From: "Lisovskiy, Stanislav" <stanislav.lisovskiy@intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 10/20] drm/i915/dp: Add functions to get min/max src input bpc with DSC
Date: Thu, 17 Aug 2023 10:58:41 +0300 [thread overview]
Message-ID: <ZN3TMSOzcAiNddvT@intel.com> (raw)
In-Reply-To: <20230810130319.3708392-11-ankit.k.nautiyal@intel.com>
On Thu, Aug 10, 2023 at 06:33:09PM +0530, Ankit Nautiyal wrote:
> Separate out functions for getting maximum and minimum input BPC based
> on platforms, when DSC is used.
>
> v2: Use HAS_DSC macro instead of platform check while getting min input
> bpc. (Stan)
>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 35 +++++++++++++++++++------
> 1 file changed, 27 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index c13efd0b7c98..b414d09b5e80 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -1535,6 +1535,18 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
> return -EINVAL;
> }
>
> +static
> +u8 intel_dp_dsc_max_src_input_bpc(struct drm_i915_private *i915)
> +{
> + /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */
> + if (DISPLAY_VER(i915) >= 12)
> + return 12;
> + if (DISPLAY_VER(i915) == 11)
> + return 10;
> +
> + return 0;
> +}
> +
> int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
> {
> struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> @@ -1542,11 +1554,12 @@ int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
> u8 dsc_bpc[3] = {0};
> u8 dsc_max_bpc;
>
> - /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */
> - if (DISPLAY_VER(i915) >= 12)
> - dsc_max_bpc = min_t(u8, 12, max_req_bpc);
> - else
> - dsc_max_bpc = min_t(u8, 10, max_req_bpc);
> + dsc_max_bpc = intel_dp_dsc_max_src_input_bpc(i915);
> +
> + if (!dsc_max_bpc)
> + return dsc_max_bpc;
> +
> + dsc_max_bpc = min_t(u8, dsc_max_bpc, max_req_bpc);
>
> num_bpc = drm_dp_dsc_sink_supported_input_bpcs(intel_dp->dsc_dpcd,
> dsc_bpc);
> @@ -1674,6 +1687,13 @@ static bool intel_dp_dsc_supports_format(struct intel_dp *intel_dp,
> return drm_dp_dsc_sink_supports_format(intel_dp->dsc_dpcd, sink_dsc_format);
> }
>
> +static
> +u8 intel_dp_dsc_min_src_input_bpc(struct drm_i915_private *i915)
> +{
> + /* Min DSC Input BPC for ICL+ is 8 */
> + return HAS_DSC(i915) ? 8 : 0;
> +}
> +
> int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> struct intel_crtc_state *pipe_config,
> struct drm_connector_state *conn_state,
> @@ -1707,10 +1727,9 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> pipe_bpp = pipe_config->pipe_bpp;
> }
>
> - /* Min Input BPC for ICL+ is 8 */
> - if (pipe_bpp < 8 * 3) {
> + if (pipe_bpp < intel_dp_dsc_min_src_input_bpc(dev_priv) * 3) {
> drm_dbg_kms(&dev_priv->drm,
> - "No DSC support for less than 8bpc\n");
> + "Computed BPC less than min supported by source for DSC\n");
> return -EINVAL;
> }
>
> --
> 2.40.1
>
WARNING: multiple messages have this Message-ID (diff)
From: "Lisovskiy, Stanislav" <stanislav.lisovskiy@intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org, anusha.srivatsa@intel.com,
dri-devel@lists.freedesktop.org, navaremanasi@google.com
Subject: Re: [PATCH 10/20] drm/i915/dp: Add functions to get min/max src input bpc with DSC
Date: Thu, 17 Aug 2023 10:58:41 +0300 [thread overview]
Message-ID: <ZN3TMSOzcAiNddvT@intel.com> (raw)
In-Reply-To: <20230810130319.3708392-11-ankit.k.nautiyal@intel.com>
On Thu, Aug 10, 2023 at 06:33:09PM +0530, Ankit Nautiyal wrote:
> Separate out functions for getting maximum and minimum input BPC based
> on platforms, when DSC is used.
