Re: [PATCH v5] Fix freeze in lm8333 i2c keyboard driver

[Jeff LaBundy <jeff@labundy.com>]

Hi Tomas,

On Wed, May 03, 2023 at 05:32:31PM +0200, Tomas Mudrunka wrote:
> LM8333 uses gpio interrupt line which is triggered by falling edge.
> When button is pressed before driver is loaded,
> driver will miss the edge and never respond again.
> To fix this we run the interrupt handler before registering IRQ
> to clear the interrupt via i2c command.
> 
> Signed-off-by: Tomas Mudrunka <tomas.mudrunka@gmail.com>
> ---

Reviewed-by: Jeff LaBundy <jeff@labundy.com>

>  drivers/input/keyboard/lm8333.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c
> index 7457c3220..52108c370 100644
> --- a/drivers/input/keyboard/lm8333.c
> +++ b/drivers/input/keyboard/lm8333.c
> @@ -178,6 +178,8 @@ static int lm8333_probe(struct i2c_client *client)
>  			dev_warn(&client->dev, "Unable to set active time\n");
>  	}
>  
> +	lm8333_irq_thread(client->irq, lm8333);
> +
>  	err = request_threaded_irq(client->irq, NULL, lm8333_irq_thread,
>  				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>  				   "lm8333", lm8333);
> -- 
> 2.40.1

Thank you for the productive discussion.

Kind regards,
Jeff LaBundy