* [PATCH 1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs
@ 2023-06-01 12:00 Abel Vesa
2023-06-01 12:00 ` [PATCH 2/4] arm64: dts: qcom: sm8250: " Abel Vesa
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Abel Vesa @ 2023-06-01 12:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, Linux Kernel Mailing List
The USB HCs nodes are missing the interconnect paths, so add them.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 197c016aaeba..4e73808c7bb1 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3595,6 +3595,10 @@ usb_1: usb@a6f8800 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
@@ -3644,6 +3648,10 @@ usb_2: usb@a8f8800 {
resets = <&gcc GCC_USB30_SEC_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
--
2.34.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 2/4] arm64: dts: qcom: sm8250: Add missing interconnect paths to USB HCs
2023-06-01 12:00 [PATCH 1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs Abel Vesa
@ 2023-06-01 12:00 ` Abel Vesa
2023-06-01 12:22 ` Konrad Dybcio
2023-06-01 12:00 ` [PATCH 3/4] arm64: dts: qcom: sm8350: " Abel Vesa
` (2 subsequent siblings)
3 siblings, 1 reply; 9+ messages in thread
From: Abel Vesa @ 2023-06-01 12:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, Linux Kernel Mailing List
The USB HCs nodes are missing the interconnect paths, so add them.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e5c60a6e4074..eefd3dcbb2e1 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3750,6 +3750,10 @@ usb_1: usb@a6f8800 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
@@ -3810,6 +3814,10 @@ usb_2: usb@a8f8800 {
resets = <&gcc GCC_USB30_SEC_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
--
2.34.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 3/4] arm64: dts: qcom: sm8350: Add missing interconnect paths to USB HCs
2023-06-01 12:00 [PATCH 1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs Abel Vesa
2023-06-01 12:00 ` [PATCH 2/4] arm64: dts: qcom: sm8250: " Abel Vesa
@ 2023-06-01 12:00 ` Abel Vesa
2023-06-01 12:23 ` Konrad Dybcio
2023-06-01 12:00 ` [PATCH 4/4] arm64: dts: qcom: sm8450: Add missing interconnect paths to USB HC Abel Vesa
2023-06-01 12:22 ` [PATCH 1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs Konrad Dybcio
3 siblings, 1 reply; 9+ messages in thread
From: Abel Vesa @ 2023-06-01 12:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, Linux Kernel Mailing List
The USB HCs nodes are missing the interconnect paths, so add them.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 2798a5d6e5f7..88ef478cb5cc 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -2304,6 +2304,10 @@ usb_1: usb@a6f8800 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
@@ -2373,6 +2377,10 @@ usb_2: usb@a8f8800 {
resets = <&gcc GCC_USB30_SEC_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
--
2.34.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 4/4] arm64: dts: qcom: sm8450: Add missing interconnect paths to USB HC
2023-06-01 12:00 [PATCH 1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs Abel Vesa
2023-06-01 12:00 ` [PATCH 2/4] arm64: dts: qcom: sm8250: " Abel Vesa
2023-06-01 12:00 ` [PATCH 3/4] arm64: dts: qcom: sm8350: " Abel Vesa
@ 2023-06-01 12:00 ` Abel Vesa
2023-06-01 12:23 ` Konrad Dybcio
2023-06-01 12:22 ` [PATCH 1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs Konrad Dybcio
3 siblings, 1 reply; 9+ messages in thread
From: Abel Vesa @ 2023-06-01 12:00 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, Linux Kernel Mailing List
The USB HC node is missing the interconnect paths, so add them.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 11560ec9f182..5cd7296c7660 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4306,6 +4306,10 @@ usb_1: usb@a6f8800 {
resets = <&gcc GCC_USB30_PRIM_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
--
2.34.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs
2023-06-01 12:00 [PATCH 1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs Abel Vesa
` (2 preceding siblings ...)
