Re: [PATCH v2 2/8] dt-bindings: PCI: renesas-pci-usb: Convert bindings to json-schema

[Rob Herring <robh@kernel.org>]

On Wed, Apr 20, 2022 at 03:46:11PM +0200, Herve Codina wrote:
> Hi Rob,
> 
> On Wed, 20 Apr 2022 08:18:50 -0500
> Rob Herring <robh@kernel.org> wrote:
> 
> ...
> 
> > > > > +  bus-range:
> > > > > +    description: |
> > > > > +      The PCI bus number range; as this is a single bus, the range
> > > > > +      should be specified as the same value twice.    
> > > > 
> > > > items:
> > > >   const: 0  
> > > 
> > > Well, some other values are present in some dtsi files such as
> > > 'bus_range = <1 1>;' or 'bus_range = <2 2>;' in r8a7742.dtsi.
> > > 
> > > The constraint is to have the same value twice. Is there a way
> > > to specify this constraint ?  
> > 
> > Yes, but probably not worthwhile. Just drop it as pci-bus.yaml already 
> > defines it.
> 
> Instead of fully dropping the property, don't you think that keeping
> the given description here can be a way to express that the same value
> is needed twice ?

Yeah, that's fine.


> > > > > +  "#address-cells":
> > > > > +    const: 3
> > > > > +
> > > > > +  "#size-cells":
> > > > > +    const: 2
> > > > > +
> > > > > +  "#interrupt-cells":
> > > > > +    const: 1    
> > > > 
> > > > All these are defined by pci-bus.yaml  
> > > 
> > > Right.
> > > Replaced by:
> > > 
> > > "#address-cells": true
> > > "#size-cells": true
> > > "#interrupt-cells": true
> > > 
> > > Is that correct ?  
> > 
> > You can just drop them completely.
> 
> Ok for #address-cells and #size-cells but not for #interrupt-cells.
> 
> Dropping #interrupt-cells makes 'make dtbindings_check' unhappy:
> --- 8< ---
> $ make dt_binding_check DT_SCHEMA_FILES=renesas,pci-rcar-gen2.yaml
>   LINT    Documentation/devicetree/bindings
>   CHKDT   Documentation/devicetree/bindings/processed-schema.json
> /home/hcodina/xxx/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml: properties: '#interrupt-cells' is a dependency of 'interrupt-map'
> 	from schema $id: http://devicetree.org/meta-schemas/interrupts.yaml#
>   SCHEMA  Documentation/devicetree/bindings/processed-schema.json
> /home/hcodina/xxx/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml: ignoring, error in schema: properties
>   DTEX    Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.example.dts
>   DTC     Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.example.dtb
>   CHECK   Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.example.dtb
> $ 
> --- 8< ---
> 
> So I keep 
> "#interrupt-cells": true

You should also drop 'interrupt-map' and 'interrupt-map-mask'.

Rob