* [v3 1/2] ASoC: dt-bindings: max98520: add initial bindings @ 2021-10-18 8:35 ` George Song 0 siblings, 0 replies; 14+ messages in thread From: George Song @ 2021-10-18 8:35 UTC (permalink / raw) To: lgirdwood, broonie, robh+dt Cc: devicetree, alsa-devel, steves.lee, ryans.lee, george.song, linux-kernel, George Song add initial bindings for max98520 audio amplifier Signed-off-by: George Song <george.song@maximintegrated.com> --- .../bindings/sound/maxim,max98520.yaml | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98520.yaml diff --git a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml new file mode 100644 index 000000000000..b6509cb2c8e0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98520.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98520 Speaker Amplifier Driver + +maintainers: + - George Song <george.song@maximintegrated.com> + +properties: + compatible: + const: maxim,max98520 + + reg: + maxItems: 1 + description: I2C address of the device. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98520: amplifier@38 { + compatible = "maxim,max98520"; + reg = <0x38>; + }; + }; + -- 2.25.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [v3 1/2] ASoC: dt-bindings: max98520: add initial bindings @ 2021-10-18 8:35 ` George Song 0 siblings, 0 replies; 14+ messages in thread From: George Song @ 2021-10-18 8:35 UTC (permalink / raw) To: lgirdwood, broonie, robh+dt Cc: alsa-devel, devicetree, linux-kernel, george.song, ryans.lee, steves.lee, George Song add initial bindings for max98520 audio amplifier Signed-off-by: George Song <george.song@maximintegrated.com> --- .../bindings/sound/maxim,max98520.yaml | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98520.yaml diff --git a/Documentation/devicetree/bindings/sound/maxim,max98520.yaml b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml new file mode 100644 index 000000000000..b6509cb2c8e0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/maxim,max98520.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/maxim,max98520.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX98520 Speaker Amplifier Driver + +maintainers: + - George Song <george.song@maximintegrated.com> + +properties: + compatible: + const: maxim,max98520 + + reg: + maxItems: 1 + description: I2C address of the device. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + max98520: amplifier@38 { + compatible = "maxim,max98520"; + reg = <0x38>; + }; + }; + -- 2.25.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver 2021-10-18 8:35 ` George Song @ 2021-10-18 8:35 ` George Song -1 siblings, 0 replies; 14+ messages in thread From: George Song @ 2021-10-18 8:35 UTC (permalink / raw) To: lgirdwood, broonie, robh+dt Cc: devicetree, alsa-devel, steves.lee, ryans.lee, george.song, linux-kernel, George Song add max98520 audio amplifier driver Signed-off-by: George Song <george.song@maximintegrated.com> --- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98520.c | 770 ++++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98520.h | 159 ++++++++ 4 files changed, 943 insertions(+) create mode 100644 sound/soc/codecs/max98520.c create mode 100644 sound/soc/codecs/max98520.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 82ee233a269d..e8817029c671 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -115,6 +115,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MAX98357A imply SND_SOC_MAX98371 imply SND_SOC_MAX98504 + imply SND_SOC_MAX98520 imply SND_SOC_MAX9867 imply SND_SOC_MAX98925 imply SND_SOC_MAX98926 @@ -922,6 +923,17 @@ config SND_SOC_MAX98927 tristate "Maxim Integrated MAX98927 Speaker Amplifier" depends on I2C +config SND_SOC_MAX98520 + tristate "Maxim Integrated MAX98520 Speaker Amplifier" + depends on I2C + help + Enable support for Maxim Integrated MAX98520 audio + amplifier, which implements a tripler charge pump + based boost converter and support sample rates of + 8KHz to 192KHz. + + To compile this driver as a module, choose M here. + config SND_SOC_MAX98373 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 8dcea2c4604a..daf63e31fdd0 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -123,6 +123,7 @@ snd-soc-max9867-objs := max9867.o snd-soc-max98925-objs := max98925.o snd-soc-max98926-objs := max98926.o snd-soc-max98927-objs := max98927.o +snd-soc-max98520-objs := max98520.o snd-soc-max98373-objs := max98373.o snd-soc-max98373-i2c-objs := max98373-i2c.o snd-soc-max98373-sdw-objs := max98373-sdw.o @@ -450,6 +451,7 @@ obj-$(CONFIG_SND_SOC_MAX9867) += snd-soc-max9867.o obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o +obj-$(CONFIG_SND_SOC_MAX98520) += snd-soc-max98520.o obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o obj-$(CONFIG_SND_SOC_MAX98373_I2C) += snd-soc-max98373-i2c.o obj-$(CONFIG_SND_SOC_MAX98373_SDW) += snd-soc-max98373-sdw.o diff --git a/sound/soc/codecs/max98520.c b/sound/soc/codecs/max98520.c new file mode 100644 index 000000000000..163cc0f106af --- /dev/null +++ b/sound/soc/codecs/max98520.c @@ -0,0 +1,770 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2021, Maxim Integrated + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/cdev.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <sound/tlv.h> +#include "max98520.h" + +static struct reg_default max98520_reg[] = { + {MAX98520_R2000_SW_RESET, 0x00}, + {MAX98520_R2001_STATUS_1, 0x00}, + {MAX98520_R2002_STATUS_2, 0x00}, + {MAX98520_R2020_THERM_WARN_THRESH, 0x46}, + {MAX98520_R2021_THERM_SHDN_THRESH, 0x64}, + {MAX98520_R2022_THERM_HYSTERESIS, 0x02}, + {MAX98520_R2023_THERM_FOLDBACK_SET, 0x31}, + {MAX98520_R2027_THERM_FOLDBACK_EN, 0x01}, + {MAX98520_R2030_CLK_MON_CTRL, 0x00}, + {MAX98520_R2037_ERR_MON_CTRL, 0x01}, + {MAX98520_R2040_PCM_MODE_CFG, 0xC0}, + {MAX98520_R2041_PCM_CLK_SETUP, 0x04}, + {MAX98520_R2042_PCM_SR_SETUP, 0x08}, + {MAX98520_R2043_PCM_RX_SRC1, 0x00}, + {MAX98520_R2044_PCM_RX_SRC2, 0x00}, + {MAX98520_R204F_PCM_RX_EN, 0x00}, + {MAX98520_R2090_AMP_VOL_CTRL, 0x00}, + {MAX98520_R2091_AMP_PATH_GAIN, 0x03}, + {MAX98520_R2092_AMP_DSP_CFG, 0x02}, + {MAX98520_R2094_SSM_CFG, 0x01}, + {MAX98520_R2095_AMP_CFG, 0xF0}, + {MAX98520_R209F_AMP_EN, 0x00}, + {MAX98520_R20B0_ADC_SR, 0x00}, + {MAX98520_R20B1_ADC_RESOLUTION, 0x00}, + {MAX98520_R20B2_ADC_PVDD0_CFG, 0x02}, + {MAX98520_R20B3_ADC_THERMAL_CFG, 0x02}, + {MAX98520_R20B4_ADC_READBACK_CTRL, 0x00}, + {MAX98520_R20B5_ADC_READBACK_UPDATE, 0x00}, + {MAX98520_R20B6_ADC_PVDD_READBACK_MSB, 0x00}, + {MAX98520_R20B7_ADC_PVDD_READBACK_LSB, 0x00}, + {MAX98520_R20B8_ADC_TEMP_READBACK_MSB, 0x00}, + {MAX98520_R20B9_ADC_TEMP_READBACK_LSB, 0x00}, + {MAX98520_R20BA_ADC_LOW_PVDD_READBACK_MSB, 0xFF}, + {MAX98520_R20BB_ADC_LOW_READBACK_LSB, 0x01}, + {MAX98520_R20BC_ADC_HIGH_TEMP_READBACK_MSB, 0x00}, + {MAX98520_R20BD_ADC_HIGH_TEMP_READBACK_LSB, 0x00}, + {MAX98520_R20CF_MEAS_ADC_CFG, 0x00}, + {MAX98520_R20D0_DHT_CFG1, 0x00}, + {MAX98520_R20D1_LIMITER_CFG1, 0x08}, + {MAX98520_R20D2_LIMITER_CFG2, 0x00}, + {MAX98520_R20D3_DHT_CFG2, 0x14}, + {MAX98520_R20D4_DHT_CFG3, 0x02}, + {MAX98520_R20D5_DHT_CFG4, 0x04}, + {MAX98520_R20D6_DHT_HYSTERESIS_CFG, 0x07}, + {MAX98520_R20D8_DHT_EN, 0x00}, + {MAX98520_R210E_AUTO_RESTART_BEHAVIOR, 0x00}, + {MAX98520_R210F_GLOBAL_EN, 0x00}, + {MAX98520_R21FF_REVISION_ID, 0x00}, +}; + +static int max98520_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + unsigned int format = 0; + unsigned int invert = 0; + + dev_dbg(component->dev, "%s: fmt 0x%08X\n", __func__, fmt); + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + invert = MAX98520_PCM_MODE_CFG_PCM_BCLKEDGE; + break; + default: + dev_err(component->dev, "DAI invert mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98520->regmap, + MAX98520_R2041_PCM_CLK_SETUP, + MAX98520_PCM_MODE_CFG_PCM_BCLKEDGE, + invert); + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format = MAX98520_PCM_FORMAT_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + format = MAX98520_PCM_FORMAT_LJ; + break; + case SND_SOC_DAIFMT_DSP_A: + format = MAX98520_PCM_FORMAT_TDM_MODE1; + break; + case SND_SOC_DAIFMT_DSP_B: + format = MAX98520_PCM_FORMAT_TDM_MODE0; + break; + default: + return -EINVAL; + } + + regmap_update_bits(max98520->regmap, + MAX98520_R2040_PCM_MODE_CFG, + MAX98520_PCM_MODE_CFG_FORMAT_MASK, + format << MAX98520_PCM_MODE_CFG_FORMAT_SHIFT); + + return 0; +} + +/* BCLKs per LRCLK */ +static const int bclk_sel_table[] = { + 32, 48, 64, 96, 128, 192, 256, 384, 512, 320, +}; + +static int max98520_get_bclk_sel(int bclk) +{ + int i; + /* match BCLKs per LRCLK */ + for (i = 0; i < ARRAY_SIZE(bclk_sel_table); i++) { + if (bclk_sel_table[i] == bclk) + return i + 2; + } + return 0; +} + +static int max98520_set_clock(struct snd_soc_component *component, + struct snd_pcm_hw_params *params) +{ + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + /* BCLK/LRCLK ratio calculation */ + int blr_clk_ratio = params_channels(params) * max98520->ch_size; + int value; + + if (!max98520->tdm_mode) { + /* BCLK configuration */ + value = max98520_get_bclk_sel(blr_clk_ratio); + if (!value) { + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + return -EINVAL; + } + + regmap_update_bits(max98520->regmap, + MAX98520_R2041_PCM_CLK_SETUP, + MAX98520_PCM_CLK_SETUP_BSEL_MASK, + value); + } + dev_dbg(component->dev, "%s tdm_mode:%d out\n", __func__, max98520->tdm_mode); + return 0; +} + +static int max98520_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + unsigned int sampling_rate = 0; + unsigned int chan_sz = 0; + + /* pcm mode configuration */ + switch (snd_pcm_format_width(params_format(params))) { + case 16: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + goto err; + } + + max98520->ch_size = snd_pcm_format_width(params_format(params)); + + regmap_update_bits(max98520->regmap, + MAX98520_R2040_PCM_MODE_CFG, + MAX98520_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + dev_dbg(component->dev, "format supported %d", + params_format(params)); + + /* sampling rate configuration */ + switch (params_rate(params)) { + case 8000: + sampling_rate = MAX98520_PCM_SR_8000; + break; + case 11025: + sampling_rate = MAX98520_PCM_SR_11025; + break; + case 12000: + sampling_rate = MAX98520_PCM_SR_12000; + break; + case 16000: + sampling_rate = MAX98520_PCM_SR_16000; + break; + case 22050: + sampling_rate = MAX98520_PCM_SR_22050; + break; + case 24000: + sampling_rate = MAX98520_PCM_SR_24000; + break; + case 32000: + sampling_rate = MAX98520_PCM_SR_32000; + break; + case 44100: + sampling_rate = MAX98520_PCM_SR_44100; + break; + case 48000: + sampling_rate = MAX98520_PCM_SR_48000; + break; + case 88200: + sampling_rate = MAX98520_PCM_SR_88200; + break; + case 96000: + sampling_rate = MAX98520_PCM_SR_96000; + break; + case 176400: + sampling_rate = MAX98520_PCM_SR_176400; + break; + case 192000: + sampling_rate = MAX98520_PCM_SR_192000; + break; + default: + dev_err(component->dev, "rate %d not supported\n", + params_rate(params)); + goto err; + } + + dev_dbg(component->dev, " %s ch_size: %d, sampling rate : %d out\n", __func__, + snd_pcm_format_width(params_format(params)), params_rate(params)); + /* set DAI_SR to correct LRCLK frequency */ + regmap_update_bits(max98520->regmap, + MAX98520_R2042_PCM_SR_SETUP, + MAX98520_PCM_SR_MASK, + sampling_rate); + + return max98520_set_clock(component, params); +err: + dev_dbg(component->dev, "%s out error", __func__); + return -EINVAL; +} + +static int max98520_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + int bsel = 0; + unsigned int chan_sz = 0; + + if (!tx_mask && !rx_mask && !slots && !slot_width) + max98520->tdm_mode = false; + else + max98520->tdm_mode = true; + + /* BCLK configuration */ + bsel = max98520_get_bclk_sel(slots * slot_width); + if (bsel == 0) { + dev_err(component->dev, "BCLK %d not supported\n", + slots * slot_width); + return -EINVAL; + } + + regmap_update_bits(max98520->regmap, + MAX98520_R2041_PCM_CLK_SETUP, + MAX98520_PCM_CLK_SETUP_BSEL_MASK, + bsel); + + /* Channel size configuration */ + switch (slot_width) { + case 16: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + slot_width); + return -EINVAL; + } + + regmap_update_bits(max98520->regmap, + MAX98520_R2040_PCM_MODE_CFG, + MAX98520_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + /* Rx slot configuration */ + regmap_update_bits(max98520->regmap, + MAX98520_R2044_PCM_RX_SRC2, + MAX98520_PCM_DMIX_CH0_SRC_MASK, + rx_mask); + regmap_update_bits(max98520->regmap, + MAX98520_R2044_PCM_RX_SRC2, + MAX98520_PCM_DMIX_CH1_SRC_MASK, + rx_mask << MAX98520_PCM_DMIX_CH1_SHIFT); + + return 0; +} + +#define MAX98520_RATES SNDRV_PCM_RATE_8000_192000 + +#define MAX98520_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static const struct snd_soc_dai_ops max98520_dai_ops = { + .set_fmt = max98520_dai_set_fmt, + .hw_params = max98520_dai_hw_params, + .set_tdm_slot = max98520_dai_tdm_slot, +}; + +static int max98520_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + dev_dbg(component->dev, " AMP ON\n"); + + regmap_write(max98520->regmap, MAX98520_R210F_GLOBAL_EN, 1); + usleep_range(30000, 31000); + break; + case SND_SOC_DAPM_POST_PMD: + dev_dbg(component->dev, " AMP OFF\n"); + + regmap_write(max98520->regmap, MAX98520_R210F_GLOBAL_EN, 0); + usleep_range(30000, 31000); + max98520->tdm_mode = false; + break; + default: + return 0; + } + return 0; +} + +static const char * const max98520_switch_text[] = { + "Left", "Right", "LeftRight"}; + +static const struct soc_enum dai_sel_enum = + SOC_ENUM_SINGLE(MAX98520_R2043_PCM_RX_SRC1, + 0, 3, max98520_switch_text); + +static const struct snd_kcontrol_new max98520_dai_controls = + SOC_DAPM_ENUM("DAI Sel", dai_sel_enum); + +static const struct snd_soc_dapm_widget max98520_dapm_widgets[] = { + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", + MAX98520_R209F_AMP_EN, 0, 0, max98520_dac_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0, &max98520_dai_controls), + SND_SOC_DAPM_OUTPUT("BE_OUT"), +}; + +static DECLARE_TLV_DB_SCALE(max98520_digital_tlv, -6300, 50, 1); +static const DECLARE_TLV_DB_RANGE(max98520_spk_tlv, + 0, 5, TLV_DB_SCALE_ITEM(600, 300, 0), +); + +static const DECLARE_TLV_DB_RANGE(max98520_dht_lim_thresh_tlv, + 0, 15, TLV_DB_SCALE_ITEM(-1500, 100, 0), +); + +static const DECLARE_TLV_DB_RANGE(max98520_dht_hysteresis_tlv, + 0, 3, TLV_DB_SCALE_ITEM(100, 100, 0), + 4, 7, TLV_DB_SCALE_ITEM(600, 200, 0), +); + +static const DECLARE_TLV_DB_RANGE(max98520_dht_rotation_point_tlv, + 0, 1, TLV_DB_SCALE_ITEM(-1500, 300, 0), + 2, 4, TLV_DB_SCALE_ITEM(-1000, 200, 0), + 5, 10, TLV_DB_SCALE_ITEM(-500, 100, 0), +); + +static const DECLARE_TLV_DB_RANGE(max98520_dht_supply_hr_tlv, + 0, 16, TLV_DB_SCALE_ITEM(-2000, 250, 0), +); + +static const DECLARE_TLV_DB_RANGE(max98520_dht_max_atten_tlv, + 1, 20, TLV_DB_SCALE_ITEM(-2000, 100, 0), +); + +static const char * const max98520_dht_attack_rate_text[] = { + "20us", "40us", "80us", "160us", "320us", "640us", + "1.28ms", "2.56ms", "5.12ms", "10.24ms", "20.48ms", "40.96ms", + "81.92ms", "163.84ms" +}; + +static SOC_ENUM_SINGLE_DECL(max98520_dht_attack_rate_enum, + MAX98520_R20D4_DHT_CFG3, 0, + max98520_dht_attack_rate_text); + +static const char * const max98520_dht_release_rate_text[] = { + "2ms", "4ms", "8ms", "16ms", "32ms", "64ms", "128ms", "256ms", "512ms", + "1.024s", "2.048s", "4.096s", "8.192s", "16.384s" +}; + +static SOC_ENUM_SINGLE_DECL(max98520_dht_release_rate_enum, + MAX98520_R20D5_DHT_CFG4, 0, + max98520_dht_release_rate_text); + +static bool max98520_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98520_R2000_SW_RESET: + case MAX98520_R2027_THERM_FOLDBACK_EN: + case MAX98520_R2030_CLK_MON_CTRL: + case MAX98520_R2037_ERR_MON_CTRL: + case MAX98520_R204F_PCM_RX_EN: + case MAX98520_R209F_AMP_EN: + case MAX98520_R20CF_MEAS_ADC_CFG: + case MAX98520_R20D8_DHT_EN: + case MAX98520_R21FF_REVISION_ID: + case MAX98520_R2001_STATUS_1... MAX98520_R2002_STATUS_2: + case MAX98520_R2020_THERM_WARN_THRESH... MAX98520_R2023_THERM_FOLDBACK_SET: + case MAX98520_R2040_PCM_MODE_CFG... MAX98520_R2044_PCM_RX_SRC2: + case MAX98520_R2090_AMP_VOL_CTRL... MAX98520_R2092_AMP_DSP_CFG: + case MAX98520_R2094_SSM_CFG... MAX98520_R2095_AMP_CFG: + case MAX98520_R20B0_ADC_SR... MAX98520_R20BD_ADC_HIGH_TEMP_READBACK_LSB: + case MAX98520_R20D0_DHT_CFG1... MAX98520_R20D6_DHT_HYSTERESIS_CFG: + case MAX98520_R210E_AUTO_RESTART_BEHAVIOR... MAX98520_R210F_GLOBAL_EN: + case MAX98520_R2161_BOOST_TM1... MAX98520_R2163_BOOST_TM3: + return true; + default: + return false; + } +}; + +static bool max98520_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98520_R210F_GLOBAL_EN: + case MAX98520_R21FF_REVISION_ID: + case MAX98520_R2000_SW_RESET: + case MAX98520_R2001_STATUS_1 ... MAX98520_R2002_STATUS_2: + case MAX98520_R20B4_ADC_READBACK_CTRL + ... MAX98520_R20BD_ADC_HIGH_TEMP_READBACK_LSB: + return true; + default: + return false; + } +} + +static const struct snd_kcontrol_new max98520_snd_controls[] = { +/* Volume */ +SOC_SINGLE_TLV("Digital Volume", MAX98520_R2090_AMP_VOL_CTRL, + 0, 0x7F, 1, max98520_digital_tlv), +SOC_SINGLE_TLV("Speaker Volume", MAX98520_R2091_AMP_PATH_GAIN, + 0, 0x5, 0, max98520_spk_tlv), +/* Volume Ramp Up/Down Enable*/ +SOC_SINGLE("Ramp Up Switch", MAX98520_R2092_AMP_DSP_CFG, + MAX98520_DSP_SPK_VOL_RMPUP_SHIFT, 1, 0), +SOC_SINGLE("Ramp Down Switch", MAX98520_R2092_AMP_DSP_CFG, + MAX98520_DSP_SPK_VOL_RMPDN_SHIFT, 1, 0), +/* Clock Monitor Enable */ +SOC_SINGLE("CLK Monitor Switch", MAX98520_R2037_ERR_MON_CTRL, + MAX98520_CTRL_CMON_EN_SHIFT, 1, 0), +/* Clock Monitor Config */ +SOC_SINGLE("CLKMON Autorestart Switch", MAX98520_R2030_CLK_MON_CTRL, + MAX98520_CMON_AUTORESTART_SHIFT, 1, 0), +/* Dither Enable */ +SOC_SINGLE("Dither Switch", MAX98520_R2092_AMP_DSP_CFG, + MAX98520_DSP_SPK_DITH_EN_SHIFT, 1, 0), +/* DC Blocker Enable */ +SOC_SINGLE("DC Blocker Switch", MAX98520_R2092_AMP_DSP_CFG, + MAX98520_DSP_SPK_DCBLK_EN_SHIFT, 1, 0), +/* Speaker Safe Mode Enable */ +SOC_SINGLE("Speaker Safemode Switch", MAX98520_R2092_AMP_DSP_CFG, + MAX98520_DSP_SPK_SAFE_EN_SHIFT, 1, 0), +/* AMP SSM Enable */ +SOC_SINGLE("CP Bypass Switch", MAX98520_R2094_SSM_CFG, + MAX98520_SSM_RCVR_MODE_SHIFT, 1, 0), +/* AMP Dynamic Mode Configuration */ +SOC_SINGLE("Dynamic Mode Switch", MAX98520_R2095_AMP_CFG, + MAX98520_CFG_DYN_MODE_SHIFT, 1, 1), +/* AMP Speaker Mode Switch */ +SOC_SINGLE("Speaker Mode Switch", MAX98520_R2095_AMP_CFG, + MAX98520_CFG_SPK_MODE_SHIFT, 1, 0), +/* Dynamic Headroom Tracking */ +SOC_SINGLE("DHT Switch", MAX98520_R20D8_DHT_EN, 0, 1, 0), +SOC_SINGLE("DHT Limiter Mode", MAX98520_R20D2_LIMITER_CFG2, + MAX98520_DHT_LIMITER_MODE_SHIFT, 1, 0), +SOC_SINGLE("DHT Hysteresis Switch", MAX98520_R20D6_DHT_HYSTERESIS_CFG, + MAX98520_DHT_HYSTERESIS_SWITCH_SHIFT, 1, 0), +SOC_SINGLE_TLV("DHT Rot Pnt", MAX98520_R20D0_DHT_CFG1, + MAX98520_DHT_VROT_PNT_SHIFT, 10, 1, max98520_dht_rotation_point_tlv), +SOC_SINGLE_TLV("DHT Supply Headroom", MAX98520_R20D1_LIMITER_CFG1, + MAX98520_DHT_SUPPLY_HR_SHIFT, 16, 0, max98520_dht_supply_hr_tlv), +SOC_SINGLE_TLV("DHT Limiter Threshold", MAX98520_R20D2_LIMITER_CFG2, + MAX98520_DHT_LIMITER_THRESHOLD_SHIFT, 0xF, 1, max98520_dht_lim_thresh_tlv), +SOC_SINGLE_TLV("DHT Max Attenuation", MAX98520_R20D3_DHT_CFG2, + MAX98520_DHT_MAX_ATTEN_SHIFT, 20, 1, max98520_dht_max_atten_tlv), +SOC_SINGLE_TLV("DHT Hysteresis", MAX98520_R20D6_DHT_HYSTERESIS_CFG, + MAX98520_DHT_HYSTERESIS_SHIFT, 0x7, 0, max98520_dht_hysteresis_tlv), +SOC_ENUM("DHT Attack Rate", max98520_dht_attack_rate_enum), +SOC_ENUM("DHT Release Rate", max98520_dht_release_rate_enum), +/* ADC configuration */ +SOC_SINGLE("ADC PVDD CH Switch", MAX98520_R20CF_MEAS_ADC_CFG, 0, 1, 0), +SOC_SINGLE("ADC PVDD FLT Switch", MAX98520_R20B2_ADC_PVDD0_CFG, MAX98520_FLT_EN_SHIFT, 1, 0), +SOC_SINGLE("ADC TEMP FLT Switch", MAX98520_R20B3_ADC_THERMAL_CFG, MAX98520_FLT_EN_SHIFT, 1, 0), +SOC_SINGLE("ADC PVDD MSB", MAX98520_R20B6_ADC_PVDD_READBACK_MSB, 0, 0xFF, 0), +SOC_SINGLE("ADC PVDD LSB", MAX98520_R20B7_ADC_PVDD_READBACK_LSB, 0, 0x01, 0), +SOC_SINGLE("ADC TEMP MSB", MAX98520_R20B8_ADC_TEMP_READBACK_MSB, 0, 0xFF, 0), +SOC_SINGLE("ADC TEMP LSB", MAX98520_R20B9_ADC_TEMP_READBACK_LSB, 0, 0x01, 0), +}; + +static const struct snd_soc_dapm_route max98520_audio_map[] = { + /* Plabyack */ + {"DAI Sel Mux", "Left", "Amp Enable"}, + {"DAI Sel Mux", "Right", "Amp Enable"}, + {"DAI Sel Mux", "LeftRight", "Amp Enable"}, + {"BE_OUT", NULL, "DAI Sel Mux"}, +}; + +static struct snd_soc_dai_driver max98520_dai[] = { + { + .name = "max98520-aif1", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98520_RATES, + .formats = MAX98520_FORMATS, + }, + .ops = &max98520_dai_ops, + } + +}; + +static void max98520_reset(struct max98520_priv *max98520, struct device *dev) +{ + int ret, reg, count; + + /* Software Reset */ + ret = regmap_write(max98520->regmap, MAX98520_R2000_SW_RESET, 1); + if (ret) + dev_err(dev, "Reset command failed. (ret:%d)\n", ret); + + count = 0; + while (count < 3) { + usleep_range(10000, 11000); + /* Software Reset Verification */ + ret = regmap_read(max98520->regmap, MAX98520_R21FF_REVISION_ID, ®); + if (!ret) { + dev_info(dev, "Reset completed (retry:%d)\n", count); + return; + } + count++; + } + dev_err(dev, "Reset failed. (ret:%d)\n", ret); +} + +static int max98520_probe(struct snd_soc_component *component) +{ + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + + /* Software Reset */ + max98520_reset(max98520, component->dev); + usleep_range(30000, 31000); + + /* L/R mix configuration */ + regmap_write(max98520->regmap, MAX98520_R2043_PCM_RX_SRC1, 0x2); + + regmap_write(max98520->regmap, MAX98520_R2044_PCM_RX_SRC2, 0x10); + /* Enable DC blocker */ + regmap_update_bits(max98520->regmap, MAX98520_R2092_AMP_DSP_CFG, 1, 1); + /* Disable Speaker Safe Mode */ + regmap_update_bits(max98520->regmap, + MAX98520_R2092_AMP_DSP_CFG, MAX98520_SPK_SAFE_EN_MASK, 0); + /* Enable Clock Monitor Auto-restart */ + regmap_write(max98520->regmap, MAX98520_R2030_CLK_MON_CTRL, 0x1); + + /* Hard coded values for the experiments */ + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x54); + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x4d); + regmap_write(max98520->regmap, MAX98520_R2161_BOOST_TM1, 0x2); + regmap_write(max98520->regmap, MAX98520_R2095_AMP_CFG, 0xc8); + + /* set Rx Enable */ + regmap_update_bits(max98520->regmap, + MAX98520_R204F_PCM_RX_EN, + MAX98520_PCM_RX_EN_MASK, + 1); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max98520_suspend(struct device *dev) +{ + struct max98520_priv *max98520 = dev_get_drvdata(dev); + + regcache_cache_only(max98520->regmap, true); + regcache_mark_dirty(max98520->regmap); + return 0; +} + +static int max98520_resume(struct device *dev) +{ + struct max98520_priv *max98520 = dev_get_drvdata(dev); + + regcache_cache_only(max98520->regmap, false); + max98520_reset(max98520, dev); + regcache_sync(max98520->regmap); + return 0; +} +#endif + +static const struct dev_pm_ops max98520_pm = { + SET_SYSTEM_SLEEP_PM_OPS(max98520_suspend, max98520_resume) +}; + +static const struct snd_soc_component_driver soc_codec_dev_max98520 = { + .probe = max98520_probe, + .controls = max98520_snd_controls, + .num_controls = ARRAY_SIZE(max98520_snd_controls), + .dapm_widgets = max98520_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(max98520_dapm_widgets), + .dapm_routes = max98520_audio_map, + .num_dapm_routes = ARRAY_SIZE(max98520_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config max98520_regmap = { + .reg_bits = 16, + .val_bits = 8, + .max_register = MAX98520_R21FF_REVISION_ID, + .reg_defaults = max98520_reg, + .num_reg_defaults = ARRAY_SIZE(max98520_reg), + .readable_reg = max98520_readable_register, + .volatile_reg = max98520_volatile_reg, + .cache_type = REGCACHE_RBTREE, +}; + +static int max98520_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + int ret = 0; + int reg = 0; + struct max98520_priv *max98520 = NULL; + struct i2c_adapter *adapter = to_i2c_adapter(i2c->dev.parent); + + ret = i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) { + dev_err(&i2c->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + max98520 = devm_kzalloc(&i2c->dev, sizeof(*max98520), GFP_KERNEL); + + if (!max98520) { + ret = -ENOMEM; + return ret; + } + i2c_set_clientdata(i2c, max98520); + + /* regmap initialization */ + max98520->regmap = + devm_regmap_init_i2c(i2c, &max98520_regmap); + if (IS_ERR(max98520->regmap)) { + ret = PTR_ERR(max98520->regmap); + dev_err(&i2c->dev, + "Failed to allocate regmap: %d\n", ret); + return ret; + } + + /* Power on device */ + if (gpio_is_valid(max98520->reset_gpio)) { + ret = devm_gpio_request(&i2c->dev, max98520->reset_gpio, + "MAX98520_RESET"); + if (ret) { + dev_err(&i2c->dev, "%s: Failed to request gpio %d\n", + __func__, max98520->reset_gpio); + return -EINVAL; + } + gpio_direction_output(max98520->reset_gpio, 0); + msleep(50); + gpio_direction_output(max98520->reset_gpio, 1); + msleep(20); + } + + /* Check Revision ID */ + ret = regmap_read(max98520->regmap, MAX98520_R21FF_REVISION_ID, ®); + if (ret < 0) { + dev_err(&i2c->dev, + "Failed to read: 0x%02X\n", MAX98520_R21FF_REVISION_ID); + return ret; + } + dev_info(&i2c->dev, "MAX98520 revisionID: 0x%02X\n", reg); + + /* codec registration */ + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_codec_dev_max98520, + max98520_dai, ARRAY_SIZE(max98520_dai)); + if (ret < 0) + dev_err(&i2c->dev, "Failed to register codec: %d\n", ret); + + return ret; +} + +static const struct i2c_device_id max98520_i2c_id[] = { + { "max98520", 0}, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, max98520_i2c_id); + +#if defined(CONFIG_OF) +static const struct of_device_id max98520_of_match[] = { + { .compatible = "maxim,max98520", }, + { } +}; +MODULE_DEVICE_TABLE(of, max98520_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max98520_acpi_match[] = { + { "MX98520", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, max98520_acpi_match); +#endif + +static struct i2c_driver max98520_i2c_driver = { + .driver = { + .name = "max98520", + .of_match_table = of_match_ptr(max98520_of_match), + .acpi_match_table = ACPI_PTR(max98520_acpi_match), + .pm = &max98520_pm, + }, + .probe = max98520_i2c_probe, + .id_table = max98520_i2c_id, +}; + +module_i2c_driver(max98520_i2c_driver) + +MODULE_DESCRIPTION("ALSA SoC MAX98520 driver"); +MODULE_AUTHOR("George Song <george.song@maximintegrated.com>"); +MODULE_LICENSE("GPL"); + diff --git a/sound/soc/codecs/max98520.h b/sound/soc/codecs/max98520.h new file mode 100644 index 000000000000..afb5f3917136 --- /dev/null +++ b/sound/soc/codecs/max98520.h @@ -0,0 +1,159 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2021, Maxim Integrated. + */ + +#ifndef _MAX98520_H +#define _MAX98520_H + +#define MAX98520_R2000_SW_RESET 0x2000 +#define MAX98520_R2001_STATUS_1 0x2001 +#define MAX98520_R2002_STATUS_2 0x2002 +#define MAX98520_R2020_THERM_WARN_THRESH 0x2020 +#define MAX98520_R2021_THERM_SHDN_THRESH 0x2021 +#define MAX98520_R2022_THERM_HYSTERESIS 0x2022 +#define MAX98520_R2023_THERM_FOLDBACK_SET 0x2023 +#define MAX98520_R2027_THERM_FOLDBACK_EN 0x2027 +#define MAX98520_R2030_CLK_MON_CTRL 0x2030 +#define MAX98520_R2037_ERR_MON_CTRL 0x2037 +#define MAX98520_R2040_PCM_MODE_CFG 0x2040 +#define MAX98520_R2041_PCM_CLK_SETUP 0x2041 +#define MAX98520_R2042_PCM_SR_SETUP 0x2042 +#define MAX98520_R2043_PCM_RX_SRC1 0x2043 +#define MAX98520_R2044_PCM_RX_SRC2 0x2044 +#define MAX98520_R204F_PCM_RX_EN 0x204F +#define MAX98520_R2090_AMP_VOL_CTRL 0x2090 +#define MAX98520_R2091_AMP_PATH_GAIN 0x2091 +#define MAX98520_R2092_AMP_DSP_CFG 0x2092 +#define MAX98520_R2094_SSM_CFG 0x2094 +#define MAX98520_R2095_AMP_CFG 0x2095 +#define MAX98520_R209F_AMP_EN 0x209F +#define MAX98520_R20B0_ADC_SR 0x20B0 +#define MAX98520_R20B1_ADC_RESOLUTION 0x20B1 +#define MAX98520_R20B2_ADC_PVDD0_CFG 0x20B2 +#define MAX98520_R20B3_ADC_THERMAL_CFG 0x20B3 +#define MAX98520_R20B4_ADC_READBACK_CTRL 0x20B4 +#define MAX98520_R20B5_ADC_READBACK_UPDATE 0x20B5 +#define MAX98520_R20B6_ADC_PVDD_READBACK_MSB 0x20B6 +#define MAX98520_R20B7_ADC_PVDD_READBACK_LSB 0x20B7 +#define MAX98520_R20B8_ADC_TEMP_READBACK_MSB 0x20B8 +#define MAX98520_R20B9_ADC_TEMP_READBACK_LSB 0x20B9 +#define MAX98520_R20BA_ADC_LOW_PVDD_READBACK_MSB 0x20BA +#define MAX98520_R20BB_ADC_LOW_READBACK_LSB 0x20BB +#define MAX98520_R20BC_ADC_HIGH_TEMP_READBACK_MSB 0x20BC +#define MAX98520_R20BD_ADC_HIGH_TEMP_READBACK_LSB 0x20BD +#define MAX98520_R20CF_MEAS_ADC_CFG 0x20CF +#define MAX98520_R20D0_DHT_CFG1 0x20D0 +#define MAX98520_R20D1_LIMITER_CFG1 0x20D1 +#define MAX98520_R20D2_LIMITER_CFG2 0x20D2 +#define MAX98520_R20D3_DHT_CFG2 0x20D3 +#define MAX98520_R20D4_DHT_CFG3 0x20D4 +#define MAX98520_R20D5_DHT_CFG4 0x20D5 +#define MAX98520_R20D6_DHT_HYSTERESIS_CFG 0x20D6 +#define MAX98520_R20D8_DHT_EN 0x20D8 +#define MAX98520_R210E_AUTO_RESTART_BEHAVIOR 0x210E +#define MAX98520_R210F_GLOBAL_EN 0x210F +#define MAX98520_R2161_BOOST_TM1 0x2161 +#define MAX98520_R2162_BOOST_TM2 0x2162 +#define MAX98520_R2163_BOOST_TM3 0x2163 +#define MAX98520_R21FF_REVISION_ID 0x21FF + +/* MAX98520_R2030_CLK_MON_CTRL */ +#define MAX98520_CMON_AUTORESTART_SHIFT (0) + +/* MAX98520_R2037_ERR_MON_CTRL */ +#define MAX98520_CTRL_CMON_EN_SHIFT (0) + +/* MAX98520_R2040_PCM_MODE_CFG */ +#define MAX98520_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3) +#define MAX98520_PCM_MODE_CFG_FORMAT_SHIFT (3) +#define MAX98520_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 2) +#define MAX98520_PCM_FORMAT_I2S (0x0 << 3) +#define MAX98520_PCM_FORMAT_LJ (0x1 << 3) +#define MAX98520_PCM_FORMAT_TDM_MODE0 (0x3 << 3) +#define MAX98520_PCM_FORMAT_TDM_MODE1 (0x4 << 3) +#define MAX98520_PCM_FORMAT_TDM_MODE2 (0x5 << 3) +#define MAX98520_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6) +#define MAX98520_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6) +#define MAX98520_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6) +#define MAX98520_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6) + +/* MAX98520_R2041_PCM_CLK_SETUP */ +#define MAX98520_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 4) +#define MAX98520_PCM_CLK_SETUP_BSEL_MASK (0xF << 0) + +/* MAX98520_R2042_PCM_SR_SETUP */ +#define MAX98520_PCM_SR_SHIFT (0) +#define MAX98520_IVADC_SR_SHIFT (4) +#define MAX98520_PCM_SR_MASK (0xF << MAX98520_PCM_SR_SHIFT) +#define MAX98520_IVADC_SR_MASK (0xF << MAX98520_IVADC_SR_SHIFT) +#define MAX98520_PCM_SR_8000 (0x0) +#define MAX98520_PCM_SR_11025 (0x1) +#define MAX98520_PCM_SR_12000 (0x2) +#define MAX98520_PCM_SR_16000 (0x3) +#define MAX98520_PCM_SR_22050 (0x4) +#define MAX98520_PCM_SR_24000 (0x5) +#define MAX98520_PCM_SR_32000 (0x6) +#define MAX98520_PCM_SR_44100 (0x7) +#define MAX98520_PCM_SR_48000 (0x8) +#define MAX98520_PCM_SR_88200 (0x9) +#define MAX98520_PCM_SR_96000 (0xA) +#define MAX98520_PCM_SR_176400 (0xB) +#define MAX98520_PCM_SR_192000 (0xC) + +/* MAX98520_R2044_PCM_RX_SRC2 */ +#define MAX98520_PCM_DMIX_CH1_SHIFT (0xF << 0) +#define MAX98520_PCM_DMIX_CH0_SRC_MASK (0xF << 0) +#define MAX98520_PCM_DMIX_CH1_SRC_MASK (0xF << MAX98520_PCM_DMIX_CH1_SHIFT) + +/* MAX98520_R204F_PCM_RX_EN */ +#define MAX98520_PCM_RX_EN_MASK (0x1 << 0) +#define MAX98520_PCM_RX_BYP_EN_MASK (0x1 << 1) + +/* MAX98520_R2092_AMP_DSP_CFG */ +#define MAX98520_DSP_SPK_DCBLK_EN_SHIFT (0) +#define MAX98520_DSP_SPK_DITH_EN_SHIFT (1) +#define MAX98520_DSP_SPK_INVERT_SHIFT (2) +#define MAX98520_DSP_SPK_VOL_RMPUP_SHIFT (3) +#define MAX98520_DSP_SPK_VOL_RMPDN_SHIFT (4) +#define MAX98520_DSP_SPK_SAFE_EN_SHIFT (5) + +#define MAX98520_SPK_SAFE_EN_MASK (0x1 << MAX98520_DSP_SPK_SAFE_EN_SHIFT) + +/* MAX98520_R2094_SSM_CFG */ +#define MAX98520_SSM_EN_SHIFT (0) +#define MAX98520_SSM_MOD_SHIFT (1) +#define MAX98520_SSM_RCVR_MODE_SHIFT (3) + +/* MAX98520_R2095_AMP_CFG */ +#define MAX98520_CFG_DYN_MODE_SHIFT (4) +#define MAX98520_CFG_SPK_MODE_SHIFT (3) + +/* MAX98520_R20D0_DHT_CFG1 */ +#define MAX98520_DHT_VROT_PNT_SHIFT (0) + +/* MAX98520_R20D1_LIMITER_CFG1 */ +#define MAX98520_DHT_SUPPLY_HR_SHIFT (0) + +/* MAX98520_R20D2_DHT_CFG2 */ +#define MAX98520_DHT_LIMITER_MODE_SHIFT (0) +#define MAX98520_DHT_LIMITER_THRESHOLD_SHIFT (1) + +/* MAX98520_R20D3_DHT_CFG2 */ +#define MAX98520_DHT_MAX_ATTEN_SHIFT (0) + +/* MAX98520_R20D6_DHT_HYSTERESIS_CFG */ +#define MAX98520_DHT_HYSTERESIS_SWITCH_SHIFT (0) +#define MAX98520_DHT_HYSTERESIS_SHIFT (1) + +/* MAX98520_R20B2_ADC_PVDD0_CFG, MAX98520_R20B3_ADC_THERMAL_CFG */ +#define MAX98520_FLT_EN_SHIFT (4) + +struct max98520_priv { + struct regmap *regmap; + int reset_gpio; + unsigned int ch_size; + bool tdm_mode; +}; +#endif + -- 2.25.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver @ 2021-10-18 8:35 ` George Song 0 siblings, 0 replies; 14+ messages in thread From: George Song @ 2021-10-18 8:35 UTC (permalink / raw) To: lgirdwood, broonie, robh+dt Cc: alsa-devel, devicetree, linux-kernel, george.song, ryans.lee, steves.lee, George Song add max98520 audio amplifier driver Signed-off-by: George Song <george.song@maximintegrated.com> --- sound/soc/codecs/Kconfig | 12 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98520.c | 770 ++++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98520.h | 159 ++++++++ 4 files changed, 943 insertions(+) create mode 100644 sound/soc/codecs/max98520.c create mode 100644 sound/soc/codecs/max98520.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 82ee233a269d..e8817029c671 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -115,6 +115,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_MAX98357A imply SND_SOC_MAX98371 imply SND_SOC_MAX98504 + imply SND_SOC_MAX98520 imply SND_SOC_MAX9867 imply SND_SOC_MAX98925 imply SND_SOC_MAX98926 @@ -922,6 +923,17 @@ config SND_SOC_MAX98927 tristate "Maxim Integrated MAX98927 Speaker Amplifier" depends on I2C +config SND_SOC_MAX98520 + tristate "Maxim Integrated MAX98520 Speaker Amplifier" + depends on I2C + help + Enable support for Maxim Integrated MAX98520 audio + amplifier, which implements a tripler charge pump + based boost converter and support sample rates of + 8KHz to 192KHz. + + To compile this driver as a module, choose M here. + config SND_SOC_MAX98373 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 8dcea2c4604a..daf63e31fdd0 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -123,6 +123,7 @@ snd-soc-max9867-objs := max9867.o snd-soc-max98925-objs := max98925.o snd-soc-max98926-objs := max98926.o snd-soc-max98927-objs := max98927.o +snd-soc-max98520-objs := max98520.o snd-soc-max98373-objs := max98373.o snd-soc-max98373-i2c-objs := max98373-i2c.o snd-soc-max98373-sdw-objs := max98373-sdw.o @@ -450,6 +451,7 @@ obj-$(CONFIG_SND_SOC_MAX9867) += snd-soc-max9867.o obj-$(CONFIG_SND_SOC_MAX98925) += snd-soc-max98925.o obj-$(CONFIG_SND_SOC_MAX98926) += snd-soc-max98926.o obj-$(CONFIG_SND_SOC_MAX98927) += snd-soc-max98927.o +obj-$(CONFIG_SND_SOC_MAX98520) += snd-soc-max98520.o obj-$(CONFIG_SND_SOC_MAX98373) += snd-soc-max98373.o obj-$(CONFIG_SND_SOC_MAX98373_I2C) += snd-soc-max98373-i2c.o obj-$(CONFIG_SND_SOC_MAX98373_SDW) += snd-soc-max98373-sdw.o diff --git a/sound/soc/codecs/max98520.c b/sound/soc/codecs/max98520.c new file mode 100644 index 000000000000..163cc0f106af --- /dev/null +++ b/sound/soc/codecs/max98520.c @@ -0,0 +1,770 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2021, Maxim Integrated + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/cdev.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <sound/tlv.h> +#include "max98520.h" + +static struct reg_default max98520_reg[] = { + {MAX98520_R2000_SW_RESET, 0x00}, + {MAX98520_R2001_STATUS_1, 0x00}, + {MAX98520_R2002_STATUS_2, 0x00}, + {MAX98520_R2020_THERM_WARN_THRESH, 0x46}, + {MAX98520_R2021_THERM_SHDN_THRESH, 0x64}, + {MAX98520_R2022_THERM_HYSTERESIS, 0x02}, + {MAX98520_R2023_THERM_FOLDBACK_SET, 0x31}, + {MAX98520_R2027_THERM_FOLDBACK_EN, 0x01}, + {MAX98520_R2030_CLK_MON_CTRL, 0x00}, + {MAX98520_R2037_ERR_MON_CTRL, 0x01}, + {MAX98520_R2040_PCM_MODE_CFG, 0xC0}, + {MAX98520_R2041_PCM_CLK_SETUP, 0x04}, + {MAX98520_R2042_PCM_SR_SETUP, 0x08}, + {MAX98520_R2043_PCM_RX_SRC1, 0x00}, + {MAX98520_R2044_PCM_RX_SRC2, 0x00}, + {MAX98520_R204F_PCM_RX_EN, 0x00}, + {MAX98520_R2090_AMP_VOL_CTRL, 0x00}, + {MAX98520_R2091_AMP_PATH_GAIN, 0x03}, + {MAX98520_R2092_AMP_DSP_CFG, 0x02}, + {MAX98520_R2094_SSM_CFG, 0x01}, + {MAX98520_R2095_AMP_CFG, 0xF0}, + {MAX98520_R209F_AMP_EN, 0x00}, + {MAX98520_R20B0_ADC_SR, 0x00}, + {MAX98520_R20B1_ADC_RESOLUTION, 0x00}, + {MAX98520_R20B2_ADC_PVDD0_CFG, 0x02}, + {MAX98520_R20B3_ADC_THERMAL_CFG, 0x02}, + {MAX98520_R20B4_ADC_READBACK_CTRL, 0x00}, + {MAX98520_R20B5_ADC_READBACK_UPDATE, 0x00}, + {MAX98520_R20B6_ADC_PVDD_READBACK_MSB, 0x00}, + {MAX98520_R20B7_ADC_PVDD_READBACK_LSB, 0x00}, + {MAX98520_R20B8_ADC_TEMP_READBACK_MSB, 0x00}, + {MAX98520_R20B9_ADC_TEMP_READBACK_LSB, 0x00}, + {MAX98520_R20BA_ADC_LOW_PVDD_READBACK_MSB, 0xFF}, + {MAX98520_R20BB_ADC_LOW_READBACK_LSB, 0x01}, + {MAX98520_R20BC_ADC_HIGH_TEMP_READBACK_MSB, 0x00}, + {MAX98520_R20BD_ADC_HIGH_TEMP_READBACK_LSB, 0x00}, + {MAX98520_R20CF_MEAS_ADC_CFG, 0x00}, + {MAX98520_R20D0_DHT_CFG1, 0x00}, + {MAX98520_R20D1_LIMITER_CFG1, 0x08}, + {MAX98520_R20D2_LIMITER_CFG2, 0x00}, + {MAX98520_R20D3_DHT_CFG2, 0x14}, + {MAX98520_R20D4_DHT_CFG3, 0x02}, + {MAX98520_R20D5_DHT_CFG4, 0x04}, + {MAX98520_R20D6_DHT_HYSTERESIS_CFG, 0x07}, + {MAX98520_R20D8_DHT_EN, 0x00}, + {MAX98520_R210E_AUTO_RESTART_BEHAVIOR, 0x00}, + {MAX98520_R210F_GLOBAL_EN, 0x00}, + {MAX98520_R21FF_REVISION_ID, 0x00}, +}; + +static int max98520_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + unsigned int format = 0; + unsigned int invert = 0; + + dev_dbg(component->dev, "%s: fmt 0x%08X\n", __func__, fmt); + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + invert = MAX98520_PCM_MODE_CFG_PCM_BCLKEDGE; + break; + default: + dev_err(component->dev, "DAI invert mode unsupported\n"); + return -EINVAL; + } + + regmap_update_bits(max98520->regmap, + MAX98520_R2041_PCM_CLK_SETUP, + MAX98520_PCM_MODE_CFG_PCM_BCLKEDGE, + invert); + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format = MAX98520_PCM_FORMAT_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + format = MAX98520_PCM_FORMAT_LJ; + break; + case SND_SOC_DAIFMT_DSP_A: + format = MAX98520_PCM_FORMAT_TDM_MODE1; + break; + case SND_SOC_DAIFMT_DSP_B: + format = MAX98520_PCM_FORMAT_TDM_MODE0; + break; + default: + return -EINVAL; + } + + regmap_update_bits(max98520->regmap, + MAX98520_R2040_PCM_MODE_CFG, + MAX98520_PCM_MODE_CFG_FORMAT_MASK, + format << MAX98520_PCM_MODE_CFG_FORMAT_SHIFT); + + return 0; +} + +/* BCLKs per LRCLK */ +static const int bclk_sel_table[] = { + 32, 48, 64, 96, 128, 192, 256, 384, 512, 320, +}; + +static int max98520_get_bclk_sel(int bclk) +{ + int i; + /* match BCLKs per LRCLK */ + for (i = 0; i < ARRAY_SIZE(bclk_sel_table); i++) { + if (bclk_sel_table[i] == bclk) + return i + 2; + } + return 0; +} + +static int max98520_set_clock(struct snd_soc_component *component, + struct snd_pcm_hw_params *params) +{ + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + /* BCLK/LRCLK ratio calculation */ + int blr_clk_ratio = params_channels(params) * max98520->ch_size; + int value; + + if (!max98520->tdm_mode) { + /* BCLK configuration */ + value = max98520_get_bclk_sel(blr_clk_ratio); + if (!value) { + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + return -EINVAL; + } + + regmap_update_bits(max98520->regmap, + MAX98520_R2041_PCM_CLK_SETUP, + MAX98520_PCM_CLK_SETUP_BSEL_MASK, + value); + } + dev_dbg(component->dev, "%s tdm_mode:%d out\n", __func__, max98520->tdm_mode); + return 0; +} + +static int max98520_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + unsigned int sampling_rate = 0; + unsigned int chan_sz = 0; + + /* pcm mode configuration */ + switch (snd_pcm_format_width(params_format(params))) { + case 16: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + params_format(params)); + goto err; + } + + max98520->ch_size = snd_pcm_format_width(params_format(params)); + + regmap_update_bits(max98520->regmap, + MAX98520_R2040_PCM_MODE_CFG, + MAX98520_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + dev_dbg(component->dev, "format supported %d", + params_format(params)); + + /* sampling rate configuration */ + switch (params_rate(params)) { + case 8000: + sampling_rate = MAX98520_PCM_SR_8000; + break; + case 11025: + sampling_rate = MAX98520_PCM_SR_11025; + break; + case 12000: + sampling_rate = MAX98520_PCM_SR_12000; + break; + case 16000: + sampling_rate = MAX98520_PCM_SR_16000; + break; + case 22050: + sampling_rate = MAX98520_PCM_SR_22050; + break; + case 24000: + sampling_rate = MAX98520_PCM_SR_24000; + break; + case 32000: + sampling_rate = MAX98520_PCM_SR_32000; + break; + case 44100: + sampling_rate = MAX98520_PCM_SR_44100; + break; + case 48000: + sampling_rate = MAX98520_PCM_SR_48000; + break; + case 88200: + sampling_rate = MAX98520_PCM_SR_88200; + break; + case 96000: + sampling_rate = MAX98520_PCM_SR_96000; + break; + case 176400: + sampling_rate = MAX98520_PCM_SR_176400; + break; + case 192000: + sampling_rate = MAX98520_PCM_SR_192000; + break; + default: + dev_err(component->dev, "rate %d not supported\n", + params_rate(params)); + goto err; + } + + dev_dbg(component->dev, " %s ch_size: %d, sampling rate : %d out\n", __func__, + snd_pcm_format_width(params_format(params)), params_rate(params)); + /* set DAI_SR to correct LRCLK frequency */ + regmap_update_bits(max98520->regmap, + MAX98520_R2042_PCM_SR_SETUP, + MAX98520_PCM_SR_MASK, + sampling_rate); + + return max98520_set_clock(component, params); +err: + dev_dbg(component->dev, "%s out error", __func__); + return -EINVAL; +} + +static int max98520_dai_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + int bsel = 0; + unsigned int chan_sz = 0; + + if (!tx_mask && !rx_mask && !slots && !slot_width) + max98520->tdm_mode = false; + else + max98520->tdm_mode = true; + + /* BCLK configuration */ + bsel = max98520_get_bclk_sel(slots * slot_width); + if (bsel == 0) { + dev_err(component->dev, "BCLK %d not supported\n", + slots * slot_width); + return -EINVAL; + } + + regmap_update_bits(max98520->regmap, + MAX98520_R2041_PCM_CLK_SETUP, + MAX98520_PCM_CLK_SETUP_BSEL_MASK, + bsel); + + /* Channel size configuration */ + switch (slot_width) { + case 16: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_16; + break; + case 24: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_24; + break; + case 32: + chan_sz = MAX98520_PCM_MODE_CFG_CHANSZ_32; + break; + default: + dev_err(component->dev, "format unsupported %d\n", + slot_width); + return -EINVAL; + } + + regmap_update_bits(max98520->regmap, + MAX98520_R2040_PCM_MODE_CFG, + MAX98520_PCM_MODE_CFG_CHANSZ_MASK, chan_sz); + + /* Rx slot configuration */ + regmap_update_bits(max98520->regmap, + MAX98520_R2044_PCM_RX_SRC2, + MAX98520_PCM_DMIX_CH0_SRC_MASK, + rx_mask); + regmap_update_bits(max98520->regmap, + MAX98520_R2044_PCM_RX_SRC2, + MAX98520_PCM_DMIX_CH1_SRC_MASK, + rx_mask << MAX98520_PCM_DMIX_CH1_SHIFT); + + return 0; +} + +#define MAX98520_RATES SNDRV_PCM_RATE_8000_192000 + +#define MAX98520_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static const struct snd_soc_dai_ops max98520_dai_ops = { + .set_fmt = max98520_dai_set_fmt, + .hw_params = max98520_dai_hw_params, + .set_tdm_slot = max98520_dai_tdm_slot, +}; + +static int max98520_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + dev_dbg(component->dev, " AMP ON\n"); + + regmap_write(max98520->regmap, MAX98520_R210F_GLOBAL_EN, 1); + usleep_range(30000, 31000); + break; + case SND_SOC_DAPM_POST_PMD: + dev_dbg(component->dev, " AMP OFF\n"); + + regmap_write(max98520->regmap, MAX98520_R210F_GLOBAL_EN, 0); + usleep_range(30000, 31000); + max98520->tdm_mode = false; + break; + default: + return 0; + } + return 0; +} + +static const char * const max98520_switch_text[] = { + "Left", "Right", "LeftRight"}; + +static const struct soc_enum dai_sel_enum = + SOC_ENUM_SINGLE(MAX98520_R2043_PCM_RX_SRC1, + 0, 3, max98520_switch_text); + +static const struct snd_kcontrol_new max98520_dai_controls = + SOC_DAPM_ENUM("DAI Sel", dai_sel_enum); + +static const struct snd_soc_dapm_widget max98520_dapm_widgets[] = { + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", + MAX98520_R209F_AMP_EN, 0, 0, max98520_dac_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MUX("DAI Sel Mux", SND_SOC_NOPM, 0, 0, &max98520_dai_controls), + SND_SOC_DAPM_OUTPUT("BE_OUT"), +}; + +static DECLARE_TLV_DB_SCALE(max98520_digital_tlv, -6300, 50, 1); +static const DECLARE_TLV_DB_RANGE(max98520_spk_tlv, + 0, 5, TLV_DB_SCALE_ITEM(600, 300, 0), +); + +static const DECLARE_TLV_DB_RANGE(max98520_dht_lim_thresh_tlv, + 0, 15, TLV_DB_SCALE_ITEM(-1500, 100, 0), +); + +static const DECLARE_TLV_DB_RANGE(max98520_dht_hysteresis_tlv, + 0, 3, TLV_DB_SCALE_ITEM(100, 100, 0), + 4, 7, TLV_DB_SCALE_ITEM(600, 200, 0), +); + +static const DECLARE_TLV_DB_RANGE(max98520_dht_rotation_point_tlv, + 0, 1, TLV_DB_SCALE_ITEM(-1500, 300, 0), + 2, 4, TLV_DB_SCALE_ITEM(-1000, 200, 0), + 5, 10, TLV_DB_SCALE_ITEM(-500, 100, 0), +); + +static const DECLARE_TLV_DB_RANGE(max98520_dht_supply_hr_tlv, + 0, 16, TLV_DB_SCALE_ITEM(-2000, 250, 0), +); + +static const DECLARE_TLV_DB_RANGE(max98520_dht_max_atten_tlv, + 1, 20, TLV_DB_SCALE_ITEM(-2000, 100, 0), +); + +static const char * const max98520_dht_attack_rate_text[] = { + "20us", "40us", "80us", "160us", "320us", "640us", + "1.28ms", "2.56ms", "5.12ms", "10.24ms", "20.48ms", "40.96ms", + "81.92ms", "163.84ms" +}; + +static SOC_ENUM_SINGLE_DECL(max98520_dht_attack_rate_enum, + MAX98520_R20D4_DHT_CFG3, 0, + max98520_dht_attack_rate_text); + +static const char * const max98520_dht_release_rate_text[] = { + "2ms", "4ms", "8ms", "16ms", "32ms", "64ms", "128ms", "256ms", "512ms", + "1.024s", "2.048s", "4.096s", "8.192s", "16.384s" +}; + +static SOC_ENUM_SINGLE_DECL(max98520_dht_release_rate_enum, + MAX98520_R20D5_DHT_CFG4, 0, + max98520_dht_release_rate_text); + +static bool max98520_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98520_R2000_SW_RESET: + case MAX98520_R2027_THERM_FOLDBACK_EN: + case MAX98520_R2030_CLK_MON_CTRL: + case MAX98520_R2037_ERR_MON_CTRL: + case MAX98520_R204F_PCM_RX_EN: + case MAX98520_R209F_AMP_EN: + case MAX98520_R20CF_MEAS_ADC_CFG: + case MAX98520_R20D8_DHT_EN: + case MAX98520_R21FF_REVISION_ID: + case MAX98520_R2001_STATUS_1... MAX98520_R2002_STATUS_2: + case MAX98520_R2020_THERM_WARN_THRESH... MAX98520_R2023_THERM_FOLDBACK_SET: + case MAX98520_R2040_PCM_MODE_CFG... MAX98520_R2044_PCM_RX_SRC2: + case MAX98520_R2090_AMP_VOL_CTRL... MAX98520_R2092_AMP_DSP_CFG: + case MAX98520_R2094_SSM_CFG... MAX98520_R2095_AMP_CFG: + case MAX98520_R20B0_ADC_SR... MAX98520_R20BD_ADC_HIGH_TEMP_READBACK_LSB: + case MAX98520_R20D0_DHT_CFG1... MAX98520_R20D6_DHT_HYSTERESIS_CFG: + case MAX98520_R210E_AUTO_RESTART_BEHAVIOR... MAX98520_R210F_GLOBAL_EN: + case MAX98520_R2161_BOOST_TM1... MAX98520_R2163_BOOST_TM3: + return true; + default: + return false; + } +}; + +static bool max98520_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX98520_R210F_GLOBAL_EN: + case MAX98520_R21FF_REVISION_ID: + case MAX98520_R2000_SW_RESET: + case MAX98520_R2001_STATUS_1 ... MAX98520_R2002_STATUS_2: + case MAX98520_R20B4_ADC_READBACK_CTRL + ... MAX98520_R20BD_ADC_HIGH_TEMP_READBACK_LSB: + return true; + default: + return false; + } +} + +static const struct snd_kcontrol_new max98520_snd_controls[] = { +/* Volume */ +SOC_SINGLE_TLV("Digital Volume", MAX98520_R2090_AMP_VOL_CTRL, + 0, 0x7F, 1, max98520_digital_tlv), +SOC_SINGLE_TLV("Speaker Volume", MAX98520_R2091_AMP_PATH_GAIN, + 0, 0x5, 0, max98520_spk_tlv), +/* Volume Ramp Up/Down Enable*/ +SOC_SINGLE("Ramp Up Switch", MAX98520_R2092_AMP_DSP_CFG, + MAX98520_DSP_SPK_VOL_RMPUP_SHIFT, 1, 0), +SOC_SINGLE("Ramp Down Switch", MAX98520_R2092_AMP_DSP_CFG, + MAX98520_DSP_SPK_VOL_RMPDN_SHIFT, 1, 0), +/* Clock Monitor Enable */ +SOC_SINGLE("CLK Monitor Switch", MAX98520_R2037_ERR_MON_CTRL, + MAX98520_CTRL_CMON_EN_SHIFT, 1, 0), +/* Clock Monitor Config */ +SOC_SINGLE("CLKMON Autorestart Switch", MAX98520_R2030_CLK_MON_CTRL, + MAX98520_CMON_AUTORESTART_SHIFT, 1, 0), +/* Dither Enable */ +SOC_SINGLE("Dither Switch", MAX98520_R2092_AMP_DSP_CFG, + MAX98520_DSP_SPK_DITH_EN_SHIFT, 1, 0), +/* DC Blocker Enable */ +SOC_SINGLE("DC Blocker Switch", MAX98520_R2092_AMP_DSP_CFG, + MAX98520_DSP_SPK_DCBLK_EN_SHIFT, 1, 0), +/* Speaker Safe Mode Enable */ +SOC_SINGLE("Speaker Safemode Switch", MAX98520_R2092_AMP_DSP_CFG, + MAX98520_DSP_SPK_SAFE_EN_SHIFT, 1, 0), +/* AMP SSM Enable */ +SOC_SINGLE("CP Bypass Switch", MAX98520_R2094_SSM_CFG, + MAX98520_SSM_RCVR_MODE_SHIFT, 1, 0), +/* AMP Dynamic Mode Configuration */ +SOC_SINGLE("Dynamic Mode Switch", MAX98520_R2095_AMP_CFG, + MAX98520_CFG_DYN_MODE_SHIFT, 1, 1), +/* AMP Speaker Mode Switch */ +SOC_SINGLE("Speaker Mode Switch", MAX98520_R2095_AMP_CFG, + MAX98520_CFG_SPK_MODE_SHIFT, 1, 0), +/* Dynamic Headroom Tracking */ +SOC_SINGLE("DHT Switch", MAX98520_R20D8_DHT_EN, 0, 1, 0), +SOC_SINGLE("DHT Limiter Mode", MAX98520_R20D2_LIMITER_CFG2, + MAX98520_DHT_LIMITER_MODE_SHIFT, 1, 0), +SOC_SINGLE("DHT Hysteresis Switch", MAX98520_R20D6_DHT_HYSTERESIS_CFG, + MAX98520_DHT_HYSTERESIS_SWITCH_SHIFT, 1, 0), +SOC_SINGLE_TLV("DHT Rot Pnt", MAX98520_R20D0_DHT_CFG1, + MAX98520_DHT_VROT_PNT_SHIFT, 10, 1, max98520_dht_rotation_point_tlv), +SOC_SINGLE_TLV("DHT Supply Headroom", MAX98520_R20D1_LIMITER_CFG1, + MAX98520_DHT_SUPPLY_HR_SHIFT, 16, 0, max98520_dht_supply_hr_tlv), +SOC_SINGLE_TLV("DHT Limiter Threshold", MAX98520_R20D2_LIMITER_CFG2, + MAX98520_DHT_LIMITER_THRESHOLD_SHIFT, 0xF, 1, max98520_dht_lim_thresh_tlv), +SOC_SINGLE_TLV("DHT Max Attenuation", MAX98520_R20D3_DHT_CFG2, + MAX98520_DHT_MAX_ATTEN_SHIFT, 20, 1, max98520_dht_max_atten_tlv), +SOC_SINGLE_TLV("DHT Hysteresis", MAX98520_R20D6_DHT_HYSTERESIS_CFG, + MAX98520_DHT_HYSTERESIS_SHIFT, 0x7, 0, max98520_dht_hysteresis_tlv), +SOC_ENUM("DHT Attack Rate", max98520_dht_attack_rate_enum), +SOC_ENUM("DHT Release Rate", max98520_dht_release_rate_enum), +/* ADC configuration */ +SOC_SINGLE("ADC PVDD CH Switch", MAX98520_R20CF_MEAS_ADC_CFG, 0, 1, 0), +SOC_SINGLE("ADC PVDD FLT Switch", MAX98520_R20B2_ADC_PVDD0_CFG, MAX98520_FLT_EN_SHIFT, 1, 0), +SOC_SINGLE("ADC TEMP FLT Switch", MAX98520_R20B3_ADC_THERMAL_CFG, MAX98520_FLT_EN_SHIFT, 1, 0), +SOC_SINGLE("ADC PVDD MSB", MAX98520_R20B6_ADC_PVDD_READBACK_MSB, 0, 0xFF, 0), +SOC_SINGLE("ADC PVDD LSB", MAX98520_R20B7_ADC_PVDD_READBACK_LSB, 0, 0x01, 0), +SOC_SINGLE("ADC TEMP MSB", MAX98520_R20B8_ADC_TEMP_READBACK_MSB, 0, 0xFF, 0), +SOC_SINGLE("ADC TEMP LSB", MAX98520_R20B9_ADC_TEMP_READBACK_LSB, 0, 0x01, 0), +}; + +static const struct snd_soc_dapm_route max98520_audio_map[] = { + /* Plabyack */ + {"DAI Sel Mux", "Left", "Amp Enable"}, + {"DAI Sel Mux", "Right", "Amp Enable"}, + {"DAI Sel Mux", "LeftRight", "Amp Enable"}, + {"BE_OUT", NULL, "DAI Sel Mux"}, +}; + +static struct snd_soc_dai_driver max98520_dai[] = { + { + .name = "max98520-aif1", + .playback = { + .stream_name = "HiFi Playback", + .channels_min = 1, + .channels_max = 2, + .rates = MAX98520_RATES, + .formats = MAX98520_FORMATS, + }, + .ops = &max98520_dai_ops, + } + +}; + +static void max98520_reset(struct max98520_priv *max98520, struct device *dev) +{ + int ret, reg, count; + + /* Software Reset */ + ret = regmap_write(max98520->regmap, MAX98520_R2000_SW_RESET, 1); + if (ret) + dev_err(dev, "Reset command failed. (ret:%d)\n", ret); + + count = 0; + while (count < 3) { + usleep_range(10000, 11000); + /* Software Reset Verification */ + ret = regmap_read(max98520->regmap, MAX98520_R21FF_REVISION_ID, ®); + if (!ret) { + dev_info(dev, "Reset completed (retry:%d)\n", count); + return; + } + count++; + } + dev_err(dev, "Reset failed. (ret:%d)\n", ret); +} + +static int max98520_probe(struct snd_soc_component *component) +{ + struct max98520_priv *max98520 = + snd_soc_component_get_drvdata(component); + + /* Software Reset */ + max98520_reset(max98520, component->dev); + usleep_range(30000, 31000); + + /* L/R mix configuration */ + regmap_write(max98520->regmap, MAX98520_R2043_PCM_RX_SRC1, 0x2); + + regmap_write(max98520->regmap, MAX98520_R2044_PCM_RX_SRC2, 0x10); + /* Enable DC blocker */ + regmap_update_bits(max98520->regmap, MAX98520_R2092_AMP_DSP_CFG, 1, 1); + /* Disable Speaker Safe Mode */ + regmap_update_bits(max98520->regmap, + MAX98520_R2092_AMP_DSP_CFG, MAX98520_SPK_SAFE_EN_MASK, 0); + /* Enable Clock Monitor Auto-restart */ + regmap_write(max98520->regmap, MAX98520_R2030_CLK_MON_CTRL, 0x1); + + /* Hard coded values for the experiments */ + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x54); + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x4d); + regmap_write(max98520->regmap, MAX98520_R2161_BOOST_TM1, 0x2); + regmap_write(max98520->regmap, MAX98520_R2095_AMP_CFG, 0xc8); + + /* set Rx Enable */ + regmap_update_bits(max98520->regmap, + MAX98520_R204F_PCM_RX_EN, + MAX98520_PCM_RX_EN_MASK, + 1); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max98520_suspend(struct device *dev) +{ + struct max98520_priv *max98520 = dev_get_drvdata(dev); + + regcache_cache_only(max98520->regmap, true); + regcache_mark_dirty(max98520->regmap); + return 0; +} + +static int max98520_resume(struct device *dev) +{ + struct max98520_priv *max98520 = dev_get_drvdata(dev); + + regcache_cache_only(max98520->regmap, false); + max98520_reset(max98520, dev); + regcache_sync(max98520->regmap); + return 0; +} +#endif + +static const struct dev_pm_ops max98520_pm = { + SET_SYSTEM_SLEEP_PM_OPS(max98520_suspend, max98520_resume) +}; + +static const struct snd_soc_component_driver soc_codec_dev_max98520 = { + .probe = max98520_probe, + .controls = max98520_snd_controls, + .num_controls = ARRAY_SIZE(max98520_snd_controls), + .dapm_widgets = max98520_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(max98520_dapm_widgets), + .dapm_routes = max98520_audio_map, + .num_dapm_routes = ARRAY_SIZE(max98520_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config max98520_regmap = { + .reg_bits = 16, + .val_bits = 8, + .max_register = MAX98520_R21FF_REVISION_ID, + .reg_defaults = max98520_reg, + .num_reg_defaults = ARRAY_SIZE(max98520_reg), + .readable_reg = max98520_readable_register, + .volatile_reg = max98520_volatile_reg, + .cache_type = REGCACHE_RBTREE, +}; + +static int max98520_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + int ret = 0; + int reg = 0; + struct max98520_priv *max98520 = NULL; + struct i2c_adapter *adapter = to_i2c_adapter(i2c->dev.parent); + + ret = i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) { + dev_err(&i2c->dev, "I2C check functionality failed\n"); + return -ENXIO; + } + + max98520 = devm_kzalloc(&i2c->dev, sizeof(*max98520), GFP_KERNEL); + + if (!max98520) { + ret = -ENOMEM; + return ret; + } + i2c_set_clientdata(i2c, max98520); + + /* regmap initialization */ + max98520->regmap = + devm_regmap_init_i2c(i2c, &max98520_regmap); + if (IS_ERR(max98520->regmap)) { + ret = PTR_ERR(max98520->regmap); + dev_err(&i2c->dev, + "Failed to allocate regmap: %d\n", ret); + return ret; + } + + /* Power on device */ + if (gpio_is_valid(max98520->reset_gpio)) { + ret = devm_gpio_request(&i2c->dev, max98520->reset_gpio, + "MAX98520_RESET"); + if (ret) { + dev_err(&i2c->dev, "%s: Failed to request gpio %d\n", + __func__, max98520->reset_gpio); + return -EINVAL; + } + gpio_direction_output(max98520->reset_gpio, 0); + msleep(50); + gpio_direction_output(max98520->reset_gpio, 1); + msleep(20); + } + + /* Check Revision ID */ + ret = regmap_read(max98520->regmap, MAX98520_R21FF_REVISION_ID, ®); + if (ret < 0) { + dev_err(&i2c->dev, + "Failed to read: 0x%02X\n", MAX98520_R21FF_REVISION_ID); + return ret; + } + dev_info(&i2c->dev, "MAX98520 revisionID: 0x%02X\n", reg); + + /* codec registration */ + ret = devm_snd_soc_register_component(&i2c->dev, + &soc_codec_dev_max98520, + max98520_dai, ARRAY_SIZE(max98520_dai)); + if (ret < 0) + dev_err(&i2c->dev, "Failed to register codec: %d\n", ret); + + return ret; +} + +static const struct i2c_device_id max98520_i2c_id[] = { + { "max98520", 0}, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, max98520_i2c_id); + +#if defined(CONFIG_OF) +static const struct of_device_id max98520_of_match[] = { + { .compatible = "maxim,max98520", }, + { } +}; +MODULE_DEVICE_TABLE(of, max98520_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max98520_acpi_match[] = { + { "MX98520", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, max98520_acpi_match); +#endif + +static struct i2c_driver max98520_i2c_driver = { + .driver = { + .name = "max98520", + .of_match_table = of_match_ptr(max98520_of_match), + .acpi_match_table = ACPI_PTR(max98520_acpi_match), + .pm = &max98520_pm, + }, + .probe = max98520_i2c_probe, + .id_table = max98520_i2c_id, +}; + +module_i2c_driver(max98520_i2c_driver) + +MODULE_DESCRIPTION("ALSA SoC MAX98520 driver"); +MODULE_AUTHOR("George Song <george.song@maximintegrated.com>"); +MODULE_LICENSE("GPL"); + diff --git a/sound/soc/codecs/max98520.h b/sound/soc/codecs/max98520.h new file mode 100644 index 000000000000..afb5f3917136 --- /dev/null +++ b/sound/soc/codecs/max98520.h @@ -0,0 +1,159 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2021, Maxim Integrated. + */ + +#ifndef _MAX98520_H +#define _MAX98520_H + +#define MAX98520_R2000_SW_RESET 0x2000 +#define MAX98520_R2001_STATUS_1 0x2001 +#define MAX98520_R2002_STATUS_2 0x2002 +#define MAX98520_R2020_THERM_WARN_THRESH 0x2020 +#define MAX98520_R2021_THERM_SHDN_THRESH 0x2021 +#define MAX98520_R2022_THERM_HYSTERESIS 0x2022 +#define MAX98520_R2023_THERM_FOLDBACK_SET 0x2023 +#define MAX98520_R2027_THERM_FOLDBACK_EN 0x2027 +#define MAX98520_R2030_CLK_MON_CTRL 0x2030 +#define MAX98520_R2037_ERR_MON_CTRL 0x2037 +#define MAX98520_R2040_PCM_MODE_CFG 0x2040 +#define MAX98520_R2041_PCM_CLK_SETUP 0x2041 +#define MAX98520_R2042_PCM_SR_SETUP 0x2042 +#define MAX98520_R2043_PCM_RX_SRC1 0x2043 +#define MAX98520_R2044_PCM_RX_SRC2 0x2044 +#define MAX98520_R204F_PCM_RX_EN 0x204F +#define MAX98520_R2090_AMP_VOL_CTRL 0x2090 +#define MAX98520_R2091_AMP_PATH_GAIN 0x2091 +#define MAX98520_R2092_AMP_DSP_CFG 0x2092 +#define MAX98520_R2094_SSM_CFG 0x2094 +#define MAX98520_R2095_AMP_CFG 0x2095 +#define MAX98520_R209F_AMP_EN 0x209F +#define MAX98520_R20B0_ADC_SR 0x20B0 +#define MAX98520_R20B1_ADC_RESOLUTION 0x20B1 +#define MAX98520_R20B2_ADC_PVDD0_CFG 0x20B2 +#define MAX98520_R20B3_ADC_THERMAL_CFG 0x20B3 +#define MAX98520_R20B4_ADC_READBACK_CTRL 0x20B4 +#define MAX98520_R20B5_ADC_READBACK_UPDATE 0x20B5 +#define MAX98520_R20B6_ADC_PVDD_READBACK_MSB 0x20B6 +#define MAX98520_R20B7_ADC_PVDD_READBACK_LSB 0x20B7 +#define MAX98520_R20B8_ADC_TEMP_READBACK_MSB 0x20B8 +#define MAX98520_R20B9_ADC_TEMP_READBACK_LSB 0x20B9 +#define MAX98520_R20BA_ADC_LOW_PVDD_READBACK_MSB 0x20BA +#define MAX98520_R20BB_ADC_LOW_READBACK_LSB 0x20BB +#define MAX98520_R20BC_ADC_HIGH_TEMP_READBACK_MSB 0x20BC +#define MAX98520_R20BD_ADC_HIGH_TEMP_READBACK_LSB 0x20BD +#define MAX98520_R20CF_MEAS_ADC_CFG 0x20CF +#define MAX98520_R20D0_DHT_CFG1 0x20D0 +#define MAX98520_R20D1_LIMITER_CFG1 0x20D1 +#define MAX98520_R20D2_LIMITER_CFG2 0x20D2 +#define MAX98520_R20D3_DHT_CFG2 0x20D3 +#define MAX98520_R20D4_DHT_CFG3 0x20D4 +#define MAX98520_R20D5_DHT_CFG4 0x20D5 +#define MAX98520_R20D6_DHT_HYSTERESIS_CFG 0x20D6 +#define MAX98520_R20D8_DHT_EN 0x20D8 +#define MAX98520_R210E_AUTO_RESTART_BEHAVIOR 0x210E +#define MAX98520_R210F_GLOBAL_EN 0x210F +#define MAX98520_R2161_BOOST_TM1 0x2161 +#define MAX98520_R2162_BOOST_TM2 0x2162 +#define MAX98520_R2163_BOOST_TM3 0x2163 +#define MAX98520_R21FF_REVISION_ID 0x21FF + +/* MAX98520_R2030_CLK_MON_CTRL */ +#define MAX98520_CMON_AUTORESTART_SHIFT (0) + +/* MAX98520_R2037_ERR_MON_CTRL */ +#define MAX98520_CTRL_CMON_EN_SHIFT (0) + +/* MAX98520_R2040_PCM_MODE_CFG */ +#define MAX98520_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3) +#define MAX98520_PCM_MODE_CFG_FORMAT_SHIFT (3) +#define MAX98520_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 2) +#define MAX98520_PCM_FORMAT_I2S (0x0 << 3) +#define MAX98520_PCM_FORMAT_LJ (0x1 << 3) +#define MAX98520_PCM_FORMAT_TDM_MODE0 (0x3 << 3) +#define MAX98520_PCM_FORMAT_TDM_MODE1 (0x4 << 3) +#define MAX98520_PCM_FORMAT_TDM_MODE2 (0x5 << 3) +#define MAX98520_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6) +#define MAX98520_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6) +#define MAX98520_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6) +#define MAX98520_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6) + +/* MAX98520_R2041_PCM_CLK_SETUP */ +#define MAX98520_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 4) +#define MAX98520_PCM_CLK_SETUP_BSEL_MASK (0xF << 0) + +/* MAX98520_R2042_PCM_SR_SETUP */ +#define MAX98520_PCM_SR_SHIFT (0) +#define MAX98520_IVADC_SR_SHIFT (4) +#define MAX98520_PCM_SR_MASK (0xF << MAX98520_PCM_SR_SHIFT) +#define MAX98520_IVADC_SR_MASK (0xF << MAX98520_IVADC_SR_SHIFT) +#define MAX98520_PCM_SR_8000 (0x0) +#define MAX98520_PCM_SR_11025 (0x1) +#define MAX98520_PCM_SR_12000 (0x2) +#define MAX98520_PCM_SR_16000 (0x3) +#define MAX98520_PCM_SR_22050 (0x4) +#define MAX98520_PCM_SR_24000 (0x5) +#define MAX98520_PCM_SR_32000 (0x6) +#define MAX98520_PCM_SR_44100 (0x7) +#define MAX98520_PCM_SR_48000 (0x8) +#define MAX98520_PCM_SR_88200 (0x9) +#define MAX98520_PCM_SR_96000 (0xA) +#define MAX98520_PCM_SR_176400 (0xB) +#define MAX98520_PCM_SR_192000 (0xC) + +/* MAX98520_R2044_PCM_RX_SRC2 */ +#define MAX98520_PCM_DMIX_CH1_SHIFT (0xF << 0) +#define MAX98520_PCM_DMIX_CH0_SRC_MASK (0xF << 0) +#define MAX98520_PCM_DMIX_CH1_SRC_MASK (0xF << MAX98520_PCM_DMIX_CH1_SHIFT) + +/* MAX98520_R204F_PCM_RX_EN */ +#define MAX98520_PCM_RX_EN_MASK (0x1 << 0) +#define MAX98520_PCM_RX_BYP_EN_MASK (0x1 << 1) + +/* MAX98520_R2092_AMP_DSP_CFG */ +#define MAX98520_DSP_SPK_DCBLK_EN_SHIFT (0) +#define MAX98520_DSP_SPK_DITH_EN_SHIFT (1) +#define MAX98520_DSP_SPK_INVERT_SHIFT (2) +#define MAX98520_DSP_SPK_VOL_RMPUP_SHIFT (3) +#define MAX98520_DSP_SPK_VOL_RMPDN_SHIFT (4) +#define MAX98520_DSP_SPK_SAFE_EN_SHIFT (5) + +#define MAX98520_SPK_SAFE_EN_MASK (0x1 << MAX98520_DSP_SPK_SAFE_EN_SHIFT) + +/* MAX98520_R2094_SSM_CFG */ +#define MAX98520_SSM_EN_SHIFT (0) +#define MAX98520_SSM_MOD_SHIFT (1) +#define MAX98520_SSM_RCVR_MODE_SHIFT (3) + +/* MAX98520_R2095_AMP_CFG */ +#define MAX98520_CFG_DYN_MODE_SHIFT (4) +#define MAX98520_CFG_SPK_MODE_SHIFT (3) + +/* MAX98520_R20D0_DHT_CFG1 */ +#define MAX98520_DHT_VROT_PNT_SHIFT (0) + +/* MAX98520_R20D1_LIMITER_CFG1 */ +#define MAX98520_DHT_SUPPLY_HR_SHIFT (0) + +/* MAX98520_R20D2_DHT_CFG2 */ +#define MAX98520_DHT_LIMITER_MODE_SHIFT (0) +#define MAX98520_DHT_LIMITER_THRESHOLD_SHIFT (1) + +/* MAX98520_R20D3_DHT_CFG2 */ +#define MAX98520_DHT_MAX_ATTEN_SHIFT (0) + +/* MAX98520_R20D6_DHT_HYSTERESIS_CFG */ +#define MAX98520_DHT_HYSTERESIS_SWITCH_SHIFT (0) +#define MAX98520_DHT_HYSTERESIS_SHIFT (1) + +/* MAX98520_R20B2_ADC_PVDD0_CFG, MAX98520_R20B3_ADC_THERMAL_CFG */ +#define MAX98520_FLT_EN_SHIFT (4) + +struct max98520_priv { + struct regmap *regmap; + int reset_gpio; + unsigned int ch_size; + bool tdm_mode; +}; +#endif + -- 2.25.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver 2021-10-18 8:35 ` George Song @ 2021-10-18 12:38 ` Mark Brown -1 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2021-10-18 12:38 UTC (permalink / raw) To: George Song Cc: devicetree, alsa-devel, steves.lee, ryans.lee, george.song, lgirdwood, linux-kernel, robh+dt [-- Attachment #1: Type: text/plain, Size: 3298 bytes --] On Mon, Oct 18, 2021 at 05:35:54PM +0900, George Song wrote: > + case SND_SOC_DAPM_POST_PMD: > + dev_dbg(component->dev, " AMP OFF\n"); > + > + regmap_write(max98520->regmap, MAX98520_R210F_GLOBAL_EN, 0); > + usleep_range(30000, 31000); > + max98520->tdm_mode = false; > + break; Why would stopping the DAC put us out of TDM mode? Not that I can see anything which ever sets tdm_mode to anything other than false or checks the value... > +static const struct snd_soc_dapm_widget max98520_dapm_widgets[] = { > + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", > + MAX98520_R209F_AMP_EN, 0, 0, max98520_dac_event, > + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), I can't help think that the global enable ought to be a _SUPPLY widget, it would get enabled before the DAC rather than after it but it's not clear that the ordering is critical here. > +static DECLARE_TLV_DB_SCALE(max98520_digital_tlv, -6300, 50, 1); > +static const DECLARE_TLV_DB_RANGE(max98520_spk_tlv, > + 0, 5, TLV_DB_SCALE_ITEM(600, 300, 0), > +); Why is _digital_tlv not const? It's also a bit weird that _spk_tlv is a range with one entry not a scale. > + count = 0; > + while (count < 3) { > + usleep_range(10000, 11000); > + /* Software Reset Verification */ > + ret = regmap_read(max98520->regmap, MAX98520_R21FF_REVISION_ID, ®); > + if (!ret) { > + dev_info(dev, "Reset completed (retry:%d)\n", count); > + return; > + } > + count++; Does this really need to be logged? > + /* Software Reset */ > + max98520_reset(max98520, component->dev); > + usleep_range(30000, 31000); Shouldn't that delay be in the reset routine? Perhaps between the attempts to read the ID register? > + /* L/R mix configuration */ > + regmap_write(max98520->regmap, MAX98520_R2043_PCM_RX_SRC1, 0x2); > + > + regmap_write(max98520->regmap, MAX98520_R2044_PCM_RX_SRC2, 0x10); These should be exposed to the user, not hard coded - different systems may need different configurations. > + /* Disable Speaker Safe Mode */ > + regmap_update_bits(max98520->regmap, > + MAX98520_R2092_AMP_DSP_CFG, MAX98520_SPK_SAFE_EN_MASK, 0); This seems like something that should be left as is by default given the name (or forced on if it were disabled by default)? > + /* Hard coded values for the experiments */ > + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x54); > + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x4d); > + regmap_write(max98520->regmap, MAX98520_R2161_BOOST_TM1, 0x2); > + regmap_write(max98520->regmap, MAX98520_R2095_AMP_CFG, 0xc8); This doesn't seem suitable for upstream. > + /* Power on device */ > + if (gpio_is_valid(max98520->reset_gpio)) { > + ret = devm_gpio_request(&i2c->dev, max98520->reset_gpio, > + "MAX98520_RESET"); You should use the gpiod APIs for new code, not the legacy GPIO interface. This GPIO wasn't mentioned in the DT bindings but should have been described there. > + if (ret) { > + dev_err(&i2c->dev, "%s: Failed to request gpio %d\n", > + __func__, max98520->reset_gpio); > + return -EINVAL; > + } > + gpio_direction_output(max98520->reset_gpio, 0); > + msleep(50); > + gpio_direction_output(max98520->reset_gpio, 1); > + msleep(20); > + } Shouldn't the disable/enable of the reset GPIO be in the reset function? [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver @ 2021-10-18 12:38 ` Mark Brown 0 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2021-10-18 12:38 UTC (permalink / raw) To: George Song Cc: lgirdwood, robh+dt, alsa-devel, devicetree, linux-kernel, george.song, ryans.lee, steves.lee [-- Attachment #1: Type: text/plain, Size: 3298 bytes --] On Mon, Oct 18, 2021 at 05:35:54PM +0900, George Song wrote: > + case SND_SOC_DAPM_POST_PMD: > + dev_dbg(component->dev, " AMP OFF\n"); > + > + regmap_write(max98520->regmap, MAX98520_R210F_GLOBAL_EN, 0); > + usleep_range(30000, 31000); > + max98520->tdm_mode = false; > + break; Why would stopping the DAC put us out of TDM mode? Not that I can see anything which ever sets tdm_mode to anything other than false or checks the value... > +static const struct snd_soc_dapm_widget max98520_dapm_widgets[] = { > + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", > + MAX98520_R209F_AMP_EN, 0, 0, max98520_dac_event, > + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), I can't help think that the global enable ought to be a _SUPPLY widget, it would get enabled before the DAC rather than after it but it's not clear that the ordering is critical here. > +static DECLARE_TLV_DB_SCALE(max98520_digital_tlv, -6300, 50, 1); > +static const DECLARE_TLV_DB_RANGE(max98520_spk_tlv, > + 0, 5, TLV_DB_SCALE_ITEM(600, 300, 0), > +); Why is _digital_tlv not const? It's also a bit weird that _spk_tlv is a range with one entry not a scale. > + count = 0; > + while (count < 3) { > + usleep_range(10000, 11000); > + /* Software Reset Verification */ > + ret = regmap_read(max98520->regmap, MAX98520_R21FF_REVISION_ID, ®); > + if (!ret) { > + dev_info(dev, "Reset completed (retry:%d)\n", count); > + return; > + } > + count++; Does this really need to be logged? > + /* Software Reset */ > + max98520_reset(max98520, component->dev); > + usleep_range(30000, 31000); Shouldn't that delay be in the reset routine? Perhaps between the attempts to read the ID register? > + /* L/R mix configuration */ > + regmap_write(max98520->regmap, MAX98520_R2043_PCM_RX_SRC1, 0x2); > + > + regmap_write(max98520->regmap, MAX98520_R2044_PCM_RX_SRC2, 0x10); These should be exposed to the user, not hard coded - different systems may need different configurations. > + /* Disable Speaker Safe Mode */ > + regmap_update_bits(max98520->regmap, > + MAX98520_R2092_AMP_DSP_CFG, MAX98520_SPK_SAFE_EN_MASK, 0); This seems like something that should be left as is by default given the name (or forced on if it were disabled by default)? > + /* Hard coded values for the experiments */ > + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x54); > + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x4d); > + regmap_write(max98520->regmap, MAX98520_R2161_BOOST_TM1, 0x2); > + regmap_write(max98520->regmap, MAX98520_R2095_AMP_CFG, 0xc8); This doesn't seem suitable for upstream. > + /* Power on device */ > + if (gpio_is_valid(max98520->reset_gpio)) { > + ret = devm_gpio_request(&i2c->dev, max98520->reset_gpio, > + "MAX98520_RESET"); You should use the gpiod APIs for new code, not the legacy GPIO interface. This GPIO wasn't mentioned in the DT bindings but should have been described there. > + if (ret) { > + dev_err(&i2c->dev, "%s: Failed to request gpio %d\n", > + __func__, max98520->reset_gpio); > + return -EINVAL; > + } > + gpio_direction_output(max98520->reset_gpio, 0); > + msleep(50); > + gpio_direction_output(max98520->reset_gpio, 1); > + msleep(20); > + } Shouldn't the disable/enable of the reset GPIO be in the reset function? [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: [EXTERNAL] Re: [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver 2021-10-18 12:38 ` Mark Brown @ 2021-10-19 7:57 ` George Song -1 siblings, 0 replies; 14+ messages in thread From: George Song @ 2021-10-19 7:57 UTC (permalink / raw) To: Mark Brown Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Steve Lee, Ryan Lee, george.song@analog.com, lgirdwood@gmail.com, linux-kernel@vger.kernel.org, robh+dt@kernel.org > On Mon, Oct 18, 2021 at 05:35:54PM +0900, George Song wrote: > > > + case SND_SOC_DAPM_POST_PMD: > > + dev_dbg(component->dev, " AMP OFF\n"); > > + > > + regmap_write(max98520->regmap, MAX98520_R210F_GLOBAL_EN, 0); > > + usleep_range(30000, 31000); > > + max98520->tdm_mode = false; > > + break; > > Why would stopping the DAC put us out of TDM mode? Not that I can see > anything which ever sets tdm_mode to anything other than false or checks > the value... It will be removed tdm_mode to false line. > > > +static const struct snd_soc_dapm_widget max98520_dapm_widgets[] = { > > + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", > > + MAX98520_R209F_AMP_EN, 0, 0, max98520_dac_event, > > + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), > > I can't help think that the global enable ought to be a _SUPPLY widget, it > would get enabled before the DAC rather than after it but it's not clear > that the ordering is critical here. It will be modified SND_SOC_NOPM instead of MAX98520_R209F_AMP_EN. > > > +static DECLARE_TLV_DB_SCALE(max98520_digital_tlv, -6300, 50, 1); > > +static const DECLARE_TLV_DB_RANGE(max98520_spk_tlv, > > + 0, 5, TLV_DB_SCALE_ITEM(600, 300, 0), ); > > Why is _digital_tlv not const? It's also a bit weird that _spk_tlv is a > range with one entry not a scale. It will be added const casting in front of DECLARE_TLV_DB_SCALE. > > > + count = 0; > > + while (count < 3) { > > + usleep_range(10000, 11000); > > + /* Software Reset Verification */ > > + ret = regmap_read(max98520->regmap, > MAX98520_R21FF_REVISION_ID, ®); > > + if (!ret) { > > + dev_info(dev, "Reset completed (retry:%d)\n", count); > > + return; > > + } > > + count++; > > Does this really need to be logged? It will be removed for logging regarding reset completed. > > > + /* Software Reset */ > > + max98520_reset(max98520, component->dev); > > + usleep_range(30000, 31000); > > Shouldn't that delay be in the reset routine? Perhaps between the > attempts to read the ID register? It will be removed 30ms sleep after reset function. > > > + /* L/R mix configuration */ > > + regmap_write(max98520->regmap, MAX98520_R2043_PCM_RX_SRC1, 0x2); > > + > > + regmap_write(max98520->regmap, MAX98520_R2044_PCM_RX_SRC2, 0x10); > > These should be exposed to the user, not hard coded - different systems > may need different configurations. It`s already exposed for 2043 register which is regarding mono mixer for "DAI Sel Mux" It will be exposed for 2044 register which is regarding pcm input channel selection to dapm mixer. > > > + /* Disable Speaker Safe Mode */ > > + regmap_update_bits(max98520->regmap, > > + MAX98520_R2092_AMP_DSP_CFG, > MAX98520_SPK_SAFE_EN_MASK, 0); > > This seems like something that should be left as is by default given the > name (or forced on if it were disabled by default)? It will be removed to be left as is by default given the name. > > > + /* Hard coded values for the experiments */ > > + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x54); > > + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x4d); > > + regmap_write(max98520->regmap, MAX98520_R2161_BOOST_TM1, 0x2); > > + regmap_write(max98520->regmap, MAX98520_R2095_AMP_CFG, 0xc8); > > This doesn't seem suitable for upstream. They will be removed. > > > + /* Power on device */ > > + if (gpio_is_valid(max98520->reset_gpio)) { > > + ret = devm_gpio_request(&i2c->dev, max98520->reset_gpio, > > + "MAX98520_RESET"); > > You should use the gpiod APIs for new code, not the legacy GPIO interface. > This GPIO wasn't mentioned in the DT bindings but should have been > described there. It will be modified to gpiod APIs like devm_gpiod_get_optional for getting reset_gpio (struct gpio_desc *reset_gpio). > > > + if (ret) { > > + dev_err(&i2c->dev, "%s: Failed to request gpio %d\n", > > + __func__, max98520->reset_gpio); > > + return -EINVAL; > > + } > > + gpio_direction_output(max98520->reset_gpio, 0); > > + msleep(50); > > + gpio_direction_output(max98520->reset_gpio, 1); > > + msleep(20); > > + } > > Shouldn't the disable/enable of the reset GPIO be in the reset function? It will be modified to gpiod APIs like gpiod_set_value_cansleep function instead of gpio_direction_output. ^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: [EXTERNAL] Re: [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver @ 2021-10-19 7:57 ` George Song 0 siblings, 0 replies; 14+ messages in thread From: George Song @ 2021-10-19 7:57 UTC (permalink / raw) To: Mark Brown Cc: lgirdwood@gmail.com, robh+dt@kernel.org, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, george.song@analog.com, Ryan Lee, Steve Lee > On Mon, Oct 18, 2021 at 05:35:54PM +0900, George Song wrote: > > > + case SND_SOC_DAPM_POST_PMD: > > + dev_dbg(component->dev, " AMP OFF\n"); > > + > > + regmap_write(max98520->regmap, MAX98520_R210F_GLOBAL_EN, 0); > > + usleep_range(30000, 31000); > > + max98520->tdm_mode = false; > > + break; > > Why would stopping the DAC put us out of TDM mode? Not that I can see > anything which ever sets tdm_mode to anything other than false or checks > the value... It will be removed tdm_mode to false line. > > > +static const struct snd_soc_dapm_widget max98520_dapm_widgets[] = { > > + SND_SOC_DAPM_DAC_E("Amp Enable", "HiFi Playback", > > + MAX98520_R209F_AMP_EN, 0, 0, max98520_dac_event, > > + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), > > I can't help think that the global enable ought to be a _SUPPLY widget, it > would get enabled before the DAC rather than after it but it's not clear > that the ordering is critical here. It will be modified SND_SOC_NOPM instead of MAX98520_R209F_AMP_EN. > > > +static