >= 0)
> >                  is_c45 = true;
> > -       if (is_c45 || fwnode_get_phy_id(child, &phy_id))
> > +       if (fwnode_get_phy_id (child, &phy_id))
> >                  phy = get_phy_device(bus, addr, is_c45);
> >          else
> > -               phy = phy_device_create(bus, addr, phy_id, 0, NULL);
> > +               phy = phy_device_create(bus, addr, phy_id, is_c45, NULL);
> >          if (IS_ERR(phy)) {
> >                  rc = PTR_ERR(phy);
> >                  goto clean_mii_ts;
> > 
> I think part of the problem is that for C45 there are a few other fields
> that get populated by the ID detection, such as devices_in_package and
> mmds_present. Is this something we can do after running the PHY drivers
> probe function? Or is it too late at that point?

As i hinted, it needs somebody to actually debug this and figure out
why it does not work.

I think what i did above is part of the solution. You need to actually
read the ID from the DT, which if you never call fwnode_get_phy_id()
you never do.

You then need to look at phy_bus_match() and probably remove the

		return 0;
	} else {

so that C22 style ID matching is performed if matching via
c45_ids.device_ids fails.

	Andrew

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Lars-Peter Clausen]

On 1/17/23 05:40, Andrew Lunn wrote:
>>> So compatible "ethernet-phy-ieee802.3-c45" results in is_c45 being set
>>> true. The if (is_c45 || is then true, so it does not need to call
>>> fwnode_get_phy_id(child, &phy_id) so ignores whatever ID is in DT and
>>> asks the PHY.
>>>
>>> Try this, totally untested:
>>>
>>> diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
>>> index b782c35c4ac1..13be23f8ac97 100644
>>> --- a/drivers/net/mdio/fwnode_mdio.c
>>> +++ b/drivers/net/mdio/fwnode_mdio.c
>>> @@ -134,10 +134,10 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
>>>           if (rc >= 0)
>>>                   is_c45 = true;
>>> -       if (is_c45 || fwnode_get_phy_id(child, &phy_id))
>>> +       if (fwnode_get_phy_id (child, &phy_id))
>>>                   phy = get_phy_device(bus, addr, is_c45);
>>>           else
>>> -               phy = phy_device_create(bus, addr, phy_id, 0, NULL);
>>> +               phy = phy_device_create(bus, addr, phy_id, is_c45, NULL);
>>>           if (IS_ERR(phy)) {
>>>                   rc = PTR_ERR(phy);
>>>                   goto clean_mii_ts;
>>>
>> I think part of the problem is that for C45 there are a few other fields
>> that get populated by the ID detection, such as devices_in_package and
>> mmds_present. Is this something we can do after running the PHY drivers
>> probe function? Or is it too late at that point?
> As i hinted, it needs somebody to actually debug this and figure out
> why it does not work.
>
> I think what i did above is part of the solution. You need to actually
> read the ID from the DT, which if you never call fwnode_get_phy_id()
> you never do.
>
> You then need to look at phy_bus_match() and probably remove the
>
> 		return 0;
> 	} else {
>
> so that C22 style ID matching is performed if matching via
> c45_ids.device_ids fails.

Sorry, I've should have been more clear. I did try your proposed change 
a while ago. The problem why it does not work is that there are other 
fields in the phy data structure that get initialized when reading the 
IDs for C45. Such as which MMD addresses are valid.

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Andrew Lunn]

> > > I think part of the problem is that for C45 there are a few other fields
> > > that get populated by the ID detection, such as devices_in_package and
> > > mmds_present. Is this something we can do after running the PHY drivers
> > > probe function? Or is it too late at that point?
> > As i hinted, it needs somebody to actually debug this and figure out
> > why it does not work.
> > 
> > I think what i did above is part of the solution. You need to actually
> > read the ID from the DT, which if you never call fwnode_get_phy_id()
> > you never do.
> > 
> > You then need to look at phy_bus_match() and probably remove the
> > 
> > 		return 0;
> > 	} else {
> > 
> > so that C22 style ID matching is performed if matching via
> > c45_ids.device_ids fails.
> 
> Sorry, I've should have been more clear. I did try your proposed change a
> while ago. The problem why it does not work is that there are other fields
> in the phy data structure that get initialized when reading the IDs for C45.
> Such as which MMD addresses are valid.

So lets take this one step at a time.

Does this change at least get the driver loaded?

There is some code in phy-c45.c which needs
phydev->c45_ids.mmds_present. So maybe after the driver has probed,
and the device should be accessible, we need to call get_phy_c45_ids()
to fill in the missing IDs?

   Andrew

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

On Mon, Jan 16, 2023 at 12:55 AM Andrew Lunn <andrew@lunn.ch> wrote:
> > Specifying the ID as part of the compatible string works for clause 22 PHYs,
> > but for clause 45 PHYs it does not work. The code always wants to read the
> > ID from the PHY itself. But I do not understand things well enough to tell
> > whether that's a fundamental restriction of C45 or just our implementation
> > and the implementation can be changed to fix it.
> >
> > Do you have some thoughts on this?
>
> Do you have more details about what goes wrong? Which PHY driver is
> it? What compatibles do you put into DT for the PHY?
>
We use both AR8033 and ADIN1300: these are 10/100/1000 PHYs.
They are both probed after the MDIO bus, but skipped if the reset was
asserted while probing the MDIO bus.
However, for iMX6UL and iMX7 we use C22, not C45.
>
> To some extent, the ID is only used to find the driver. A C45 device
> has a lot of ID registers, and all of them are used by phy_bus_match()
> to see if a driver matches. So you need to be careful which ID you
> pick, it needs to match the driver.
>
> It is the driver which decides to use C22 or C45 to talk to the PHY.
> However, we do have:
>
> static int phy_probe(struct device *dev)
> {
> ...
>         else if (phydev->is_c45)
>                 err = genphy_c45_pma_read_abilities(phydev);
>         else
>                 err = genphy_read_abilities(phydev);
>
> so it could be a C45 PHY probed using an ID does not have
> phydev->is_c45 set, and so it looks in the wrong place for the
> capabilities. Make sure you also have the compatible
> "ethernet-phy-ieee802.3-c45" which i think should cause is_c45 to be
> set.
>
> There is no fundamental restriction that i know of here, it probably
> just needs somebody to debug it and find where it goes wrong.
>
> Ah!
>
> int fwnode_mdiobus_register_phy(struct mii_bus *bus,
>                                 struct fwnode_handle *child, u32 addr)
> {
> ...
>         rc = fwnode_property_match_string(child, "compatible",
>                                           "ethernet-phy-ieee802.3-c45");
>         if (rc >= 0)
>                 is_c45 = true;
>
>         if (is_c45 || fwnode_get_phy_id(child, &phy_id))
>                 phy = get_phy_device(bus, addr, is_c45);
>         else
>                 phy = phy_device_create(bus, addr, phy_id, 0, NULL);
>
>
> So compatible "ethernet-phy-ieee802.3-c45" results in is_c45 being set
> true. The if (is_c45 || is then true, so it does not need to call
> fwnode_get_phy_id(child, &phy_id) so ignores whatever ID is in DT and
> asks the PHY.
>
> Try this, totally untested:
>
> diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
> index b782c35c4ac1..13be23f8ac97 100644
> --- a/drivers/net/mdio/fwnode_mdio.c
> +++ b/drivers/net/mdio/fwnode_mdio.c
> @@ -134,10 +134,10 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
>         if (rc >= 0)
>                 is_c45 = true;
>
> -       if (is_c45 || fwnode_get_phy_id(child, &phy_id))
> +       if (fwnode_get_phy_id (child, &phy_id))
>                 phy = get_phy_device(bus, addr, is_c45);
>         else
> -               phy = phy_device_create(bus, addr, phy_id, 0, NULL);
> +               phy = phy_device_create(bus, addr, phy_id, is_c45, NULL);
>         if (IS_ERR(phy)) {
>                 rc = PTR_ERR(phy);
>                 goto clean_mii_ts;
>
>
>      Andrew
Unfortunately the above doesn't change the condition: this problem is not C45 specific.
The call fwnode_get_phy_id just parses the device tree and always passes.
This is a sample device tree
https://github.com/varigit/linux-imx/blob/5.15-2.0.x-imx_var01/arch/arm64/boot/dts/freescale/imx8qm-var-spear.dtsi#L168-L219

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Andrew Lunn]

On Mon, Jan 16, 2023 at 08:39:31AM +0000, Pierluigi Passaro wrote:
> On Mon, Jan 16, 2023 at 12:55 AM Andrew Lunn <andrew@lunn.ch> wrote:
> > > Specifying the ID as part of the compatible string works for clause 22 PHYs,
> > > but for clause 45 PHYs it does not work. The code always wants to read the
> > > ID from the PHY itself. But I do not understand things well enough to tell
> > > whether that's a fundamental restriction of C45 or just our implementation
> > > and the implementation can be changed to fix it.
> > >
> > > Do you have some thoughts on this?
> >
> > Do you have more details about what goes wrong? Which PHY driver is
> > it? What compatibles do you put into DT for the PHY?
> >
> We use both AR8033 and ADIN1300: these are 10/100/1000 PHYs.
> They are both probed after the MDIO bus, but skipped if the reset was
> asserted while probing the MDIO bus.
> However, for iMX6UL and iMX7 we use C22, not C45.

I never said it did. Please read the actual emails, then you would of
noticed we have go off on tangent and are trying to fix another issue.

	Andrew

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 4065 bytes --]

Hi Pierluigi,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on net-next/master]
[also build test ERROR on net/master linus/master v6.2-rc4 next-20230116]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Pierluigi-Passaro/net-mdio-force-deassert-MDIO-reset-signal/20230116-001044
patch link:    https://lore.kernel.org/r/20230115161006.16431-1-pierluigi.p%40variscite.com
patch subject: [PATCH] net: mdio: force deassert MDIO reset signal
config: nios2-defconfig
compiler: nios2-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/3f08f04af6947d4fce17b11443001c4e386ca66e
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Pierluigi-Passaro/net-mdio-force-deassert-MDIO-reset-signal/20230116-001044
        git checkout 3f08f04af6947d4fce17b11443001c4e386ca66e
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=nios2 olddefconfig
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=nios2 SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   nios2-linux-ld: drivers/net/mdio/fwnode_mdio.o: in function `fwnode_mdiobus_register_phy':
>> drivers/net/mdio/fwnode_mdio.c:164: undefined reference to `gpiochip_free_own_desc'
   drivers/net/mdio/fwnode_mdio.c:164:(.text+0x230): relocation truncated to fit: R_NIOS2_CALL26 against `gpiochip_free_own_desc'


vim +164 drivers/net/mdio/fwnode_mdio.c

   113	
   114	int fwnode_mdiobus_register_phy(struct mii_bus *bus,
   115					struct fwnode_handle *child, u32 addr)
   116	{
   117		struct mii_timestamper *mii_ts = NULL;
   118		struct pse_control *psec = NULL;
   119		struct phy_device *phy;
   120		bool is_c45 = false;
   121		u32 phy_id;
   122		int rc;
   123		int reset_deassert_delay = 0;
   124		struct gpio_desc *reset_gpio;
   125	
   126		psec = fwnode_find_pse_control(child);
   127		if (IS_ERR(psec))
   128			return PTR_ERR(psec);
   129	
   130		mii_ts = fwnode_find_mii_timestamper(child);
   131		if (IS_ERR(mii_ts)) {
   132			rc = PTR_ERR(mii_ts);
   133			goto clean_pse;
   134		}
   135	
   136		rc = fwnode_property_match_string(child, "compatible",
   137						  "ethernet-phy-ieee802.3-c45");
   138		if (rc >= 0)
   139			is_c45 = true;
   140	
   141		reset_gpio = fwnode_gpiod_get_index(child, "reset", 0, GPIOD_OUT_LOW, "PHY reset");
   142		if (reset_gpio == ERR_PTR(-EPROBE_DEFER)) {
   143			dev_dbg(&bus->dev, "reset signal for PHY@%u not ready\n", addr);
   144			return -EPROBE_DEFER;
   145		} else if (IS_ERR(reset_gpio)) {
   146			if (reset_gpio == ERR_PTR(-ENOENT))
   147				dev_dbg(&bus->dev, "reset signal for PHY@%u not defined\n", addr);
   148			else
   149				dev_dbg(&bus->dev, "failed to request reset for PHY@%u, error %ld\n", addr, PTR_ERR(reset_gpio));
   150			reset_gpio = NULL;
   151		} else {
   152			dev_dbg(&bus->dev, "deassert reset signal for PHY@%u\n", addr);
   153			fwnode_property_read_u32(child, "reset-deassert-us",
   154						 &reset_deassert_delay);
   155			if (reset_deassert_delay)
   156				fsleep(reset_deassert_delay);
   157		}
   158	
   159		if (is_c45 || fwnode_get_phy_id(child, &phy_id))
   160			phy = get_phy_device(bus, addr, is_c45);
   161		else
   162			phy = phy_device_create(bus, addr, phy_id, 0, NULL);
   163	
 > 164		gpiochip_free_own_desc(reset_gpio);

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 46608 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/nios2 6.2.0-rc3 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="nios2-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_DOMAIN=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_GENERIC_CLOCKEVENTS=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

CONFIG_BPF=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
# CONFIG_CGROUPS is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_KCMP is not set
CONFIG_EMBEDDED=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
# end of Kernel Performance Events And Counters

# CONFIG_PROFILING is not set
# end of General setup

CONFIG_NIOS2=y
CONFIG_GENERIC_CSUM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NO_IOPORT_MAP=y

#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_ARCH_FORCE_MAX_ORDER=11
# end of Kernel features

#
# Platform options
#

#
# Memory settings
#
CONFIG_NIOS2_MEM_BASE=0x10000000

#
# Device tree
#
# CONFIG_NIOS2_DTB_AT_PHYS_ADDR is not set
# CONFIG_NIOS2_DTB_SOURCE_BOOL is not set

#
# Nios II instructions
#
CONFIG_NIOS2_ARCH_REVISION=1
CONFIG_NIOS2_HW_MUL_SUPPORT=y
# CONFIG_NIOS2_HW_MULX_SUPPORT is not set
CONFIG_NIOS2_HW_DIV_SUPPORT=y
# CONFIG_NIOS2_FPU_SUPPORT is not set
# CONFIG_NIOS2_CI_SWAB_SUPPORT is not set
CONFIG_NIOS2_CI_SWAB_NO=0

#
# Cache settings
#
CONFIG_CUSTOM_CACHE_SETTINGS=y
CONFIG_NIOS2_DCACHE_SIZE=0x8000
CONFIG_NIOS2_DCACHE_LINE_SIZE=0x20
CONFIG_NIOS2_ICACHE_SIZE=0x8000
# end of Platform options

#
# Processor type and features
#
CONFIG_MMU=y
CONFIG_NR_CPUS=1
CONFIG_NIOS2_ALIGNMENT_TRAP=y

#
# Boot options
#
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_FORCE is not set
# CONFIG_NIOS2_CMDLINE_IGNORE_DTB is not set
CONFIG_NIOS2_PASS_CMDLINE=y
CONFIG_NIOS2_BOOT_LINK_OFFSET=0x00800000
# end of Processor type and features

#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set

#
# Default settings for advanced configuration options are used
#
CONFIG_NIOS2_KERNEL_MMU_REGION_BASE=0x80000000
CONFIG_NIOS2_KERNEL_REGION_BASE=0xc0000000
CONFIG_NIOS2_IO_REGION_BASE=0xe0000000
# end of Advanced setup

#
# General architecture-dependent options
#
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_ARCH_HAS_DMA_SET_UNCACHED=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_MMU_GATHER_NO_RANGE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_LTO_NONE=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPU_NO_EFFICIENT_FFS=y
# CONFIG_LOCK_EVENT_COUNTS is not set

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# end of GCOV-based kernel profiling

CONFIG_FUNCTION_ALIGNMENT=0
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ARCH_NO_SWAP=y

#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB_DEPRECATED is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_FLATMEM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CMA is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_ANON_VMA_NAME is not set
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_MPTCP=y
CONFIG_INET_MPTCP_DIAG=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_MCTP is not set
# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_NET_SELFTESTS=y
# CONFIG_FAILOVER is not set
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
# CONFIG_PCCARD is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
# CONFIG_FW_LOADER is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_DEVICES=y
CONFIG_SOC_BUS=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

# CONFIG_CONNECTOR is not set

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set

#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

#
# NAND
#
# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_RAW_NAND is not set

#
# ECC engine support
#
# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
# CONFIG_MTD_NAND_ECC_SW_BCH is not set
# CONFIG_MTD_NAND_ECC_MXIC is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_UBI is not set
# CONFIG_MTD_HYPERBUS is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SRAM is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_ECHO is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# end of SCSI device support

# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_ALTERA_TSE=y
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_SYSTEMPORT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_GEMINI_ETHERNET is not set
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9000 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_LITEX_LITEETH is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_VCAP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_SMSC911X is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_PHYLINK=y
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_FIXED_PHY=y

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MARVELL_PHY=y
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NCN26000_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_PSE_CONTROLLER is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_IPQ4019 is not set

#
# MDIO Multiplexers
#
# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
# CONFIG_MDIO_BUS_MUX_MMIOREG is not set

#
# PCS device drivers
#
CONFIG_PCS_ALTERA_TSE=y
# end of PCS device drivers

# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_WLAN is not set
# CONFIG_WAN is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_BCM is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_APBPS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_ALTERA_UART_CONSOLE is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NULL_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_DEVMEM=y
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# end of Character devices

#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TQMX86 is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_DRM is not set

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_COMMON_CLK_FIXED_MMIO is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMUFD is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# CONFIG_XILINX_INTC is not set
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_CADENCE_TORRENT is not set
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
# CONFIG_RAS is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_U_BOOT_ENV is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_SMB_SERVER is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_NLS is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# end of Crypto core or helper

#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CFB is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_ECHAINIV is not set
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
# CONFIG_CRYPTO_BLAKE2B is not set
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_XXHASH is not set
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression

#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_JITTERENTROPY is not set
# end of Random number generation

#
# Userspace interface
#
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# end of Userspace interface

CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set

#
# Certificates for signature checking
#
# end of Certificates for signature checking

#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_XZ_DEC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
# CONFIG_IRQ_POLL is not set
CONFIG_LIBFDT=y
CONFIG_SBITMAP=y
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED_NONE=y
# CONFIG_DEBUG_INFO_COMPRESSED_ZLIB is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_SAMPLES is not set

#
# nios2 Debugging
#
CONFIG_EARLY_PRINTK=y
# end of nios2 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_MAPLE_TREE is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

On Mon, Jan 16, 2023 at 9:44 AM kernel test robot <lkp@intel.com> wrote:
> Hi Pierluigi,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on net-next/master]
> [also build test ERROR on net/master linus/master v6.2-rc4 next-20230116]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>
> url:    https://github.com/intel-lab-lkp/linux/commits/Pierluigi-Passaro/net-mdio-force-deassert-MDIO-reset-signal/20230116-001044
> patch link:    https://lore.kernel.org/r/20230115161006.16431-1-pierluigi.p%40variscite.com
> patch subject: [PATCH] net: mdio: force deassert MDIO reset signal
> config: nios2-defconfig
> compiler: nios2-linux-gcc (GCC) 12.1.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/intel-lab-lkp/linux/commit/3f08f04af6947d4fce17b11443001c4e386ca66e
>         git remote add linux-review https://github.com/intel-lab-lkp/linux
>         git fetch --no-tags linux-review Pierluigi-Passaro/net-mdio-force-deassert-MDIO-reset-signal/20230116-001044
>         git checkout 3f08f04af6947d4fce17b11443001c4e386ca66e
>         # save the config file
>         mkdir build_dir && cp config build_dir/.config
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=nios2 olddefconfig
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=nios2 SHELL=/bin/bash
>
> If you fix the issue, kindly add following tag where applicable
> | Reported-by: kernel test robot <lkp@intel.com>
>
The config file used to build this kernel disables CONFIG_GPIOLIB.
Is this intentional ?
If yes, I suppose the patch should fix the code here
https://github.com/intel-lab-lkp/linux/blob/3f08f04af6947d4fce17b11443001c4e386ca66e/include/linux/gpio/driver.h#L761-L798
with something like
#ifdef CONFIG_GPIOLIB
...
struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *gc,
    unsigned int hwnum,
    const char *label,
    enum gpio_lookup_flags lflags,
    enum gpiod_flags dflags);
void gpiochip_free_own_desc(struct gpio_desc *desc);
#else
...
static inline struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *gc,
    unsigned int hwnum,
    const char *label,
    enum gpio_lookup_flags lflags,
    enum gpiod_flags dflags)
{
    /* GPIO can never have been requested */
    WARN_ON(1);
    return ERR_PTR(-ENODEV);
}
static inline void gpiochip_free_own_desc(struct gpio_desc *desc)
{
    WARN_ON(1);
}
#endif /* CONFIG_GPIOLIB */
Do you agree ?
>
> All errors (new ones prefixed by >>):
>
>    nios2-linux-ld: drivers/net/mdio/fwnode_mdio.o: in function `fwnode_mdiobus_register_phy':
> >> drivers/net/mdio/fwnode_mdio.c:164: undefined reference to `gpiochip_free_own_desc'
>    drivers/net/mdio/fwnode_mdio.c:164:(.text+0x230): relocation truncated to fit: R_NIOS2_CALL26 against `gpiochip_free_own_desc'
>
>
> vim +164 drivers/net/mdio/fwnode_mdio.c
>
>    113
>    114  int fwnode_mdiobus_register_phy(struct mii_bus *bus,
>    115                                  struct fwnode_handle *child, u32 addr)
>    116  {
>    117          struct mii_timestamper *mii_ts = NULL;
>    118          struct pse_control *psec = NULL;
>    119          struct phy_device *phy;
>    120          bool is_c45 = false;
>    121          u32 phy_id;
>    122          int rc;
>    123          int reset_deassert_delay = 0;
>    124          struct gpio_desc *reset_gpio;
>    125
>    126          psec = fwnode_find_pse_control(child);
>    127          if (IS_ERR(psec))
>    128                  return PTR_ERR(psec);
>    129
>    130          mii_ts = fwnode_find_mii_timestamper(child);
>    131          if (IS_ERR(mii_ts)) {
>    132                  rc = PTR_ERR(mii_ts);
>    133                  goto clean_pse;
>    134          }
>    135
>    136          rc = fwnode_property_match_string(child, "compatible",
>    137                                            "ethernet-phy-ieee802.3-c45");
>    138          if (rc >= 0)
>    139                  is_c45 = true;
>    140
>    141          reset_gpio = fwnode_gpiod_get_index(child, "reset", 0, GPIOD_OUT_LOW, "PHY reset");
>    142          if (reset_gpio == ERR_PTR(-EPROBE_DEFER)) {
>    143                  dev_dbg(&bus->dev, "reset signal for PHY@%u not ready\n", addr);
>    144                  return -EPROBE_DEFER;
>    145          } else if (IS_ERR(reset_gpio)) {
>    146                  if (reset_gpio == ERR_PTR(-ENOENT))
>    147                          dev_dbg(&bus->dev, "reset signal for PHY@%u not defined\n", addr);
>    148                  else
>    149                          dev_dbg(&bus->dev, "failed to request reset for PHY@%u, error %ld\n", addr, PTR_ERR(reset_gpio));
>    150                  reset_gpio = NULL;
>    151          } else {
>    152                  dev_dbg(&bus->dev, "deassert reset signal for PHY@%u\n", addr);
>    153                  fwnode_property_read_u32(child, "reset-deassert-us",
>    154                                           &reset_deassert_delay);
>    155                  if (reset_deassert_delay)
>    156                          fsleep(reset_deassert_delay);
>    157          }
>    158
>    159          if (is_c45 || fwnode_get_phy_id(child, &phy_id))
>    160                  phy = get_phy_device(bus, addr, is_c45);
>    161          else
>    162                  phy = phy_device_create(bus, addr, phy_id, 0, NULL);
>    163
>  > 164          gpiochip_free_own_desc(reset_gpio);
>
> --
> 0-DAY CI Kernel Test Service
> https://github.com/intel/lkp-tests

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Russell King (Oracle)]

On Mon, Jan 16, 2023 at 10:32:38AM +0000, Pierluigi Passaro wrote:
> The config file used to build this kernel disables CONFIG_GPIOLIB.
> Is this intentional ?

