All of lore.kernel.org
 help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH 3/3] clk: imx8mp: remove SYS PLL 1/2 clock gates
Date: Fri, 25 Feb 2022 16:35:13 +0200	[thread overview]
Message-ID: <YhjpIbIVf7DQh/Ja@abelvesa> (raw)
In-Reply-To: <20220225081733.2294166-4-peng.fan@oss.nxp.com>

On 22-02-25 16:17:33, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Remove the PLL 1/2 gates as it make AMP clock management harder without
> obvious benifit.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/clk/imx/clk-imx8mp.c | 48 ++++++++++++------------------------
>  1 file changed, 16 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
> index f23b92906d3b..18f5b7c3ca9d 100644
> --- a/drivers/clk/imx/clk-imx8mp.c
> +++ b/drivers/clk/imx/clk-imx8mp.c
> @@ -480,44 +480,28 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
>  	hws[IMX8MP_ARM_PLL_OUT] = imx_clk_hw_gate("arm_pll_out", "arm_pll_bypass", anatop_base + 0x84, 11);
>  	hws[IMX8MP_SYS_PLL3_OUT] = imx_clk_hw_gate("sys_pll3_out", "sys_pll3_bypass", anatop_base + 0x114, 11);
>  
> -	hws[IMX8MP_SYS_PLL1_40M_CG] = imx_clk_hw_gate("sys_pll1_40m_cg", "sys_pll1_bypass", anatop_base + 0x94, 27);

Hmm, isn't there a chance that u-boot might gate these? Then, in kernel
you won't have a way to ungate them, leaving the consumers hanging.

> -	hws[IMX8MP_SYS_PLL1_80M_CG] = imx_clk_hw_gate("sys_pll1_80m_cg", "sys_pll1_bypass", anatop_base + 0x94, 25);
> -	hws[IMX8MP_SYS_PLL1_100M_CG] = imx_clk_hw_gate("sys_pll1_100m_cg", "sys_pll1_bypass", anatop_base + 0x94, 23);
> -	hws[IMX8MP_SYS_PLL1_133M_CG] = imx_clk_hw_gate("sys_pll1_133m_cg", "sys_pll1_bypass", anatop_base + 0x94, 21);
> -	hws[IMX8MP_SYS_PLL1_160M_CG] = imx_clk_hw_gate("sys_pll1_160m_cg", "sys_pll1_bypass", anatop_base + 0x94, 19);
> -	hws[IMX8MP_SYS_PLL1_200M_CG] = imx_clk_hw_gate("sys_pll1_200m_cg", "sys_pll1_bypass", anatop_base + 0x94, 17);
> -	hws[IMX8MP_SYS_PLL1_266M_CG] = imx_clk_hw_gate("sys_pll1_266m_cg", "sys_pll1_bypass", anatop_base + 0x94, 15);
> -	hws[IMX8MP_SYS_PLL1_400M_CG] = imx_clk_hw_gate("sys_pll1_400m_cg", "sys_pll1_bypass", anatop_base + 0x94, 13);
>  	hws[IMX8MP_SYS_PLL1_OUT] = imx_clk_hw_gate("sys_pll1_out", "sys_pll1_bypass", anatop_base + 0x94, 11);
>  
> -	hws[IMX8MP_SYS_PLL1_40M] = imx_clk_hw_fixed_factor("sys_pll1_40m", "sys_pll1_40m_cg", 1, 20);
> -	hws[IMX8MP_SYS_PLL1_80M] = imx_clk_hw_fixed_factor("sys_pll1_80m", "sys_pll1_80m_cg", 1, 10);
> -	hws[IMX8MP_SYS_PLL1_100M] = imx_clk_hw_fixed_factor("sys_pll1_100m", "sys_pll1_100m_cg", 1, 8);
> -	hws[IMX8MP_SYS_PLL1_133M] = imx_clk_hw_fixed_factor("sys_pll1_133m", "sys_pll1_133m_cg", 1, 6);
> -	hws[IMX8MP_SYS_PLL1_160M] = imx_clk_hw_fixed_factor("sys_pll1_160m", "sys_pll1_160m_cg", 1, 5);
