Re: [PATCH 06/11] drm/msm/disp/dpu1: Add DSC support in hw_ctl

[Vinod Koul <vkoul@kernel.org>]

On 30-07-21, 01:15, Dmitry Baryshkov wrote:
> On 15/07/2021 09:51, Vinod Koul wrote:
> > Later gens of hardware have DSC bits moved to hw_ctl, so configure these
> > bits so that DSC would work there as well
> > 
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > ---
> >   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 7 ++++++-
> >   1 file changed, 6 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > index 2d4645e01ebf..aeea6add61ee 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > @@ -25,6 +25,8 @@
> >   #define   CTL_MERGE_3D_ACTIVE           0x0E4
> >   #define   CTL_INTF_ACTIVE               0x0F4
> >   #define   CTL_MERGE_3D_FLUSH            0x100
> > +#define   CTL_DSC_ACTIVE                0x0E8
> > +#define   CTL_DSC_FLUSH                0x104
> >   #define   CTL_INTF_FLUSH                0x110
> >   #define   CTL_INTF_MASTER               0x134
> >   #define   CTL_FETCH_PIPE_ACTIVE         0x0FC
> > @@ -34,6 +36,7 @@
> >   #define DPU_REG_RESET_TIMEOUT_US        2000
> >   #define  MERGE_3D_IDX   23
> > +#define  DSC_IDX        22
> >   #define  INTF_IDX       31
> >   #define CTL_INVALID_BIT                 0xffff
> > @@ -120,6 +123,7 @@ static u32 dpu_hw_ctl_get_pending_flush(struct dpu_hw_ctl *ctx)
> >   static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
> >   {
> > +	DPU_REG_WRITE(&ctx->hw, CTL_DSC_FLUSH, BIT(0) | BIT(1) | BIT(2) | BIT(3));
> 
> Please pass DSC indices using intf cfg and use them to configure register
> writes.

Yes I have modified the intf cfg dsc from bool to pass actual indices.
So this patch goes next (as a dependency reorder) and we use this only
when DSC is enabled and use the indices set. Thanks for the suggestion

-- 
~Vinod