2023-06-01 12:00 ` [PATCH 4/4] arm64: dts: qcom: sm8450: Add missing interconnect paths to USB HC Abel Vesa
@ 2023-06-01 12:22 ` Konrad Dybcio
3 siblings, 0 replies; 9+ messages in thread
From: Konrad Dybcio @ 2023-06-01 12:22 UTC (permalink / raw)
To: Abel Vesa, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, Linux Kernel Mailing List
On 1.06.2023 14:00, Abel Vesa wrote:
> The USB HCs nodes are missing the interconnect paths, so add them.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 197c016aaeba..4e73808c7bb1 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -3595,6 +3595,10 @@ usb_1: usb@a6f8800 {
>
> resets = <&gcc GCC_USB30_PRIM_BCR>;
>
> + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
> + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
> + interconnect-names = "usb-ddr", "apps-usb";
You need to update interconnect-cells to 2.
Konrad
> +
> usb_1_dwc3: usb@a600000 {
> compatible = "snps,dwc3";
> reg = <0 0x0a600000 0 0xcd00>;
> @@ -3644,6 +3648,10 @@ usb_2: usb@a8f8800 {
>
> resets = <&gcc GCC_USB30_SEC_BCR>;
>
> + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
> + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
> + interconnect-names = "usb-ddr", "apps-usb";
> +
> usb_2_dwc3: usb@a800000 {
> compatible = "snps,dwc3";
> reg = <0 0x0a800000 0 0xcd00>;
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/4] arm64: dts: qcom: sm8250: Add missing interconnect paths to USB HCs
2023-06-01 12:00 ` [PATCH 2/4] arm64: dts: qcom: sm8250: " Abel Vesa
@ 2023-06-01 12:22 ` Konrad Dybcio
2023-06-02 5:43 ` Abel Vesa
0 siblings, 1 reply; 9+ messages in thread
From: Konrad Dybcio @ 2023-06-01 12:22 UTC (permalink / raw)
To: Abel Vesa, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, Linux Kernel Mailing List
On 1.06.2023 14:00, Abel Vesa wrote:
> The USB HCs nodes are missing the interconnect paths, so add them.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index e5c60a6e4074..eefd3dcbb2e1 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -3750,6 +3750,10 @@ usb_1: usb@a6f8800 {
>
> resets = <&gcc GCC_USB30_PRIM_BCR>;
>
> + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
> + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
You need to update #interconnect-cells to 2.
Konrad
> + interconnect-names = "usb-ddr", "apps-usb";
> +
> usb_1_dwc3: usb@a600000 {
> compatible = "snps,dwc3";
> reg = <0 0x0a600000 0 0xcd00>;
> @@ -3810,6 +3814,10 @@ usb_2: usb@a8f8800 {
>
> resets = <&gcc GCC_USB30_SEC_BCR>;
>
> + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
> + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
> + interconnect-names = "usb-ddr", "apps-usb";
> +
> usb_2_dwc3: usb@a800000 {
> compatible = "snps,dwc3";
> reg = <0 0x0a800000 0 0xcd00>;
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 3/4] arm64: dts: qcom: sm8350: Add missing interconnect paths to USB HCs
2023-06-01 12:00 ` [PATCH 3/4] arm64: dts: qcom: sm8350: " Abel Vesa
@ 2023-06-01 12:23 ` Konrad Dybcio
0 siblings, 0 replies; 9+ messages in thread
From: Konrad Dybcio @ 2023-06-01 12:23 UTC (permalink / raw)
To: Abel Vesa, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, Linux Kernel Mailing List
On 1.06.2023 14:00, Abel Vesa wrote:
> The USB HCs nodes are missing the interconnect paths, so add them.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 2798a5d6e5f7..88ef478cb5cc 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -2304,6 +2304,10 @@ usb_1: usb@a6f8800 {
>
> resets = <&gcc GCC_USB30_PRIM_BCR>;
>
> + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
> + interconnect-names = "usb-ddr", "apps-usb";
> +
> usb_1_dwc3: usb@a600000 {
> compatible = "snps,dwc3";