All configurations should build - and the build bot tries random
configurations. Your job is to fix the errors / warnings that it
finds as a result of your patch and submit fixes where appropriate.
Don't expect the build bot to provide any guidance or answer questions.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Pierluigi Passaro]

On Mon, Jan 16, 2023 at 9:44 AM kernel test robot <lkp@intel.com> wrote:
> Hi Pierluigi,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on net-next/master]
> [also build test ERROR on net/master linus/master v6.2-rc4 next-20230116]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>
> url:    https://github.com/intel-lab-lkp/linux/commits/Pierluigi-Passaro/net-mdio-force-deassert-MDIO-reset-signal/20230116-001044
> patch link:    https://lore.kernel.org/r/20230115161006.16431-1-pierluigi.p%40variscite.com
> patch subject: [PATCH] net: mdio: force deassert MDIO reset signal
> config: nios2-defconfig
> compiler: nios2-linux-gcc (GCC) 12.1.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/intel-lab-lkp/linux/commit/3f08f04af6947d4fce17b11443001c4e386ca66e
>         git remote add linux-review https://github.com/intel-lab-lkp/linux
>         git fetch --no-tags linux-review Pierluigi-Passaro/net-mdio-force-deassert-MDIO-reset-signal/20230116-001044
>         git checkout 3f08f04af6947d4fce17b11443001c4e386ca66e
>         # save the config file
>         mkdir build_dir && cp config build_dir/.config
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=nios2 olddefconfig
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=nios2 SHELL=/bin/bash
>
> If you fix the issue, kindly add following tag where applicable
> | Reported-by: kernel test robot <lkp@intel.com>
>
patch available here
https://lore.kernel.org/all/20230116140811.27201-1-pierluigi.p@variscite.com/
>
> All errors (new ones prefixed by >>):
>
>    nios2-linux-ld: drivers/net/mdio/fwnode_mdio.o: in function `fwnode_mdiobus_register_phy':
> >> drivers/net/mdio/fwnode_mdio.c:164: undefined reference to `gpiochip_free_own_desc'
>    drivers/net/mdio/fwnode_mdio.c:164:(.text+0x230): relocation truncated to fit: R_NIOS2_CALL26 against `gpiochip_free_own_desc'
>
>
> vim +164 drivers/net/mdio/fwnode_mdio.c
>
>    113
>    114  int fwnode_mdiobus_register_phy(struct mii_bus *bus,
>    115                                  struct fwnode_handle *child, u32 addr)
>    116  {
>    117          struct mii_timestamper *mii_ts = NULL;
>    118          struct pse_control *psec = NULL;
>    119          struct phy_device *phy;
>    120          bool is_c45 = false;
>    121          u32 phy_id;
>    122          int rc;
>    123          int reset_deassert_delay = 0;
>    124          struct gpio_desc *reset_gpio;
>    125
>    126          psec = fwnode_find_pse_control(child);
>    127          if (IS_ERR(psec))
>    128                  return PTR_ERR(psec);
>    129
>    130          mii_ts = fwnode_find_mii_timestamper(child);
>    131          if (IS_ERR(mii_ts)) {
>    132                  rc = PTR_ERR(mii_ts);
>    133                  goto clean_pse;
>    134          }
>    135
>    136          rc = fwnode_property_match_string(child, "compatible",
>    137                                            "ethernet-phy-ieee802.3-c45");
>    138          if (rc >= 0)
>    139                  is_c45 = true;
>    140
>    141          reset_gpio = fwnode_gpiod_get_index(child, "reset", 0, GPIOD_OUT_LOW, "PHY reset");
>    142          if (reset_gpio == ERR_PTR(-EPROBE_DEFER)) {
>    143                  dev_dbg(&bus->dev, "reset signal for PHY@%u not ready\n", addr);
>    144                  return -EPROBE_DEFER;
>    145          } else if (IS_ERR(reset_gpio)) {
>    146                  if (reset_gpio == ERR_PTR(-ENOENT))
>    147                          dev_dbg(&bus->dev, "reset signal for PHY@%u not defined\n", addr);
>    148                  else
>    149                          dev_dbg(&bus->dev, "failed to request reset for PHY@%u, error %ld\n", addr, PTR_ERR(reset_gpio));
>    150                  reset_gpio = NULL;
>    151          } else {
>    152                  dev_dbg(&bus->dev, "deassert reset signal for PHY@%u\n", addr);
>    153                  fwnode_property_read_u32(child, "reset-deassert-us",
>    154                                           &reset_deassert_delay);
>    155                  if (reset_deassert_delay)
>    156                          fsleep(reset_deassert_delay);
>    157          }
>    158
>    159          if (is_c45 || fwnode_get_phy_id(child, &phy_id))
>    160                  phy = get_phy_device(bus, addr, is_c45);
>    161          else
>    162                  phy = phy_device_create(bus, addr, phy_id, 0, NULL);
>    163
>  > 164          gpiochip_free_own_desc(reset_gpio);
>
> --
> 0-DAY CI Kernel Test Service
> https://github.com/intel/lkp-tests

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 4218 bytes --]

BCC: lkp@intel.com
CC: oe-kbuild-all@lists.linux.dev
In-Reply-To: <20230115161006.16431-1-pierluigi.p@variscite.com>
References: <20230115161006.16431-1-pierluigi.p@variscite.com>
TO: Pierluigi Passaro <pierluigi.passaro@gmail.com>
TO: andrew@lunn.ch
TO: hkallweit1@gmail.com
TO: linux@armlinux.org.uk
TO: davem@davemloft.net
TO: edumazet@google.com
TO: kuba@kernel.org
TO: pabeni@redhat.com
TO: netdev@vger.kernel.org
TO: linux-kernel@vger.kernel.org
CC: eran.m@variscite.com
CC: nate.d@variscite.com
CC: francesco.f@variscite.com
CC: pierluigi.p@variscite.com

Hi Pierluigi,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on net-next/master]
[also build test WARNING on net/master linus/master v6.2-rc4]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Pierluigi-Passaro/net-mdio-force-deassert-MDIO-reset-signal/20230116-001044
patch link:    https://lore.kernel.org/r/20230115161006.16431-1-pierluigi.p%40variscite.com
patch subject: [PATCH] net: mdio: force deassert MDIO reset signal
:::::: branch date: 2 days ago
:::::: commit date: 2 days ago
config: xtensa-randconfig-m041-20230116
compiler: xtensa-linux-gcc (GCC) 12.1.0

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Reported-by: Dan Carpenter <error27@gmail.com>

smatch warnings:
drivers/net/mdio/fwnode_mdio.c:144 fwnode_mdiobus_register_phy() warn: missing unwind goto?

vim +144 drivers/net/mdio/fwnode_mdio.c

bc1bee3b87ee48 Calvin Johnson    2021-06-11  113  
bc1bee3b87ee48 Calvin Johnson    2021-06-11  114  int fwnode_mdiobus_register_phy(struct mii_bus *bus,
bc1bee3b87ee48 Calvin Johnson    2021-06-11  115  				struct fwnode_handle *child, u32 addr)
bc1bee3b87ee48 Calvin Johnson    2021-06-11  116  {
bc1bee3b87ee48 Calvin Johnson    2021-06-11  117  	struct mii_timestamper *mii_ts = NULL;
5e82147de1cbd7 Oleksij Rempel    2022-10-03  118  	struct pse_control *psec = NULL;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  119  	struct phy_device *phy;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  120  	bool is_c45 = false;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  121  	u32 phy_id;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  122  	int rc;
3f08f04af6947d Pierluigi Passaro 2023-01-15  123  	int reset_deassert_delay = 0;
3f08f04af6947d Pierluigi Passaro 2023-01-15  124  	struct gpio_desc *reset_gpio;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  125  
5e82147de1cbd7 Oleksij Rempel    2022-10-03  126  	psec = fwnode_find_pse_control(child);
5e82147de1cbd7 Oleksij Rempel    2022-10-03  127  	if (IS_ERR(psec))
5e82147de1cbd7 Oleksij Rempel    2022-10-03  128  		return PTR_ERR(psec);
5e82147de1cbd7 Oleksij Rempel    2022-10-03  129  
bc1bee3b87ee48 Calvin Johnson    2021-06-11  130  	mii_ts = fwnode_find_mii_timestamper(child);
5e82147de1cbd7 Oleksij Rempel    2022-10-03  131  	if (IS_ERR(mii_ts)) {
5e82147de1cbd7 Oleksij Rempel    2022-10-03  132  		rc = PTR_ERR(mii_ts);
5e82147de1cbd7 Oleksij Rempel    2022-10-03  133  		goto clean_pse;
5e82147de1cbd7 Oleksij Rempel    2022-10-03  134  	}
bc1bee3b87ee48 Calvin Johnson    2021-06-11  135  
bc1bee3b87ee48 Calvin Johnson    2021-06-11  136  	rc = fwnode_property_match_string(child, "compatible",
bc1bee3b87ee48 Calvin Johnson    2021-06-11  137  					  "ethernet-phy-ieee802.3-c45");
bc1bee3b87ee48 Calvin Johnson    2021-06-11  138  	if (rc >= 0)
bc1bee3b87ee48 Calvin Johnson    2021-06-11  139  		is_c45 = true;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  140  
3f08f04af6947d Pierluigi Passaro 2023-01-15  141  	reset_gpio = fwnode_gpiod_get_index(child, "reset", 0, GPIOD_OUT_LOW, "PHY reset");
3f08f04af6947d Pierluigi Passaro 2023-01-15  142  	if (reset_gpio == ERR_PTR(-EPROBE_DEFER)) {
3f08f04af6947d Pierluigi Passaro 2023-01-15  143  		dev_dbg(&bus->dev, "reset signal for PHY@%u not ready\n", addr);
3f08f04af6947d Pierluigi Passaro 2023-01-15 @144  		return -EPROBE_DEFER;

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 200807 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/xtensa 6.2.0-rc3 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="xtensa-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_CONSTRUCTORS=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_GENERIC_CLOCKEVENTS=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

CONFIG_BPF=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_IKHEADERS=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_GENERIC_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EXPERT is not set
CONFIG_MULTIUSER=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_KCMP=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup

CONFIG_XTENSA=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_HZ=100
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_HAVE_XTENSA_GPIO32=y
CONFIG_KASAN_SHADOW_OFFSET=0x6e400000
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CC_HAVE_CALL0_ABI=y

#
# Processor type and features
#
# CONFIG_XTENSA_VARIANT_FSF is not set
CONFIG_XTENSA_VARIANT_DC232B=y
# CONFIG_XTENSA_VARIANT_DC233C is not set
# CONFIG_XTENSA_VARIANT_CUSTOM is not set
CONFIG_XTENSA_VARIANT_NAME="dc232b"
CONFIG_PFAULT=y
CONFIG_XTENSA_UNALIGNED_USER=y
CONFIG_FAST_SYSCALL_XTENSA=y
CONFIG_FAST_SYSCALL_SPILL_REGISTERS=y
CONFIG_KERNEL_ABI_DEFAULT=y
# CONFIG_KERNEL_ABI_CALL0 is not set
CONFIG_USER_ABI_CALL0=y
# CONFIG_USER_ABI_DEFAULT is not set
# CONFIG_USER_ABI_CALL0_ONLY is not set
CONFIG_USER_ABI_CALL0_PROBE=y
# end of Processor type and features

#
# Platform options
#
# CONFIG_XTENSA_PLATFORM_ISS is not set
CONFIG_XTENSA_PLATFORM_XT2000=y
# CONFIG_XTENSA_PLATFORM_XTFPGA is not set
CONFIG_PLATFORM_NR_IRQS=3
CONFIG_XTENSA_CPU_CLOCK=16
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_USE_OF is not set
CONFIG_BUILTIN_DTB_SOURCE=""
CONFIG_PARSE_BOOTPARAM=y

#
# Kernel memory layout
#
CONFIG_KERNEL_LOAD_ADDRESS=0xd0003000
CONFIG_XTENSA_VECTORS_IN_TEXT=y
# CONFIG_XTENSA_VECTORS_SEPARATE is not set
CONFIG_DEFAULT_MEM_START=0x00000000
CONFIG_XTENSA_KSEG_MMU_V2=y
CONFIG_HIGHMEM=y
CONFIG_ARCH_FORCE_MAX_ORDER=11
# end of Platform options

#
# Power management options
#
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PM is not set
# end of Power management options

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_ARCH_HAS_DMA_SET_UNCACHED=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_LOCK_EVENT_COUNTS=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
CONFIG_FUNCTION_ALIGNMENT=0
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_ZONED=y
# CONFIG_BLK_WBT is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
# end of IO Schedulers

CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
# CONFIG_SWAP is not set

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
# CONFIG_BOUNCE is not set
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CMA is not set
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_KMAP_LOCAL=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
# CONFIG_LRU_GEN is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_XDP_SOCKETS is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
CONFIG_X25=y
# CONFIG_LAPB is not set
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BATMAN_V is not set
CONFIG_BATMAN_ADV_NC=y
CONFIG_BATMAN_ADV_DEBUG=y
CONFIG_VSOCKETS=y
# CONFIG_VSOCKETS_DIAG is not set
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
# CONFIG_QRTR is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=y
CONFIG_ROSE=y

#
# AX.25 network device drivers
#
# CONFIG_MKISS is not set
# CONFIG_6PACK is not set
CONFIG_BPQETHER=y
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=y
# end of AX.25 network device drivers

CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
# CONFIG_CAN_GW is not set
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
CONFIG_BT=y
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
# CONFIG_BT_DEBUGFS is not set
# CONFIG_BT_FEATURE_DEBUG is not set

#
# Bluetooth device drivers
#
CONFIG_BT_MTK=y
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=y
# CONFIG_BT_HCIBCM4377 is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not set
CONFIG_BT_MTKSDIO=y
CONFIG_BT_MTKUART=y
# CONFIG_BT_QCOMSMD is not set
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers

# CONFIG_MCTP is not set
# CONFIG_WIRELESS is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_DEBUG=y
# CONFIG_CAIF is not set
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_UART=y
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set

#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_SIM is not set
# CONFIG_NFC_PORT100 is not set
# CONFIG_NFC_VIRTUAL_NCI is not set
CONFIG_NFC_FDP=y
# CONFIG_NFC_FDP_I2C is not set
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_USB=y
CONFIG_NFC_PN533_I2C=y
# CONFIG_NFC_PN532_UART is not set
CONFIG_NFC_MRVL=y
CONFIG_NFC_MRVL_USB=y
CONFIG_NFC_MRVL_UART=y
CONFIG_NFC_MRVL_I2C=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
CONFIG_NFC_NXP_NCI=y
CONFIG_NFC_NXP_NCI_I2C=y
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
# CONFIG_NFC_S3FWRN82_UART is not set
# end of Near Field Communication (NFC) devices

CONFIG_PSAMPLE=y
CONFIG_NET_IFE=y
CONFIG_LWTUNNEL=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
CONFIG_PCI_STUB=y
CONFIG_PCI_ECAM=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
CONFIG_PCI_FTPCI100=y
# CONFIG_PCIE_RCAR_EP is not set
CONFIG_PCI_HOST_COMMON=y
CONFIG_PCI_HOST_GENERIC=y
# CONFIG_PCIE_XILINX_CPM is not set
# CONFIG_PCI_XGENE is not set
# CONFIG_PCI_V3_SEMI is not set
# CONFIG_PCI_VERSATILE is not set
# CONFIG_PCIE_ALTERA is not set
# CONFIG_PCI_HOST_THUNDER_PEM is not set
# CONFIG_PCI_HOST_THUNDER_ECAM is not set
# CONFIG_PCIE_ROCKCHIP_EP is not set
# CONFIG_PCI_LOONGSON is not set
# CONFIG_PCIE_MT7621 is not set

#
# DesignWare PCI Core Support
#
# CONFIG_PCI_KEYSTONE_EP is not set
# CONFIG_PCI_LAYERSCAPE_EP is not set
# CONFIG_PCIE_QCOM_EP is not set
# CONFIG_PCIE_ARTPEC6_EP is not set
# CONFIG_PCIE_TEGRA194_EP is not set
# CONFIG_PCIE_UNIPHIER_EP is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCIE_CADENCE_PLAT_EP is not set
# CONFIG_PCI_J721E_HOST is not set
# CONFIG_PCI_J721E_EP is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
# CONFIG_PCI_EPF_TEST is not set
# CONFIG_PCI_EPF_NTB is not set
# CONFIG_PCI_EPF_VNTB is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
# CONFIG_RAPIDIO_DMA_ENGINE is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=y
# CONFIG_RAPIDIO_CHMAN is not set
# CONFIG_RAPIDIO_MPORT_CDEV is not set

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_CPS_XX=y
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_RXS_GEN3 is not set
# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SLIMBUS=y
CONFIG_REGMAP_SPMI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

# CONFIG_CONNECTOR is not set

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
CONFIG_ARM_SCMI_POWER_DOMAIN=y
# CONFIG_ARM_SCMI_POWER_CONTROL is not set
# end of ARM System Control and Management Interface Protocol

# CONFIG_ARM_SCPI_PROTOCOL is not set
CONFIG_ARM_SCPI_POWER_DOMAIN=y
# CONFIG_TURRIS_MOX_RWTM is not set
# CONFIG_BCM47XX_NVRAM is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
CONFIG_MTD=y

#
# Partition parsers
#
CONFIG_MTD_AR7_PARTS=y
# CONFIG_MTD_BCM63XX_PARTS is not set
# CONFIG_MTD_BRCM_U_BOOT is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_PARSER_IMAGETAG is not set
# CONFIG_MTD_PARSER_TPLINK_SAFELOADER is not set
# CONFIG_MTD_PARSER_TRX is not set
# CONFIG_MTD_SHARPSL_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y

#
# Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK.
#
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=y
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
CONFIG_MTD_PARTITIONED_MASTER=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
CONFIG_MTD_CFI_BE_BYTE_SWAP=y
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not set
CONFIG_MTD_PCI=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_SPEAR_SMI=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

#
# NAND
#
CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_ONENAND is not set
CONFIG_MTD_RAW_NAND=y

#
# Raw/parallel NAND flash controllers
#
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_DENALI_DT=y
CONFIG_MTD_NAND_AMS_DELTA=y
# CONFIG_MTD_NAND_SHARPSL is not set
CONFIG_MTD_NAND_CAFE=y
# CONFIG_MTD_NAND_ATMEL is not set
# CONFIG_MTD_NAND_MARVELL is not set
# CONFIG_MTD_NAND_SLC_LPC32XX is not set
# CONFIG_MTD_NAND_MLC_LPC32XX is not set
# CONFIG_MTD_NAND_BRCMNAND is not set
# CONFIG_MTD_NAND_OXNAS is not set
# CONFIG_MTD_NAND_FSL_IFC is not set
# CONFIG_MTD_NAND_VF610_NFC is not set
# CONFIG_MTD_NAND_MXC is not set
# CONFIG_MTD_NAND_SH_FLCTL is not set
# CONFIG_MTD_NAND_DAVINCI is not set
# CONFIG_MTD_NAND_TXX9NDFMC is not set
# CONFIG_MTD_NAND_FSMC is not set
# CONFIG_MTD_NAND_SUNXI is not set
# CONFIG_MTD_NAND_HISI504 is not set
# CONFIG_MTD_NAND_QCOM is not set
CONFIG_MTD_NAND_MXIC=y
# CONFIG_MTD_NAND_TEGRA is not set
# CONFIG_MTD_NAND_STM32_FMC2 is not set
# CONFIG_MTD_NAND_MESON is not set
CONFIG_MTD_NAND_GPIO=y
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_CADENCE is not set
# CONFIG_MTD_NAND_ARASAN is not set
# CONFIG_MTD_NAND_INTEL_LGM is not set
# CONFIG_MTD_NAND_RENESAS is not set

#
# Misc
#
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_RICOH=y
CONFIG_MTD_NAND_DISKONCHIP=y
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y

#
# ECC engine support
#
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
CONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_MTD_NAND_ECC_MXIC is not set
# CONFIG_MTD_NAND_ECC_MEDIATEK is not set
# end of ECC engine support
# end of NAND

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
# end of LPDDR & LPDDR2 PCM memory drivers

CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_FASTMAP=y
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
CONFIG_MTD_HYPERBUS=y
# CONFIG_HBMC_AM654 is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
# CONFIG_OF_ALL_DTBS is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESOLVE=y
CONFIG_OF_OVERLAY=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_CDROM=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_LOOP is not set

#
# DRBD disabled because PROC_FS or INET not selected
#
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=y
CONFIG_NVME_FC=y
# CONFIG_NVME_AUTH is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SMPRO_ERRMON is not set
# CONFIG_SMPRO_MISC is not set
# CONFIG_HI6421V600_IRQ is not set
# CONFIG_HP_ILO is not set
# CONFIG_QCOM_COINCELL is not set
# CONFIG_QCOM_FASTRPC is not set
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_PCH_PHUB is not set
CONFIG_SRAM=y
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=y
# CONFIG_HISI_HIKEY_USB is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
CONFIG_C2PORT=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=y
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=y
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=y
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
CONFIG_PVPANIC=y
# CONFIG_PVPANIC_MMIO is not set
# CONFIG_PVPANIC_PCI is not set
# CONFIG_GP_PCI1XXXX is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_BOOT_SYSFS=y
# CONFIG_SCSI_BNX2_ISCSI is not set
CONFIG_BE2ISCSI=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_HISI_SAS is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_MVSAS_TASKLET is not set
# CONFIG_SCSI_MVUMI is not set
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ESAS2R=y
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=y
# CONFIG_SCSI_MPI3MR is not set
CONFIG_SCSI_SMARTPQI=y
CONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
CONFIG_SCSI_MYRS=y
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_AM53C974=y
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=y
# CONFIG_SCSI_PMCRAID is not set
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
# CONFIG_SCSI_DH_ALUA is not set
# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_BRCM is not set
# CONFIG_AHCI_DA850 is not set
# CONFIG_AHCI_DM816 is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_AHCI_ST is not set
# CONFIG_AHCI_IMX is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_MTK is not set
# CONFIG_AHCI_MVEBU is not set
# CONFIG_AHCI_SUNXI is not set
# CONFIG_AHCI_TEGRA is not set
# CONFIG_AHCI_XGENE is not set
CONFIG_AHCI_QORIQ=y
# CONFIG_SATA_FSL is not set
# CONFIG_SATA_GEMINI is not set
# CONFIG_SATA_AHCI_SEATTLE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_HIGHBANK is not set
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_RCAR is not set
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
# CONFIG_PATA_HPT366 is not set
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
# CONFIG_PATA_IMX is not set
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
# CONFIG_PATA_NETCELL is not set
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
# CONFIG_PATA_PXA is not set
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_IXP4XX_CF is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SAMSUNG_CF is not set

#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
# CONFIG_MD is not set
CONFIG_TARGET_CORE=y
# CONFIG_TCM_IBLOCK is not set
# CONFIG_TCM_FILEIO is not set
CONFIG_TCM_PSCSI=y
CONFIG_LOOPBACK_TARGET=y
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_NETDEVICES=y
CONFIG_MII=y
# CONFIG_NET_CORE is not set
CONFIG_SUNGEM_PHY=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
# CONFIG_ARCNET_COM20020 is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=y
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
# CONFIG_NET_VENDOR_ACTIONS is not set
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_NET_VENDOR_AGERE is not set
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_SLICOSS=y
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_XGENE is not set
# CONFIG_NET_XGENE_V2 is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
# CONFIG_ARC_EMAC is not set
# CONFIG_EMAC_ROCKCHIP is not set
CONFIG_NET_VENDOR_ASIX=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T4 is not set
CONFIG_CHELSIO_T4VF=y
CONFIG_NET_VENDOR_CIRRUS=y
# CONFIG_CS89x0_PLATFORM is not set
# CONFIG_EP93XX_ETH is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9000 is not set
CONFIG_DNET=y
# CONFIG_NET_VENDOR_DEC is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_FARADAY=y
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
CONFIG_NET_VENDOR_FREESCALE=y
# CONFIG_FEC is not set
# CONFIG_FSL_FMAN is not set
# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_FSL_XGMAC_MDIO is not set
# CONFIG_GIANFAR is not set
# CONFIG_FSL_ENETC_IERB is not set
# CONFIG_FSL_ENETC_MDIO is not set
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_NET_VENDOR_GOOGLE is not set
CONFIG_NET_VENDOR_HISILICON=y
# CONFIG_HIX5HD2_GMAC is not set
# CONFIG_HISI_FEMAC is not set
# CONFIG_HIP04_ETH is not set
# CONFIG_HNS_DSAF is not set
# CONFIG_HNS_ENET is not set
# CONFIG_HNS3 is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
CONFIG_IGB=y
# CONFIG_IGB_HWMON is not set
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
# CONFIG_IXGBE_HWMON is not set
# CONFIG_IXGBE_DCB is not set
# CONFIG_I40E is not set
CONFIG_IGC=y
CONFIG_NET_VENDOR_WANGXUN=y
# CONFIG_NGBE is not set
# CONFIG_TXGBE is not set
CONFIG_JME=y
# CONFIG_KORINA is not set
CONFIG_NET_VENDOR_LITEX=y
# CONFIG_LITEX_LITEETH is not set
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=y
# CONFIG_MVNETA is not set
# CONFIG_MVPP2 is not set
# CONFIG_PXA168_ETH is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_NET_VENDOR_MEDIATEK is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX5_CORE=y
# CONFIG_MLX5_FPGA is not set
CONFIG_MLXSW_CORE=y
CONFIG_MLXSW_CORE_HWMON=y
CONFIG_MLXSW_CORE_THERMAL=y
# CONFIG_MLXSW_PCI is not set
# CONFIG_MLXSW_I2C is not set
CONFIG_MLXFW=y
# CONFIG_MLXBF_GIGE is not set
# CONFIG_NET_VENDOR_MICREL is not set
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_LAN743X=y
# CONFIG_VCAP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NI_XGE_MANAGEMENT_ENET=y
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
CONFIG_NS83820=y
CONFIG_XTENSA_XT2000_SONIC=y
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_AX88796 is not set
CONFIG_NE2K_PCI=y
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_LPC_ENET is not set
# CONFIG_NET_VENDOR_OKI is not set
CONFIG_ETHOC=y
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
CONFIG_QLCNIC=y
# CONFIG_QLCNIC_DCB is not set
# CONFIG_QLCNIC_HWMON is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_QED=y
CONFIG_QEDE=y
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCA7000_UART is not set
CONFIG_QCOM_EMAC=y
CONFIG_RMNET=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RENESAS is not set
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=y
CONFIG_SFC_MTD=y
# CONFIG_SFC_MCDI_MON is not set
CONFIG_SFC_MCDI_LOGGING=y
# CONFIG_SFC_FALCON is not set
# CONFIG_SFC_SIENA is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
CONFIG_NIU=y
CONFIG_NET_VENDOR_SUNPLUS=y
# CONFIG_SP7021_EMAC is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=y
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=y
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=y
# CONFIG_MESON_GXL_PHY is not set
CONFIG_ADIN_PHY=y
# CONFIG_ADIN1100_PHY is not set
CONFIG_AQUANTIA_PHY=y
CONFIG_AX88796B_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM63XX_PHY is not set
CONFIG_BCM7XXX_PHY=y
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
CONFIG_BCM_NET_PHYLIB=y
# CONFIG_CICADA_PHY is not set
CONFIG_CORTINA_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
# CONFIG_LXT_PHY is not set
CONFIG_INTEL_XWAY_PHY=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_MARVELL_10G_PHY=y
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
CONFIG_MICREL_PHY=y
CONFIG_MICROCHIP_PHY=y
CONFIG_MICROCHIP_T1_PHY=y
CONFIG_MICROSEMI_PHY=y
# CONFIG_MOTORCOMM_PHY is not set
CONFIG_NATIONAL_PHY=y
# CONFIG_NXP_C45_TJA11XX_PHY is not set
CONFIG_NXP_TJA11XX_PHY=y
# CONFIG_NCN26000_PHY is not set
# CONFIG_AT803X_PHY is not set
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_RENESAS_PHY=y
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_TERANETICS_PHY=y
# CONFIG_DP83822_PHY is not set
CONFIG_DP83TC811_PHY=y
CONFIG_DP83848_PHY=y
CONFIG_DP83867_PHY=y
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
CONFIG_VITESSE_PHY=y
CONFIG_XILINX_GMII2RGMII=y
# CONFIG_PSE_CONTROLLER is not set
CONFIG_CAN_DEV=y
CONFIG_CAN_VCAN=y
CONFIG_CAN_VXCAN=y
CONFIG_CAN_NETLINK=y
# CONFIG_CAN_CALC_BITTIMING is not set
CONFIG_CAN_RX_OFFLOAD=y
# CONFIG_CAN_AT91 is not set
# CONFIG_CAN_CAN327 is not set
CONFIG_CAN_FLEXCAN=y
CONFIG_CAN_GRCAN=y
CONFIG_CAN_JANZ_ICAN3=y
CONFIG_CAN_KVASER_PCIEFD=y
CONFIG_CAN_SLCAN=y
# CONFIG_CAN_SUN4I is not set
# CONFIG_CAN_XILINXCAN is not set
# CONFIG_CAN_C_CAN is not set
CONFIG_CAN_CC770=y
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=y
# CONFIG_CAN_CTUCANFD is not set
# CONFIG_CAN_CTUCANFD_PCI is not set
# CONFIG_CAN_CTUCANFD_PLATFORM is not set
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
CONFIG_CAN_PEAK_PCIEFD=y
# CONFIG_CAN_RCAR is not set
# CONFIG_CAN_RCAR_CANFD is not set
CONFIG_CAN_SJA1000=y
CONFIG_CAN_EMS_PCI=y
# CONFIG_CAN_F81601 is not set
# CONFIG_CAN_KVASER_PCI is not set
# CONFIG_CAN_PEAK_PCI is not set
CONFIG_CAN_PLX_PCI=y
CONFIG_CAN_SJA1000_ISA=y
# CONFIG_CAN_SJA1000_PLATFORM is not set
CONFIG_CAN_SOFTING=y

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=y
CONFIG_CAN_EMS_USB=y
# CONFIG_CAN_ESD_USB is not set
# CONFIG_CAN_ETAS_ES58X is not set
CONFIG_CAN_GS_USB=y
CONFIG_CAN_KVASER_USB=y
CONFIG_CAN_MCBA_USB=y
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces

CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_SUN4I is not set
# CONFIG_MDIO_XGENE is not set
# CONFIG_MDIO_ASPEED is not set
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_BCM_IPROC is not set
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MDIO_GPIO=y
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_MOXART is not set
# CONFIG_MDIO_OCTEON is not set
# CONFIG_MDIO_IPQ4019 is not set
# CONFIG_MDIO_IPQ8064 is not set

#
# MDIO Multiplexers
#
CONFIG_MDIO_BUS_MUX=y
# CONFIG_MDIO_BUS_MUX_MESON_G12A is not set
# CONFIG_MDIO_BUS_MUX_BCM6368 is not set
# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
# CONFIG_MDIO_BUS_MUX_GPIO is not set
CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
CONFIG_MDIO_BUS_MUX_MMIOREG=y

#
# PCS device drivers
#
# CONFIG_PCS_RZN1_MIIC is not set
# end of PCS device drivers

CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_MPPE=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOATM is not set
# CONFIG_PPPOE is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_LAN78XX=y
# CONFIG_USB_USBNET is not set
CONFIG_USB_HSO=y
# CONFIG_USB_IPHETH is not set
# CONFIG_WLAN is not set
CONFIG_WAN=y
CONFIG_HDLC=y
# CONFIG_HDLC_RAW is not set
CONFIG_HDLC_RAW_ETH=y
# CONFIG_HDLC_CISCO is not set
CONFIG_HDLC_FR=y
# CONFIG_HDLC_PPP is not set

#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=y
# CONFIG_WANXL is not set
CONFIG_PC300TOO=y
# CONFIG_FARSYNC is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

CONFIG_NET_FAILOVER=y
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=y
# CONFIG_MISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5520 is not set
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1050=y
CONFIG_KEYBOARD_QT1070=y
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_CLPS711X is not set
CONFIG_KEYBOARD_DLINK_DIR685=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_EP93XX is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_KEYBOARD_TCA6416=y
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_LPC32XX is not set
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
# CONFIG_KEYBOARD_IMX is not set
CONFIG_KEYBOARD_NEWTON=y
# CONFIG_KEYBOARD_NOMADIK is not set
# CONFIG_KEYBOARD_TEGRA is not set
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_PINEPHONE is not set
# CONFIG_KEYBOARD_PXA27x is not set
CONFIG_KEYBOARD_SAMSUNG=y
# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_ST_KEYSCAN is not set
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_KEYBOARD_OMAP4=y
# CONFIG_KEYBOARD_SPEAR is not set
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_CAP11XX is not set
CONFIG_KEYBOARD_BCM=y
# CONFIG_KEYBOARD_MT6779 is not set
# CONFIG_KEYBOARD_MTK_PMIC is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_PEGASUS=y
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_ADC=y
CONFIG_TOUCHSCREEN_AR1021_I2C=y
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_BU21029=y
CONFIG_TOUCHSCREEN_CHIPONE_ICN8318=y
# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
CONFIG_TOUCHSCREEN_CY8CTMG110=y
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP5 is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
# CONFIG_TOUCHSCREEN_DA9052 is not set
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_EGALAX_SERIAL=y
CONFIG_TOUCHSCREEN_EXC3000=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_HIDEEP=y
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
# CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX is not set
CONFIG_TOUCHSCREEN_ILI210X=y
# CONFIG_TOUCHSCREEN_ILITEK is not set
# CONFIG_TOUCHSCREEN_IPROC is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_EKTF2127=y
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MMS114 is not set
CONFIG_TOUCHSCREEN_MELFAS_MIP4=y
# CONFIG_TOUCHSCREEN_MSG2638 is not set
CONFIG_TOUCHSCREEN_MTOUCH=y
# CONFIG_TOUCHSCREEN_IMAGIS is not set
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
# CONFIG_TOUCHSCREEN_MIGOR is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WDT87XX_I2C=y
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
# CONFIG_TOUCHSCREEN_MC13783 is not set
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TS4800 is not set
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC200X_CORE=y
CONFIG_TOUCHSCREEN_TSC2004=y
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_RM_TS=y
CONFIG_TOUCHSCREEN_SILEAD=y
CONFIG_TOUCHSCREEN_SIS_I2C=y
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUN4I is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
CONFIG_TOUCHSCREEN_TPS6507X=y
# CONFIG_TOUCHSCREEN_ZET6223 is not set
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
# CONFIG_TOUCHSCREEN_ZINITIX is not set
# CONFIG_TOUCHSCREEN_HIMAX_HX83112B is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_ATMEL_CAPTOUCH=y
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_E3X0_BUTTON=y
# CONFIG_INPUT_MAX77650_ONKEY is not set
CONFIG_INPUT_MAX8997_HAPTIC=y
# CONFIG_INPUT_MC13783_PWRBUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_DECODER=y
# CONFIG_INPUT_GPIO_VIBRA is not set
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_CM109=y
CONFIG_INPUT_REGULATOR_HAPTIC=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TPS65218_PWRBUTTON=y
CONFIG_INPUT_AXP20X_PEK=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PALMAS_PWRBUTTON=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_PWM_VIBRA=y
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_DA9055_ONKEY=y
# CONFIG_INPUT_DA9063_ONKEY is not set
CONFIG_INPUT_ADXL34X=y
# CONFIG_INPUT_ADXL34X_I2C is not set
# CONFIG_INPUT_IBM_PANEL is not set
CONFIG_INPUT_IMS_PCU=y
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_DRV260X_HAPTICS=y
CONFIG_INPUT_DRV2665_HAPTICS=y
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_INPUT_HISI_POWERKEY is not set
# CONFIG_INPUT_RAVE_SP_PWRBUTTON is not set
# CONFIG_INPUT_SC27XX_VIBRA is not set
# CONFIG_INPUT_RT5120_PWRKEY is not set
# CONFIG_INPUT_STPMIC1_ONKEY is not set
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F3A is not set
CONFIG_RMI4_F54=y
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_SERIO_APBPS2=y
# CONFIG_SERIO_OLPC_APSP is not set
# CONFIG_SERIO_SUN4I_PS2 is not set
CONFIG_SERIO_GPIO_PS2=y
CONFIG_USERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LEGACY_TIOCSTI=y
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_16550A_VARIANTS=y
# CONFIG_SERIAL_8250_FINTEK is not set
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_ASPEED_VUART is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_EM is not set
# CONFIG_SERIAL_8250_IOC3 is not set
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_OMAP is not set
# CONFIG_SERIAL_8250_LPC18XX is not set
# CONFIG_SERIAL_8250_MT6577 is not set
# CONFIG_SERIAL_8250_UNIPHIER is not set
# CONFIG_SERIAL_8250_INGENIC is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
# CONFIG_SERIAL_8250_PXA is not set
CONFIG_SERIAL_8250_TEGRA=y
# CONFIG_SERIAL_8250_BCM7271 is not set
CONFIG_SERIAL_OF_PLATFORM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_ATMEL is not set
# CONFIG_SERIAL_MESON is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_TEGRA is not set
# CONFIG_SERIAL_TEGRA_TCU is not set
# CONFIG_SERIAL_IMX is not set
# CONFIG_SERIAL_IMX_EARLYCON is not set
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_HS_LPC32XX is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_ICOM is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_MXS_AUART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_MPS2_UART is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_SPRD is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_MVEBU_UART is not set
# CONFIG_SERIAL_OWL is not set
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_MILBEAUT_USIO is not set
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
# CONFIG_NOZOMI is not set
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
# CONFIG_RPMSG_TTY is not set
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
# CONFIG_IPMI_IPMB is not set
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_ASPEED_BT_IPMI_BMC is not set
# CONFIG_SSIF_IPMI_BMC is not set
CONFIG_IPMB_DEVICE_INTERFACE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_ATMEL=y
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_BCM2835=y
CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_IXP4XX=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_OMAP3_ROM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_IMX_RNGC=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_HW_RANDOM_STM32=y
CONFIG_HW_RANDOM_MESON=y
CONFIG_HW_RANDOM_MTK=y
CONFIG_HW_RANDOM_EXYNOS=y
CONFIG_HW_RANDOM_NPCM=y
CONFIG_HW_RANDOM_KEYSTONE=y
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
CONFIG_APPLICOM=y
# CONFIG_DEVMEM is not set
CONFIG_DEVPORT=y
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_I2C is not set
# CONFIG_TCG_TIS_SYNQUACER is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
CONFIG_TCG_TIS_I2C_ATMEL=y
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
CONFIG_TCG_ATMEL=y
CONFIG_TCG_VTPM_PROXY=y
CONFIG_TCG_TIS_ST33ZP24=y
CONFIG_TCG_TIS_ST33ZP24_I2C=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=y
# CONFIG_XILLYUSB is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_I2C_MUX_GPMUX=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_DEMUX_PINCTRL=y
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_HIX5HD2 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_ALTERA is not set
# CONFIG_I2C_ASPEED is not set
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_AXXIA is not set
# CONFIG_I2C_BCM2835 is not set
# CONFIG_I2C_BCM_IPROC is not set
# CONFIG_I2C_BCM_KONA is not set
CONFIG_I2C_BRCMSTB=y
CONFIG_I2C_CADENCE=y
# CONFIG_I2C_CBUS_GPIO is not set
# CONFIG_I2C_DAVINCI is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DIGICOLOR is not set
# CONFIG_I2C_EG20T is not set
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_EXYNOS5 is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_GPIO_FAULT_INJECTOR=y
# CONFIG_I2C_HIGHLANDER is not set
# CONFIG_I2C_HISI is not set
# CONFIG_I2C_IMG is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_IOP3XX is not set
# CONFIG_I2C_JZ4780 is not set
CONFIG_I2C_KEMPLD=y
# CONFIG_I2C_LPC2K is not set
# CONFIG_I2C_MESON is not set
# CONFIG_I2C_MICROCHIP_CORE is not set
# CONFIG_I2C_MT65XX is not set
# CONFIG_I2C_MT7621 is not set
# CONFIG_I2C_MV64XXX is not set
# CONFIG_I2C_MXS is not set
# CONFIG_I2C_NPCM is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_OMAP is not set
# CONFIG_I2C_OWL is not set
# CONFIG_I2C_APPLE is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PNX is not set
# CONFIG_I2C_PXA is not set
# CONFIG_I2C_QCOM_CCI is not set
# CONFIG_I2C_QUP is not set
# CONFIG_I2C_RIIC is not set
CONFIG_I2C_RK3X=y
# CONFIG_I2C_RZV2M is not set
# CONFIG_I2C_S3C2410 is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SPRD is not set
# CONFIG_I2C_ST is not set
# CONFIG_I2C_STM32F4 is not set
# CONFIG_I2C_STM32F7 is not set
# CONFIG_I2C_SUN6I_P2WI is not set
# CONFIG_I2C_SYNQUACER is not set
# CONFIG_I2C_TEGRA_BPMP is not set
# CONFIG_I2C_UNIPHIER is not set
# CONFIG_I2C_UNIPHIER_F is not set
# CONFIG_I2C_VERSATILE is not set
# CONFIG_I2C_WMT is not set
CONFIG_I2C_XILINX=y
# CONFIG_I2C_XLP9XX is not set
# CONFIG_I2C_RCAR is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_DLN2=y
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_FSI is not set
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_SLAVE_TESTUNIT is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
CONFIG_SPMI=y
# CONFIG_SPMI_HISI3670 is not set
# CONFIG_SPMI_MSM_PMIC_ARB is not set
# CONFIG_SPMI_MTK_PMIF is not set
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=y
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
CONFIG_PTP_1588_CLOCK_DTE=y
CONFIG_PTP_1588_CLOCK_QORIQ=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_OCP is not set
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_AS3722 is not set
# CONFIG_PINCTRL_AT91PIO4 is not set
CONFIG_PINCTRL_AXP209=y
# CONFIG_PINCTRL_BM1880 is not set
# CONFIG_PINCTRL_CY8C95X0 is not set
# CONFIG_PINCTRL_DA850_PUPD is not set
# CONFIG_PINCTRL_DA9062 is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
# CONFIG_PINCTRL_INGENIC is not set
# CONFIG_PINCTRL_LOONGSON2 is not set
# CONFIG_PINCTRL_LPC18XX is not set
CONFIG_PINCTRL_MAX77620=y
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
# CONFIG_PINCTRL_OCELOT is not set
# CONFIG_PINCTRL_PALMAS is not set
# CONFIG_PINCTRL_PISTACHIO is not set
# CONFIG_PINCTRL_ROCKCHIP is not set
# CONFIG_PINCTRL_SINGLE is not set
# CONFIG_PINCTRL_STMFX is not set
CONFIG_PINCTRL_SX150X=y
# CONFIG_PINCTRL_OWL is not set
# CONFIG_PINCTRL_ASPEED_G4 is not set
# CONFIG_PINCTRL_ASPEED_G5 is not set
# CONFIG_PINCTRL_ASPEED_G6 is not set
# CONFIG_PINCTRL_BCM281XX is not set
# CONFIG_PINCTRL_BCM2835 is not set
# CONFIG_PINCTRL_BCM4908 is not set
# CONFIG_PINCTRL_BCM6318 is not set
# CONFIG_PINCTRL_BCM6328 is not set
# CONFIG_PINCTRL_BCM6358 is not set
# CONFIG_PINCTRL_BCM6362 is not set
# CONFIG_PINCTRL_BCM6368 is not set
# CONFIG_PINCTRL_BCM63268 is not set
# CONFIG_PINCTRL_IPROC_GPIO is not set
# CONFIG_PINCTRL_CYGNUS_MUX is not set
# CONFIG_PINCTRL_NS is not set
# CONFIG_PINCTRL_NSP_GPIO is not set
# CONFIG_PINCTRL_NS2_MUX is not set
# CONFIG_PINCTRL_NSP_MUX is not set
# CONFIG_PINCTRL_AS370 is not set
# CONFIG_PINCTRL_BERLIN_BG4CT is not set
CONFIG_PINCTRL_MADERA=y
CONFIG_PINCTRL_CS47L15=y
CONFIG_PINCTRL_CS47L85=y
CONFIG_PINCTRL_CS47L90=y

