All of lore.kernel.org
 help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: sboyd@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH 1/2] clk: imx: add mcore_booted boot paratemter
Date: Mon, 28 Feb 2022 11:49:12 +0200	[thread overview]
Message-ID: <YhyamBQWfY+2LOWF@abelvesa> (raw)
In-Reply-To: <20220228061150.3006113-1-peng.fan@oss.nxp.com>

On 22-02-28 14:11:49, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add mcore_booted boot parameter which could simplify AMP clock
> management. To i.MX8M, there is CCM(clock control Module) to generate
> clock root clock, anatop(analog PLL module) to generate PLL, and CCGR
> (clock gating) to gate clocks to peripherals. As below:
>   anatop->ccm->ccgr->peripheral
> 
> Linux handles the clock management and the auxiliary core is under
> control of Linux. Although there is per hardware domain control for CCGR
> and CCM, auxiliary core normally only use CCGR hardware domain control
> to avoid linux gate off the clk to peripherals and leave CCM ana anatop
> to Linux.
> 
> Per NXP hardware design, because CCGR already support gate to
> peripherals, and clk root gate power leakage is negligible. So
> when in AMP case, we could not register the clk root gate.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/clk/imx/clk.c | 9 +++++++++
>  drivers/clk/imx/clk.h | 1 +
>  2 files changed, 10 insertions(+)
> 
> diff --git a/drivers/clk/imx/clk.c b/drivers/clk/imx/clk.c
> index 7cc669934253..5d3ac59b382b 100644
> --- a/drivers/clk/imx/clk.c
> +++ b/drivers/clk/imx/clk.c
> @@ -146,6 +146,15 @@ void imx_cscmr1_fixup(u32 *val)
>  	return;
>  }
>  
> +bool mcore_booted;
> +
> +static int __init setup_mcore_booted(char *booted)
> +{
> +	mcore_booted = true;
> +	return 1;
> +}
> +__setup("mcore_booted", setup_mcore_booted);

Lets give module_param a try first, as discussed.

Thanks.

> +
>  #ifndef MODULE
>  
>  static bool imx_keep_uart_clocks;
> diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
> index a7cbbcd1a3f4..5061a06468df 100644
> --- a/drivers/clk/imx/clk.h
> +++ b/drivers/clk/imx/clk.h
> @@ -7,6 +7,7 @@
>  #include <linux/clk-provider.h>
>  
>  extern spinlock_t imx_ccm_lock;
> +extern bool mcore_booted;
>  
>  void imx_check_clocks(struct clk *clks[], unsigned int count);
>  void imx_check_clk_hws(struct clk_hw *clks[], unsigned int count);
> -- 
> 2.25.1
>

WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: sboyd@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH 1/2] clk: imx: add mcore_booted boot paratemter
Date: Mon, 28 Feb 2022 11:49:12 +0200	[thread overview]
Message-ID: <YhyamBQWfY+2LOWF@abelvesa> (raw)
In-Reply-To: <20220228061150.3006113-1-peng.fan@oss.nxp.com>

On 22-02-28 14:11:49, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Add mcore_booted boot parameter which could simplify AMP clock
> management. To i.MX8M, there is CCM(clock control Module) to generate
> clock root clock, anatop(analog PLL module) to generate PLL, and CCGR
> (clock gating) to gate clocks to peripherals. As below:
>   anatop->ccm->ccgr->peripheral
> 
> Linux handles the clock management and the auxiliary core is under
> control of Linux. Although there is per hardware domain control for CCGR
> and CCM, auxiliary core normally only use CCGR hardware domain control
> to avoid linux gate off the clk to peripherals and leave CCM ana anatop
> to Linux.
> 
> Per NXP hardware design, because CCGR already support gate to
> peripherals, and clk root gate power leakage is negligible. So
> when in AMP case, we could not register the clk root gate.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/clk/imx/clk.c | 9 +++++++++
>  drivers/clk/imx/clk.h | 1 +
>  2 files changed, 10 insertions(+)
> 
> diff --git a/drivers/clk/imx/clk.c b/drivers/clk/imx/clk.c
> index 7cc669934253..5d3ac59b382b 100644
> --- a/drivers/clk/imx/clk.c
> +++ b/drivers/clk/imx/clk.c
> @@ -146,6 +146,15 @@ void imx_cscmr1_fixup(u32 *val)
>  	return;
>  }
>  
> +bool mcore_booted;
> +
> +static int __init setup_mcore_booted(char *booted)
> +{
> +	mcore_booted = true;
> +	return 1;
> +}
> +__setup("mcore_booted", setup_mcore_booted);

Lets give module_param a try first, as discussed.

Thanks.

> +
>  #ifndef MODULE
>  
>  static bool imx_keep_uart_clocks;
> diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
> index a7cbbcd1a3f4..5061a06468df 100644
> --- a/drivers/clk/imx/clk.h
> +++ b/drivers/clk/imx/clk.h
> @@ -7,6 +7,7 @@
>  #include <linux/clk-provider.h>
>  
>  extern spinlock_t imx_ccm_lock;
> +extern bool mcore_booted;
>  
>  void imx_check_clocks(struct clk *clks[], unsigned int count);
>  void imx_check_clk_hws(struct clk_hw *clks[], unsigned int count);
> -- 
> 2.25.1
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-02-28  9:49 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-28  6:11 [PATCH 1/2] clk: imx: add mcore_booted boot paratemter Peng Fan (OSS)
2022-02-28  6:11 ` Peng Fan (OSS)
2022-02-28  6:11 ` [PATCH 2/2] clk: imx8m: check mcore_booted before register clk Peng Fan (OSS)
2022-02-28  6:11   ` Peng Fan (OSS)
2022-02-28  9:49 ` Abel Vesa [this message]
2022-02-28  9:49   ` [PATCH 1/2] clk: imx: add mcore_booted boot paratemter Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YhyamBQWfY+2LOWF@abelvesa \
    --to=abel.vesa@nxp.com \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.