From: Rob Herring <robh@kernel.org>
To: Alexandre Bailon <abailon@baylibre.com>
Cc: ohad@wizery.com, bjorn.andersson@linaro.org,
mathieu.poirier@linaro.org, robh+dt@kernel.or,
matthias.bgg@gmail.com, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
stephane.leprovost@mediatek.com, khilman@baylibre.com
Subject: Re: [PATCH v4 1/7] dt bindings: remoteproc: Add bindings for the MT8183 APU
Date: Mon, 7 Mar 2022 17:13:10 -0600 [thread overview]
Message-ID: <YiaRhu+tSg7+ZH16@robh.at.kernel.org> (raw)
In-Reply-To: <20220304161514.994128-2-abailon@baylibre.com>
On Fri, Mar 04, 2022 at 05:15:08PM +0100, Alexandre Bailon wrote:
> This adds dt bindings for the APU present in the MT8183.
>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
> .../bindings/remoteproc/mtk,apu.yaml | 122 ++++++++++++++++++
> 1 file changed, 122 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> new file mode 100644
> index 000000000000..b640aa96d678
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +
> +---
> +$id: "http://devicetree.org/schemas/remoteproc/mtk,apu.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Mediatek AI Processor Unit (APU)
> +
> +description:
> + This document defines the binding for the APU, a co-processor that could
> + offload the CPU for machine learning and neural network.
> +
> +maintainers:
> + - Alexandre Bailon <abailon@bayLibre.com>
> +
> +properties:
> + compatible:
> + const: mediatek,mt8183-apu
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + minItems: 3
> + maxItems: 3
> +
> + clock-names:
> + items:
> + - const: axi
> + - const: ipu
> + - const: jtag
> +
> + iommus:
> + maxItems: 3
> +
> + memory-region:
> + maxItems: 3
> +
> + memory-region-da:
> + description:
> + Array of APU device address. This is used to map the APU device address
> + to a physical address.
> + maxItems: 3
'dma-ranges' should work for this.
> +
> + power-domains:
> + maxItems: 1
> +
> + pinctrl:
> + description: pinctrl handles, required to configure pins for JTAG.
> +
> + pinctrl-names:
> + items:
> + - const: jtag
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - iommus
> + - memory-region
> + - memory-region-da
> + - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8183-clk.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/memory/mt8183-larb-port.h>
> + #include <dt-bindings/power/mt8183-power.h>
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vdev0buffer: vdev0buffer@52900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52900000 0x4000>;
> + no-map;
> + };
> +
> + vdev0vring0: vdev0vring0@52904000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52904000 0x2000>;
> + no-map;
> + };
> +
> + vdev0vring1: vdev0vring1@52906000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52906000 0x2000>;
> + no-map;
> + };
> + };
> +
> + apu0: apu@19100000 {
> + compatible = "mediatek,mt8183-apu";
> + reg = <0x19180000 0x14000>;
> + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_LOW>;
> +
> + iommus = <&iommu M4U_PORT_IMG_IPUO>,
> + <&iommu M4U_PORT_IMG_IPU3O>,
> + <&iommu M4U_PORT_IMG_IPUI>;
> +
> + clocks = <&ipu_core0 CLK_IPU_CORE0_AXI>,
> + <&ipu_core0 CLK_IPU_CORE0_IPU>,
> + <&ipu_core0 CLK_IPU_CORE0_JTAG>;
> +
> + clock-names = "axi", "ipu", "jtag";
> +
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_VPU_CORE0>;
> + memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>;
> + memory-region-da = <0x6fff8000>, <0x6fffc000>, <0x6fffe000>;
> + };
> +...
> --
> 2.34.1
>
>
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Alexandre Bailon <abailon@baylibre.com>
Cc: ohad@wizery.com, bjorn.andersson@linaro.org,
mathieu.poirier@linaro.org, robh+dt@kernel.or,
matthias.bgg@gmail.com, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
stephane.leprovost@mediatek.com, khilman@baylibre.com
Subject: Re: [PATCH v4 1/7] dt bindings: remoteproc: Add bindings for the MT8183 APU
Date: Mon, 7 Mar 2022 17:13:10 -0600 [thread overview]
Message-ID: <YiaRhu+tSg7+ZH16@robh.at.kernel.org> (raw)
In-Reply-To: <20220304161514.994128-2-abailon@baylibre.com>
On Fri, Mar 04, 2022 at 05:15:08PM +0100, Alexandre Bailon wrote:
> This adds dt bindings for the APU present in the MT8183.
