From: Simon Horman <simon.horman@corigine.com>
To: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Cc: "Rajneesh Bhardwaj" <irenic.rajneesh@gmail.com>,
"David E Box" <david.e.box@intel.com>,
"Hans de Goede" <hdegoede@redhat.com>,
"Mark Gross" <markgross@kernel.org>,
"Jose Abreu" <Jose.Abreu@synopsys.com>,
"Andrew Lunn" <andrew@lunn.ch>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Russell King" <linux@armlinux.org.uk>,
"David S . Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Marek Behún" <kabel@kernel.org>,
"Jean Delvare" <jdelvare@suse.com>,
"Guenter Roeck" <linux@roeck-us.net>,
"Giuseppe Cavallaro" <peppe.cavallaro@st.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Jose Abreu" <joabreu@synopsys.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Richard Cochran" <richardcochran@gmail.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Alexei Starovoitov" <ast@kernel.org>,
"Daniel Borkmann" <daniel@iogearbox.net>,
"Jesper Dangaard Brouer" <hawk@kernel.org>,
"John Fastabend" <john.fastabend@gmail.com>,
"Wong Vee Khee" <veekhee@apple.com>,
"Jon Hunter" <jonathanh@nvidia.com>,
"Jesse Brandeburg" <jesse.brandeburg@intel.com>,
"Revanth Kumar Uppala" <ruppala@nvidia.com>,
"Shenwei Wang" <shenwei.wang@nxp.com>,
"Andrey Konovalov" <andrey.konovalov@linaro.org>,
"Jochen Henneberg" <jh@henneberg-systemdesign.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
platform-driver-x86@vger.kernel.org, linux-hwmon@vger.kernel.org,
bpf@vger.kernel.org, "Voon Wei Feng" <weifeng.voon@intel.com>,
Tan@web.codeaurora.org, "Tee Min" <tee.min.tan@linux.intel.com>,
"Michael Sit Wei Hong" <michael.wei.hong.sit@intel.com>,
"Lai Peter Jun Ann" <jun.ann.lai@intel.com>
Subject: Re: [PATCH net-next 3/6] net: phy: update in-band AN mode when changing interface by PHY driver
Date: Thu, 22 Jun 2023 16:43:51 +0200 [thread overview]
Message-ID: <ZJReJ2yxqKGQx1BU@corigine.com> (raw)
In-Reply-To: <20230622041905.629430-4-yong.liang.choong@linux.intel.com>
On Thu, Jun 22, 2023 at 12:19:02PM +0800, Choong Yong Liang wrote:
> From: "Tan, Tee Min" <tee.min.tan@linux.intel.com>
>
> Add cur_link_an_mode into phy_device struct for PHY drivers to
> communicate the in-band AN mode setting with phylink framework.
>
> As there is a mechanism in PHY drivers to switch the PHY interface
> between SGMII and 2500BaseX according to link speed. In this case,
> the in-band AN mode should be switching based on the PHY interface
> as well, if the PHY interface has been changed/updated by PHY driver.
>
> For e.g., disable in-band AN in 2500BaseX mode, or enable in-band AN
> back for SGMII mode (10/100/1000Mbps).
>
> Signed-off-by: Tan, Tee Min <tee.min.tan@linux.intel.com>
> Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
...
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 11c1e91563d4..c685b526e307 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -756,6 +756,8 @@ struct phy_device {
> /* MACsec management functions */
> const struct macsec_ops *macsec_ops;
> #endif
> + /* For communicate the AN mode setting with phylink framework. */
> + u8 cur_link_an_mode;
> };
Hi Choong Yong Liang,
Please consider adding cur_link_an_mode to the kernel doc
for struct phy_device - which is above the definition of struct phy_device.
WARNING: multiple messages have this Message-ID (diff)
From: Simon Horman <simon.horman@corigine.com>
To: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Cc: "Rajneesh Bhardwaj" <irenic.rajneesh@gmail.com>,
"David E Box" <david.e.box@intel.com>,
"Hans de Goede" <hdegoede@redhat.com>,
"Mark Gross" <markgross@kernel.org>,
"Jose Abreu" <Jose.Abreu@synopsys.com>,
"Andrew Lunn" <andrew@lunn.ch>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Russell King" <linux@armlinux.org.uk>,
"David S . Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Marek Behún" <kabel@kernel.org>,
"Jean Delvare" <jdelvare@suse.com>,
"Guenter Roeck" <linux@roeck-us.net>,
"Giuseppe Cavallaro" <peppe.cavallaro@st.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Jose Abreu" <joabreu@synopsys.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Richard Cochran" <richardcochran@gmail.com>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Alexei Starovoitov" <ast@kernel.org>,
"Daniel Borkmann" <daniel@iogearbox.net>,
"Jesper Dangaard Brouer" <hawk@kernel.org>,
"John Fastabend" <john.fastabend@gmail.com>,
"Wong Vee Khee" <veekhee@apple.com>,
"Jon Hunter" <jonathanh@nvidia.com>,
"Jesse Brandeburg" <jesse.brandeburg@intel.com>,
"Revanth Kumar Uppala" <ruppala@nvidia.com>,
"Shenwei Wang" <shenwei.wang@nxp.com>,
"Andrey Konovalov" <andrey.konovalov@linaro.org>,
"Jochen Henneberg" <jh@henneberg-systemdesign.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
platform-driver-x86@vger.kernel.org, linux-hwmon@vger.kernel.org,
bpf@vger.kernel.org, "Voon Wei Feng" <weifeng.voon@intel.com>,
Tan@web.codeaurora.org, "Tee Min" <tee.min.tan@linux.intel.com>,
"Michael Sit Wei Hong" <michael.wei.hong.sit@intel.com>,
"Lai Peter Jun Ann" <jun.ann.lai@intel.com>
Subject: Re: [PATCH net-next 3/6] net: phy: update in-band AN mode when changing interface by PHY driver
Date: Thu, 22 Jun 2023 16:43:51 +0200 [thread overview]
Message-ID: <ZJReJ2yxqKGQx1BU@corigine.com> (raw)
In-Reply-To: <20230622041905.629430-4-yong.liang.choong@linux.intel.com>
On Thu, Jun 22, 2023 at 12:19:02PM +0800, Choong Yong Liang wrote:
> From: "Tan, Tee Min" <tee.min.tan@linux.intel.com>
>
> Add cur_link_an_mode into phy_device struct for PHY drivers to
> communicate the in-band AN mode setting with phylink framework.
