* [PATCH v2 0/2] regulator: dt-bindings: qcom,rpmh: minor cleanups and extend supplies
@ 2022-04-12 7:31 Krzysztof Kozlowski
2022-04-12 7:31 ` [PATCH v2 1/2] regulator: dt-bindings: qcom,rpmh: document supplies per variant Krzysztof Kozlowski
2022-04-12 7:31 ` [PATCH v2 2/2] regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A Krzysztof Kozlowski
0 siblings, 2 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-12 7:31 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown,
Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-kernel,
devicetree
Cc: Krzysztof Kozlowski
Hi,
Extend the RPMH regulator bindings with minor fixes and adding narrow supply
matching.
Changes since v1
================
1. Use "defs" method instead of referencing additional YAML file, because the
latter was not working properly.
Best regards,
Krzysztof
Krzysztof Kozlowski (2):
regulator: dt-bindings: qcom,rpmh: document supplies per variant
regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on
PMR735A
.../regulator/qcom,rpmh-regulator.yaml | 291 +++++++++++++++++-
1 file changed, 277 insertions(+), 14 deletions(-)
--
2.32.0
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v2 1/2] regulator: dt-bindings: qcom,rpmh: document supplies per variant 2022-04-12 7:31 [PATCH v2 0/2] regulator: dt-bindings: qcom,rpmh: minor cleanups and extend supplies Krzysztof Kozlowski @ 2022-04-12 7:31 ` Krzysztof Kozlowski 2022-04-14 15:51 ` Rob Herring 2022-04-12 7:31 ` [PATCH v2 2/2] regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A Krzysztof Kozlowski 1 sibling, 1 reply; 6+ messages in thread From: Krzysztof Kozlowski @ 2022-04-12 7:31 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-kernel, devicetree Cc: Krzysztof Kozlowski The RPMH regulator binding covers several devices with different regulator supplies, so it uses patterns matching broad range of these supplies. This works fine but is not specific and might miss actual mistakes when a wrong supply property is used for given variant. Describe the supplies depending on the compatible, using a defs-allOf method. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../regulator/qcom,rpmh-regulator.yaml | 290 +++++++++++++++++- 1 file changed, 276 insertions(+), 14 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 842ccef691b8..773536fe37c7 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -95,35 +95,297 @@ properties: vdd-rgb-supply: description: Input supply phandle of rgb. - vin-lvs-1-2-supply: - description: Input supply phandle of one or more regulators. - - vdd-bob-supply: - description: BOB regulator parent supply phandle. - bob: type: object $ref: "regulator.yaml#" description: BOB regulator node. patternProperties: - "^vdd-s([0-9]+)-supply$": - description: Input supply phandle(s) of one or more regulators. - - "^vdd-(l[0-9]+[-]){1,5}supply$": - description: Input supply phandle(s) of one or more regulators. - "^(smps|ldo|lvs)[0-9]+$": type: object $ref: "regulator.yaml#" description: smps/ldo regulator nodes(s). -additionalProperties: false - required: - compatible - qcom,pmic-id +allOf: + - $ref: "#/$defs/pm6150" + - $ref: "#/$defs/pm6150l" + - $ref: "#/$defs/pm7325" + - $ref: "#/$defs/pm8005" + - $ref: "#/$defs/pm8009" + - $ref: "#/$defs/pm8150" + - $ref: "#/$defs/pm8150l" + - $ref: "#/$defs/pm8350" + - $ref: "#/$defs/pm8350c" + - $ref: "#/$defs/pm8450" + - $ref: "#/$defs/pm8998" + - $ref: "#/$defs/pmg1110" + - $ref: "#/$defs/pmi8998" + - $ref: "#/$defs/pmr735a" + - $ref: "#/$defs/pmx55" + - $ref: "#/$defs/pmx65" + +unevaluatedProperties: false + +$defs: + pm6150: + if: + properties: + compatible: + enum: + - qcom,pm6150-rpmh-regulators + then: + properties: + vdd-l2-l3-supply: true + vdd-l4-l7-l8-supply: true + vdd-l5-l16-l17-l18-l19-supply: true + vdd-l10-l14-l15-supply: true + vdd-l11-l12-l13-supply: true + patternProperties: + "^vdd-l[169]-supply$": true + "^vdd-s[1-5]-supply$": true + + pm6150l: + if: + properties: + compatible: + enum: + - qcom,pm6150l-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l1-l8-supply: true + vdd-l2-l3-supply: true + vdd-l4-l5-l6-supply: true + vdd-l7-l11-supply: true + vdd-l9-l10-supply: true + patternProperties: + "^vdd-s[1-8]-supply$": true + + pm7325: + if: + properties: + compatible: + enum: + - qcom,pm7325-rpmh-regulators + then: + properties: + vdd-l1-l4-l12-l15-supply: true + vdd-l2-l7-supply: true + vdd-l6-l9-l10-supply: true + vdd-l11-l17-l18-l19-supply: true + vdd-l13-supply: true + vdd-l14-l16-supply: true + patternProperties: + "^vdd-l[358]-supply$": true + "^vdd-s[1-8]-supply$": true + + pm8005: + if: + properties: + compatible: + enum: + - qcom,pm8005-rpmh-regulators + then: + patternProperties: + "^vdd-s[1-4]-supply$": true + + pm8009: + if: + properties: + compatible: + enum: + - qcom,pm8009-rpmh-regulators + - qcom,pm8009-1-rpmh-regulators + then: + properties: + vdd-l5-l6-supply: true + patternProperties: + "^vdd-l[1-47]-supply$": true + "^vdd-s[1-2]-supply$": true + + pm8150: + if: + properties: + compatible: + enum: + - qcom,pm8150-rpmh-regulators + - qcom,pmm8155au-rpmh-regulators + then: + properties: + vdd-l1-l8-l11-supply: true + vdd-l2-l10-supply: true + vdd-l3-l4-l5-l18-supply: true + vdd-l6-l9-supply: true + vdd-l7-l12-l14-l15-supply: true + vdd-l13-l16-l17-supply: true + patternProperties: + "^vdd-s([1-9]|10)-supply$": true + + pm8150l: + if: + properties: + compatible: + enum: + - qcom,pm8150l-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l1-l8-supply: true + vdd-l2-l3-supply: true + vdd-l4-l5-l6-supply: true + vdd-l7-l11-supply: true + vdd-l9-l10-supply: true + patternProperties: + "^vdd-s[1-8]-supply$": true + + pm8350: + if: + properties: + compatible: + enum: + - qcom,pm8350-rpmh-regulators + then: + properties: + vdd-l1-l4-supply: true + vdd-l2-l7-supply: true + vdd-l3-l5-supply: true + vdd-l6-l9-l10-supply: true + vdd-l8-supply: true + patternProperties: + "^vdd-s([1-9]|1[0-2])-supply$": true + + pm8350c: + if: + properties: + compatible: + enum: + - qcom,pm8350c-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + vdd-l1-l12-supply: true + vdd-l2-l8-supply: true + vdd-l3-l4-l5-l7-l13-supply: true + vdd-l6-l9-l11-supply: true + vdd-l10-supply: true + patternProperties: + "^vdd-s([1-9]|10)-supply$": true + + pm8450: + if: + properties: + compatible: + enum: + - qcom,pm8450-rpmh-regulators + then: + patternProperties: + "^vdd-l[1-4]-supply$": true + "^vdd-s[1-6]-supply$": true + + pm8998: + if: + properties: + compatible: + enum: + - qcom,pm8998-rpmh-regulators + then: + properties: + vdd-l1-l27-supply: true + vdd-l2-l8-l17-supply: true + vdd-l3-l11-supply: true + vdd-l4-l5-supply: true + vdd-l6-supply: true + vdd-l7-l12-l14-l15-supply: true + vdd-l9-supply: true + vdd-l10-l23-l25-supply: true + vdd-l13-l19-l21-supply: true + vdd-l16-l28-supply: true + vdd-l18-l22-supply: true + vdd-l20-l24-supply: true + vdd-l26-supply: true + vin-lvs-1-2-supply: true + patternProperties: + "^vdd-s([1-9]|1[0-3])-supply$": true + + pmg1110: + if: + properties: + compatible: + enum: + - qcom,pmg1110-rpmh-regulators + then: + properties: + vdd-s1-supply: true + + pmi8998: + if: + properties: + compatible: + enum: + - qcom,pmi8998-rpmh-regulators + then: + properties: + vdd-bob-supply: + description: BOB regulator parent supply phandle. + + pmr735a: + if: + properties: + compatible: + enum: + - qcom,pmr735a-rpmh-regulators + then: + properties: + vdd-l1-l2-supply: true + vdd-l3-supply: true + vdd-l4-supply: true + vdd-l5-l6-supply: true + patternProperties: + "^vdd-s[1-3]-supply$": true + + pmx55: + if: + properties: + compatible: + enum: + - qcom,pmx55-rpmh-regulators + then: + properties: + vdd-l1-l2-supply: true + vdd-l3-l9-supply: true + vdd-l4-l12-supply: true + vdd-l5-l6-supply: true + vdd-l7-l8-supply: true + vdd-l10-l11-l13-supply: true + patternProperties: + "^vdd-l1[4-6]-supply$": true + "^vdd-s[1-7]-supply$": true + + pmx65: + if: + properties: + compatible: + enum: + - qcom,pmx65-rpmh-regulators + then: + properties: + vdd-l2-l18-supply: true + vdd-l5-l6-l16-supply: true + vdd-l8-l9-supply: true + vdd-l11-l13-supply: true + patternProperties: + "^vdd-l[1347]-supply$": true + "^vdd-l1[0245789]-supply$": true + "^vdd-l2[01]-supply$": true + "^vdd-s[1-8]-supply$": true + examples: - | #include <dt-bindings/regulator/qcom,rpmh-regulator.h> -- 2.32.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] regulator: dt-bindings: qcom,rpmh: document supplies per variant 2022-04-12 7:31 ` [PATCH v2 1/2] regulator: dt-bindings: qcom,rpmh: document supplies per variant Krzysztof Kozlowski @ 2022-04-14 15:51 ` Rob Herring 2022-04-19 6:44 ` Krzysztof Kozlowski 0 siblings, 1 reply; 6+ messages in thread From: Rob Herring @ 2022-04-14 15:51 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown, Krzysztof Kozlowski, linux-arm-msm, linux-kernel, devicetree On Tue, Apr 12, 2022 at 09:31:22AM +0200, Krzysztof Kozlowski wrote: > The RPMH regulator binding covers several devices with different > regulator supplies, so it uses patterns matching broad range of these > supplies. This works fine but is not specific and might miss actual > mistakes when a wrong supply property is used for given variant. > > Describe the supplies depending on the compatible, using a defs-allOf > method. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../regulator/qcom,rpmh-regulator.yaml | 290 +++++++++++++++++- > 1 file changed, 276 insertions(+), 14 deletions(-) > > diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > index 842ccef691b8..773536fe37c7 100644 > --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > @@ -95,35 +95,297 @@ properties: > vdd-rgb-supply: > description: Input supply phandle of rgb. > > - vin-lvs-1-2-supply: > - description: Input supply phandle of one or more regulators. > - > - vdd-bob-supply: > - description: BOB regulator parent supply phandle. > - > bob: > type: object > $ref: "regulator.yaml#" > description: BOB regulator node. > > patternProperties: > - "^vdd-s([0-9]+)-supply$": > - description: Input supply phandle(s) of one or more regulators. > - > - "^vdd-(l[0-9]+[-]){1,5}supply$": > - description: Input supply phandle(s) of one or more regulators. > - > "^(smps|ldo|lvs)[0-9]+$": > type: object > $ref: "regulator.yaml#" > description: smps/ldo regulator nodes(s). > > -additionalProperties: false > - > required: > - compatible > - qcom,pmic-id > > +allOf: > + - $ref: "#/$defs/pm6150" > + - $ref: "#/$defs/pm6150l" > + - $ref: "#/$defs/pm7325" > + - $ref: "#/$defs/pm8005" > + - $ref: "#/$defs/pm8009" > + - $ref: "#/$defs/pm8150" > + - $ref: "#/$defs/pm8150l" > + - $ref: "#/$defs/pm8350" > + - $ref: "#/$defs/pm8350c" > + - $ref: "#/$defs/pm8450" > + - $ref: "#/$defs/pm8998" > + - $ref: "#/$defs/pmg1110" > + - $ref: "#/$defs/pmi8998" > + - $ref: "#/$defs/pmr735a" > + - $ref: "#/$defs/pmx55" > + - $ref: "#/$defs/pmx65" > + > +unevaluatedProperties: false > + > +$defs: I'm not following on why you need $defs here rather than putting the if/then schemas under the 'allOf'. $defs should primarily only be used where it saves duplicating a schema 2 or more times. That could be the case here if there's a case that's a subset of another case. > + pm6150: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm6150-rpmh-regulators > + then: > + properties: > + vdd-l2-l3-supply: true > + vdd-l4-l7-l8-supply: true > + vdd-l5-l16-l17-l18-l19-supply: true > + vdd-l10-l14-l15-supply: true > + vdd-l11-l12-l13-supply: true > + patternProperties: > + "^vdd-l[169]-supply$": true > + "^vdd-s[1-5]-supply$": true > + > + pm6150l: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm6150l-rpmh-regulators > + then: > + properties: > + vdd-bob-supply: > + description: BOB regulator parent supply phandle. > + vdd-l1-l8-supply: true > + vdd-l2-l3-supply: true > + vdd-l4-l5-l6-supply: true > + vdd-l7-l11-supply: true > + vdd-l9-l10-supply: true > + patternProperties: > + "^vdd-s[1-8]-supply$": true > + > + pm7325: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm7325-rpmh-regulators > + then: > + properties: > + vdd-l1-l4-l12-l15-supply: true > + vdd-l2-l7-supply: true > + vdd-l6-l9-l10-supply: true > + vdd-l11-l17-l18-l19-supply: true > + vdd-l13-supply: true > + vdd-l14-l16-supply: true > + patternProperties: > + "^vdd-l[358]-supply$": true > + "^vdd-s[1-8]-supply$": true > + > + pm8005: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm8005-rpmh-regulators > + then: > + patternProperties: > + "^vdd-s[1-4]-supply$": true > + > + pm8009: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm8009-rpmh-regulators > + - qcom,pm8009-1-rpmh-regulators > + then: > + properties: > + vdd-l5-l6-supply: true > + patternProperties: > + "^vdd-l[1-47]-supply$": true > + "^vdd-s[1-2]-supply$": true > + > + pm8150: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm8150-rpmh-regulators > + - qcom,pmm8155au-rpmh-regulators > + then: > + properties: > + vdd-l1-l8-l11-supply: true > + vdd-l2-l10-supply: true > + vdd-l3-l4-l5-l18-supply: true > + vdd-l6-l9-supply: true > + vdd-l7-l12-l14-l15-supply: true > + vdd-l13-l16-l17-supply: true > + patternProperties: > + "^vdd-s([1-9]|10)-supply$": true > + > + pm8150l: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm8150l-rpmh-regulators > + then: > + properties: > + vdd-bob-supply: > + description: BOB regulator parent supply phandle. > + vdd-l1-l8-supply: true > + vdd-l2-l3-supply: true > + vdd-l4-l5-l6-supply: true > + vdd-l7-l11-supply: true > + vdd-l9-l10-supply: true > + patternProperties: > + "^vdd-s[1-8]-supply$": true > + > + pm8350: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm8350-rpmh-regulators > + then: > + properties: > + vdd-l1-l4-supply: true > + vdd-l2-l7-supply: true > + vdd-l3-l5-supply: true > + vdd-l6-l9-l10-supply: true > + vdd-l8-supply: true > + patternProperties: > + "^vdd-s([1-9]|1[0-2])-supply$": true > + > + pm8350c: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm8350c-rpmh-regulators > + then: > + properties: > + vdd-bob-supply: > + description: BOB regulator parent supply phandle. > + vdd-l1-l12-supply: true > + vdd-l2-l8-supply: true > + vdd-l3-l4-l5-l7-l13-supply: true > + vdd-l6-l9-l11-supply: true > + vdd-l10-supply: true > + patternProperties: > + "^vdd-s([1-9]|10)-supply$": true > + > + pm8450: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm8450-rpmh-regulators > + then: > + patternProperties: > + "^vdd-l[1-4]-supply$": true > + "^vdd-s[1-6]-supply$": true > + > + pm8998: > + if: > + properties: > + compatible: > + enum: > + - qcom,pm8998-rpmh-regulators > + then: > + properties: > + vdd-l1-l27-supply: true > + vdd-l2-l8-l17-supply: true > + vdd-l3-l11-supply: true > + vdd-l4-l5-supply: true > + vdd-l6-supply: true > + vdd-l7-l12-l14-l15-supply: true > + vdd-l9-supply: true > + vdd-l10-l23-l25-supply: true > + vdd-l13-l19-l21-supply: true > + vdd-l16-l28-supply: true > + vdd-l18-l22-supply: true > + vdd-l20-l24-supply: true > + vdd-l26-supply: true > + vin-lvs-1-2-supply: true > + patternProperties: > + "^vdd-s([1-9]|1[0-3])-supply$": true > + > + pmg1110: > + if: > + properties: > + compatible: > + enum: > + - qcom,pmg1110-rpmh-regulators > + then: > + properties: > + vdd-s1-supply: true > + > + pmi8998: > + if: > + properties: > + compatible: > + enum: > + - qcom,pmi8998-rpmh-regulators > + then: > + properties: > + vdd-bob-supply: > + description: BOB regulator parent supply phandle. > + > + pmr735a: > + if: > + properties: > + compatible: > + enum: > + - qcom,pmr735a-rpmh-regulators > + then: > + properties: > + vdd-l1-l2-supply: true > + vdd-l3-supply: true > + vdd-l4-supply: true > + vdd-l5-l6-supply: true > + patternProperties: > + "^vdd-s[1-3]-supply$": true > + > + pmx55: > + if: > + properties: > + compatible: > + enum: > + - qcom,pmx55-rpmh-regulators > + then: > + properties: > + vdd-l1-l2-supply: true > + vdd-l3-l9-supply: true > + vdd-l4-l12-supply: true > + vdd-l5-l6-supply: true > + vdd-l7-l8-supply: true > + vdd-l10-l11-l13-supply: true > + patternProperties: > + "^vdd-l1[4-6]-supply$": true > + "^vdd-s[1-7]-supply$": true > + > + pmx65: > + if: > + properties: > + compatible: > + enum: > + - qcom,pmx65-rpmh-regulators > + then: > + properties: > + vdd-l2-l18-supply: true > + vdd-l5-l6-l16-supply: true > + vdd-l8-l9-supply: true > + vdd-l11-l13-supply: true > + patternProperties: > + "^vdd-l[1347]-supply$": true > + "^vdd-l1[0245789]-supply$": true > + "^vdd-l2[01]-supply$": true > + "^vdd-s[1-8]-supply$": true > + > examples: > - | > #include <dt-bindings/regulator/qcom,rpmh-regulator.h> > -- > 2.32.0 > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] regulator: dt-bindings: qcom,rpmh: document supplies per variant 2022-04-14 15:51 ` Rob Herring @ 2022-04-19 6:44 ` Krzysztof Kozlowski 2022-04-19 17:31 ` Rob Herring 0 siblings, 1 reply; 6+ messages in thread From: Krzysztof Kozlowski @ 2022-04-19 6:44 UTC (permalink / raw) To: Rob Herring Cc: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown, Krzysztof Kozlowski, linux-arm-msm, linux-kernel, devicetree On 14/04/2022 17:51, Rob Herring wrote: > On Tue, Apr 12, 2022 at 09:31:22AM +0200, Krzysztof Kozlowski wrote: >> The RPMH regulator binding covers several devices with different >> regulator supplies, so it uses patterns matching broad range of these >> supplies. This works fine but is not specific and might miss actual >> mistakes when a wrong supply property is used for given variant. >> >> Describe the supplies depending on the compatible, using a defs-allOf >> method. >> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> --- >> .../regulator/qcom,rpmh-regulator.yaml | 290 +++++++++++++++++- >> 1 file changed, 276 insertions(+), 14 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml >> index 842ccef691b8..773536fe37c7 100644 >> --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml >> +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml >> @@ -95,35 +95,297 @@ properties: >> vdd-rgb-supply: >> description: Input supply phandle of rgb. >> >> - vin-lvs-1-2-supply: >> - description: Input supply phandle of one or more regulators. >> - >> - vdd-bob-supply: >> - description: BOB regulator parent supply phandle. >> - >> bob: >> type: object >> $ref: "regulator.yaml#" >> description: BOB regulator node. >> >> patternProperties: >> - "^vdd-s([0-9]+)-supply$": >> - description: Input supply phandle(s) of one or more regulators. >> - >> - "^vdd-(l[0-9]+[-]){1,5}supply$": >> - description: Input supply phandle(s) of one or more regulators. >> - >> "^(smps|ldo|lvs)[0-9]+$": >> type: object >> $ref: "regulator.yaml#" >> description: smps/ldo regulator nodes(s). >> >> -additionalProperties: false >> - >> required: >> - compatible >> - qcom,pmic-id >> >> +allOf: >> + - $ref: "#/$defs/pm6150" >> + - $ref: "#/$defs/pm6150l" >> + - $ref: "#/$defs/pm7325" >> + - $ref: "#/$defs/pm8005" >> + - $ref: "#/$defs/pm8009" >> + - $ref: "#/$defs/pm8150" >> + - $ref: "#/$defs/pm8150l" >> + - $ref: "#/$defs/pm8350" >> + - $ref: "#/$defs/pm8350c" >> + - $ref: "#/$defs/pm8450" >> + - $ref: "#/$defs/pm8998" >> + - $ref: "#/$defs/pmg1110" >> + - $ref: "#/$defs/pmi8998" >> + - $ref: "#/$defs/pmr735a" >> + - $ref: "#/$defs/pmx55" >> + - $ref: "#/$defs/pmx65" >> + >> +unevaluatedProperties: false >> + >> +$defs: > > I'm not following on why you need $defs here rather than putting the > if/then schemas under the 'allOf'. $defs should primarily only be used > where it saves duplicating a schema 2 or more times. That could be the > case here if there's a case that's a subset of another case. The allOf+defs is a workaround for schema behavior. The entire approach if defining properties in "if:then:" works only with unevaluatedProperties, not with additionalProperties. However unevaluatedProperties require to reference other schema, which I do not do here. I don't have other schema. allOf+def has references tricking schema to accept unevaluatedProperties. Best regards, Krzysztof ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] regulator: dt-bindings: qcom,rpmh: document supplies per variant 2022-04-19 6:44 ` Krzysztof Kozlowski @ 2022-04-19 17:31 ` Rob Herring 0 siblings, 0 replies; 6+ messages in thread From: Rob Herring @ 2022-04-19 17:31 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown, Krzysztof Kozlowski, linux-arm-msm, linux-kernel, devicetree On Tue, Apr 19, 2022 at 08:44:48AM +0200, Krzysztof Kozlowski wrote: > On 14/04/2022 17:51, Rob Herring wrote: > > On Tue, Apr 12, 2022 at 09:31:22AM +0200, Krzysztof Kozlowski wrote: > >> The RPMH regulator binding covers several devices with different > >> regulator supplies, so it uses patterns matching broad range of these > >> supplies. This works fine but is not specific and might miss actual > >> mistakes when a wrong supply property is used for given variant. > >> > >> Describe the supplies depending on the compatible, using a defs-allOf > >> method. > >> > >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > >> --- > >> .../regulator/qcom,rpmh-regulator.yaml | 290 +++++++++++++++++- > >> 1 file changed, 276 insertions(+), 14 deletions(-) > >> > >> diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > >> index 842ccef691b8..773536fe37c7 100644 > >> --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > >> +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml > >> @@ -95,35 +95,297 @@ properties: > >> vdd-rgb-supply: > >> description: Input supply phandle of rgb. > >> > >> - vin-lvs-1-2-supply: > >> - description: Input supply phandle of one or more regulators. > >> - > >> - vdd-bob-supply: > >> - description: BOB regulator parent supply phandle. > >> - > >> bob: > >> type: object > >> $ref: "regulator.yaml#" > >> description: BOB regulator node. > >> > >> patternProperties: > >> - "^vdd-s([0-9]+)-supply$": > >> - description: Input supply phandle(s) of one or more regulators. > >> - > >> - "^vdd-(l[0-9]+[-]){1,5}supply$": > >> - description: Input supply phandle(s) of one or more regulators. > >> - > >> "^(smps|ldo|lvs)[0-9]+$": > >> type: object > >> $ref: "regulator.yaml#" > >> description: smps/ldo regulator nodes(s). > >> > >> -additionalProperties: false > >> - > >> required: > >> - compatible > >> - qcom,pmic-id > >> > >> +allOf: > >> + - $ref: "#/$defs/pm6150" > >> + - $ref: "#/$defs/pm6150l" > >> + - $ref: "#/$defs/pm7325" > >> + - $ref: "#/$defs/pm8005" > >> + - $ref: "#/$defs/pm8009" > >> + - $ref: "#/$defs/pm8150" > >> + - $ref: "#/$defs/pm8150l" > >> + - $ref: "#/$defs/pm8350" > >> + - $ref: "#/$defs/pm8350c" > >> + - $ref: "#/$defs/pm8450" > >> + - $ref: "#/$defs/pm8998" > >> + - $ref: "#/$defs/pmg1110" > >> + - $ref: "#/$defs/pmi8998" > >> + - $ref: "#/$defs/pmr735a" > >> + - $ref: "#/$defs/pmx55" > >> + - $ref: "#/$defs/pmx65" > >> + > >> +unevaluatedProperties: false > >> + > >> +$defs: > > > > I'm not following on why you need $defs here rather than putting the > > if/then schemas under the 'allOf'. $defs should primarily only be used > > where it saves duplicating a schema 2 or more times. That could be the > > case here if there's a case that's a subset of another case. > > The allOf+defs is a workaround for schema behavior. The entire approach > if defining properties in "if:then:" works only with > unevaluatedProperties, not with additionalProperties. However > unevaluatedProperties require to reference other schema, which I do not > do here. I don't have other schema. > > allOf+def has references tricking schema to accept unevaluatedProperties. I'm going to relax the meta-schema instead. Rob ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 2/2] regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A 2022-04-12 7:31 [PATCH v2 0/2] regulator: dt-bindings: qcom,rpmh: minor cleanups and extend supplies Krzysztof Kozlowski 2022-04-12 7:31 ` [PATCH v2 1/2] regulator: dt-bindings: qcom,rpmh: document supplies per variant Krzysztof Kozlowski @ 2022-04-12 7:31 ` Krzysztof Kozlowski 1 sibling, 0 replies; 6+ messages in thread From: Krzysztof Kozlowski @ 2022-04-12 7:31 UTC (permalink / raw) To: Andy Gross, Bjorn Andersson, Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski, linux-arm-msm, linux-kernel, devicetree Cc: Krzysztof Kozlowski The PMR735A comes with vdd-l7-bob-supply supply which was previously not documented. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 773536fe37c7..96d51449524a 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -347,6 +347,7 @@ $defs: vdd-l3-supply: true vdd-l4-supply: true vdd-l5-l6-supply: true + vdd-l7-bob-supply: true patternProperties: "^vdd-s[1-3]-supply$": true -- 2.32.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-04-19 17:31 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-04-12 7:31 [PATCH v2 0/2] regulator: dt-bindings: qcom,rpmh: minor cleanups and extend supplies Krzysztof Kozlowski 2022-04-12 7:31 ` [PATCH v2 1/2] regulator: dt-bindings: qcom,rpmh: document supplies per variant Krzysztof Kozlowski 2022-04-14 15:51 ` Rob Herring 2022-04-19 6:44 ` Krzysztof Kozlowski 2022-04-19 17:31 ` Rob Herring 2022-04-12 7:31 ` [PATCH v2 2/2] regulator: dt-bindings: qcom,rpmh: document vdd-l7-bob-supply on PMR735A Krzysztof Kozlowski
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.