From: Greg KH <gregkh@linuxfoundation.org>
To: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Cc: stern@rowland.harvard.edu, linux-usb@vger.kernel.org,
marcel@holtmann.org
Subject: Re: [PATCH v5] USB: core: skip unconfiguration if device doesn't support it
Date: Thu, 12 May 2022 13:47:52 +0200 [thread overview]
Message-ID: <Ynzz6Jh5OeEikvfh@kroah.com> (raw)
In-Reply-To: <20220504151647.471885-1-jtornosm@redhat.com>
On Wed, May 04, 2022 at 05:16:47PM +0200, Jose Ignacio Tornos Martinez wrote:
> Some devices like Bluetooth Dongles with CSR chip (i.e. USB
> Bluetooth V4.0 Dongle by Trust) hang when they are unbound from
> 'unbind' sysfs entry and can not be bound again.
>
> For these devices, CSR chip hangs when usb configuration command
> with index 0 (used to unconfigure) is sent during disconnection.
>
> To avoid this unwanted result, it is necessary not to send this
> command, so a new quirk has been created. By default, quirk is
> not applied for any device and needs to be enabled by user.
>
> For these devices, athough device is not unconfigured, it is
> better to avoid device hanging to be able to operate. Even
> bluetooth can be previously turned off.
> On the other hand, this is not important if usb device is going to
> be bound again (normal behavior), i.e. with usbip.
>
> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
> ---
> V4 -> V5:
> - By default, quirk is not applied for any device and needs to be enabled
> by user if necessary.
> V3 -> V4:
> - Reorder quirk entries to be in numerical order according to the vendor
> ID and product ID.
> - Add patch version information.
> V2 -> V3:
> - Change subject (Bluetooth: btusb: CSR chip hangs when unbound ->
> USB: core: skip unconfiguration if device doesn't support it).
> - Improve quirk checking.
> - Allow to test quirk interactively.
> V1 -> V2:
> - Use quirk feature for the exception.
>
> Documentation/admin-guide/kernel-parameters.txt | 2 ++
> drivers/usb/core/message.c | 12 +++++++++---
> drivers/usb/core/quirks.c | 3 +++
> include/linux/usb/quirks.h | 3 +++
> 4 files changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 3f1cc5e317ed..71651b888d14 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -6183,6 +6183,8 @@
> pause after every control message);
> o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra
> delay after resetting its port);
> + p = USB_QUIRK_SKIP_UNCONFIGURE (device doesn't
> + support unconfigure);
> Example: quirks=0781:5580:bk,0a5c:5834:gij
>
> usbhid.mousepoll=
> diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
> index 4d59d927ae3e..9c6cd0c75f4f 100644
> --- a/drivers/usb/core/message.c
> +++ b/drivers/usb/core/message.c
> @@ -2108,9 +2108,15 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
> }
> kfree(new_interfaces);
>
> - ret = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0,
> - configuration, 0, NULL, 0,
> - USB_CTRL_SET_TIMEOUT, GFP_NOIO);
> + if (configuration == 0 && !cp
> + && (dev->quirks & USB_QUIRK_SKIP_UNCONFIGURE)) {
> + dev_warn(&dev->dev, "device is not unconfigured!\n");
> + ret = 0;
> + } else
> + ret = usb_control_msg_send(dev, 0, USB_REQ_SET_CONFIGURATION, 0,
> + configuration, 0, NULL, 0,
> + USB_CTRL_SET_TIMEOUT, GFP_NOIO);
> +
> if (ret && cp) {
> /*
> * All the old state is gone, so what else can we do?
> diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
> index d3c14b5ed4a1..f4cdf85a9eb6 100644
> --- a/drivers/usb/core/quirks.c
> +++ b/drivers/usb/core/quirks.c
> @@ -138,6 +138,9 @@ static int quirks_param_set(const char *value, const struct kernel_param *kp)
> case 'o':
> flags |= USB_QUIRK_HUB_SLOW_RESET;
> break;
> + case 'p':
> + flags |= USB_QUIRK_SKIP_UNCONFIGURE;
> + break;
> /* Ignore unrecognized flag characters */
> }
> }
> diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
> index eeb7c2157c72..79cb0616f394 100644
> --- a/include/linux/usb/quirks.h
> +++ b/include/linux/usb/quirks.h
> @@ -72,4 +72,7 @@
> /* device has endpoints that should be ignored */
> #define USB_QUIRK_ENDPOINT_IGNORE BIT(15)
>
> +/* device doesn't support unconfigure. */
> +#define USB_QUIRK_SKIP_UNCONFIGURE BIT(16)
> +
> #endif /* __LINUX_USB_QUIRKS_H */
> --
> 2.35.1
>
I'll drop this for now as there are no in-kernel users for this quirk
yet. When there is a need for one, please resubmit it.
thanks,
greg k-h
next prev parent reply other threads:[~2022-05-12 11:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-04 15:16 [PATCH v5] USB: core: skip unconfiguration if device doesn't support it Jose Ignacio Tornos Martinez
2022-05-04 17:54 ` Alan Stern
2022-05-12 11:47 ` Greg KH [this message]
2022-05-13 9:50 ` Jose Ignacio Tornos Martinez
2022-05-13 14:09 ` Alan Stern
2022-05-13 14:13 ` Greg KH
2022-05-13 14:26 ` Alan Stern
2022-05-13 14:46 ` Greg KH
2022-05-13 14:58 ` Jose Ignacio Tornos Martinez
2022-05-17 13:58 ` Jose Ignacio Tornos Martinez
2022-05-13 15:00 ` Bjørn Mork
2022-05-16 5:45 ` Jose Ignacio Tornos Martinez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Ynzz6Jh5OeEikvfh@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=jtornosm@redhat.com \
--cc=linux-usb@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.