[PATCH 0/2] Fix some typos in SC8180X pinctrl driver

[PATCH 0/2] Fix some typos in SC8180X pinctrl driver

[Molly Sophia]

There are some little mistakes in the sc8180x pinctrl
driver. The following patches fix them.

Molly Sophia (2):
  pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map
  pinctrl: qcom: sc8180x: Fix wrong pin numbers

 drivers/pinctrl/qcom/pinctrl-sc8180x.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

-- 
2.25.1

[PATCH 1/2] pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map

[Molly Sophia]

Currently in the wakeirq_map, gpio36 and gpio37 have the same wakeirq
number, resulting in gpio37 being unable to trigger interrupts.
It looks like that this is a typo in the wakeirq map. So fix it.

Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
---
 drivers/pinctrl/qcom/pinctrl-sc8180x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
index 6bec7f143134..b4bf009fe23e 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc8180x.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
@@ -1582,7 +1582,7 @@ static const int sc8180x_acpi_reserved_gpios[] = {
 static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = {
 	{ 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 },
 	{ 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 },
-	{ 37, 43 }, { 38, 45 }, { 39, 118 }, { 39, 125 }, { 41, 47 },
+	{ 37, 44 }, { 38, 45 }, { 39, 118 }, { 39, 125 }, { 41, 47 },
 	{ 42, 48 }, { 46, 50 }, { 47, 49 }, { 48, 51 }, { 49, 53 }, { 50, 52 },
 	{ 51, 116 }, { 51, 123 }, { 53, 54 }, { 54, 55 }, { 55, 56 },
 	{ 56, 57 }, { 58, 58 }, { 60, 60 }, { 68, 62 }, { 70, 63 }, { 76, 86 },
-- 
2.25.1

[PATCH 2/2] pinctrl: qcom: sc8180x: Fix wrong pin numbers

[Molly Sophia]

The pin numbers for UFS_RESET and SDC2_* are not
consistent in the pinctrl driver for sc8180x.
So fix it.

Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
---
 drivers/pinctrl/qcom/pinctrl-sc8180x.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
index b4bf009fe23e..704a99d2f93c 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc8180x.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
@@ -530,10 +530,10 @@ DECLARE_MSM_GPIO_PINS(187);
 DECLARE_MSM_GPIO_PINS(188);
 DECLARE_MSM_GPIO_PINS(189);
 
-static const unsigned int sdc2_clk_pins[] = { 190 };
-static const unsigned int sdc2_cmd_pins[] = { 191 };
-static const unsigned int sdc2_data_pins[] = { 192 };
-static const unsigned int ufs_reset_pins[] = { 193 };
+static const unsigned int ufs_reset_pins[] = { 190 };
+static const unsigned int sdc2_clk_pins[] = { 191 };
+static const unsigned int sdc2_cmd_pins[] = { 192 };
+static const unsigned int sdc2_data_pins[] = { 193 };
 
 enum sc8180x_functions {
 	msm_mux_adsp_ext,
-- 
2.25.1

Re: [PATCH 2/2] pinctrl: qcom: sc8180x: Fix wrong pin numbers

[Bjorn Andersson]

On Sun 07 Aug 05:26 PDT 2022, Molly Sophia wrote:

> The pin numbers for UFS_RESET and SDC2_* are not
> consistent in the pinctrl driver for sc8180x.
> So fix it.
> 
> Signed-off-by: Molly Sophia <mollysophia379@gmail.com>

Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/pinctrl/qcom/pinctrl-sc8180x.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
> index b4bf009fe23e..704a99d2f93c 100644
> --- a/drivers/pinctrl/qcom/pinctrl-sc8180x.c
> +++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
> @@ -530,10 +530,10 @@ DECLARE_MSM_GPIO_PINS(187);
>  DECLARE_MSM_GPIO_PINS(188);
>  DECLARE_MSM_GPIO_PINS(189);
>  
> -static const unsigned int sdc2_clk_pins[] = { 190 };
> -static const unsigned int sdc2_cmd_pins[] = { 191 };
> -static const unsigned int sdc2_data_pins[] = { 192 };
> -static const unsigned int ufs_reset_pins[] = { 193 };
> +static const unsigned int ufs_reset_pins[] = { 190 };
> +static const unsigned int sdc2_clk_pins[] = { 191 };
> +static const unsigned int sdc2_cmd_pins[] = { 192 };
> +static const unsigned int sdc2_data_pins[] = { 193 };
>  
>  enum sc8180x_functions {
>  	msm_mux_adsp_ext,
> -- 
> 2.25.1
> 

Re: [PATCH 1/2] pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map

[Bjorn Andersson]

On Sun 07 Aug 05:26 PDT 2022, Molly Sophia wrote:

> Currently in the wakeirq_map, gpio36 and gpio37 have the same wakeirq
> number, resulting in gpio37 being unable to trigger interrupts.
> It looks like that this is a typo in the wakeirq map. So fix it.
> 

Thank you for finding this, I've been scratching my head about the
i2c-hid interrupts on this gpio for a while now. This indeed looks like
a typo, and the documentation confirms that 44 is the correct PDC irq
line.

> Signed-off-by: Molly Sophia <mollysophia379@gmail.com>

Fixes: 97423113ec4b ("pinctrl: qcom: Add sc8180x TLMM driver")
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/pinctrl/qcom/pinctrl-sc8180x.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-sc8180x.c b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
> index 6bec7f143134..b4bf009fe23e 100644
> --- a/drivers/pinctrl/qcom/pinctrl-sc8180x.c
> +++ b/drivers/pinctrl/qcom/pinctrl-sc8180x.c
> @@ -1582,7 +1582,7 @@ static const int sc8180x_acpi_reserved_gpios[] = {
>  static const struct msm_gpio_wakeirq_map sc8180x_pdc_map[] = {
>  	{ 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 },
>  	{ 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 },
> -	{ 37, 43 }, { 38, 45 }, { 39, 118 }, { 39, 125 }, { 41, 47 },
> +	{ 37, 44 }, { 38, 45 }, { 39, 118 }, { 39, 125 }, { 41, 47 },
>  	{ 42, 48 }, { 46, 50 }, { 47, 49 }, { 48, 51 }, { 49, 53 }, { 50, 52 },
>  	{ 51, 116 }, { 51, 123 }, { 53, 54 }, { 54, 55 }, { 55, 56 },
>  	{ 56, 57 }, { 58, 58 }, { 60, 60 }, { 68, 62 }, { 70, 63 }, { 76, 86 },
> -- 
> 2.25.1
> 

Re: [PATCH 0/2] Fix some typos in SC8180X pinctrl driver

[Linus Walleij]

On Sun, Aug 7, 2022 at 2:27 PM Molly Sophia <mollysophia379@gmail.com> wrote:

> There are some little mistakes in the sc8180x pinctrl
> driver. The following patches fix them.

Both patches applied for fixes, thanks for finding this!

Yours,
Linus Walleij