From: David Gibson <david@gibson.dropbear.id.au>
To: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: xiaoguangrong.eric@gmail.com, mst@redhat.com,
aneesh.kumar@linux.ibm.com, Greg Kurz <groug@kaod.org>,
kvm-ppc@vger.kernel.org, qemu-devel@nongnu.org,
shivaprasadbhat@gmail.com, qemu-ppc@nongnu.org,
bharata@linux.vnet.ibm.com, imammedo@redhat.com,
ehabkost@redhat.com
Subject: Re: [PATCH] ppc/spapr: Add support for implement support for H_SCM_HEALTH
Date: Tue, 30 Mar 2021 23:49:07 +0000 [thread overview]
Message-ID: <YGO488mqe2RMHBiu@yekko.fritz.box> (raw)
In-Reply-To: <87r1jwpo3p.fsf@vajain21.in.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 5403 bytes --]
On Tue, Mar 30, 2021 at 10:37:06PM +0530, Vaibhav Jain wrote:
>
> Thanks for looking into this patch Greg. My responses below inline.
>
>
> Greg Kurz <groug@kaod.org> writes:
>
> > Hi Vaibhav,
> >
> > Great to see you around :-)
>
> :-)
>
> >
> > On Mon, 29 Mar 2021 21:52:59 +0530
> > Vaibhav Jain <vaibhav@linux.ibm.com> wrote:
> >
> >> Add support for H_SCM_HEALTH hcall described at [1] for spapr
> >> nvdimms. This enables guest to detect the 'unarmed' status of a
> >> specific spapr nvdimm identified by its DRC and if its unarmed, mark
> >> the region backed by the nvdimm as read-only.
> >>
> >
> > Any chance that you can provide the documentation of this new hcall ?
> >
> H_SCM_HEALTH specifications is already documented in linux kernel
> documentation at
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/powerpc/papr_hcalls.rst
Putting a reference to that in the commit message would be a good idea.
> That documentation was added when kernel support for H_SCM_HEALTH hcall
> support was implemented in 5.9 kernel.
>
> >> The patch adds h_scm_health() to handle the H_SCM_HEALTH hcall which
> >> returns two 64-bit bitmaps (health bitmap, health bitmap mask) derived
> >> from 'struct nvdimm->unarmed' member.
> >>
> >> Linux kernel side changes to enable handling of 'unarmed' nvdimms for
> >> ppc64 are proposed at [2].
> >>
> >> References:
> >> [1] "Hypercall Op-codes (hcalls)"
> >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/powerpc/papr_hcalls.rst
> >>
> >> [2] "powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe"
> >> https://lore.kernel.org/linux-nvdimm/20210329113103.476760-1-vaibhav@linux.ibm.com/
> >>
> >> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
> >> ---
> >> hw/ppc/spapr_nvdimm.c | 30 ++++++++++++++++++++++++++++++
> >> include/hw/ppc/spapr.h | 4 ++--
> >> 2 files changed, 32 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/hw/ppc/spapr_nvdimm.c b/hw/ppc/spapr_nvdimm.c
> >> index b46c36917c..e38740036d 100644
> >> --- a/hw/ppc/spapr_nvdimm.c
> >> +++ b/hw/ppc/spapr_nvdimm.c
> >> @@ -31,6 +31,13 @@
> >> #include "qemu/range.h"
> >> #include "hw/ppc/spapr_numa.h"
> >>
> >> +/* DIMM health bitmap bitmap indicators */
> >> +/* SCM device is unable to persist memory contents */
> >> +#define PAPR_PMEM_UNARMED (1ULL << (63 - 0))
> >
> > This looks like PPC_BIT(0).
> >
> Yes, right. Will update the patch in v2 to use the PPC_BIT macro.
>
> >> +
> >> +/* Bits status indicators for health bitmap indicating unarmed dimm */
> >> +#define PAPR_PMEM_UNARMED_MASK (PAPR_PMEM_UNARMED)
> >> +
> >> bool spapr_nvdimm_validate(HotplugHandler *hotplug_dev, NVDIMMDevice *nvdimm,
> >> uint64_t size, Error **errp)
> >> {
> >> @@ -467,6 +474,28 @@ static target_ulong h_scm_unbind_all(PowerPCCPU *cpu, SpaprMachineState *spapr,
> >> return H_SUCCESS;
> >> }
> >>
> >> +static target_ulong h_scm_health(PowerPCCPU *cpu, SpaprMachineState *spapr,
> >> + target_ulong opcode, target_ulong *args)
> >> +{
> >> + uint32_t drc_index = args[0];
> >> + SpaprDrc *drc = spapr_drc_by_index(drc_index);
> >> + NVDIMMDevice *nvdimm;
> >> +
> >> + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) {
> >> + return H_PARAMETER;
> >> + }
> >> +
> >> + nvdimm = NVDIMM(drc->dev);
> >
> > Yeah as already suggested by Shiva, drc->dev should be checked like
> > in h_scm_bind_mem().
> >
> Yes, will send a v2 with this case handled.
>
> >> +
> >> + /* Check if the nvdimm is unarmed and send its status via health bitmaps */
> >> + args[0] = nvdimm->unarmed ? PAPR_PMEM_UNARMED_MASK : 0;
> >> +
> >
> > Shouldn't ^^ use PAPR_PMEM_UNARMED then ?
> >
> >> + /* health bitmap mask same as the health bitmap */
> >> + args[1] = args[0];
> >> +
> >
> > If so, it seems that PAPR_PMEM_UNARMED_MASK isn't even needed.
>
> Definition of these defines are similar to what kernel implementation
> uses at
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/platforms/pseries/papr_scm.c#n53
>
> Since unarmed condition can also arise due to an unhealthy nvdimm hence
> the kernel implementation uses a mask thats composed of two bits
> PPC_BIT(0) and PPC_BIT(6) being set. Though we arent using PPC_BIT(6)
> right now in qemu, it will change in future when better nvdimm health
> reporting will be done. Hence kept the PPC_BIT(0) define as well as the
> mask to mimic the kernel definitions.
>
> >
> > Having access to the excerpts from the PAPR addendum that describes
> > this hcall would _really_ help in reviewing.
> >
> The kernel documentation for H_SCM_HEALTH mentioned above captures most
> if not all parts of the PAPR addendum for this hcall. I believe it
> contains enough information to review the patch. If you still need more
> info than please let me know.
We've missed the qemu-6.0 cutoff, so this will be 6.1 material. I'll
await v2 for further review.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: David Gibson <david@gibson.dropbear.id.au>
To: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: xiaoguangrong.eric@gmail.com, mst@redhat.com,
aneesh.kumar@linux.ibm.com, Greg Kurz <groug@kaod.org>,
kvm-ppc@vger.kernel.org, qemu-devel@nongnu.org,
shivaprasadbhat@gmail.com, qemu-ppc@nongnu.org,
bharata@linux.vnet.ibm.com, imammedo@redhat.com,
ehabkost@redhat.com
Subject: Re: [PATCH] ppc/spapr: Add support for implement support for H_SCM_HEALTH
Date: Wed, 31 Mar 2021 10:49:07 +1100 [thread overview]
Message-ID: <YGO488mqe2RMHBiu@yekko.fritz.box> (raw)
In-Reply-To: <87r1jwpo3p.fsf@vajain21.in.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 5403 bytes --]
On Tue, Mar 30, 2021 at 10:37:06PM +0530, Vaibhav Jain wrote:
>
> Thanks for looking into this patch Greg. My responses below inline.
>
>
> Greg Kurz <groug@kaod.org> writes:
>
> > Hi Vaibhav,
> >
> > Great to see you around :-)
>
> :-)
>
> >
> > On Mon, 29 Mar 2021 21:52:59 +0530
> > Vaibhav Jain <vaibhav@linux.ibm.com> wrote:
> >
> >> Add support for H_SCM_HEALTH hcall described at [1] for spapr
> >> nvdimms. This enables guest to detect the 'unarmed' status of a
> >> specific spapr nvdimm identified by its DRC and if its unarmed, mark
> >> the region backed by the nvdimm as read-only.
> >>
> >
> > Any chance that you can provide the documentation of this new hcall ?
> >
> H_SCM_HEALTH specifications is already documented in linux kernel
> documentation at
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/powerpc/papr_hcalls.rst
Putting a reference to that in the commit message would be a good idea.
> That documentation was added when kernel support for H_SCM_HEALTH hcall
> support was implemented in 5.9 kernel.
>
> >> The patch adds h_scm_health() to handle the H_SCM_HEALTH hcall which
> >> returns two 64-bit bitmaps (health bitmap, health bitmap mask) derived
> >> from 'struct nvdimm->unarmed' member.
> >>
> >> Linux kernel side changes to enable handling of 'unarmed' nvdimms for
> >> ppc64 are proposed at [2].
> >>
> >> References:
> >> [1] "Hypercall Op-codes (hcalls)"
> >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/powerpc/papr_hcalls.rst
> >>
> >> [2] "powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe"
> >> https://lore.kernel.org/linux-nvdimm/20210329113103.476760-1-vaibhav@linux.ibm.com/
> >>
> >> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
> >> ---
> >> hw/ppc/spapr_nvdimm.c | 30 ++++++++++++++++++++++++++++++
> >> include/hw/ppc/spapr.h | 4 ++--
> >> 2 files changed, 32 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/hw/ppc/spapr_nvdimm.c b/hw/ppc/spapr_nvdimm.c
> >> index b46c36917c..e38740036d 100644
> >> --- a/hw/ppc/spapr_nvdimm.c
> >> +++ b/hw/ppc/spapr_nvdimm.c
> >> @@ -31,6 +31,13 @@
> >> #include "qemu/range.h"
> >> #include "hw/ppc/spapr_numa.h"
> >>
> >> +/* DIMM health bitmap bitmap indicators */
> >> +/* SCM device is unable to persist memory contents */
> >> +#define PAPR_PMEM_UNARMED (1ULL << (63 - 0))
> >
> > This looks like PPC_BIT(0).
> >
> Yes, right. Will update the patch in v2 to use the PPC_BIT macro.
>
> >> +
> >> +/* Bits status indicators for health bitmap indicating unarmed dimm */
> >> +#define PAPR_PMEM_UNARMED_MASK (PAPR_PMEM_UNARMED)
> >> +
> >> bool spapr_nvdimm_validate(HotplugHandler *hotplug_dev, NVDIMMDevice *nvdimm,
> >> uint64_t size, Error **errp)
> >> {
> >> @@ -467,6 +474,28 @@ static target_ulong h_scm_unbind_all(PowerPCCPU *cpu, SpaprMachineState *spapr,
> >> return H_SUCCESS;
> >> }
> >>
> >> +static target_ulong h_scm_health(PowerPCCPU *cpu, SpaprMachineState *spapr,
> >> + target_ulong opcode, target_ulong *args)
> >> +{
> >> + uint32_t drc_index = args[0];
> >> + SpaprDrc *drc = spapr_drc_by_index(drc_index);
> >> + NVDIMMDevice *nvdimm;
> >> +
> >> + if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) {
> >> + return H_PARAMETER;
> >> + }
> >> +
> >> + nvdimm = NVDIMM(drc->dev);
> >
> > Yeah as already suggested by Shiva, drc->dev should be checked like
> > in h_scm_bind_mem().
> >
> Yes, will send a v2 with this case handled.
>
> >> +
> >> + /* Check if the nvdimm is unarmed and send its status via health bitmaps */
> >> + args[0] = nvdimm->unarmed ? PAPR_PMEM_UNARMED_MASK : 0;
> >> +
> >
> > Shouldn't ^^ use PAPR_PMEM_UNARMED then ?
> >
> >> + /* health bitmap mask same as the health bitmap */
> >> + args[1] = args[0];
> >> +
> >
> > If so, it seems that PAPR_PMEM_UNARMED_MASK isn't even needed.
>
> Definition of these defines are similar to what kernel implementation
> uses at
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/powerpc/platforms/pseries/papr_scm.c#n53
>
> Since unarmed condition can also arise due to an unhealthy nvdimm hence
> the kernel implementation uses a mask thats composed of two bits
> PPC_BIT(0) and PPC_BIT(6) being set. Though we arent using PPC_BIT(6)
> right now in qemu, it will change in future when better nvdimm health
> reporting will be done. Hence kept the PPC_BIT(0) define as well as the
> mask to mimic the kernel definitions.
>
> >
> > Having access to the excerpts from the PAPR addendum that describes
> > this hcall would _really_ help in reviewing.
> >
> The kernel documentation for H_SCM_HEALTH mentioned above captures most
> if not all parts of the PAPR addendum for this hcall. I believe it
> contains enough information to review the patch. If you still need more
> info than please let me know.
We've missed the qemu-6.0 cutoff, so this will be 6.1 material. I'll
await v2 for further review.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2021-03-30 23:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-29 16:22 [PATCH] ppc/spapr: Add support for implement support for H_SCM_HEALTH Vaibhav Jain
2021-03-29 16:34 ` Vaibhav Jain
2021-03-30 6:38 ` Shivaprasad G Bhat
2021-03-30 6:50 ` Shivaprasad G Bhat
2021-03-30 8:38 ` Vaibhav Jain
2021-03-30 8:50 ` Vaibhav Jain
2021-03-30 14:14 ` Greg Kurz
2021-03-30 14:14 ` Greg Kurz
2021-03-30 17:07 ` Vaibhav Jain
2021-03-30 17:19 ` Vaibhav Jain
2021-03-30 23:49 ` David Gibson [this message]
2021-03-30 23:49 ` David Gibson
2021-03-31 3:49 ` Vaibhav Jain
2021-03-31 3:50 ` Vaibhav Jain
2021-03-31 9:15 ` Greg Kurz
2021-03-31 9:15 ` Greg Kurz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YGO488mqe2RMHBiu@yekko.fritz.box \
--to=david@gibson.dropbear.id.au \
--cc=aneesh.kumar@linux.ibm.com \
--cc=bharata@linux.vnet.ibm.com \
--cc=ehabkost@redhat.com \
--cc=groug@kaod.org \
--cc=imammedo@redhat.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
--cc=shivaprasadbhat@gmail.com \
--cc=vaibhav@linux.ibm.com \
--cc=xiaoguangrong.eric@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.