#
# Intel pinctrl drivers
#
# end of Intel pinctrl drivers

#
# MediaTek pinctrl drivers
#
# CONFIG_EINT_MTK is not set
# CONFIG_PINCTRL_MT2701 is not set
# CONFIG_PINCTRL_MT7623 is not set
# CONFIG_PINCTRL_MT7629 is not set
# CONFIG_PINCTRL_MT8135 is not set
# CONFIG_PINCTRL_MT8127 is not set
# CONFIG_PINCTRL_MT2712 is not set
# CONFIG_PINCTRL_MT6765 is not set
# CONFIG_PINCTRL_MT6779 is not set
# CONFIG_PINCTRL_MT6795 is not set
# CONFIG_PINCTRL_MT6797 is not set
# CONFIG_PINCTRL_MT7622 is not set
# CONFIG_PINCTRL_MT7986 is not set
# CONFIG_PINCTRL_MT8167 is not set
# CONFIG_PINCTRL_MT8173 is not set
# CONFIG_PINCTRL_MT8183 is not set
# CONFIG_PINCTRL_MT8186 is not set
# CONFIG_PINCTRL_MT8188 is not set
# CONFIG_PINCTRL_MT8192 is not set
# CONFIG_PINCTRL_MT8195 is not set
# CONFIG_PINCTRL_MT8365 is not set
# CONFIG_PINCTRL_MT8516 is not set
# CONFIG_PINCTRL_MT6397 is not set
# end of MediaTek pinctrl drivers

CONFIG_PINCTRL_MESON=y
# CONFIG_PINCTRL_WPCM450 is not set
# CONFIG_PINCTRL_NPCM7XX is not set
# CONFIG_PINCTRL_PXA25X is not set
# CONFIG_PINCTRL_PXA27X is not set
# CONFIG_PINCTRL_MSM is not set
# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
# CONFIG_PINCTRL_LPASS_LPI is not set

#
# Renesas pinctrl drivers
#
# CONFIG_PINCTRL_RENESAS is not set
# CONFIG_PINCTRL_PFC_EMEV2 is not set
# CONFIG_PINCTRL_PFC_R8A77995 is not set
# CONFIG_PINCTRL_PFC_R8A7794 is not set
# CONFIG_PINCTRL_PFC_R8A77990 is not set
# CONFIG_PINCTRL_PFC_R8A7779 is not set
# CONFIG_PINCTRL_PFC_R8A7790 is not set
# CONFIG_PINCTRL_PFC_R8A77950 is not set
# CONFIG_PINCTRL_PFC_R8A77951 is not set
# CONFIG_PINCTRL_PFC_R8A7778 is not set
# CONFIG_PINCTRL_PFC_R8A7793 is not set
# CONFIG_PINCTRL_PFC_R8A7791 is not set
# CONFIG_PINCTRL_PFC_R8A77965 is not set
# CONFIG_PINCTRL_PFC_R8A77960 is not set
# CONFIG_PINCTRL_PFC_R8A77961 is not set
# CONFIG_PINCTRL_PFC_R8A779F0 is not set
# CONFIG_PINCTRL_PFC_R8A7792 is not set
# CONFIG_PINCTRL_PFC_R8A77980 is not set
# CONFIG_PINCTRL_PFC_R8A77970 is not set
# CONFIG_PINCTRL_PFC_R8A779A0 is not set
# CONFIG_PINCTRL_PFC_R8A779G0 is not set
# CONFIG_PINCTRL_PFC_R8A7740 is not set
# CONFIG_PINCTRL_PFC_R8A73A4 is not set
# CONFIG_PINCTRL_RZA1 is not set
# CONFIG_PINCTRL_RZA2 is not set
# CONFIG_PINCTRL_RZG2L is not set
# CONFIG_PINCTRL_PFC_R8A77470 is not set
# CONFIG_PINCTRL_PFC_R8A7745 is not set
# CONFIG_PINCTRL_PFC_R8A7742 is not set
# CONFIG_PINCTRL_PFC_R8A7743 is not set
# CONFIG_PINCTRL_PFC_R8A7744 is not set
# CONFIG_PINCTRL_PFC_R8A774C0 is not set
# CONFIG_PINCTRL_PFC_R8A774E1 is not set
# CONFIG_PINCTRL_PFC_R8A774A1 is not set
# CONFIG_PINCTRL_PFC_R8A774B1 is not set
# CONFIG_PINCTRL_RZN1 is not set
# CONFIG_PINCTRL_RZV2M is not set
# CONFIG_PINCTRL_PFC_SH7203 is not set
# CONFIG_PINCTRL_PFC_SH7264 is not set
# CONFIG_PINCTRL_PFC_SH7269 is not set
# CONFIG_PINCTRL_PFC_SH7720 is not set
# CONFIG_PINCTRL_PFC_SH7722 is not set
# CONFIG_PINCTRL_PFC_SH7734 is not set
# CONFIG_PINCTRL_PFC_SH7757 is not set
# CONFIG_PINCTRL_PFC_SH7785 is not set
# CONFIG_PINCTRL_PFC_SH7786 is not set
# CONFIG_PINCTRL_PFC_SH73A0 is not set
# CONFIG_PINCTRL_PFC_SH7723 is not set
# CONFIG_PINCTRL_PFC_SH7724 is not set
# CONFIG_PINCTRL_PFC_SHX3 is not set
# end of Renesas pinctrl drivers

# CONFIG_PINCTRL_EXYNOS is not set
# CONFIG_PINCTRL_S3C24XX is not set
# CONFIG_PINCTRL_S3C64XX is not set
# CONFIG_PINCTRL_SPRD_SC9860 is not set
# CONFIG_PINCTRL_STARFIVE_JH7100 is not set
# CONFIG_PINCTRL_STM32F429 is not set
# CONFIG_PINCTRL_STM32F469 is not set
# CONFIG_PINCTRL_STM32F746 is not set
# CONFIG_PINCTRL_STM32F769 is not set
# CONFIG_PINCTRL_STM32H743 is not set
# CONFIG_PINCTRL_STM32MP135 is not set
# CONFIG_PINCTRL_STM32MP157 is not set
# CONFIG_PINCTRL_TI_IODELAY is not set
CONFIG_PINCTRL_UNIPHIER=y
# CONFIG_PINCTRL_UNIPHIER_LD4 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set
# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set
# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set
# CONFIG_PINCTRL_UNIPHIER_LD6B is not set
# CONFIG_PINCTRL_UNIPHIER_LD11 is not set
# CONFIG_PINCTRL_UNIPHIER_LD20 is not set
# CONFIG_PINCTRL_UNIPHIER_PXS3 is not set
# CONFIG_PINCTRL_UNIPHIER_NX1 is not set
# CONFIG_PINCTRL_TMPV7700 is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_OF_GPIO=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_IDIO_16=y

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_74XX_MMIO=y
CONFIG_GPIO_ALTERA=y
# CONFIG_GPIO_ASPEED is not set
# CONFIG_GPIO_ASPEED_SGPIO is not set
# CONFIG_GPIO_ATH79 is not set
# CONFIG_GPIO_RASPBERRYPI_EXP is not set
# CONFIG_GPIO_BCM_KONA is not set
# CONFIG_GPIO_BCM_XGS_IPROC is not set
# CONFIG_GPIO_BRCMSTB is not set
CONFIG_GPIO_CADENCE=y
# CONFIG_GPIO_CLPS711X is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EIC_SPRD is not set
# CONFIG_GPIO_EM is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_FTGPIO010 is not set
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_GRGPIO is not set
# CONFIG_GPIO_HISI is not set
CONFIG_GPIO_HLWD=y
# CONFIG_GPIO_IOP is not set
# CONFIG_GPIO_LOGICVC is not set
# CONFIG_GPIO_LPC18XX is not set
# CONFIG_GPIO_LPC32XX is not set
CONFIG_GPIO_MB86S7X=y
# CONFIG_GPIO_MPC8XXX is not set
# CONFIG_GPIO_MT7621 is not set
# CONFIG_GPIO_MXC is not set
# CONFIG_GPIO_MXS is not set
# CONFIG_GPIO_PMIC_EIC_SPRD is not set
# CONFIG_GPIO_PXA is not set
# CONFIG_GPIO_RCAR is not set
# CONFIG_GPIO_RDA is not set
# CONFIG_GPIO_ROCKCHIP is not set
# CONFIG_GPIO_SAMA5D2_PIOBU is not set
# CONFIG_GPIO_SIFIVE is not set
# CONFIG_GPIO_SIOX is not set
# CONFIG_GPIO_SNPS_CREG is not set
# CONFIG_GPIO_SPRD is not set
# CONFIG_GPIO_STP_XWAY is not set
CONFIG_GPIO_SYSCON=y
# CONFIG_GPIO_TEGRA is not set
# CONFIG_GPIO_TEGRA186 is not set
# CONFIG_GPIO_TS4800 is not set
# CONFIG_GPIO_UNIPHIER is not set
# CONFIG_GPIO_VISCONTI is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XGENE_SB is not set
CONFIG_GPIO_XILINX=y
# CONFIG_GPIO_XLP is not set
# CONFIG_GPIO_XTENSA is not set
CONFIG_GPIO_AMD_FCH=y
# CONFIG_GPIO_IDT3243X is not set
# end of Memory mapped GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADNP is not set
CONFIG_GPIO_GW_PLD=y
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCA9570 is not set
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_TPIC2810 is not set
# CONFIG_GPIO_TS4900 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_BD9571MWV=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
# CONFIG_GPIO_DLN2 is not set
CONFIG_GPIO_JANZ_TTL=y
# CONFIG_GPIO_KEMPLD is not set
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_LP87565 is not set
CONFIG_GPIO_MADERA=y
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_MAX77650=y
CONFIG_GPIO_PALMAS=y
# CONFIG_GPIO_SL28CPLD is not set
CONFIG_GPIO_TPS65086=y
CONFIG_GPIO_TQMX86=y
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCH is not set
CONFIG_GPIO_PCI_IDIO_16=y
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# USB GPIO expanders
#
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_LATCH is not set
CONFIG_GPIO_MOCKUP=y
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

CONFIG_W1=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_MXC is not set
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
# CONFIG_W1_MASTER_SGI is not set
# end of 1-wire Bus Masters

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2805=y
# CONFIG_W1_SLAVE_DS2430 is not set
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2438=y
CONFIG_W1_SLAVE_DS250X=y
CONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_DS2781 is not set
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_DS28E17=y
# end of 1-wire Slaves

# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_POWER_SUPPLY_HWMON is not set
# CONFIG_PDA_POWER is not set
CONFIG_GENERIC_ADC_BATTERY=y
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
CONFIG_CHARGER_ADP5061=y
# CONFIG_BATTERY_ACT8945A is not set
# CONFIG_BATTERY_CW2015 is not set
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_LEGO_EV3=y
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_WM97XX=y
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
CONFIG_MANAGER_SBS=y
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_DA9052=y
CONFIG_CHARGER_DA9150=y
# CONFIG_BATTERY_DA9150 is not set
CONFIG_CHARGER_AXP20X=y
CONFIG_BATTERY_AXP20X=y
CONFIG_AXP20X_POWER=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_ISP1704=y
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77650=y
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_QCOM_SMBB is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=y
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65217 is not set
CONFIG_BATTERY_GAUGE_LTC2941=y
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_SC2731 is not set
# CONFIG_FUEL_GAUGE_SC27XX is not set
# CONFIG_CHARGER_UCS1002 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
CONFIG_SENSORS_AS370=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ASPEED=y
CONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_BT1_PVT is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_DA9052_ADC is not set
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
# CONFIG_SENSORS_SPARX5 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_FTSTEUTATES=y
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LAN966X is not set
CONFIG_SENSORS_LINEAGE=y
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
CONFIG_SENSORS_LTC2990=y
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=y
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
CONFIG_SENSORS_MAX6621=y
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_MAX31790=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_TC654=y
# CONFIG_SENSORS_TPS23861 is not set
CONFIG_SENSORS_MENF21BMC_HWMON=y
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM73=y
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=y
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
CONFIG_SENSORS_NCT7802=y
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_NPCM7XX=y
# CONFIG_SENSORS_NSA320 is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_OCC_P9_SBE is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set
# CONFIG_SENSORS_ADM1266 is not set
CONFIG_SENSORS_ADM1275=y
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
CONFIG_SENSORS_IBM_CFFPS=y
# CONFIG_SENSORS_DPS920AB is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
CONFIG_SENSORS_IR38064=y
# CONFIG_SENSORS_IR38064_REGULATOR is not set
# CONFIG_SENSORS_IRPS5401 is not set
CONFIG_SENSORS_ISL68137=y
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_LT7182S is not set
# CONFIG_SENSORS_LTC2978 is not set
# CONFIG_SENSORS_LTC3815 is not set
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=y
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
CONFIG_SENSORS_MAX31785=y
CONFIG_SENSORS_MAX34440=y
# CONFIG_SENSORS_MAX8688 is not set
# CONFIG_SENSORS_MP2888 is not set
# CONFIG_SENSORS_MP2975 is not set
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PLI1209BC is not set
# CONFIG_SENSORS_PM6764TR is not set
CONFIG_SENSORS_PXE1610=y
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
CONFIG_SENSORS_TPS53679=y
# CONFIG_SENSORS_TPS546D24 is not set
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
# CONFIG_SENSORS_XDPE152 is not set
# CONFIG_SENSORS_XDPE122 is not set
# CONFIG_SENSORS_ZL6100 is not set
# CONFIG_SENSORS_PWM_FAN is not set
# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
# CONFIG_SENSORS_SL28CPLD is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
# CONFIG_SENSORS_SHT4x is not set
CONFIG_SENSORS_SHTC1=y
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
# CONFIG_SENSORS_EMC2305 is not set
CONFIG_SENSORS_EMC6W201=y
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
# CONFIG_SENSORS_SCH5627 is not set
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_STTS751=y
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
# CONFIG_SENSORS_INA238 is not set
CONFIG_SENSORS_INA3221=y
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
# CONFIG_SENSORS_W83792D is not set
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_HWMON is not set
# CONFIG_THERMAL_OF is not set
# CONFIG_THERMAL_WRITABLE_TRIPS is not set
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
# CONFIG_THERMAL_GOV_STEP_WISE is not set
CONFIG_THERMAL_GOV_BANG_BANG=y
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_THERMAL_MMIO=y
CONFIG_HISI_THERMAL=y
# CONFIG_IMX_THERMAL is not set
# CONFIG_IMX8MM_THERMAL is not set
# CONFIG_K3_THERMAL is not set
CONFIG_MAX77620_THERMAL=y
# CONFIG_SPEAR_THERMAL is not set
# CONFIG_SUN8I_THERMAL is not set
# CONFIG_ROCKCHIP_THERMAL is not set
# CONFIG_RCAR_THERMAL is not set
# CONFIG_RCAR_GEN3_THERMAL is not set
# CONFIG_RZG2L_THERMAL is not set
# CONFIG_KIRKWOOD_THERMAL is not set
# CONFIG_DOVE_THERMAL is not set
# CONFIG_ARMADA_THERMAL is not set
# CONFIG_DA9062_THERMAL is not set
CONFIG_MTK_THERMAL=y

#
# Intel thermal drivers
#

#
# ACPI INT340X thermal drivers
#
# end of ACPI INT340X thermal drivers
# end of Intel thermal drivers

#
# Broadcom thermal drivers
#
# CONFIG_BRCMSTB_THERMAL is not set
# CONFIG_BCM_NS_THERMAL is not set
# CONFIG_BCM_SR_THERMAL is not set
# end of Broadcom thermal drivers

#
# Texas Instruments thermal drivers
#
# CONFIG_TI_SOC_THERMAL is not set
# end of Texas Instruments thermal drivers

#
# Samsung thermal drivers
#
# end of Samsung thermal drivers

#
# NVIDIA Tegra thermal drivers
#
# CONFIG_TEGRA_SOCTHERM is not set
# CONFIG_TEGRA_BPMP_THERMAL is not set
# CONFIG_TEGRA30_TSENSOR is not set
# end of NVIDIA Tegra thermal drivers

# CONFIG_GENERIC_ADC_THERMAL is not set

#
# Qualcomm thermal drivers
#
# CONFIG_QCOM_SPMI_ADC_TM5 is not set
# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
# end of Qualcomm thermal drivers

# CONFIG_SPRD_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
# CONFIG_DA9052_WATCHDOG is not set
CONFIG_DA9055_WATCHDOG=y
# CONFIG_DA9063_WATCHDOG is not set
# CONFIG_DA9062_WATCHDOG is not set
CONFIG_GPIO_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
CONFIG_MENF21BMC_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
# CONFIG_ZIIRAVE_WATCHDOG is not set
CONFIG_RAVE_SP_WATCHDOG=y
# CONFIG_SL28CPLD_WATCHDOG is not set
# CONFIG_ARMADA_37XX_WATCHDOG is not set
# CONFIG_ASM9260_WATCHDOG is not set
# CONFIG_AT91RM9200_WATCHDOG is not set
# CONFIG_AT91SAM9X_WATCHDOG is not set
# CONFIG_SAMA5D4_WATCHDOG is not set
CONFIG_CADENCE_WATCHDOG=y
# CONFIG_FTWDT010_WATCHDOG is not set
# CONFIG_S3C2410_WATCHDOG is not set
CONFIG_DW_WATCHDOG=y
# CONFIG_EP93XX_WATCHDOG is not set
# CONFIG_OMAP_WATCHDOG is not set
# CONFIG_PNX4008_WATCHDOG is not set
# CONFIG_DAVINCI_WATCHDOG is not set
# CONFIG_K3_RTI_WATCHDOG is not set
# CONFIG_RN5T618_WATCHDOG is not set
# CONFIG_SUNXI_WATCHDOG is not set
# CONFIG_NPCM7XX_WATCHDOG is not set
# CONFIG_STMP3XXX_RTC_WATCHDOG is not set
# CONFIG_TS4800_WATCHDOG is not set
# CONFIG_TS72XX_WATCHDOG is not set
CONFIG_MAX63XX_WATCHDOG=y
CONFIG_MAX77620_WATCHDOG=y
# CONFIG_IMX2_WDT is not set
# CONFIG_IMX7ULP_WDT is not set
# CONFIG_RETU_WATCHDOG is not set
# CONFIG_MOXART_WDT is not set
# CONFIG_ST_LPC_WATCHDOG is not set
# CONFIG_TEGRA_WATCHDOG is not set
# CONFIG_QCOM_WDT is not set
# CONFIG_MESON_GXBB_WATCHDOG is not set
# CONFIG_MESON_WATCHDOG is not set
# CONFIG_MEDIATEK_WATCHDOG is not set
# CONFIG_DIGICOLOR_WATCHDOG is not set
# CONFIG_LPC18XX_WATCHDOG is not set
# CONFIG_RENESAS_WDT is not set
# CONFIG_RENESAS_RZAWDT is not set
# CONFIG_RENESAS_RZN1WDT is not set
# CONFIG_RENESAS_RZG2LWDT is not set
# CONFIG_ASPEED_WATCHDOG is not set
# CONFIG_STPMIC1_WATCHDOG is not set
# CONFIG_UNIPHIER_WATCHDOG is not set
# CONFIG_RTD119X_WATCHDOG is not set
# CONFIG_REALTEK_OTTO_WDT is not set
# CONFIG_SPRD_WATCHDOG is not set
# CONFIG_VISCONTI_WATCHDOG is not set
# CONFIG_MSC313E_WATCHDOG is not set
# CONFIG_APPLE_WATCHDOG is not set
# CONFIG_SUNPLUS_WATCHDOG is not set
CONFIG_ALIM7101_WDT=y
# CONFIG_SC520_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_KEMPLD_WDT=y
# CONFIG_RDC321X_WDT is not set
# CONFIG_BCM47XX_WDT is not set
# CONFIG_BCM2835_WDT is not set
# CONFIG_BCM_KONA_WDT is not set
# CONFIG_BCM7038_WDT is not set
# CONFIG_IMGPDC_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_MEN_A21_WDT is not set
# CONFIG_UML_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
CONFIG_MFD_AS3722=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_MADERA=y
CONFIG_MFD_MADERA_I2C=y
CONFIG_MFD_CS47L15=y
# CONFIG_MFD_CS47L35 is not set
CONFIG_MFD_CS47L85=y
CONFIG_MFD_CS47L90=y
# CONFIG_MFD_CS47L92 is not set
# CONFIG_MFD_ASIC3 is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_DA9150=y
CONFIG_MFD_DLN2=y
# CONFIG_MFD_ENE_KB3930 is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_I2C=y
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_MFD_HI6421_SPMI is not set
# CONFIG_MFD_HI655X_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_IQS62X is not set
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
CONFIG_MFD_MAX77620=y
CONFIG_MFD_MAX77650=y
CONFIG_MFD_MAX77686=y
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
CONFIG_MFD_MENF21BMC=y
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_SPMI_PMIC is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
CONFIG_MFD_SEC_CORE=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SL28CPLD is not set
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
CONFIG_ABX500_CORE=y
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SUN6I_PRCM is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_OMAP_USB_HOST=y
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
# CONFIG_TPS6507X is not set
CONFIG_MFD_TPS65086=y
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TI_LP87565=y
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TC3589X is not set
CONFIG_MFD_TQMX86=y
CONFIG_MFD_VX855=y
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_STW481X is not set
CONFIG_MFD_ROHM_BD718XX=y
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
CONFIG_MFD_STPMIC1=y
CONFIG_MFD_STMFX=y
# CONFIG_MFD_WCD934X is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_KHADAS_MCU is not set
# CONFIG_MFD_ACER_A500_EC is not set
# CONFIG_MFD_QCOM_PM8008 is not set
CONFIG_RAVE_SP_CORE=y
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=y
# CONFIG_REGULATOR_88PM800 is not set
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=y
CONFIG_REGULATOR_ARIZONA_MICSUPP=y
CONFIG_REGULATOR_AS3722=y
# CONFIG_REGULATOR_AXP20X is not set
CONFIG_REGULATOR_BCM590XX=y
# CONFIG_REGULATOR_BD718XX is not set
# CONFIG_REGULATOR_BD9571MWV is not set
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
# CONFIG_REGULATOR_DA9062 is not set
# CONFIG_REGULATOR_DA9121 is not set
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_FAN53880 is not set
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_ISL9305=y
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
# CONFIG_REGULATOR_LP872X is not set
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LP87565 is not set
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_LTC3676=y
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX77620 is not set
# CONFIG_REGULATOR_MAX77650 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8893 is not set
CONFIG_REGULATOR_MAX8907=y
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX8998 is not set
# CONFIG_REGULATOR_MAX20086 is not set
CONFIG_REGULATOR_MAX77686=y
# CONFIG_REGULATOR_MAX77693 is not set
CONFIG_REGULATOR_MAX77802=y
# CONFIG_REGULATOR_MAX77826 is not set
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
# CONFIG_REGULATOR_MC13892 is not set
CONFIG_REGULATOR_MCP16502=y
# CONFIG_REGULATOR_MP5416 is not set
# CONFIG_REGULATOR_MP8859 is not set
# CONFIG_REGULATOR_MP886X is not set
# CONFIG_REGULATOR_MPQ7920 is not set
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_MT6315 is not set
CONFIG_REGULATOR_PALMAS=y
# CONFIG_REGULATOR_PBIAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
# CONFIG_REGULATOR_PF8X00 is not set
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_QCOM_RPMH is not set
CONFIG_REGULATOR_QCOM_SPMI=y
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
# CONFIG_REGULATOR_RT4801 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6190 is not set
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
CONFIG_REGULATOR_S2MPA01=y
# CONFIG_REGULATOR_S2MPS11 is not set
CONFIG_REGULATOR_S5M8767=y
# CONFIG_REGULATOR_SC2731 is not set
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_SLG51000=y
# CONFIG_REGULATOR_STM32_BOOSTER is not set
# CONFIG_REGULATOR_STM32_VREFBUF is not set
# CONFIG_REGULATOR_STM32_PWR is not set
# CONFIG_REGULATOR_STPMIC1 is not set
# CONFIG_REGULATOR_TI_ABB is not set
# CONFIG_REGULATOR_STW481X_VMMC is not set
CONFIG_REGULATOR_SY8106A=y
# CONFIG_REGULATOR_SY8824X is not set
# CONFIG_REGULATOR_SY8827N is not set
# CONFIG_REGULATOR_TPS51632 is not set
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS6286X is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65086=y
CONFIG_REGULATOR_TPS65132=y
# CONFIG_REGULATOR_TPS65217 is not set
# CONFIG_REGULATOR_TPS68470 is not set
# CONFIG_REGULATOR_UNIPHIER is not set
CONFIG_REGULATOR_VCTRL=y
CONFIG_REGULATOR_WM8400=y
# CONFIG_REGULATOR_QCOM_LABIBB is not set
CONFIG_RC_CORE=y
# CONFIG_BPF_LIRC_MODE2 is not set
CONFIG_LIRC=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=y
CONFIG_IR_JVC_DECODER=y
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_IR_NEC_DECODER is not set
# CONFIG_IR_RC5_DECODER is not set
CONFIG_IR_RC6_DECODER=y
# CONFIG_IR_RCMM_DECODER is not set
# CONFIG_IR_SANYO_DECODER is not set
CONFIG_IR_SHARP_DECODER=y
# CONFIG_IR_SONY_DECODER is not set
# CONFIG_IR_XMP_DECODER is not set
# CONFIG_RC_DEVICES is not set
CONFIG_CEC_CORE=y
CONFIG_CEC_NOTIFIER=y

