All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	openbmc@lists.ozlabs.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 1/1] pinctrl: wpcm450: Correct the fwnode_irq_get() return value check
Date: Wed, 7 Sep 2022 23:04:40 +0200	[thread overview]
Message-ID: <YxkHaBKtiO9zVuKM@probook> (raw)
In-Reply-To: <20220905191408.73794-1-andriy.shevchenko@linux.intel.com>

[-- Attachment #1: Type: text/plain, Size: 1471 bytes --]

Hello,

On Mon, Sep 05, 2022 at 10:14:08PM +0300, Andy Shevchenko wrote:
> fwnode_irq_get() may return all possible signed values, such as Linux
> error code. Fix the code to handle this properly.

It would be good to note explicitly here what a return value of zero
means, i.e., as the documentation of of_irq_get says, "IRQ mapping
failure", and why it should result in skipping this IRQ.

> Fixes: a1d1e0e3d80a ("pinctrl: nuvoton: Add driver for WPCM450")
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/pinctrl/nuvoton/pinctrl-wpcm450.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c b/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c
> index 0dbeb91f0bf2..8193b92da403 100644
> --- a/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c
> +++ b/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c
> @@ -1081,10 +1081,13 @@ static int wpcm450_gpio_register(struct platform_device *pdev,
>  
>  		girq->num_parents = 0;
>  		for (i = 0; i < WPCM450_NUM_GPIO_IRQS; i++) {
> -			int irq = fwnode_irq_get(child, i);
> +			int irq;
>  
> +			irq = fwnode_irq_get(child, i);

(Unneccesary churn, but I'll allow it)

>  			if (irq < 0)
>  				break;
> +			if (!irq)
> +				continue;

Since irq == 0 seems to be an error condition, the following seems fine
to me, and simpler:

-			if (irq < 0)
+			if (irq <= 0)
 				break;



Thanks,
Jonathan

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-gpio@vger.kernel.org,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Jonathan Neuschäfer" <j.neuschaefer@gmx.net>,
	linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org
Subject: Re: [PATCH v1 1/1] pinctrl: wpcm450: Correct the fwnode_irq_get() return value check
Date: Wed, 7 Sep 2022 23:04:40 +0200	[thread overview]
Message-ID: <YxkHaBKtiO9zVuKM@probook> (raw)
In-Reply-To: <20220905191408.73794-1-andriy.shevchenko@linux.intel.com>

[-- Attachment #1: Type: text/plain, Size: 1471 bytes --]

Hello,

On Mon, Sep 05, 2022 at 10:14:08PM +0300, Andy Shevchenko wrote:
> fwnode_irq_get() may return all possible signed values, such as Linux
> error code. Fix the code to handle this properly.

It would be good to note explicitly here what a return value of zero
means, i.e., as the documentation of of_irq_get says, "IRQ mapping
failure", and why it should result in skipping this IRQ.

> Fixes: a1d1e0e3d80a ("pinctrl: nuvoton: Add driver for WPCM450")
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/pinctrl/nuvoton/pinctrl-wpcm450.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c b/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c
> index 0dbeb91f0bf2..8193b92da403 100644
> --- a/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c
> +++ b/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c
> @@ -1081,10 +1081,13 @@ static int wpcm450_gpio_register(struct platform_device *pdev,
>  
>  		girq->num_parents = 0;
>  		for (i = 0; i < WPCM450_NUM_GPIO_IRQS; i++) {
> -			int irq = fwnode_irq_get(child, i);
> +			int irq;
>  
> +			irq = fwnode_irq_get(child, i);

(Unneccesary churn, but I'll allow it)

>  			if (irq < 0)
>  				break;
> +			if (!irq)
> +				continue;

Since irq == 0 seems to be an error condition, the following seems fine
to me, and simpler:

-			if (irq < 0)
+			if (irq <= 0)
 				break;



Thanks,
Jonathan

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2022-09-07 21:05 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-05 19:14 [PATCH v1 1/1] pinctrl: wpcm450: Correct the fwnode_irq_get() return value check Andy Shevchenko
2022-09-07 21:04 ` Jonathan Neuschäfer [this message]
2022-09-07 21:04   ` Jonathan Neuschäfer
2022-09-08 10:01   ` Andy Shevchenko
2022-09-08 10:01     ` Andy Shevchenko
2022-09-09 21:00     ` Jonathan Neuschäfer
2022-09-09 21:00       ` Jonathan Neuschäfer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YxkHaBKtiO9zVuKM@probook \
    --to=j.neuschaefer@gmx.net \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.