>
> As there is a mechanism in PHY drivers to switch the PHY interface
> between SGMII and 2500BaseX according to link speed. In this case,
> the in-band AN mode should be switching based on the PHY interface
> as well, if the PHY interface has been changed/updated by PHY driver.
>
> For e.g., disable in-band AN in 2500BaseX mode, or enable in-band AN
> back for SGMII mode (10/100/1000Mbps).
>
> Signed-off-by: Tan, Tee Min <tee.min.tan@linux.intel.com>
> Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
...
> diff --git a/include/linux/phy.h b/include/linux/phy.h
> index 11c1e91563d4..c685b526e307 100644
> --- a/include/linux/phy.h
> +++ b/include/linux/phy.h
> @@ -756,6 +756,8 @@ struct phy_device {
> /* MACsec management functions */
> const struct macsec_ops *macsec_ops;
> #endif
> + /* For communicate the AN mode setting with phylink framework. */
> + u8 cur_link_an_mode;
> };
Hi Choong Yong Liang,
Please consider adding cur_link_an_mode to the kernel doc
for struct phy_device - which is above the definition of struct phy_device.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-06-22 14:44 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-22 4:18 [PATCH net-next 0/6] TSN auto negotiation between 1G and 2.5G Choong Yong Liang
2023-06-22 4:18 ` Choong Yong Liang
2023-06-22 4:19 ` [PATCH net-next 1/6] platform/x86: intel_pmc_core: Add IPC mailbox accessor function and add SoC register access Choong Yong Liang
2023-06-22 4:19 ` Choong Yong Liang
2023-06-22 8:18 ` Hans de Goede
2023-06-22 8:18 ` Hans de Goede
2023-06-23 5:52 ` Choong Yong Liang
2023-06-23 5:52 ` Choong Yong Liang
2023-06-23 12:44 ` Wong Vee Khee
2023-06-23 12:44 ` Wong Vee Khee
2023-06-22 14:41 ` Simon Horman
2023-06-22 14:41 ` Simon Horman
2023-06-23 5:54 ` Choong Yong Liang
2023-06-23 5:54 ` Choong Yong Liang
2023-06-22 4:19 ` [PATCH net-next 2/6] net: pcs: xpcs: combine C37 SGMII AN and 2500BASEX for Intel mGbE controller Choong Yong Liang
2023-06-22 4:19 ` Choong Yong Liang
2023-06-22 4:19 ` [PATCH net-next 3/6] net: phy: update in-band AN mode when changing interface by PHY driver Choong Yong Liang
2023-06-22 4:19 ` Choong Yong Liang
2023-06-22 14:43 ` Simon Horman [this message]
2023-06-22 14:43 ` Simon Horman
2023-06-22 15:06 ` Russell King (Oracle)
2023-06-22 15:06 ` Russell King (Oracle)
2023-06-23 5:35 ` Simon Horman
2023-06-23 5:35 ` Simon Horman
2023-06-23 6:02 ` Choong Yong Liang
2023-06-23 6:02 ` Choong Yong Liang
2023-06-23 5:57 ` Choong Yong Liang
2023-06-23 5:57 ` Choong Yong Liang
2023-06-22 4:19 ` [PATCH net-next 4/6] net: stmmac: enable Intel mGbE 1G/2.5G auto-negotiation support Choong Yong Liang
2023-06-22 4:19 ` Choong Yong Liang
2023-06-22 4:19 ` [PATCH net-next 5/6] stmmac: intel: Separate driver_data of ADL-N from TGL Choong Yong Liang
2023-06-22 4:19 ` Choong Yong Liang
2023-06-22 4:19 ` [PATCH net-next 6/6] net: stmmac: Add 1G/2.5G auto-negotiation support for ADL-N Choong Yong Liang
2023-06-22 4:19 ` Choong Yong Liang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZJReJ2yxqKGQx1BU@corigine.com \
--to=simon.horman@corigine.com \
--cc=Jose.Abreu@synopsys.com \
--cc=Tan@web.codeaurora.org \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=andrey.konovalov@linaro.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=david.e.box@intel.com \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=hdegoede@redhat.com \
--cc=hkallweit1@gmail.com \
--cc=irenic.rajneesh@gmail.com \
--cc=jdelvare@suse.com \
--cc=jesse.brandeburg@intel.com \
--cc=jh@henneberg-systemdesign.com \
--cc=joabreu@synopsys.com \
--cc=john.fastabend@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=jun.ann.lai@intel.com \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=linux@roeck-us.net \
--cc=markgross@kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=michael.wei.hong.sit@intel.com \
--cc=netdev@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=ruppala@nvidia.com \
--cc=shenwei.wang@nxp.com \
--cc=tee.min.tan@linux.intel.com \
--cc=veekhee@apple.com \
--cc=weifeng.voon@intel.com \
--cc=yong.liang.choong@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.