>
> v2: Use HAS_DSC macro instead of platform check while getting min input
> bpc. (Stan)
>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 35 +++++++++++++++++++------
> 1 file changed, 27 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index c13efd0b7c98..b414d09b5e80 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -1535,6 +1535,18 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
> return -EINVAL;
> }
>
> +static
> +u8 intel_dp_dsc_max_src_input_bpc(struct drm_i915_private *i915)
> +{
> + /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */
> + if (DISPLAY_VER(i915) >= 12)
> + return 12;
> + if (DISPLAY_VER(i915) == 11)
> + return 10;
> +
> + return 0;
> +}
> +
> int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
> {
> struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> @@ -1542,11 +1554,12 @@ int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
> u8 dsc_bpc[3] = {0};
> u8 dsc_max_bpc;
>
> - /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */
> - if (DISPLAY_VER(i915) >= 12)
> - dsc_max_bpc = min_t(u8, 12, max_req_bpc);
> - else
> - dsc_max_bpc = min_t(u8, 10, max_req_bpc);
> + dsc_max_bpc = intel_dp_dsc_max_src_input_bpc(i915);
> +
> + if (!dsc_max_bpc)
> + return dsc_max_bpc;
> +
> + dsc_max_bpc = min_t(u8, dsc_max_bpc, max_req_bpc);
>
> num_bpc = drm_dp_dsc_sink_supported_input_bpcs(intel_dp->dsc_dpcd,
> dsc_bpc);
> @@ -1674,6 +1687,13 @@ static bool intel_dp_dsc_supports_format(struct intel_dp *intel_dp,
> return drm_dp_dsc_sink_supports_format(intel_dp->dsc_dpcd, sink_dsc_format);
> }
>
> +static
> +u8 intel_dp_dsc_min_src_input_bpc(struct drm_i915_private *i915)
> +{
> + /* Min DSC Input BPC for ICL+ is 8 */
> + return HAS_DSC(i915) ? 8 : 0;
> +}
> +
> int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> struct intel_crtc_state *pipe_config,
> struct drm_connector_state *conn_state,
> @@ -1707,10 +1727,9 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> pipe_bpp = pipe_config->pipe_bpp;
> }
>
> - /* Min Input BPC for ICL+ is 8 */
> - if (pipe_bpp < 8 * 3) {
> + if (pipe_bpp < intel_dp_dsc_min_src_input_bpc(dev_priv) * 3) {
> drm_dbg_kms(&dev_priv->drm,
> - "No DSC support for less than 8bpc\n");
> + "Computed BPC less than min supported by source for DSC\n");
> return -EINVAL;
> }
>
> --
> 2.40.1
>
next prev parent reply other threads:[~2023-08-17 7:58 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-10 13:02 [Intel-gfx] [PATCH 00/20] DSC misc fixes Ankit Nautiyal
2023-08-10 13:02 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 01/20] drm/i915/dp: Consider output_format while computing dsc bpp Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 02/20] drm/i915/dp: Move compressed bpp check with 420 format inside the helper Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 03/20] drm/i915/dp_mst: Use output_format to get the final link bpp Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 04/20] drm/i915/dp: Use consistent name for link bpp and compressed bpp Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 05/20] drm/i915/dp: Update Bigjoiner interface bits for computing " Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 06/20] drm/i915/intel_cdclk: Add vdsc with bigjoiner constraints on min_cdlck Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 07/20] drm/i915/dp: Remove extra logs for printing DSC info Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 08/20] drm/display/dp: Fix the DP DSC Receiver cap size Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 09/20] drm/i915/dp: Avoid forcing DSC BPC for MST case Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 10/20] drm/i915/dp: Add functions to get min/max src input bpc with DSC Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-17 7:58 ` Lisovskiy, Stanislav [this message]
2023-08-17 7:58 ` Lisovskiy, Stanislav
2023-08-10 13:03 ` [Intel-gfx] [PATCH 11/20] drm/i915/dp: Check min bpc DSC limits for dsc_force_bpc also Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 12/20] drm/i915/dp: Avoid left shift of DSC output bpp by 4 Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 13/20] drm/i915/dp: Rename helper to get DSC max pipe_bpp Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 14/20] drm/i915/dp: Separate out functions for edp/DP for computing DSC bpp Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 15/20] drm/i915/dp: Add DSC BPC/BPP constraints while selecting pipe bpp with DSC Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 16/20] drm/i915/dp: Separate out function to get compressed bpp with joiner Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 17/20] drm/i915/dp: Get optimal link config to have best compressed bpp Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 18/20] drm/i915/dp: Check src/sink compressed bpp limit for edp Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 19/20] drm/i915/dp: Check if force_dsc_output_format is possible Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 13:03 ` [Intel-gfx] [PATCH 20/20] drm/i915: Query compressed bpp properly using correct DPCD and DP Spec info Ankit Nautiyal
2023-08-10 13:03 ` Ankit Nautiyal
2023-08-10 18:43 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for DSC misc fixes (rev7) Patchwork
2023-08-10 18:43 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2023-08-10 18:56 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-08-11 15:36 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2023-08-17 9:49 ` [Intel-gfx] [PATCH 00/20] DSC misc fixes Jani Nikula
2023-08-17 9:49 ` Jani Nikula
2023-08-17 13:52 ` [Intel-gfx] " Nautiyal, Ankit K
2023-08-17 13:52 ` Nautiyal, Ankit K
-- strict thread matches above, loose matches on Subject: below --
2023-07-28 4:11 [Intel-gfx] " Ankit Nautiyal
2023-07-28 4:11 ` [Intel-gfx] [PATCH 10/20] drm/i915/dp: Add functions to get min/max src input bpc with DSC Ankit Nautiyal
2023-08-02 12:05 ` Lisovskiy, Stanislav
2023-08-04 4:12 ` Nautiyal, Ankit K
2023-08-07 12:30 ` Lisovskiy, Stanislav
2023-08-08 10:08 ` Ankit Nautiyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZN3TMSOzcAiNddvT@intel.com \
--to=stanislav.lisovskiy@intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.