From: Patrick Wildt <patrick@blueri.se>
To: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Kever Yang <kever.yang@rock-chips.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jimmy Hon <honyuenkwun@gmail.com>
Subject: Re: [PATCH v4 2/2] arm64: dts: rockchip: add MNT Reform 2
Date: Sat, 1 Mar 2025 11:32:06 +0100 [thread overview]
Message-ID: <Z8LiJgNkurF3xt3k@windev.fritz.box> (raw)
In-Reply-To: <2700899.tdWV9SEqCh@phil>
On Sun, Feb 23, 2025 at 12:38:40AM +0100, Heiko Stuebner wrote:
> Hi Patrick,
>
> Am Montag, 17. Februar 2025, 21:22:28 MEZ schrieb Patrick Wildt:
> > MNT Reform 2 is an open source laptop with replaceable CPU modules,
> > including a version with the RK3588-based MNT RCORE[1], which is based
> > on Firefly's iCore-3588Q SoM:
> >
> > - Rockchip RK3588
> > - Quad A76 and Quad A55 CPU
> > - 6 TOPS NPU
> > - up to 32GB LPDDR4x RAM
> > - SD Card slot
> > - Gigabit ethernet port
> > - HDMI port
> > - 2x mPCIe ports for WiFi or NVMe
> > - 3x USB 3.0 Type-A HOST port
> >
> > [1] https://shop.mntre.com/products/mnt-reform
> >
> > Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
> > Signed-off-by: Patrick Wildt <patrick@blueri.se>
>
> bureaucracy question, what is Lukas' relationship with the patch?
> Two options:
> (1) Lukas initially developed the patch, then the "From:" should be
> set accordingly
> (2) Both of you developed it together, then we should have a
> Co-Developed-by: Lukas F. Hartmann <lukas@mntre.com>
> up there
>
Thanks, will send a v5 with Co-developed-by tag added! :)
>
> Some more style things below...
>
Are there further execptions to the alphabetical rule? For regulators
I often see min before max, which I think makes sense to understand
the range but isn't technically alphabetical. The same for pinctrl-0
and pinctrl-names.
Thanks,
Patrick
>
> > ---
> > Changes for v4:
> > - Added chassis-type.
> > - Removed unused nodes.
> > - Sorted nodes alphabetically.
> > Changes for v3:
> > - Split DT as it's based on a Firefly iCore-3588Q SoM.
> > Changes for v2:
> > - Aligned with bindings and schemas to appease DTB check warnings.
> > - Aligned with format of other RK3588 boards for consistency.
> >
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > .../rockchip/rk3588-firefly-icore-3588q.dtsi | 451 ++++++++++++++++++
> > .../boot/dts/rockchip/rk3588-mnt-reform2.dts | 336 +++++++++++++
> > 3 files changed, 788 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index def1222c1907..88381d9a20e3 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -145,6 +145,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-firefly-itx-3588j.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-h96-max-v58.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-mnt-reform2.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi
> > new file mode 100644
> > index 000000000000..898a7b29692f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi
> > @@ -0,0 +1,451 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +
> > +#include "rk3588.dtsi"
> > +
> > +/ {
> > + compatible = "firefly,icore-3588q", "rockchip,rk3588";
> > +
> > + aliases {
> > + mmc0 = &sdhci;
> > + };
> > +};
> > +
> > +&cpu_b0 {
> > + cpu-supply = <&vdd_cpu_big0_s0>;
> > + mem-supply = <&vdd_cpu_big0_s0>;
>
> you don't need the unspecified mem-supply for the cpu cores,
> that is vendor-kernel voodoo and not part of the upstream binding.
>
> Same for all cores.
