All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Maíra Canal" <maira.canal@usp.br>
To: hongxing.zhu@nxp.com, l.stach@pengutronix.de
Cc: lorenzo.pieralisi@arm.com, robh@kernel.org, kw@linux.com,
	bhelgaas@google.com, helgaas@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] PCI: imx6: Replace legacy gpio interface for gpiod interface
Date: Tue, 19 Oct 2021 20:56:47 -0300	[thread overview]
Message-ID: <YW9bPy5IHzuROhrl@fedora> (raw)

Considering the current transition of the GPIO subsystem, remove all
dependencies of the legacy GPIO interface (linux/gpio.h and linux
/of_gpio.h) and replace it with the descriptor-based GPIO approach.

Signed-off-by: Maíra Canal <maira.canal@usp.br>
---
V1 -> V2: Rewrite commit log and subject line to match PCI subsystem standard
---
 drivers/pci/controller/dwc/pci-imx6.c | 31 ++++++++++-----------------
 1 file changed, 11 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 80fc98acf097..e5ee54e37d05 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -11,13 +11,12 @@
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 #include <linux/pci.h>
@@ -63,7 +62,7 @@ struct imx6_pcie_drvdata {
 
 struct imx6_pcie {
 	struct dw_pcie		*pci;
-	int			reset_gpio;
+	struct gpio_desc    *reset_gpio;
 	bool			gpio_active_high;
 	struct clk		*pcie_bus;
 	struct clk		*pcie_phy;
@@ -526,11 +525,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	usleep_range(200, 500);
 
 	/* Some boards don't have PCIe reset GPIO. */
-	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
-		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
+	if (imx6_pcie->reset_gpio) {
+		gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
 					imx6_pcie->gpio_active_high);
 		msleep(100);
-		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
+		gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
 					!imx6_pcie->gpio_active_high);
 	}
 
@@ -1025,22 +1024,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 		return PTR_ERR(pci->dbi_base);
 
 	/* Fetch GPIOs */
-	imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
 	imx6_pcie->gpio_active_high = of_property_read_bool(node,
 						"reset-gpio-active-high");
-	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
-		ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
-				imx6_pcie->gpio_active_high ?
-					GPIOF_OUT_INIT_HIGH :
-					GPIOF_OUT_INIT_LOW,
-				"PCIe reset");
-		if (ret) {
-			dev_err(dev, "unable to get reset gpio\n");
-			return ret;
-		}
-	} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
-		return imx6_pcie->reset_gpio;
-	}
+	imx6_pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+			imx6_pcie->gpio_active_high ?  GPIOD_OUT_HIGH :
+				GPIOD_OUT_LOW);
+	if (IS_ERR(imx6_pcie->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpio),
+					  "unable to get reset gpio\n");
 
 	/* Fetch clocks */
 	imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
-- 
2.31.1


WARNING: multiple messages have this Message-ID (diff)
From: "Maíra Canal" <maira.canal@usp.br>
To: hongxing.zhu@nxp.com, l.stach@pengutronix.de
Cc: lorenzo.pieralisi@arm.com, robh@kernel.org, kw@linux.com,
	bhelgaas@google.com, helgaas@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] PCI: imx6: Replace legacy gpio interface for gpiod interface
Date: Tue, 19 Oct 2021 20:56:47 -0300	[thread overview]
Message-ID: <YW9bPy5IHzuROhrl@fedora> (raw)

Considering the current transition of the GPIO subsystem, remove all
dependencies of the legacy GPIO interface (linux/gpio.h and linux
/of_gpio.h) and replace it with the descriptor-based GPIO approach.

Signed-off-by: Maíra Canal <maira.canal@usp.br>
---
V1 -> V2: Rewrite commit log and subject line to match PCI subsystem standard
---
 drivers/pci/controller/dwc/pci-imx6.c | 31 ++++++++++-----------------
 1 file changed, 11 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 80fc98acf097..e5ee54e37d05 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -11,13 +11,12 @@
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 #include <linux/pci.h>
@@ -63,7 +62,7 @@ struct imx6_pcie_drvdata {
 
 struct imx6_pcie {
 	struct dw_pcie		*pci;
-	int			reset_gpio;
+	struct gpio_desc    *reset_gpio;
 	bool			gpio_active_high;
 	struct clk		*pcie_bus;
 	struct clk		*pcie_phy;
@@ -526,11 +525,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 	usleep_range(200, 500);
 
 	/* Some boards don't have PCIe reset GPIO. */
-	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
-		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
+	if (imx6_pcie->reset_gpio) {
+		gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
 					imx6_pcie->gpio_active_high);
 		msleep(100);
-		gpio_set_value_cansleep(imx6_pcie->reset_gpio,
+		gpiod_set_value_cansleep(imx6_pcie->reset_gpio,
 					!imx6_pcie->gpio_active_high);
 	}
 
@@ -1025,22 +1024,14 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 		return PTR_ERR(pci->dbi_base);
 
 	/* Fetch GPIOs */
-	imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
 	imx6_pcie->gpio_active_high = of_property_read_bool(node,
 						"reset-gpio-active-high");
-	if (gpio_is_valid(imx6_pcie->reset_gpio)) {
-		ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
-				imx6_pcie->gpio_active_high ?
-					GPIOF_OUT_INIT_HIGH :
-					GPIOF_OUT_INIT_LOW,
-				"PCIe reset");
-		if (ret) {
-			dev_err(dev, "unable to get reset gpio\n");
-			return ret;
-		}
-	} else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
-		return imx6_pcie->reset_gpio;
-	}
+	imx6_pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+			imx6_pcie->gpio_active_high ?  GPIOD_OUT_HIGH :
+				GPIOD_OUT_LOW);
+	if (IS_ERR(imx6_pcie->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpio),
+					  "unable to get reset gpio\n");
 
 	/* Fetch clocks */
 	imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-10-19 23:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-19 23:56 Maíra Canal [this message]
2021-10-19 23:56 ` [PATCH v2] PCI: imx6: Replace legacy gpio interface for gpiod interface Maíra Canal
2021-10-20 14:58 ` Bjorn Helgaas
2021-10-20 14:58   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YW9bPy5IHzuROhrl@fedora \
    --to=maira.canal@usp.br \
    --cc=bhelgaas@google.com \
    --cc=festevam@gmail.com \
    --cc=helgaas@kernel.org \
    --cc=hongxing.zhu@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=kw@linux.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.