Re: [PATCH 2/3] RISC-V: Add T-Head 0.7.1 vector extension to hwprobe

[Charlie Jenkins <charlie@rivosinc.com>]

On Thu, Jul 06, 2023 at 06:38:17PM +0100, Conor Dooley wrote:
> Hey,
> 
> On Wed, Jul 05, 2023 at 08:30:18PM -0700, Charlie Jenkins wrote:
> > Using vendor extensions in hwprobe, add the ability to query if the
> > 0.7.1 vector extension is available. It is determined to be available
> > only if the kernel is compiled with vector support,
> 
> > and the user is
> > using the c906.
> 
> Heh, unfortunately your patch doesn't apply this limitation.
> 
> I'm not really sure where this series is intended to sit in relation to
> Heiko's series that adds support for the actual T-Head vector stuff:
> https://lore.kernel.org/linux-riscv/20230622231305.631331-1-heiko@sntech.de/
> 
> Is this intended to complement that? If so, these patches don't really
> seem to integrate with it (and have some of the same flaws unfortunately
> as that series does).
> 
> Firstly, to my knowledge, all T-Head cpu cores report 0 for impid &
> archid. Stefan pointed out:
> 	C906 supports t-head/0.7.1 vectors as a configuration option.  The C906 in
> 	the D1 and BL808 has vectors, the recently announced CV1800B has one C906
> 	with vectors and one without, and I vaguely remember seeing a chip with only
> 	a non-vector C906.
> 	
> 	C908 (announced, no manual yet) claims V 1.0 support.  Presumably it will
> 	not support 0.7.1.
> 	
> 	C910 (exists on evaluation boards) lacks vector support.
> 	
> 	C920 (TH1520, SG2042, etc) has 0.7.1 support, at least superficially
> 	compatible with C906-with-vectors.  Hopefully we can share errata.
> 	
> 	This probably needs to be handled as an orthogonal "xtheadv" or "v0p7p1"
> 	extension in whatever replaces riscv,isa.
> 
> This makes an approach that does anything w/ their vector implementation
> not discernible based on the m*id CSRs. IMO, the only way to make this
> stuff work properly is to detect based on a DT or ACPI property whether
> this stuff is supported on a given core.
> 
> Since the approach just cannot work, I don't have any detailed comments
> to make, just a few small ones below.
>

It would be beneficial to use Heiko's vector support patch. I can look
into using that. The main purpose of this patch is to propose a method
of vendor extension support and since T-Head has hardware I have used 
their hardware as an example of how to implement vendor extensions. 
That is the reason for the kind of awkward patch segmentation.

> > Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
> > ---
> >  arch/riscv/Kconfig.vendor                       | 11 +++++++++++
> >  arch/riscv/include/asm/extensions.h             | 16 ++++++++++++++++
> >  arch/riscv/kernel/sys_riscv.c                   | 20 ++++++++++++++++++++
> >  arch/riscv/vendor_extensions/Makefile           |  2 ++
> >  arch/riscv/vendor_extensions/thead/Makefile     |  8 ++++++++
> >  arch/riscv/vendor_extensions/thead/extensions.c | 24 ++++++++++++++++++++++++
> >  6 files changed, 81 insertions(+)
> > 
> > diff --git a/arch/riscv/Kconfig.vendor b/arch/riscv/Kconfig.vendor
> > index 213ac3e6fed5..b8b9d15153eb 100644
> > --- a/arch/riscv/Kconfig.vendor
> > +++ b/arch/riscv/Kconfig.vendor
> > @@ -1,3 +1,14 @@
> >  menu "Vendor extensions selection"
> >  
> > +config VENDOR_EXTENSIONS_THEAD
> > +	bool "T-HEAD vendor extensions"
> 
> > +	depends on RISCV_ALTERNATIVE
> 
> Why do you need this?
> 
Thanks for pointing that out, I meant to remove that.
> > +	default n
> > +	help
> > +	  All T-HEAD vendor extensions Kconfig depend on this Kconfig. Disabling
> > +	  this Kconfig will disable all T-HEAD vendor extensions. Please say "Y"
> > +	  here if your platform uses T-HEAD vendor extensions.
> 
> I don't really like this Kconfig entry. We should just use the one in
> Kconfig.errata that enables the actual vector stuff.
> 
The purpose of this is to support more than just the T-Head vector
extension. The vector extension is just the vendor extension I selected
to support first. The purpose of this file is for all vendors to have
their own Kconfig entries to enable the vector extension which I didn't
feel that it properly fit into the errata.
> > +
> > +	  Otherwise, please say "N" here to avoid unnecessary overhead.
> > +
> >  endmenu # "Vendor extensions selection"
> > diff --git a/arch/riscv/include/asm/extensions.h b/arch/riscv/include/asm/extensions.h
> > new file mode 100644
> > index 000000000000..27ce294a3d65
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/extensions.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2023 by Rivos Inc.
> > + */
> > +#ifndef __ASM_EXTENSIONS_H
> > +#define __ASM_EXTENSIONS_H
> > +
> > +#include <asm/hwprobe.h>
> > +#include <linux/cpumask.h>
> > +
> > +#define THEAD_ISA_EXT0 (RISCV_HWPROBE_VENDOR_EXTENSION_SPACE)
> > +#define THEAD_ISA_EXT0_V0_7_1 (1 << 0)
> > +
> > +int hwprobe_thead(__u64 marchid, __u64 mimpid, struct riscv_hwprobe *pair,
> > +		  const struct cpumask *cpus);
> > +#endif
> > diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c
> > index 2351a5f7b8b1..58b12eaeaf46 100644
> > --- a/arch/riscv/kernel/sys_riscv.c
> > +++ b/arch/riscv/kernel/sys_riscv.c
> > @@ -13,6 +13,7 @@
> >  #include <asm/vector.h>
> >  #include <asm/switch_to.h>
> >  #include <asm/uaccess.h>
> > +#include <asm/extensions.h>
> >  #include <asm/unistd.h>
> >  #include <asm-generic/mman-common.h>
> >  #include <vdso/vsyscall.h>
> > @@ -192,6 +193,25 @@ static int hwprobe_vendor(__u64 mvendorid, struct riscv_hwprobe *pair,
> >  			 const struct cpumask *cpus)
> >  {
> >  	switch (mvendorid) {
> > +#ifdef CONFIG_VENDOR_EXTENSIONS_THEAD
> 
> Please use IS_ENABLED() in code where possible, so that we get compile
> time coverage of the code it disables. IMO, this kinda overcomplicates
> the switch anyway, and it should be as simple as:
> case THEAD_VENDOR_ID:
> 	return hwprobe_thead(pair, cpus);
> 
> and deal with the specific stuff (like impid etc) inside that function.
> 
> > +	case THEAD_VENDOR_ID:
> > +		struct riscv_hwprobe marchid = {
> > +			.key = RISCV_HWPROBE_KEY_MARCHID,
> > +			.value = 0
> > +		};
> > +		struct riscv_hwprobe mimpid = {
> > +			.key = RISCV_HWPROBE_KEY_MIMPID,
> > +			.value = 0
> > +		};
> > +
> > +		hwprobe_arch_id(&marchid, cpus);
> > +		hwprobe_arch_id(&mimpid, cpus);
> > +		if (marchid.value != -1ULL && mimpid.value != -1ULL)
> > +			hwprobe_thead(marchid.value, mimpid.value, pair, cpus);
> > +		else
> > +			return -1;
> > +		break;
> > +#endif
> >  	default:
> >  		return -1;
> >  	}
> > diff --git a/arch/riscv/vendor_extensions/Makefile b/arch/riscv/vendor_extensions/Makefile
> > index e815895e9372..38c3e80469fd 100644
> > --- a/arch/riscv/vendor_extensions/Makefile
> > +++ b/arch/riscv/vendor_extensions/Makefile
> > @@ -1,3 +1,5 @@
> >  ifdef CONFIG_RELOCATABLE
> >  KBUILD_CFLAGS += -fno-pie
> >  endif
> 
> Again, why do you need this, or...
This file is properly filled out in the next patch in the series but I
wanted to break it up. I saw this in the errata Makefiles so I assumed
it would be needed here.
> > +
> > +obj-$(CONFIG_VENDOR_EXTENSIONS_THEAD) += thead/
> > diff --git a/arch/riscv/vendor_extensions/thead/Makefile b/arch/riscv/vendor_extensions/thead/Makefile
> > new file mode 100644
> > index 000000000000..7cf43c629b66
> > --- /dev/null
> > +++ b/arch/riscv/vendor_extensions/thead/Makefile
> > @@ -0,0 +1,8 @@
> > +ifdef CONFIG_FTRACE
> > +CFLAGS_REMOVE_extensions.o = $(CC_FLAGS_FTRACE)
> > +endif
> > +ifdef CONFIG_KASAN
> > +KASAN_SANITIZE_extensions.o := n
> > +endif
> 
> ...any of this? Not saying you don't, but I think it should be explained.
> 
Same reasoning as above, I can remove it if it's not needed.
> > +
> > +obj-y += extensions.o
> > diff --git a/arch/riscv/vendor_extensions/thead/extensions.c b/arch/riscv/vendor_extensions/thead/extensions.c
> > new file mode 100644
> > index 000000000000..a177501bc99c
> > --- /dev/null
> > +++ b/arch/riscv/vendor_extensions/thead/extensions.c
> > @@ -0,0 +1,24 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2023 by Rivos Inc.
> > + */
> > +
> > +#include <asm/extensions.h>
> > +
> > +int hwprobe_thead(__u64 marchid, __u64 mimpid, struct riscv_hwprobe *pair,
> > +		  const struct cpumask *cpus)
> > +{
> > +	pair->value = 0;
> > +	switch (pair->key) {
> > +	case THEAD_ISA_EXT0:
> > +#ifdef CONFIG_RISCV_ISA_V
> 
> As pointed out by Remi, this doesn't work either.
> You should not claim this is supported, just because V is, you also need
> the support for their vector "flavour" from Heiko's series.
> 
> Plus, it should be IS_ENABLED() too.
> 
> Cheers,
> Conor.
> 
The thought process was that it should only matter if they care about
V. However since they are different versions of V I could see it being
better to not depend on the same config. 
> > +		if (marchid == 0 && mimpid == 0)
> > +			pair->value |= THEAD_ISA_EXT0_V0_7_1;
> > +#endif
> > +		break;
> > +	default:
> > +		return -1;
> > +	}
> > +
> > +	return 0;
> > +}
> > 
> > -- 
> > 2.41.0
> >