[PATCH 0/3] A few smd-rpm clock driver cleanups

[PATCH 0/3] A few smd-rpm clock driver cleanups

[Shawn Guo]

Here are a few smd-rpm clock driver cleanups found in the code
inspection.

Shawn Guo (3):
  clk: qcom: smd-rpm: Drop MFD qcom-rpm reference
  clk: qcom: smd-rpm: Drop the use of struct rpm_cc
  clk: qcom: smd-rpm: Drop binary value handling for buffered clock

 drivers/clk/qcom/clk-smd-rpm.c | 31 ++++---------------------------
 1 file changed, 4 insertions(+), 27 deletions(-)

-- 
2.17.1

[PATCH 1/3] clk: qcom: smd-rpm: Drop MFD qcom-rpm reference

[Shawn Guo]

The MFD qcom-rpm interface is not used by this driver.  Drop the 'struct
qcom_rpm' reference and include of <dt-bindings/mfd/qcom-rpm.h>.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/qcom/clk-smd-rpm.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 5776d85a1e5c..a27c0e740ab7 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -17,7 +17,6 @@
 #include <linux/soc/qcom/smd-rpm.h>
 
 #include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
 
 #define QCOM_RPM_KEY_SOFTWARE_ENABLE			0x6e657773
 #define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY	0x62636370
@@ -152,7 +151,6 @@ struct clk_smd_rpm_req {
 };
 
 struct rpm_cc {
-	struct qcom_rpm *rpm;
 	struct clk_smd_rpm **clks;
 	size_t num_clks;
 };
-- 
2.17.1

[PATCH 2/3] clk: qcom: smd-rpm: Drop the use of struct rpm_cc

[Shawn Guo]

Considering that struct rpm_cc is now identical to rpm_smd_clk_desc,
and function qcom_smdrpm_clk_hw_get() uses rpm_cc in a read-only manner,
rpm_cc can be dropped by getting the function use rpm_smd_clk_desc
directly.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/qcom/clk-smd-rpm.c | 21 ++++-----------------
 1 file changed, 4 insertions(+), 17 deletions(-)

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index a27c0e740ab7..dd3d373a1309 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -150,11 +150,6 @@ struct clk_smd_rpm_req {
 	__le32 value;
 };
 
-struct rpm_cc {
-	struct clk_smd_rpm **clks;
-	size_t num_clks;
-};
-
 struct rpm_smd_clk_desc {
 	struct clk_smd_rpm **clks;
 	size_t num_clks;
@@ -1157,20 +1152,19 @@ MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);
 static struct clk_hw *qcom_smdrpm_clk_hw_get(struct of_phandle_args *clkspec,
 					     void *data)
 {
-	struct rpm_cc *rcc = data;
+	const struct rpm_smd_clk_desc *desc = data;
 	unsigned int idx = clkspec->args[0];
 
-	if (idx >= rcc->num_clks) {
+	if (idx >= desc->num_clks) {
 		pr_err("%s: invalid index %u\n", __func__, idx);
 		return ERR_PTR(-EINVAL);
 	}
 
-	return rcc->clks[idx] ? &rcc->clks[idx]->hw : ERR_PTR(-ENOENT);
+	return desc->clks[idx] ? &desc->clks[idx]->hw : ERR_PTR(-ENOENT);
 }
 
 static int rpm_smd_clk_probe(struct platform_device *pdev)
 {
-	struct rpm_cc *rcc;
 	int ret;
 	size_t num_clks, i;
 	struct qcom_smd_rpm *rpm;
@@ -1190,13 +1184,6 @@ static int rpm_smd_clk_probe(struct platform_device *pdev)
 	rpm_smd_clks = desc->clks;
 	num_clks = desc->num_clks;
 
-	rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc), GFP_KERNEL);
-	if (!rcc)
-		return -ENOMEM;
-
-	rcc->clks = rpm_smd_clks;
-	rcc->num_clks = num_clks;
-
 	for (i = 0; i < num_clks; i++) {
 		if (!rpm_smd_clks[i])
 			continue;
@@ -1222,7 +1209,7 @@ static int rpm_smd_clk_probe(struct platform_device *pdev)
 	}
 
 	ret = devm_of_clk_add_hw_provider(&pdev->dev, qcom_smdrpm_clk_hw_get,
-				     rcc);
+					  (void *)desc);
 	if (ret)
 		goto err;
 
-- 
2.17.1

Re: [PATCH 2/3] clk: qcom: smd-rpm: Drop the use of struct rpm_cc

[Bjorn Andersson]

On Sat 30 Oct 21:07 CDT 2021, Shawn Guo wrote:

> Considering that struct rpm_cc is now identical to rpm_smd_clk_desc,
> and function qcom_smdrpm_clk_hw_get() uses rpm_cc in a read-only manner,
> rpm_cc can be dropped by getting the function use rpm_smd_clk_desc
> directly.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  drivers/clk/qcom/clk-smd-rpm.c | 21 ++++-----------------
>  1 file changed, 4 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
> index a27c0e740ab7..dd3d373a1309 100644
> --- a/drivers/clk/qcom/clk-smd-rpm.c
> +++ b/drivers/clk/qcom/clk-smd-rpm.c
> @@ -150,11 +150,6 @@ struct clk_smd_rpm_req {
>  	__le32 value;
>  };
>  
> -struct rpm_cc {
> -	struct clk_smd_rpm **clks;
> -	size_t num_clks;
> -};
> -
>  struct rpm_smd_clk_desc {
>  	struct clk_smd_rpm **clks;
>  	size_t num_clks;
> @@ -1157,20 +1152,19 @@ MODULE_DEVICE_TABLE(of, rpm_smd_clk_match_table);
>  static struct clk_hw *qcom_smdrpm_clk_hw_get(struct of_phandle_args *clkspec,
>  					     void *data)
>  {
> -	struct rpm_cc *rcc = data;
> +	const struct rpm_smd_clk_desc *desc = data;
>  	unsigned int idx = clkspec->args[0];
>  
> -	if (idx >= rcc->num_clks) {
> +	if (idx >= desc->num_clks) {
>  		pr_err("%s: invalid index %u\n", __func__, idx);
>  		return ERR_PTR(-EINVAL);
>  	}
>  
> -	return rcc->clks[idx] ? &rcc->clks[idx]->hw : ERR_PTR(-ENOENT);
> +	return desc->clks[idx] ? &desc->clks[idx]->hw : ERR_PTR(-ENOENT);
>  }
>  
>  static int rpm_smd_clk_probe(struct platform_device *pdev)
>  {
> -	struct rpm_cc *rcc;
>  	int ret;
>  	size_t num_clks, i;
>  	struct qcom_smd_rpm *rpm;
> @@ -1190,13 +1184,6 @@ static int rpm_smd_clk_probe(struct platform_device *pdev)
>  	rpm_smd_clks = desc->clks;
>  	num_clks = desc->num_clks;
>  
> -	rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc), GFP_KERNEL);
> -	if (!rcc)
> -		return -ENOMEM;
> -
> -	rcc->clks = rpm_smd_clks;
> -	rcc->num_clks = num_clks;
> -
>  	for (i = 0; i < num_clks; i++) {
>  		if (!rpm_smd_clks[i])
>  			continue;
> @@ -1222,7 +1209,7 @@ static int rpm_smd_clk_probe(struct platform_device *pdev)
>  	}
>  
>  	ret = devm_of_clk_add_hw_provider(&pdev->dev, qcom_smdrpm_clk_hw_get,
> -				     rcc);
> +					  (void *)desc);
>  	if (ret)
>  		goto err;
>  
> -- 
> 2.17.1
> 

[PATCH 3/3] clk: qcom: smd-rpm: Drop binary value handling for buffered clock

[Shawn Guo]

The buffered clock binary value handling added by commit 36354c32bd76
("clk: qcom: smd-rpm: Add .recalc_rate hook for clk_smd_rpm_branch_ops")
is redundant, because buffered clock is branch type, and the binary
value handling for branch clock has been handled by
clk_smd_rpm_prepare/unprepare functions.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/clk/qcom/clk-smd-rpm.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index dd3d373a1309..ea28e45ca371 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -189,10 +189,6 @@ static int clk_smd_rpm_set_rate_active(struct clk_smd_rpm *r,
 		.value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
 	};
 
-	/* Buffered clock needs a binary value */
-	if (r->rpm_res_type == QCOM_SMD_RPM_CLK_BUF_A)
-		req.value = cpu_to_le32(!!req.value);
-
 	return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
 				  r->rpm_res_type, r->rpm_clk_id, &req,
 				  sizeof(req));
@@ -207,10 +203,6 @@ static int clk_smd_rpm_set_rate_sleep(struct clk_smd_rpm *r,
 		.value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
 	};
 
-	/* Buffered clock needs a binary value */
-	if (r->rpm_res_type == QCOM_SMD_RPM_CLK_BUF_A)
-		req.value = cpu_to_le32(!!req.value);
-
 	return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
 				  r->rpm_res_type, r->rpm_clk_id, &req,
 				  sizeof(req));
-- 
2.17.1

Re: [PATCH 3/3] clk: qcom: smd-rpm: Drop binary value handling for buffered clock

[Bjorn Andersson]

On Sat 30 Oct 21:07 CDT 2021, Shawn Guo wrote:

> The buffered clock binary value handling added by commit 36354c32bd76
> ("clk: qcom: smd-rpm: Add .recalc_rate hook for clk_smd_rpm_branch_ops")
> is redundant, because buffered clock is branch type, and the binary
> value handling for branch clock has been handled by
> clk_smd_rpm_prepare/unprepare functions.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  drivers/clk/qcom/clk-smd-rpm.c | 8 --------
>  1 file changed, 8 deletions(-)
> 
> diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
> index dd3d373a1309..ea28e45ca371 100644
> --- a/drivers/clk/qcom/clk-smd-rpm.c
> +++ b/drivers/clk/qcom/clk-smd-rpm.c
> @@ -189,10 +189,6 @@ static int clk_smd_rpm_set_rate_active(struct clk_smd_rpm *r,
>  		.value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
>  	};
>  
> -	/* Buffered clock needs a binary value */
> -	if (r->rpm_res_type == QCOM_SMD_RPM_CLK_BUF_A)
> -		req.value = cpu_to_le32(!!req.value);
> -
>  	return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
>  				  r->rpm_res_type, r->rpm_clk_id, &req,
>  				  sizeof(req));
> @@ -207,10 +203,6 @@ static int clk_smd_rpm_set_rate_sleep(struct clk_smd_rpm *r,
>  		.value = cpu_to_le32(DIV_ROUND_UP(rate, 1000)), /* to kHz */
>  	};
>  
> -	/* Buffered clock needs a binary value */
> -	if (r->rpm_res_type == QCOM_SMD_RPM_CLK_BUF_A)
> -		req.value = cpu_to_le32(!!req.value);
> -
>  	return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_SLEEP_STATE,
>  				  r->rpm_res_type, r->rpm_clk_id, &req,
>  				  sizeof(req));
> -- 
> 2.17.1
> 

Re: [PATCH 3/3] clk: qcom: smd-rpm: Drop binary value handling for buffered clock

[Stephen Boyd]

Quoting Bjorn Andersson (2021-12-06 07:26:44)
> On Sat 30 Oct 21:07 CDT 2021, Shawn Guo wrote:
> 
> > The buffered clock binary value handling added by commit 36354c32bd76
> > ("clk: qcom: smd-rpm: Add .recalc_rate hook for clk_smd_rpm_branch_ops")
> > is redundant, because buffered clock is branch type, and the binary
> > value handling for branch clock has been handled by
> > clk_smd_rpm_prepare/unprepare functions.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> 
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Does that mean you picked it up? Or you want me to pick it up?

Re: [PATCH 3/3] clk: qcom: smd-rpm: Drop binary value handling for buffered clock

[Bjorn Andersson]

On Mon 06 Dec 14:21 PST 2021, Stephen Boyd wrote:

> Quoting Bjorn Andersson (2021-12-06 07:26:44)
> > On Sat 30 Oct 21:07 CDT 2021, Shawn Guo wrote:
> > 
> > > The buffered clock binary value handling added by commit 36354c32bd76
> > > ("clk: qcom: smd-rpm: Add .recalc_rate hook for clk_smd_rpm_branch_ops")
> > > is redundant, because buffered clock is branch type, and the binary
> > > value handling for branch clock has been handled by
> > > clk_smd_rpm_prepare/unprepare functions.
> > > 
> > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > 
> > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> Does that mean you picked it up? Or you want me to pick it up?

It meant that I reviewed the patch, but as it's not a regression I then
went on to pick it up for clk-next - there should be a "thank you" from
a few minutes ago.

I'll ensure to include a note for you in the future when it could go in
either branch.

Regards,
Bjorn

Re: [PATCH 3/3] clk: qcom: smd-rpm: Drop binary value handling for buffered clock

[Stephen Boyd]

Quoting Bjorn Andersson (2021-12-06 14:36:48)
> On Mon 06 Dec 14:21 PST 2021, Stephen Boyd wrote:
> 
> > Quoting Bjorn Andersson (2021-12-06 07:26:44)
> > > On Sat 30 Oct 21:07 CDT 2021, Shawn Guo wrote:
> > > 
> > > > The buffered clock binary value handling added by commit 36354c32bd76
> > > > ("clk: qcom: smd-rpm: Add .recalc_rate hook for clk_smd_rpm_branch_ops")
> > > > is redundant, because buffered clock is branch type, and the binary
> > > > value handling for branch clock has been handled by
> > > > clk_smd_rpm_prepare/unprepare functions.
> > > > 
> > > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > > 
> > > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > 
> > Does that mean you picked it up? Or you want me to pick it up?
> 
> It meant that I reviewed the patch, but as it's not a regression I then
> went on to pick it up for clk-next - there should be a "thank you" from
> a few minutes ago.
> 
> I'll ensure to include a note for you in the future when it could go in
> either branch.
> 

Ok, thanks.

Re: [PATCH 0/3] A few smd-rpm clock driver cleanups

[Bjorn Andersson]

On Sun, 31 Oct 2021 10:07:12 +0800, Shawn Guo wrote:
> Here are a few smd-rpm clock driver cleanups found in the code
> inspection.
> 
> Shawn Guo (3):
>   clk: qcom: smd-rpm: Drop MFD qcom-rpm reference
>   clk: qcom: smd-rpm: Drop the use of struct rpm_cc
>   clk: qcom: smd-rpm: Drop binary value handling for buffered clock
> 
> [...]

Applied, thanks!

[1/3] clk: qcom: smd-rpm: Drop MFD qcom-rpm reference
      commit: 00a123e962f7f17163ee7f665f483d3ba25f54a6
[2/3] clk: qcom: smd-rpm: Drop the use of struct rpm_cc
      commit: b406f5e92b3ba6c8fe89f16cb61e60190e45171b
[3/3] clk: qcom: smd-rpm: Drop binary value handling for buffered clock
      commit: b26ab06d0969ed9e901f93390242437ac5802c4d

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>