Re: [PATCH V3 1/7] clk: imx: fracn-gppll: fix the rate table

[Abel Vesa <abel.vesa@linaro.org>]

On 23-04-03 17:52:54, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> The Fvco should be range 2.4GHz to 5GHz, the original table voilate the
> spec, so update the table to fix it.
> 
> Fixes: c196175acdd3 ("clk: imx: clk-fracn-gppll: Add more freq config for video pll")
> Fixes: 044034efbeea ("clk: imx: clk-fracn-gppll: fix mfd value")
> Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
> Signed-off-by: Jacky Bai <ping.bai@nxp.com>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>

Reviewed-by: Abel Vesa <abel.vesa@linaro.org>

> ---
>  drivers/clk/imx/clk-fracn-gppll.c | 16 +++++++++-------
>  1 file changed, 9 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/clk/imx/clk-fracn-gppll.c b/drivers/clk/imx/clk-fracn-gppll.c
> index a2aaa14fc1ae..ec50c41e2a4c 100644
> --- a/drivers/clk/imx/clk-fracn-gppll.c
> +++ b/drivers/clk/imx/clk-fracn-gppll.c
> @@ -60,18 +60,20 @@ struct clk_fracn_gppll {
>  };
>  
>  /*
> - * Fvco = Fref * (MFI + MFN / MFD)
> - * Fout = Fvco / (rdiv * odiv)
> + * Fvco = (Fref / rdiv) * (MFI + MFN / MFD)
> + * Fout = Fvco / odiv
> + * The (Fref / rdiv) should be in range 20MHz to 40MHz
> + * The Fvco should be in range 2.5Ghz to 5Ghz
>   */
>  static const struct imx_fracn_gppll_rate_table fracn_tbl[] = {
> -	PLL_FRACN_GP(650000000U, 81, 0, 1, 0, 3),
> +	PLL_FRACN_GP(650000000U, 162, 50, 100, 0, 6),
>  	PLL_FRACN_GP(594000000U, 198, 0, 1, 0, 8),
> -	PLL_FRACN_GP(560000000U, 70, 0, 1, 0, 3),
> -	PLL_FRACN_GP(498000000U, 83, 0, 1, 0, 4),
> +	PLL_FRACN_GP(560000000U, 140, 0, 1, 0, 6),
> +	PLL_FRACN_GP(498000000U, 166, 0, 1, 0, 8),
>  	PLL_FRACN_GP(484000000U, 121, 0, 1, 0, 6),
>  	PLL_FRACN_GP(445333333U, 167, 0, 1, 0, 9),
> -	PLL_FRACN_GP(400000000U, 50, 0, 1, 0, 3),
> -	PLL_FRACN_GP(393216000U, 81, 92, 100, 0, 5)
> +	PLL_FRACN_GP(400000000U, 200, 0, 1, 0, 12),
> +	PLL_FRACN_GP(393216000U, 163, 84, 100, 0, 10)
>  };
>  
>  struct imx_fracn_gppll_clk imx_fracn_gppll = {
> -- 
> 2.37.1
>