From: Rob Herring <robh@kernel.org>
To: Stephan Gerhold <stephan@gerhold.net>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
Banajit Goswami <bgoswami@codeaurora.org>,
linux-arm-msm@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
~postmarketos/upstreaming@lists.sr.ht
Subject: Re: [PATCH 3/5] ASoC: dt-bindings: qcom: apq8016-sbc: Move to qcom,sm8250 DT schema
Date: Mon, 13 Dec 2021 14:23:11 -0600 [thread overview]
Message-ID: <YberrygvFWcGtV7L@robh.at.kernel.org> (raw)
In-Reply-To: <20211202145505.58852-4-stephan@gerhold.net>
On Thu, 02 Dec 2021 15:55:03 +0100, Stephan Gerhold wrote:
> All the Qualcomm sound card drivers use the same common device tree
> parsing code, so the allowed device tree nodes are almost the same
> for all of them. Convert the qcom,apq8016-sbc-sndcard documentation
> to a DT schema by adding it to the existing qcom,sm8250 schema.
>
> The only speciality of qcom,apq8016-sbc-sndcard is that it has memory
> resources for setting up an I/O mux. This can be handled using
> a conditional if statement that only requires it for the apq8016-sbc
> compatible.
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> Note: There will be a dtbs_check warning caused by this, because the
> recommended naming for nodes is different in this DT schema (-dai-link
> suffix). I will address this in a separate patch if this series is
> accepted, simply by changing apq8016-sbc.dts to the example added
> in this patch. The driver itself accepts any naming for those nodes.
> ---
> .../bindings/sound/qcom,apq8016-sbc.txt | 96 -------------------
> .../bindings/sound/qcom,sm8250.yaml | 83 +++++++++++++++-
> 2 files changed, 81 insertions(+), 98 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Stephan Gerhold <stephan@gerhold.net>
Cc: Rob Herring <robh+dt@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Banajit Goswami <bgoswami@codeaurora.org>,
~postmarketos/upstreaming@lists.sr.ht,
Bjorn Andersson <bjorn.andersson@linaro.org>,
linux-arm-msm@vger.kernel.org, Mark Brown <broonie@kernel.org>,
devicetree@vger.kernel.org, alsa-devel@alsa-project.org
Subject: Re: [PATCH 3/5] ASoC: dt-bindings: qcom: apq8016-sbc: Move to qcom,sm8250 DT schema
Date: Mon, 13 Dec 2021 14:23:11 -0600 [thread overview]
Message-ID: <YberrygvFWcGtV7L@robh.at.kernel.org> (raw)
In-Reply-To: <20211202145505.58852-4-stephan@gerhold.net>
On Thu, 02 Dec 2021 15:55:03 +0100, Stephan Gerhold wrote:
> All the Qualcomm sound card drivers use the same common device tree
> parsing code, so the allowed device tree nodes are almost the same
> for all of them. Convert the qcom,apq8016-sbc-sndcard documentation
> to a DT schema by adding it to the existing qcom,sm8250 schema.
>
> The only speciality of qcom,apq8016-sbc-sndcard is that it has memory
> resources for setting up an I/O mux. This can be handled using
> a conditional if statement that only requires it for the apq8016-sbc
> compatible.
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> Note: There will be a dtbs_check warning caused by this, because the
> recommended naming for nodes is different in this DT schema (-dai-link
> suffix). I will address this in a separate patch if this series is
> accepted, simply by changing apq8016-sbc.dts to the example added
> in this patch. The driver itself accepts any naming for those nodes.
> ---
> .../bindings/sound/qcom,apq8016-sbc.txt | 96 -------------------
> .../bindings/sound/qcom,sm8250.yaml | 83 +++++++++++++++-
> 2 files changed, 81 insertions(+), 98 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
next prev parent reply other threads:[~2021-12-13 20:24 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-02 14:55 [PATCH 0/5] ASoC: qcom: apq8016_sbc: Allow routing audio through QDSP6 Stephan Gerhold
2021-12-02 14:55 ` Stephan Gerhold
2021-12-02 14:55 ` [PATCH 1/5] ASoC: dt-bindings: qcom: sm8250: Drop redundant MultiMedia routes Stephan Gerhold
2021-12-02 14:55 ` Stephan Gerhold
2021-12-13 20:21 ` Rob Herring
2021-12-13 20:21 ` Rob Herring
2021-12-02 14:55 ` [PATCH 2/5] ASoC: dt-bindings: qcom: sm8250: Document "aux-devs" Stephan Gerhold
2021-12-02 14:55 ` Stephan Gerhold
2021-12-13 20:21 ` Rob Herring
2021-12-13 20:21 ` Rob Herring
2021-12-02 14:55 ` [PATCH 3/5] ASoC: dt-bindings: qcom: apq8016-sbc: Move to qcom, sm8250 DT schema Stephan Gerhold
2021-12-02 14:55 ` [PATCH 3/5] ASoC: dt-bindings: qcom: apq8016-sbc: Move to qcom,sm8250 " Stephan Gerhold
2021-12-13 20:23 ` Rob Herring [this message]
2021-12-13 20:23 ` Rob Herring
2021-12-02 14:55 ` [PATCH 4/5] ASoC: dt-bindings: qcom: Document qcom, msm8916-qdsp6-sndcard compatible Stephan Gerhold
2021-12-02 14:55 ` [PATCH 4/5] ASoC: dt-bindings: qcom: Document qcom,msm8916-qdsp6-sndcard compatible Stephan Gerhold
2021-12-13 20:24 ` Rob Herring
2021-12-13 20:24 ` Rob Herring
2021-12-02 14:55 ` [PATCH 5/5] ASoC: qcom: apq8016_sbc: Allow routing audio through QDSP6 Stephan Gerhold
2021-12-02 14:55 ` Stephan Gerhold
2021-12-03 10:35 ` Srinivas Kandagatla
2021-12-03 10:35 ` Srinivas Kandagatla
2021-12-03 14:36 ` Stephan Gerhold
2021-12-03 14:36 ` Stephan Gerhold
2021-12-03 14:52 ` Srinivas Kandagatla
2021-12-03 14:52 ` Srinivas Kandagatla
2021-12-03 15:09 ` Stephan Gerhold
2021-12-03 15:09 ` Stephan Gerhold
2021-12-03 15:27 ` Srinivas Kandagatla
2021-12-03 15:27 ` Srinivas Kandagatla
2021-12-03 10:34 ` [PATCH 0/5] " Srinivas Kandagatla
2021-12-03 10:34 ` Srinivas Kandagatla
2021-12-14 13:25 ` Mark Brown
2021-12-14 13:25 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YberrygvFWcGtV7L@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=stephan@gerhold.net \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.