[PATCH 0/5] hisi_sas: Misc patches and cleanups

[PATCH 0/5] hisi_sas: Misc patches and cleanups

[Yihang Li]

This series contains some minor bugfix and general tidying:
- Add host_tagset_enable module param for v3 hw to show only one queue
  capability to the kernel
- Ignore the soft reset result by calling I_T_nexus after the SATA disk
  is soft reset
- General minor tidying

Thanks!

Xingui Yang (1):
  scsi: hisi_sas: Add host_tagset_enable module param for v3 hw

Yihang Li (4):
  scsi: hisi_sas: Use macro instead of magic number
  scsi: hisi_sas: Code style cleanup
  scsi: hisi_sas: Call I_T_nexus after soft reset for SATA disk
  scsi: hisi_sas: Wait until eh is recovered

 drivers/scsi/hisi_sas/hisi_sas.h       |  51 +++--
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  91 ++++----
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |   2 +-
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c |   6 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 283 ++++++++++++++++---------
 5 files changed, 264 insertions(+), 169 deletions(-)

-- 
2.33.0

[PATCH 1/5] scsi: hisi_sas: Add host_tagset_enable module param for v3 hw

[Yihang Li]

From: Xingui Yang <yangxingui@huawei.com>

After driver exposes all HW queues and application submits IO to multiple
queues in parallel, if NCQ and non-NCQ commands are mixed to sata disk,
ata_qc_defer() causes non-NCQ commands to be requeued and possibly repeated
forever. Add host_tagset_enable module parameter to expose multiple queues
for v3 hw.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Yihang Li <liyihang9@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  1 +
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 10 +++++----
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 30 ++++++++++++++++++++++++--
 3 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index e17f5d8226bf..f93eefe68ccb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -456,6 +456,7 @@ struct hisi_hba {
 	u32 intr_coal_count;	/* Interrupt count to coalesce */
 
 	int cq_nvecs;
+	unsigned int *reply_map;
 
 	/* bist */
 	enum sas_linkrate debugfs_bist_linkrate;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7a484ad0f9ab..3d2e8ec7f110 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -489,11 +489,12 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
 	struct asd_sas_port *sas_port = device->port;
 	struct hisi_sas_device *sas_dev = device->lldd_dev;
 	bool internal_abort = sas_is_internal_abort(task);
+	struct request *rq = sas_task_find_rq(task);
 	struct hisi_sas_dq *dq = NULL;
 	struct hisi_sas_port *port;
 	struct hisi_hba *hisi_hba;
 	struct hisi_sas_slot *slot;
-	struct request *rq = NULL;
+	unsigned int dq_index;
 	struct device *dev;
 	int rc;
 
@@ -548,9 +549,10 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
 				return -ECOMM;
 		}
 
-		rq = sas_task_find_rq(task);
-		if (rq) {
-			unsigned int dq_index;
+		if (hisi_hba->reply_map) {
+			dq_index = hisi_hba->reply_map[raw_smp_processor_id()];
+			dq = &hisi_hba->dq[dq_index];
+		} else if (rq) {
 			u32 blk_tag;
 
 			blk_tag = blk_mq_unique_tag(rq);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 6a0656f3b596..a1f0a59a8c8d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -561,7 +561,12 @@ MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=0x0 ");
 /* the index of iopoll queues are bigger than interrupt queues' */
 static int experimental_iopoll_q_cnt;
 module_param(experimental_iopoll_q_cnt, int, 0444);
-MODULE_PARM_DESC(experimental_iopoll_q_cnt, "number of queues to be used as poll mode, def=0");
+MODULE_PARM_DESC(experimental_iopoll_q_cnt, "number of queues to be used as poll mode, def=0 &\n\t\t"
+		"this parameter is effective only if host_tagset_enable=1");
+
+static bool host_tagset_enable = true;
+module_param(host_tagset_enable, bool, 0444);
+MODULE_PARM_DESC(host_tagset_enable, "shared host tagset enable (0-1), def=1");
 
 static int debugfs_snapshot_regs_v3_hw(struct hisi_hba *hisi_hba);
 
@@ -2574,6 +2579,18 @@ static int interrupt_preinit_v3_hw(struct hisi_hba *hisi_hba)
 	hisi_hba->cq_nvecs = vectors - BASE_VECTORS_V3_HW - hisi_hba->iopoll_q_cnt;
 	shost->nr_hw_queues = hisi_hba->cq_nvecs + hisi_hba->iopoll_q_cnt;
 
+	if (!host_tagset_enable) {
+		shost->host_tagset = 0;
+		shost->nr_hw_queues = 1;
+		hisi_hba->reply_map = devm_kcalloc(&pdev->dev, nr_cpu_ids,
+				sizeof(unsigned int),
+				GFP_KERNEL);
+		if (!hisi_hba->reply_map) {
+			hisi_sas_v3_free_vectors(hisi_hba);
+			return -ENOMEM;
+		}
+	}
+
 	return devm_add_action(&pdev->dev, hisi_sas_v3_free_vectors, pdev);
 }
 
@@ -2615,6 +2632,7 @@ static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
 		int nr = hisi_sas_intr_conv ? 16 : 16 + i;
 		unsigned long irqflags = hisi_sas_intr_conv ? IRQF_SHARED :
 							      IRQF_ONESHOT;
+		int cpu;
 
 		cq->irq_no = pci_irq_vector(pdev, nr);
 		rc = devm_request_threaded_irq(dev, cq->irq_no,
@@ -2632,6 +2650,9 @@ static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
 			dev_err(dev, "could not get cq%d irq affinity!\n", i);
 			return -ENOENT;
 		}
+		if (!host_tagset_enable)
+			for_each_cpu(cpu, cq->irq_mask)
+				hisi_hba->reply_map[cpu] = i;
 	}
 
 	return 0;
@@ -3318,6 +3339,9 @@ static void hisi_sas_map_queues(struct Scsi_Host *shost)
 	struct blk_mq_queue_map *qmap;
 	int i, qoff;
 
+	if (shost->nr_hw_queues == 1)
+		return;
+
 	for (i = 0, qoff = 0; i < shost->nr_maps; i++) {
 		qmap = &shost->tag_set.map[i];
 		if (i == HCTX_TYPE_DEFAULT) {
@@ -3435,7 +3459,9 @@ hisi_sas_shost_alloc_pci(struct pci_dev *pdev)
 	if (check_fw_info_v3_hw(hisi_hba) < 0)
 		goto err_out;
 
-	if (experimental_iopoll_q_cnt < 0 ||
+	if (!host_tagset_enable)
+		dev_info(dev, "Shared host tag set disabled, iopoll queue cnt uses default 0\n");
+	else if (experimental_iopoll_q_cnt < 0 ||
 		experimental_iopoll_q_cnt >= hisi_hba->queue_count)
 		dev_err(dev, "iopoll queue count %d cannot exceed or equal 16, using default 0\n",
 			experimental_iopoll_q_cnt);
-- 
2.33.0

Re: [PATCH 1/5] scsi: hisi_sas: Add host_tagset_enable module param for v3 hw

[John Garry]

On 29/03/2025 07:32, Yihang Li wrote:

+

> From: Xingui Yang<yangxingui@huawei.com>
> 
> After driver exposes all HW queues and application submits IO to multiple
> queues in parallel, if NCQ and non-NCQ commands are mixed to sata disk,
> ata_qc_defer() causes non-NCQ commands to be requeued and possibly repeated
> forever.

I don't think that it is a good idea to mask out bugs with module 
parameters.

Was this the same libata/libsas issue reported some time ago?

> Add host_tagset_enable module parameter to expose multiple queues
> for v3 hw.
> 
> Signed-off-by: Xingui Yang<yangxingui@huawei.com>
> Signed-off-by: Yihang Li<liyihang9@huawei.com>

Re: [PATCH 1/5] scsi: hisi_sas: Add host_tagset_enable module param for v3 hw

[yangxingui]

Hi，John

On 2025/3/29 16:50, John Garry wrote:
> On 29/03/2025 07:32, Yihang Li wrote:
> 
> +
> 
>> From: Xingui Yang<yangxingui@huawei.com>
>>
>> After driver exposes all HW queues and application submits IO to multiple
>> queues in parallel, if NCQ and non-NCQ commands are mixed to sata disk,
>> ata_qc_defer() causes non-NCQ commands to be requeued and possibly 
>> repeated
>> forever.
> 
> I don't think that it is a good idea to mask out bugs with module 
> parameters.
> 
> Was this the same libata/libsas issue reported some time ago?

Yeah，related to this issue: 
https://lore.kernel.org/linux-block/eef1e927-c9b2-c61d-7f48-92e65d8b0418@huawei.com/

And, Niklas tried to help fix this problem: 
https://lore.kernel.org/linux-scsi/ZynmfyDA9R-lrW71@ryzen/

Considering that there is no formal solution yet. And our users rarely 
use SATA disks and SAS disks together on a single machine. For this 
reason, they can flexibly turn off the exposure of multiple queues in 
the scenario of using only SATA disks. In addition, it is also 
convenient to conduct performance comparison tests to expose multiple 
hardware queues and single queues.

Thanks,
Xingui

Re: [PATCH 1/5] scsi: hisi_sas: Add host_tagset_enable module param for v3 hw

[John Garry]

On 29/03/2025 09:49, yangxingui wrote:
> Hi，John
> 
> On 2025/3/29 16:50, John Garry wrote:
>> On 29/03/2025 07:32, Yihang Li wrote:
>>
>> +
>>
>>> From: Xingui Yang<yangxingui@huawei.com>
>>>
>>> After driver exposes all HW queues and application submits IO to 
>>> multiple
>>> queues in parallel, if NCQ and non-NCQ commands are mixed to sata disk,
>>> ata_qc_defer() causes non-NCQ commands to be requeued and possibly 
>>> repeated
>>> forever.
>>
>> I don't think that it is a good idea to mask out bugs with module 
>> parameters.
>>
>> Was this the same libata/libsas issue reported some time ago?
> 
> Yeah，related to this issue: https://lore.kernel.org/linux-block/ 
> eef1e927-c9b2-c61d-7f48-92e65d8b0418@huawei.com/
> 
> And, Niklas tried to help fix this problem: https://lore.kernel.org/ 
> linux-scsi/ZynmfyDA9R-lrW71@ryzen/
> 
> Considering that there is no formal solution yet. And our users rarely 
> use SATA disks and SAS disks together on a single machine. For this 
> reason, they can flexibly turn off the exposure of multiple queues in 
> the scenario of using only SATA disks. In addition, it is also 
> convenient to conduct performance comparison tests to expose multiple 
> hardware queues and single queues.
> 

The change in this series does not even solve the issues, as:
- you do not guarantee no SAS/SATA mix without that module param enabled
- the driver still uses managed interrupts in both cases, so with 
disabling host_tagset you are now exposed to CPU hotplug issue of IO 
being in-flight when HW queue interrupt is shutdown

And pm8001 driver will have the same issue, so we need to find a proper fix.

Let me consider this issue more.

Re: [PATCH 1/5] scsi: hisi_sas: Add host_tagset_enable module param for v3 hw

[yangxingui]

On 2025/3/31 15:43, John Garry wrote:
> On 29/03/2025 09:49, yangxingui wrote:
>> Hi，John
>>
>> On 2025/3/29 16:50, John Garry wrote:
>>> On 29/03/2025 07:32, Yihang Li wrote:
>>>
>>> +
>>>
>>>> From: Xingui Yang<yangxingui@huawei.com>
>>>>
>>>> After driver exposes all HW queues and application submits IO to 
>>>> multiple
>>>> queues in parallel, if NCQ and non-NCQ commands are mixed to sata disk,
>>>> ata_qc_defer() causes non-NCQ commands to be requeued and possibly 
>>>> repeated
>>>> forever.
>>>
>>> I don't think that it is a good idea to mask out bugs with module 
>>> parameters.
>>>
>>> Was this the same libata/libsas issue reported some time ago?
>>
>> Yeah，related to this issue: https://lore.kernel.org/linux-block/ 
>> eef1e927-c9b2-c61d-7f48-92e65d8b0418@huawei.com/
>>
>> And, Niklas tried to help fix this problem: https://lore.kernel.org/ 
>> linux-scsi/ZynmfyDA9R-lrW71@ryzen/
>>
>> Considering that there is no formal solution yet. And our users rarely 
>> use SATA disks and SAS disks together on a single machine. For this 
>> reason, they can flexibly turn off the exposure of multiple queues in 
>> the scenario of using only SATA disks. In addition, it is also 
>> convenient to conduct performance comparison tests to expose multiple 
>> hardware queues and single queues.
>>
> 
> The change in this series does not even solve the issues, as:
> - you do not guarantee no SAS/SATA mix without that module param enabled
> - the driver still uses managed interrupts in both cases, so with 
> disabling host_tagset you are now exposed to CPU hotplug issue of IO 
> being in-flight when HW queue interrupt is shutdown

Yes, there will be such problems.

> 
> And pm8001 driver will have the same issue, so we need to find a proper 
> fix.
> 
> Let me consider this issue more.

OK.

Thanks,
Xingui

Re: [PATCH 1/5] scsi: hisi_sas: Add host_tagset_enable module param for v3 hw

[Niklas Cassel]

Hello Xingui,

On Sat, Mar 29, 2025 at 05:49:47PM +0800, yangxingui wrote:
> Hi，John
> 
> On 2025/3/29 16:50, John Garry wrote:
> > On 29/03/2025 07:32, Yihang Li wrote:
> > 
> > +
> > 
> > > From: Xingui Yang<yangxingui@huawei.com>
> > > 
> > > After driver exposes all HW queues and application submits IO to multiple
> > > queues in parallel, if NCQ and non-NCQ commands are mixed to sata disk,
> > > ata_qc_defer() causes non-NCQ commands to be requeued and possibly
> > > repeated
> > > forever.
> > 
> > I don't think that it is a good idea to mask out bugs with module
> > parameters.
> > 
> > Was this the same libata/libsas issue reported some time ago?
> 
> Yeah，related to this issue: https://lore.kernel.org/linux-block/eef1e927-c9b2-c61d-7f48-92e65d8b0418@huawei.com/
> 
> And, Niklas tried to help fix this problem:
> https://lore.kernel.org/linux-scsi/ZynmfyDA9R-lrW71@ryzen/
> 
> Considering that there is no formal solution yet. And our users rarely use
> SATA disks and SAS disks together on a single machine. For this reason, they
> can flexibly turn off the exposure of multiple queues in the scenario of
> using only SATA disks. In addition, it is also convenient to conduct
> performance comparison tests to expose multiple hardware queues and single
> queues.

The solution I sent is not good since it relies on EH.

One would need to come up with a better solution to fix libsas drivers,
possibly a workqueue.

I think Damien is planning to add a workqueue submit path to libata,
if so, perhaps we could base a better solution on top of that.


Kind regards,
Niklas

Re: [PATCH 1/5] scsi: hisi_sas: Add host_tagset_enable module param for v3 hw

[Yihang Li]

Hi all,

Thanks for the discussion. I will remove this patch for this series and send a new version later.

Thanks,
Yihang

On 2025/3/31 16:40, Niklas Cassel wrote:
> Hello Xingui,
> 
> On Sat, Mar 29, 2025 at 05:49:47PM +0800, yangxingui wrote:
>> Hi，John
>>
>> On 2025/3/29 16:50, John Garry wrote:
>>> On 29/03/2025 07:32, Yihang Li wrote:
>>>
>>> +
>>>
>>>> From: Xingui Yang<yangxingui@huawei.com>
>>>>
>>>> After driver exposes all HW queues and application submits IO to multiple
>>>> queues in parallel, if NCQ and non-NCQ commands are mixed to sata disk,
>>>> ata_qc_defer() causes non-NCQ commands to be requeued and possibly
>>>> repeated
>>>> forever.
>>>
>>> I don't think that it is a good idea to mask out bugs with module
>>> parameters.
>>>
>>> Was this the same libata/libsas issue reported some time ago?
>>
>> Yeah，related to this issue: https://lore.kernel.org/linux-block/eef1e927-c9b2-c61d-7f48-92e65d8b0418@huawei.com/
>>
>> And, Niklas tried to help fix this problem:
>> https://lore.kernel.org/linux-scsi/ZynmfyDA9R-lrW71@ryzen/
>>
>> Considering that there is no formal solution yet. And our users rarely use
>> SATA disks and SAS disks together on a single machine. For this reason, they
>> can flexibly turn off the exposure of multiple queues in the scenario of
>> using only SATA disks. In addition, it is also convenient to conduct
>> performance comparison tests to expose multiple hardware queues and single
>> queues.
> 
> The solution I sent is not good since it relies on EH.
> 
> One would need to come up with a better solution to fix libsas drivers,
> possibly a workqueue.
> 
> I think Damien is planning to add a workqueue submit path to libata,
> if so, perhaps we could base a better solution on top of that.
> 
> 
> Kind regards,
> Niklas
> 
> .
> 

Re: [PATCH 1/5] scsi: hisi_sas: Add host_tagset_enable module param for v3 hw

[yangxingui]

On 2025/3/31 16:40, Niklas Cassel wrote:
> Hello Xingui,
> 
> On Sat, Mar 29, 2025 at 05:49:47PM +0800, yangxingui wrote:
>> Hi，John
>>
>> On 2025/3/29 16:50, John Garry wrote:
>>> On 29/03/2025 07:32, Yihang Li wrote:
>>>
>>> +
>>>
>>>> From: Xingui Yang<yangxingui@huawei.com>
>>>>
>>>> After driver exposes all HW queues and application submits IO to multiple
>>>> queues in parallel, if NCQ and non-NCQ commands are mixed to sata disk,
>>>> ata_qc_defer() causes non-NCQ commands to be requeued and possibly
>>>> repeated
>>>> forever.
>>>
>>> I don't think that it is a good idea to mask out bugs with module
>>> parameters.
>>>
>>> Was this the same libata/libsas issue reported some time ago?
>>
>> Yeah，related to this issue: https://lore.kernel.org/linux-block/eef1e927-c9b2-c61d-7f48-92e65d8b0418@huawei.com/
>>
>> And, Niklas tried to help fix this problem:
>> https://lore.kernel.org/linux-scsi/ZynmfyDA9R-lrW71@ryzen/
>>
>> Considering that there is no formal solution yet. And our users rarely use
>> SATA disks and SAS disks together on a single machine. For this reason, they
>> can flexibly turn off the exposure of multiple queues in the scenario of
>> using only SATA disks. In addition, it is also convenient to conduct
>> performance comparison tests to expose multiple hardware queues and single
>> queues.
> 
> The solution I sent is not good since it relies on EH.
> 
> One would need to come up with a better solution to fix libsas drivers,
> possibly a workqueue.
> 
> I think Damien is planning to add a workqueue submit path to libata,
> if so, perhaps we could base a better solution on top of that.

Thank you for your solution. As you said, we may need a better solution.

Thanks,
Xingui
.

[PATCH 2/5] scsi: hisi_sas: Use macro instead of magic number

[Yihang Li]

The hisi_sas driver has a large number of magic numbers, which is
unfriendly to code reading, so macro definitions are used instead.

Signed-off-by: Yihang Li <liyihang9@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  42 +++--
 drivers/scsi/hisi_sas/hisi_sas_main.c  |  41 +++--
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 238 +++++++++++++++----------
 3 files changed, 206 insertions(+), 115 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index f93eefe68ccb..0f1bc6445aca 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -46,6 +46,13 @@
 #define HISI_SAS_IOST_ITCT_CACHE_DW_SZ 10
 #define HISI_SAS_FIFO_DATA_DW_SIZE 32
 
+#define HISI_SAS_REG_MEM_SIZE 4
+#define HISI_SAS_MAX_CDB_LEN 16
+#define HISI_SAS_BLK_QUEUE_DEPTH 64
+
+#define BYTE_TO_DW 4
+#define BYTE_TO_DDW 8
+
 #define HISI_SAS_STATUS_BUF_SZ (sizeof(struct hisi_sas_status_buffer))
 #define HISI_SAS_COMMAND_TABLE_SZ (sizeof(union hisi_sas_command_table))
 
@@ -92,6 +99,7 @@
 
 #define HISI_SAS_WAIT_PHYUP_TIMEOUT	(30 * HZ)
 #define HISI_SAS_CLEAR_ITCT_TIMEOUT	(20 * HZ)
+#define HISI_SAS_DELAY_FOR_PHY_DISABLE 100
 
 struct hisi_hba;
 
@@ -167,6 +175,8 @@ struct hisi_sas_debugfs_fifo {
 	u32 rd_data[HISI_SAS_FIFO_DATA_DW_SIZE];
 };
 
