From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Maxime Ripard <maxime@cerno.tech>
Cc: Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>,
Daniel Vetter <daniel.vetter@intel.com>,
David Airlie <airlied@linux.ie>, Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 1/2] dt-bindings: display: Turn lvds.yaml into a generic schema
Date: Sat, 20 Nov 2021 00:46:33 +0200 [thread overview]
Message-ID: <YZgpSWVXjKr9secH@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20211116143503.385807-1-maxime@cerno.tech>
Hi Maxime,
Thank you for the patch.
On Tue, Nov 16, 2021 at 03:35:02PM +0100, Maxime Ripard wrote:
> The lvds.yaml file so far was both defining the generic LVDS properties
> (such as data-mapping) that could be used for any LVDS sink, but also
> the panel-lvds binding.
>
> That last binding was to describe LVDS panels simple enough, and had a
> number of other bindings using it as a base to specialise it further.
>
> However, this situation makes it fairly hard to extend and reuse both
> the generic parts, and the panel-lvds itself.
>
> Let's remove the panel-lvds parts and leave only the generic LVDS
> properties.
>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
> .../display/panel/advantech,idk-1110wr.yaml | 17 ++++++++++-
> .../display/panel/innolux,ee101ia-01d.yaml | 21 +++++++++++++-
> .../bindings/display/panel/lvds.yaml | 29 +------------------
> .../display/panel/mitsubishi,aa104xd12.yaml | 17 ++++++++++-
> .../display/panel/mitsubishi,aa121td01.yaml | 17 ++++++++++-
> .../display/panel/sgd,gktw70sdae4se.yaml | 17 ++++++++++-
> 6 files changed, 85 insertions(+), 33 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
> index 93878c2cd370..f27cd2038636 100644
> --- a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
> @@ -11,13 +11,23 @@ maintainers:
> - Thierry Reding <thierry.reding@gmail.com>
>
> allOf:
> + - $ref: panel-common.yaml#
> - $ref: lvds.yaml#
>
> +select:
> + properties:
> + compatible:
> + contains:
> + const: advantech,idk-1110wr
> +
> + required:
> + - compatible
I've never encountered this before, what does it do ?
> +
> properties:
> compatible:
> items:
> - const: advantech,idk-1110wr
> - - {} # panel-lvds, but not listed here to avoid false select
> + - const: panel-lvds
>
> data-mapping:
> const: jeida-24
> @@ -35,6 +45,11 @@ additionalProperties: false
>
> required:
> - compatible
> + - data-mapping
> + - width-mm
> + - height-mm
> + - panel-timing
> + - port
>
> examples:
> - |+
> diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
> index a69681e724cb..6e06eecac14e 100644
> --- a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
> @@ -11,15 +11,26 @@ maintainers:
> - Thierry Reding <thierry.reding@gmail.com>
>
> allOf:
> + - $ref: panel-common.yaml#
> - $ref: lvds.yaml#
>
> +select:
> + properties:
> + compatible:
> + contains:
> + const: innolux,ee101ia-01d
> +
> + required:
> + - compatible
> +
> properties:
> compatible:
> items:
> - const: innolux,ee101ia-01d
> - - {} # panel-lvds, but not listed here to avoid false select
> + - const: panel-lvds
>
> backlight: true
> + data-mapping: true
> enable-gpios: true
> power-supply: true
> width-mm: true
> @@ -27,5 +38,13 @@ properties:
> panel-timing: true
> port: true
>
> +required:
> + - compatible
> + - data-mapping
> + - width-mm
> + - height-mm
> + - panel-timing
> + - port
> +
> additionalProperties: false
> ...
> diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml
> index 49460c9dceea..5281a75c8bb5 100644
> --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml
> @@ -4,7 +4,7 @@
> $id: http://devicetree.org/schemas/display/panel/lvds.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> -title: LVDS Display Panel
> +title: LVDS Display Common Properties
Maybe
title: LVDS Display Panel Common Properties
or do you foresee this being useful for non-panel LBDS sinks too ? In
that case the title is fine, but the file could be moved in the parent
directory.
I'm also wondering what we should do with the data-mapping and
data-mirror properties. For an LVDS panel they're fine at the device
level, but for an LVDS sink, they may be better placed at the port or
endpoint level.
>
> maintainers:
> - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> @@ -26,18 +26,7 @@ description: |+
> Device compatible with those specifications have been marketed under the
> FPD-Link and FlatLink brands.
>
> -allOf:
> - - $ref: panel-common.yaml#
> -
> properties:
> - compatible:
> - contains:
> - const: panel-lvds
> - description:
> - Shall contain "panel-lvds" in addition to a mandatory panel-specific
> - compatible string defined in individual panel bindings. The "panel-lvds"
> - value shall never be used on its own.
> -
> data-mapping:
> enum:
> - jeida-18
> @@ -96,22 +85,6 @@ properties:
> If set, reverse the bit order described in the data mappings below on all
> data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
>
> - port: true
> - ports: true
> -
> -required:
> - - compatible
> - - data-mapping
> - - width-mm
> - - height-mm
> - - panel-timing
> -
> -oneOf:
> - - required:
> - - port
> - - required:
> - - ports
> -
> additionalProperties: true
>
> ...
> diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
> index b5e7ee230fa6..e684b9771532 100644
> --- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
> @@ -11,13 +11,23 @@ maintainers:
> - Thierry Reding <thierry.reding@gmail.com>
>
> allOf:
> + - $ref: panel-common.yaml#
> - $ref: lvds.yaml#
>
> +select:
> + properties:
> + compatible:
> + contains:
> + const: mitsubishi,aa104xd12
> +
> + required:
> + - compatible
> +
> properties:
> compatible:
> items:
> - const: mitsubishi,aa104xd12
> - - {} # panel-lvds, but not listed here to avoid false select
> + - const: panel-lvds
>
> vcc-supply:
> description: Reference to the regulator powering the panel VCC pins.
> @@ -39,6 +49,11 @@ additionalProperties: false
> required:
> - compatible
> - vcc-supply
> + - data-mapping
> + - width-mm
> + - height-mm
> + - panel-timing
> + - port
>
> examples:
> - |+
> diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
> index 977c50a85b67..c0df6ee89c7a 100644
> --- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
> @@ -11,13 +11,23 @@ maintainers:
> - Thierry Reding <thierry.reding@gmail.com>
>
> allOf:
> + - $ref: panel-common.yaml#
> - $ref: lvds.yaml#
>
> +select:
> + properties:
> + compatible:
> + contains:
> + const: mitsubishi,aa121td01
> +
> + required:
> + - compatible
> +
> properties:
> compatible:
> items:
> - const: mitsubishi,aa121td01
> - - {} # panel-lvds, but not listed here to avoid false select
> + - const: panel-lvds
>
> vcc-supply:
> description: Reference to the regulator powering the panel VCC pins.
> @@ -39,6 +49,11 @@ additionalProperties: false
> required:
> - compatible
> - vcc-supply
> + - data-mapping
> + - width-mm
> + - height-mm
> + - panel-timing
> + - port
>
> examples:
> - |+
> diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
> index e63a570ae59d..8bb85701e507 100644
> --- a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
> @@ -11,13 +11,23 @@ maintainers:
> - Thierry Reding <thierry.reding@gmail.com>
>
> allOf:
> + - $ref: panel-common.yaml#
> - $ref: lvds.yaml#
>
> +select:
> + properties:
> + compatible:
> + contains:
> + const: sgd,gktw70sdae4se
> +
> + required:
> + - compatible
> +
> properties:
> compatible:
> items:
> - const: sgd,gktw70sdae4se
> - - {} # panel-lvds, but not listed here to avoid false select
> + - const: panel-lvds
>
> data-mapping:
> const: jeida-18
> @@ -35,6 +45,11 @@ additionalProperties: false
>
> required:
> - compatible
> + - port
> + - data-mapping
> + - width-mm
> + - height-mm
> + - panel-timing
>
> examples:
> - |+
--
Regards,
Laurent Pinchart
WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Maxime Ripard <maxime@cerno.tech>
Cc: devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>,
Frank Rowand <frowand.list@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
dri-devel@lists.freedesktop.org,
Daniel Vetter <daniel.vetter@intel.com>,
Sam Ravnborg <sam@ravnborg.org>
Subject: Re: [PATCH 1/2] dt-bindings: display: Turn lvds.yaml into a generic schema
Date: Sat, 20 Nov 2021 00:46:33 +0200 [thread overview]
Message-ID: <YZgpSWVXjKr9secH@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20211116143503.385807-1-maxime@cerno.tech>
Hi Maxime,
Thank you for the patch.
On Tue, Nov 16, 2021 at 03:35:02PM +0100, Maxime Ripard wrote:
> The lvds.yaml file so far was both defining the generic LVDS properties
> (such as data-mapping) that could be used for any LVDS sink, but also
> the panel-lvds binding.
>
> That last binding was to describe LVDS panels simple enough, and had a
> number of other bindings using it as a base to specialise it further.
>
> However, this situation makes it fairly hard to extend and reuse both
> the generic parts, and the panel-lvds itself.
>
> Let's remove the panel-lvds parts and leave only the generic LVDS
> properties.
>
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
> .../display/panel/advantech,idk-1110wr.yaml | 17 ++++++++++-
> .../display/panel/innolux,ee101ia-01d.yaml | 21 +++++++++++++-
> .../bindings/display/panel/lvds.yaml | 29 +------------------
> .../display/panel/mitsubishi,aa104xd12.yaml | 17 ++++++++++-
> .../display/panel/mitsubishi,aa121td01.yaml | 17 ++++++++++-
> .../display/panel/sgd,gktw70sdae4se.yaml | 17 ++++++++++-
> 6 files changed, 85 insertions(+), 33 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
> index 93878c2cd370..f27cd2038636 100644
> --- a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
> @@ -11,13 +11,23 @@ maintainers:
> - Thierry Reding <thierry.reding@gmail.com>
>
> allOf:
> + - $ref: panel-common.yaml#
> - $ref: lvds.yaml#
>
> +select:
> + properties:
> + compatible:
> + contains:
> + const: advantech,idk-1110wr
> +
> + required:
> + - compatible
I've never encountered this before, what does it do ?
> +
> properties:
> compatible:
> items:
> - const: advantech,idk-1110wr
> - - {} # panel-lvds, but not listed here to avoid false select
> + - const: panel-lvds
>
> data-mapping:
> const: jeida-24
> @@ -35,6 +45,11 @@ additionalProperties: false
>
> required:
> - compatible
> + - data-mapping
> + - width-mm
> + - height-mm
> + - panel-timing
> + - port
>
> examples:
> - |+
> diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
> index a69681e724cb..6e06eecac14e 100644
> --- a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
> @@ -11,15 +11,26 @@ maintainers:
> - Thierry Reding <thierry.reding@gmail.com>
>
> allOf:
> + - $ref: panel-common.yaml#
> - $ref: lvds.yaml#
>
> +select:
> + properties:
> + compatible:
> + contains:
> + const: innolux,ee101ia-01d
> +
> + required:
> + - compatible
> +
> properties:
> compatible:
> items:
> - const: innolux,ee101ia-01d
> - - {} # panel-lvds, but not listed here to avoid false select
> + - const: panel-lvds
>
> backlight: true
> + data-mapping: true
> enable-gpios: true
> power-supply: true
> width-mm: true
> @@ -27,5 +38,13 @@ properties:
> panel-timing: true
> port: true
>
> +required:
> + - compatible
> + - data-mapping
> + - width-mm
> + - height-mm
> + - panel-timing
> + - port
> +
> additionalProperties: false
> ...
> diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml
> index 49460c9dceea..5281a75c8bb5 100644
> --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml
> @@ -4,7 +4,7 @@
> $id: http://devicetree.org/schemas/display/panel/lvds.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> -title: LVDS Display Panel
> +title: LVDS Display Common Properties
Maybe
title: LVDS Display Panel Common Properties
or do you foresee this being useful for non-panel LBDS sinks too ? In
that case the title is fine, but the file could be moved in the parent
directory.
I'm also wondering what we should do with the data-mapping and
data-mirror properties. For an LVDS panel they're fine at the device
level, but for an LVDS sink, they may be better placed at the port or
endpoint level.
>
> maintainers:
> - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> @@ -26,18 +26,7 @@ description: |+
> Device compatible with those specifications have been marketed under the
> FPD-Link and FlatLink brands.
>
> -allOf:
> - - $ref: panel-common.yaml#
> -
> properties:
> - compatible:
> - contains:
> - const: panel-lvds
> - description:
> - Shall contain "panel-lvds" in addition to a mandatory panel-specific
> - compatible string defined in individual panel bindings. The "panel-lvds"
> - value shall never be used on its own.
> -
> data-mapping:
> enum:
> - jeida-18
> @@ -96,22 +85,6 @@ properties:
> If set, reverse the bit order described in the data mappings below on all
> data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
>
> - port: true
> - ports: true
> -
> -required:
> - - compatible
> - - data-mapping
> - - width-mm
> - - height-mm
> - - panel-timing
> -
> -oneOf:
> - - required:
> - - port
> - - required:
> - - ports
> -
> additionalProperties: true
>
> ...
> diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
> index b5e7ee230fa6..e684b9771532 100644
> --- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
> @@ -11,13 +11,23 @@ maintainers:
> - Thierry Reding <thierry.reding@gmail.com>
>
> allOf:
> + - $ref: panel-common.yaml#
> - $ref: lvds.yaml#
>
> +select:
> + properties:
> + compatible:
> + contains:
> + const: mitsubishi,aa104xd12
> +
> + required:
> + - compatible
> +
> properties:
> compatible:
> items:
> - const: mitsubishi,aa104xd12
> - - {} # panel-lvds, but not listed here to avoid false select
> + - const: panel-lvds
>
> vcc-supply:
> description: Reference to the regulator powering the panel VCC pins.
> @@ -39,6 +49,11 @@ additionalProperties: false
> required:
> - compatible
> - vcc-supply
> + - data-mapping
> + - width-mm
> + - height-mm
> + - panel-timing
> + - port
>
> examples:
> - |+
> diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
> index 977c50a85b67..c0df6ee89c7a 100644
> --- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
> @@ -11,13 +11,23 @@ maintainers:
> - Thierry Reding <thierry.reding@gmail.com>
>
> allOf:
> + - $ref: panel-common.yaml#
> - $ref: lvds.yaml#
>
> +select:
> + properties:
> + compatible:
> + contains:
> + const: mitsubishi,aa121td01
> +
> + required:
> + - compatible
> +
> properties:
> compatible:
> items:
> - const: mitsubishi,aa121td01
> - - {} # panel-lvds, but not listed here to avoid false select
> + - const: panel-lvds
>
> vcc-supply:
> description: Reference to the regulator powering the panel VCC pins.
> @@ -39,6 +49,11 @@ additionalProperties: false
> required:
> - compatible
> - vcc-supply
> + - data-mapping
> + - width-mm
> + - height-mm
> + - panel-timing
> + - port
>
> examples:
> - |+
> diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
> index e63a570ae59d..8bb85701e507 100644
> --- a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
> @@ -11,13 +11,23 @@ maintainers:
> - Thierry Reding <thierry.reding@gmail.com>
>
> allOf:
> + - $ref: panel-common.yaml#
> - $ref: lvds.yaml#
>
> +select:
> + properties:
> + compatible:
> + contains:
> + const: sgd,gktw70sdae4se
> +
> + required:
> + - compatible
> +
> properties:
> compatible:
> items:
> - const: sgd,gktw70sdae4se
> - - {} # panel-lvds, but not listed here to avoid false select
> + - const: panel-lvds
>
> data-mapping:
> const: jeida-18
> @@ -35,6 +45,11 @@ additionalProperties: false
>
> required:
> - compatible
> + - port
> + - data-mapping
> + - width-mm
> + - height-mm
> + - panel-timing
>
> examples:
> - |+
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2021-11-19 22:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-16 14:35 [PATCH 1/2] dt-bindings: display: Turn lvds.yaml into a generic schema Maxime Ripard
2021-11-16 14:35 ` Maxime Ripard
2021-11-16 14:35 ` [PATCH 2/2] dt-bindings: panel: Introduce a panel-lvds binding Maxime Ripard
2021-11-16 14:35 ` Maxime Ripard
2021-11-17 2:27 ` Rob Herring
2021-11-17 2:27 ` Rob Herring
2021-11-18 22:56 ` Rob Herring
2021-11-18 22:56 ` Rob Herring
2021-11-19 22:48 ` Laurent Pinchart
2021-11-19 22:48 ` Laurent Pinchart
2021-11-18 22:49 ` [PATCH 1/2] dt-bindings: display: Turn lvds.yaml into a generic schema Rob Herring
2021-11-18 22:49 ` Rob Herring
2021-11-19 22:46 ` Laurent Pinchart [this message]
2021-11-19 22:46 ` Laurent Pinchart
2021-11-22 14:53 ` Maxime Ripard
2021-11-22 14:53 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YZgpSWVXjKr9secH@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=airlied@linux.ie \
--cc=daniel.vetter@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=frowand.list@gmail.com \
--cc=maxime@cerno.tech \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.