> -	hws[IMX8MP_SYS_PLL1_200M] = imx_clk_hw_fixed_factor("sys_pll1_200m", "sys_pll1_200m_cg", 1, 4);
> -	hws[IMX8MP_SYS_PLL1_266M] = imx_clk_hw_fixed_factor("sys_pll1_266m", "sys_pll1_266m_cg", 1, 3);
> -	hws[IMX8MP_SYS_PLL1_400M] = imx_clk_hw_fixed_factor("sys_pll1_400m", "sys_pll1_400m_cg", 1, 2);
> +	hws[IMX8MP_SYS_PLL1_40M] = imx_clk_hw_fixed_factor("sys_pll1_40m", "sys_pll1_out", 1, 20);
> +	hws[IMX8MP_SYS_PLL1_80M] = imx_clk_hw_fixed_factor("sys_pll1_80m", "sys_pll1_out", 1, 10);
> +	hws[IMX8MP_SYS_PLL1_100M] = imx_clk_hw_fixed_factor("sys_pll1_100m", "sys_pll1_out", 1, 8);
> +	hws[IMX8MP_SYS_PLL1_133M] = imx_clk_hw_fixed_factor("sys_pll1_133m", "sys_pll1_out", 1, 6);
> +	hws[IMX8MP_SYS_PLL1_160M] = imx_clk_hw_fixed_factor("sys_pll1_160m", "sys_pll1_out", 1, 5);
> +	hws[IMX8MP_SYS_PLL1_200M] = imx_clk_hw_fixed_factor("sys_pll1_200m", "sys_pll1_out", 1, 4);
> +	hws[IMX8MP_SYS_PLL1_266M] = imx_clk_hw_fixed_factor("sys_pll1_266m", "sys_pll1_out", 1, 3);
> +	hws[IMX8MP_SYS_PLL1_400M] = imx_clk_hw_fixed_factor("sys_pll1_400m", "sys_pll1_out", 1, 2);
>  	hws[IMX8MP_SYS_PLL1_800M] = imx_clk_hw_fixed_factor("sys_pll1_800m", "sys_pll1_out", 1, 1);
>  
> -	hws[IMX8MP_SYS_PLL2_50M_CG] = imx_clk_hw_gate("sys_pll2_50m_cg", "sys_pll2_bypass", anatop_base + 0x104, 27);
> -	hws[IMX8MP_SYS_PLL2_100M_CG] = imx_clk_hw_gate("sys_pll2_100m_cg", "sys_pll2_bypass", anatop_base + 0x104, 25);
> -	hws[IMX8MP_SYS_PLL2_125M_CG] = imx_clk_hw_gate("sys_pll2_125m_cg", "sys_pll2_bypass", anatop_base + 0x104, 23);
> -	hws[IMX8MP_SYS_PLL2_166M_CG] = imx_clk_hw_gate("sys_pll2_166m_cg", "sys_pll2_bypass", anatop_base + 0x104, 21);
> -	hws[IMX8MP_SYS_PLL2_200M_CG] = imx_clk_hw_gate("sys_pll2_200m_cg", "sys_pll2_bypass", anatop_base + 0x104, 19);
> -	hws[IMX8MP_SYS_PLL2_250M_CG] = imx_clk_hw_gate("sys_pll2_250m_cg", "sys_pll2_bypass", anatop_base + 0x104, 17);
> -	hws[IMX8MP_SYS_PLL2_333M_CG] = imx_clk_hw_gate("sys_pll2_333m_cg", "sys_pll2_bypass", anatop_base + 0x104, 15);
> -	hws[IMX8MP_SYS_PLL2_500M_CG] = imx_clk_hw_gate("sys_pll2_500m_cg", "sys_pll2_bypass", anatop_base + 0x104, 13);
>  	hws[IMX8MP_SYS_PLL2_OUT] = imx_clk_hw_gate("sys_pll2_out", "sys_pll2_bypass", anatop_base + 0x104, 11);
>  
> -	hws[IMX8MP_SYS_PLL2_50M] = imx_clk_hw_fixed_factor("sys_pll2_50m", "sys_pll2_50m_cg", 1, 20);
> -	hws[IMX8MP_SYS_PLL2_100M] = imx_clk_hw_fixed_factor("sys_pll2_100m", "sys_pll2_100m_cg", 1, 10);
> -	hws[IMX8MP_SYS_PLL2_125M] = imx_clk_hw_fixed_factor("sys_pll2_125m", "sys_pll2_125m_cg", 1, 8);
> -	hws[IMX8MP_SYS_PLL2_166M] = imx_clk_hw_fixed_factor("sys_pll2_166m", "sys_pll2_166m_cg", 1, 6);