>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
> .../bindings/remoteproc/mtk,apu.yaml | 122 ++++++++++++++++++
> 1 file changed, 122 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> new file mode 100644
> index 000000000000..b640aa96d678
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +
> +---
> +$id: "http://devicetree.org/schemas/remoteproc/mtk,apu.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Mediatek AI Processor Unit (APU)
> +
> +description:
> + This document defines the binding for the APU, a co-processor that could
> + offload the CPU for machine learning and neural network.
> +
> +maintainers:
> + - Alexandre Bailon <abailon@bayLibre.com>
> +
> +properties:
> + compatible:
> + const: mediatek,mt8183-apu
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + minItems: 3
> + maxItems: 3
> +
> + clock-names:
> + items:
> + - const: axi
> + - const: ipu
> + - const: jtag
> +
> + iommus:
> + maxItems: 3
> +
> + memory-region:
> + maxItems: 3
> +
> + memory-region-da:
> + description:
> + Array of APU device address. This is used to map the APU device address
> + to a physical address.
> + maxItems: 3
'dma-ranges' should work for this.
> +
> + power-domains:
> + maxItems: 1
> +
> + pinctrl:
> + description: pinctrl handles, required to configure pins for JTAG.
> +
> + pinctrl-names:
> + items:
> + - const: jtag
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - iommus
> + - memory-region
> + - memory-region-da
> + - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8183-clk.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/memory/mt8183-larb-port.h>
> + #include <dt-bindings/power/mt8183-power.h>
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vdev0buffer: vdev0buffer@52900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52900000 0x4000>;
> + no-map;
> + };
> +
> + vdev0vring0: vdev0vring0@52904000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52904000 0x2000>;
> + no-map;
> + };
> +
> + vdev0vring1: vdev0vring1@52906000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52906000 0x2000>;
> + no-map;
> + };
> + };
> +
> + apu0: apu@19100000 {
> + compatible = "mediatek,mt8183-apu";
> + reg = <0x19180000 0x14000>;
> + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_LOW>;
> +
> + iommus = <&iommu M4U_PORT_IMG_IPUO>,
> + <&iommu M4U_PORT_IMG_IPU3O>,
> + <&iommu M4U_PORT_IMG_IPUI>;
> +
> + clocks = <&ipu_core0 CLK_IPU_CORE0_AXI>,
> + <&ipu_core0 CLK_IPU_CORE0_IPU>,
> + <&ipu_core0 CLK_IPU_CORE0_JTAG>;
> +
> + clock-names = "axi", "ipu", "jtag";
> +
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_VPU_CORE0>;
> + memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>;
> + memory-region-da = <0x6fff8000>, <0x6fffc000>, <0x6fffe000>;
> + };
> +...
> --
> 2.34.1
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Alexandre Bailon <abailon@baylibre.com>
Cc: ohad@wizery.com, bjorn.andersson@linaro.org,
mathieu.poirier@linaro.org, robh+dt@kernel.or,
matthias.bgg@gmail.com, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
stephane.leprovost@mediatek.com, khilman@baylibre.com
Subject: Re: [PATCH v4 1/7] dt bindings: remoteproc: Add bindings for the MT8183 APU
Date: Mon, 7 Mar 2022 17:13:10 -0600 [thread overview]
Message-ID: <YiaRhu+tSg7+ZH16@robh.at.kernel.org> (raw)
In-Reply-To: <20220304161514.994128-2-abailon@baylibre.com>
On Fri, Mar 04, 2022 at 05:15:08PM +0100, Alexandre Bailon wrote:
> This adds dt bindings for the APU present in the MT8183.
>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
> .../bindings/remoteproc/mtk,apu.yaml | 122 ++++++++++++++++++
> 1 file changed, 122 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> new file mode 100644
> index 000000000000..b640aa96d678
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +
> +---
> +$id: "http://devicetree.org/schemas/remoteproc/mtk,apu.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Mediatek AI Processor Unit (APU)
> +
> +description:
> + This document defines the binding for the APU, a co-processor that could
> + offload the CPU for machine learning and neural network.