DECLARE_TLV_DB_SCALE(max98520_digital_tlv, -6300, 50, 1); > > +static const DECLARE_TLV_DB_RANGE(max98520_spk_tlv, > > + 0, 5, TLV_DB_SCALE_ITEM(600, 300, 0), ); > > Why is _digital_tlv not const? It's also a bit weird that _spk_tlv is a > range with one entry not a scale. It will be added const casting in front of DECLARE_TLV_DB_SCALE. > > > + count = 0; > > + while (count < 3) { > > + usleep_range(10000, 11000); > > + /* Software Reset Verification */ > > + ret = regmap_read(max98520->regmap, > MAX98520_R21FF_REVISION_ID, ®); > > + if (!ret) { > > + dev_info(dev, "Reset completed (retry:%d)\n", count); > > + return; > > + } > > + count++; > > Does this really need to be logged? It will be removed for logging regarding reset completed. > > > + /* Software Reset */ > > + max98520_reset(max98520, component->dev); > > + usleep_range(30000, 31000); > > Shouldn't that delay be in the reset routine? Perhaps between the > attempts to read the ID register? It will be removed 30ms sleep after reset function. > > > + /* L/R mix configuration */ > > + regmap_write(max98520->regmap, MAX98520_R2043_PCM_RX_SRC1, 0x2); > > + > > + regmap_write(max98520->regmap, MAX98520_R2044_PCM_RX_SRC2, 0x10); > > These should be exposed to the user, not hard coded - different systems > may need different configurations. It`s already exposed for 2043 register which is regarding mono mixer for "DAI Sel Mux" It will be exposed for 2044 register which is regarding pcm input channel selection to dapm mixer. > > > + /* Disable Speaker Safe Mode */ > > + regmap_update_bits(max98520->regmap, > > + MAX98520_R2092_AMP_DSP_CFG, > MAX98520_SPK_SAFE_EN_MASK, 0); > > This seems like something that should be left as is by default given the > name (or forced on if it were disabled by default)? It will be removed to be left as is by default given the name. > > > + /* Hard coded values for the experiments */ > > + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x54); > > + regmap_write(max98520->regmap, MAX98520_R21FF_REVISION_ID, 0x4d); > > + regmap_write(max98520->regmap, MAX98520_R2161_BOOST_TM1, 0x2); > > + regmap_write(max98520->regmap, MAX98520_R2095_AMP_CFG, 0xc8); > > This doesn't seem suitable for upstream. They will be removed. > > > + /* Power on device */ > > + if (gpio_is_valid(max98520->reset_gpio)) { > > + ret = devm_gpio_request(&i2c->dev, max98520->reset_gpio, > > + "MAX98520_RESET"); > > You should use the gpiod APIs for new code, not the legacy GPIO interface. > This GPIO wasn't mentioned in the DT bindings but should have been > described there. It will be modified to gpiod APIs like devm_gpiod_get_optional for getting reset_gpio (struct gpio_desc *reset_gpio). > > > + if (ret) { > > + dev_err(&i2c->dev, "%s: Failed to request gpio %d\n", > > + __func__, max98520->reset_gpio); > > + return -EINVAL; > > + } > > + gpio_direction_output(max98520->reset_gpio, 0); > > + msleep(50); > > + gpio_direction_output(max98520->reset_gpio, 1); > > + msleep(20); > > + } > > Shouldn't the disable/enable of the reset GPIO be in the reset function? It will be modified to gpiod APIs like gpiod_set_value_cansleep function instead of gpio_direction_output. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [EXTERNAL] Re: [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver 2021-10-19 7:57 ` George Song @ 2021-10-19 11:59 ` Mark Brown -1 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2021-10-19 11:59 UTC (permalink / raw) To: George Song Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Steve Lee, Ryan Lee, george.song@analog.com, lgirdwood@gmail.com, linux-kernel@vger.kernel.org, robh+dt@kernel.org [-- Attachment #1: Type: text/plain, Size: 853 bytes --] On Tue, Oct 19, 2021 at 07:57:26AM +0000, George Song wrote: > > > + /* L/R mix configuration */ > > > + regmap_write(max98520->regmap, MAX98520_R2043_PCM_RX_SRC1, 0x2); > > > + > > > + regmap_write(max98520->regmap, MAX98520_R2044_PCM_RX_SRC2, 0x10); > > > > These should be exposed to the user, not hard coded - different systems > > may need different configurations. > It`s already exposed for 2043 register which is regarding mono mixer for "DAI Sel Mux" > It will be exposed for 2044 register which is regarding pcm input channel selection to dapm mixer. Then leave the values at the defaults and let the user select what's sensible for their system. Please fix your mail client to word wrap within paragraphs at something substantially less than 80 columns. Doing this makes your messages much easier to read and reply to. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [EXTERNAL] Re: [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver @ 2021-10-19 11:59 ` Mark Brown 0 siblings, 0 replies; 14+ messages in thread From: Mark Brown @ 2021-10-19 11:59 UTC (permalink / raw) To: George Song Cc: lgirdwood@gmail.com, robh+dt@kernel.org, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, george.song@analog.com, Ryan Lee, Steve Lee [-- Attachment #1: Type: text/plain, Size: 853 bytes --] On Tue, Oct 19, 2021 at 07:57:26AM +0000, George Song wrote: > > > + /* L/R mix configuration */ > > > + regmap_write(max98520->regmap, MAX98520_R2043_PCM_RX_SRC1, 0x2); > > > + > > > + regmap_write(max98520->regmap, MAX98520_R2044_PCM_RX_SRC2, 0x10); > > > > These should be exposed to the user, not hard coded - different systems > > may need different configurations. > It`s already exposed for 2043 register which is regarding mono mixer for "DAI Sel Mux" > It will be exposed for 2044 register which is regarding pcm input channel selection to dapm mixer. Then leave the values at the defaults and let the user select what's sensible for their system. Please fix your mail client to word wrap within paragraphs at something substantially less than 80 columns. Doing this makes your messages much easier to read and reply to. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: [EXTERNAL] Re: [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver 2021-10-19 11:59 ` Mark Brown @ 2021-10-20 5:06 ` George Song -1 siblings, 0 replies; 14+ messages in thread From: George Song @ 2021-10-20 5:06 UTC (permalink / raw) To: Mark Brown Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, Steve Lee, Ryan Lee, george.song@analog.com, lgirdwood@gmail.com, linux-kernel@vger.kernel.org, robh+dt@kernel.org > On Tue, Oct 19, 2021 at 07:57:26AM +0000, George Song wrote: > > > > > + /* L/R mix configuration */ > > > > + regmap_write(max98520->regmap, > MAX98520_R2043_PCM_RX_SRC1, 0x2); > > > > + > > > > + regmap_write(max98520->regmap, > MAX98520_R2044_PCM_RX_SRC2, > > > > +0x10); > > > > > > These should be exposed to the user, not hard coded - different > > > systems may need different configurations. > > It`s already exposed for 2043 register which is regarding mono > mixer for "DAI Sel Mux" > > It will be exposed for 2044 register which is regarding pcm input > channel selection to dapm mixer. > > Then leave the values at the defaults and let the user select what's > sensible for their system. It will be left the default value in probe function and described mixer/widget comment > > Please fix your mail client to word wrap within paragraphs at > something substantially less than 80 columns. Doing this makes your > messages much easier to read and reply to. OK I see. ^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: [EXTERNAL] Re: [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver @ 2021-10-20 5:06 ` George Song 0 siblings, 0 replies; 14+ messages in thread From: George Song @ 2021-10-20 5:06 UTC (permalink / raw) To: Mark Brown Cc: lgirdwood@gmail.com, robh+dt@kernel.org, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, george.song@analog.com, Ryan Lee, Steve Lee > On Tue, Oct 19, 2021 at 07:57:26AM +0000, George Song wrote: > > > > > + /* L/R mix configuration */ > > > > + regmap_write(max98520->regmap, > MAX98520_R2043_PCM_RX_SRC1, 0x2); > > > > + > > > > + regmap_write(max98520->regmap, > MAX98520_R2044_PCM_RX_SRC2, > > > > +0x10); > > > > > > These should be exposed to the user, not hard coded - different > > > systems may need different configurations. > > It`s already exposed for 2043 register which is regarding mono > mixer for "DAI Sel Mux" > > It will be exposed for 2044 register which is regarding pcm input > channel selection to dapm mixer. > > Then leave the values at the defaults and let the user select what's > sensible for their system. It will be left the default value in probe function and described mixer/widget comment > > Please fix your mail client to word wrap within paragraphs at > something substantially less than 80 columns. Doing this makes your > messages much easier to read and reply to. OK I see. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [v3 1/2] ASoC: dt-bindings: max98520: add initial bindings 2021-10-18 8:35 ` George Song @ 2021-10-18 19:49 ` Rob Herring -1 siblings, 0 replies; 14+ messages in thread From: Rob Herring @ 2021-10-18 19:49 UTC (permalink / raw) To: George Song Cc: devicetree, alsa-devel, steves.lee, ryans.lee, george.song, lgirdwood, robh+dt, linux-kernel, broonie On Mon, 18 Oct 2021 17:35:53 +0900, George Song wrote: > add initial bindings for max98520 audio amplifier > > Signed-off-by: George Song <george.song@maximintegrated.com> > --- > .../bindings/sound/maxim,max98520.yaml | 36 +++++++++++++++++++ > 1 file changed, 36 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98520.yaml > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [v3 1/2] ASoC: dt-bindings: max98520: add initial bindings @ 2021-10-18 19:49 ` Rob Herring 0 siblings, 0 replies; 14+ messages in thread From: Rob Herring @ 2021-10-18 19:49 UTC (permalink / raw) To: George Song Cc: devicetree, alsa-devel, steves.lee, broonie, george.song, robh+dt, ryans.lee, lgirdwood, linux-kernel On Mon, 18 Oct 2021 17:35:53 +0900, George Song wrote: > add initial bindings for max98520 audio amplifier > > Signed-off-by: George Song <george.song@maximintegrated.com> > --- > .../bindings/sound/maxim,max98520.yaml | 36 +++++++++++++++++++ > 1 file changed, 36 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/maxim,max98520.yaml > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2021-10-20 5:07 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-10-18 8:35 [v3 1/2] ASoC: dt-bindings: max98520: add initial bindings George Song 2021-10-18 8:35 ` George Song 2021-10-18 8:35 ` [v3 2/2] ASoC: max98520: add max98520 audio amplifier driver George Song 2021-10-18 8:35 ` George Song 2021-10-18 12:38 ` Mark Brown 2021-10-18 12:38 ` Mark Brown 2021-10-19 7:57 ` [EXTERNAL] " George Song 2021-10-19 7:57 ` George Song 2021-10-19 11:59 ` Mark Brown 2021-10-19 11:59 ` Mark Brown 2021-10-20 5:06 ` George Song 2021-10-20 5:06 ` George Song 2021-10-18 19:49 ` [v3 1/2] ASoC: dt-bindings: max98520: add initial bindings Rob Herring 2021-10-18 19:49 ` Rob Herring
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.