> -	hws[IMX8MP_SYS_PLL2_200M] = imx_clk_hw_fixed_factor("sys_pll2_200m", "sys_pll2_200m_cg", 1, 5);
> -	hws[IMX8MP_SYS_PLL2_250M] = imx_clk_hw_fixed_factor("sys_pll2_250m", "sys_pll2_250m_cg", 1, 4);
> -	hws[IMX8MP_SYS_PLL2_333M] = imx_clk_hw_fixed_factor("sys_pll2_333m", "sys_pll2_333m_cg", 1, 3);
> -	hws[IMX8MP_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_500m_cg", 1, 2);
> +	hws[IMX8MP_SYS_PLL2_50M] = imx_clk_hw_fixed_factor("sys_pll2_50m", "sys_pll2_out", 1, 20);
> +	hws[IMX8MP_SYS_PLL2_100M] = imx_clk_hw_fixed_factor("sys_pll2_100m", "sys_pll2_out", 1, 10);
> +	hws[IMX8MP_SYS_PLL2_125M] = imx_clk_hw_fixed_factor("sys_pll2_125m", "sys_pll2_out", 1, 8);
> +	hws[IMX8MP_SYS_PLL2_166M] = imx_clk_hw_fixed_factor("sys_pll2_166m", "sys_pll2_out", 1, 6);
> +	hws[IMX8MP_SYS_PLL2_200M] = imx_clk_hw_fixed_factor("sys_pll2_200m", "sys_pll2_out", 1, 5);
> +	hws[IMX8MP_SYS_PLL2_250M] = imx_clk_hw_fixed_factor("sys_pll2_250m", "sys_pll2_out", 1, 4);
> +	hws[IMX8MP_SYS_PLL2_333M] = imx_clk_hw_fixed_factor("sys_pll2_333m", "sys_pll2_out", 1, 3);
> +	hws[IMX8MP_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_out", 1, 2);
>  	hws[IMX8MP_SYS_PLL2_1000M] = imx_clk_hw_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1);
>  
>  	hws[IMX8MP_CLK_A53_DIV] = imx8m_clk_hw_composite_core("arm_a53_div", imx8mp_a53_sels, ccm_base + 0x8000);
> -- 
> 2.25.1
>

WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: sboyd@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH 3/3] clk: imx8mp: remove SYS PLL 1/2 clock gates
Date: Fri, 25 Feb 2022 16:35:13 +0200	[thread overview]
Message-ID: <YhjpIbIVf7DQh/Ja@abelvesa> (raw)
In-Reply-To: <20220225081733.2294166-4-peng.fan@oss.nxp.com>

On 22-02-25 16:17:33, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Remove the PLL 1/2 gates as it make AMP clock management harder without
> obvious benifit.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/clk/imx/clk-imx8mp.c | 48 ++++++++++++------------------------
>  1 file changed, 16 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
> index f23b92906d3b..18f5b7c3ca9d 100644
> --- a/drivers/clk/imx/clk-imx8mp.c
> +++ b/drivers/clk/imx/clk-imx8mp.c
> @@ -480,44 +480,28 @@ static int imx8mp_clocks_probe(struct platform_device *pdev)
>  	hws[IMX8MP_ARM_PLL_OUT] = imx_clk_hw_gate("arm_pll_out", "arm_pll_bypass", anatop_base + 0x84, 11);
>  	hws[IMX8MP_SYS_PLL3_OUT] = imx_clk_hw_gate("sys_pll3_out", "sys_pll3_bypass", anatop_base + 0x114, 11);
>  
> -	hws[IMX8MP_SYS_PLL1_40M_CG] = imx_clk_hw_gate("sys_pll1_40m_cg", "sys_pll1_bypass", anatop_base + 0x94, 27);

Hmm, isn't there a chance that u-boot might gate these? Then, in kernel
you won't have a way to ungate them, leaving the consumers hanging.

