* [PATCH 1/1] USB: serial: option: add Telit FE990 compositions
@ 2023-03-06 12:07 Enrico Sau
2023-03-13 15:08 ` Johan Hovold
0 siblings, 1 reply; 3+ messages in thread
From: Enrico Sau @ 2023-03-06 12:07 UTC (permalink / raw)
To: Johan Hovold; +Cc: Greg Kroah-Hartman, linux-usb, Enrico Sau
Add the following Telit FE990 compositions:
0x1080: tty, adb, rmnet, tty, tty, tty, tty
0x1081: tty, adb, mbim, tty, tty, tty, tty
0x1082: rndis, tty, adb, tty, tty, tty, tty
0x1083: tty, adb, ecm, tty, tty, tty, tty
Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
---
This is the usb-devices output for all compositions:
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 12 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1080 Rev=05.04
S: Manufacturer=Telit Wireless Solutions
S: Product=FE990
S: SerialNumber=9455d1d2
C: #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 13 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1081 Rev=05.04
S: Manufacturer=Telit Wireless Solutions
S: Product=FE990
S: SerialNumber=9455d1d2
C: #Ifs= 8 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I: If#=0x2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 11 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1082 Rev=05.04
S: Manufacturer=Telit Wireless Solutions
S: Product=FE990
S: SerialNumber=9455d1d2
C: #Ifs= 8 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 14 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1083 Rev=05.04
S: Manufacturer=Telit Wireless Solutions
S: Product=FE990
S: SerialNumber=9455d1d2
C: #Ifs= 8 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
I: If#=0x2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#=0x3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I: If#=0x7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
---
drivers/usb/serial/option.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e6d8d9b35ad0..9520935bd502 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1300,6 +1300,14 @@ static const struct usb_device_id option_ids[] = {
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990 (PCIe) */
.driver_info = RSVD(0) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990 (rmnet) */
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990 (MBIM) */
+ .driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990 (RNDIS) */
+ .driver_info = NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */
+ .driver_info = RSVD(0) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/1] USB: serial: option: add Telit FE990 compositions
2023-03-06 12:07 [PATCH 1/1] USB: serial: option: add Telit FE990 compositions Enrico Sau
@ 2023-03-13 15:08 ` Johan Hovold
2023-03-13 15:17 ` Enrico Sau
0 siblings, 1 reply; 3+ messages in thread
From: Johan Hovold @ 2023-03-13 15:08 UTC (permalink / raw)
To: Enrico Sau; +Cc: Greg Kroah-Hartman, linux-usb
On Mon, Mar 06, 2023 at 01:07:41PM +0100, Enrico Sau wrote:
> Add the following Telit FE990 compositions:
>
> 0x1080: tty, adb, rmnet, tty, tty, tty, tty
> 0x1081: tty, adb, mbim, tty, tty, tty, tty
> 0x1082: rndis, tty, adb, tty, tty, tty, tty
> 0x1083: tty, adb, ecm, tty, tty, tty, tty
>
> Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
> ---
>
> This is the usb-devices output for all compositions:
>
> T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 12 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=1bc7 ProdID=1080 Rev=05.04
> S: Manufacturer=Telit Wireless Solutions
> S: Product=FE990
> S: SerialNumber=9455d1d2
> C: #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
> I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
> I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
>
> T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 13 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=1bc7 ProdID=1081 Rev=05.04
> S: Manufacturer=Telit Wireless Solutions
> S: Product=FE990
> S: SerialNumber=9455d1d2
> C: #Ifs= 8 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> I: If#=0x2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
> I: If#=0x3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
> I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
> I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> I: If#=0x7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
>
> T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 11 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=1bc7 ProdID=1082 Rev=05.04
> S: Manufacturer=Telit Wireless Solutions
> S: Product=FE990
> S: SerialNumber=9455d1d2
> C: #Ifs= 8 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
> I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
> I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> I: If#=0x7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
>
> T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 14 Spd=480 MxCh= 0
> D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=1bc7 ProdID=1083 Rev=05.04
> S: Manufacturer=Telit Wireless Solutions
> S: Product=FE990
> S: SerialNumber=9455d1d2
> C: #Ifs= 8 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
> I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> I: If#=0x2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
> I: If#=0x3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
> I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
> I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
> I: If#=0x7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
>
> ---
> drivers/usb/serial/option.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> index e6d8d9b35ad0..9520935bd502 100644
> --- a/drivers/usb/serial/option.c
> +++ b/drivers/usb/serial/option.c
> @@ -1300,6 +1300,14 @@ static const struct usb_device_id option_ids[] = {
> .driver_info = NCTRL(0) | RSVD(1) },
> { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990 (PCIe) */
> .driver_info = RSVD(0) },
> + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1080, 0xff), /* Telit FE990 (rmnet) */
> + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
> + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1081, 0xff), /* Telit FE990 (MBIM) */
> + .driver_info = NCTRL(0) | RSVD(1) },
> + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1082, 0xff), /* Telit FE990 (RNDIS) */
> + .driver_info = NCTRL(2) | RSVD(3) },
> + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */
> + .driver_info = RSVD(0) },
This entry does not seem to match the usb-devices output above (e.g.
it looks like this should be NCTRL(0) | RSVD(1)).
Please double check this one and the others.
> { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
> .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
> { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
Johan
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH 1/1] USB: serial: option: add Telit FE990 compositions
2023-03-13 15:08 ` Johan Hovold
@ 2023-03-13 15:17 ` Enrico Sau
0 siblings, 0 replies; 3+ messages in thread
From: Enrico Sau @ 2023-03-13 15:17 UTC (permalink / raw)
To: Johan Hovold; +Cc: Greg Kroah-Hartman, linux-usb
> This entry does not seem to match the usb-devices output above (e.g.
> it looks like this should be NCTRL(0) | RSVD(1)).
>
> Please double check this one and the others.
Got it, sorry, I will fix.
Enrico
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-03-13 15:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-03-06 12:07 [PATCH 1/1] USB: serial: option: add Telit FE990 compositions Enrico Sau
2023-03-13 15:08 ` Johan Hovold
2023-03-13 15:17 ` Enrico Sau
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.