#
# CEC support
#
# CONFIG_MEDIA_CEC_RC is not set
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_MESON_AO is not set
# CONFIG_CEC_MESON_G12A_AO is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SAMSUNG_S5P is not set
# CONFIG_CEC_STI is not set
# CONFIG_CEC_STM32 is not set
# CONFIG_CEC_TEGRA is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support

CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_SUPPORT_FILTER=y
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Media device types
#
# CONFIG_MEDIA_CAMERA_SUPPORT is not set
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
# CONFIG_MEDIA_TEST_SUPPORT is not set
# end of Media device types

CONFIG_VIDEO_DEV=y

#
# Video4Linux options
#
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_V4L2_FLASH_LED_CLASS is not set
CONFIG_V4L2_FWNODE=y
CONFIG_V4L2_ASYNC=y
# end of Video4Linux options

#
# Media drivers
#

#
# Drivers filtered as selected at 'Filter media drivers'
#

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_V4L2=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
# end of Media drivers

#
# Media ancillary drivers
#

#
# IR I2C driver auto-selected by 'Autoselect ancillary drivers'
#
CONFIG_VIDEO_IR_I2C=y

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_CS3308 is not set
CONFIG_VIDEO_CS5345=y
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_MSP3400 is not set
CONFIG_VIDEO_SONY_BTF_MPX=y
# CONFIG_VIDEO_TDA1997X is not set
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_TLV320AIC23B=y
CONFIG_VIDEO_TVAUDIO=y
# CONFIG_VIDEO_UDA1342 is not set
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_WM8775=y
# end of Audio decoders, processors and mixers

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
CONFIG_VIDEO_ADV7183=y
# CONFIG_VIDEO_ADV748X is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
# CONFIG_VIDEO_ISL7998X is not set
CONFIG_VIDEO_KS0127=y
# CONFIG_VIDEO_MAX9286 is not set
CONFIG_VIDEO_ML86V7667=y
# CONFIG_VIDEO_SAA7110 is not set
CONFIG_VIDEO_SAA711X=y
# CONFIG_VIDEO_TC358743 is not set
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=y
CONFIG_VIDEO_TW2804=y
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
CONFIG_VIDEO_TW9910=y
CONFIG_VIDEO_VPX3220=y

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders

#
# Video encoders
#
# CONFIG_VIDEO_AD9389B is not set
CONFIG_VIDEO_ADV7170=y
# CONFIG_VIDEO_ADV7175 is not set
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=y
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_SAA7127 is not set
CONFIG_VIDEO_SAA7185=y
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
# end of Audio/Video compression chips

#
# SDR tuner chips
#
# end of SDR tuner chips

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_I2C=y
CONFIG_VIDEO_M52790=y
# CONFIG_VIDEO_ST_MIPID02 is not set
CONFIG_VIDEO_THS7303=y
# end of Miscellaneous helper chips

CONFIG_MEDIA_TUNER=y

#
# Customize TV tuners
#
# CONFIG_MEDIA_TUNER_E4000 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_FC2580=y
CONFIG_MEDIA_TUNER_IT913X=y
# CONFIG_MEDIA_TUNER_M88RS6000T is not set
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_MC44S803=y
# CONFIG_MEDIA_TUNER_MT2060 is not set
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MXL301RF=y
CONFIG_MEDIA_TUNER_MXL5005S=y
# CONFIG_MEDIA_TUNER_MXL5007T is not set
CONFIG_MEDIA_TUNER_QM1D1B0004=y
CONFIG_MEDIA_TUNER_QM1D1C0042=y
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_R820T is not set
# CONFIG_MEDIA_TUNER_SI2157 is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_TDA18250=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_XC5000=y
# end of Customize TV tuners
# end of Media ancillary drivers

#
# Graphics support
#
CONFIG_VIDEO_NOMODESET=y
# CONFIG_IMX_IPUV3_CORE is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DEBUG_MM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DP_AUX_BUS=y
CONFIG_DRM_DISPLAY_HELPER=y
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_DISPLAY_HDMI_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=y
CONFIG_DRM_VRAM_HELPER=y
CONFIG_DRM_TTM_HELPER=y
CONFIG_DRM_GEM_DMA_HELPER=y
CONFIG_DRM_GEM_SHMEM_HELPER=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_I2C_NXP_TDA9950=y
# end of I2C encoder or helper chips

#
# ARM devices
#
# CONFIG_DRM_HDLCD is not set
# CONFIG_DRM_MALI_DISPLAY is not set
CONFIG_DRM_KOMEDA=y
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_NOUVEAU_DEBUG_MMU=y
# CONFIG_NOUVEAU_DEBUG_PUSH is not set
# CONFIG_DRM_NOUVEAU_BACKLIGHT is not set
# CONFIG_DRM_KMB_DISPLAY is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VKMS=y
# CONFIG_DRM_EXYNOS is not set
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_USE_LVDS is not set
# CONFIG_DRM_RCAR_USE_MIPI_DSI is not set
# CONFIG_DRM_RZG2L_MIPI_DSI is not set
# CONFIG_DRM_SUN4I is not set
CONFIG_DRM_QXL=y
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_PANEL_ARM_VERSATILE=y
# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
# CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0 is not set
# CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set
# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
# CONFIG_DRM_PANEL_DSI_CM is not set
CONFIG_DRM_PANEL_LVDS=y
# CONFIG_DRM_PANEL_EBBG_FT8719 is not set
# CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set
# CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02 is not set
CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D=y
CONFIG_DRM_PANEL_ILITEK_ILI9881C=y
CONFIG_DRM_PANEL_INNOLUX_P079ZCA=y
# CONFIG_DRM_PANEL_JADARD_JD9365DA_H3 is not set
CONFIG_DRM_PANEL_JDI_LT070ME05000=y
# CONFIG_DRM_PANEL_JDI_R63452 is not set
# CONFIG_DRM_PANEL_KHADAS_TS050 is not set
# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set
# CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829 is not set
# CONFIG_DRM_PANEL_NEWVISION_NV3051D is not set
# CONFIG_DRM_PANEL_NOVATEK_NT35510 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set
# CONFIG_DRM_PANEL_NOVATEK_NT36672A is not set
# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO=y
# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set
# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=y
# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
CONFIG_DRM_PANEL_RAYDIUM_RM68200=y
# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y
CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=y
CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=y
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
# CONFIG_DRM_PANEL_SAMSUNG_SOFEF00 is not set
CONFIG_DRM_PANEL_SEIKO_43WVF1G=y
CONFIG_DRM_PANEL_SHARP_LQ101R1SX01=y
CONFIG_DRM_PANEL_SHARP_LS037V7DW01=y
CONFIG_DRM_PANEL_SHARP_LS043T1LE01=y
# CONFIG_DRM_PANEL_SHARP_LS060T1SX01 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
# CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521 is not set
# CONFIG_DRM_PANEL_TDO_TL070WSH30 is not set
CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=y
# CONFIG_DRM_PANEL_VISIONOX_RM69299 is not set
# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_CROS_EC_ANX7688 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_FSL_LDB is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NWL_MIPI_DSI is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
CONFIG_DRM_SIL_SII8620=y
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
CONFIG_DRM_TOSHIBA_TC358767=y
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
CONFIG_DRM_TI_TFP410=y
# CONFIG_DRM_TI_SN65DSI83 is not set
CONFIG_DRM_TI_SN65DSI86=y
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
CONFIG_DRM_I2C_ADV7511=y
CONFIG_DRM_I2C_ADV7511_AUDIO=y
# CONFIG_DRM_I2C_ADV7511_CEC is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# CONFIG_DRM_IMX8QM_LDB is not set
# CONFIG_DRM_IMX8QXP_LDB is not set
# CONFIG_DRM_IMX8QXP_PIXEL_COMBINER is not set
# CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI is not set
# end of Display Interface Bridges

# CONFIG_DRM_V3D is not set
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_LOGICVC is not set
CONFIG_DRM_MXS=y
CONFIG_DRM_MXSFB=y
# CONFIG_DRM_IMX_LCDIF is not set
CONFIG_DRM_ARCPGU=y
CONFIG_DRM_BOCHS=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_GM12U320=y
# CONFIG_DRM_OFDRM is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_PL111 is not set
# CONFIG_DRM_LIMA is not set
# CONFIG_DRM_ASPEED_GFX is not set
# CONFIG_DRM_TIDSS is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_SPRD is not set
CONFIG_DRM_LEGACY=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
CONFIG_FB_BIG_ENDIAN=y
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CLPS711X is not set
# CONFIG_FB_IMX is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
# CONFIG_FB_ARC is not set
# CONFIG_FB_CONTROL is not set
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_GBE is not set
# CONFIG_FB_PVR2 is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_ATMEL is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=y
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
# CONFIG_FB_WM8505 is not set
# CONFIG_FB_PXA168 is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_SH_MOBILE_LCDC is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_S3C is not set
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_DA8XX is not set
CONFIG_FB_VIRTUAL=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
CONFIG_FB_SM712=y
CONFIG_FB_OMAP_LCD_H3=y
# CONFIG_FB_OMAP2 is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_LM3533 is not set
# CONFIG_BACKLIGHT_OMAP1 is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP5520 is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_LP8788=y
# CONFIG_BACKLIGHT_SKY81452 is not set
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_BACKLIGHT_RAVE_SP=y
# CONFIG_BACKLIGHT_LED is not set
# end of Backlight & LCD device support

CONFIG_VGASTATE=y
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y

#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

# CONFIG_DRM_ACCEL is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_ELD=y
CONFIG_SND_PCM_IEC958=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_SEQ_DEVICE=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_CTL_FAST_LOOKUP=y
# CONFIG_SND_DEBUG is not set
# CONFIG_SND_CTL_INPUT_VALIDATION is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_CTL_LED=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_SEQ_MIDI_EVENT=y
CONFIG_SND_SEQ_MIDI=y
CONFIG_SND_SEQ_MIDI_EMUL=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL3_LIB_SEQ=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
CONFIG_SND_ATIIXP=y
CONFIG_SND_ATIIXP_MODEM=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
CONFIG_SND_AU8830=y
# CONFIG_SND_AW2 is not set
CONFIG_SND_BT87X=y
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
CONFIG_SND_CMIPCI=y
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_CTXFI=y
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
CONFIG_SND_LAYLA24=y
# CONFIG_SND_MONA is not set
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
CONFIG_SND_INDIGO=y
CONFIG_SND_INDIGOIO=y
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_INDIGOIOX=y
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=y

#
# Don't forget to add built-in firmwares for HDSP driver
#
# CONFIG_SND_HDSPM is not set
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_KORG1212=y
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
CONFIG_SND_MIXART=y
CONFIG_SND_NM256=y
CONFIG_SND_PCXHR=y
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
CONFIG_SND_RME9652=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=y
CONFIG_SND_YMFPCI=y

#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
CONFIG_SND_HDA_CODEC_VIA=y
# CONFIG_SND_HDA_CODEC_HDMI is not set
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CS8409 is not set
CONFIG_SND_HDA_CODEC_CONEXANT=y
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# end of HD-Audio

CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_INTEL_DSP_CONFIG=y
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
# CONFIG_SND_SOC_ADI is not set
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_AMD_ACP_CONFIG is not set
# CONFIG_SND_SOC_APPLE_MCA is not set
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_BCM2835_SOC_I2S is not set
# CONFIG_SND_SOC_CYGNUS is not set
# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
# CONFIG_SND_EP93XX_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
CONFIG_SND_SOC_FSL_SAI=y
# CONFIG_SND_SOC_FSL_MQS is not set
CONFIG_SND_SOC_FSL_AUDMIX=y
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
CONFIG_SND_SOC_FSL_ESAI=y
# CONFIG_SND_SOC_FSL_MICFIL is not set
# CONFIG_SND_SOC_FSL_EASRC is not set
# CONFIG_SND_SOC_FSL_XCVR is not set
# CONFIG_SND_SOC_FSL_AUD2HTX is not set
CONFIG_SND_SOC_FSL_UTILS=y
# CONFIG_SND_SOC_FSL_RPMSG is not set
CONFIG_SND_SOC_IMX_AUDMUX=y
# CONFIG_SND_IMX_SOC is not set
# end of SoC Audio for Freescale CPUs

CONFIG_SND_I2S_HI6210_I2S=y
# CONFIG_SND_JZ4740_SOC_I2S is not set
# CONFIG_SND_KIRKWOOD_SOC is not set
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
# CONFIG_SND_SOC_INTEL_KEEMBAY is not set
# CONFIG_SND_SOC_INTEL_AVS is not set
CONFIG_SND_SOC_INTEL_MACH=y
# CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set
# CONFIG_SND_SOC_MT8186 is not set
CONFIG_SND_SOC_MTK_BTCVSD=y
# CONFIG_SND_SOC_MT8195 is not set

#
# ASoC support for Amlogic platforms
#
# CONFIG_SND_MESON_AIU is not set
# CONFIG_SND_MESON_AXG_FRDDR is not set
# CONFIG_SND_MESON_AXG_TODDR is not set
# CONFIG_SND_MESON_AXG_TDMIN is not set
# CONFIG_SND_MESON_AXG_TDMOUT is not set
# CONFIG_SND_MESON_AXG_SOUND_CARD is not set
# CONFIG_SND_MESON_AXG_SPDIFOUT is not set
# CONFIG_SND_MESON_AXG_SPDIFIN is not set
# CONFIG_SND_MESON_AXG_PDM is not set
# CONFIG_SND_MESON_GX_SOUND_CARD is not set
# CONFIG_SND_MESON_G12A_TOACODEC is not set
# CONFIG_SND_MESON_G12A_TOHDMITX is not set
# CONFIG_SND_SOC_MESON_T9015 is not set
# end of ASoC support for Amlogic platforms

# CONFIG_SND_MXS_SOC is not set
# CONFIG_SND_PXA2XX_SOC is not set
# CONFIG_SND_SOC_QCOM is not set
# CONFIG_SND_SOC_ROCKCHIP is not set
# CONFIG_SND_SOC_SAMSUNG is not set

#
# SoC Audio support for Renesas SoCs
#
# CONFIG_SND_SOC_SH4_FSI is not set
# CONFIG_SND_SOC_RCAR is not set
# CONFIG_SND_SOC_RZ is not set
# end of SoC Audio support for Renesas SoCs

CONFIG_SND_SOC_SOF_TOPLEVEL=y
# CONFIG_SND_SOC_SOF_PCI is not set
# CONFIG_SND_SOC_SOF_ACPI is not set
# CONFIG_SND_SOC_SOF_OF is not set
# CONFIG_SND_SOC_SOF_AMD_TOPLEVEL is not set
# CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL is not set
# CONFIG_SND_SOC_SPRD is not set
# CONFIG_SND_SOC_STI is not set

#
# STMicroelectronics STM32 SOC audio support
#
# CONFIG_SND_SOC_STM32_SAI is not set
# CONFIG_SND_SOC_STM32_I2S is not set
# CONFIG_SND_SOC_STM32_SPDIFRX is not set
# end of STMicroelectronics STM32 SOC audio support

#
# Allwinner SoC Audio support
#
# CONFIG_SND_SUN4I_CODEC is not set
# CONFIG_SND_SUN8I_CODEC is not set
# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
# CONFIG_SND_SUN4I_I2S is not set
# CONFIG_SND_SUN4I_SPDIF is not set
# CONFIG_SND_SUN50I_DMIC is not set
# end of Allwinner SoC Audio support

# CONFIG_SND_SOC_TEGRA is not set

#
# Audio support for Texas Instruments SoCs
#

#
# Texas Instruments DAI support for:
#
# CONFIG_SND_SOC_DAVINCI_ASP is not set
# CONFIG_SND_SOC_DAVINCI_MCASP is not set
# CONFIG_SND_SOC_DAVINCI_VCIF is not set
# CONFIG_SND_SOC_OMAP_DMIC is not set
# CONFIG_SND_SOC_OMAP_MCBSP is not set
# CONFIG_SND_SOC_OMAP_MCPDM is not set

#
# Audio support for boards with Texas Instruments SoCs
#
# CONFIG_SND_SOC_OMAP_HDMI is not set
# CONFIG_SND_SOC_J721E_EVM is not set
# end of Audio support for Texas Instruments SoCs

# CONFIG_SND_SOC_UNIPHIER is not set
# CONFIG_SND_SOC_XILINX_I2S is not set
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
CONFIG_SND_SOC_XILINX_SPDIF=y
# CONFIG_SND_SOC_XTFPGA_I2S is not set
CONFIG_SND_SOC_I2C_AND_SPI=y

#
# CODEC drivers
#
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU_UTILS=y
# CONFIG_SND_SOC_ADAU1372_I2C is not set
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
CONFIG_SND_SOC_ADAU7002=y
# CONFIG_SND_SOC_ADAU7118_HW is not set
# CONFIG_SND_SOC_ADAU7118_I2C is not set
CONFIG_SND_SOC_AK4118=y
# CONFIG_SND_SOC_AK4375 is not set
# CONFIG_SND_SOC_AK4458 is not set
CONFIG_SND_SOC_AK4554=y
CONFIG_SND_SOC_AK4613=y
CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_AW8738 is not set
# CONFIG_SND_SOC_BD28623 is not set
CONFIG_SND_SOC_BT_SCO=y
# CONFIG_SND_SOC_CPCAP is not set
CONFIG_SND_SOC_CS35L32=y
# CONFIG_SND_SOC_CS35L33 is not set
# CONFIG_SND_SOC_CS35L34 is not set
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS35L36=y
# CONFIG_SND_SOC_CS35L41_I2C is not set
# CONFIG_SND_SOC_CS35L45_I2C is not set
CONFIG_SND_SOC_CS42L42_CORE=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
# CONFIG_SND_SOC_CS42L52 is not set
CONFIG_SND_SOC_CS42L56=y
CONFIG_SND_SOC_CS42L73=y
# CONFIG_SND_SOC_CS42L83 is not set
# CONFIG_SND_SOC_CS4234 is not set
CONFIG_SND_SOC_CS4265=y
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
CONFIG_SND_SOC_CS42XX8=y
CONFIG_SND_SOC_CS42XX8_I2C=y
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4341=y
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_CX2072X=y
# CONFIG_SND_SOC_JZ4740_CODEC is not set
# CONFIG_SND_SOC_JZ4725B_CODEC is not set
# CONFIG_SND_SOC_JZ4760_CODEC is not set
# CONFIG_SND_SOC_JZ4770_CODEC is not set
# CONFIG_SND_SOC_DA7213 is not set
CONFIG_SND_SOC_DMIC=y
CONFIG_SND_SOC_HDMI_CODEC=y
CONFIG_SND_SOC_ES7134=y
CONFIG_SND_SOC_ES7241=y
CONFIG_SND_SOC_ES8316=y
# CONFIG_SND_SOC_ES8326 is not set
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
# CONFIG_SND_SOC_GTM601 is not set
# CONFIG_SND_SOC_HDA is not set
# CONFIG_SND_SOC_ICS43432 is not set
CONFIG_SND_SOC_INNO_RK3036=y
# CONFIG_SND_SOC_LOCHNAGAR_SC is not set
CONFIG_SND_SOC_MAX98088=y
CONFIG_SND_SOC_MAX98357A=y
CONFIG_SND_SOC_MAX98504=y
CONFIG_SND_SOC_MAX9867=y
# CONFIG_SND_SOC_MAX98927 is not set
# CONFIG_SND_SOC_MAX98520 is not set
# CONFIG_SND_SOC_MAX98373_I2C is not set
# CONFIG_SND_SOC_MAX98373_SDW is not set
# CONFIG_SND_SOC_MAX98390 is not set
# CONFIG_SND_SOC_MAX98396 is not set
CONFIG_SND_SOC_MAX9860=y
# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM3060=y
CONFIG_SND_SOC_PCM3060_I2C=y
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM5102A is not set
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
# CONFIG_SND_SOC_RK3328 is not set
# CONFIG_SND_SOC_RK817 is not set
# CONFIG_SND_SOC_RT1308_SDW is not set
# CONFIG_SND_SOC_RT1316_SDW is not set
# CONFIG_SND_SOC_RT1318_SDW is not set
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
# CONFIG_SND_SOC_RT5640 is not set
# CONFIG_SND_SOC_RT5659 is not set
# CONFIG_SND_SOC_RT5682_SDW is not set
# CONFIG_SND_SOC_RT700_SDW is not set
# CONFIG_SND_SOC_RT711_SDW is not set
# CONFIG_SND_SOC_RT711_SDCA_SDW is not set
# CONFIG_SND_SOC_RT715_SDW is not set
# CONFIG_SND_SOC_RT715_SDCA_SDW is not set
# CONFIG_SND_SOC_RT9120 is not set
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=y
# CONFIG_SND_SOC_SIMPLE_MUX is not set
CONFIG_SND_SOC_SPDIF=y
# CONFIG_SND_SOC_SRC4XXX_I2C is not set
CONFIG_SND_SOC_SSM2305=y
# CONFIG_SND_SOC_SSM2518 is not set
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
CONFIG_SND_SOC_STA350=y
CONFIG_SND_SOC_STI_SAS=y
CONFIG_SND_SOC_TAS2552=y
# CONFIG_SND_SOC_TAS2562 is not set
# CONFIG_SND_SOC_TAS2764 is not set
# CONFIG_SND_SOC_TAS2770 is not set
# CONFIG_SND_SOC_TAS2780 is not set
CONFIG_SND_SOC_TAS5086=y
CONFIG_SND_SOC_TAS571X=y
# CONFIG_SND_SOC_TAS5720 is not set
# CONFIG_SND_SOC_TAS5805M is not set
CONFIG_SND_SOC_TAS6424=y
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
# CONFIG_SND_SOC_TFA989X is not set
# CONFIG_SND_SOC_TLV320ADC3XXX is not set
CONFIG_SND_SOC_TLV320AIC23=y
CONFIG_SND_SOC_TLV320AIC23_I2C=y
# CONFIG_SND_SOC_TLV320AIC31XX is not set
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
# CONFIG_SND_SOC_TLV320AIC3X_I2C is not set
# CONFIG_SND_SOC_TLV320ADCX140 is not set
# CONFIG_SND_SOC_TS3A227E is not set
CONFIG_SND_SOC_TSCS42XX=y
# CONFIG_SND_SOC_TSCS454 is not set
# CONFIG_SND_SOC_UDA1334 is not set
CONFIG_SND_SOC_WCD9335=y
# CONFIG_SND_SOC_WCD934X is not set
# CONFIG_SND_SOC_WCD938X_SDW is not set
CONFIG_SND_SOC_WM8510=y
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8524 is not set
# CONFIG_SND_SOC_WM8580 is not set
CONFIG_SND_SOC_WM8711=y
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731_I2C is not set
# CONFIG_SND_SOC_WM8737 is not set
CONFIG_SND_SOC_WM8741=y
CONFIG_SND_SOC_WM8750=y
# CONFIG_SND_SOC_WM8753 is not set
CONFIG_SND_SOC_WM8776=y
# CONFIG_SND_SOC_WM8782 is not set
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
CONFIG_SND_SOC_WM8903=y
# CONFIG_SND_SOC_WM8904 is not set
# CONFIG_SND_SOC_WM8940 is not set
CONFIG_SND_SOC_WM8960=y
# CONFIG_SND_SOC_WM8961 is not set
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8974=y
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
# CONFIG_SND_SOC_WSA881X is not set
# CONFIG_SND_SOC_WSA883X is not set
CONFIG_SND_SOC_MAX9759=y
# CONFIG_SND_SOC_MT6351 is not set
# CONFIG_SND_SOC_MT6358 is not set
# CONFIG_SND_SOC_MT6660 is not set
# CONFIG_SND_SOC_NAU8315 is not set
# CONFIG_SND_SOC_NAU8540 is not set
CONFIG_SND_SOC_NAU8810=y
# CONFIG_SND_SOC_NAU8821 is not set
CONFIG_SND_SOC_NAU8822=y
CONFIG_SND_SOC_NAU8824=y
# CONFIG_SND_SOC_TPA6130A2 is not set
# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
# CONFIG_SND_SOC_LPASS_TX_MACRO is not set
# end of CODEC drivers

CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SND_AUDIO_GRAPH_CARD=y
# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
# CONFIG_SND_TEST_COMPONENT is not set
# CONFIG_SND_VIRTIO is not set
CONFIG_AC97_BUS=y

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
CONFIG_HID_ACCUTOUCH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=y
CONFIG_HID_ASUS=y
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BETOP_FF=y
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CMEDIA=y
CONFIG_HID_CP2112=y
CONFIG_HID_CREATIVE_SB0540=y
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELAN=y
CONFIG_HID_ELECOM=y
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_FT260 is not set
CONFIG_HID_GEMBIRD=y
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
CONFIG_HID_HOLTEK=y
CONFIG_HOLTEK_FF=y
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=y
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
CONFIG_HID_REDRAGON=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PENMOUNT=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
CONFIG_HID_PRIMAX=y
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=y
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEAM=y
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
# CONFIG_HID_TOPRE is not set
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_U2FZERO=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
# end of USB HID support

#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_ELAN is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support

#
# Intel ISH HID support
#
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
CONFIG_USB_ULPI_BUS=y
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_PCI is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
CONFIG_USB_XHCI_PLATFORM=y
# CONFIG_USB_XHCI_HISTB is not set
# CONFIG_USB_XHCI_MTK is not set
# CONFIG_USB_XHCI_MVEBU is not set
# CONFIG_USB_XHCI_RCAR is not set
# CONFIG_USB_BRCMSTB is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
# CONFIG_USB_EHCI_HCD_NPCM7XX is not set
CONFIG_USB_EHCI_HCD_OMAP=y
# CONFIG_USB_EHCI_HCD_ORION is not set
# CONFIG_USB_EHCI_HCD_SPEAR is not set
# CONFIG_USB_EHCI_HCD_STI is not set
# CONFIG_USB_EHCI_HCD_AT91 is not set
# CONFIG_USB_EHCI_SH is not set
# CONFIG_USB_EHCI_EXYNOS is not set
# CONFIG_USB_EHCI_MV is not set
# CONFIG_USB_CNS3XXX_EHCI is not set
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SPEAR is not set
# CONFIG_USB_OHCI_HCD_STI is not set
# CONFIG_USB_OHCI_HCD_S3C2410 is not set
CONFIG_USB_OHCI_HCD_LPC32XX=y
# CONFIG_USB_OHCI_HCD_AT91 is not set
# CONFIG_USB_OHCI_HCD_OMAP3 is not set
# CONFIG_USB_OHCI_HCD_DAVINCI is not set
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_SH is not set
# CONFIG_USB_OHCI_EXYNOS is not set
# CONFIG_USB_CNS3XXX_OHCI is not set
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_HCD_ISO is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_HCD_SSB=y
# CONFIG_USB_HCD_TEST_MODE is not set
# CONFIG_USB_RENESAS_USBHS is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=y
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_STORAGE_ENE_UB6250=y
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
# CONFIG_USBIP_CORE is not set

#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_FOTG210 is not set
# CONFIG_USB_MTU3 is not set
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y

#
# Platform Glue Layer
#
# CONFIG_USB_MUSB_TUSB6010 is not set
# CONFIG_USB_MUSB_DSPS is not set
# CONFIG_USB_MUSB_UX500 is not set
# CONFIG_USB_MUSB_MEDIATEK is not set
# CONFIG_USB_MUSB_POLARFIRE_SOC is not set

#
# MUSB DMA mode
#
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_ULPI is not set
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_EXYNOS=y
CONFIG_USB_DWC3_KEYSTONE=y
CONFIG_USB_DWC3_MESON_G12A=y
CONFIG_USB_DWC3_OF_SIMPLE=y
CONFIG_USB_DWC3_ST=y
CONFIG_USB_DWC3_QCOM=y
CONFIG_USB_DWC3_IMX8MP=y
CONFIG_USB_DWC3_XILINX=y
CONFIG_USB_DWC3_AM62=y
CONFIG_USB_DWC2=y
# CONFIG_USB_DWC2_HOST is not set

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PERIPHERAL is not set
CONFIG_USB_DWC2_DUAL_ROLE=y
# CONFIG_USB_DWC2_DEBUG is not set
CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
# CONFIG_USB_CHIPIDEA_HOST is not set
CONFIG_USB_CHIPIDEA_MSM=y
CONFIG_USB_CHIPIDEA_IMX=y
CONFIG_USB_CHIPIDEA_GENERIC=y
CONFIG_USB_CHIPIDEA_TEGRA=y
CONFIG_USB_ISP1760=y
CONFIG_USB_ISP1761_UDC=y
# CONFIG_USB_ISP1760_HOST_ROLE is not set
CONFIG_USB_ISP1760_GADGET_ROLE=y
# CONFIG_USB_ISP1760_DUAL_ROLE is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_F8153X=y
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_IPW=y
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=y
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_MXUPORT=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
# CONFIG_USB_SERIAL_QUALCOMM is not set
CONFIG_USB_SERIAL_SPCP8X5=y
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
# CONFIG_USB_SERIAL_CYBERJACK is not set
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_SSU100=y
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_UPD78F0730=y
# CONFIG_USB_SERIAL_XR is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_QCOM_EUD is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
CONFIG_USB_SISUSBVGA=y
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
# CONFIG_USB_EZUSB_FX2 is not set
CONFIG_USB_HUB_USB251XB=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_HSIC_USB4604=y
CONFIG_USB_LINK_LAYER_TEST=y
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_BRCM_USB_PINMAP is not set
# CONFIG_USB_ONBOARD_HUB is not set
# CONFIG_USB_ATM is not set

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
# CONFIG_KEYSTONE_USB_PHY is not set
CONFIG_NOP_USB_XCEIV=y
# CONFIG_AM335X_PHY_USB is not set
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
# CONFIG_TAHVO_USB_HOST_BY_DEFAULT is not set
CONFIG_USB_ISP1301=y
# CONFIG_USB_TEGRA_PHY is not set
# CONFIG_USB_ULPI is not set
# end of USB Physical Layer drivers

CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_LPC32XX is not set
CONFIG_USB_FUSB300=y
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
# CONFIG_USB_RENESAS_USB3 is not set
# CONFIG_USB_PXA27X is not set
CONFIG_USB_MV_UDC=y
# CONFIG_USB_MV_U3D is not set
CONFIG_USB_SNP_CORE=y
CONFIG_USB_SNP_UDC_PLAT=y
# CONFIG_USB_M66592 is not set
CONFIG_USB_BDC_UDC=y
CONFIG_USB_NET2272=y
# CONFIG_USB_NET2272_DMA is not set
CONFIG_USB_GADGET_XILINX=y
CONFIG_USB_DUMMY_HCD=y
# end of USB Peripheral Controller

# CONFIG_USB_CONFIGFS is not set

#
# USB Gadget precomposed configurations
#
# CONFIG_USB_ZERO is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
# CONFIG_USB_RAW_GADGET is not set
# end of USB Gadget precomposed configurations

# CONFIG_TYPEC is not set
CONFIG_USB_ROLE_SWITCH=y
CONFIG_MMC=y
# CONFIG_PWRSEQ_EMMC is not set
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_SUNPLUS is not set
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_SDHCI_S3C is not set
# CONFIG_MMC_SDHCI_SPEAR is not set
# CONFIG_MMC_MESON_GX is not set
# CONFIG_MMC_MESON_MX_SDHC is not set
# CONFIG_MMC_MESON_MX_SDIO is not set
# CONFIG_MMC_MOXART is not set
# CONFIG_MMC_OMAP_HS is not set
CONFIG_MMC_TIFM_SD=y
# CONFIG_MMC_DAVINCI is not set
# CONFIG_MMC_S3C is not set
# CONFIG_MMC_TMIO is not set
# CONFIG_MMC_SDHI is not set
# CONFIG_MMC_UNIPHIER is not set
# CONFIG_MMC_CB710 is not set
CONFIG_MMC_VIA_SDMMC=y
# CONFIG_MMC_DW is not set
# CONFIG_MMC_SH_MMCIF is not set
CONFIG_MMC_VUB300=y
# CONFIG_MMC_USHC is not set
CONFIG_MMC_USDHI6ROL0=y
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_CQHCI=y
# CONFIG_MMC_HSQ is not set
CONFIG_MMC_TOSHIBA_PCI=y
# CONFIG_MMC_BCM2835 is not set
CONFIG_MMC_MTK=y
# CONFIG_MMC_OWL is not set
# CONFIG_MMC_LITEX is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_MEMSTICK_REALTEK_PCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_ARIEL is not set
# CONFIG_LEDS_AW2013 is not set
CONFIG_LEDS_BCM6328=y
CONFIG_LEDS_BCM6358=y
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
CONFIG_LEDS_LM3533=y
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_LM3692X=y
# CONFIG_LEDS_S3C24XX is not set
# CONFIG_LEDS_COBALT_QUBE is not set
# CONFIG_LEDS_COBALT_RAQ is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP3952=y
# CONFIG_LEDS_LP50XX is not set
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
# CONFIG_LEDS_LP8788 is not set
CONFIG_LEDS_LP8860=y
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_DA903X=y
CONFIG_LEDS_DA9052=y
# CONFIG_LEDS_PWM is not set
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_NS2=y
CONFIG_LEDS_NETXBIG=y
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_MAX77650 is not set
# CONFIG_LEDS_MAX8997 is not set
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_MENF21BMC is not set
CONFIG_LEDS_IS31FL319X=y
CONFIG_LEDS_IS31FL32XX=y

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_SYSCON is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
CONFIG_LEDS_TI_LMU_COMMON=y
# CONFIG_LEDS_LM3697 is not set
# CONFIG_LEDS_IP30 is not set
# CONFIG_LEDS_BCM63138 is not set
# CONFIG_LEDS_LGM is not set

#
# Flash and Torch LED drivers
#
CONFIG_LEDS_AAT1290=y
CONFIG_LEDS_AS3645A=y
# CONFIG_LEDS_KTD2692 is not set
# CONFIG_LEDS_LM3601X is not set
# CONFIG_LEDS_RT4505 is not set
# CONFIG_LEDS_RT8515 is not set
# CONFIG_LEDS_SGM3140 is not set

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
# CONFIG_LEDS_TRIGGER_PANIC is not set
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_LEDS_TRIGGER_PATTERN=y
CONFIG_LEDS_TRIGGER_AUDIO=y
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set

#
# Speakup console speech
#
CONFIG_SPEAKUP=y
CONFIG_SPEAKUP_SERIALIO=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=y
# CONFIG_SPEAKUP_SYNTH_ACNTPC is not set
CONFIG_SPEAKUP_SYNTH_APOLLO=y
# CONFIG_SPEAKUP_SYNTH_AUDPTR is not set
CONFIG_SPEAKUP_SYNTH_BNS=y
CONFIG_SPEAKUP_SYNTH_DECTLK=y
CONFIG_SPEAKUP_SYNTH_DECEXT=y
# CONFIG_SPEAKUP_SYNTH_DTLK is not set
# CONFIG_SPEAKUP_SYNTH_KEYPC is not set
CONFIG_SPEAKUP_SYNTH_LTLK=y
CONFIG_SPEAKUP_SYNTH_SOFT=y
CONFIG_SPEAKUP_SYNTH_SPKOUT=y
CONFIG_SPEAKUP_SYNTH_TXPRT=y
CONFIG_SPEAKUP_SYNTH_DUMMY=y
# end of Speakup console speech

CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM80X=y
# CONFIG_RTC_DRV_ABB5ZES3 is not set
CONFIG_RTC_DRV_ABEOZ9=y
CONFIG_RTC_DRV_ABX80X=y
# CONFIG_RTC_DRV_BRCMSTB is not set
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1374_WDT=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_HYM8563=y
CONFIG_RTC_DRV_LP8788=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8998=y
# CONFIG_RTC_DRV_MAX8997 is not set
CONFIG_RTC_DRV_MAX77686=y
# CONFIG_RTC_DRV_NCT3018Y is not set
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_ISL12026=y
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8523 is not set
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF85363=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_PALMAS=y
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8010=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3028=y
# CONFIG_RTC_DRV_RV3032 is not set
CONFIG_RTC_DRV_RV8803=y
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_SD3078=y

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_DS3232_HWMON=y
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=y
# CONFIG_RTC_DRV_RV3029_HWMON is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1685_FAMILY=y
CONFIG_RTC_DRV_DS1685=y
# CONFIG_RTC_DRV_DS1689 is not set
# CONFIG_RTC_DRV_DS17285 is not set
# CONFIG_RTC_DRV_DS17485 is not set
# CONFIG_RTC_DRV_DS17885 is not set
# CONFIG_RTC_DRV_DS1742 is not set
CONFIG_RTC_DRV_DS2404=y
# CONFIG_RTC_DRV_DA9052 is not set
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=y
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_GAMECUBE is not set
# CONFIG_RTC_DRV_SC27XX is not set
CONFIG_RTC_DRV_SPEAR=y
# CONFIG_RTC_DRV_ZYNQMP is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_ASM9260 is not set
# CONFIG_RTC_DRV_DIGICOLOR is not set
# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
# CONFIG_RTC_DRV_MESON is not set
# CONFIG_RTC_DRV_MESON_VRTC is not set
# CONFIG_RTC_DRV_OMAP is not set
# CONFIG_RTC_DRV_S3C is not set
# CONFIG_RTC_DRV_EP93XX is not set
# CONFIG_RTC_DRV_AT91RM9200 is not set
# CONFIG_RTC_DRV_AT91SAM9 is not set
# CONFIG_RTC_DRV_RZN1 is not set
# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_RTC_DRV_VT8500 is not set
# CONFIG_RTC_DRV_SUN6I is not set
# CONFIG_RTC_DRV_SUNXI is not set
# CONFIG_RTC_DRV_MV is not set
# CONFIG_RTC_DRV_ARMADA38X is not set
CONFIG_RTC_DRV_CADENCE=y
CONFIG_RTC_DRV_FTRTC010=y
# CONFIG_RTC_DRV_STMP is not set
# CONFIG_RTC_DRV_MC13XXX is not set
# CONFIG_RTC_DRV_JZ4740 is not set
# CONFIG_RTC_DRV_LPC24XX is not set
# CONFIG_RTC_DRV_LPC32XX is not set
# CONFIG_RTC_DRV_PM8XXX is not set
# CONFIG_RTC_DRV_TEGRA is not set
# CONFIG_RTC_DRV_MXC is not set
# CONFIG_RTC_DRV_MXC_V2 is not set
CONFIG_RTC_DRV_SNVS=y
# CONFIG_RTC_DRV_MOXART is not set
# CONFIG_RTC_DRV_MT2712 is not set
# CONFIG_RTC_DRV_MT6397 is not set
# CONFIG_RTC_DRV_MT7622 is not set
# CONFIG_RTC_DRV_XGENE is not set
CONFIG_RTC_DRV_R7301=y
# CONFIG_RTC_DRV_STM32 is not set
# CONFIG_RTC_DRV_RTD119X is not set
# CONFIG_RTC_DRV_ASPEED is not set
# CONFIG_RTC_DRV_TI_K3 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_RTC_DRV_MSC313 is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
# CONFIG_DMADEVICES_VDEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_ALTERA_MSGDMA=y
# CONFIG_APPLE_ADMAC is not set
# CONFIG_AXI_DMAC is not set
# CONFIG_DMA_JZ4780 is not set
# CONFIG_DMA_SA11X0 is not set
# CONFIG_DMA_SUN6I is not set
CONFIG_DW_AXI_DMAC=y
# CONFIG_EP93XX_DMA is not set
CONFIG_FSL_EDMA=y
# CONFIG_IMG_MDC_DMA is not set
CONFIG_INTEL_IDMA64=y
# CONFIG_K3_DMA is not set
# CONFIG_MCF_EDMA is not set
# CONFIG_MILBEAUT_HDMAC is not set
# CONFIG_MILBEAUT_XDMAC is not set
# CONFIG_MMP_PDMA is not set
# CONFIG_MMP_TDMA is not set
# CONFIG_MV_XOR is not set
# CONFIG_MXS_DMA is not set
# CONFIG_NBPFAXI_DMA is not set
# CONFIG_PCH_DMA is not set
# CONFIG_PLX_DMA is not set
# CONFIG_STM32_DMA is not set
# CONFIG_STM32_DMAMUX is not set
# CONFIG_STM32_MDMA is not set
# CONFIG_SPRD_DMA is not set
# CONFIG_S3C24XX_DMAC is not set
# CONFIG_TEGRA20_APB_DMA is not set
# CONFIG_TEGRA210_ADMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_UNIPHIER_MDMAC is not set
# CONFIG_UNIPHIER_XDMAC is not set
# CONFIG_XGENE_DMA is not set
# CONFIG_XILINX_ZYNQMP_DMA is not set
# CONFIG_XILINX_ZYNQMP_DPDMA is not set
# CONFIG_MTK_HSDMA is not set
# CONFIG_MTK_CQDMA is not set
# CONFIG_QCOM_ADM is not set
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_RZN1_DMAMUX is not set
CONFIG_DW_DMAC_PCI=y
CONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set
CONFIG_RENESAS_DMA=y
CONFIG_SH_DMAE_BASE=y
# CONFIG_SH_DMAE is not set
# CONFIG_RCAR_DMAC is not set
# CONFIG_RENESAS_USB_DMAC is not set
# CONFIG_RZ_DMAC is not set
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_TI_DMA_CROSSBAR=y
# CONFIG_INTEL_LDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
CONFIG_DMABUF_SELFTESTS=y
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VFIO=y
CONFIG_VFIO_CONTAINER=y
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI is not set
# CONFIG_VFIO_PLATFORM is not set
CONFIG_VFIO_MDEV=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VSOCK is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=y
CONFIG_GREYBUS_ES2=y
CONFIG_COMEDI=y
# CONFIG_COMEDI_DEBUG is not set
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
# CONFIG_COMEDI_ISA_DRIVERS is not set
CONFIG_COMEDI_PCI_DRIVERS=y
# CONFIG_COMEDI_8255_PCI is not set
CONFIG_COMEDI_ADDI_WATCHDOG=y
# CONFIG_COMEDI_ADDI_APCI_1032 is not set
CONFIG_COMEDI_ADDI_APCI_1500=y
CONFIG_COMEDI_ADDI_APCI_1516=y
# CONFIG_COMEDI_ADDI_APCI_1564 is not set
# CONFIG_COMEDI_ADDI_APCI_16XX is not set
# CONFIG_COMEDI_ADDI_APCI_2032 is not set
CONFIG_COMEDI_ADDI_APCI_2200=y
CONFIG_COMEDI_ADDI_APCI_3120=y
CONFIG_COMEDI_ADDI_APCI_3501=y
CONFIG_COMEDI_ADDI_APCI_3XXX=y
CONFIG_COMEDI_ADL_PCI6208=y
CONFIG_COMEDI_ADL_PCI7X3X=y
CONFIG_COMEDI_ADL_PCI8164=y
CONFIG_COMEDI_ADL_PCI9111=y
CONFIG_COMEDI_ADL_PCI9118=y
CONFIG_COMEDI_ADV_PCI1710=y
CONFIG_COMEDI_ADV_PCI1720=y
CONFIG_COMEDI_ADV_PCI1723=y
# CONFIG_COMEDI_ADV_PCI1724 is not set
CONFIG_COMEDI_ADV_PCI1760=y
CONFIG_COMEDI_ADV_PCI_DIO=y
CONFIG_COMEDI_AMPLC_DIO200_PCI=y
CONFIG_COMEDI_AMPLC_PC236_PCI=y
# CONFIG_COMEDI_AMPLC_PC263_PCI is not set
# CONFIG_COMEDI_AMPLC_PCI224 is not set
CONFIG_COMEDI_AMPLC_PCI230=y
CONFIG_COMEDI_CONTEC_PCI_DIO=y
CONFIG_COMEDI_DAS08_PCI=y
CONFIG_COMEDI_DT3000=y
CONFIG_COMEDI_DYNA_PCI10XX=y
CONFIG_COMEDI_GSC_HPDI=y
CONFIG_COMEDI_MF6X4=y
# CONFIG_COMEDI_ICP_MULTI is not set
CONFIG_COMEDI_DAQBOARD2000=y
CONFIG_COMEDI_JR3_PCI=y
CONFIG_COMEDI_KE_COUNTER=y
CONFIG_COMEDI_CB_PCIDAS64=y
CONFIG_COMEDI_CB_PCIDAS=y
CONFIG_COMEDI_CB_PCIDDA=y
# CONFIG_COMEDI_CB_PCIMDAS is not set
CONFIG_COMEDI_CB_PCIMDDA=y
CONFIG_COMEDI_ME4000=y
CONFIG_COMEDI_ME_DAQ=y
# CONFIG_COMEDI_NI_6527 is not set
CONFIG_COMEDI_NI_65XX=y
CONFIG_COMEDI_NI_660X=y
# CONFIG_COMEDI_NI_670X is not set
CONFIG_COMEDI_NI_LABPC_PCI=y
CONFIG_COMEDI_NI_PCIDIO=y
# CONFIG_COMEDI_NI_PCIMIO is not set
CONFIG_COMEDI_RTD520=y
CONFIG_COMEDI_S626=y
CONFIG_COMEDI_MITE=y
CONFIG_COMEDI_NI_TIOCMD=y
# CONFIG_COMEDI_USB_DRIVERS is not set
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=y
CONFIG_COMEDI_KCOMEDILIB=y
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=y
CONFIG_COMEDI_NI_LABPC=y
CONFIG_COMEDI_NI_TIO=y
CONFIG_COMEDI_NI_ROUTING=y
# CONFIG_COMEDI_TESTS is not set
CONFIG_STAGING=y
# CONFIG_RTS5208 is not set
# CONFIG_OCTEON_ETHERNET is not set