>
>
> > +};
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts b/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts
> > new file mode 100644
> > index 000000000000..936dd959524f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts
> > @@ -0,0 +1,336 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> > + * Copyright (c) 2024 MNT Research GmbH
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include <dt-bindings/soc/rockchip,vop2.h>
> > +#include <dt-bindings/usb/pd.h>
> > +
> > +#include "rk3588-firefly-icore-3588q.dtsi"
> > +
> > +/ {
> > + model = "MNT Reform 2 with RCORE RK3588 Module";
> > + compatible = "mntre,reform2-rcore", "firefly,icore-3588q", "rockchip,rk3588";
> > + chassis-type = "laptop";
> > +
> > + aliases {
> > + ethernet0 = &gmac0;
> > + mmc1 = &sdmmc;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial2:1500000n8";
> > + };
> > +
> > + backlight: backlight {
> > + compatible = "pwm-backlight";
> > + pwms = <&pwm8 0 10000 0>;
> > + enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
> > + brightness-levels = <0 8 16 32 64 128 160 200 255>;
> > + default-brightness-level = <128>;
>
> please sort standard properties alphabetically (compatible at the top,
> status at the bottom, rest alphabetically)
>
> > + };
> > +
> > +&pcie2x1l2 {
> > + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> > + pinctrl-0 = <&pcie2_0_rst>;
>
> more sorting
>
> > + status = "okay";
> > +};
> > +
>
> > +&pcie3x4 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pcie3_reset>;
> > + reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
> > + num-lanes = <1>;
>
> again sorting
>
> > + vpcie3v3-supply = <&vcc3v3_pcie30>;
> > + status = "okay";
> > +};
> > +
>
> > +&sdmmc {
> > + bus-width = <4>;
> > + max-frequency = <40000000>;
> > + no-sdio;
> > + no-mmc;
> > + no-1-8-v;
> > + cap-sd-highspeed;
> > + vqmmc-supply = <&vcc3v3_pcie30>;
> > + vmmc-supply = <&vcc3v3_pcie30>;
> > + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> > + disable-wp;
>
> more sorting
>
> > + status = "okay";
> > +};
> > +
>
>
> Heiko
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Patrick Wildt <patrick@blueri.se>
To: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Kever Yang <kever.yang@rock-chips.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jimmy Hon <honyuenkwun@gmail.com>
Subject: Re: [PATCH v4 2/2] arm64: dts: rockchip: add MNT Reform 2
Date: Sat, 1 Mar 2025 11:32:06 +0100 [thread overview]
Message-ID: <Z8LiJgNkurF3xt3k@windev.fritz.box> (raw)
In-Reply-To: <2700899.tdWV9SEqCh@phil>
On Sun, Feb 23, 2025 at 12:38:40AM +0100, Heiko Stuebner wrote:
> Hi Patrick,
>
> Am Montag, 17. Februar 2025, 21:22:28 MEZ schrieb Patrick Wildt:
> > MNT Reform 2 is an open source laptop with replaceable CPU modules,
> > including a version with the RK3588-based MNT RCORE[1], which is based
> > on Firefly's iCore-3588Q SoM:
> >
> > - Rockchip RK3588
> > - Quad A76 and Quad A55 CPU
> > - 6 TOPS NPU
> > - up to 32GB LPDDR4x RAM
> > - SD Card slot
> > - Gigabit ethernet port
> > - HDMI port
> > - 2x mPCIe ports for WiFi or NVMe
> > - 3x USB 3.0 Type-A HOST port
> >
> > [1] https://shop.mntre.com/products/mnt-reform
> >
> > Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
> > Signed-off-by: Patrick Wildt <patrick@blueri.se>
>
> bureaucracy question, what is Lukas' relationship with the patch?
> Two options:
> (1) Lukas initially developed the patch, then the "From:" should be
> set accordingly
> (2) Both of you developed it together, then we should have a
> Co-Developed-by: Lukas F. Hartmann <lukas@mntre.com>
> up there
>
Thanks, will send a v5 with Co-developed-by tag added! :)
>
> Some more style things below...
>
Are there further execptions to the alphabetical rule? For regulators
I often see min before max, which I think makes sense to understand
the range but isn't technically alphabetical. The same for pinctrl-0
and pinctrl-names.
Thanks,
Patrick
>
> > ---
> > Changes for v4:
> > - Added chassis-type.
> > - Removed unused nodes.
> > - Sorted nodes alphabetically.
> > Changes for v3:
> > - Split DT as it's based on a Firefly iCore-3588Q SoM.
> > Changes for v2:
> > - Aligned with bindings and schemas to appease DTB check warnings.
> > - Aligned with format of other RK3588 boards for consistency.
> >
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > .../rockchip/rk3588-firefly-icore-3588q.dtsi | 451 ++++++++++++++++++
> > .../boot/dts/rockchip/rk3588-mnt-reform2.dts | 336 +++++++++++++
> > 3 files changed, 788 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index def1222c1907..88381d9a20e3 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -145,6 +145,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-firefly-itx-3588j.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-friendlyelec-cm3588-nas.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-h96-max-v58.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-mnt-reform2.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi
> > new file mode 100644
> > index 000000000000..898a7b29692f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-firefly-icore-3588q.dtsi
> > @@ -0,0 +1,451 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +
> > +#include "rk3588.dtsi"
> > +
> > +/ {
> > + compatible = "firefly,icore-3588q", "rockchip,rk3588";
> > +
> > + aliases {
> > + mmc0 = &sdhci;
> > + };
> > +};
> > +
> > +&cpu_b0 {
> > + cpu-supply = <&vdd_cpu_big0_s0>;
> > + mem-supply = <&vdd_cpu_big0_s0>;
>
> you don't need the unspecified mem-supply for the cpu cores,
> that is vendor-kernel voodoo and not part of the upstream binding.
>
> Same for all cores.
>
>
> > +};
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts b/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts
> > new file mode 100644
> > index 000000000000..936dd959524f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588-mnt-reform2.dts
> > @@ -0,0 +1,336 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> > + * Copyright (c) 2024 MNT Research GmbH
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/input/input.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include <dt-bindings/soc/rockchip,vop2.h>
> > +#include <dt-bindings/usb/pd.h>
> > +
> > +#include "rk3588-firefly-icore-3588q.dtsi"
> > +
> > +/ {
> > + model = "MNT Reform 2 with RCORE RK3588 Module";
> > + compatible = "mntre,reform2-rcore", "firefly,icore-3588q", "rockchip,rk3588";
> > + chassis-type = "laptop";
> > +
> > + aliases {
> > + ethernet0 = &gmac0;
> > + mmc1 = &sdmmc;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial2:1500000n8";
> > + };
> > +
> > + backlight: backlight {
> > + compatible = "pwm-backlight";
> > + pwms = <&pwm8 0 10000 0>;
> > + enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
> > + brightness-levels = <0 8 16 32 64 128 160 200 255>;
> > + default-brightness-level = <128>;
>
> please sort standard properties alphabetically (compatible at the top,
> status at the bottom, rest alphabetically)
>
> > + };
> > +
> > +&pcie2x1l2 {
> > + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> > + pinctrl-0 = <&pcie2_0_rst>;
>
> more sorting
>
> > + status = "okay";
> > +};
> > +
>
> > +&pcie3x4 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pcie3_reset>;
> > + reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
> > + num-lanes = <1>;
>
> again sorting
>
> > + vpcie3v3-supply = <&vcc3v3_pcie30>;
> > + status = "okay";
> > +};
> > +
>
> > +&sdmmc {
> > + bus-width = <4>;
> > + max-frequency = <40000000>;
> > + no-sdio;
> > + no-mmc;
> > + no-1-8-v;
> > + cap-sd-highspeed;
> > + vqmmc-supply = <&vcc3v3_pcie30>;
> > + vmmc-supply = <&vcc3v3_pcie30>;
> > + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> > + disable-wp;
>
> more sorting
>
> > + status = "okay";
> > +};
> > +
>
>
> Heiko
>
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2025-03-01 10:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-17 20:21 [PATCH v4 1/2] dt-bindings: arm: rockchip: Add MNT Reform 2 (RCORE) Patrick Wildt
2025-02-17 20:21 ` Patrick Wildt
2025-02-17 20:22 ` [PATCH v4 2/2] arm64: dts: rockchip: add MNT Reform 2 Patrick Wildt
2025-02-17 20:22 ` Patrick Wildt
2025-02-22 23:38 ` Heiko Stuebner
2025-02-22 23:38 ` Heiko Stuebner
2025-03-01 10:32 ` Patrick Wildt [this message]
2025-03-01 10:32 ` Patrick Wildt
2025-03-01 11:10 ` Heiko Stübner
2025-03-01 11:10 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z8LiJgNkurF3xt3k@windev.fritz.box \
--to=patrick@blueri.se \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=honyuenkwun@gmail.com \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.