All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Samuel Holland <samuel@sholland.org>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-pm@vger.kernel.org, linux-sunxi@lists.linux.dev,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/6] dt-bindings: arm: sunxi: Expand MBUS binding
Date: Mon, 11 Oct 2021 20:10:03 -0500	[thread overview]
Message-ID: <YWTga7XwvWAXoluU@robh.at.kernel.org> (raw)
In-Reply-To: <20211004012739.39053-3-samuel@sholland.org>

On Sun, Oct 03, 2021 at 08:27:35PM -0500, Samuel Holland wrote:
> The MBUS provides more than address translation and bandwidth control.
> It also provides a PMU to measure bandwidth usage by certain masters,
> and it provides notification via IRQ when they are active or idle.
> 
> The MBUS is also tightly integrated with the DRAM controller to provide
> a Memory Dynamic Frequency Scaling (MDFS) feature. In view of this, the
> MBUS binding needs to represent the hardware resources needed for MDFS,
> which include the clocks and MMIO range of the adjacent DRAM controller.
> 
> Add the additional resources for the H3 and A64 compatibles, and a new
> example showing how they are used.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
>  .../arm/sunxi/allwinner,sun4i-a10-mbus.yaml   | 75 ++++++++++++++++++-
>  1 file changed, 72 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
> index e713a6fe4cf7..c1fb404d2fb3 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
> +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
> @@ -33,10 +33,33 @@ properties:
>        - allwinner,sun50i-a64-mbus
>  
>    reg:
> -    maxItems: 1
> +    minItems: 1
> +    items:
> +      - description: MBUS interconnect/bandwidth/PMU registers
> +      - description: DRAM controller/PHY registers
> +
> +  reg-names:
> +    items:
> +      - const: "mbus"
> +      - const: "dram"

Don't need quotes.

Is it your intention that reg-names has to have 2 entries. Usually we 
aren't that strict and 1 would be allowed (when reg has 1).

>  
>    clocks:
> +    minItems: 1
> +    items:
> +      - description: MBUS interconnect module clock
> +      - description: DRAM controller/PHY module clock
> +      - description: Register bus clock, shared by MBUS and DRAM
> +
> +  clock-names:
> +    items:
> +      - const: "mbus"
> +      - const: "dram"
> +      - const: "bus"
> +
> +  interrupts:
>      maxItems: 1
> +    description:
> +      MBUS PMU activity interrupt.
>  
>    dma-ranges:
>      description:
> @@ -53,13 +76,42 @@ required:
>    - clocks
>    - dma-ranges
>  
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - allwinner,sun8i-h3-mbus
> +          - allwinner,sun50i-a64-mbus
> +
> +then:
> +  properties:
> +    reg:
> +      minItems: 2
> +
> +    clocks:
> +      minItems: 3
> +
> +  required:
> +    - reg-names
> +    - clock-names
> +
> +else:
> +  properties:
> +    reg:
> +      maxItems: 1
> +
> +    clocks:
> +      maxItems: 1
> +
>  additionalProperties: false
>  
>  examples:
>    - |
> -    #include <dt-bindings/clock/sun5i-ccu.h>
> +    #include <dt-bindings/clock/sun50i-a64-ccu.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>  
> -    mbus: dram-controller@1c01000 {
> +    dram-controller@1c01000 {
>          compatible = "allwinner,sun5i-a13-mbus";
>          reg = <0x01c01000 0x1000>;
>          clocks = <&ccu CLK_MBUS>;
> @@ -69,4 +121,21 @@ examples:
>          #interconnect-cells = <1>;
>      };
>  
> +  - |
> +    dram-controller@1c62000 {
> +        compatible = "allwinner,sun50i-a64-mbus";
> +        reg = <0x01c62000 0x1000>,
> +              <0x01c63000 0x1000>;
> +        reg-names = "mbus", "dram";
> +        clocks = <&ccu CLK_MBUS>,
> +                 <&ccu CLK_DRAM>,
> +                 <&ccu CLK_BUS_DRAM>;
> +        clock-names = "mbus", "dram", "bus";
> +        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        dma-ranges = <0x00000000 0x40000000 0xc0000000>;
> +        #interconnect-cells = <1>;
> +    };
> +
>  ...
> -- 
> 2.32.0
> 
> 

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Samuel Holland <samuel@sholland.org>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-pm@vger.kernel.org, linux-sunxi@lists.linux.dev,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/6] dt-bindings: arm: sunxi: Expand MBUS binding
Date: Mon, 11 Oct 2021 20:10:03 -0500	[thread overview]
Message-ID: <YWTga7XwvWAXoluU@robh.at.kernel.org> (raw)
In-Reply-To: <20211004012739.39053-3-samuel@sholland.org>

On Sun, Oct 03, 2021 at 08:27:35PM -0500, Samuel Holland wrote:
> The MBUS provides more than address translation and bandwidth control.
> It also provides a PMU to measure bandwidth usage by certain masters,
> and it provides notification via IRQ when they are active or idle.
> 
> The MBUS is also tightly integrated with the DRAM controller to provide
> a Memory Dynamic Frequency Scaling (MDFS) feature. In view of this, the
> MBUS binding needs to represent the hardware resources needed for MDFS,
> which include the clocks and MMIO range of the adjacent DRAM controller.
> 
> Add the additional resources for the H3 and A64 compatibles, and a new
> example showing how they are used.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
>  .../arm/sunxi/allwinner,sun4i-a10-mbus.yaml   | 75 ++++++++++++++++++-
>  1 file changed, 72 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
> index e713a6fe4cf7..c1fb404d2fb3 100644
> --- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
> +++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
> @@ -33,10 +33,33 @@ properties:
>        - allwinner,sun50i-a64-mbus
>  
>    reg:
> -    maxItems: 1
> +    minItems: 1
> +    items:
> +      - description: MBUS interconnect/bandwidth/PMU registers
> +      - description: DRAM controller/PHY registers
> +
> +  reg-names:
> +    items:
> +      - const: "mbus"
> +      - const: "dram"

Don't need quotes.

Is it your intention that reg-names has to have 2 entries. Usually we 
aren't that strict and 1 would be allowed (when reg has 1).

>  
>    clocks:
> +    minItems: 1
> +    items:
> +      - description: MBUS interconnect module clock
> +      - description: DRAM controller/PHY module clock
> +      - description: Register bus clock, shared by MBUS and DRAM
> +
> +  clock-names:
> +    items:
> +      - const: "mbus"
> +      - const: "dram"
> +      - const: "bus"
> +
> +  interrupts:
>      maxItems: 1
> +    description:
> +      MBUS PMU activity interrupt.
>  
>    dma-ranges:
>      description:
> @@ -53,13 +76,42 @@ required:
>    - clocks
>    - dma-ranges
>  
> +if:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - allwinner,sun8i-h3-mbus
> +          - allwinner,sun50i-a64-mbus
> +
> +then:
> +  properties:
> +    reg:
> +      minItems: 2
> +
> +    clocks:
> +      minItems: 3
> +
> +  required:
> +    - reg-names
> +    - clock-names
> +
> +else:
> +  properties:
> +    reg:
> +      maxItems: 1
> +
> +    clocks:
> +      maxItems: 1
> +
>  additionalProperties: false
>  
>  examples:
>    - |
> -    #include <dt-bindings/clock/sun5i-ccu.h>
> +    #include <dt-bindings/clock/sun50i-a64-ccu.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>  
> -    mbus: dram-controller@1c01000 {
> +    dram-controller@1c01000 {
>          compatible = "allwinner,sun5i-a13-mbus";
>          reg = <0x01c01000 0x1000>;
>          clocks = <&ccu CLK_MBUS>;
> @@ -69,4 +121,21 @@ examples:
>          #interconnect-cells = <1>;
>      };
>  
> +  - |
> +    dram-controller@1c62000 {
> +        compatible = "allwinner,sun50i-a64-mbus";
> +        reg = <0x01c62000 0x1000>,
> +              <0x01c63000 0x1000>;
> +        reg-names = "mbus", "dram";
> +        clocks = <&ccu CLK_MBUS>,
> +                 <&ccu CLK_DRAM>,
> +                 <&ccu CLK_BUS_DRAM>;
> +        clock-names = "mbus", "dram", "bus";
> +        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        dma-ranges = <0x00000000 0x40000000 0xc0000000>;
> +        #interconnect-cells = <1>;
> +    };
> +
>  ...
> -- 
> 2.32.0
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-10-12  1:10 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-04  1:27 [PATCH v2 0/6] DRAM devfreq support for Allwinner A64/H5 Samuel Holland
2021-10-04  1:27 ` Samuel Holland
2021-10-04  1:27 ` [PATCH v2 1/6] dt-bindings: clock: sunxi: Export CLK_DRAM for devfreq Samuel Holland
2021-10-04  1:27   ` Samuel Holland
2021-10-12  1:07   ` Rob Herring
2021-10-12  1:07     ` Rob Herring
2021-10-15  1:40   ` Chanwoo Choi
2021-10-15  1:40     ` Chanwoo Choi
2021-10-04  1:27 ` [PATCH v2 2/6] dt-bindings: arm: sunxi: Expand MBUS binding Samuel Holland
2021-10-04  1:27   ` Samuel Holland
2021-10-12  1:10   ` Rob Herring [this message]
2021-10-12  1:10     ` Rob Herring
2021-10-15  8:37   ` Chanwoo Choi
2021-10-15  8:37     ` Chanwoo Choi
2021-10-04  1:27 ` [PATCH v2 3/6] dt-bindings: arm: sunxi: Add H5 MBUS compatible Samuel Holland
2021-10-04  1:27   ` Samuel Holland
2021-10-04 12:21   ` Rob Herring
2021-10-04 12:21     ` Rob Herring
2021-10-14 16:33   ` Rob Herring
2021-10-14 16:33     ` Rob Herring
2021-10-04  1:27 ` [PATCH v2 4/6] ARM: dts: sunxi: h3/h5: Update MBUS node Samuel Holland
2021-10-04  1:27   ` Samuel Holland
2021-10-15  8:29   ` Chanwoo Choi
2021-10-15  8:29     ` Chanwoo Choi
2021-10-04  1:27 ` [PATCH v2 5/6] arm64: dts: allwinner: a64: " Samuel Holland
2021-10-04  1:27   ` Samuel Holland
2021-10-15  8:29   ` Chanwoo Choi
2021-10-15  8:29     ` Chanwoo Choi
2021-10-04  1:27 ` [PATCH v2 6/6] PM / devfreq: Add a driver for the sun8i/sun50i MBUS Samuel Holland
2021-10-04  1:27   ` Samuel Holland
2021-10-15  8:28   ` Chanwoo Choi
2021-10-15  8:28     ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YWTga7XwvWAXoluU@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=samuel@sholland.org \
    --cc=sboyd@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.