#
# IIO staging drivers
#

#
# Accelerometers
#
# end of Accelerometers

#
# Analog to digital converters
#
# end of Analog to digital converters

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_I2C=y
# end of Analog digital bi-direction converters

#
# Direct Digital Synthesis
#
# end of Direct Digital Synthesis

#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
# end of Network Analyzer, Impedance Converters

#
# Active energy metering IC
#
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
# end of Active energy metering IC

#
# Resolver to digital converters
#
# end of Resolver to digital converters
# end of IIO staging drivers

CONFIG_FB_SM750=y
# CONFIG_USB_EMXX is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_VIDEO_IMX_MEDIA is not set
# CONFIG_VIDEO_IMX8MQ_MIPI_CSI2 is not set
# CONFIG_VIDEO_MAX96712 is not set
# CONFIG_VIDEO_MESON_VDEC is not set
# CONFIG_VIDEO_OMAP4 is not set
# CONFIG_VIDEO_ROCKCHIP_VDEC is not set
# CONFIG_VIDEO_SUNXI is not set
# CONFIG_STAGING_MEDIA_DEPRECATED is not set
# CONFIG_STAGING_BOARD is not set
# CONFIG_MOST_COMPONENTS is not set
# CONFIG_GREYBUS_AUDIO is not set
CONFIG_GREYBUS_BOOTROM=y
# CONFIG_GREYBUS_HID is not set
# CONFIG_GREYBUS_LIGHT is not set
CONFIG_GREYBUS_LOG=y
CONFIG_GREYBUS_LOOPBACK=y
# CONFIG_GREYBUS_POWER is not set
CONFIG_GREYBUS_RAW=y
CONFIG_GREYBUS_VIBRATOR=y
# CONFIG_GREYBUS_BRIDGED_PHY is not set
# CONFIG_GREYBUS_ARCHE is not set
CONFIG_BCM_VIDEOCORE=y
# CONFIG_BCM2835_VCHIQ is not set
# CONFIG_SND_BCM2835 is not set
# CONFIG_VIDEO_BCM2835 is not set
CONFIG_XIL_AXIS_FIFO=y
# CONFIG_FIELDBUS_DEV is not set
CONFIG_QLGE=y
# CONFIG_VME_BUS is not set
# CONFIG_GOLDFISH is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
CONFIG_SURFACE_PLATFORMS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Clock driver for ARM Reference designs
#
# CONFIG_CLK_ICST is not set
# CONFIG_CLK_SP810 is not set
# end of Clock driver for ARM Reference designs

# CONFIG_CLK_HSDK is not set
# CONFIG_COMMON_CLK_APPLE_NCO is not set
# CONFIG_COMMON_CLK_MAX77686 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SCMI is not set
# CONFIG_COMMON_CLK_SCPI is not set
CONFIG_COMMON_CLK_SI5341=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI514=y
# CONFIG_COMMON_CLK_SI544 is not set
CONFIG_COMMON_CLK_SI570=y
# CONFIG_COMMON_CLK_BM1880 is not set
CONFIG_COMMON_CLK_CDCE706=y
# CONFIG_COMMON_CLK_TPS68470 is not set
# CONFIG_COMMON_CLK_CDCE925 is not set
CONFIG_COMMON_CLK_CS2000_CP=y
# CONFIG_COMMON_CLK_EN7523 is not set
# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
# CONFIG_COMMON_CLK_FSL_SAI is not set
# CONFIG_COMMON_CLK_GEMINI is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_ASPEED is not set
CONFIG_COMMON_CLK_S2MPS11=y
# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
# CONFIG_CLK_QORIQ is not set
# CONFIG_CLK_LS1028A_PLLDIG is not set
# CONFIG_COMMON_CLK_XGENE is not set
# CONFIG_COMMON_CLK_PALMAS is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_COMMON_CLK_OXNAS is not set
# CONFIG_COMMON_CLK_RS9_PCIE is not set
CONFIG_COMMON_CLK_VC5=y
# CONFIG_COMMON_CLK_VC7 is not set
# CONFIG_COMMON_CLK_MMP2_AUDIO is not set
CONFIG_COMMON_CLK_BD718XX=y
CONFIG_COMMON_CLK_FIXED_MMIO=y
# CONFIG_CLK_ACTIONS is not set
# CONFIG_CLK_BAIKAL_T1 is not set
# CONFIG_CLK_BCM2711_DVP is not set
# CONFIG_CLK_BCM2835 is not set
# CONFIG_CLK_BCM_63XX is not set
# CONFIG_CLK_BCM_63XX_GATE is not set
# CONFIG_CLK_BCM_KONA is not set
# CONFIG_CLK_BCM_CYGNUS is not set
# CONFIG_CLK_BCM_HR2 is not set
# CONFIG_CLK_BCM_NSP is not set
# CONFIG_CLK_BCM_NS2 is not set
# CONFIG_CLK_BCM_SR is not set
# CONFIG_CLK_RASPBERRYPI is not set
# CONFIG_COMMON_CLK_HI3516CV300 is not set
# CONFIG_COMMON_CLK_HI3519 is not set
# CONFIG_COMMON_CLK_HI3559A is not set
# CONFIG_COMMON_CLK_HI3660 is not set
# CONFIG_COMMON_CLK_HI3670 is not set
# CONFIG_COMMON_CLK_HI3798CV200 is not set
# CONFIG_COMMON_CLK_HI6220 is not set
# CONFIG_RESET_HISI is not set
# CONFIG_COMMON_CLK_BOSTON is not set
# CONFIG_MXC_CLK is not set
# CONFIG_CLK_IMX8MM is not set
# CONFIG_CLK_IMX8MN is not set
# CONFIG_CLK_IMX8MP is not set
# CONFIG_CLK_IMX8MQ is not set
# CONFIG_CLK_IMX8ULP is not set
# CONFIG_CLK_IMX93 is not set

#
# Ingenic SoCs drivers
#
# CONFIG_INGENIC_CGU_JZ4740 is not set
# CONFIG_INGENIC_CGU_JZ4755 is not set
# CONFIG_INGENIC_CGU_JZ4725B is not set
# CONFIG_INGENIC_CGU_JZ4760 is not set
# CONFIG_INGENIC_CGU_JZ4770 is not set
# CONFIG_INGENIC_CGU_JZ4780 is not set
# CONFIG_INGENIC_CGU_X1000 is not set
# CONFIG_INGENIC_CGU_X1830 is not set
# CONFIG_INGENIC_TCU_CLK is not set
# end of Ingenic SoCs drivers

# CONFIG_COMMON_CLK_KEYSTONE is not set
# CONFIG_TI_SYSCON_CLK is not set

#
# Clock driver for MediaTek SoC
#
# CONFIG_COMMON_CLK_MEDIATEK_FHCTL is not set
# CONFIG_COMMON_CLK_MT2701 is not set
# CONFIG_COMMON_CLK_MT2712 is not set
# CONFIG_COMMON_CLK_MT6765 is not set
# CONFIG_COMMON_CLK_MT6779 is not set
# CONFIG_COMMON_CLK_MT6795 is not set
# CONFIG_COMMON_CLK_MT6797 is not set
# CONFIG_COMMON_CLK_MT7622 is not set
# CONFIG_COMMON_CLK_MT7629 is not set
# CONFIG_COMMON_CLK_MT7986 is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8167 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
# CONFIG_COMMON_CLK_MT8183 is not set
# CONFIG_COMMON_CLK_MT8186 is not set
# CONFIG_COMMON_CLK_MT8192 is not set
# CONFIG_COMMON_CLK_MT8195 is not set
# CONFIG_COMMON_CLK_MT8365 is not set
# CONFIG_COMMON_CLK_MT8516 is not set
# end of Clock driver for MediaTek SoC

#
# Clock support for Amlogic platforms
#
# end of Clock support for Amlogic platforms

# CONFIG_MSTAR_MSC313_CPUPLL is not set
# CONFIG_MSTAR_MSC313_MPLL is not set
# CONFIG_MCHP_CLK_MPFS is not set
# CONFIG_COMMON_CLK_PISTACHIO is not set
# CONFIG_COMMON_CLK_QCOM is not set
# CONFIG_CLK_MT7621 is not set
# CONFIG_CLK_RENESAS is not set
# CONFIG_COMMON_CLK_SAMSUNG is not set
# CONFIG_S3C2410_COMMON_CLK is not set
# CONFIG_S3C2412_COMMON_CLK is not set
# CONFIG_S3C2443_COMMON_CLK is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_INTEL_SOCFPGA is not set
# CONFIG_SPRD_COMMON_CLK is not set
# CONFIG_CLK_STARFIVE_JH7100 is not set
CONFIG_CLK_SUNXI=y
CONFIG_CLK_SUNXI_CLOCKS=y
CONFIG_CLK_SUNXI_PRCM_SUN6I=y
CONFIG_CLK_SUNXI_PRCM_SUN8I=y
CONFIG_CLK_SUNXI_PRCM_SUN9I=y
# CONFIG_SUNXI_CCU is not set
# CONFIG_COMMON_CLK_TI_ADPLL is not set
# CONFIG_CLK_UNIPHIER is not set
# CONFIG_COMMON_CLK_VISCONTI is not set
# CONFIG_CLK_LGM_CGU is not set
CONFIG_XILINX_VCU=y
CONFIG_COMMON_CLK_XLNX_CLKWZRD=y
# CONFIG_COMMON_CLK_ZYNQMP is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_SUN5I_HSTIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_TEGRA186_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_CADENCE_TTC_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_TI_32K is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_CLKSRC_MPS2 is not set
# CONFIG_ARC_TIMERS is not set
# CONFIG_ARM_TIMER_SP804 is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_CLKSRC_JCORE_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_VERSATILE is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_INGENIC_TIMER is not set
# CONFIG_INGENIC_SYSOST is not set
# CONFIG_INGENIC_OST is not set
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

CONFIG_MAILBOX=y
# CONFIG_IMX_MBOX is not set
CONFIG_PLATFORM_MHU=y
# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
# CONFIG_ROCKCHIP_MBOX is not set
CONFIG_ALTERA_MBOX=y
CONFIG_MAILBOX_TEST=y
# CONFIG_POLARFIRE_SOC_MAILBOX is not set
# CONFIG_QCOM_APCS_IPC is not set
# CONFIG_BCM_PDC_MBOX is not set
# CONFIG_STM32_IPCC is not set
# CONFIG_MTK_ADSP_MBOX is not set
# CONFIG_MTK_CMDQ_MBOX is not set
# CONFIG_SUN6I_MSGBOX is not set
# CONFIG_SPRD_MBOX is not set
# CONFIG_QCOM_IPCC is not set
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# CONFIG_INGENIC_VPU_RPROC is not set
# CONFIG_MTK_SCP is not set
# CONFIG_MESON_MX_AO_ARC_REMOTEPROC is not set
# CONFIG_RCAR_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
# CONFIG_RPMSG_CHAR is not set
# CONFIG_RPMSG_CTRL is not set
CONFIG_RPMSG_NS=y
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=y

#
# SoundWire Devices
#
# CONFIG_SOUNDWIRE_QCOM is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
# CONFIG_APPLE_RTKIT is not set
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers

# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set

#
# Broadcom SoC drivers
#
# CONFIG_BCM2835_POWER is not set
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# CONFIG_BCM_PMB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
CONFIG_DPAA2_CONSOLE=y
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

# CONFIG_LOONGSON2_GUTS is not set

#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_PMIC_WRAP is not set
# CONFIG_MTK_SCPSYS is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SMD_RPM is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_WCNSS_CTRL is not set
# CONFIG_QCOM_APR is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers

# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_ROCKCHIP_IODOMAIN is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set
# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
# CONFIG_ARM_TEGRA_DEVFREQ is not set
# CONFIG_ARM_MEDIATEK_CCI_DEVFREQ is not set
# CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ is not set
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_ADC_JACK is not set
CONFIG_EXTCON_FSA9480=y
# CONFIG_EXTCON_GPIO is not set
CONFIG_EXTCON_MAX3355=y
# CONFIG_EXTCON_MAX8997 is not set
# CONFIG_EXTCON_PALMAS is not set
CONFIG_EXTCON_PTN5150=y
# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
CONFIG_EXTCON_RT8973A=y
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
# CONFIG_IIO_BUFFER_DMA is not set
# CONFIG_IIO_BUFFER_DMAENGINE is not set
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
# CONFIG_IIO_SW_TRIGGER is not set
# CONFIG_IIO_TRIGGERED_EVENT is not set

#
# Accelerometers
#
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL355_I2C is not set
# CONFIG_ADXL367_I2C is not set
CONFIG_ADXL372=y
CONFIG_ADXL372_I2C=y
# CONFIG_BMA180 is not set
# CONFIG_BMA400 is not set
# CONFIG_BMC150_ACCEL is not set
CONFIG_DA280=y
# CONFIG_DA311 is not set
CONFIG_DMARD06=y
CONFIG_DMARD09=y
# CONFIG_DMARD10 is not set
# CONFIG_FXLS8962AF_I2C is not set
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
# CONFIG_IIO_KX022A_I2C is not set
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=y
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7660 is not set
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
CONFIG_MMA9553=y
# CONFIG_MSA311 is not set
CONFIG_MXC4005=y
# CONFIG_MXC6255 is not set
# CONFIG_STK8312 is not set
CONFIG_STK8BA50=y
# end of Accelerometers

#
# Analog to digital converters
#
# CONFIG_AD7091R5 is not set
CONFIG_AD7291=y
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD799X=y
# CONFIG_ADI_AXI_ADC is not set
# CONFIG_ASPEED_ADC is not set
# CONFIG_AT91_ADC is not set
# CONFIG_AT91_SAMA5D2_ADC is not set
CONFIG_AXP20X_ADC=y
# CONFIG_AXP288_ADC is not set
# CONFIG_BCM_IPROC_ADC is not set
# CONFIG_BERLIN2_ADC is not set
# CONFIG_CC10001_ADC is not set
CONFIG_DA9150_GPADC=y
# CONFIG_DLN2_ADC is not set
CONFIG_ENVELOPE_DETECTOR=y
# CONFIG_EXYNOS_ADC is not set
CONFIG_HX711=y
# CONFIG_INGENIC_ADC is not set
# CONFIG_IMX7D_ADC is not set
# CONFIG_IMX8QXP_ADC is not set
CONFIG_LP8788_ADC=y
# CONFIG_LPC18XX_ADC is not set
# CONFIG_LPC32XX_ADC is not set
CONFIG_LTC2471=y
CONFIG_LTC2485=y
# CONFIG_LTC2497 is not set
# CONFIG_MAX1363 is not set
CONFIG_MAX9611=y
CONFIG_MCP3422=y
# CONFIG_MEDIATEK_MT6577_AUXADC is not set
# CONFIG_MESON_SARADC is not set
# CONFIG_NAU7802 is not set
# CONFIG_NPCM_ADC is not set
# CONFIG_PALMAS_GPADC is not set
CONFIG_QCOM_VADC_COMMON=y
CONFIG_QCOM_SPMI_IADC=y
# CONFIG_QCOM_SPMI_VADC is not set
CONFIG_QCOM_SPMI_ADC5=y
# CONFIG_RCAR_GYRO_ADC is not set
# CONFIG_ROCKCHIP_SARADC is not set
# CONFIG_RICHTEK_RTQ6056 is not set
# CONFIG_RZG2L_ADC is not set
# CONFIG_SC27XX_ADC is not set
# CONFIG_SPEAR_ADC is not set
CONFIG_SD_ADC_MODULATOR=y
# CONFIG_STM32_ADC_CORE is not set
# CONFIG_STM32_DFSDM_CORE is not set
# CONFIG_STM32_DFSDM_ADC is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_TI_ADS1015 is not set
CONFIG_TI_AM335X_ADC=y
CONFIG_VF610_ADC=y
# CONFIG_XILINX_XADC is not set
# CONFIG_XILINX_AMS is not set
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=y
# end of Analog Front Ends

#
# Amplifiers
#
# CONFIG_HMC425 is not set
# end of Amplifiers

#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
CONFIG_AD7746=y
# end of Capacitance to digital converters

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_ATLAS_EZO_SENSOR is not set
CONFIG_BME680=y
CONFIG_BME680_I2C=y
# CONFIG_CCS811 is not set
CONFIG_IAQCORE=y
CONFIG_PMS7003=y
# CONFIG_SCD30_CORE is not set
# CONFIG_SCD4X is not set
CONFIG_SENSIRION_SGP30=y
# CONFIG_SENSIRION_SGP40 is not set
# CONFIG_SPS30_I2C is not set
# CONFIG_SPS30_SERIAL is not set
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
CONFIG_VZ89X=y
# end of Chemical Sensors

#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=y

#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
CONFIG_AD5064=y
CONFIG_AD5380=y
# CONFIG_AD5446 is not set
CONFIG_AD5592R_BASE=y
CONFIG_AD5593R=y
CONFIG_AD5686=y
CONFIG_AD5696_I2C=y
# CONFIG_DPOT_DAC is not set
# CONFIG_DS4424 is not set
# CONFIG_LPC18XX_DAC is not set
CONFIG_M62332=y
CONFIG_MAX517=y
# CONFIG_MAX5821 is not set
# CONFIG_MCP4725 is not set
# CONFIG_STM32_DAC is not set
CONFIG_TI_DAC5571=y
# CONFIG_VF610_DAC is not set
# end of Digital to analog converters

#
# IIO dummy driver
#
CONFIG_IIO_SIMPLE_DUMMY=y
# CONFIG_IIO_SIMPLE_DUMMY_EVENTS is not set
# CONFIG_IIO_SIMPLE_DUMMY_BUFFER is not set
# end of IIO dummy driver

#
# Filters
#
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_BMG160=y
CONFIG_BMG160_I2C=y
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_ITG3200=y
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4404=y
# CONFIG_MAX30100 is not set
CONFIG_MAX30102=y
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=y
# CONFIG_DHT11 is not set
CONFIG_HDC100X=y
# CONFIG_HDC2010 is not set
CONFIG_HTS221=y
CONFIG_HTS221_I2C=y
CONFIG_HTU21=y
CONFIG_SI7005=y
# CONFIG_SI7020 is not set
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
# CONFIG_BOSCH_BNO055_SERIAL is not set
# CONFIG_BOSCH_BNO055_I2C is not set
# CONFIG_FXOS8700_I2C is not set
CONFIG_KMX61=y
# CONFIG_INV_ICM42600_I2C is not set
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
# CONFIG_IIO_ST_LSM6DSX is not set
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units

#
# Light sensors
#
# CONFIG_ADJD_S311 is not set
# CONFIG_ADUX1020 is not set
# CONFIG_AL3010 is not set
CONFIG_AL3320A=y
CONFIG_APDS9300=y
CONFIG_APDS9960=y
# CONFIG_AS73211 is not set
CONFIG_BH1750=y
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
CONFIG_CM3323=y
CONFIG_CM3605=y
CONFIG_CM36651=y
# CONFIG_GP2AP002 is not set
CONFIG_GP2AP020A00F=y
# CONFIG_IQS621_ALS is not set
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_SENSORS_ISL29028=y
CONFIG_ISL29125=y
CONFIG_JSA1212=y
# CONFIG_RPR0521 is not set
# CONFIG_SENSORS_LM3533 is not set
# CONFIG_LTR501 is not set
# CONFIG_LTRF216A is not set
CONFIG_LV0104CS=y
CONFIG_MAX44000=y
CONFIG_MAX44009=y
CONFIG_NOA1305=y
CONFIG_OPT3001=y
CONFIG_PA12203001=y
CONFIG_SI1133=y
CONFIG_SI1145=y
CONFIG_STK3310=y
CONFIG_ST_UVIS25=y
CONFIG_ST_UVIS25_I2C=y
CONFIG_TCS3414=y
CONFIG_TCS3472=y
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2591 is not set
# CONFIG_TSL2772 is not set
# CONFIG_TSL4531 is not set
CONFIG_US5182D=y
CONFIG_VCNL4000=y
CONFIG_VCNL4035=y
# CONFIG_VEML6030 is not set
# CONFIG_VEML6070 is not set
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors

#
# Magnetometer sensors
#
# CONFIG_AK8974 is not set
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
# CONFIG_MAG3110 is not set
CONFIG_MMC35240=y
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
# CONFIG_SENSORS_RM3100_I2C is not set
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers

#
# Inclinometer sensors
#
# end of Inclinometer sensors

#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=y
# CONFIG_IIO_STM32_LPTIMER_TRIGGER is not set
# CONFIG_IIO_STM32_TIMER_TRIGGER is not set
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone

#
# Linear and angular position sensors
#
# CONFIG_IQS624_POS is not set
# end of Linear and angular position sensors

#
# Digital potentiometers
#
# CONFIG_AD5110 is not set
# CONFIG_AD5272 is not set
CONFIG_DS1803=y
# CONFIG_MAX5432 is not set
CONFIG_MCP4018=y
CONFIG_MCP4531=y
# CONFIG_TPL0102 is not set
# end of Digital potentiometers

#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set
# end of Digital potentiostats

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
# CONFIG_BMP280 is not set
# CONFIG_DLHL60D is not set
CONFIG_DPS310=y
CONFIG_HP03=y
# CONFIG_ICP10100 is not set
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
# CONFIG_MPL3115 is not set
# CONFIG_MS5611 is not set
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_T5403=y
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
# end of Pressure sensors

#
# Lightning sensors
#
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_ISL29501=y
CONFIG_LIDAR_LITE_V2=y
CONFIG_MB1232=y
# CONFIG_PING is not set
CONFIG_RFD77402=y
# CONFIG_SRF04 is not set
# CONFIG_SX9310 is not set
# CONFIG_SX9324 is not set
# CONFIG_SX9360 is not set
CONFIG_SX9500=y
CONFIG_SRF08=y
# CONFIG_VCNL3020 is not set
CONFIG_VL53L0X_I2C=y
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# end of Resolver to digital converters

