[PATCH v2] ARM: dts: dra76-evm: remove ov5640

[PATCH v2] ARM: dts: dra76-evm: remove ov5640

[Tomi Valkeinen]

DRA76 EVM boards are not shipped with OV5640 sensor module, it is a
separate purchase. OV5640 module is also just one of the possible
sensors or capture boards you can connect.

However, for some reason, OV5640 has been added to the board dts file,
making it cumbersome to use other sensors.

Remove the OV5640 from the dts file so that it is easy to use other
sensors via DT overlays.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---

Changes in v2:
- Dropped empty i2c5 and csi2_0 nodes

A DT overlay with OV5640 can be found from:

https://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux-dt.git/commit/?h=multistream/work&id=ac6b5065be54bb32322fcb8d04cda9a0eb10610c

 arch/arm/boot/dts/dra76-evm.dts | 35 ---------------------------------
 1 file changed, 35 deletions(-)

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 9bd01ae40b1d..4508f7ffde0d 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -158,12 +158,6 @@ aic_dvdd: fixedregulator-aic_dvdd {
 		regulator-max-microvolt = <1800000>;
 	};
 
-	clk_ov5640_fixed: clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-
 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -406,27 +400,6 @@ tlv320aic3106: tlv320aic3106@19 {
 	};
 };
 
-&i2c5 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	ov5640@3c {
-		compatible = "ovti,ov5640";
-		reg = <0x3c>;
-
-		clocks = <&clk_ov5640_fixed>;
-		clock-names = "xclk";
-
-		port {
-			csi2_cam0: endpoint {
-				remote-endpoint = <&csi2_phy0>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-};
-
 &cpu0 {
 	vdd-supply = <&buck10_reg>;
 };
@@ -573,14 +546,6 @@ can-transceiver {
 	};
 };
 
-&csi2_0 {
-	csi2_phy0: endpoint {
-		remote-endpoint = <&csi2_cam0>;
-		clock-lanes = <0>;
-		data-lanes = <1 2>;
-	};
-};
-
 &ipu2 {
 	status = "okay";
 	memory-region = <&ipu2_cma_pool>;
-- 
2.25.1

Re: [PATCH v2] ARM: dts: dra76-evm: remove ov5640

[Tony Lindgren]

* Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> [210423 11:38]:
> DRA76 EVM boards are not shipped with OV5640 sensor module, it is a
> separate purchase. OV5640 module is also just one of the possible
> sensors or capture boards you can connect.
> 
> However, for some reason, OV5640 has been added to the board dts file,
> making it cumbersome to use other sensors.
> 
> Remove the OV5640 from the dts file so that it is easy to use other
> sensors via DT overlays.

Adding into omap-for-v5.14/dt thanks.

Tony