> reg = <0 0x0a600000 0 0xcd00>;
> @@ -2373,6 +2377,10 @@ usb_2: usb@a8f8800 {
>
> resets = <&gcc GCC_USB30_SEC_BCR>;
>
> + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
> + interconnect-names = "usb-ddr", "apps-usb";
> +
> usb_2_dwc3: usb@a800000 {
> compatible = "snps,dwc3";
> reg = <0 0x0a800000 0 0xcd00>;
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 4/4] arm64: dts: qcom: sm8450: Add missing interconnect paths to USB HC
2023-06-01 12:00 ` [PATCH 4/4] arm64: dts: qcom: sm8450: Add missing interconnect paths to USB HC Abel Vesa
@ 2023-06-01 12:23 ` Konrad Dybcio
0 siblings, 0 replies; 9+ messages in thread
From: Konrad Dybcio @ 2023-06-01 12:23 UTC (permalink / raw)
To: Abel Vesa, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, Linux Kernel Mailing List
On 1.06.2023 14:00, Abel Vesa wrote:
> The USB HC node is missing the interconnect paths, so add them.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm8450.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 11560ec9f182..5cd7296c7660 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -4306,6 +4306,10 @@ usb_1: usb@a6f8800 {
>
> resets = <&gcc GCC_USB30_PRIM_BCR>;
>
> + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
> + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
> + interconnect-names = "usb-ddr", "apps-usb";
> +
> usb_1_dwc3: usb@a600000 {
> compatible = "snps,dwc3";
> reg = <0 0x0a600000 0 0xcd00>;
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 2/4] arm64: dts: qcom: sm8250: Add missing interconnect paths to USB HCs
2023-06-01 12:22 ` Konrad Dybcio
@ 2023-06-02 5:43 ` Abel Vesa
0 siblings, 0 replies; 9+ messages in thread
From: Abel Vesa @ 2023-06-02 5:43 UTC (permalink / raw)
To: Konrad Dybcio
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, linux-arm-msm, devicetree,
Linux Kernel Mailing List
On 23-06-01 14:22:35, Konrad Dybcio wrote:
>
>
> On 1.06.2023 14:00, Abel Vesa wrote:
> > The USB HCs nodes are missing the interconnect paths, so add them.
> >
> > Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > index e5c60a6e4074..eefd3dcbb2e1 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > @@ -3750,6 +3750,10 @@ usb_1: usb@a6f8800 {
> >
> > resets = <&gcc GCC_USB30_PRIM_BCR>;
> >
> > + interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
> You need to update #interconnect-cells to 2.
Ugh, missed that. Will send a new version.
Thanks,
Abel
>
> Konrad
> > + interconnect-names = "usb-ddr", "apps-usb";
> > +
> > usb_1_dwc3: usb@a600000 {
> > compatible = "snps,dwc3";
> > reg = <0 0x0a600000 0 0xcd00>;
> > @@ -3810,6 +3814,10 @@ usb_2: usb@a8f8800 {
> >
> > resets = <&gcc GCC_USB30_SEC_BCR>;
> >
> > + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
> > + <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
> > + interconnect-names = "usb-ddr", "apps-usb";
> > +
> > usb_2_dwc3: usb@a800000 {
> > compatible = "snps,dwc3";
> > reg = <0 0x0a800000 0 0xcd00>;
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2023-06-02 5:43 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-06-01 12:00 [PATCH 1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs Abel Vesa
2023-06-01 12:00 ` [PATCH 2/4] arm64: dts: qcom: sm8250: " Abel Vesa
2023-06-01 12:22 ` Konrad Dybcio
2023-06-02 5:43 ` Abel Vesa
2023-06-01 12:00 ` [PATCH 3/4] arm64: dts: qcom: sm8350: " Abel Vesa
2023-06-01 12:23 ` Konrad Dybcio
2023-06-01 12:00 ` [PATCH 4/4] arm64: dts: qcom: sm8450: Add missing interconnect paths to USB HC Abel Vesa
2023-06-01 12:23 ` Konrad Dybcio
2023-06-01 12:22 ` [PATCH 1/4] arm64: dts: qcom: sm8150: Add missing interconnect paths to USB HCs Konrad Dybcio
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.