#
# Temperature sensors
#
# CONFIG_IQS620AT_TEMP is not set
CONFIG_MLX90614=y
# CONFIG_MLX90632 is not set
CONFIG_TMP006=y
CONFIG_TMP007=y
# CONFIG_TMP117 is not set
CONFIG_TSYS01=y
# CONFIG_TSYS02D is not set
# CONFIG_MAX30208 is not set
# end of Temperature sensors

CONFIG_NTB=y
CONFIG_NTB_IDT=y
CONFIG_NTB_SWITCHTEC=y
# CONFIG_NTB_PINGPONG is not set
CONFIG_NTB_TOOL=y
CONFIG_NTB_PERF=y
# CONFIG_NTB_TRANSPORT is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_ATMEL is not set
# CONFIG_PWM_ATMEL_TCB is not set
# CONFIG_PWM_BCM_IPROC is not set
# CONFIG_PWM_BCM_KONA is not set
# CONFIG_PWM_BCM2835 is not set
# CONFIG_PWM_BERLIN is not set
# CONFIG_PWM_BRCMSTB is not set
# CONFIG_PWM_CLK is not set
# CONFIG_PWM_CLPS711X is not set
# CONFIG_PWM_DWC is not set
# CONFIG_PWM_EP93XX is not set
CONFIG_PWM_FSL_FTM=y
# CONFIG_PWM_HIBVT is not set
# CONFIG_PWM_IMG is not set
# CONFIG_PWM_IMX1 is not set
# CONFIG_PWM_IMX27 is not set
# CONFIG_PWM_IMX_TPM is not set
# CONFIG_PWM_INTEL_LGM is not set
# CONFIG_PWM_IQS620A is not set
# CONFIG_PWM_JZ4740 is not set
# CONFIG_PWM_KEEMBAY is not set
# CONFIG_PWM_LP3943 is not set
# CONFIG_PWM_LPC18XX_SCT is not set
# CONFIG_PWM_LPC32XX is not set
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_MESON is not set
# CONFIG_PWM_MTK_DISP is not set
# CONFIG_PWM_MEDIATEK is not set
# CONFIG_PWM_MXS is not set
# CONFIG_PWM_OMAP_DMTIMER is not set
CONFIG_PWM_PCA9685=y
# CONFIG_PWM_PXA is not set
# CONFIG_PWM_RASPBERRYPI_POE is not set
# CONFIG_PWM_RCAR is not set
# CONFIG_PWM_RENESAS_TPU is not set
# CONFIG_PWM_ROCKCHIP is not set
# CONFIG_PWM_SAMSUNG is not set
# CONFIG_PWM_SIFIVE is not set
# CONFIG_PWM_SL28CPLD is not set
# CONFIG_PWM_SPEAR is not set
# CONFIG_PWM_SPRD is not set
# CONFIG_PWM_STI is not set
# CONFIG_PWM_STM32 is not set
# CONFIG_PWM_STM32_LP is not set
# CONFIG_PWM_SUN4I is not set
# CONFIG_PWM_SUNPLUS is not set
# CONFIG_PWM_TEGRA is not set
# CONFIG_PWM_TIECAP is not set
# CONFIG_PWM_TIEHRPWM is not set
# CONFIG_PWM_VISCONTI is not set
# CONFIG_PWM_VT8500 is not set
# CONFIG_PWM_XILINX is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
CONFIG_MADERA_IRQ=y
# CONFIG_JCORE_AIC is not set
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
# CONFIG_XILINX_INTC is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_IMX_MU_MSI is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_A10SR is not set
# CONFIG_RESET_ATH79 is not set
# CONFIG_RESET_AXS10X is not set
# CONFIG_RESET_BCM6345 is not set
# CONFIG_RESET_BERLIN is not set
# CONFIG_RESET_BRCMSTB is not set
# CONFIG_RESET_BRCMSTB_RESCAL is not set
# CONFIG_RESET_HSDK is not set
# CONFIG_RESET_IMX7 is not set
# CONFIG_RESET_INTEL_GW is not set
# CONFIG_RESET_K210 is not set
# CONFIG_RESET_LANTIQ is not set
# CONFIG_RESET_LPC18XX is not set
# CONFIG_RESET_MCHP_SPARX5 is not set
# CONFIG_RESET_MESON is not set
# CONFIG_RESET_MESON_AUDIO_ARB is not set
# CONFIG_RESET_NPCM is not set
# CONFIG_RESET_PISTACHIO is not set
# CONFIG_RESET_QCOM_AOSS is not set
# CONFIG_RESET_QCOM_PDC is not set
# CONFIG_RESET_RASPBERRYPI is not set
# CONFIG_RESET_RZG2L_USBPHY_CTRL is not set
# CONFIG_RESET_SCMI is not set
# CONFIG_RESET_SIMPLE is not set
# CONFIG_RESET_SOCFPGA is not set
# CONFIG_RESET_STARFIVE_JH7100 is not set
# CONFIG_RESET_SUNPLUS is not set
# CONFIG_RESET_SUNXI is not set
# CONFIG_RESET_TI_SCI is not set
# CONFIG_RESET_TI_SYSCON is not set
# CONFIG_RESET_TI_TPS380X is not set
# CONFIG_RESET_TN48M_CPLD is not set
# CONFIG_RESET_UNIPHIER is not set
# CONFIG_RESET_UNIPHIER_GLUE is not set
# CONFIG_RESET_ZYNQ is not set
# CONFIG_COMMON_RESET_HI3660 is not set
# CONFIG_COMMON_RESET_HI6220 is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PHY_MIPI_DPHY=y
# CONFIG_PHY_LPC18XX_USB_OTG is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_XGENE is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
# CONFIG_PHY_SUN4I_USB is not set
# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
# CONFIG_PHY_SUN9I_USB is not set
# CONFIG_PHY_SUN50I_USB3 is not set
# CONFIG_PHY_MESON8_HDMI_TX is not set
# CONFIG_PHY_MESON8B_USB2 is not set
# CONFIG_PHY_MESON_GXL_USB2 is not set
# CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG is not set
# CONFIG_PHY_MESON_G12A_USB2 is not set
# CONFIG_PHY_MESON_G12A_USB3_PCIE is not set
# CONFIG_PHY_MESON_AXG_PCIE is not set
# CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG is not set
# CONFIG_PHY_MESON_AXG_MIPI_DPHY is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_PHY_CYGNUS_PCIE is not set
# CONFIG_PHY_BCM_SR_USB is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_BCM_NS_USB2 is not set
# CONFIG_PHY_BCM_NS_USB3 is not set
# CONFIG_PHY_NS2_PCIE is not set
# CONFIG_PHY_NS2_USB_DRD is not set
# CONFIG_PHY_BRCM_SATA is not set
# CONFIG_PHY_BRCM_USB is not set
# CONFIG_PHY_BCM_SR_PCIE is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_CADENCE_TORRENT is not set
CONFIG_PHY_CADENCE_DPHY=y
# CONFIG_PHY_CADENCE_DPHY_RX is not set
CONFIG_PHY_CADENCE_SIERRA=y
# CONFIG_PHY_CADENCE_SALVO is not set
CONFIG_PHY_FSL_IMX8MQ_USB=y
# CONFIG_PHY_MIXEL_LVDS_PHY is not set
# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
# CONFIG_PHY_FSL_IMX8M_PCIE is not set
# CONFIG_PHY_FSL_LYNX_28G is not set
# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_INGENIC_USB is not set
# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
# CONFIG_PHY_LANTIQ_RCU_USB2 is not set
# CONFIG_ARMADA375_USBCLUSTER_PHY is not set
# CONFIG_PHY_BERLIN_SATA is not set
# CONFIG_PHY_BERLIN_USB is not set
CONFIG_PHY_MVEBU_A3700_UTMI=y
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
# CONFIG_PHY_MVEBU_CP110_UTMI is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MTK_PCIE is not set
# CONFIG_PHY_MTK_TPHY is not set
# CONFIG_PHY_MTK_UFS is not set
# CONFIG_PHY_MTK_XSPHY is not set
# CONFIG_PHY_MTK_HDMI is not set
# CONFIG_PHY_MTK_MIPI_DSI is not set
# CONFIG_PHY_MTK_DP is not set
# CONFIG_PHY_SPARX5_SERDES is not set
# CONFIG_PHY_LAN966X_SERDES is not set
CONFIG_PHY_CPCAP_USB=y
CONFIG_PHY_MAPPHONE_MDM6600=y
CONFIG_PHY_OCELOT_SERDES=y
CONFIG_PHY_ATH79_USB=y
# CONFIG_PHY_QCOM_EDP is not set
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
# CONFIG_PHY_QCOM_PCIE2 is not set
# CONFIG_PHY_QCOM_QMP is not set
# CONFIG_PHY_QCOM_QUSB2 is not set
CONFIG_PHY_QCOM_USB_HS=y
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
CONFIG_PHY_QCOM_USB_HSIC=y
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
# CONFIG_PHY_QCOM_USB_SS is not set
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_R8A779F0_ETHERNET_SERDES is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set
# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_ROCKCHIP_TYPEC is not set
# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_EXYNOS_PCIE is not set
# CONFIG_PHY_SAMSUNG_UFS is not set
CONFIG_PHY_SAMSUNG_USB2=y
# CONFIG_PHY_S5PV210_USB2 is not set
CONFIG_PHY_EXYNOS5_USBDRD=y
# CONFIG_PHY_UNIPHIER_USB2 is not set
# CONFIG_PHY_UNIPHIER_USB3 is not set
# CONFIG_PHY_UNIPHIER_PCIE is not set
# CONFIG_PHY_UNIPHIER_AHCI is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_STIH407_USB is not set
# CONFIG_PHY_STM32_USBPHYC is not set
# CONFIG_PHY_SUNPLUS_USB is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_PHY_DM816X_USB is not set
# CONFIG_PHY_AM654_SERDES is not set
# CONFIG_PHY_J721E_WIZ is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
CONFIG_PHY_TUSB1210=y
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_COMBO is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_INTEL_THUNDERBAY_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
# CONFIG_RAS is not set
# CONFIG_USB4 is not set

#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
CONFIG_ANDROID_BINDER_IPC_SELFTEST=y
# end of Android

CONFIG_DAX=y
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_APPLE_EFUSES is not set
# CONFIG_NVMEM_BCM_OCOTP is not set
# CONFIG_NVMEM_BRCM_NVRAM is not set
# CONFIG_NVMEM_IMX_IIM is not set
# CONFIG_NVMEM_IMX_OCOTP is not set
# CONFIG_NVMEM_JZ4780_EFUSE is not set
# CONFIG_NVMEM_LAN9662_OTPC is not set
# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
# CONFIG_NVMEM_LPC18XX_EEPROM is not set
# CONFIG_NVMEM_LPC18XX_OTP is not set
# CONFIG_NVMEM_MESON_MX_EFUSE is not set
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
# CONFIG_NVMEM_MTK_EFUSE is not set
# CONFIG_NVMEM_MXS_OCOTP is not set
# CONFIG_NVMEM_NINTENDO_OTP is not set
# CONFIG_NVMEM_QCOM_QFPROM is not set
# CONFIG_NVMEM_RAVE_SP_EEPROM is not set
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_ROCKCHIP_EFUSE is not set
# CONFIG_NVMEM_ROCKCHIP_OTP is not set
# CONFIG_NVMEM_SC27XX_EFUSE is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_NVMEM_SPMI_SDAM is not set
# CONFIG_NVMEM_SPRD_EFUSE is not set
# CONFIG_NVMEM_STM32_ROMEM is not set
# CONFIG_NVMEM_SUNPLUS_OCOTP is not set
# CONFIG_NVMEM_U_BOOT_ENV is not set
# CONFIG_NVMEM_UNIPHIER_EFUSE is not set
# CONFIG_NVMEM_VF610_OCOTP is not set

#
# HW tracing support
#
CONFIG_STM=y
# CONFIG_STM_PROTO_BASIC is not set
CONFIG_STM_PROTO_SYS_T=y
# CONFIG_STM_DUMMY is not set
# CONFIG_STM_SOURCE_CONSOLE is not set
CONFIG_STM_SOURCE_HEARTBEAT=y
CONFIG_INTEL_TH=y
# CONFIG_INTEL_TH_PCI is not set
CONFIG_INTEL_TH_GTH=y
CONFIG_INTEL_TH_STH=y
# CONFIG_INTEL_TH_MSU is not set
CONFIG_INTEL_TH_PTI=y
CONFIG_INTEL_TH_DEBUG=y
# end of HW tracing support

# CONFIG_FPGA is not set
CONFIG_FSI=y
CONFIG_FSI_NEW_DEV_NODE=y
# CONFIG_FSI_MASTER_GPIO is not set
# CONFIG_FSI_MASTER_HUB is not set
# CONFIG_FSI_MASTER_ASPEED is not set
# CONFIG_FSI_SCOM is not set
CONFIG_FSI_SBEFIFO=y
CONFIG_FSI_OCC=y
# CONFIG_TEE is not set
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
CONFIG_MUX_ADG792A=y
CONFIG_MUX_GPIO=y
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers

CONFIG_PM_OPP=y
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
# CONFIG_SLIM_QCOM_CTRL is not set
# CONFIG_SLIM_QCOM_NGD_CTRL is not set
CONFIG_INTERCONNECT=y
# CONFIG_INTERCONNECT_IMX is not set
# CONFIG_INTERCONNECT_QCOM_OSM_L3 is not set
# CONFIG_INTERCONNECT_SAMSUNG is not set
# CONFIG_COUNTER is not set
CONFIG_MOST=y
# CONFIG_MOST_USB_HDM is not set
CONFIG_MOST_CDEV=y
# CONFIG_MOST_SND is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=y
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
# CONFIG_F2FS_FS_POSIX_ACL is not set
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_F2FS_IOSTAT=y
# CONFIG_ZONEFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
CONFIG_OVERLAY_FS_METACOPY=y

#
# Caches
#
CONFIG_NETFS_SUPPORT=y
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# CONFIG_CACHEFILES_ONDEMAND is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
# CONFIG_EXFAT_FS is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=y
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
# CONFIG_JFFS2_ZLIB is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
# CONFIG_JFFS2_CMODE_PRIORITY is not set
CONFIG_JFFS2_CMODE_SIZE=y
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_ZSTD=y
CONFIG_UBIFS_ATIME_SUPPORT=y
# CONFIG_UBIFS_FS_XATTR is not set
CONFIG_UBIFS_FS_AUTHENTICATION=y
CONFIG_CRAMFS=y
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT is not set
CONFIG_SQUASHFS_COMPILE_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
# CONFIG_SQUASHFS_LZO is not set
# CONFIG_SQUASHFS_XZ is not set
# CONFIG_SQUASHFS_ZSTD is not set
CONFIG_SQUASHFS_4K_DEVBLK_SIZE=y
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_MINIX_FS_NATIVE_ENDIAN=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=y
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
# CONFIG_PSTORE_LZO_COMPRESS is not set
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=y
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="lz4"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_PSTORE_BLK is not set
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=y
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_STACK_ALL_PATTERN is not set
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

# CONFIG_RANDSTRUCT_NONE is not set
CONFIG_RANDSTRUCT_FULL=y
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
CONFIG_RANDSTRUCT=y
CONFIG_GCC_PLUGIN_RANDSTRUCT=y
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_FIPS_NAME="Linux Kernel Cryptographic API"
# CONFIG_CRYPTO_FIPS_CUSTOM_VERSION is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ENGINE=y
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
# CONFIG_CRYPTO_DH is not set
CONFIG_CRYPTO_ECC=y
CONFIG_CRYPTO_ECDH=y
# CONFIG_CRYPTO_ECDSA is not set
CONFIG_CRYPTO_ECRDSA=y
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=y
CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_ARIA is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=y
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SM4_GENERIC=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_NHPOLY1305=y
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_ECHAINIV is not set
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
# CONFIG_CRYPTO_BLAKE2B is not set
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=y
# CONFIG_CRYPTO_VMAC is not set
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRC64_ROCKSOFT is not set
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_ALLWINNER is not set
CONFIG_CRYPTO_DEV_HIFN_795X=y
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
# CONFIG_CRYPTO_DEV_EXYNOS_RNG is not set
# CONFIG_CRYPTO_DEV_S5P is not set
# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
CONFIG_CRYPTO_DEV_ATMEL_I2C=y
CONFIG_CRYPTO_DEV_ATMEL_ECC=y
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_QCE is not set
# CONFIG_CRYPTO_DEV_QCOM_RNG is not set
# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
CONFIG_CRYPTO_DEV_VIRTIO=y
CONFIG_CRYPTO_DEV_SAFEXCEL=y
CONFIG_CRYPTO_DEV_CCREE=y
# CONFIG_CRYPTO_DEV_HISI_SEC is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
# CONFIG_CRYPTO_DEV_SA2UL is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_ECC is not set
# CONFIG_CRYPTO_DEV_KEEMBAY_OCS_HCU is not set
# CONFIG_CRYPTO_DEV_ASPEED is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=y
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_ARCH_HAS_STRNLEN_USER=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=y
CONFIG_CRYPTO_LIB_GF128MUL=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
CONFIG_DMA_NONCOHERENT_MMAP=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines

CONFIG_GENERIC_LIB_MULDI3=y
CONFIG_GENERIC_LIB_CMPDI2=y
CONFIG_GENERIC_LIB_UCMPDI2=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options

# CONFIG_DEBUG_KERNEL is not set

#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_FRAME_WARN=8192
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
# CONFIG_MAGIC_SYSRQ_SERIAL is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
CONFIG_KASAN=y
CONFIG_KASAN_GENERIC=y
# CONFIG_KASAN_OUTLINE is not set
CONFIG_KASAN_INLINE=y
CONFIG_KASAN_STACK=y
# end of Memory Debugging

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures

#
# RCU Debugging
#
# end of RCU Debugging

CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
# CONFIG_STRICT_DEVMEM is not set

#
# xtensa Debugging
#
CONFIG_LD_NO_RELAX=y
# CONFIG_S32C1I_SELFTEST is not set
CONFIG_PRINT_STACK_DEPTH=64
# end of xtensa Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_HEXDUMP=y
CONFIG_STRING_SELFTEST=y
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_PRINTF=y
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
CONFIG_TEST_UUID=y
# CONFIG_TEST_XARRAY is not set
CONFIG_TEST_RHASHTABLE=y
CONFIG_TEST_IDA=y
CONFIG_FIND_BIT_BENCHMARK=y
CONFIG_TEST_FIRMWARE=y
CONFIG_TEST_SYSCTL=y
# CONFIG_TEST_UDELAY is not set
CONFIG_TEST_MEMCAT_P=y
CONFIG_TEST_MEMINIT=y
# CONFIG_TEST_FREE_PAGES is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking

# CONFIG_WARN_MISSING_DOCUMENTS is not set
# CONFIG_WARN_ABI_ERRORS is not set
# end of Kernel hacking

Re: [PATCH] net: mdio: force deassert MDIO reset signal

[Dan Carpenter]

Hi Pierluigi,

https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Pierluigi-Passaro/net-mdio-force-deassert-MDIO-reset-signal/20230116-001044
patch link:    https://lore.kernel.org/r/20230115161006.16431-1-pierluigi.p%40variscite.com
patch subject: [PATCH] net: mdio: force deassert MDIO reset signal
config: xtensa-randconfig-m041-20230116
compiler: xtensa-linux-gcc (GCC) 12.1.0

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>
| Reported-by: Dan Carpenter <error27@gmail.com>

smatch warnings:
drivers/net/mdio/fwnode_mdio.c:144 fwnode_mdiobus_register_phy() warn: missing unwind goto?

vim +144 drivers/net/mdio/fwnode_mdio.c

bc1bee3b87ee48 Calvin Johnson    2021-06-11  114  int fwnode_mdiobus_register_phy(struct mii_bus *bus,
bc1bee3b87ee48 Calvin Johnson    2021-06-11  115  				struct fwnode_handle *child, u32 addr)
bc1bee3b87ee48 Calvin Johnson    2021-06-11  116  {
bc1bee3b87ee48 Calvin Johnson    2021-06-11  117  	struct mii_timestamper *mii_ts = NULL;
5e82147de1cbd7 Oleksij Rempel    2022-10-03  118  	struct pse_control *psec = NULL;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  119  	struct phy_device *phy;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  120  	bool is_c45 = false;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  121  	u32 phy_id;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  122  	int rc;
3f08f04af6947d Pierluigi Passaro 2023-01-15  123  	int reset_deassert_delay = 0;
3f08f04af6947d Pierluigi Passaro 2023-01-15  124  	struct gpio_desc *reset_gpio;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  125  
5e82147de1cbd7 Oleksij Rempel    2022-10-03  126  	psec = fwnode_find_pse_control(child);
5e82147de1cbd7 Oleksij Rempel    2022-10-03  127  	if (IS_ERR(psec))
5e82147de1cbd7 Oleksij Rempel    2022-10-03  128  		return PTR_ERR(psec);
5e82147de1cbd7 Oleksij Rempel    2022-10-03  129  
bc1bee3b87ee48 Calvin Johnson    2021-06-11  130  	mii_ts = fwnode_find_mii_timestamper(child);
5e82147de1cbd7 Oleksij Rempel    2022-10-03  131  	if (IS_ERR(mii_ts)) {
5e82147de1cbd7 Oleksij Rempel    2022-10-03  132  		rc = PTR_ERR(mii_ts);
5e82147de1cbd7 Oleksij Rempel    2022-10-03  133  		goto clean_pse;
                                                                ^^^^^^^^^^^^^^^

5e82147de1cbd7 Oleksij Rempel    2022-10-03  134  	}
bc1bee3b87ee48 Calvin Johnson    2021-06-11  135  
bc1bee3b87ee48 Calvin Johnson    2021-06-11  136  	rc = fwnode_property_match_string(child, "compatible",
bc1bee3b87ee48 Calvin Johnson    2021-06-11  137  					  "ethernet-phy-ieee802.3-c45");
bc1bee3b87ee48 Calvin Johnson    2021-06-11  138  	if (rc >= 0)
bc1bee3b87ee48 Calvin Johnson    2021-06-11  139  		is_c45 = true;
bc1bee3b87ee48 Calvin Johnson    2021-06-11  140  
3f08f04af6947d Pierluigi Passaro 2023-01-15  141  	reset_gpio = fwnode_gpiod_get_index(child, "reset", 0, GPIOD_OUT_LOW, "PHY reset");
3f08f04af6947d Pierluigi Passaro 2023-01-15  142  	if (reset_gpio == ERR_PTR(-EPROBE_DEFER)) {
3f08f04af6947d Pierluigi Passaro 2023-01-15  143  		dev_dbg(&bus->dev, "reset signal for PHY@%u not ready\n", addr);
3f08f04af6947d Pierluigi Passaro 2023-01-15 @144  		return -EPROBE_DEFER;
                                                                ^^^^^^^^^^^^^^^^^^^^
Looks like there needs to be some clean up done before the return.
(Sometimes the kbuild-bot doesn't include the whole function in these
emails. I'm not sure what the rules are.).

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests