* [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
@ 2022-04-27 8:03 ` Gene Chen
0 siblings, 0 replies; 21+ messages in thread
From: Gene Chen @ 2022-04-27 8:03 UTC (permalink / raw)
To: lee.jones, robh+dt, krzysztof.kozlowski+dt, matthias.bgg, pavel
Cc: devicetree, linux-leds, linux-arm-kernel, linux-mediatek,
linux-kernel, gene_chen, cy_huang
From: Gene Chen <gene_chen@richtek.com>
Add bindings for the Mediatek MT6360
Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
.../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
1 file changed, 258 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
diff --git a/Documentation/devicetree/bindings/mfd/mt6360.yaml b/Documentation/devicetree/bindings/mfd/mt6360.yaml
new file mode 100644
index 000000000000..2c0c5df16b00
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6360.yaml
@@ -0,0 +1,258 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 PMIC from MediaTek Integrated IC
+
+maintainers:
+ - Gene Chen <gene_chen@richtek.com>
+
+description: |
+ MT6360 is a PMIC device with the following sub modules.
+ It is interfaced to host controller using I2C interface.
+
+ This document describes the binding for PMIC device and its sub module.
+
+properties:
+ compatible:
+ const: mediatek,mt6360
+
+ reg:
+ description: I2C device address.
+ maxItems: 1
+
+ wakeup-source: true
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ enum:
+ - IRQB
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+ description:
+ The first cell is the IRQ number.
+
+ regulators:
+ $ref: ../regulator/mt6360-regulator.yaml
+
+ charger:
+ $ref: ../power/supply/mt6360_charger.yaml
+
+ tcpc:
+ $ref: ../usb/mediatek,mt6360-tcpc.yaml
+
+ led-controller:
+ $ref: ../leds/leds-mt6360.yaml
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+ #include <dt-bindings/leds/common.h>
+ #include <dt-bindings/usb/pd.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mt6360@34 {
+ compatible = "mediatek,mt6360";
+ reg = <0x34>;
+ wakeup-source;
+ interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "IRQB";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ mt6360_charger: charger {
+ compatible = "mediatek,mt6360-chg";
+ richtek,vinovp-microvolt = <14500000>;
+
+ otg_vbus_regulator: usb-otg-vbus-regulator {
+ regulator-compatible = "usb-otg-vbus";
+ regulator-name = "usb-otg-vbus";
+ regulator-min-microvolt = <4425000>;
+ regulator-max-microvolt = <5825000>;
+ };
+ };
+
+ led-controller {
+ compatible = "mediatek,mt6360-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RGB>;
+ led-max-microamp = <24000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ led-max-microamp = <150000>;
+ };
+ led@4 {
+ reg = <4>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <1>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ led@5 {
+ reg = <5>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <2>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ };
+
+ regulators {
+ compatible = "mediatek,mt6360-regulator";
+ LDO_VIN3-supply = <&BUCK2>;
+ buck1 {
+ regulator-compatible = "BUCK1";
+ regulator-name = "mt6360,buck1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ };
+ BUCK2: buck2 {
+ regulator-compatible = "BUCK2";
+ regulator-name = "mt6360,buck2";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ };
+ ldo6 {
+ regulator-compatible = "LDO6";
+ regulator-name = "mt6360,ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo7 {
+ regulator-compatible = "LDO7";
+ regulator-name = "mt6360,ldo7";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo1 {
+ regulator-compatible = "LDO1";
+ regulator-name = "mt6360,ldo1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo2 {
+ regulator-compatible = "LDO2";
+ regulator-name = "mt6360,ldo2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo3 {
+ regulator-compatible = "LDO3";
+ regulator-name = "mt6360,ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo5 {
+ regulator-compatible = "LDO5";
+ regulator-name = "mt6360,ldo5";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ };
+
+ tcpc {
+ compatible = "mediatek,mt6360-tcpc";
+ interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "PD_IRQB";
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&usb_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&usb_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&dp_aux>;
+ };
+ };
+ };
+ };
+ };
+
+ };
+ };
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
@ 2022-04-27 8:03 ` Gene Chen
0 siblings, 0 replies; 21+ messages in thread
From: Gene Chen @ 2022-04-27 8:03 UTC (permalink / raw)
To: lee.jones, robh+dt, krzysztof.kozlowski+dt, matthias.bgg, pavel
Cc: devicetree, linux-leds, linux-arm-kernel, linux-mediatek,
linux-kernel, gene_chen, cy_huang
From: Gene Chen <gene_chen@richtek.com>
Add bindings for the Mediatek MT6360
Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
.../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
1 file changed, 258 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
diff --git a/Documentation/devicetree/bindings/mfd/mt6360.yaml b/Documentation/devicetree/bindings/mfd/mt6360.yaml
new file mode 100644
index 000000000000..2c0c5df16b00
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6360.yaml
@@ -0,0 +1,258 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 PMIC from MediaTek Integrated IC
+
+maintainers:
+ - Gene Chen <gene_chen@richtek.com>
+
+description: |
+ MT6360 is a PMIC device with the following sub modules.
+ It is interfaced to host controller using I2C interface.
+
+ This document describes the binding for PMIC device and its sub module.
+
+properties:
+ compatible:
+ const: mediatek,mt6360
+
+ reg:
+ description: I2C device address.
+ maxItems: 1
+
+ wakeup-source: true
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ enum:
+ - IRQB
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+ description:
+ The first cell is the IRQ number.
+
+ regulators:
+ $ref: ../regulator/mt6360-regulator.yaml
+
+ charger:
+ $ref: ../power/supply/mt6360_charger.yaml
+
+ tcpc:
+ $ref: ../usb/mediatek,mt6360-tcpc.yaml
+
+ led-controller:
+ $ref: ../leds/leds-mt6360.yaml
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+ #include <dt-bindings/leds/common.h>
+ #include <dt-bindings/usb/pd.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mt6360@34 {
+ compatible = "mediatek,mt6360";
+ reg = <0x34>;
+ wakeup-source;
+ interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "IRQB";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ mt6360_charger: charger {
+ compatible = "mediatek,mt6360-chg";
+ richtek,vinovp-microvolt = <14500000>;
+
+ otg_vbus_regulator: usb-otg-vbus-regulator {
+ regulator-compatible = "usb-otg-vbus";
+ regulator-name = "usb-otg-vbus";
+ regulator-min-microvolt = <4425000>;
+ regulator-max-microvolt = <5825000>;
+ };
+ };
+
+ led-controller {
+ compatible = "mediatek,mt6360-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RGB>;
+ led-max-microamp = <24000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_WHITE>;
+ led-max-microamp = <150000>;
+ };
+ led@4 {
+ reg = <4>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <1>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ led@5 {
+ reg = <5>;
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ function-enumerator = <2>;
+ led-max-microamp = <200000>;
+ flash-max-microamp = <500000>;
+ flash-max-timeout-us = <1024000>;
+ };
+ };
+
+ regulators {
+ compatible = "mediatek,mt6360-regulator";
+ LDO_VIN3-supply = <&BUCK2>;
+ buck1 {
+ regulator-compatible = "BUCK1";
+ regulator-name = "mt6360,buck1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ };
+ BUCK2: buck2 {
+ regulator-compatible = "BUCK2";
+ regulator-name = "mt6360,buck2";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ };
+ ldo6 {
+ regulator-compatible = "LDO6";
+ regulator-name = "mt6360,ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo7 {
+ regulator-compatible = "LDO7";
+ regulator-name = "mt6360,ldo7";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo1 {
+ regulator-compatible = "LDO1";
+ regulator-name = "mt6360,ldo1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo2 {
+ regulator-compatible = "LDO2";
+ regulator-name = "mt6360,ldo2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo3 {
+ regulator-compatible = "LDO3";
+ regulator-name = "mt6360,ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo5 {
+ regulator-compatible = "LDO5";
+ regulator-name = "mt6360,ldo5";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ };
+
+ tcpc {
+ compatible = "mediatek,mt6360-tcpc";
+ interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "PD_IRQB";
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&usb_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&usb_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&dp_aux>;
+ };
+ };
+ };
+ };
+ };
+
+ };
+ };
--
2.25.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
2022-04-27 8:03 ` Gene Chen
(?)
@ 2022-04-27 18:51 ` Rob Herring
-1 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2022-04-27 18:51 UTC (permalink / raw)
To: Gene Chen
Cc: lee.jones, krzysztof.kozlowski+dt, matthias.bgg, pavel,
devicetree, linux-leds, linux-arm-kernel, linux-mediatek,
linux-kernel, gene_chen, cy_huang
On Wed, Apr 27, 2022 at 04:03:30PM +0800, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
>
> Add bindings for the Mediatek MT6360
>
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> ---
> .../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
> 1 file changed, 258 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
As I mentioned, I applied your previous version. Please send a patch on
top of it adding the child nodes.
Rob
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
@ 2022-04-27 18:51 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2022-04-27 18:51 UTC (permalink / raw)
To: Gene Chen
Cc: lee.jones, krzysztof.kozlowski+dt, matthias.bgg, pavel,
devicetree, linux-leds, linux-arm-kernel, linux-mediatek,
linux-kernel, gene_chen, cy_huang
On Wed, Apr 27, 2022 at 04:03:30PM +0800, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
>
> Add bindings for the Mediatek MT6360
>
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> ---
> .../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
> 1 file changed, 258 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
As I mentioned, I applied your previous version. Please send a patch on
top of it adding the child nodes.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
@ 2022-04-27 18:51 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2022-04-27 18:51 UTC (permalink / raw)
To: Gene Chen
Cc: lee.jones, krzysztof.kozlowski+dt, matthias.bgg, pavel,
devicetree, linux-leds, linux-arm-kernel, linux-mediatek,
linux-kernel, gene_chen, cy_huang
On Wed, Apr 27, 2022 at 04:03:30PM +0800, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
>
> Add bindings for the Mediatek MT6360
>
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> ---
> .../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
> 1 file changed, 258 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
As I mentioned, I applied your previous version. Please send a patch on
top of it adding the child nodes.
Rob
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
2022-04-27 18:51 ` Rob Herring
(?)
@ 2022-04-28 9:30 ` Gene Chen
-1 siblings, 0 replies; 21+ messages in thread
From: Gene Chen @ 2022-04-28 9:30 UTC (permalink / raw)
To: Rob Herring
Cc: Lee Jones, krzysztof.kozlowski+dt, Matthias Brugger, Pavel Machek,
devicetree, Linux LED Subsystem, linux-arm Mailing List,
moderated list:ARM/Mediatek SoC support,
Linux Kernel Mailing List, Gene Chen, ChiYuan Huang
Rob Herring <robh@kernel.org> 於 2022年4月28日 週四 上午2:51寫道：
>
> On Wed, Apr 27, 2022 at 04:03:30PM +0800, Gene Chen wrote:
> > From: Gene Chen <gene_chen@richtek.com>
> >
> > Add bindings for the Mediatek MT6360
> >
> > Signed-off-by: Gene Chen <gene_chen@richtek.com>
> > ---
> > .../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
> > 1 file changed, 258 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
>
> As I mentioned, I applied your previous version. Please send a patch on
> top of it adding the child nodes.
>
> Rob
Hi Rob,
I try to sync latest code and can't find the mt6360 led fixed patch.
Could you please tell me how to get and apply previous version?
And should I add a tags in commit message to tell which previous
commit I based on?
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
@ 2022-04-28 9:30 ` Gene Chen
0 siblings, 0 replies; 21+ messages in thread
From: Gene Chen @ 2022-04-28 9:30 UTC (permalink / raw)
To: Rob Herring
Cc: Lee Jones, krzysztof.kozlowski+dt, Matthias Brugger, Pavel Machek,
devicetree, Linux LED Subsystem, linux-arm Mailing List,
moderated list:ARM/Mediatek SoC support,
Linux Kernel Mailing List, Gene Chen, ChiYuan Huang
Rob Herring <robh@kernel.org> 於 2022年4月28日 週四 上午2:51寫道：
>
> On Wed, Apr 27, 2022 at 04:03:30PM +0800, Gene Chen wrote:
> > From: Gene Chen <gene_chen@richtek.com>
> >
> > Add bindings for the Mediatek MT6360
> >
> > Signed-off-by: Gene Chen <gene_chen@richtek.com>
> > ---
> > .../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
> > 1 file changed, 258 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
>
> As I mentioned, I applied your previous version. Please send a patch on
> top of it adding the child nodes.
>
> Rob
Hi Rob,
I try to sync latest code and can't find the mt6360 led fixed patch.
Could you please tell me how to get and apply previous version?
And should I add a tags in commit message to tell which previous
commit I based on?
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
@ 2022-04-28 9:30 ` Gene Chen
0 siblings, 0 replies; 21+ messages in thread
From: Gene Chen @ 2022-04-28 9:30 UTC (permalink / raw)
To: Rob Herring
Cc: Lee Jones, krzysztof.kozlowski+dt, Matthias Brugger, Pavel Machek,
devicetree, Linux LED Subsystem, linux-arm Mailing List,
moderated list:ARM/Mediatek SoC support,
Linux Kernel Mailing List, Gene Chen, ChiYuan Huang
Rob Herring <robh@kernel.org> 於 2022年4月28日 週四 上午2:51寫道：
>
> On Wed, Apr 27, 2022 at 04:03:30PM +0800, Gene Chen wrote:
> > From: Gene Chen <gene_chen@richtek.com>
> >
> > Add bindings for the Mediatek MT6360
> >
> > Signed-off-by: Gene Chen <gene_chen@richtek.com>
> > ---
> > .../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
> > 1 file changed, 258 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
>
> As I mentioned, I applied your previous version. Please send a patch on
> top of it adding the child nodes.
>
> Rob
Hi Rob,
I try to sync latest code and can't find the mt6360 led fixed patch.
Could you please tell me how to get and apply previous version?
And should I add a tags in commit message to tell which previous
commit I based on?
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
2022-04-28 9:30 ` Gene Chen
(?)
@ 2022-04-28 13:17 ` Rob Herring
-1 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2022-04-28 13:17 UTC (permalink / raw)
To: Gene Chen
Cc: Lee Jones, krzysztof.kozlowski+dt, Matthias Brugger, Pavel Machek,
devicetree, Linux LED Subsystem, linux-arm Mailing List,
moderated list:ARM/Mediatek SoC support,
Linux Kernel Mailing List, Gene Chen, ChiYuan Huang
On Thu, Apr 28, 2022 at 05:30:38PM +0800, Gene Chen wrote:
> Rob Herring <robh@kernel.org> 於 2022年4月28日 週四 上午2:51寫道：
> >
> > On Wed, Apr 27, 2022 at 04:03:30PM +0800, Gene Chen wrote:
> > > From: Gene Chen <gene_chen@richtek.com>
> > >
> > > Add bindings for the Mediatek MT6360
> > >
> > > Signed-off-by: Gene Chen <gene_chen@richtek.com>
> > > ---
> > > .../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
> > > 1 file changed, 258 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
> >
> > As I mentioned, I applied your previous version. Please send a patch on
> > top of it adding the child nodes.
> >
> > Rob
>
> Hi Rob,
>
> I try to sync latest code and can't find the mt6360 led fixed patch.
> Could you please tell me how to get and apply previous version?
> And should I add a tags in commit message to tell which previous
> commit I based on?
The led fix is in my dt/linus branch and today's linux next.
The mfd patch is in my dt/next branch.
Rob
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
@ 2022-04-28 13:17 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2022-04-28 13:17 UTC (permalink / raw)
To: Gene Chen
Cc: Lee Jones, krzysztof.kozlowski+dt, Matthias Brugger, Pavel Machek,
devicetree, Linux LED Subsystem, linux-arm Mailing List,
moderated list:ARM/Mediatek SoC support,
Linux Kernel Mailing List, Gene Chen, ChiYuan Huang
On Thu, Apr 28, 2022 at 05:30:38PM +0800, Gene Chen wrote:
> Rob Herring <robh@kernel.org> 於 2022年4月28日 週四 上午2:51寫道：
> >
> > On Wed, Apr 27, 2022 at 04:03:30PM +0800, Gene Chen wrote:
> > > From: Gene Chen <gene_chen@richtek.com>
> > >
> > > Add bindings for the Mediatek MT6360
> > >
> > > Signed-off-by: Gene Chen <gene_chen@richtek.com>
> > > ---
> > > .../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
> > > 1 file changed, 258 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
> >
> > As I mentioned, I applied your previous version. Please send a patch on
> > top of it adding the child nodes.
> >
> > Rob
>
> Hi Rob,
>
> I try to sync latest code and can't find the mt6360 led fixed patch.
> Could you please tell me how to get and apply previous version?
> And should I add a tags in commit message to tell which previous
> commit I based on?
The led fix is in my dt/linus branch and today's linux next.
The mfd patch is in my dt/next branch.
Rob
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH 2/2] dt-bindings: mfd: Add bindings for the Mediatek MT6360
@ 2022-04-28 13:17 ` Rob Herring
0 siblings, 0 replies; 21+ messages in thread
From: Rob Herring @ 2022-04-28 13:17 UTC (permalink / raw)
To: Gene Chen
Cc: Lee Jones, krzysztof.kozlowski+dt, Matthias Brugger, Pavel Machek,
devicetree, Linux LED Subsystem, linux-arm Mailing List,
moderated list:ARM/Mediatek SoC support,
Linux Kernel Mailing List, Gene Chen, ChiYuan Huang
On Thu, Apr 28, 2022 at 05:30:38PM +0800, Gene Chen wrote:
> Rob Herring <robh@kernel.org> 於 2022年4月28日 週四 上午2:51寫道：
> >
> > On Wed, Apr 27, 2022 at 04:03:30PM +0800, Gene Chen wrote:
> > > From: Gene Chen <gene_chen@richtek.com>
> > >
> > > Add bindings for the Mediatek MT6360
> > >
> > > Signed-off-by: Gene Chen <gene_chen@richtek.com>
> > > ---
> > > .../devicetree/bindings/mfd/mt6360.yaml | 258 ++++++++++++++++++
> > > 1 file changed, 258 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
> >
> > As I mentioned, I applied your previous version. Please send a patch on
> > top of it adding the child nodes.
> >
> > Rob
>
> Hi Rob,
>
> I try to sync latest code and can't find the mt6360 led fixed patch.
> Could you please tell me how to get and apply previous version?
> And should I add a tags in commit message to tell which previous
> commit I based on?
The led fix is in my dt/linus branch and today's linux next.
The mfd patch is in my dt/next branch.
Rob
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 21+ messages in thread