Re: [PATCH v6 5/8] phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver

From: Vinod Koul <vkoul@kernel.org>
To: Richard Zhu <hongxing.zhu@nxp.com>
Cc: l.stach@pengutronix.de, bhelgaas@google.com,
	lorenzo.pieralisi@arm.com, marcel.ziswiler@toradex.com,
	tharvey@gateworks.com, kishon@ti.com, robh@kernel.org,
	galak@kernel.crashing.org, shawnguo@kernel.org,
	linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com
Subject: Re: [PATCH v6 5/8] phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver
Date: Thu, 2 Dec 2021 10:00:13 +0530	[thread overview]
Message-ID: <YahL1TMkt8S0RNX5@matsya> (raw)
In-Reply-To: <1637200489-11855-6-git-send-email-hongxing.zhu@nxp.com>

On 18-11-21, 09:54, Richard Zhu wrote:
> Add the standalone i.MX8 PCIe PHY driver.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Reviewed-by: Tim Harvey <tharvey@gateworks.com>
> Tested-by: Tim Harvey <tharvey@gateworks.com>
> ---
>  drivers/phy/freescale/Kconfig              |   9 +
>  drivers/phy/freescale/Makefile             |   1 +
>  drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 237 +++++++++++++++++++++
>  3 files changed, 247 insertions(+)
>  create mode 100644 drivers/phy/freescale/phy-fsl-imx8m-pcie.c
> 
> diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> index 320630ffe3cd..e821498b1f7f 100644
> --- a/drivers/phy/freescale/Kconfig
> +++ b/drivers/phy/freescale/Kconfig
> @@ -14,3 +14,12 @@ config PHY_MIXEL_MIPI_DPHY
>  	help
>  	  Enable this to add support for the Mixel DSI PHY as found
>  	  on NXP's i.MX8 family of SOCs.
> +
> +config PHY_FSL_IMX8M_PCIE
> +	tristate "Freescale i.MX8M PCIE PHY"
> +	depends on OF && HAS_IOMEM
> +	select GENERIC_PHY
> +	default ARCH_MXC && ARM64

Why should this be default ? We dont do that for new drivers.. You may
add this to respective config file though...

> +static int imx8_pcie_phy_init(struct phy *phy)
> +{
> +	int ret;
> +	u32 val, pad_mode;
> +	struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
> +
> +	reset_control_assert(imx8_phy->reset);
> +
> +	pad_mode = imx8_phy->refclk_pad_mode;
> +	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
> +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> +			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
> +			   imx8_phy->clkreq_unused ?
> +			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
> +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> +			   IMX8MM_GPR_PCIE_AUX_EN,
> +			   IMX8MM_GPR_PCIE_AUX_EN);
> +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> +			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
> +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> +			   IMX8MM_GPR_PCIE_SSC_EN, 0);
> +
> +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> +			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
> +			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
> +			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
> +			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
> +	usleep_range(100, 200);
> +
> +	/* Do the PHY common block reset */
> +	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
> +			   IMX8MM_GPR_PCIE_CMN_RST,
> +			   IMX8MM_GPR_PCIE_CMN_RST);
> +	usleep_range(200, 500);
> +
> +

No multi blank line please

> +static struct platform_driver imx8_pcie_phy_driver = {
> +	.probe	= imx8_pcie_phy_probe,
> +	.driver = {
> +		.name	= "imx8-pcie-phy",
> +		.of_match_table	= imx8_pcie_phy_of_match,
> +	}
> +};
> +module_platform_driver(imx8_pcie_phy_driver);
> +
> +MODULE_DESCRIPTION("FSL IMX8 PCIE PHY driver");
> +MODULE_LICENSE("GPL");

This does not match the SPDX tag you have given

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy