Re: [PATCH v4 00/11] consolidated i.MX8MP HSIO/MEDIA/HDMI blk-ctrl series

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Lucas,

On Wed, May 04, 2022 at 10:56:05AM +0200, Lucas Stach wrote:
> Am Mittwoch, dem 04.05.2022 um 11:48 +0300 schrieb Laurent Pinchart:
> > On Wed, May 04, 2022 at 10:27:01AM +0200, Lucas Stach wrote:
> > > Hi Shawn,
> > > 
> > > there were some comments about the implementation of the HDMI blk-ctrl,
> > > which I don't know in which way to resolve, yet. In the meantime it
> > > would be very helpful if you could take all but the last patch of this
> > > series into your tree. They are all reviewed and tested and starting to
> > > block further work on some parts of the i.MX8MP bringup.
> > 
> > Can we decouple the HDMI blk-ctrl from the rest, to at least upstream
> > the MEDIA blk-ctrl ? That part is ready.
> 
> I've structured the series in such a way that the HDMI part is
> decoupled already. All that needs to be done is dropping the last
> patch.

I had misread you and thought you asked Shawn to only apply the last
patch. Indeed, I second the request to get the series applied without
the last patch.

> > > Am Mittwoch, dem 06.04.2022 um 17:33 +0200 schrieb Lucas Stach:
> > > > Hi all,
> > > > 
> > > > this series adds a bunch more power domains that integrate with the blk-ctrls
> > > > to the i.MX8MP. It depends on the i.MX8MP GPCv2 support series posted in [1].
> > > > 
> > > > The HSIO blk-ctrl bindings are already applied upstream, so they are not part
> > > > of this series anymore. The DT description hasn't changed, but the
> > > > implementation of the HSIO blk-ctrl driver is reworked quite a bit from the
> > > > last round of patches, so I've dropped the review/tested-by tags.
> > > > 
> > > > I've also picked up the pretty thoroughly reviewed and tested MEDIA blk-ctrl
> > > > patches from Paul and Laurent into this series, as they would conflict with
> > > > other patches from this series when applied separately. This should hopefully
> > > > make it easier for Shawn to pick things up.
> > > > 
> > > > Finally this now also adds the HDMI blk-ctrl, not part of any previous series.
> > > > This one is pretty complex and the documentation in the reference manual
> > > > appears to be inaccurate. I found at least the following issues:
> > > > 
> > > > 1. GLOBAL_XTAL24M_CLK_EN does not actually gate the 24MHz reference clock,
> > > > the PHY PLL happily locks and provides correct clocks without this clock being
> > > > ungated. It seems to gate some clock input of the HDMI TX controller instead,
> > > > register access to this controller fails without this clock.
> > > > 
> > > > 2. HDMI_RTX_RESET_CTL0 bits 6 and 7 are marked as "reserved" in the manual,
> > > > but they are actually required to be configured. Bit 6 seems to keep something
> > > > in the display pixel clock path in inactive state and Bit 7 seems to reset
> > > > the HDMI TX i2c controller.
> > > > 
> > > > The HDMI blk-ctrl part is tested quite extensively with a PoC HDMI support
> > > > patchset, which I will send out in a bit, so I'm pretty sure that the
> > > > support as implemented is working. I've put the patches last in the series
> > > > in case that this turns out to be controversial, so the other patches can
> > > > be applied independent from the HDMI support.
> > > > 
> > > > Regards,
> > > > Lucas
> > > > 
> > > > [1] https://lore.kernel.org/all/20220330104620.3600159-1-l.stach@pengutronix.de/
> > > > 
> > > > 
> > > > Laurent Pinchart (1):
> > > >   arm64: dts: imx8mp: Add MEDIAMIX power domains
> > > > 
> > > > Lucas Stach (7):
> > > >   soc: imx: imx8m-blk-ctrl: set power device name
> > > >   soc: imx: add i.MX8MP HSIO blk-ctrl
> > > >   dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
> > > >   dt-bindings: soc: add binding for i.MX8MP HDMI blk-ctrl
> > > >   soc: imx: add i.MX8MP HDMI blk-ctrl
> > > >   arm64: dts: imx8mp: add HSIO power-domains
> > > >   arm64: dts: imx8mp: add HDMI power-domains
> > > > 
> > > > Paul Elder (3):
> > > >   dt-bindings: soc: Add i.MX8MP media block control DT bindings
> > > >   soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
> > > >   arm64: dts: imx8mp: Add MEDIA_BLK_CTRL
> > > > 
> > > >  .../soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml     |  84 +++
> > > >  .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml    | 104 +++
> > > >  arch/arm64/boot/dts/freescale/imx8mp.dtsi     | 153 +++-
> > > >  drivers/soc/imx/Makefile                      |   1 +
> > > >  drivers/soc/imx/imx8m-blk-ctrl.c              | 124 +++-
> > > >  drivers/soc/imx/imx8mp-blk-ctrl.c             | 696 ++++++++++++++++++
> > > >  include/dt-bindings/power/imx8mp-power.h      |  18 +
> > > >  7 files changed, 1172 insertions(+), 8 deletions(-)
> > > >  create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
> > > >  create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
> > > >  create mode 100644 drivers/soc/imx/imx8mp-blk-ctrl.c

-- 
Regards,

Laurent Pinchart

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel