All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Sandor Yu <Sandor.yu@nxp.com>
Cc: andrzej.hajda@intel.com, neil.armstrong@linaro.org,
	robert.foss@linaro.org, Laurent.pinchart@ideasonboard.com,
	jonas@kwiboo.se, jernej.skrabec@gmail.com, airlied@gmail.com,
	daniel@ffwll.ch, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, festevam@gmail.com,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
	kernel@pengutronix.de, linux-imx@nxp.com, oliver.brown@nxp.com
Subject: Re: [PATCH v6 4/8] phy: Add HDMI configuration options
Date: Wed, 21 Jun 2023 16:52:10 +0530	[thread overview]
Message-ID: <ZJLdYlhnLVgK8J8r@matsya> (raw)
In-Reply-To: <cec469206a166c4b070fd7d7bbf89a8df656ccc6.1686729444.git.Sandor.yu@nxp.com>

On 15-06-23, 09:38, Sandor Yu wrote:
> Allow HDMI PHYs to be configured through the generic
> functions through a custom structure added to the generic union.
> 
> The parameters added here are based on HDMI PHY
> implementation practices.  The current set of parameters
> should cover the potential users.
> 
> Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
> ---
>  include/linux/phy/phy-hdmi.h | 38 ++++++++++++++++++++++++++++++++++++
>  include/linux/phy/phy.h      |  7 ++++++-
>  2 files changed, 44 insertions(+), 1 deletion(-)
>  create mode 100644 include/linux/phy/phy-hdmi.h
> 
> diff --git a/include/linux/phy/phy-hdmi.h b/include/linux/phy/phy-hdmi.h
> new file mode 100644
> index 000000000000..5765aa5bc175
> --- /dev/null
> +++ b/include/linux/phy/phy-hdmi.h
> @@ -0,0 +1,38 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2022 NXP
> + */
> +
> +#ifndef __PHY_HDMI_H_
> +#define __PHY_HDMI_H_
> +
> +/**
> + * Pixel Encoding as HDMI Specification
> + * RGB, YUV422, YUV444:HDMI Specification 1.4a Section 6.5
> + * YUV420: HDMI Specification 2.a Section 7.1
> + */
> +enum hdmi_phy_colorspace {
> +	HDMI_PHY_COLORSPACE_RGB,        /* RGB 4:4:4 */
> +	HDMI_PHY_COLORSPACE_YUV422,     /* YCbCr 4:2:2 */
> +	HDMI_PHY_COLORSPACE_YUV444,     /* YCbCr 4:4:4 */
> +	HDMI_PHY_COLORSPACE_YUV420,     /* YCbCr 4:2:0 */

Better add this comments and above one as expected by kernel-doc for
enum..

> +	HDMI_PHY_COLORSPACE_RESERVED4,
> +	HDMI_PHY_COLORSPACE_RESERVED5,
> +	HDMI_PHY_COLORSPACE_RESERVED6,
> +};
> +
> +/**
> + * struct phy_configure_opts_hdmi - HDMI configuration set
> + * @pixel_clk_rate:	Pixel clock of video modes in KHz.
> + * @bpc: Maximum bits per color channel.
> + * @color_space: Colorspace in enum hdmi_phy_colorspace.
> + *
> + * This structure is used to represent the configuration state of a HDMI phy.
> + */
> +struct phy_configure_opts_hdmi {
> +	unsigned int pixel_clk_rate;
> +	unsigned int bpc;
> +	enum hdmi_phy_colorspace color_space;
> +};
> +
> +#endif /* __PHY_HDMI_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 3a570bc59fc7..93d77d45b1d4 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -17,6 +17,7 @@
>  #include <linux/regulator/consumer.h>
>  
>  #include <linux/phy/phy-dp.h>
> +#include <linux/phy/phy-hdmi.h>
>  #include <linux/phy/phy-lvds.h>
>  #include <linux/phy/phy-mipi-dphy.h>
>  
> @@ -42,7 +43,8 @@ enum phy_mode {
>  	PHY_MODE_MIPI_DPHY,
>  	PHY_MODE_SATA,
>  	PHY_MODE_LVDS,
> -	PHY_MODE_DP
> +	PHY_MODE_DP,
> +	PHY_MODE_HDMI,
>  };
>  
>  enum phy_media {
> @@ -60,11 +62,14 @@ enum phy_media {
>   *		the DisplayPort protocol.
>   * @lvds:	Configuration set applicable for phys supporting
>   *		the LVDS phy mode.
> + * @hdmi:	Configuration set applicable for phys supporting
> + *		the HDMI phy mode.
>   */
>  union phy_configure_opts {
>  	struct phy_configure_opts_mipi_dphy	mipi_dphy;
>  	struct phy_configure_opts_dp		dp;
>  	struct phy_configure_opts_lvds		lvds;
> +	struct phy_configure_opts_hdmi		hdmi;
>  };
>  
>  /**
> -- 
> 2.34.1

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Sandor Yu <Sandor.yu@nxp.com>
Cc: andrzej.hajda@intel.com, neil.armstrong@linaro.org,
	robert.foss@linaro.org, Laurent.pinchart@ideasonboard.com,
	jonas@kwiboo.se, jernej.skrabec@gmail.com, airlied@gmail.com,
	daniel@ffwll.ch, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, festevam@gmail.com,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
	kernel@pengutronix.de, linux-imx@nxp.com, oliver.brown@nxp.com
Subject: Re: [PATCH v6 4/8] phy: Add HDMI configuration options
Date: Wed, 21 Jun 2023 16:52:10 +0530	[thread overview]
Message-ID: <ZJLdYlhnLVgK8J8r@matsya> (raw)
In-Reply-To: <cec469206a166c4b070fd7d7bbf89a8df656ccc6.1686729444.git.Sandor.yu@nxp.com>

On 15-06-23, 09:38, Sandor Yu wrote:
> Allow HDMI PHYs to be configured through the generic
> functions through a custom structure added to the generic union.
> 
> The parameters added here are based on HDMI PHY
> implementation practices.  The current set of parameters
> should cover the potential users.
> 
> Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
> ---
>  include/linux/phy/phy-hdmi.h | 38 ++++++++++++++++++++++++++++++++++++
>  include/linux/phy/phy.h      |  7 ++++++-
>  2 files changed, 44 insertions(+), 1 deletion(-)
>  create mode 100644 include/linux/phy/phy-hdmi.h
> 
> diff --git a/include/linux/phy/phy-hdmi.h b/include/linux/phy/phy-hdmi.h
> new file mode 100644
> index 000000000000..5765aa5bc175
> --- /dev/null
> +++ b/include/linux/phy/phy-hdmi.h
> @@ -0,0 +1,38 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2022 NXP
> + */
> +
> +#ifndef __PHY_HDMI_H_
> +#define __PHY_HDMI_H_
> +
> +/**
> + * Pixel Encoding as HDMI Specification
> + * RGB, YUV422, YUV444:HDMI Specification 1.4a Section 6.5
> + * YUV420: HDMI Specification 2.a Section 7.1
> + */
> +enum hdmi_phy_colorspace {
> +	HDMI_PHY_COLORSPACE_RGB,        /* RGB 4:4:4 */
> +	HDMI_PHY_COLORSPACE_YUV422,     /* YCbCr 4:2:2 */
> +	HDMI_PHY_COLORSPACE_YUV444,     /* YCbCr 4:4:4 */
> +	HDMI_PHY_COLORSPACE_YUV420,     /* YCbCr 4:2:0 */

Better add this comments and above one as expected by kernel-doc for
enum..

> +	HDMI_PHY_COLORSPACE_RESERVED4,
> +	HDMI_PHY_COLORSPACE_RESERVED5,
> +	HDMI_PHY_COLORSPACE_RESERVED6,
> +};
> +
> +/**
> + * struct phy_configure_opts_hdmi - HDMI configuration set
> + * @pixel_clk_rate:	Pixel clock of video modes in KHz.
> + * @bpc: Maximum bits per color channel.
> + * @color_space: Colorspace in enum hdmi_phy_colorspace.
> + *
> + * This structure is used to represent the configuration state of a HDMI phy.
> + */
> +struct phy_configure_opts_hdmi {
> +	unsigned int pixel_clk_rate;
> +	unsigned int bpc;
> +	enum hdmi_phy_colorspace color_space;
> +};
> +
> +#endif /* __PHY_HDMI_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 3a570bc59fc7..93d77d45b1d4 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -17,6 +17,7 @@
>  #include <linux/regulator/consumer.h>
>  
>  #include <linux/phy/phy-dp.h>
> +#include <linux/phy/phy-hdmi.h>
>  #include <linux/phy/phy-lvds.h>
>  #include <linux/phy/phy-mipi-dphy.h>
>  
> @@ -42,7 +43,8 @@ enum phy_mode {
>  	PHY_MODE_MIPI_DPHY,
>  	PHY_MODE_SATA,
>  	PHY_MODE_LVDS,
> -	PHY_MODE_DP
> +	PHY_MODE_DP,
> +	PHY_MODE_HDMI,
>  };
>  
>  enum phy_media {
> @@ -60,11 +62,14 @@ enum phy_media {
>   *		the DisplayPort protocol.
>   * @lvds:	Configuration set applicable for phys supporting
>   *		the LVDS phy mode.
> + * @hdmi:	Configuration set applicable for phys supporting
> + *		the HDMI phy mode.
>   */
>  union phy_configure_opts {
>  	struct phy_configure_opts_mipi_dphy	mipi_dphy;
>  	struct phy_configure_opts_dp		dp;
>  	struct phy_configure_opts_lvds		lvds;
> +	struct phy_configure_opts_hdmi		hdmi;
>  };
>  
>  /**
> -- 
> 2.34.1

-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Sandor Yu <Sandor.yu@nxp.com>
Cc: andrzej.hajda@intel.com, neil.armstrong@linaro.org,
	robert.foss@linaro.org, Laurent.pinchart@ideasonboard.com,
	jonas@kwiboo.se, jernej.skrabec@gmail.com, airlied@gmail.com,
	daniel@ffwll.ch, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, festevam@gmail.com,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
	kernel@pengutronix.de, linux-imx@nxp.com, oliver.brown@nxp.com
Subject: Re: [PATCH v6 4/8] phy: Add HDMI configuration options
Date: Wed, 21 Jun 2023 16:52:10 +0530	[thread overview]
Message-ID: <ZJLdYlhnLVgK8J8r@matsya> (raw)
In-Reply-To: <cec469206a166c4b070fd7d7bbf89a8df656ccc6.1686729444.git.Sandor.yu@nxp.com>

On 15-06-23, 09:38, Sandor Yu wrote:
> Allow HDMI PHYs to be configured through the generic
> functions through a custom structure added to the generic union.
> 
> The parameters added here are based on HDMI PHY
> implementation practices.  The current set of parameters
> should cover the potential users.
> 
> Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
> ---
>  include/linux/phy/phy-hdmi.h | 38 ++++++++++++++++++++++++++++++++++++
>  include/linux/phy/phy.h      |  7 ++++++-
>  2 files changed, 44 insertions(+), 1 deletion(-)
>  create mode 100644 include/linux/phy/phy-hdmi.h
> 
> diff --git a/include/linux/phy/phy-hdmi.h b/include/linux/phy/phy-hdmi.h
> new file mode 100644
> index 000000000000..5765aa5bc175
> --- /dev/null
> +++ b/include/linux/phy/phy-hdmi.h
> @@ -0,0 +1,38 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2022 NXP
> + */
> +
> +#ifndef __PHY_HDMI_H_
> +#define __PHY_HDMI_H_
> +
> +/**
> + * Pixel Encoding as HDMI Specification
> + * RGB, YUV422, YUV444:HDMI Specification 1.4a Section 6.5
> + * YUV420: HDMI Specification 2.a Section 7.1
> + */
> +enum hdmi_phy_colorspace {
> +	HDMI_PHY_COLORSPACE_RGB,        /* RGB 4:4:4 */
> +	HDMI_PHY_COLORSPACE_YUV422,     /* YCbCr 4:2:2 */
> +	HDMI_PHY_COLORSPACE_YUV444,     /* YCbCr 4:4:4 */
> +	HDMI_PHY_COLORSPACE_YUV420,     /* YCbCr 4:2:0 */

Better add this comments and above one as expected by kernel-doc for
enum..

> +	HDMI_PHY_COLORSPACE_RESERVED4,
> +	HDMI_PHY_COLORSPACE_RESERVED5,
> +	HDMI_PHY_COLORSPACE_RESERVED6,
> +};
> +
> +/**
> + * struct phy_configure_opts_hdmi - HDMI configuration set
> + * @pixel_clk_rate:	Pixel clock of video modes in KHz.
> + * @bpc: Maximum bits per color channel.
> + * @color_space: Colorspace in enum hdmi_phy_colorspace.
> + *
> + * This structure is used to represent the configuration state of a HDMI phy.
> + */
> +struct phy_configure_opts_hdmi {
> +	unsigned int pixel_clk_rate;
> +	unsigned int bpc;
> +	enum hdmi_phy_colorspace color_space;
> +};
> +
> +#endif /* __PHY_HDMI_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 3a570bc59fc7..93d77d45b1d4 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -17,6 +17,7 @@
>  #include <linux/regulator/consumer.h>
>  
>  #include <linux/phy/phy-dp.h>
> +#include <linux/phy/phy-hdmi.h>
>  #include <linux/phy/phy-lvds.h>
>  #include <linux/phy/phy-mipi-dphy.h>
>  
> @@ -42,7 +43,8 @@ enum phy_mode {
>  	PHY_MODE_MIPI_DPHY,
>  	PHY_MODE_SATA,
>  	PHY_MODE_LVDS,
> -	PHY_MODE_DP
> +	PHY_MODE_DP,
> +	PHY_MODE_HDMI,
>  };
>  
>  enum phy_media {
> @@ -60,11 +62,14 @@ enum phy_media {
>   *		the DisplayPort protocol.
>   * @lvds:	Configuration set applicable for phys supporting
>   *		the LVDS phy mode.
> + * @hdmi:	Configuration set applicable for phys supporting
> + *		the HDMI phy mode.
>   */
>  union phy_configure_opts {
>  	struct phy_configure_opts_mipi_dphy	mipi_dphy;
>  	struct phy_configure_opts_dp		dp;
>  	struct phy_configure_opts_lvds		lvds;
> +	struct phy_configure_opts_hdmi		hdmi;
>  };
>  
>  /**
> -- 
> 2.34.1

-- 
~Vinod

WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Sandor Yu <Sandor.yu@nxp.com>
Cc: dri-devel@lists.freedesktop.org, neil.armstrong@linaro.org,
	oliver.brown@nxp.com, krzysztof.kozlowski+dt@linaro.org,
	jonas@kwiboo.se, shawnguo@kernel.org, s.hauer@pengutronix.de,
	linux-kernel@vger.kernel.org, jernej.skrabec@gmail.com,
	devicetree@vger.kernel.org, robh+dt@kernel.org,
	robert.foss@linaro.org, andrzej.hajda@intel.com,
	linux-phy@lists.infradead.org, linux-imx@nxp.com,
	kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org,
	Laurent.pinchart@ideasonboard.com
Subject: Re: [PATCH v6 4/8] phy: Add HDMI configuration options
Date: Wed, 21 Jun 2023 16:52:10 +0530	[thread overview]
Message-ID: <ZJLdYlhnLVgK8J8r@matsya> (raw)
In-Reply-To: <cec469206a166c4b070fd7d7bbf89a8df656ccc6.1686729444.git.Sandor.yu@nxp.com>

On 15-06-23, 09:38, Sandor Yu wrote:
> Allow HDMI PHYs to be configured through the generic
> functions through a custom structure added to the generic union.
> 
> The parameters added here are based on HDMI PHY
> implementation practices.  The current set of parameters
> should cover the potential users.
> 
> Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
> ---
>  include/linux/phy/phy-hdmi.h | 38 ++++++++++++++++++++++++++++++++++++
>  include/linux/phy/phy.h      |  7 ++++++-
>  2 files changed, 44 insertions(+), 1 deletion(-)
>  create mode 100644 include/linux/phy/phy-hdmi.h
> 
> diff --git a/include/linux/phy/phy-hdmi.h b/include/linux/phy/phy-hdmi.h
> new file mode 100644
> index 000000000000..5765aa5bc175
> --- /dev/null
> +++ b/include/linux/phy/phy-hdmi.h
> @@ -0,0 +1,38 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2022 NXP
> + */
> +
> +#ifndef __PHY_HDMI_H_
> +#define __PHY_HDMI_H_
> +
> +/**
> + * Pixel Encoding as HDMI Specification
> + * RGB, YUV422, YUV444:HDMI Specification 1.4a Section 6.5
> + * YUV420: HDMI Specification 2.a Section 7.1
> + */
> +enum hdmi_phy_colorspace {
> +	HDMI_PHY_COLORSPACE_RGB,        /* RGB 4:4:4 */
> +	HDMI_PHY_COLORSPACE_YUV422,     /* YCbCr 4:2:2 */
> +	HDMI_PHY_COLORSPACE_YUV444,     /* YCbCr 4:4:4 */
> +	HDMI_PHY_COLORSPACE_YUV420,     /* YCbCr 4:2:0 */

Better add this comments and above one as expected by kernel-doc for
enum..

> +	HDMI_PHY_COLORSPACE_RESERVED4,
> +	HDMI_PHY_COLORSPACE_RESERVED5,
> +	HDMI_PHY_COLORSPACE_RESERVED6,
> +};
> +
> +/**
> + * struct phy_configure_opts_hdmi - HDMI configuration set
> + * @pixel_clk_rate:	Pixel clock of video modes in KHz.
> + * @bpc: Maximum bits per color channel.
> + * @color_space: Colorspace in enum hdmi_phy_colorspace.
> + *
> + * This structure is used to represent the configuration state of a HDMI phy.
> + */
> +struct phy_configure_opts_hdmi {
> +	unsigned int pixel_clk_rate;
> +	unsigned int bpc;
> +	enum hdmi_phy_colorspace color_space;
> +};
> +
> +#endif /* __PHY_HDMI_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 3a570bc59fc7..93d77d45b1d4 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -17,6 +17,7 @@
>  #include <linux/regulator/consumer.h>
>  
>  #include <linux/phy/phy-dp.h>
> +#include <linux/phy/phy-hdmi.h>
>  #include <linux/phy/phy-lvds.h>
>  #include <linux/phy/phy-mipi-dphy.h>
>  
> @@ -42,7 +43,8 @@ enum phy_mode {
>  	PHY_MODE_MIPI_DPHY,
>  	PHY_MODE_SATA,
>  	PHY_MODE_LVDS,
> -	PHY_MODE_DP
> +	PHY_MODE_DP,
> +	PHY_MODE_HDMI,
>  };
>  
>  enum phy_media {
> @@ -60,11 +62,14 @@ enum phy_media {
>   *		the DisplayPort protocol.
>   * @lvds:	Configuration set applicable for phys supporting
>   *		the LVDS phy mode.
> + * @hdmi:	Configuration set applicable for phys supporting
> + *		the HDMI phy mode.
>   */
>  union phy_configure_opts {
>  	struct phy_configure_opts_mipi_dphy	mipi_dphy;
>  	struct phy_configure_opts_dp		dp;
>  	struct phy_configure_opts_lvds		lvds;
> +	struct phy_configure_opts_hdmi		hdmi;
>  };
>  
>  /**
> -- 
> 2.34.1

-- 
~Vinod

  reply	other threads:[~2023-06-21 11:22 UTC|newest]

Thread overview: 148+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-15  1:38 [PATCH v6 0/8] Initial support for Cadence MHDP8501(HDMI/DP) for i.MX8MQ Sandor Yu
2023-06-15  1:38 ` Sandor Yu
2023-06-15  1:38 ` Sandor Yu
2023-06-15  1:38 ` Sandor Yu
2023-06-15  1:38 ` [PATCH v6 1/8] drm: bridge: Cadence: convert mailbox functions to macro functions Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38 ` [PATCH v6 2/8] dt-bindings: display: bridge: Add Cadence MHDP8501 HDMI and DP Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-16  9:31   ` Alexander Stein
2023-06-16  9:31     ` Alexander Stein
2023-06-16  9:31     ` Alexander Stein
2023-06-16  9:31     ` Alexander Stein
2023-06-19  3:10     ` [EXT] " Sandor Yu
2023-06-19  3:10       ` Sandor Yu
2023-06-19  3:10       ` Sandor Yu
2023-06-20 15:37     ` Rob Herring
2023-06-20 15:37       ` Rob Herring
2023-06-20 15:37       ` Rob Herring
2023-06-20 15:37       ` Rob Herring
2023-06-20 15:48   ` Rob Herring
2023-06-20 15:48     ` Rob Herring
2023-06-20 15:48     ` Rob Herring
2023-06-20 15:48     ` Rob Herring
2023-06-21  2:23     ` [EXT] " Sandor Yu
2023-06-21  2:23       ` Sandor Yu
2023-06-21  2:23       ` Sandor Yu
2023-06-21  2:23       ` Sandor Yu
2023-06-21  8:14       ` Krzysztof Kozlowski
2023-06-21  8:14         ` Krzysztof Kozlowski
2023-06-21  8:14         ` Krzysztof Kozlowski
2023-06-21  8:14         ` Krzysztof Kozlowski
2023-06-15  1:38 ` [PATCH v6 3/8] drm: bridge: Cadence: Add MHDP8501 DP driver Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15 16:33   ` Sam Ravnborg
2023-06-15 16:33     ` Sam Ravnborg
2023-06-15 16:33     ` Sam Ravnborg
2023-06-15 16:33     ` Sam Ravnborg
2023-06-16  7:13     ` [EXT] " Sandor Yu
2023-06-16  7:13       ` Sandor Yu
2023-06-16  7:13       ` Sandor Yu
2023-06-16  7:13       ` Sandor Yu
2023-06-15  1:38 ` [PATCH v6 4/8] phy: Add HDMI configuration options Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-21 11:22   ` Vinod Koul [this message]
2023-06-21 11:22     ` Vinod Koul
2023-06-21 11:22     ` Vinod Koul
2023-06-21 11:22     ` Vinod Koul
2023-07-10  7:28     ` [EXT] " Sandor Yu
2023-07-10  7:28       ` Sandor Yu
2023-07-10  7:28       ` Sandor Yu
2023-07-10  7:28       ` Sandor Yu
2023-06-24 18:02   ` Dmitry Baryshkov
2023-06-24 18:02     ` Dmitry Baryshkov
2023-06-24 18:02     ` Dmitry Baryshkov
2023-06-24 18:02     ` Dmitry Baryshkov
2023-07-10  7:28     ` [EXT] " Sandor Yu
2023-07-10  7:28       ` Sandor Yu
2023-07-10  7:28       ` Sandor Yu
2023-07-10  7:28       ` Sandor Yu
2023-07-10  7:30       ` Dmitry Baryshkov
2023-07-10  7:30         ` Dmitry Baryshkov
2023-07-10  7:30         ` Dmitry Baryshkov
2023-07-10  7:30         ` Dmitry Baryshkov
2023-07-10  7:41         ` Sandor Yu
2023-07-10  7:41           ` Sandor Yu
2023-07-10  7:41           ` Sandor Yu
2023-07-10  7:41           ` Sandor Yu
2023-07-10  7:44       ` Dmitry Baryshkov
2023-07-10  7:44         ` Dmitry Baryshkov
2023-07-10  7:44         ` Dmitry Baryshkov
2023-07-10  7:44         ` Dmitry Baryshkov
2023-07-10  8:01         ` Sandor Yu
2023-07-10  8:01           ` Sandor Yu
2023-07-10  8:01           ` Sandor Yu
2023-07-10  8:01           ` Sandor Yu
2023-07-10  8:05           ` Dmitry Baryshkov
2023-07-10  8:05             ` Dmitry Baryshkov
2023-07-10  8:05             ` Dmitry Baryshkov
2023-07-10  8:05             ` Dmitry Baryshkov
2023-07-10  8:11             ` Sandor Yu
2023-07-10  8:11               ` Sandor Yu
2023-07-10  8:11               ` Sandor Yu
2023-07-10  8:11               ` Sandor Yu
2023-06-15  1:38 ` [PATCH v6 5/8] drm: bridge: Cadence: Add MHDP8501 HDMI driver Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-16  9:29   ` Alexander Stein
2023-06-16  9:29     ` Alexander Stein
2023-06-16  9:29     ` Alexander Stein
2023-06-16  9:29     ` Alexander Stein
2023-06-19  3:11     ` [EXT] " Sandor Yu
2023-06-19  3:11       ` Sandor Yu
2023-06-19  3:11       ` Sandor Yu
2023-06-19  5:35       ` Alexander Stein
2023-06-19  5:35         ` Alexander Stein
2023-06-19  5:35         ` Alexander Stein
2023-06-15  1:38 ` [PATCH v6 6/8] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-16  9:34   ` Alexander Stein
2023-06-16  9:34     ` Alexander Stein
2023-06-16  9:34     ` Alexander Stein
2023-06-16  9:34     ` Alexander Stein
2023-06-19  3:10     ` [EXT] " Sandor Yu
2023-06-19  3:10       ` Sandor Yu
2023-06-19  3:10       ` Sandor Yu
2023-06-15  1:38 ` [PATCH v6 7/8] phy: freescale: Add DisplayPort PHY driver for i.MX8MQ Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-21 11:24   ` Vinod Koul
2023-06-21 11:24     ` Vinod Koul
2023-06-21 11:24     ` Vinod Koul
2023-06-21 11:24     ` Vinod Koul
2023-07-10  7:30     ` [EXT] " Sandor Yu
2023-07-10  7:30       ` Sandor Yu
2023-07-10  7:30       ` Sandor Yu
2023-07-10  7:30       ` Sandor Yu
2023-06-15  1:38 ` [PATCH v6 8/8] phy: freescale: Add HDMI " Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-15  1:38   ` Sandor Yu
2023-06-21 11:57   ` Vinod Koul
2023-06-21 11:57     ` Vinod Koul
2023-06-21 11:57     ` Vinod Koul
2023-06-21 11:57     ` Vinod Koul
2023-07-10  7:30     ` [EXT] " Sandor Yu
2023-07-10  7:30       ` Sandor Yu
2023-07-10  7:30       ` Sandor Yu
2023-07-10  7:30       ` Sandor Yu
2023-06-16  9:37 ` [PATCH v6 0/8] Initial support for Cadence MHDP8501(HDMI/DP) " Alexander Stein
2023-06-16  9:37   ` Alexander Stein
2023-06-16  9:37   ` Alexander Stein
2023-06-16  9:37   ` Alexander Stein
2023-09-21 14:29 ` Vinod Koul
2023-09-21 14:29   ` Vinod Koul
2023-09-21 14:29   ` Vinod Koul
2023-09-21 14:29   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZJLdYlhnLVgK8J8r@matsya \
    --to=vkoul@kernel.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=Sandor.yu@nxp.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=neil.armstrong@linaro.org \
    --cc=oliver.brown@nxp.com \
    --cc=robert.foss@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.