> +
> +maintainers:
> + - Alexandre Bailon <abailon@bayLibre.com>
> +
> +properties:
> + compatible:
> + const: mediatek,mt8183-apu
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + minItems: 3
> + maxItems: 3
> +
> + clock-names:
> + items:
> + - const: axi
> + - const: ipu
> + - const: jtag
> +
> + iommus:
> + maxItems: 3
> +
> + memory-region:
> + maxItems: 3
> +
> + memory-region-da:
> + description:
> + Array of APU device address. This is used to map the APU device address
> + to a physical address.
> + maxItems: 3
'dma-ranges' should work for this.
> +
> + power-domains:
> + maxItems: 1
> +
> + pinctrl:
> + description: pinctrl handles, required to configure pins for JTAG.
> +
> + pinctrl-names:
> + items:
> + - const: jtag
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - iommus
> + - memory-region
> + - memory-region-da
> + - power-domains
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8183-clk.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/memory/mt8183-larb-port.h>
> + #include <dt-bindings/power/mt8183-power.h>
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vdev0buffer: vdev0buffer@52900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52900000 0x4000>;
> + no-map;
> + };
> +
> + vdev0vring0: vdev0vring0@52904000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52904000 0x2000>;
> + no-map;
> + };
> +
> + vdev0vring1: vdev0vring1@52906000 {
> + compatible = "shared-dma-pool";
> + reg = <0x52906000 0x2000>;
> + no-map;
> + };
> + };
> +
> + apu0: apu@19100000 {
> + compatible = "mediatek,mt8183-apu";
> + reg = <0x19180000 0x14000>;
> + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_LOW>;
> +
> + iommus = <&iommu M4U_PORT_IMG_IPUO>,
> + <&iommu M4U_PORT_IMG_IPU3O>,
> + <&iommu M4U_PORT_IMG_IPUI>;
> +
> + clocks = <&ipu_core0 CLK_IPU_CORE0_AXI>,
> + <&ipu_core0 CLK_IPU_CORE0_IPU>,
> + <&ipu_core0 CLK_IPU_CORE0_JTAG>;
> +
> + clock-names = "axi", "ipu", "jtag";
> +
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_VPU_CORE0>;
> + memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>;
> + memory-region-da = <0x6fff8000>, <0x6fffc000>, <0x6fffe000>;
> + };
> +...
> --
> 2.34.1
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-03-07 23:13 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-04 16:15 [PATCH v4 0/7] Add support of mt8183 APU Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-04 16:15 ` [PATCH v4 1/7] dt bindings: remoteproc: Add bindings for the MT8183 APU Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-07 23:13 ` Rob Herring [this message]
2022-03-07 23:13 ` Rob Herring
2022-03-07 23:13 ` Rob Herring
2022-03-04 16:15 ` [PATCH v4 2/7] dt-bindings: remoteproc: Add bindings for the MT8365 APU Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-07 23:15 ` Rob Herring
2022-03-07 23:15 ` Rob Herring
2022-03-07 23:15 ` Rob Herring
2022-03-04 16:15 ` [PATCH v4 3/7] remoteproc: Add a remoteproc driver for the MT8183's APU Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-14 22:02 ` Bjorn Andersson
2022-03-14 22:02 ` Bjorn Andersson
2022-03-14 22:02 ` Bjorn Andersson
2022-03-04 16:15 ` [PATCH v4 4/7] remoteproc: mtk_apu: Add support of JTAG Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-14 22:24 ` Bjorn Andersson
2022-03-14 22:24 ` Bjorn Andersson
2022-03-14 22:24 ` Bjorn Andersson
2022-03-04 16:15 ` [PATCH v4 5/7] remoteproc: mtk_apu: Use match_data Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-14 22:27 ` Bjorn Andersson
2022-03-14 22:27 ` Bjorn Andersson
2022-03-14 22:27 ` Bjorn Andersson
2022-03-04 16:15 ` [PATCH v4 6/7] remoteproc: mtk-apu: Add support of MT8365 Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-14 22:28 ` Bjorn Andersson
2022-03-14 22:28 ` Bjorn Andersson
2022-03-14 22:28 ` Bjorn Andersson
2022-03-04 16:15 ` [PATCH v4 7/7] ARM64: mt8183: Add support of APU to mt8183 Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
2022-03-04 16:15 ` Alexandre Bailon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YiaRhu+tSg7+ZH16@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=abailon@baylibre.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=matthias.bgg@gmail.com \
--cc=ohad@wizery.com \
--cc=robh+dt@kernel.or \
--cc=stephane.leprovost@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.