* [PATCH -next] driver core: switch to use dev_err_probe() @ 2022-08-19 9:46 Yang Yingliang 2022-08-19 9:42 ` Greg KH 0 siblings, 1 reply; 5+ messages in thread From: Yang Yingliang @ 2022-08-19 9:46 UTC (permalink / raw) To: linux-kernel, rafael; +Cc: gregkh Use dev_err_probe() to simplify code and print error code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> --- drivers/base/core.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index 753e7cca0f40..e51a09f9d0ec 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -2507,11 +2507,9 @@ static ssize_t uevent_store(struct device *dev, struct device_attribute *attr, int rc; rc = kobject_synth_uevent(&dev->kobj, buf, count); - - if (rc) { - dev_err(dev, "uevent: failed to send synthetic uevent\n"); - return rc; - } + if (rc) + return dev_err_probe(dev, rc, + "uevent: failed to send synthetic uevent\n"); return count; } -- 2.25.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH -next] driver core: switch to use dev_err_probe() 2022-08-19 9:46 [PATCH -next] driver core: switch to use dev_err_probe() Yang Yingliang @ 2022-08-19 9:42 ` Greg KH 2022-08-22 2:10 ` Yang Yingliang 0 siblings, 1 reply; 5+ messages in thread From: Greg KH @ 2022-08-19 9:42 UTC (permalink / raw) To: Yang Yingliang; +Cc: linux-kernel, rafael On Fri, Aug 19, 2022 at 05:46:56PM +0800, Yang Yingliang wrote: > Use dev_err_probe() to simplify code and print error code. > > Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> > --- > drivers/base/core.c | 8 +++----- > 1 file changed, 3 insertions(+), 5 deletions(-) > > diff --git a/drivers/base/core.c b/drivers/base/core.c > index 753e7cca0f40..e51a09f9d0ec 100644 > --- a/drivers/base/core.c > +++ b/drivers/base/core.c > @@ -2507,11 +2507,9 @@ static ssize_t uevent_store(struct device *dev, struct device_attribute *attr, > int rc; > > rc = kobject_synth_uevent(&dev->kobj, buf, count); > - > - if (rc) { > - dev_err(dev, "uevent: failed to send synthetic uevent\n"); > - return rc; > - } > + if (rc) > + return dev_err_probe(dev, rc, > + "uevent: failed to send synthetic uevent\n"); I do not understand this at all, this is not on the probe path at all, so why is this function needed? Have you tested this? What was the resulting output before and after this change? thanks, greg k-h ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH -next] driver core: switch to use dev_err_probe() 2022-08-19 9:42 ` Greg KH @ 2022-08-22 2:10 ` Yang Yingliang 2022-08-22 6:09 ` Greg KH 0 siblings, 1 reply; 5+ messages in thread From: Yang Yingliang @ 2022-08-22 2:10 UTC (permalink / raw) To: Greg KH; +Cc: linux-kernel, rafael Hi, On 2022/8/19 17:42, Greg KH wrote: > On Fri, Aug 19, 2022 at 05:46:56PM +0800, Yang Yingliang wrote: >> Use dev_err_probe() to simplify code and print error code. >> >> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> >> --- >> drivers/base/core.c | 8 +++----- >> 1 file changed, 3 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/base/core.c b/drivers/base/core.c >> index 753e7cca0f40..e51a09f9d0ec 100644 >> --- a/drivers/base/core.c >> +++ b/drivers/base/core.c >> @@ -2507,11 +2507,9 @@ static ssize_t uevent_store(struct device *dev, struct device_attribute *attr, >> int rc; >> >> rc = kobject_synth_uevent(&dev->kobj, buf, count); >> - >> - if (rc) { >> - dev_err(dev, "uevent: failed to send synthetic uevent\n"); >> - return rc; >> - } >> + if (rc) >> + return dev_err_probe(dev, rc, >> + "uevent: failed to send synthetic uevent\n"); > I do not understand this at all, this is not on the probe path at all, > so why is this function needed? > > Have you tested this? What was the resulting output before and after > this change? Yes, after this change, the error code will be print. > > thanks, > > greg k-h > . ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH -next] driver core: switch to use dev_err_probe() 2022-08-22 2:10 ` Yang Yingliang @ 2022-08-22 6:09 ` Greg KH 2022-08-22 6:35 ` Yang Yingliang 0 siblings, 1 reply; 5+ messages in thread From: Greg KH @ 2022-08-22 6:09 UTC (permalink / raw) To: Yang Yingliang; +Cc: linux-kernel, rafael On Mon, Aug 22, 2022 at 10:10:22AM +0800, Yang Yingliang wrote: > Hi, > > On 2022/8/19 17:42, Greg KH wrote: > > On Fri, Aug 19, 2022 at 05:46:56PM +0800, Yang Yingliang wrote: > > > Use dev_err_probe() to simplify code and print error code. > > > > > > Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> > > > --- > > > drivers/base/core.c | 8 +++----- > > > 1 file changed, 3 insertions(+), 5 deletions(-) > > > > > > diff --git a/drivers/base/core.c b/drivers/base/core.c > > > index 753e7cca0f40..e51a09f9d0ec 100644 > > > --- a/drivers/base/core.c > > > +++ b/drivers/base/core.c > > > @@ -2507,11 +2507,9 @@ static ssize_t uevent_store(struct device *dev, struct device_attribute *attr, > > > int rc; > > > rc = kobject_synth_uevent(&dev->kobj, buf, count); > > > - > > > - if (rc) { > > > - dev_err(dev, "uevent: failed to send synthetic uevent\n"); > > > - return rc; > > > - } > > > + if (rc) > > > + return dev_err_probe(dev, rc, > > > + "uevent: failed to send synthetic uevent\n"); > > I do not understand this at all, this is not on the probe path at all, > > so why is this function needed? > > > > Have you tested this? What was the resulting output before and after > > this change? > Yes, after this change, the error code will be print. You did not answer my question. Again, this is not on the probe() callback path, so why are you wanting to call dev_err_probe()? thanks, greg k-h ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH -next] driver core: switch to use dev_err_probe() 2022-08-22 6:09 ` Greg KH @ 2022-08-22 6:35 ` Yang Yingliang 0 siblings, 0 replies; 5+ messages in thread From: Yang Yingliang @ 2022-08-22 6:35 UTC (permalink / raw) To: Greg KH; +Cc: linux-kernel, rafael On 2022/8/22 14:09, Greg KH wrote: > On Mon, Aug 22, 2022 at 10:10:22AM +0800, Yang Yingliang wrote: >> Hi, >> >> On 2022/8/19 17:42, Greg KH wrote: >>> On Fri, Aug 19, 2022 at 05:46:56PM +0800, Yang Yingliang wrote: >>>> Use dev_err_probe() to simplify code and print error code. >>>> >>>> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> >>>> --- >>>> drivers/base/core.c | 8 +++----- >>>> 1 file changed, 3 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/drivers/base/core.c b/drivers/base/core.c >>>> index 753e7cca0f40..e51a09f9d0ec 100644 >>>> --- a/drivers/base/core.c >>>> +++ b/drivers/base/core.c >>>> @@ -2507,11 +2507,9 @@ static ssize_t uevent_store(struct device *dev, struct device_attribute *attr, >>>> int rc; >>>> rc = kobject_synth_uevent(&dev->kobj, buf, count); >>>> - >>>> - if (rc) { >>>> - dev_err(dev, "uevent: failed to send synthetic uevent\n"); >>>> - return rc; >>>> - } >>>> + if (rc) >>>> + return dev_err_probe(dev, rc, >>>> + "uevent: failed to send synthetic uevent\n"); >>> I do not understand this at all, this is not on the probe path at all, >>> so why is this function needed? >>> >>> Have you tested this? What was the resulting output before and after >>> this change? >> Yes, after this change, the error code will be print. > You did not answer my question. > > Again, this is not on the probe() callback path, so why are you wanting > to call dev_err_probe()? I was trying to simplify the code, I think I misuse the helper, you can ignore this patch. Thanks, Yang > > thanks, > > greg k-h > . ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-08-22 6:36 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-08-19 9:46 [PATCH -next] driver core: switch to use dev_err_probe() Yang Yingliang 2022-08-19 9:42 ` Greg KH 2022-08-22 2:10 ` Yang Yingliang 2022-08-22 6:09 ` Greg KH 2022-08-22 6:35 ` Yang Yingliang
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.