From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: "Marek Behún" <kabel@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>,
Felix Fietkau <nbd@nbd.name>, Jakub Kicinski <kuba@kernel.org>,
John Crispin <john@phrozen.org>,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Mark Lee <Mark-MC.Lee@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Sean Wang <sean.wang@mediatek.com>
Subject: Re: [PATCH RFC 00/12] mtk_eth_soc phylink updates
Date: Mon, 11 Apr 2022 14:30:19 +0100 [thread overview]
Message-ID: <YlQta3Qu1aM4De9n@shell.armlinux.org.uk> (raw)
In-Reply-To: <Yk2k9D40QojsRhoo@shell.armlinux.org.uk>
A gentle reminder to those who either worked on or who look after
this driver to test this series and report back please.
Thanks.
On Wed, Apr 06, 2022 at 03:34:28PM +0100, Russell King (Oracle) wrote:
> Hi,
>
> This series ultimately updates mtk_eth_soc to use phylink_pcs, with some
> fixes along the way.
>
> Previous attempts to update this driver (which is now marked as legacy)
> have failed due to lack of testing. I am hoping that this time will be
> different; Marek can test RGMII modes, but not SGMII. So all that we
> know is that this patch series probably doesn't break RGMII.
>
> 1) remove unused mac_mode and sgmii flags members from structures.
> 2) remove unnecessary interpretation of speed when configuring 1000
> and 2500 Base-X
> 3) move configuration of SGMII duplex setting from mac_config() to
> link_up()
> 4) only pass in interface mode to mtk_sgmii_setup_mode_force()
> 5) move decision about which mtk_sgmii_setup_mode_*() function to call
> into mtk_sgmii.c
> 6) add a fixme comment for RGMII explaning why the call to
> mtk_gmac0_rgmii_adjust() is completely wrong - this needs to be
> addressed by someone who has the hardware and can test an appropriate
> fix. This fixme means that the driver still can't become non-legacy.
> 7) move gmac setup from mac_config() to mac_finish() - this preserves
> the order that we write to the hardware when we eventually convert to
> phylink_pcs()
> 8) move configuration of syscfg0 in SGMII/802.3z mode to mac_finish()
> for the same reasons as (7).
> 9) convert mtk_sgmii.c code structure and the mtk_sgmii structure to
> suit conversion to phylink_pcs
> 10) finally convert to phylink_pcs
>
> It would be nice to get these changes fully tested, but past experience
> has shown that for this driver, that's unfortunately very unlikely. So,
> I propose that the merging plan for this is that if there are no
> comments after three weeks to a month, I'll send this for inclusion in
> net-next.
>
> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 103 +++++++++-------
> drivers/net/ethernet/mediatek/mtk_eth_soc.h | 40 +++----
> drivers/net/ethernet/mediatek/mtk_sgmii.c | 174 ++++++++++++++++------------
> 3 files changed, 185 insertions(+), 132 deletions(-)
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: "Marek Behún" <kabel@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>,
Felix Fietkau <nbd@nbd.name>, Jakub Kicinski <kuba@kernel.org>,
John Crispin <john@phrozen.org>,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Mark Lee <Mark-MC.Lee@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Sean Wang <sean.wang@mediatek.com>
Subject: Re: [PATCH RFC 00/12] mtk_eth_soc phylink updates
Date: Mon, 11 Apr 2022 14:30:19 +0100 [thread overview]
Message-ID: <YlQta3Qu1aM4De9n@shell.armlinux.org.uk> (raw)
In-Reply-To: <Yk2k9D40QojsRhoo@shell.armlinux.org.uk>
A gentle reminder to those who either worked on or who look after
this driver to test this series and report back please.
Thanks.
On Wed, Apr 06, 2022 at 03:34:28PM +0100, Russell King (Oracle) wrote:
> Hi,
>
> This series ultimately updates mtk_eth_soc to use phylink_pcs, with some
> fixes along the way.
>
> Previous attempts to update this driver (which is now marked as legacy)
> have failed due to lack of testing. I am hoping that this time will be
> different; Marek can test RGMII modes, but not SGMII. So all that we
> know is that this patch series probably doesn't break RGMII.
>
> 1) remove unused mac_mode and sgmii flags members from structures.
> 2) remove unnecessary interpretation of speed when configuring 1000
> and 2500 Base-X
> 3) move configuration of SGMII duplex setting from mac_config() to
> link_up()
> 4) only pass in interface mode to mtk_sgmii_setup_mode_force()
> 5) move decision about which mtk_sgmii_setup_mode_*() function to call
> into mtk_sgmii.c
> 6) add a fixme comment for RGMII explaning why the call to
> mtk_gmac0_rgmii_adjust() is completely wrong - this needs to be
> addressed by someone who has the hardware and can test an appropriate
> fix. This fixme means that the driver still can't become non-legacy.
> 7) move gmac setup from mac_config() to mac_finish() - this preserves
> the order that we write to the hardware when we eventually convert to
> phylink_pcs()
> 8) move configuration of syscfg0 in SGMII/802.3z mode to mac_finish()
> for the same reasons as (7).
> 9) convert mtk_sgmii.c code structure and the mtk_sgmii structure to
> suit conversion to phylink_pcs
> 10) finally convert to phylink_pcs
>
> It would be nice to get these changes fully tested, but past experience
> has shown that for this driver, that's unfortunately very unlikely. So,
> I propose that the merging plan for this is that if there are no
> comments after three weeks to a month, I'll send this for inclusion in
> net-next.
>
> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 103 +++++++++-------
> drivers/net/ethernet/mediatek/mtk_eth_soc.h | 40 +++----
> drivers/net/ethernet/mediatek/mtk_sgmii.c | 174 ++++++++++++++++------------
> 3 files changed, 185 insertions(+), 132 deletions(-)
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: "Marek Behún" <kabel@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>,
Felix Fietkau <nbd@nbd.name>, Jakub Kicinski <kuba@kernel.org>,
John Crispin <john@phrozen.org>,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
Mark Lee <Mark-MC.Lee@mediatek.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Sean Wang <sean.wang@mediatek.com>
Subject: Re: [PATCH RFC 00/12] mtk_eth_soc phylink updates
Date: Mon, 11 Apr 2022 14:30:19 +0100 [thread overview]
Message-ID: <YlQta3Qu1aM4De9n@shell.armlinux.org.uk> (raw)
In-Reply-To: <Yk2k9D40QojsRhoo@shell.armlinux.org.uk>
A gentle reminder to those who either worked on or who look after
this driver to test this series and report back please.
Thanks.
On Wed, Apr 06, 2022 at 03:34:28PM +0100, Russell King (Oracle) wrote:
> Hi,
>
> This series ultimately updates mtk_eth_soc to use phylink_pcs, with some
> fixes along the way.
>
> Previous attempts to update this driver (which is now marked as legacy)
> have failed due to lack of testing. I am hoping that this time will be
> different; Marek can test RGMII modes, but not SGMII. So all that we
> know is that this patch series probably doesn't break RGMII.
>
> 1) remove unused mac_mode and sgmii flags members from structures.
> 2) remove unnecessary interpretation of speed when configuring 1000
> and 2500 Base-X
> 3) move configuration of SGMII duplex setting from mac_config() to
> link_up()
> 4) only pass in interface mode to mtk_sgmii_setup_mode_force()
> 5) move decision about which mtk_sgmii_setup_mode_*() function to call
> into mtk_sgmii.c
> 6) add a fixme comment for RGMII explaning why the call to
> mtk_gmac0_rgmii_adjust() is completely wrong - this needs to be
> addressed by someone who has the hardware and can test an appropriate
> fix. This fixme means that the driver still can't become non-legacy.
> 7) move gmac setup from mac_config() to mac_finish() - this preserves
> the order that we write to the hardware when we eventually convert to
> phylink_pcs()
> 8) move configuration of syscfg0 in SGMII/802.3z mode to mac_finish()
> for the same reasons as (7).
> 9) convert mtk_sgmii.c code structure and the mtk_sgmii structure to
> suit conversion to phylink_pcs
> 10) finally convert to phylink_pcs
>
> It would be nice to get these changes fully tested, but past experience
> has shown that for this driver, that's unfortunately very unlikely. So,
> I propose that the merging plan for this is that if there are no
> comments after three weeks to a month, I'll send this for inclusion in
> net-next.
>
> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 103 +++++++++-------
> drivers/net/ethernet/mediatek/mtk_eth_soc.h | 40 +++----
> drivers/net/ethernet/mediatek/mtk_sgmii.c | 174 ++++++++++++++++------------
> 3 files changed, 185 insertions(+), 132 deletions(-)
>
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
next prev parent reply other threads:[~2022-04-11 13:30 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 14:34 [PATCH RFC 00/12] mtk_eth_soc phylink updates Russell King (Oracle)
2022-04-06 14:34 ` Russell King (Oracle)
2022-04-06 14:34 ` Russell King (Oracle)
2022-04-06 14:34 ` [PATCH RFC net-next 01/12] net: mtk_eth_soc: remove unused mac->mode Russell King (Oracle)
2022-04-06 14:34 ` Russell King (Oracle)
2022-04-06 14:34 ` Russell King (Oracle)
2022-04-06 14:35 ` [PATCH RFC net-next 02/12] net: mtk_eth_soc: remove unused sgmii flags Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` [PATCH RFC net-next 03/12] net: mtk_eth_soc: add mask and update PCS speed definitions Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` [PATCH RFC net-next 04/12] net: mtk_eth_soc: correct 802.3z speed setting Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` [PATCH RFC net-next 05/12] net: mtk_eth_soc: correct 802.3z duplex setting Russell King
2022-04-06 14:35 ` Russell King
2022-04-06 14:35 ` Russell King
2022-04-06 14:35 ` [PATCH RFC net-next 06/12] net: mtk_eth_soc: stop passing phylink state to sgmii setup Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` [PATCH RFC net-next 07/12] net: mtk_eth_soc: provide mtk_sgmii_config() Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` [PATCH RFC net-next 08/12] net: mtk_eth_soc: add fixme comment for state->speed use Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` [PATCH RFC net-next 09/12] net: mtk_eth_soc: move MAC_MCR setting to mac_finish() Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` [PATCH RFC net-next 10/12] net: mtk_eth_soc: move restoration of SYSCFG0 " Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` [PATCH RFC net-next 11/12] net: mtk_eth_soc: convert code structure to suit split PCS support Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` [PATCH RFC net-next 12/12] net: mtk_eth_soc: partially convert to phylink_pcs Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-06 14:35 ` Russell King (Oracle)
2022-04-11 13:30 ` Russell King (Oracle) [this message]
2022-04-11 13:30 ` [PATCH RFC 00/12] mtk_eth_soc phylink updates Russell King (Oracle)
2022-04-11 13:30 ` Russell King (Oracle)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YlQta3Qu1aM4De9n@shell.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=Mark-MC.Lee@mediatek.com \
--cc=davem@davemloft.net \
--cc=john@phrozen.org \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=nbd@nbd.name \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.