Re: [PATCH 2/4] arm64: dts: qcom: sm8250: Add missing interconnect paths to USB HCs

[Abel Vesa <abel.vesa@linaro.org>]

On 23-06-01 14:22:35, Konrad Dybcio wrote:
> 
> 
> On 1.06.2023 14:00, Abel Vesa wrote:
> > The USB HCs nodes are missing the interconnect paths, so add them.
> > 
> > Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > index e5c60a6e4074..eefd3dcbb2e1 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > @@ -3750,6 +3750,10 @@ usb_1: usb@a6f8800 {
> >  
> >  			resets = <&gcc GCC_USB30_PRIM_BCR>;
> >  
> > +			interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
> > +					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
> You need to update #interconnect-cells to 2.

Ugh, missed that. Will send a new version.

Thanks,
Abel

> 
> Konrad
> > +			interconnect-names = "usb-ddr", "apps-usb";
> > +
> >  			usb_1_dwc3: usb@a600000 {
> >  				compatible = "snps,dwc3";
> >  				reg = <0 0x0a600000 0 0xcd00>;
> > @@ -3810,6 +3814,10 @@ usb_2: usb@a8f8800 {
> >  
> >  			resets = <&gcc GCC_USB30_SEC_BCR>;
> >  
> > +			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
> > +					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
> > +			interconnect-names = "usb-ddr", "apps-usb";
> > +
> >  			usb_2_dwc3: usb@a800000 {
> >  				compatible = "snps,dwc3";
> >  				reg = <0 0x0a800000 0 0xcd00>;