Re: [PATCH] clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks

From: Abel Vesa <abel.vesa@linaro.org>
To: Han Xu <han.xu@nxp.com>, Stephen Boyd <sboyd@kernel.org>
Cc: Abel Vesa <abelvesa@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	"open list:NXP i.MX CLOCK DRIVERS" <linux-clk@vger.kernel.org>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
	<linux-arm-kernel@lists.infradead.org>,
	open list <linux-kernel@vger.kernel.org>,
	miquel.raynal@bootlin.com, linux-mtd@lists.infradead.org
Subject: Re: [PATCH] clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks
Date: Thu, 15 Sep 2022 01:11:02 +0300	[thread overview]
Message-ID: <YyJRdnTpoM7kw/Bt@linaro.org> (raw)
In-Reply-To: <20220914201049.3508104-1-han.xu@nxp.com>

On 22-09-14 15:10:48, Han Xu wrote:
> There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag
> should not be used. For instance, the default parent clock for QSPI is
> pll2_bus, which is also the parent clock for quite a few modules, such
> as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system
> hang due to pll2_bus rate changed.
> 
> Fixes: f1541e15e38e ("clk: imx6sx: Switch to clk_hw based API")
> Signed-off-by: Han Xu <han.xu@nxp.com>

Acked-by: Abel Vesa <abel.vesa@linaro.org>

Stephen, will you be picking this?

> ---
>  drivers/clk/imx/clk-imx6sx.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-imx6sx.c b/drivers/clk/imx/clk-imx6sx.c
> index 2301d8fb8c76..1e53e366cde7 100644
> --- a/drivers/clk/imx/clk-imx6sx.c
> +++ b/drivers/clk/imx/clk-imx6sx.c
> @@ -324,13 +324,13 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
>  	hws[IMX6SX_CLK_SSI3_SEL]           = imx_clk_hw_mux("ssi3_sel",         base + 0x1c,  14,     2,      ssi_sels,          ARRAY_SIZE(ssi_sels));
>  	hws[IMX6SX_CLK_SSI2_SEL]           = imx_clk_hw_mux("ssi2_sel",         base + 0x1c,  12,     2,      ssi_sels,          ARRAY_SIZE(ssi_sels));
>  	hws[IMX6SX_CLK_SSI1_SEL]           = imx_clk_hw_mux("ssi1_sel",         base + 0x1c,  10,     2,      ssi_sels,          ARRAY_SIZE(ssi_sels));
> -	hws[IMX6SX_CLK_QSPI1_SEL]          = imx_clk_hw_mux_flags("qspi1_sel", base + 0x1c,  7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT);
> +	hws[IMX6SX_CLK_QSPI1_SEL]          = imx_clk_hw_mux("qspi1_sel",        base + 0x1c,  7,      3,      qspi1_sels,        ARRAY_SIZE(qspi1_sels);
>  	hws[IMX6SX_CLK_PERCLK_SEL]         = imx_clk_hw_mux("perclk_sel",       base + 0x1c,  6,      1,      perclk_sels,       ARRAY_SIZE(perclk_sels));
>  	hws[IMX6SX_CLK_VID_SEL]            = imx_clk_hw_mux("vid_sel",          base + 0x20,  21,     3,      vid_sels,          ARRAY_SIZE(vid_sels));
>  	hws[IMX6SX_CLK_ESAI_SEL]           = imx_clk_hw_mux("esai_sel",         base + 0x20,  19,     2,      audio_sels,        ARRAY_SIZE(audio_sels));
>  	hws[IMX6SX_CLK_CAN_SEL]            = imx_clk_hw_mux("can_sel",          base + 0x20,  8,      2,      can_sels,          ARRAY_SIZE(can_sels));
>  	hws[IMX6SX_CLK_UART_SEL]           = imx_clk_hw_mux("uart_sel",         base + 0x24,  6,      1,      uart_sels,         ARRAY_SIZE(uart_sels));
> -	hws[IMX6SX_CLK_QSPI2_SEL]          = imx_clk_hw_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT);
> +	hws[IMX6SX_CLK_QSPI2_SEL]          = imx_clk_hw_mux("qspi2_sel",        base + 0x2c,  15,     3,      qspi2_sels,        ARRAY_SIZE(qspi2_sels);
>  	hws[IMX6SX_CLK_SPDIF_SEL]          = imx_clk_hw_mux("spdif_sel",        base + 0x30,  20,     2,      audio_sels,        ARRAY_SIZE(audio_sels));
>  	hws[IMX6SX_CLK_AUDIO_SEL]          = imx_clk_hw_mux("audio_sel",        base + 0x30,  7,      2,      audio_sels,        ARRAY_SIZE(audio_sels));
>  	hws[IMX6SX_CLK_ENET_PRE_SEL]       = imx_clk_hw_mux("enet_pre_sel",     base + 0x34,  15,     3,      enet_pre_sels,     ARRAY_SIZE(enet_pre_sels));
> -- 
> 2.25.1
> 