[PATCH V2] arm64: dts: qcom: sc7280: Enable gcc HW reset

[PATCH V2] arm64: dts: qcom: sc7280: Enable gcc HW reset

[Shaik Sajida Bhanu]

Enable gcc HW reset for eMMC and SD card.

Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
---

Changes since V1:
	- Updated commit message, subject and comments in dtsi file as
	  suggested by Krzysztof Kozlowski.
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index c07765d..721abf5 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -881,6 +881,9 @@
 			mmc-hs400-1_8v;
 			mmc-hs400-enhanced-strobe;
 
+			/* Add gcc hw reset dt entry for eMMC */
+			resets = <&gcc GCC_SDCC1_BCR>;
+			reset-names = "core_reset";
 			sdhc1_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -2686,6 +2689,9 @@
 
 			qcom,dll-config = <0x0007642c>;
 
+			/* Add gcc hw reset dt entry for SD card */
+			resets = <&gcc GCC_SDCC2_BCR>;
+			reset-names = "core_reset";
 			sdhc2_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH V2] arm64: dts: qcom: sc7280: Enable gcc HW reset

[Bjorn Andersson]

On Thu 10 Mar 06:45 PST 2022, Shaik Sajida Bhanu wrote:

Without looking at what Krzysztof suggested, I think $subject should
reflect the fact that it's the reset of the two SDCC controllers that
you're adding.

Something like "arm64: dts:qcom: Add resets for SDCC controllers" would allow me to grasp the full
purpose of the patch by only reading the subject.

> Enable gcc HW reset for eMMC and SD card.
> 
> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
> ---
> 
> Changes since V1:
> 	- Updated commit message, subject and comments in dtsi file as
> 	  suggested by Krzysztof Kozlowski.
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index c07765d..721abf5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -881,6 +881,9 @@
>  			mmc-hs400-1_8v;
>  			mmc-hs400-enhanced-strobe;
>  
> +			/* Add gcc hw reset dt entry for eMMC */

When you read this comment 2 weeks from now it won't add any value.

> +			resets = <&gcc GCC_SDCC1_BCR>;
> +			reset-names = "core_reset";

Doesn't seem that this binding has been converted to YAML, but the .txt
binding doesn't mention "resets" and I don't see a reason for having a
reset-names for a single reset.

And please keep the empty line before the opp-table.

Regards,
Bjorn

>  			sdhc1_opp_table: opp-table {
>  				compatible = "operating-points-v2";
>  
> @@ -2686,6 +2689,9 @@
>  
>  			qcom,dll-config = <0x0007642c>;
>  
> +			/* Add gcc hw reset dt entry for SD card */
> +			resets = <&gcc GCC_SDCC2_BCR>;
> +			reset-names = "core_reset";
>  			sdhc2_opp_table: opp-table {
>  				compatible = "operating-points-v2";
>  
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
> 

RE: [PATCH V2] arm64: dts: qcom: sc7280: Enable gcc HW reset

[Sajida Bhanu (Temp) (QUIC)]

Hi,

Thanks for the review.

Please find the inline comments.

Thanks,
Sajida
> -----Original Message-----
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> Sent: Friday, March 11, 2022 9:26 AM
> To: Sajida Bhanu (Temp) (QUIC) <quic_c_sbhanu@quicinc.com>
> Cc: krzk+dt@kernel.org; agross@kernel.org; robh+dt@kernel.org; linux-arm-
> msm@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; Asutosh Das (QUIC) <quic_asutoshd@quicinc.com>;
> Ram Prakash Gupta (QUIC) <quic_rampraka@quicinc.com>; Pradeep
> Pragallapati (QUIC) <quic_pragalla@quicinc.com>; Sarthak Garg (QUIC)
> <quic_sartgarg@quicinc.com>; Nitin Rawat (QUIC)
> <quic_nitirawa@quicinc.com>; Sayali Lokhande (QUIC)
> <quic_sayalil@quicinc.com>
> Subject: Re: [PATCH V2] arm64: dts: qcom: sc7280: Enable gcc HW reset
> 
> On Thu 10 Mar 06:45 PST 2022, Shaik Sajida Bhanu wrote:
> 
> Without looking at what Krzysztof suggested, I think $subject should reflect
> the fact that it's the reset of the two SDCC controllers that you're adding.
> 
> Something like "arm64: dts:qcom: Add resets for SDCC controllers" would
> allow me to grasp the full purpose of the patch by only reading the subject.
Ok Sure 
> 
> > Enable gcc HW reset for eMMC and SD card.
> >
> > Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com>
> > ---
> >
> > Changes since V1:
> > 	- Updated commit message, subject and comments in dtsi file as
> > 	  suggested by Krzysztof Kozlowski.
> > ---
> >  arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++++++
> >  1 file changed, 6 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > index c07765d..721abf5 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > @@ -881,6 +881,9 @@
> >  			mmc-hs400-1_8v;
> >  			mmc-hs400-enhanced-strobe;
> >
> > +			/* Add gcc hw reset dt entry for eMMC */
> 
> When you read this comment 2 weeks from now it won't add any value.
Ok will update the comment.
> 
> > +			resets = <&gcc GCC_SDCC1_BCR>;
> > +			reset-names = "core_reset";
> 
> Doesn't seem that this binding has been converted to YAML, but the .txt
> binding doesn't mention "resets" and I don't see a reason for having a reset-
> names for a single reset.
> 
Thanks for the pointing, I will add resets entry in dt-bindings in next patch version.
Just followed existing node formats:
         Ex: 
                resets = <&gcc GCC_PCIE_1_BCR>;
                 reset-names = "pci";

> And please keep the empty line before the opp-table.
Sure
> 
> Regards,
> Bjorn
> 
> >  			sdhc1_opp_table: opp-table {
> >  				compatible = "operating-points-v2";
> >
> > @@ -2686,6 +2689,9 @@
> >
> >  			qcom,dll-config = <0x0007642c>;
> >
> > +			/* Add gcc hw reset dt entry for SD card */
> > +			resets = <&gcc GCC_SDCC2_BCR>;
> > +			reset-names = "core_reset";
> >  			sdhc2_opp_table: opp-table {
> >  				compatible = "operating-points-v2";
> >
> > --
> > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
> > member of Code Aurora Forum, hosted by The Linux Foundation
> >