+#define FRAME_RCVD_BUF 32
+#define SAS_PHY_RESV_SIZE 2
 struct hisi_sas_phy {
 	struct work_struct	works[HISI_PHYES_NUM];
 	struct hisi_hba	*hisi_hba;
@@ -178,10 +188,10 @@ struct hisi_sas_phy {
 	spinlock_t lock;
 	u64		port_id; /* from hw */
 	u64		frame_rcvd_size;
-	u8		frame_rcvd[32];
+	u8		frame_rcvd[FRAME_RCVD_BUF];
 	u8		phy_attached;
 	u8		in_reset;
-	u8		reserved[2];
+	u8		reserved[SAS_PHY_RESV_SIZE];
 	u32		phy_type;
 	u32		code_violation_err_count;
 	enum sas_linkrate	minimum_linkrate;
@@ -349,6 +359,7 @@ struct hisi_sas_hw {
 };
 
 #define HISI_SAS_MAX_DEBUGFS_DUMP (50)
+#define HISI_SAS_DEFAULT_DEBUGFS_DUMP 1
 
 struct hisi_sas_debugfs_cq {
 	struct hisi_sas_cq *cq;
@@ -529,12 +540,13 @@ struct hisi_sas_cmd_hdr {
 	__le64 dif_prd_table_addr;
 };
 
+#define ITCT_RESV_DDW 12
 struct hisi_sas_itct {
 	__le64 qw0;
 	__le64 sas_addr;
 	__le64 qw2;
 	__le64 qw3;
-	__le64 qw4_15[12];
+	__le64 qw4_15[ITCT_RESV_DDW];
 };
 
 struct hisi_sas_iost {
@@ -544,22 +556,26 @@ struct hisi_sas_iost {
 	__le64 qw3;
 };
 
+#define ERROR_RECORD_BUF_DW 4
 struct hisi_sas_err_record {
-	u32	data[4];
+	u32	data[ERROR_RECORD_BUF_DW];
 };
 
+#define FIS_RESV_DW 3
 struct hisi_sas_initial_fis {
 	struct hisi_sas_err_record err_record;
 	struct dev_to_host_fis fis;
-	u32 rsvd[3];
+	u32 rsvd[FIS_RESV_DW];
 };
 
+#define BREAKPOINT_DATA_SIZE 128
 struct hisi_sas_breakpoint {
-	u8	data[128];
+	u8	data[BREAKPOINT_DATA_SIZE];
 };
 
+#define BREAKPOINT_TAG_NUM 32
 struct hisi_sas_sata_breakpoint {
-	struct hisi_sas_breakpoint tag[32];
+	struct hisi_sas_breakpoint tag[BREAKPOINT_TAG_NUM];
 };
 
 struct hisi_sas_sge {
@@ -570,13 +586,15 @@ struct hisi_sas_sge {
 	__le32 data_off;
 };
 
+#define SMP_CMD_TABLE_SIZE 44
 struct hisi_sas_command_table_smp {
-	u8 bytes[44];
+	u8 bytes[SMP_CMD_TABLE_SIZE];
 };
 
+#define DUMMY_BUF_SIZE 12
 struct hisi_sas_command_table_stp {
 	struct	host_to_dev_fis command_fis;
-	u8	dummy[12];
+	u8	dummy[DUMMY_BUF_SIZE];
 	u8	atapi_cdb[ATAPI_CDB_LEN];
 };
 
@@ -590,12 +608,13 @@ struct hisi_sas_sge_dif_page {
 	struct hisi_sas_sge sge[HISI_SAS_SGE_DIF_PAGE_CNT];
 }  __aligned(16);
 
+#define PROT_BUF_SIZE 7
 struct hisi_sas_command_table_ssp {
 	struct ssp_frame_hdr hdr;
 	union {
 		struct {
 			struct ssp_command_iu task;
-			u32 prot[7];
+			u32 prot[PROT_BUF_SIZE];
 		};
 		struct ssp_tmf_iu ssp_task;
 		struct xfer_rdy_iu xfer_rdy;
@@ -609,9 +628,10 @@ union hisi_sas_command_table {
 	struct hisi_sas_command_table_stp stp;
 }  __aligned(16);
 
+#define IU_BUF_SIZE 1024
 struct hisi_sas_status_buffer {
 	struct hisi_sas_err_record err;
-	u8	iu[1024];
+	u8	iu[IU_BUF_SIZE];
 }  __aligned(16);
 
 struct hisi_sas_slot_buf_table {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 3d2e8ec7f110..9f36037ed1cb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -7,6 +7,16 @@
 #include "hisi_sas.h"
 #define DRV_NAME "hisi_sas"
 
+#define LINK_RATE_BIT_MASK 2
+#define FIS_BUF_SIZE 20
+#define WAIT_CMD_COMPLETE_DELAY 100
+#define WAIT_CMD_COMPLETE_TMROUT 5000
+#define DELAY_FOR_LINK_READY 2000
+#define BLK_CNT_OPTIMIZE_MARK 64
+#define HZ_TO_MHZ 1000000
+#define DELAY_FOR_SOFTRESET_MAX 1000
+#define DELAY_FOR_SOFTRESET_MIN 900
+
 #define DEV_IS_GONE(dev) \
 	((!dev) || (dev->dev_type == SAS_PHY_UNUSED))
 
@@ -151,7 +161,7 @@ u8 hisi_sas_get_prog_phy_linkrate_mask(enum sas_linkrate max)
 
 	max -= SAS_LINK_RATE_1_5_GBPS;
 	for (i = 0; i <= max; i++)
-		rate |= 1 << (i * 2);
+		rate |= 1 << (i * LINK_RATE_BIT_MASK);
 	return rate;
 }
 EXPORT_SYMBOL_GPL(hisi_sas_get_prog_phy_linkrate_mask);
@@ -902,7 +912,7 @@ int hisi_sas_sdev_configure(struct scsi_device *sdev, struct queue_limits *lim)
 	if (ret)
 		return ret;
 	if (!dev_is_sata(dev))
-		sas_change_queue_depth(sdev, 64);
+		sas_change_queue_depth(sdev, HISI_SAS_BLK_QUEUE_DEPTH);
 
 	return 0;
 }
@@ -1264,7 +1274,7 @@ static int hisi_sas_phy_set_linkrate(struct hisi_hba *hisi_hba, int phy_no,
 	sas_phy->phy->minimum_linkrate = min;
 
 	hisi_sas_phy_enable(hisi_hba, phy_no, 0);
-	msleep(100);
+	msleep(HISI_SAS_DELAY_FOR_PHY_DISABLE);
 	hisi_hba->hw->phy_set_linkrate(hisi_hba, phy_no, &_r);
 	hisi_sas_phy_enable(hisi_hba, phy_no, 1);
 
@@ -1294,7 +1304,7 @@ static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
 
 	case PHY_FUNC_LINK_RESET:
 		hisi_sas_phy_enable(hisi_hba, phy_no, 0);
-		msleep(100);
+		msleep(HISI_SAS_DELAY_FOR_PHY_DISABLE);
 		hisi_sas_phy_enable(hisi_hba, phy_no, 1);
 		break;
 
@@ -1349,7 +1359,7 @@ static void hisi_sas_fill_ata_reset_cmd(struct ata_device *dev,
 
 static int hisi_sas_softreset_ata_disk(struct domain_device *device)
 {
-	u8 fis[20] = {0};
+	u8 fis[FIS_BUF_SIZE] = {0};
 	struct ata_port *ap = device->sata_dev.ap;
 	struct ata_link *link;
 	int rc = TMF_RESP_FUNC_FAILED;
@@ -1366,7 +1376,7 @@ static int hisi_sas_softreset_ata_disk(struct domain_device *device)
 	}
 
 	if (rc == TMF_RESP_FUNC_COMPLETE) {
-		usleep_range(900, 1000);
+		usleep_range(DELAY_FOR_SOFTRESET_MIN, DELAY_FOR_SOFTRESET_MAX);
 		ata_for_each_link(link, ap, EDGE) {
 			int pmp = sata_srst_pmp(link);
 
@@ -1496,7 +1506,7 @@ static void hisi_sas_send_ata_reset_each_phy(struct hisi_hba *hisi_hba,
 	struct device *dev = hisi_hba->dev;
 	int rc = TMF_RESP_FUNC_FAILED;
 	struct ata_link *link;
-	u8 fis[20] = {0};
+	u8 fis[FIS_BUF_SIZE] = {0};
 	int i;
 
 	for (i = 0; i < hisi_hba->n_phy; i++) {
@@ -1563,7 +1573,9 @@ void hisi_sas_controller_reset_prepare(struct hisi_hba *hisi_hba)
 	hisi_hba->phy_state = hisi_hba->hw->get_phys_state(hisi_hba);
 
 	scsi_block_requests(shost);
-	hisi_hba->hw->wait_cmds_complete_timeout(hisi_hba, 100, 5000);
+	hisi_hba->hw->wait_cmds_complete_timeout(hisi_hba,
+						 WAIT_CMD_COMPLETE_DELAY,
+						 WAIT_CMD_COMPLETE_TMROUT);
 
 	/*
 	 * hisi_hba->timer is only used for v1/v2 hw, and check hw->sht
@@ -1864,7 +1876,7 @@ static int hisi_sas_debug_I_T_nexus_reset(struct domain_device *device)
 		rc = ata_wait_after_reset(link, jiffies + HISI_SAS_WAIT_PHYUP_TIMEOUT,
 					  smp_ata_check_ready_type);
 	} else {
-		msleep(2000);
+		msleep(DELAY_FOR_LINK_READY);
 	}
 
 	return rc;
@@ -2298,12 +2310,14 @@ int hisi_sas_alloc(struct hisi_hba *hisi_hba)
 		goto err_out;
 
 	/* roundup to avoid overly large block size */
-	max_command_entries_ru = roundup(max_command_entries, 64);
+	max_command_entries_ru = roundup(max_command_entries,
+					 BLK_CNT_OPTIMIZE_MARK);
 	if (hisi_hba->prot_mask & HISI_SAS_DIX_PROT_MASK)
 		sz_slot_buf_ru = sizeof(struct hisi_sas_slot_dif_buf_table);
 	else
 		sz_slot_buf_ru = sizeof(struct hisi_sas_slot_buf_table);
-	sz_slot_buf_ru = roundup(sz_slot_buf_ru, 64);
+
+	sz_slot_buf_ru = roundup(sz_slot_buf_ru, BLK_CNT_OPTIMIZE_MARK);
 	s = max(lcm(max_command_entries_ru, sz_slot_buf_ru), PAGE_SIZE);
 	blk_cnt = (max_command_entries_ru * sz_slot_buf_ru) / s;
 	slots_per_blk = s / sz_slot_buf_ru;
@@ -2468,7 +2482,8 @@ int hisi_sas_get_fw_info(struct hisi_hba *hisi_hba)
 	if (IS_ERR(refclk))
 		dev_dbg(dev, "no ref clk property\n");
 	else
-		hisi_hba->refclk_frequency_mhz = clk_get_rate(refclk) / 1000000;
+		hisi_hba->refclk_frequency_mhz = clk_get_rate(refclk) /
+						 HZ_TO_MHZ;
 
 	if (device_property_read_u32(dev, "phy-count", &hisi_hba->n_phy)) {
 		dev_err(dev, "could not get property phy-count\n");
@@ -2590,7 +2605,7 @@ int hisi_sas_probe(struct platform_device *pdev,
 	shost->max_id = HISI_SAS_MAX_DEVICES;
 	shost->max_lun = ~0;
 	shost->max_channel = 1;
-	shost->max_cmd_len = 16;
+	shost->max_cmd_len = HISI_SAS_MAX_CDB_LEN;
 	if (hisi_hba->hw->slot_index_alloc) {
 		shost->can_queue = HISI_SAS_MAX_COMMANDS;
 		shost->cmd_per_lun = HISI_SAS_MAX_COMMANDS;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index a1f0a59a8c8d..e739b09aea9a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -536,6 +536,43 @@ struct hisi_sas_err_record_v3 {
 
 #define BASE_VECTORS_V3_HW  16
 #define MIN_AFFINE_VECTORS_V3_HW  (BASE_VECTORS_V3_HW + 1)
+#define IRQ_PHY_UP_DOWN_INDEX 1
+#define IRQ_CHL_INDEX 2
+#define IRQ_AXI_INDEX 11
+
+#define DELAY_FOR_RESET_HW 100
+#define HDR_SG_MOD 0x2
+#define LUN_SIZE 8
+#define ATTR_PRIO_REGION 9
+#define CDB_REGION 12
+#define PRIO_OFF 3
+#define TMF_REGION 10
+#define TAG_MSB 12
+#define TAG_LSB 13
+#define SMP_FRAME_TYPE 2
+#define SMP_CRC_SIZE 4
+#define HDR_TAG_OFF 3
+#define HOST_NO_OFF 6
+#define PHY_NO_OFF 7
+#define IDENTIFY_REG_READ 6
+#define LINK_RESET_TIMEOUT_OFF 4
+#define DECIMALISM_FLAG 10
+#define WAIT_RETRY 100
+#define WAIT_TMROUT 5000
+
+#define ID_DWORD0_INDEX 0
+#define ID_DWORD1_INDEX 1
+#define ID_DWORD2_INDEX 2
+#define ID_DWORD3_INDEX 3
+#define ID_DWORD4_INDEX 4
+#define ID_DWORD5_INDEX 5
+#define TICKS_BIT_INDEX 24
+#define COUNT_BIT_INDEX 8
+
+#define PORT_REG_LENGTH	    0x100
+#define GLOBAL_REG_LENGTH   0x800
+#define	AXI_REG_LENGTH	    0x61
+#define RAS_REG_LENGTH	    0x10
 
 #define CHNL_INT_STS_MSK	0xeeeeeeee
 #define CHNL_INT_STS_PHY_MSK	0xe
@@ -816,17 +853,17 @@ static void config_id_frame_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
 	identify_buffer = (u32 *)(&identify_frame);
 
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
-			__swab32(identify_buffer[0]));
+			__swab32(identify_buffer[ID_DWORD0_INDEX]));
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
-			__swab32(identify_buffer[1]));
+			__swab32(identify_buffer[ID_DWORD1_INDEX]));
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
-			__swab32(identify_buffer[2]));
+			__swab32(identify_buffer[ID_DWORD2_INDEX]));
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
-			__swab32(identify_buffer[3]));
+			__swab32(identify_buffer[ID_DWORD3_INDEX]));
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
-			__swab32(identify_buffer[4]));
+			__swab32(identify_buffer[ID_DWORD4_INDEX]));
 	hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
-			__swab32(identify_buffer[5]));
+			__swab32(identify_buffer[ID_DWORD5_INDEX]));
 }
 
 static void setup_itct_v3_hw(struct hisi_hba *hisi_hba,
@@ -946,7 +983,7 @@ static int reset_hw_v3_hw(struct hisi_hba *hisi_hba)
 
 	/* Disable all of the PHYs */
 	hisi_sas_stop_phys(hisi_hba);
-	udelay(50);
+	udelay(HISI_SAS_DELAY_FOR_PHY_DISABLE);
 
 	/* Ensure axi bus idle */
 	ret = hisi_sas_read32_poll_timeout(AXI_CFG, val, !val,
@@ -986,7 +1023,7 @@ static int hw_init_v3_hw(struct hisi_hba *hisi_hba)
 		return rc;
 	}
 
-	msleep(100);
+	msleep(DELAY_FOR_RESET_HW);
 	init_reg_v3_hw(hisi_hba);
 
 	if (guid_parse("D5918B4B-37AE-4E10-A99F-E5E8A6EF4C1F", &guid)) {
@@ -1035,7 +1072,7 @@ static void disable_phy_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
 	cfg &= ~PHY_CFG_ENA_MSK;
 	hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
 
-	mdelay(50);
+	mdelay(HISI_SAS_DELAY_FOR_PHY_DISABLE);
 
 	state = hisi_sas_read32(hisi_hba, PHY_STATE);
 	if (state & BIT(phy_no)) {
@@ -1071,7 +1108,7 @@ static void phy_hard_reset_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
 		hisi_sas_phy_write32(hisi_hba, phy_no, TXID_AUTO,
 					txid_auto | TX_HARDRST_MSK);
 	}
-	msleep(100);
+	msleep(HISI_SAS_DELAY_FOR_PHY_DISABLE);
 	hisi_sas_phy_enable(hisi_hba, phy_no, 1);
 }
 
@@ -1116,7 +1153,8 @@ static int get_wideport_bitmap_v3_hw(struct hisi_hba *hisi_hba, int port_id)
 
 	for (i = 0; i < hisi_hba->n_phy; i++)
 		if (phy_state & BIT(i))
-			if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
+			if (((phy_port_num_ma >> (i * HISI_SAS_REG_MEM_SIZE)) & 0xf) ==
+			    port_id)
 				bitmap |= BIT(i);
 
 	return bitmap;
@@ -1314,9 +1352,9 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
 
 	dw2 = (((sizeof(struct ssp_command_iu) + sizeof(struct ssp_frame_hdr)
-	      + 3) / 4) << CMD_HDR_CFL_OFF) |
-	      ((HISI_SAS_MAX_SSP_RESP_SZ / 4) << CMD_HDR_MRFL_OFF) |
-	      (2 << CMD_HDR_SG_MOD_OFF);
+	      + 3) / BYTE_TO_DW) << CMD_HDR_CFL_OFF) |
+	      ((HISI_SAS_MAX_SSP_RESP_SZ / BYTE_TO_DW) << CMD_HDR_MRFL_OFF) |
+	      (HDR_SG_MOD << CMD_HDR_SG_MOD_OFF);
 	hdr->dw2 = cpu_to_le32(dw2);
 	hdr->transfer_tags = cpu_to_le32(slot->idx);
 
@@ -1336,18 +1374,19 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	buf_cmd = hisi_sas_cmd_hdr_addr_mem(slot) +
 		sizeof(struct ssp_frame_hdr);
 
-	memcpy(buf_cmd, &task->ssp_task.LUN, 8);
+	memcpy(buf_cmd, &task->ssp_task.LUN, LUN_SIZE);
 	if (!tmf) {
-		buf_cmd[9] = ssp_task->task_attr;
-		memcpy(buf_cmd + 12, scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
+		buf_cmd[ATTR_PRIO_REGION] = ssp_task->task_attr;
+		memcpy(buf_cmd + CDB_REGION, scsi_cmnd->cmnd,
+		       scsi_cmnd->cmd_len);
 	} else {
-		buf_cmd[10] = tmf->tmf;
+		buf_cmd[TMF_REGION] = tmf->tmf;
 		switch (tmf->tmf) {
 		case TMF_ABORT_TASK:
 		case TMF_QUERY_TASK:
-			buf_cmd[12] =
+			buf_cmd[TAG_MSB] =
 				(tmf->tag_of_task_to_be_managed >> 8) & 0xff;
-			buf_cmd[13] =
+			buf_cmd[TAG_LSB] =
 				tmf->tag_of_task_to_be_managed & 0xff;
 			break;
 		default:
@@ -1380,7 +1419,8 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 			unsigned int interval = scsi_prot_interval(scsi_cmnd);
 			unsigned int ilog2_interval = ilog2(interval);
 
-			len = (task->total_xfer_len >> ilog2_interval) * 8;
+			len = (task->total_xfer_len >> ilog2_interval) *
+			      BYTE_TO_DDW;
 		}
 	}
 
@@ -1400,6 +1440,7 @@ static void prep_smp_v3_hw(struct hisi_hba *hisi_hba,
 	struct hisi_sas_device *sas_dev = device->lldd_dev;
 	dma_addr_t req_dma_addr;
 	unsigned int req_len;
+	u32 cfl;
 
 	/* req */
 	sg_req = &task->smp_task.smp_req;
@@ -1410,7 +1451,7 @@ static void prep_smp_v3_hw(struct hisi_hba *hisi_hba,
 	/* dw0 */
 	hdr->dw0 = cpu_to_le32((port->id << CMD_HDR_PORT_OFF) |
 			       (1 << CMD_HDR_PRIORITY_OFF) | /* high pri */
-			       (2 << CMD_HDR_CMD_OFF)); /* smp */
+			       (SMP_FRAME_TYPE << CMD_HDR_CMD_OFF)); /* smp */
 
 	/* map itct entry */
 	hdr->dw1 = cpu_to_le32((sas_dev->device_id << CMD_HDR_DEV_ID_OFF) |
@@ -1418,8 +1459,9 @@ static void prep_smp_v3_hw(struct hisi_hba *hisi_hba,
 			       (DIR_NO_DATA << CMD_HDR_DIR_OFF));
 
 	/* dw2 */
-	hdr->dw2 = cpu_to_le32((((req_len - 4) / 4) << CMD_HDR_CFL_OFF) |
-			       (HISI_SAS_MAX_SMP_RESP_SZ / 4 <<
+	cfl = (req_len - SMP_CRC_SIZE) / BYTE_TO_DW;
+	hdr->dw2 = cpu_to_le32((cfl << CMD_HDR_CFL_OFF) |
+			       (HISI_SAS_MAX_SMP_RESP_SZ / BYTE_TO_DW <<
 			       CMD_HDR_MRFL_OFF));
 
 	hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
@@ -1484,12 +1526,13 @@ static void prep_ata_v3_hw(struct hisi_hba *hisi_hba,
 		struct ata_queued_cmd *qc = task->uldd_task;
 
 		hdr_tag = qc->tag;
-		task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+		task->ata_task.fis.sector_count |=
+				(u8)(hdr_tag << HDR_TAG_OFF);
 		dw2 |= hdr_tag << CMD_HDR_NCQ_TAG_OFF;
 	}
 
-	dw2 |= (HISI_SAS_MAX_STP_RESP_SZ / 4) << CMD_HDR_CFL_OFF |
-			2 << CMD_HDR_SG_MOD_OFF;
+	dw2 |= (HISI_SAS_MAX_STP_RESP_SZ / BYTE_TO_DW) << CMD_HDR_CFL_OFF |
+		HDR_SG_MOD << CMD_HDR_SG_MOD_OFF;
 	hdr->dw2 = cpu_to_le32(dw2);
 
 	/* dw3 */
@@ -1549,9 +1592,9 @@ static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
 	hisi_sas_phy_write32(hisi_hba, phy_no, PHYCTRL_PHY_ENA_MSK, 1);
 
 	port_id = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
-	port_id = (port_id >> (4 * phy_no)) & 0xf;
+	port_id = (port_id >> (HISI_SAS_REG_MEM_SIZE * phy_no)) & 0xf;
 	link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
-	link_rate = (link_rate >> (phy_no * 4)) & 0xf;
+	link_rate = (link_rate >> (phy_no * HISI_SAS_REG_MEM_SIZE)) & 0xf;
 
 	if (port_id == 0xf) {
 		dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
@@ -1584,8 +1627,8 @@ static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
 
 		sas_phy->oob_mode = SATA_OOB_MODE;
 		attached_sas_addr[0] = 0x50;
-		attached_sas_addr[6] = shost->host_no;
-		attached_sas_addr[7] = phy_no;
+		attached_sas_addr[HOST_NO_OFF] = shost->host_no;
+		attached_sas_addr[PHY_NO_OFF] = phy_no;
 		memcpy(sas_phy->attached_sas_addr,
 		       attached_sas_addr,
 		       SAS_ADDR_SIZE);
@@ -1601,7 +1644,7 @@ static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
 			(struct sas_identify_frame *)frame_rcvd;
 
 		dev_info(dev, "phyup: phy%d link_rate=%d\n", phy_no, link_rate);
-		for (i = 0; i < 6; i++) {
+		for (i = 0; i < IDENTIFY_REG_READ; i++) {
 			u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
 					       RX_IDAF_DWORD0 + (i * 4));
 			frame_rcvd[i] = __swab32(idaf);
@@ -1871,7 +1914,7 @@ static void handle_chl_int2_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
 
 		dev_warn(dev, "phy%d stp link timeout (0x%x)\n",
 			 phy_no, reg_value);
-		if (reg_value & BIT(4))
+		if (reg_value & BIT(LINK_RESET_TIMEOUT_OFF))
 			hisi_sas_notify_phy_event(phy, HISI_PHYE_LINK_RESET);
 	}
 
@@ -2600,7 +2643,7 @@ static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
 	struct pci_dev *pdev = hisi_hba->pci_dev;
 	int rc, i;
 
-	rc = devm_request_irq(dev, pci_irq_vector(pdev, 1),
+	rc = devm_request_irq(dev, pci_irq_vector(pdev, IRQ_PHY_UP_DOWN_INDEX),
 			      int_phy_up_down_bcast_v3_hw, 0,
 			      DRV_NAME " phy", hisi_hba);
 	if (rc) {
@@ -2608,7 +2651,7 @@ static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
 		return -ENOENT;
 	}
 
-	rc = devm_request_irq(dev, pci_irq_vector(pdev, 2),
+	rc = devm_request_irq(dev, pci_irq_vector(pdev, IRQ_CHL_INDEX),
 			      int_chnl_int_v3_hw, 0,
 			      DRV_NAME " channel", hisi_hba);
 	if (rc) {
@@ -2616,7 +2659,7 @@ static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
 		return -ENOENT;
 	}
 
-	rc = devm_request_irq(dev, pci_irq_vector(pdev, 11),
+	rc = devm_request_irq(dev, pci_irq_vector(pdev, IRQ_AXI_INDEX),
 			      fatal_axi_int_v3_hw, 0,
 			      DRV_NAME " fatal", hisi_hba);
 	if (rc) {
@@ -2629,7 +2672,8 @@ static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
 
 	for (i = 0; i < hisi_hba->cq_nvecs; i++) {
 		struct hisi_sas_cq *cq = &hisi_hba->cq[i];
-		int nr = hisi_sas_intr_conv ? 16 : 16 + i;
+		int nr = hisi_sas_intr_conv ? BASE_VECTORS_V3_HW :
+					      BASE_VECTORS_V3_HW + i;
 		unsigned long irqflags = hisi_sas_intr_conv ? IRQF_SHARED :
 							      IRQF_ONESHOT;
 		int cpu;
@@ -2691,14 +2735,14 @@ static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
 	struct pci_dev *pdev = hisi_hba->pci_dev;
 	int i;
 
-	synchronize_irq(pci_irq_vector(pdev, 1));
-	synchronize_irq(pci_irq_vector(pdev, 2));
-	synchronize_irq(pci_irq_vector(pdev, 11));
+	synchronize_irq(pci_irq_vector(pdev, IRQ_PHY_UP_DOWN_INDEX));
+	synchronize_irq(pci_irq_vector(pdev, IRQ_CHL_INDEX));
+	synchronize_irq(pci_irq_vector(pdev, IRQ_AXI_INDEX));
 	for (i = 0; i < hisi_hba->queue_count; i++)
 		hisi_sas_write32(hisi_hba, OQ0_INT_SRC_MSK + 0x4 * i, 0x1);
 
 	for (i = 0; i < hisi_hba->cq_nvecs; i++)
-		synchronize_irq(pci_irq_vector(pdev, i + 16));
+		synchronize_irq(pci_irq_vector(pdev, i + BASE_VECTORS_V3_HW));
 
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0xffffffff);
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0xffffffff);
@@ -2730,7 +2774,7 @@ static int disable_host_v3_hw(struct hisi_hba *hisi_hba)
 
 	hisi_sas_stop_phys(hisi_hba);
 
-	mdelay(10);
+	mdelay(HISI_SAS_DELAY_FOR_PHY_DISABLE);
 
 	reg_val = hisi_sas_read32(hisi_hba, AXI_MASTER_CFG_BASE +
 				  AM_CTRL_GLOBAL);
@@ -2867,13 +2911,13 @@ static ssize_t intr_coal_ticks_v3_hw_store(struct device *dev,
 	u32 intr_coal_ticks;
 	int ret;
 
-	ret = kstrtou32(buf, 10, &intr_coal_ticks);
+	ret = kstrtou32(buf, DECIMALISM_FLAG, &intr_coal_ticks);
 	if (ret) {
 		dev_err(dev, "Input data of interrupt coalesce unmatch\n");
 		return -EINVAL;
 	}
 
-	if (intr_coal_ticks >= BIT(24)) {
+	if (intr_coal_ticks >= BIT(TICKS_BIT_INDEX)) {
 		dev_err(dev, "intr_coal_ticks must be less than 2^24!\n");
 		return -EINVAL;
 	}
@@ -2906,13 +2950,13 @@ static ssize_t intr_coal_count_v3_hw_store(struct device *dev,
 	u32 intr_coal_count;
 	int ret;
 
-	ret = kstrtou32(buf, 10, &intr_coal_count);
+	ret = kstrtou32(buf, DECIMALISM_FLAG, &intr_coal_count);
 	if (ret) {
 		dev_err(dev, "Input data of interrupt coalesce unmatch\n");
 		return -EINVAL;
 	}
 
-	if (intr_coal_count >= BIT(8)) {
+	if (intr_coal_count >= BIT(COUNT_BIT_INDEX)) {
 		dev_err(dev, "intr_coal_count must be less than 2^8!\n");
 		return -EINVAL;
 	}
@@ -3044,7 +3088,7 @@ static const struct hisi_sas_debugfs_reg_lu debugfs_port_reg_lu[] = {
 
 static const struct hisi_sas_debugfs_reg debugfs_port_reg = {
 	.lu = debugfs_port_reg_lu,
-	.count = 0x100,
+	.count = PORT_REG_LENGTH,
 	.base_off = PORT_BASE,
 };
 
@@ -3118,7 +3162,7 @@ static const struct hisi_sas_debugfs_reg_lu debugfs_global_reg_lu[] = {
 
 static const struct hisi_sas_debugfs_reg debugfs_global_reg = {
 	.lu = debugfs_global_reg_lu,
-	.count = 0x800,
+	.count = GLOBAL_REG_LENGTH,
 };
 
 static const struct hisi_sas_debugfs_reg_lu debugfs_axi_reg_lu[] = {
@@ -3131,7 +3175,7 @@ static const struct hisi_sas_debugfs_reg_lu debugfs_axi_reg_lu[] = {
 
 static const struct hisi_sas_debugfs_reg debugfs_axi_reg = {
 	.lu = debugfs_axi_reg_lu,
-	.count = 0x61,
+	.count = AXI_REG_LENGTH,
 	.base_off = AXI_MASTER_CFG_BASE,
 };
 
@@ -3148,7 +3192,7 @@ static const struct hisi_sas_debugfs_reg_lu debugfs_ras_reg_lu[] = {
 
 static const struct hisi_sas_debugfs_reg debugfs_ras_reg = {
 	.lu = debugfs_ras_reg_lu,
-	.count = 0x10,
+	.count = RAS_REG_LENGTH,
 	.base_off = RAS_BASE,
 };
 
@@ -3157,7 +3201,7 @@ static void debugfs_snapshot_prepare_v3_hw(struct hisi_hba *hisi_hba)
 	struct Scsi_Host *shost = hisi_hba->shost;
 
 	scsi_block_requests(shost);
-	wait_cmds_complete_timeout_v3_hw(hisi_hba, 100, 5000);
+	wait_cmds_complete_timeout_v3_hw(hisi_hba, WAIT_RETRY, WAIT_TMROUT);
 
 	set_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
 	hisi_sas_sync_cqs(hisi_hba);
@@ -3198,7 +3242,7 @@ static void read_iost_itct_cache_v3_hw(struct hisi_hba *hisi_hba,
 		return;
 	}
 
-	memset(buf, 0, cache_dw_size * 4);
+	memset(buf, 0, cache_dw_size * BYTE_TO_DW);
 	buf[0] = val;
 
 	for (i = 1; i < cache_dw_size; i++)
@@ -3245,7 +3289,7 @@ static void hisi_sas_bist_test_restore_v3_hw(struct hisi_hba *hisi_hba)
 	reg_val = hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
 	/* init OOB link rate as 1.5 Gbits */
 	reg_val &= ~CFG_PROG_OOB_PHY_LINK_RATE_MSK;
-	reg_val |= (0x8 << CFG_PROG_OOB_PHY_LINK_RATE_OFF);
+	reg_val |= (SAS_LINK_RATE_1_5_GBPS << CFG_PROG_OOB_PHY_LINK_RATE_OFF);
 	hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE, reg_val);
 
 	/* enable PHY */
@@ -3254,6 +3298,9 @@ static void hisi_sas_bist_test_restore_v3_hw(struct hisi_hba *hisi_hba)
 
 #define SAS_PHY_BIST_CODE_INIT	0x1
 #define SAS_PHY_BIST_CODE1_INIT	0X80
+#define SAS_PHY_BIST_INIT_DELAY 100
+#define SAS_PHY_BIST_LOOP_TEST_0 1
+#define SAS_PHY_BIST_LOOP_TEST_1 2
 static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable)
 {
 	u32 reg_val, mode_tmp;
@@ -3272,7 +3319,8 @@ static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable)
 		 ffe[FFE_SATA_1_5_GBPS], ffe[FFE_SATA_3_0_GBPS],
 		 ffe[FFE_SATA_6_0_GBPS], fix_code[FIXED_CODE],
 		 fix_code[FIXED_CODE_1]);
-	mode_tmp = path_mode ? 2 : 1;
+	mode_tmp = path_mode ? SAS_PHY_BIST_LOOP_TEST_1 :
+			       SAS_PHY_BIST_LOOP_TEST_0;
 	if (enable) {
 		/* some preparations before bist test */
 		hisi_sas_bist_test_prep_v3_hw(hisi_hba);
@@ -3315,13 +3363,13 @@ static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable)
 					     SAS_PHY_BIST_CODE1_INIT);
 		}
 
-		mdelay(100);
+		mdelay(SAS_PHY_BIST_INIT_DELAY);
 		reg_val |= (CFG_RX_BIST_EN_MSK | CFG_TX_BIST_EN_MSK);
 		hisi_sas_phy_write32(hisi_hba, phy_no, SAS_PHY_BIST_CTRL,
 				     reg_val);
 
 		/* clear error bit */
-		mdelay(100);
+		mdelay(SAS_PHY_BIST_INIT_DELAY);
 		hisi_sas_phy_read32(hisi_hba, phy_no, SAS_BIST_ERR_CNT);
 	} else {
 		/* disable bist test and recover it */
@@ -3522,7 +3570,7 @@ static void debugfs_snapshot_port_reg_v3_hw(struct hisi_hba *hisi_hba)
 	for (phy_cnt = 0; phy_cnt < hisi_hba->n_phy; phy_cnt++) {
 		databuf = hisi_hba->debugfs_port_reg[dump_index][phy_cnt].data;
 		for (i = 0; i < port->count; i++, databuf++) {
-			offset = port->base_off + 4 * i;
+			offset = port->base_off + HISI_SAS_REG_MEM_SIZE * i;
 			*databuf = hisi_sas_phy_read32(hisi_hba, phy_cnt,
 						       offset);
 		}
@@ -3536,7 +3584,8 @@ static void debugfs_snapshot_global_reg_v3_hw(struct hisi_hba *hisi_hba)
 	int i;
 
 	for (i = 0; i < debugfs_global_reg.count; i++, databuf++)
-		*databuf = hisi_sas_read32(hisi_hba, 4 * i);
+		*databuf = hisi_sas_read32(hisi_hba,
+					   HISI_SAS_REG_MEM_SIZE * i);
 }
 
 static void debugfs_snapshot_axi_reg_v3_hw(struct hisi_hba *hisi_hba)
@@ -3547,7 +3596,9 @@ static void debugfs_snapshot_axi_reg_v3_hw(struct hisi_hba *hisi_hba)
 	int i;
 
 	for (i = 0; i < axi->count; i++, databuf++)
-		*databuf = hisi_sas_read32(hisi_hba, 4 * i + axi->base_off);
+		*databuf = hisi_sas_read32(hisi_hba,
+					   HISI_SAS_REG_MEM_SIZE * i +
+					   axi->base_off);
 }
 
 static void debugfs_snapshot_ras_reg_v3_hw(struct hisi_hba *hisi_hba)
@@ -3558,7 +3609,9 @@ static void debugfs_snapshot_ras_reg_v3_hw(struct hisi_hba *hisi_hba)
 	int i;
 
 	for (i = 0; i < ras->count; i++, databuf++)
-		*databuf = hisi_sas_read32(hisi_hba, 4 * i + ras->base_off);
+		*databuf = hisi_sas_read32(hisi_hba,
+					   HISI_SAS_REG_MEM_SIZE * i +
+					   ras->base_off);
 }
 
 static void debugfs_snapshot_itct_reg_v3_hw(struct hisi_hba *hisi_hba)
@@ -3621,7 +3674,7 @@ static void debugfs_print_reg_v3_hw(u32 *regs_val, struct seq_file *s,
 	int i;
 
 	for (i = 0; i < reg->count; i++) {
-		int off = i * 4;
+		int off = i * HISI_SAS_REG_MEM_SIZE;
 		const char *name;
 
 		name = debugfs_to_reg_name_v3_hw(off, reg->base_off,
@@ -3699,9 +3752,9 @@ static void debugfs_show_row_64_v3_hw(struct seq_file *s, int index,
 
 	/* completion header size not fixed per HW version */
 	seq_printf(s, "index %04d:\n\t", index);
-	for (i = 1; i <= sz / 8; i++, ptr++) {
+	for (i = 1; i <= sz / BYTE_TO_DDW; i++, ptr++) {
 		seq_printf(s, " 0x%016llx", le64_to_cpu(*ptr));
-		if (!(i % 2))
+		if (!(i % TWO_PARA_PER_LINE))
 			seq_puts(s, "\n\t");
 	}
 
@@ -3715,9 +3768,9 @@ static void debugfs_show_row_32_v3_hw(struct seq_file *s, int index,
 
 	/* completion header size not fixed per HW version */
 	seq_printf(s, "index %04d:\n\t", index);
-	for (i = 1; i <= sz / 4; i++, ptr++) {
+	for (i = 1; i <= sz / BYTE_TO_DW; i++, ptr++) {
 		seq_printf(s, " 0x%08x", le32_to_cpu(*ptr));
-		if (!(i % 4))
+		if (!(i % FOUR_PARA_PER_LINE))
 			seq_puts(s, "\n\t");
 	}
 	seq_puts(s, "\n");
@@ -3802,7 +3855,7 @@ static int debugfs_iost_cache_v3_hw_show(struct seq_file *s, void *p)
 	struct hisi_sas_debugfs_iost_cache *debugfs_iost_cache = s->private;
 	struct hisi_sas_iost_itct_cache *iost_cache =
 						debugfs_iost_cache->cache;
-	u32 cache_size = HISI_SAS_IOST_ITCT_CACHE_DW_SZ * 4;
+	u32 cache_size = HISI_SAS_IOST_ITCT_CACHE_DW_SZ * BYTE_TO_DW;
 	int i, tab_idx;
 	__le64 *iost;
 
@@ -3850,7 +3903,7 @@ static int debugfs_itct_cache_v3_hw_show(struct seq_file *s, void *p)
 	struct hisi_sas_debugfs_itct_cache *debugfs_itct_cache = s->private;
 	struct hisi_sas_iost_itct_cache *itct_cache =
 						debugfs_itct_cache->cache;
-	u32 cache_size = HISI_SAS_IOST_ITCT_CACHE_DW_SZ * 4;
+	u32 cache_size = HISI_SAS_IOST_ITCT_CACHE_DW_SZ * BYTE_TO_DW;
 	int i, tab_idx;
 	__le64 *itct;
 
@@ -3879,12 +3932,12 @@ static void debugfs_create_files_v3_hw(struct hisi_hba *hisi_hba, int index)
 	u64 *debugfs_timestamp;
 	struct dentry *dump_dentry;
 	struct dentry *dentry;
-	char name[256];
+	char name[NAME_BUF_SIZE];
 	int p;
 	int c;
 	int d;
 
-	snprintf(name, 256, "%d", index);
+	snprintf(name, NAME_BUF_SIZE, "%d", index);
 
 	dump_dentry = debugfs_create_dir(name, hisi_hba->debugfs_dump_dentry);
 
@@ -3900,7 +3953,7 @@ static void debugfs_create_files_v3_hw(struct hisi_hba *hisi_hba, int index)
 	/* Create port dir and files */
 	dentry = debugfs_create_dir("port", dump_dentry);
 	for (p = 0; p < hisi_hba->n_phy; p++) {
-		snprintf(name, 256, "%d", p);
+		snprintf(name, NAME_BUF_SIZE, "%d", p);
 
 		debugfs_create_file(name, 0400, dentry,
 				    &hisi_hba->debugfs_port_reg[index][p],
@@ -3910,7 +3963,7 @@ static void debugfs_create_files_v3_hw(struct hisi_hba *hisi_hba, int index)
 	/* Create CQ dir and files */
 	dentry = debugfs_create_dir("cq", dump_dentry);
 	for (c = 0; c < hisi_hba->queue_count; c++) {
-		snprintf(name, 256, "%d", c);
+		snprintf(name, NAME_BUF_SIZE, "%d", c);
 
 		debugfs_create_file(name, 0400, dentry,
 				    &hisi_hba->debugfs_cq[index][c],
@@ -3920,7 +3973,7 @@ static void debugfs_create_files_v3_hw(struct hisi_hba *hisi_hba, int index)
 	/* Create DQ dir and files */
 	dentry = debugfs_create_dir("dq", dump_dentry);
 	for (d = 0; d < hisi_hba->queue_count; d++) {
-		snprintf(name, 256, "%d", d);
+		snprintf(name, NAME_BUF_SIZE, "%d", d);
 
 		debugfs_create_file(name, 0400, dentry,
 				    &hisi_hba->debugfs_dq[index][d],
@@ -3957,9 +4010,9 @@ static ssize_t debugfs_trigger_dump_v3_hw_write(struct file *file,
 						size_t count, loff_t *ppos)
 {
 	struct hisi_hba *hisi_hba = file->f_inode->i_private;
-	char buf[8];
+	char buf[DUMP_BUF_SIZE];
 
-	if (count > 8)
+	if (count > DUMP_BUF_SIZE)
 		return -EFAULT;
 
 	if (copy_from_user(buf, user_buf, count))
@@ -4023,7 +4076,7 @@ static ssize_t debugfs_bist_linkrate_v3_hw_write(struct file *filp,
 {
 	struct seq_file *m = filp->private_data;
 	struct hisi_hba *hisi_hba = m->private;
-	char kbuf[16] = {}, *pkbuf;
+	char kbuf[BIST_BUF_SIZE] = {}, *pkbuf;
 	bool found = false;
 	int i;
 
@@ -4040,7 +4093,7 @@ static ssize_t debugfs_bist_linkrate_v3_hw_write(struct file *filp,
 
 	for (i = 0; i < ARRAY_SIZE(debugfs_loop_linkrate_v3_hw); i++) {
 		if (!strncmp(debugfs_loop_linkrate_v3_hw[i].name,
-			     pkbuf, 16)) {
+			     pkbuf, BIST_BUF_SIZE)) {
 			hisi_hba->debugfs_bist_linkrate =
 				debugfs_loop_linkrate_v3_hw[i].value;
 			found = true;
@@ -4098,7 +4151,7 @@ static ssize_t debugfs_bist_code_mode_v3_hw_write(struct file *filp,
 {
 	struct seq_file *m = filp->private_data;
 	struct hisi_hba *hisi_hba = m->private;
-	char kbuf[16] = {}, *pkbuf;
+	char kbuf[BIST_BUF_SIZE] = {}, *pkbuf;
 	bool found = false;
 	int i;
 
@@ -4115,7 +4168,7 @@ static ssize_t debugfs_bist_code_mode_v3_hw_write(struct file *filp,
 
 	for (i = 0; i < ARRAY_SIZE(debugfs_loop_code_mode_v3_hw); i++) {
 		if (!strncmp(debugfs_loop_code_mode_v3_hw[i].name,
-			     pkbuf, 16)) {
+			     pkbuf, BIST_BUF_SIZE)) {
 			hisi_hba->debugfs_bist_code_mode =
 				debugfs_loop_code_mode_v3_hw[i].value;
 			found = true;
@@ -4230,7 +4283,7 @@ static ssize_t debugfs_bist_mode_v3_hw_write(struct file *filp,
 {
 	struct seq_file *m = filp->private_data;
 	struct hisi_hba *hisi_hba = m->private;
-	char kbuf[16] = {}, *pkbuf;
+	char kbuf[BIST_BUF_SIZE] = {}, *pkbuf;
 	bool found = false;
 	int i;
 
@@ -4246,7 +4299,8 @@ static ssize_t debugfs_bist_mode_v3_hw_write(struct file *filp,
 	pkbuf = strstrip(kbuf);
 
 	for (i = 0; i < ARRAY_SIZE(debugfs_loop_modes_v3_hw); i++) {
-		if (!strncmp(debugfs_loop_modes_v3_hw[i].name, pkbuf, 16)) {
+		if (!strncmp(debugfs_loop_modes_v3_hw[i].name, pkbuf,
+			     BIST_BUF_SIZE)) {
 			hisi_hba->debugfs_bist_mode =
 				debugfs_loop_modes_v3_hw[i].value;
 			found = true;
@@ -4525,8 +4579,9 @@ static int debugfs_fifo_data_v3_hw_show(struct seq_file *s, void *p)
 
 	debugfs_read_fifo_data_v3_hw(phy);
 
-	debugfs_show_row_32_v3_hw(s, 0, HISI_SAS_FIFO_DATA_DW_SIZE * 4,
-				  (__le32 *)phy->fifo.rd_data);
+	debugfs_show_row_32_v3_hw(s, 0,
+			HISI_SAS_FIFO_DATA_DW_SIZE * HISI_SAS_REG_MEM_SIZE,
+			phy->fifo.rd_data);
 
 	return 0;
 }
@@ -4658,14 +4713,14 @@ static int debugfs_alloc_v3_hw(struct hisi_hba *hisi_hba, int dump_index)
 		struct hisi_sas_debugfs_regs *regs =
 				&hisi_hba->debugfs_regs[dump_index][r];
 
-		sz = debugfs_reg_array_v3_hw[r]->count * 4;
+		sz = debugfs_reg_array_v3_hw[r]->count * HISI_SAS_REG_MEM_SIZE;
 		regs->data = devm_kmalloc(dev, sz, GFP_KERNEL);
 		if (!regs->data)
 			goto fail;
 		regs->hisi_hba = hisi_hba;
 	}
 
-	sz = debugfs_port_reg.count * 4;
+	sz = debugfs_port_reg.count * HISI_SAS_REG_MEM_SIZE;
 	for (p = 0; p < hisi_hba->n_phy; p++) {
 		struct hisi_sas_debugfs_port *port =
 				&hisi_hba->debugfs_port_reg[dump_index][p];
@@ -4775,11 +4830,11 @@ static void debugfs_phy_down_cnt_init_v3_hw(struct hisi_hba *hisi_hba)
 {
 	struct dentry *dir = debugfs_create_dir("phy_down_cnt",
 						hisi_hba->debugfs_dir);
-	char name[16];
+	char name[NAME_BUF_SIZE];
 	int phy_no;
 
 	for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
-		snprintf(name, 16, "%d", phy_no);
+		snprintf(name, NAME_BUF_SIZE, "%d", phy_no);
 		debugfs_create_file(name, 0600, dir,
 				    &hisi_hba->phy[phy_no],
 				    &debugfs_phy_down_cnt_v3_hw_fops);
@@ -4964,7 +5019,7 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	shost->max_id = HISI_SAS_MAX_DEVICES;
 	shost->max_lun = ~0;
 	shost->max_channel = 1;
-	shost->max_cmd_len = 16;
+	shost->max_cmd_len = HISI_SAS_MAX_CDB_LEN;
 	shost->can_queue = HISI_SAS_UNRESERVED_IPTT;
 	shost->cmd_per_lun = HISI_SAS_UNRESERVED_IPTT;
 	if (hisi_hba->iopoll_q_cnt)
@@ -5042,12 +5097,13 @@ hisi_sas_v3_destroy_irqs(struct pci_dev *pdev, struct hisi_hba *hisi_hba)
 {
 	int i;
 
-	devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 1), hisi_hba);
-	devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 2), hisi_hba);
-	devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 11), hisi_hba);
+	devm_free_irq(&pdev->dev, pci_irq_vector(pdev, IRQ_PHY_UP_DOWN_INDEX), hisi_hba);
+	devm_free_irq(&pdev->dev, pci_irq_vector(pdev, IRQ_CHL_INDEX), hisi_hba);
+	devm_free_irq(&pdev->dev, pci_irq_vector(pdev, IRQ_AXI_INDEX), hisi_hba);
 	for (i = 0; i < hisi_hba->cq_nvecs; i++) {
 		struct hisi_sas_cq *cq = &hisi_hba->cq[i];
-		int nr = hisi_sas_intr_conv ? 16 : 16 + i;
+		int nr = hisi_sas_intr_conv ? BASE_VECTORS_V3_HW :
+					      BASE_VECTORS_V3_HW + i;
 
 		devm_free_irq(&pdev->dev, pci_irq_vector(pdev, nr), cq);
 	}
-- 
2.33.0

[PATCH 3/5] scsi: hisi_sas: Code style cleanup

[Yihang Li]

Here are some useless blank lines and symbols, remove them and add spaces
around operators.

Signed-off-by: Yihang Li <liyihang9@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas.h       |  8 ++++----
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 11 +++--------
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |  2 +-
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c |  6 +++---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 15 ++++++---------
 5 files changed, 17 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 0f1bc6445aca..ace97934d563 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -358,7 +358,7 @@ struct hisi_sas_hw {
 	const struct scsi_host_template *sht;
 };
 
-#define HISI_SAS_MAX_DEBUGFS_DUMP (50)
+#define HISI_SAS_MAX_DEBUGFS_DUMP 50
 #define HISI_SAS_DEFAULT_DEBUGFS_DUMP 1
 
 struct hisi_sas_debugfs_cq {
@@ -459,12 +459,12 @@ struct hisi_hba {
 	dma_addr_t sata_breakpoint_dma;
 	struct hisi_sas_slot	*slot_info;
 	unsigned long flags;
-	const struct hisi_sas_hw *hw;	/* Low level hw interface */
+	const struct hisi_sas_hw *hw; /* Low level hw interface */
 	unsigned long sata_dev_bitmap[BITS_TO_LONGS(HISI_SAS_MAX_DEVICES)];
 	struct work_struct rst_work;
 	u32 phy_state;
-	u32 intr_coal_ticks;	/* Time of interrupt coalesce in us */
-	u32 intr_coal_count;	/* Interrupt count to coalesce */
+	u32 intr_coal_ticks; /* Time of interrupt coalesce in us */
+	u32 intr_coal_count; /* Interrupt count to coalesce */
 
 	int cq_nvecs;
 	unsigned int *reply_map;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 9f36037ed1cb..9e6ee32aa56e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -124,12 +124,10 @@ u8 hisi_sas_get_ata_protocol(struct sas_task *task)
 		}
 
 	default:
-	{
 		if (direction == DMA_NONE)
 			return HISI_SAS_SATA_PROTOCOL_NONDATA;
 		return hisi_sas_get_ata_protocol_from_tf(qc);
 	}
-	}
 }
 EXPORT_SYMBOL_GPL(hisi_sas_get_ata_protocol);
 
@@ -141,7 +139,7 @@ void hisi_sas_sata_done(struct sas_task *task,
 	struct hisi_sas_status_buffer *status_buf =
 			hisi_sas_status_buf_addr_mem(slot);
 	u8 *iu = &status_buf->iu[0];
-	struct dev_to_host_fis *d2h =  (struct dev_to_host_fis *)iu;
+	struct dev_to_host_fis *d2h = (struct dev_to_host_fis *)iu;
 
 	resp->frame_len = sizeof(struct dev_to_host_fis);
 	memcpy(&resp->ending_fis[0], d2h, sizeof(struct dev_to_host_fis));
@@ -1948,12 +1946,9 @@ static int hisi_sas_lu_reset(struct domain_device *device, u8 *lun)
 	hisi_sas_dereg_device(hisi_hba, device);
 
 	if (dev_is_sata(device)) {
-		struct sas_phy *phy;
-
-		phy = sas_get_local_phy(device);
+		struct sas_phy *phy = sas_get_local_phy(device);
 
 		rc = sas_phy_reset(phy, true);
-
 		if (rc == 0)
 			hisi_sas_release_task(hisi_hba, device);
 		sas_put_local_phy(phy);
@@ -2137,7 +2132,7 @@ void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy,
 		hisi_sas_bytes_dmaed(hisi_hba, phy_no, gfp_flags);
 		hisi_sas_port_notify_formed(sas_phy);
 	} else {
-		struct hisi_sas_port *port  = phy->port;
+		struct hisi_sas_port *port = phy->port;
 
 		if (test_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags) ||
 		    phy->in_reset) {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 6621d633b2cc..6d97339371fb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1759,7 +1759,7 @@ static const struct scsi_host_template sht_v1_hw = {
 	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.sdev_init		= hisi_sas_sdev_init,
 	.shost_groups		= host_v1_hw_groups,
-	.host_reset             = hisi_sas_host_reset,
+	.host_reset		= hisi_sas_host_reset,
 };
 
 static const struct hisi_sas_hw hisi_sas_v1_hw = {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index be2c0b628595..bdd28ce45cd8 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2771,7 +2771,7 @@ static irqreturn_t int_phy_updown_v2_hw(int irq_no, void *p)
 	irq_msk = (hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO)
 		   >> HGC_INVLD_DQE_INFO_FB_CH0_OFF) & 0x1ff;
 	while (irq_msk) {
-		if (irq_msk  & 1) {
+		if (irq_msk & 1) {
 			u32 reg_value = hisi_sas_phy_read32(hisi_hba, phy_no,
 					    CHL_INT0);
 
@@ -3111,7 +3111,7 @@ static irqreturn_t fatal_axi_int_v2_hw(int irq_no, void *p)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t  cq_thread_v2_hw(int irq_no, void *p)
+static irqreturn_t cq_thread_v2_hw(int irq_no, void *p)
 {
 	struct hisi_sas_cq *cq = p;
 	struct hisi_hba *hisi_hba = cq->hisi_hba;
@@ -3499,7 +3499,7 @@ static int write_gpio_v2_hw(struct hisi_hba *hisi_hba, u8 reg_type,
 			 * numbered drive in the fourth byte.
 			 * See SFF-8485 Rev. 0.7 Table 24.
 			 */
-			void __iomem  *reg_addr = hisi_hba->sgpio_regs +
+			void __iomem *reg_addr = hisi_hba->sgpio_regs +
 					reg_index * 4 + phy_no;
 			int data_idx = phy_no + 3 - (phy_no % 4) * 2;
 
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index e739b09aea9a..c3cbeb556440 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1351,8 +1351,8 @@ static void prep_ssp_v3_hw(struct hisi_hba *hisi_hba,
 	/* map itct entry */
 	dw1 |= sas_dev->device_id << CMD_HDR_DEV_ID_OFF;
 
-	dw2 = (((sizeof(struct ssp_command_iu) + sizeof(struct ssp_frame_hdr)
-	      + 3) / BYTE_TO_DW) << CMD_HDR_CFL_OFF) |
+	dw2 = (((sizeof(struct ssp_command_iu) + sizeof(struct ssp_frame_hdr) +
+	         3) / BYTE_TO_DW) << CMD_HDR_CFL_OFF) |
 	      ((HISI_SAS_MAX_SSP_RESP_SZ / BYTE_TO_DW) << CMD_HDR_MRFL_OFF) |
 	      (HDR_SG_MOD << CMD_HDR_SG_MOD_OFF);
 	hdr->dw2 = cpu_to_le32(dw2);
@@ -1749,7 +1749,7 @@ static irqreturn_t int_phy_up_down_bcast_v3_hw(int irq_no, void *p)
 	irq_msk = hisi_sas_read32(hisi_hba, CHNL_INT_STATUS)
 				& 0x11111111;
 	while (irq_msk) {
-		if (irq_msk  & 1) {
+		if (irq_msk & 1) {
 			u32 irq_value = hisi_sas_phy_read32(hisi_hba, phy_no,
 							    CHL_INT0);
 			u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
@@ -1972,8 +1972,7 @@ static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
 	u32 irq_msk;
 	int phy_no = 0;
 
-	irq_msk = hisi_sas_read32(hisi_hba, CHNL_INT_STATUS)
-		  & CHNL_INT_STS_MSK;
+	irq_msk = hisi_sas_read32(hisi_hba, CHNL_INT_STATUS) & CHNL_INT_STS_MSK;
 
 	while (irq_msk) {
 		if (irq_msk & (CHNL_INT_STS_INT0_MSK << (phy_no * CHNL_WIDTH)))
@@ -2618,7 +2617,6 @@ static int interrupt_preinit_v3_hw(struct hisi_hba *hisi_hba)
 	if (vectors < 0)
 		return -ENOENT;
 
-
 	hisi_hba->cq_nvecs = vectors - BASE_VECTORS_V3_HW - hisi_hba->iopoll_q_cnt;
 	shost->nr_hw_queues = hisi_hba->cq_nvecs + hisi_hba->iopoll_q_cnt;
 
@@ -3325,7 +3323,7 @@ static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable)
 		/* some preparations before bist test */
 		hisi_sas_bist_test_prep_v3_hw(hisi_hba);
 
-		/* set linkrate of bit test*/
+		/* set linkrate of bit test */
 		reg_val = hisi_sas_phy_read32(hisi_hba, phy_no,
 					      PROG_PHY_LINK_RATE);
 		reg_val &= ~CFG_PROG_OOB_PHY_LINK_RATE_MSK;
@@ -3426,7 +3424,7 @@ static const struct scsi_host_template sht_v3_hw = {
 	.shost_groups		= host_v3_hw_groups,
 	.sdev_groups		= sdev_groups_v3_hw,
 	.tag_alloc_policy_rr	= true,
-	.host_reset             = hisi_sas_host_reset,
+	.host_reset		= hisi_sas_host_reset,
 	.host_tagset		= 1,
 	.mq_poll		= queue_complete_v3_hw,
 };
@@ -3679,7 +3677,6 @@ static void debugfs_print_reg_v3_hw(u32 *regs_val, struct seq_file *s,
 
 		name = debugfs_to_reg_name_v3_hw(off, reg->base_off,
 						 reg->lu);
-
 		if (name)
 			seq_printf(s, "0x%08x 0x%08x %s\n", off,
 				   regs_val[i], name);
-- 
2.33.0

[PATCH 4/5] scsi: hisi_sas: Call I_T_nexus after soft reset for SATA disk

[Yihang Li]

In commit 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe
I_T nexus reset failure"), if the softreset fails upon certain conditions,
the PHY connected to the disk is disabled directly. Manual recovery is
required, which is inconvenient for users in actual use.

In addition, SATA disks do not support simultaneous connection of multiple
hosts. Therefore, when multiple controllers are connected to a SATA disk
at the same time, the controller which is connected later failed to issue
an ATA softreset to the SATA disk. As a result, the PHY associated with
the disk is disabled and cannot be automatically recovered.

Now that, we will not focus on the execution result of softreset. No
matter whether the execution is successful or not, we will directly carry
out I_T_nexus_reset.

Fixes: 21c7e972475e ("scsi: hisi_sas: Disable SATA disk phy for severe I_T
nexus reset failure")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 29 +++++----------------------
 1 file changed, 5 insertions(+), 24 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 9e6ee32aa56e..f4b6d678ba72 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -1897,33 +1897,14 @@ static int hisi_sas_I_T_nexus_reset(struct domain_device *device)
 	}
 	hisi_sas_dereg_device(hisi_hba, device);
 
-	rc = hisi_sas_debug_I_T_nexus_reset(device);
-	if (rc == TMF_RESP_FUNC_COMPLETE && dev_is_sata(device)) {
-		struct sas_phy *local_phy;
-
+	if (dev_is_sata(device)) {
 		rc = hisi_sas_softreset_ata_disk(device);
-		switch (rc) {
-		case -ECOMM:
-			rc = -ENODEV;
-			break;
-		case TMF_RESP_FUNC_FAILED:
-		case -EMSGSIZE:
-		case -EIO:
-			local_phy = sas_get_local_phy(device);
-			rc = sas_phy_enable(local_phy, 0);
-			if (!rc) {
-				local_phy->enabled = 0;
-				dev_err(dev, "Disabled local phy of ATA disk %016llx due to softreset fail (%d)\n",
-					SAS_ADDR(device->sas_addr), rc);
-				rc = -ENODEV;
-			}
-			sas_put_local_phy(local_phy);
-			break;
-		default:
-			break;
-		}
+		if (rc == TMF_RESP_FUNC_FAILED)
+			dev_err(dev, "ata disk %016llx reset (%d)\n",
+				SAS_ADDR(device->sas_addr), rc);
 	}
 
+	rc = hisi_sas_debug_I_T_nexus_reset(device);
 	if ((rc == TMF_RESP_FUNC_COMPLETE) || (rc == -ENODEV))
 		hisi_sas_release_task(hisi_hba, device);
 
-- 
2.33.0

[PATCH 5/5] scsi: hisi_sas: Wait until eh is recovered

[Yihang Li]

SATA devices are lost when FLR is performed while the controller and disks
are in suspended state.

This is because the libata layer is called to initialize the SATA device
during controller resuming. If FLR is executed at this time, the IDENTIFY
command fails. As a result, the revalidate fails, and the SATA device is
disabled by the libata layer.

So, wait until eh is recovered.

Signed-off-by: Yihang Li <liyihang9@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index c3cbeb556440..97ff48e7fe5d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -5130,9 +5130,11 @@ static void hisi_sas_reset_prepare_v3_hw(struct pci_dev *pdev)
 {
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 	struct hisi_hba *hisi_hba = sha->lldd_ha;
+	struct Scsi_Host *shost = hisi_hba->shost;
 	struct device *dev = hisi_hba->dev;
 	int rc;
 
+	wait_event(shost->host_wait, !scsi_host_in_recovery(shost));
 	dev_info(dev, "FLR prepare\n");
 	down(&hisi_hba->sem);
 	set_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags);
-- 
2.33.0