All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] Fix some typos
@ 2025-03-13 19:16 Thomas Huth
  2025-03-14  3:02 ` David Gibson
  0 siblings, 1 reply; 3+ messages in thread
From: Thomas Huth @ 2025-03-13 19:16 UTC (permalink / raw)
  To: devicetree-compiler

Discovered with the "codespell" utility.

Signed-off-by: Thomas Huth <thuth@redhat.com>
---
 README.license           | 2 +-
 dtc.c                    | 2 +-
 dtc.h                    | 2 +-
 flattree.c               | 2 +-
 libfdt/libfdt_internal.h | 4 ++--
 pylibfdt/libfdt.i        | 2 +-
 tests/comments.dts       | 2 +-
 tests/nopulate.c         | 2 +-
 tests/run_tests.sh       | 2 +-
 tests/testutils.c        | 6 +++---
 tests/utilfdt_test.c     | 2 +-
 11 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/README.license b/README.license
index 102b004..a4edc2b 100644
--- a/README.license
+++ b/README.license
@@ -28,7 +28,7 @@ tools.  Allowing libfdt to be used under the terms of the BSD license
 makes that it easier for vendors or authors of such software to do so.
 
 This does mean that libfdt code could be "stolen" - say, included in a
-proprietary fimware and extended without contributing those extensions
+proprietary firmware and extended without contributing those extensions
 back to the libfdt mainline.  While I hope that doesn't happen, I
 believe the goal of allowing libfdt to be widely used is more
 important than avoiding that.  libfdt is quite small, and hardly
diff --git a/dtc.c b/dtc.c
index beda8d5..b3445b7 100644
--- a/dtc.c
+++ b/dtc.c
@@ -15,7 +15,7 @@ int quiet;		/* Level of quietness */
 unsigned int reservenum;/* Number of memory reservation slots */
 int minsize;		/* Minimum blob size */
 int padsize;		/* Additional padding to blob */
-int alignsize;		/* Additional padding to blob accroding to the alignsize */
+int alignsize;		/* Additional padding to blob according to the alignsize */
 int phandle_format = PHANDLE_EPAPR;	/* Use linux,phandle or phandle properties */
 int generate_symbols;	/* enable symbols & fixup support */
 int generate_fixups;		/* suppress generation of fixups on symbol support */
diff --git a/dtc.h b/dtc.h
index 4c4aaca..9acf071 100644
--- a/dtc.h
+++ b/dtc.h
@@ -38,7 +38,7 @@ extern int quiet;		/* Level of quietness */
 extern unsigned int reservenum;	/* Number of memory reservation slots */
 extern int minsize;		/* Minimum blob size */
 extern int padsize;		/* Additional padding to blob */
-extern int alignsize;		/* Additional padding to blob accroding to the alignsize */
+extern int alignsize;		/* Additional padding to blob according to the alignsize */
 extern int phandle_format;	/* Use linux,phandle or phandle properties */
 extern int generate_symbols;	/* generate symbols for nodes with labels */
 extern int generate_fixups;	/* generate fixups */
diff --git a/flattree.c b/flattree.c
index 1bcd808..30e6de2 100644
--- a/flattree.c
+++ b/flattree.c
@@ -503,7 +503,7 @@ void dt_to_asm(FILE *f, struct dt_info *dti, int version)
 	 * Reserve map entries.
 	 * Align the reserve map to a doubleword boundary.
 	 * Each entry is an (address, size) pair of u64 values.
-	 * Always supply a zero-sized temination entry.
+	 * Always supply a zero-sized termination entry.
 	 */
 	asm_emit_align(f, 8);
 	emit_label(f, symprefix, "reserve_map");
diff --git a/libfdt/libfdt_internal.h b/libfdt/libfdt_internal.h
index 1fd35f3..773bba8 100644
--- a/libfdt/libfdt_internal.h
+++ b/libfdt/libfdt_internal.h
@@ -56,8 +56,8 @@ static inline struct fdt_reserve_entry *fdt_mem_rsv_w_(void *fdt, int n)
 }
 
 /*
- * Internal helpers to access tructural elements of the device tree
- * blob (rather than for exaple reading integers from within property
+ * Internal helpers to access structural elements of the device tree
+ * blob (rather than for example reading integers from within property
  * values).  We assume that we are either given a naturally aligned
  * address for the platform or if we are not, we are on a platform
  * where unaligned memory reads will be handled in a graceful manner.
diff --git a/pylibfdt/libfdt.i b/pylibfdt/libfdt.i
index bb9985c..1f9c047 100644
--- a/pylibfdt/libfdt.i
+++ b/pylibfdt/libfdt.i
@@ -162,7 +162,7 @@ class FdtRo(object):
             quiet: Errors to ignore (empty to raise on all errors)
 
         Returns:
-            Typle:
+            Tuple:
                 Offset of the next node, if any, else a -ve error
                 Depth of the returned node, if any, else undefined
 
diff --git a/tests/comments.dts b/tests/comments.dts
index 0b04b6b..d315d7f 100644
--- a/tests/comments.dts
+++ b/tests/comments.dts
@@ -25,7 +25,7 @@
 	prop7;
 	/* yet
 	 * another
-	 * multline
+	 * multiline
 	 * comment
 	 */
 	prop8;
diff --git a/tests/nopulate.c b/tests/nopulate.c
index e06a0b3..06f8369 100644
--- a/tests/nopulate.c
+++ b/tests/nopulate.c
@@ -65,7 +65,7 @@ int main(int argc, char *argv[])
 
 	verbose_printf("Nopulated structure block has new size %d\n", newsize);
 
-	/* Replace old strcutre block with the new */
+	/* Replace old structure block with the new */
 
 	fdt2 = xmalloc(fdt_totalsize(fdt) + newsize);
 
diff --git a/tests/run_tests.sh b/tests/run_tests.sh
index f0b51c0..fecfe7c 100755
--- a/tests/run_tests.sh
+++ b/tests/run_tests.sh
@@ -805,7 +805,7 @@ dtc_tests () {
     run_dtc_test -I dtb -O dts -o stdin_odts_test_tree1.dtb.test.dts - < test_tree1.dtb
     run_wrap_test cmp stdin_odts_test_tree1.dtb.test.dts odts_test_tree1.dtb.test.dts
 
-    # Check integer expresisons
+    # Check integer expressions
     run_test integer-expressions -g integer-expressions.test.dts
     run_dtc_test -I dts -O dtb -o integer-expressions.test.dtb integer-expressions.test.dts
     run_test integer-expressions integer-expressions.test.dtb
diff --git a/tests/testutils.c b/tests/testutils.c
index 4c85111..54da2e4 100644
--- a/tests/testutils.c
+++ b/tests/testutils.c
@@ -131,7 +131,7 @@ void check_property(void *fdt, int nodeoffset, const char *name,
 		     " differs from stored length (%d != %d)",
 		     name, retlen, proplen);
 	if (proplen != len)
-		FAIL("Size mismatch on property \"%s\": %d insead of %d",
+		FAIL("Size mismatch on property \"%s\": %d instead of %d",
 		     name, proplen, len);
 	if (len && memcmp(val, prop->data, len) != 0)
 		FAIL("Data mismatch on property \"%s\"", name);
@@ -148,7 +148,7 @@ const void *check_getprop(void *fdt, int nodeoffset, const char *name,
 		FAIL("fdt_getprop(\"%s\"): %s", name, fdt_strerror(proplen));
 
 	if (proplen != len)
-		FAIL("Size mismatch on property \"%s\": %d insead of %d",
+		FAIL("Size mismatch on property \"%s\": %d instead of %d",
 		     name, proplen, len);
 	if (len && memcmp(val, propval, len) != 0)
 		FAIL("Data mismatch on property \"%s\"", name);
@@ -172,7 +172,7 @@ const void *check_get_prop_offset(void *fdt, int poffset, const char *exp_name,
 		return NULL;
 