> -	hws[IMX8MP_SYS_PLL1_80M_CG] = imx_clk_hw_gate("sys_pll1_80m_cg", "sys_pll1_bypass", anatop_base + 0x94, 25);
> -	hws[IMX8MP_SYS_PLL1_100M_CG] = imx_clk_hw_gate("sys_pll1_100m_cg", "sys_pll1_bypass", anatop_base + 0x94, 23);
> -	hws[IMX8MP_SYS_PLL1_133M_CG] = imx_clk_hw_gate("sys_pll1_133m_cg", "sys_pll1_bypass", anatop_base + 0x94, 21);
> -	hws[IMX8MP_SYS_PLL1_160M_CG] = imx_clk_hw_gate("sys_pll1_160m_cg", "sys_pll1_bypass", anatop_base + 0x94, 19);
> -	hws[IMX8MP_SYS_PLL1_200M_CG] = imx_clk_hw_gate("sys_pll1_200m_cg", "sys_pll1_bypass", anatop_base + 0x94, 17);
> -	hws[IMX8MP_SYS_PLL1_266M_CG] = imx_clk_hw_gate("sys_pll1_266m_cg", "sys_pll1_bypass", anatop_base + 0x94, 15);
> -	hws[IMX8MP_SYS_PLL1_400M_CG] = imx_clk_hw_gate("sys_pll1_400m_cg", "sys_pll1_bypass", anatop_base + 0x94, 13);
>  	hws[IMX8MP_SYS_PLL1_OUT] = imx_clk_hw_gate("sys_pll1_out", "sys_pll1_bypass", anatop_base + 0x94, 11);
>  
> -	hws[IMX8MP_SYS_PLL1_40M] = imx_clk_hw_fixed_factor("sys_pll1_40m", "sys_pll1_40m_cg", 1, 20);
> -	hws[IMX8MP_SYS_PLL1_80M] = imx_clk_hw_fixed_factor("sys_pll1_80m", "sys_pll1_80m_cg", 1, 10);
> -	hws[IMX8MP_SYS_PLL1_100M] = imx_clk_hw_fixed_factor("sys_pll1_100m", "sys_pll1_100m_cg", 1, 8);
> -	hws[IMX8MP_SYS_PLL1_133M] = imx_clk_hw_fixed_factor("sys_pll1_133m", "sys_pll1_133m_cg", 1, 6);
> -	hws[IMX8MP_SYS_PLL1_160M] = imx_clk_hw_fixed_factor("sys_pll1_160m", "sys_pll1_160m_cg", 1, 5);
> -	hws[IMX8MP_SYS_PLL1_200M] = imx_clk_hw_fixed_factor("sys_pll1_200m", "sys_pll1_200m_cg", 1, 4);
> -	hws[IMX8MP_SYS_PLL1_266M] = imx_clk_hw_fixed_factor("sys_pll1_266m", "sys_pll1_266m_cg", 1, 3);
> -	hws[IMX8MP_SYS_PLL1_400M] = imx_clk_hw_fixed_factor("sys_pll1_400m", "sys_pll1_400m_cg", 1, 2);
> +	hws[IMX8MP_SYS_PLL1_40M] = imx_clk_hw_fixed_factor("sys_pll1_40m", "sys_pll1_out", 1, 20);
> +	hws[IMX8MP_SYS_PLL1_80M] = imx_clk_hw_fixed_factor("sys_pll1_80m", "sys_pll1_out", 1, 10);
> +	hws[IMX8MP_SYS_PLL1_100M] = imx_clk_hw_fixed_factor("sys_pll1_100m", "sys_pll1_out", 1, 8);
> +	hws[IMX8MP_SYS_PLL1_133M] = imx_clk_hw_fixed_factor("sys_pll1_133m", "sys_pll1_out", 1, 6);
> +	hws[IMX8MP_SYS_PLL1_160M] = imx_clk_hw_fixed_factor("sys_pll1_160m", "sys_pll1_out", 1, 5);
> +	hws[IMX8MP_SYS_PLL1_200M] = imx_clk_hw_fixed_factor("sys_pll1_200m", "sys_pll1_out", 1, 4);
> +	hws[IMX8MP_SYS_PLL1_266M] = imx_clk_hw_fixed_factor("sys_pll1_266m", "sys_pll1_out", 1, 3);
> +	hws[IMX8MP_SYS_PLL1_400M] = imx_clk_hw_fixed_factor("sys_pll1_400m", "sys_pll1_out", 1, 2);
>  	hws[IMX8MP_SYS_PLL1_800M] = imx_clk_hw_fixed_factor("sys_pll1_800m", "sys_pll1_out", 1, 1);
>  
> -	hws[IMX8MP_SYS_PLL2_50M_CG] = imx_clk_hw_gate("sys_pll2_50m_cg", "sys_pll2_bypass", anatop_base + 0x104, 27);
> -	hws[IMX8MP_SYS_PLL2_100M_CG] = imx_clk_hw_gate("sys_pll2_100m_cg", "sys_pll2_bypass", anatop_base + 0x104, 25);
> -	hws[IMX8MP_SYS_PLL2_125M_CG] = imx_clk_hw_gate("sys_pll2_125m_cg", "sys_pll2_bypass", anatop_base + 0x104, 23);
> -	hws[IMX8MP_SYS_PLL2_166M_CG] = imx_clk_hw_gate("sys_pll2_166m_cg", "sys_pll2_bypass", anatop_base + 0x104, 21);
> -	hws[IMX8MP_SYS_PLL2_200M_CG] = imx_clk_hw_gate("sys_pll2_200m_cg", "sys_pll2_bypass", anatop_base + 0x104, 19);
> -	hws[IMX8MP_SYS_PLL2_250M_CG] = imx_clk_hw_gate("sys_pll2_250m_cg", "sys_pll2_bypass", anatop_base + 0x104, 17);
> -	hws[IMX8MP_SYS_PLL2_333M_CG] = imx_clk_hw_gate("sys_pll2_333m_cg", "sys_pll2_bypass", anatop_base + 0x104, 15);
> -	hws[IMX8MP_SYS_PLL2_500M_CG] = imx_clk_hw_gate("sys_pll2_500m_cg", "sys_pll2_bypass", anatop_base + 0x104, 13);
>  	hws[IMX8MP_SYS_PLL2_OUT] = imx_clk_hw_gate("sys_pll2_out", "sys_pll2_bypass", anatop_base + 0x104, 11);
>  
> -	hws[IMX8MP_SYS_PLL2_50M] = imx_clk_hw_fixed_factor("sys_pll2_50m", "sys_pll2_50m_cg", 1, 20);
> -	hws[IMX8MP_SYS_PLL2_100M] = imx_clk_hw_fixed_factor("sys_pll2_100m", "sys_pll2_100m_cg", 1, 10);
> -	hws[IMX8MP_SYS_PLL2_125M] = imx_clk_hw_fixed_factor("sys_pll2_125m", "sys_pll2_125m_cg", 1, 8);
> -	hws[IMX8MP_SYS_PLL2_166M] = imx_clk_hw_fixed_factor("sys_pll2_166m", "sys_pll2_166m_cg", 1, 6);
> -	hws[IMX8MP_SYS_PLL2_200M] = imx_clk_hw_fixed_factor("sys_pll2_200m", "sys_pll2_200m_cg", 1, 5);
> -	hws[IMX8MP_SYS_PLL2_250M] = imx_clk_hw_fixed_factor("sys_pll2_250m", "sys_pll2_250m_cg", 1, 4);
> -	hws[IMX8MP_SYS_PLL2_333M] = imx_clk_hw_fixed_factor("sys_pll2_333m", "sys_pll2_333m_cg", 1, 3);
> -	hws[IMX8MP_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_500m_cg", 1, 2);
> +	hws[IMX8MP_SYS_PLL2_50M] = imx_clk_hw_fixed_factor("sys_pll2_50m", "sys_pll2_out", 1, 20);
> +	hws[IMX8MP_SYS_PLL2_100M] = imx_clk_hw_fixed_factor("sys_pll2_100m", "sys_pll2_out", 1, 10);
> +	hws[IMX8MP_SYS_PLL2_125M] = imx_clk_hw_fixed_factor("sys_pll2_125m", "sys_pll2_out", 1, 8);
> +	hws[IMX8MP_SYS_PLL2_166M] = imx_clk_hw_fixed_factor("sys_pll2_166m", "sys_pll2_out", 1, 6);
> +	hws[IMX8MP_SYS_PLL2_200M] = imx_clk_hw_fixed_factor("sys_pll2_200m", "sys_pll2_out", 1, 5);
> +	hws[IMX8MP_SYS_PLL2_250M] = imx_clk_hw_fixed_factor("sys_pll2_250m", "sys_pll2_out", 1, 4);
> +	hws[IMX8MP_SYS_PLL2_333M] = imx_clk_hw_fixed_factor("sys_pll2_333m", "sys_pll2_out", 1, 3);
> +	hws[IMX8MP_SYS_PLL2_500M] = imx_clk_hw_fixed_factor("sys_pll2_500m", "sys_pll2_out", 1, 2);
>  	hws[IMX8MP_SYS_PLL2_1000M] = imx_clk_hw_fixed_factor("sys_pll2_1000m", "sys_pll2_out", 1, 1);
>  
>  	hws[IMX8MP_CLK_A53_DIV] = imx8m_clk_hw_composite_core("arm_a53_div", imx8mp_a53_sels, ccm_base + 0x8000);
> -- 
> 2.25.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-02-25 14:35 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-25  8:17 [PATCH 0/3] clk: imx8m: remote sys pll1/2 clk gates Peng Fan (OSS)
2022-02-25  8:17 ` Peng Fan (OSS)
2022-02-25  8:17 ` [PATCH 1/3] clk: imx8mm: remove SYS PLL 1/2 clock gates Peng Fan (OSS)
2022-02-25  8:17   ` Peng Fan (OSS)
2022-02-25  8:17 ` [PATCH 2/3] clk: imx8mn: " Peng Fan (OSS)
2022-02-25  8:17   ` Peng Fan (OSS)
2022-02-25  8:17 ` [PATCH 3/3] clk: imx8mp: " Peng Fan (OSS)
2022-02-25  8:17   ` Peng Fan (OSS)
2022-02-25 14:35   ` Abel Vesa [this message]
2022-02-25 14:35     ` Abel Vesa
2022-02-28  0:39     ` Peng Fan
2022-02-28  0:39       ` Peng Fan
2022-02-28 12:23       ` Abel Vesa
2022-02-28 12:23         ` Abel Vesa
2022-02-28 12:23 ` [PATCH 0/3] clk: imx8m: remote sys pll1/2 clk gates Abel Vesa
2022-02-28 12:23   ` Abel Vesa
2022-03-04  8:50 ` Abel Vesa
2022-03-04  8:50   ` Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YhjpIbIVf7DQh/Ja@abelvesa \
    --to=abel.vesa@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.