 	if (proplen != exp_len)
-		FAIL("Size mismatch on property \"%s\": %d insead of %d",
+		FAIL("Size mismatch on property \"%s\": %d instead of %d",
 		     name, proplen, exp_len);
 	if (exp_len && memcmp(exp_val, propval, exp_len))
 		FAIL("Data mismatch on property \"%s\"", name);
diff --git a/tests/utilfdt_test.c b/tests/utilfdt_test.c
index f62341c..992807d 100644
--- a/tests/utilfdt_test.c
+++ b/tests/utilfdt_test.c
@@ -46,7 +46,7 @@ static void checkfail(const char *fmt)
  * Add the given modifier to each of the valid sizes, and check that we get
  * correct values.
  *
- * \param modifier	Modifer string to use as a prefix
+ * \param modifier	Modifier string to use as a prefix
  * \param expected_size	The size (in bytes) that we expect (ignored for
  *			strings)
  */
-- 
2.48.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread
* [PATCH] Fix some typos.
@ 2008-01-07 21:43 Ralf Wildenhues
  0 siblings, 0 replies; 3+ messages in thread
From: Ralf Wildenhues @ 2008-01-07 21:43 UTC (permalink / raw)
  To: git

Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
---

 Documentation/gitcli.txt                |    2 +-
 Documentation/technical/api-diff.txt    |    6 +++---
 Documentation/technical/pack-format.txt |    2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/gitcli.txt b/Documentation/gitcli.txt
index b7dcf9c..07899ec 100644
--- a/Documentation/gitcli.txt
+++ b/Documentation/gitcli.txt
@@ -95,7 +95,7 @@ $ git foo -oArg
 $ git foo -o Arg
 ----------------------------
 
-However, this is *NOT* allowed for switches with an optionnal value, where the
+However, this is *NOT* allowed for switches with an optional value, where the
 'sticked' form must be used:
 ----------------------------
 $ git describe --abbrev HEAD     # correct
diff --git a/Documentation/technical/api-diff.txt b/Documentation/technical/api-diff.txt
index 822609b..83b007e 100644
--- a/Documentation/technical/api-diff.txt
+++ b/Documentation/technical/api-diff.txt
@@ -102,13 +102,13 @@ Notable members are:
 	and copies.
 
 `abbrev`::
-	Number of hexdigits to abbrevate raw format output to.
+	Number of hexdigits to abbreviate raw format output to.
 
 `pickaxe`::
 	A constant string (can and typically does contain newlines to
 	look for a block of text, not just a single line) to filter out
 	the filepairs that do not change the number of strings contained
-	in its preimage and postmage of the diff_queue.
+	in its preimage and postimage of the diff_queue.
 
 `flags`::
 	This is mostly a collection of boolean options that affects the
@@ -149,7 +149,7 @@ REVERSE_DIFF;;
 
 EXIT_WITH_STATUS;;
 	For communication between the calling program and the options
-	parser; tell the calling program to signal the presense of
+	parser; tell the calling program to signal the presence of
 	difference using program exit code.
 
 HAS_CHANGES;;
diff --git a/Documentation/technical/pack-format.txt b/Documentation/technical/pack-format.txt
index a80baa4..aa87756 100644
--- a/Documentation/technical/pack-format.txt
+++ b/Documentation/technical/pack-format.txt
@@ -125,7 +125,7 @@ Pack file entry: <+
 
   - A table of 4-byte CRC32 values of the packed object data.
     This is new in v2 so compressed data can be copied directly
-    from pack to pack during repacking withough undetected
+    from pack to pack during repacking without undetected
     data corruption.
 
   - A table of 4-byte offset values (in network byte order).
-- 
1.5.4.rc2.17.g257f

^ permalink raw reply related	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-03-14  3:03 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-03-13 19:16 [PATCH] Fix some typos Thomas Huth
2025-03-14  3:02 ` David Gibson
  -- strict thread matches above, loose matches on Subject: below --
2008-01-07 21:43 Ralf Wildenhues

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.