Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[bhe]

On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> Hi,
> 
> I am trying to bring up kdump on arm64 platform[1]. But I get "Cannot get kernel _text symbol address".
> 
> Is there some Dump-capture kernel config options that I am missing?
> 
> FYI, copied below complete kexec debug log.
> 
> [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html

Your description isn't clear. You saw the printing, then your kdump
kernel loading succeeded or not?

If no, have you tried applying Pingfan's patchset and still saw the issue?

[PATCHv7 0/5] arm64: zboot support
https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/T/#u

Thanks
Baoquan


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[bhe]

On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> Hi,
> 
> I am trying to bring up kdump on arm64 platform[1]. But I get "Cannot get kernel _text symbol address".
> 
> Is there some Dump-capture kernel config options that I am missing?
> 
> FYI, copied below complete kexec debug log.
> 
> [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html

Your description isn't clear. You saw the printing, then your kdump
kernel loading succeeded or not?

If no, have you tried applying Pingfan's patchset and still saw the issue?

[PATCHv7 0/5] arm64: zboot support
https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/T/#u

Thanks
Baoquan

RE: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Pandey, Radhey Shyam]

> -----Original Message-----
> From: bhe@redhat.com <bhe@redhat.com>
> Sent: Wednesday, August 9, 2023 7:42 AM
> To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> piliu@redhat.com
> Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> arm64 platform
> 
> On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > Hi,
> >
> > I am trying to bring up kdump on arm64 platform[1]. But I get "Cannot get
> kernel _text symbol address".
> >
> > Is there some Dump-capture kernel config options that I am missing?
> >
> > FYI, copied below complete kexec debug log.
> >
> > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> 
> Your description isn't clear. You saw the printing, then your kdump kernel
> loading succeeded or not?
> 
> If no, have you tried applying Pingfan's patchset and still saw the issue?
> 
> [PATCHv7 0/5] arm64: zboot support
> https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/T/#u

I was able to proceed further with loading with crash kernel on triggering system crash.
echo c > /proc/sysrq-trigger

But when I copy /proc/vmcore it throws memory abort. Also I see size of /proc/vmcore really huge (18446603353488633856).
Any possible guess on what could be wrong?


[   80.733523] Starting crashdump kernel...
[   80.737435] Bye!
[    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
[    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07 (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
<snip>



xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
MemTotal:        2092876 kB
MemFree:         1219928 kB
MemAvailable:    1166004 kB
Buffers:              32 kB
Cached:           756952 kB
SwapCached:            0 kB
Active:             1480 kB
Inactive:          24164 kB
Active(anon):       1452 kB
Inactive(anon):    24160 kB
xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump     
[  975.284865] Unable to handle kernel level 3 address size fault at virtual address ffff80008d7cf000
[  975.293871] Mem abort info:
[  975.296669]   ESR = 0x0000000096000003
[  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
[  975.305738]   SET = 0, FnV = 0
[  975.308788]   EA = 0, S1PTW = 0
[  975.311925]   FSC = 0x03: level 3 address size fault
[  975.316888] Data abort info:
[  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
[  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[  975.335599] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000005016ef6b000
[  975.342297] [ffff80008d7cf000] pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003, pmd=100005017b695003, pte=00687fff84000703
[  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
[  975.360392] Modules linked in:
3  975.
63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-ge28001fb4e07 #23
[  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
[  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  975.386119] pc : __memcpy+0x110/0x230
[  975.389783] lr : _copy_to_iter+0x3d8/0x4d0
[  975.393874] sp : ffff80008dc939a0
[  975.397178] x29: ffff80008dc939a0 x28: ffff05013c1bea30 x27: 0000000000001000
[  975.404309] x26: 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000
[  975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21: 0000000000001000
[  975.418570] x20: ffff000000000000 x19: 0000000000001000 x18: 0000000000000000
[  975.425699] x17: 0000000000000000 x16: 0000000000000000 x15: 0140000000000000
[  975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12: 0000fffef6831000
[  975.439958] x11: ffff80008d9cf000 x10: 0000000000000000 x9 : 0000000000000000
[  975.447088] x8 : ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001
[  975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 : 0000000000000000
[  975.461346] x2 : 0000000000001000 x1 : ffff80008d7cf000 x0 : ffff0501370e8000
[  975.468476] Call trace:
[  975.470912]  __memcpy+0x110/0x230
[  975.474221]  copy_oldmem_page+0x70/0xac
[  975.478050]  read_from_oldmem.part.0+0x120/0x188
[  975.482663]  read_vmcore+0x14c/0x238
[  975.486231]  proc_reg_read_iter+0x84/0xd8
[  975.490233]  copy_splice_read+0x160/0x288
[  975.494236]  vfs_splice_read+0xac/0x10c
[  975.498063]  splice_direct_to_actor+0xa4/0x26c
[  975.502498]  do_splice_direct+0x90/0xdc
[  975.506325]  do_sendfile+0x344/0x454
[  975.509892]  __arm64_sys_sendfile64+0x134/0x140
[  975.514415]  invoke_syscall+0x54/0x124
[  975.518157]  el0_svc_common.constprop.0+0xc4/0xe4
[  975.522854]  do_el0_svc+0x38/0x98
[  975.526162]  el0_svc+0x2c/0x84
[  975.529211]  el0t_64_sync_handler+0x100/0x12c
[  975.533562]  el0t_64_sync+0x190/0x194
[  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c) 
[  975.543302] ---[ end trace 0000000000000000 ]---
t message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):

kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP


Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):

kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c)

Segmentation fault
xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore 
-r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
-r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
-r--------    1 root     root     18446603353488633856 Nov  8 14:05 /proc/vmcore

Thanks,
Radhey

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

RE: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Pandey, Radhey Shyam]

> -----Original Message-----
> From: bhe@redhat.com <bhe@redhat.com>
> Sent: Wednesday, August 9, 2023 7:42 AM
> To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> piliu@redhat.com
> Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> arm64 platform
> 
> On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > Hi,
> >
> > I am trying to bring up kdump on arm64 platform[1]. But I get "Cannot get
> kernel _text symbol address".
> >
> > Is there some Dump-capture kernel config options that I am missing?
> >
> > FYI, copied below complete kexec debug log.
> >
> > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> 
> Your description isn't clear. You saw the printing, then your kdump kernel
> loading succeeded or not?
> 
> If no, have you tried applying Pingfan's patchset and still saw the issue?
> 
> [PATCHv7 0/5] arm64: zboot support
> https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/T/#u

I was able to proceed further with loading with crash kernel on triggering system crash.
echo c > /proc/sysrq-trigger

But when I copy /proc/vmcore it throws memory abort. Also I see size of /proc/vmcore really huge (18446603353488633856).
Any possible guess on what could be wrong?


[   80.733523] Starting crashdump kernel...
[   80.737435] Bye!
[    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
[    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07 (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
<snip>



xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
MemTotal:        2092876 kB
MemFree:         1219928 kB
MemAvailable:    1166004 kB
Buffers:              32 kB
Cached:           756952 kB
SwapCached:            0 kB
Active:             1480 kB
Inactive:          24164 kB
Active(anon):       1452 kB
Inactive(anon):    24160 kB
xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump     
[  975.284865] Unable to handle kernel level 3 address size fault at virtual address ffff80008d7cf000
[  975.293871] Mem abort info:
[  975.296669]   ESR = 0x0000000096000003
[  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
[  975.305738]   SET = 0, FnV = 0
[  975.308788]   EA = 0, S1PTW = 0
[  975.311925]   FSC = 0x03: level 3 address size fault
[  975.316888] Data abort info:
[  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
[  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[  975.335599] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000005016ef6b000
[  975.342297] [ffff80008d7cf000] pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003, pmd=100005017b695003, pte=00687fff84000703
[  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
[  975.360392] Modules linked in:
3  975.
63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-ge28001fb4e07 #23
[  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
[  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  975.386119] pc : __memcpy+0x110/0x230
[  975.389783] lr : _copy_to_iter+0x3d8/0x4d0
[  975.393874] sp : ffff80008dc939a0
[  975.397178] x29: ffff80008dc939a0 x28: ffff05013c1bea30 x27: 0000000000001000
[  975.404309] x26: 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000
[  975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21: 0000000000001000
[  975.418570] x20: ffff000000000000 x19: 0000000000001000 x18: 0000000000000000
[  975.425699] x17: 0000000000000000 x16: 0000000000000000 x15: 0140000000000000
[  975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12: 0000fffef6831000
[  975.439958] x11: ffff80008d9cf000 x10: 0000000000000000 x9 : 0000000000000000
[  975.447088] x8 : ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001
[  975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 : 0000000000000000
[  975.461346] x2 : 0000000000001000 x1 : ffff80008d7cf000 x0 : ffff0501370e8000
[  975.468476] Call trace:
[  975.470912]  __memcpy+0x110/0x230
[  975.474221]  copy_oldmem_page+0x70/0xac
[  975.478050]  read_from_oldmem.part.0+0x120/0x188
[  975.482663]  read_vmcore+0x14c/0x238
[  975.486231]  proc_reg_read_iter+0x84/0xd8
[  975.490233]  copy_splice_read+0x160/0x288
[  975.494236]  vfs_splice_read+0xac/0x10c
[  975.498063]  splice_direct_to_actor+0xa4/0x26c
[  975.502498]  do_splice_direct+0x90/0xdc
[  975.506325]  do_sendfile+0x344/0x454
[  975.509892]  __arm64_sys_sendfile64+0x134/0x140
[  975.514415]  invoke_syscall+0x54/0x124
[  975.518157]  el0_svc_common.constprop.0+0xc4/0xe4
[  975.522854]  do_el0_svc+0x38/0x98
[  975.526162]  el0_svc+0x2c/0x84
[  975.529211]  el0t_64_sync_handler+0x100/0x12c
[  975.533562]  el0t_64_sync+0x190/0x194
[  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c) 
[  975.543302] ---[ end trace 0000000000000000 ]---
t message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):

kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP


Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):

kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c)

Segmentation fault
xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore 
-r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
-r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
-r--------    1 root     root     18446603353488633856 Nov  8 14:05 /proc/vmcore

Thanks,
Radhey

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[bhe]

On 08/11/23 at 01:27pm, Pandey, Radhey Shyam wrote:
> > -----Original Message-----
> > From: bhe@redhat.com <bhe@redhat.com>
> > Sent: Wednesday, August 9, 2023 7:42 AM
> > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> > piliu@redhat.com
> > Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> > Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> > arm64 platform
> > 
> > On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > > Hi,
> > >
> > > I am trying to bring up kdump on arm64 platform[1]. But I get "Cannot get
> > kernel _text symbol address".
> > >
> > > Is there some Dump-capture kernel config options that I am missing?
> > >
> > > FYI, copied below complete kexec debug log.
> > >
> > > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> > 
> > Your description isn't clear. You saw the printing, then your kdump kernel
> > loading succeeded or not?
> > 
> > If no, have you tried applying Pingfan's patchset and still saw the issue?
> > 
> > [PATCHv7 0/5] arm64: zboot support
> > https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/T/#u
> 
> I was able to proceed further with loading with crash kernel on triggering system crash.
> echo c > /proc/sysrq-trigger
> 
> But when I copy /proc/vmcore it throws memory abort. Also I see size of /proc/vmcore really huge (18446603353488633856).

This is a better symptom description.

It's very similar with a solved issue even though the calltrace is not
completely same, can you try below patch to see if it fix your problem?

[PATCH] fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions
https://lore.kernel.org/all/20230731215021.70911-1-lstoakes@gmail.com/T/#u

> Any possible guess on what could be wrong?
> 
> 
> [   80.733523] Starting crashdump kernel...
> [   80.737435] Bye!
> [    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
> [    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07 (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
> <snip>
> 
> 
> 
> xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
> MemTotal:        2092876 kB
> MemFree:         1219928 kB
> MemAvailable:    1166004 kB
> Buffers:              32 kB
> Cached:           756952 kB
> SwapCached:            0 kB
> Active:             1480 kB
> Inactive:          24164 kB
> Active(anon):       1452 kB
> Inactive(anon):    24160 kB
> xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump     
> [  975.284865] Unable to handle kernel level 3 address size fault at virtual address ffff80008d7cf000
> [  975.293871] Mem abort info:
> [  975.296669]   ESR = 0x0000000096000003
> [  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
> [  975.305738]   SET = 0, FnV = 0
> [  975.308788]   EA = 0, S1PTW = 0
> [  975.311925]   FSC = 0x03: level 3 address size fault
> [  975.316888] Data abort info:
> [  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
> [  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> [  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> [  975.335599] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000005016ef6b000
> [  975.342297] [ffff80008d7cf000] pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003, pmd=100005017b695003, pte=00687fff84000703
> [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> [  975.360392] Modules linked in:
> 3  975.
> 63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-ge28001fb4e07 #23
> [  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
> [  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [  975.386119] pc : __memcpy+0x110/0x230
> [  975.389783] lr : _copy_to_iter+0x3d8/0x4d0
> [  975.393874] sp : ffff80008dc939a0
> [  975.397178] x29: ffff80008dc939a0 x28: ffff05013c1bea30 x27: 0000000000001000
> [  975.404309] x26: 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000
> [  975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21: 0000000000001000
> [  975.418570] x20: ffff000000000000 x19: 0000000000001000 x18: 0000000000000000
> [  975.425699] x17: 0000000000000000 x16: 0000000000000000 x15: 0140000000000000
> [  975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12: 0000fffef6831000
> [  975.439958] x11: ffff80008d9cf000 x10: 0000000000000000 x9 : 0000000000000000
> [  975.447088] x8 : ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001
> [  975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 : 0000000000000000
> [  975.461346] x2 : 0000000000001000 x1 : ffff80008d7cf000 x0 : ffff0501370e8000
> [  975.468476] Call trace:
> [  975.470912]  __memcpy+0x110/0x230
> [  975.474221]  copy_oldmem_page+0x70/0xac
> [  975.478050]  read_from_oldmem.part.0+0x120/0x188
> [  975.482663]  read_vmcore+0x14c/0x238
> [  975.486231]  proc_reg_read_iter+0x84/0xd8
> [  975.490233]  copy_splice_read+0x160/0x288
> [  975.494236]  vfs_splice_read+0xac/0x10c
> [  975.498063]  splice_direct_to_actor+0xa4/0x26c
> [  975.502498]  do_splice_direct+0x90/0xdc
> [  975.506325]  do_sendfile+0x344/0x454
> [  975.509892]  __arm64_sys_sendfile64+0x134/0x140
> [  975.514415]  invoke_syscall+0x54/0x124
> [  975.518157]  el0_svc_common.constprop.0+0xc4/0xe4
> [  975.522854]  do_el0_svc+0x38/0x98
> [  975.526162]  el0_svc+0x2c/0x84
> [  975.529211]  el0t_64_sync_handler+0x100/0x12c
> [  975.533562]  el0t_64_sync+0x190/0x194
> [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c) 
> [  975.543302] ---[ end trace 0000000000000000 ]---
> t message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> 
> kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> 
> 
> Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> 
> kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c)
> 
> Segmentation fault
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore 
> -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
> -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
> -r--------    1 root     root     18446603353488633856 Nov  8 14:05 /proc/vmcore
> 
> Thanks,
> Radhey
> 


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[bhe]

On 08/11/23 at 01:27pm, Pandey, Radhey Shyam wrote:
> > -----Original Message-----
> > From: bhe@redhat.com <bhe@redhat.com>
> > Sent: Wednesday, August 9, 2023 7:42 AM
> > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> > piliu@redhat.com
> > Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> > Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> > arm64 platform
> > 
> > On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > > Hi,
> > >
> > > I am trying to bring up kdump on arm64 platform[1]. But I get "Cannot get
> > kernel _text symbol address".
> > >
> > > Is there some Dump-capture kernel config options that I am missing?
> > >
> > > FYI, copied below complete kexec debug log.
> > >
> > > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> > 
> > Your description isn't clear. You saw the printing, then your kdump kernel
> > loading succeeded or not?
> > 
> > If no, have you tried applying Pingfan's patchset and still saw the issue?
> > 
> > [PATCHv7 0/5] arm64: zboot support
> > https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/T/#u
> 
> I was able to proceed further with loading with crash kernel on triggering system crash.
> echo c > /proc/sysrq-trigger
> 
> But when I copy /proc/vmcore it throws memory abort. Also I see size of /proc/vmcore really huge (18446603353488633856).

This is a better symptom description.

It's very similar with a solved issue even though the calltrace is not
completely same, can you try below patch to see if it fix your problem?

[PATCH] fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions
https://lore.kernel.org/all/20230731215021.70911-1-lstoakes@gmail.com/T/#u

> Any possible guess on what could be wrong?
> 
> 
> [   80.733523] Starting crashdump kernel...
> [   80.737435] Bye!
> [    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
> [    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07 (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
> <snip>
> 
> 
> 
> xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
> MemTotal:        2092876 kB
> MemFree:         1219928 kB
> MemAvailable:    1166004 kB
> Buffers:              32 kB
> Cached:           756952 kB
> SwapCached:            0 kB
> Active:             1480 kB
> Inactive:          24164 kB
> Active(anon):       1452 kB
> Inactive(anon):    24160 kB
> xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump     
> [  975.284865] Unable to handle kernel level 3 address size fault at virtual address ffff80008d7cf000
> [  975.293871] Mem abort info:
> [  975.296669]   ESR = 0x0000000096000003
> [  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
> [  975.305738]   SET = 0, FnV = 0
> [  975.308788]   EA = 0, S1PTW = 0
> [  975.311925]   FSC = 0x03: level 3 address size fault
> [  975.316888] Data abort info:
> [  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
> [  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> [  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> [  975.335599] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000005016ef6b000
> [  975.342297] [ffff80008d7cf000] pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003, pmd=100005017b695003, pte=00687fff84000703
> [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> [  975.360392] Modules linked in:
> 3  975.
> 63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-ge28001fb4e07 #23
> [  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
> [  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [  975.386119] pc : __memcpy+0x110/0x230
> [  975.389783] lr : _copy_to_iter+0x3d8/0x4d0
> [  975.393874] sp : ffff80008dc939a0
> [  975.397178] x29: ffff80008dc939a0 x28: ffff05013c1bea30 x27: 0000000000001000
> [  975.404309] x26: 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000
> [  975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21: 0000000000001000
> [  975.418570] x20: ffff000000000000 x19: 0000000000001000 x18: 0000000000000000
> [  975.425699] x17: 0000000000000000 x16: 0000000000000000 x15: 0140000000000000
> [  975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12: 0000fffef6831000
> [  975.439958] x11: ffff80008d9cf000 x10: 0000000000000000 x9 : 0000000000000000
> [  975.447088] x8 : ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001
> [  975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 : 0000000000000000
> [  975.461346] x2 : 0000000000001000 x1 : ffff80008d7cf000 x0 : ffff0501370e8000
> [  975.468476] Call trace:
> [  975.470912]  __memcpy+0x110/0x230
> [  975.474221]  copy_oldmem_page+0x70/0xac
> [  975.478050]  read_from_oldmem.part.0+0x120/0x188
> [  975.482663]  read_vmcore+0x14c/0x238
> [  975.486231]  proc_reg_read_iter+0x84/0xd8
> [  975.490233]  copy_splice_read+0x160/0x288
> [  975.494236]  vfs_splice_read+0xac/0x10c
> [  975.498063]  splice_direct_to_actor+0xa4/0x26c
> [  975.502498]  do_splice_direct+0x90/0xdc
> [  975.506325]  do_sendfile+0x344/0x454
> [  975.509892]  __arm64_sys_sendfile64+0x134/0x140
> [  975.514415]  invoke_syscall+0x54/0x124
> [  975.518157]  el0_svc_common.constprop.0+0xc4/0xe4
> [  975.522854]  do_el0_svc+0x38/0x98
> [  975.526162]  el0_svc+0x2c/0x84
> [  975.529211]  el0t_64_sync_handler+0x100/0x12c
> [  975.533562]  el0t_64_sync+0x190/0x194
> [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c) 
> [  975.543302] ---[ end trace 0000000000000000 ]---
> t message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> 
> kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> 
> 
> Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> 
> kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c)
> 
> Segmentation fault
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore 
> -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
> -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
> -r--------    1 root     root     18446603353488633856 Nov  8 14:05 /proc/vmcore
> 
> Thanks,
> Radhey
> 

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[bhe]

On 08/12/23 at 07:11am, Baoquan He wrote:
> On 08/11/23 at 01:27pm, Pandey, Radhey Shyam wrote:
> > > -----Original Message-----
> > > From: bhe@redhat.com <bhe@redhat.com>
> > > Sent: Wednesday, August 9, 2023 7:42 AM
> > > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> > > piliu@redhat.com
> > > Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> > > Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> > > arm64 platform
> > > 
> > > On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > > > Hi,
> > > >
> > > > I am trying to bring up kdump on arm64 platform[1]. But I get "Cannot get
> > > kernel _text symbol address".
> > > >
> > > > Is there some Dump-capture kernel config options that I am missing?
> > > >
> > > > FYI, copied below complete kexec debug log.
> > > >
> > > > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> > > 
> > > Your description isn't clear. You saw the printing, then your kdump kernel
> > > loading succeeded or not?
> > > 
> > > If no, have you tried applying Pingfan's patchset and still saw the issue?
> > > 
> > > [PATCHv7 0/5] arm64: zboot support
> > > https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/T/#u
> > 
> > I was able to proceed further with loading with crash kernel on triggering system crash.
> > echo c > /proc/sysrq-trigger
> > 
> > But when I copy /proc/vmcore it throws memory abort. Also I see size of /proc/vmcore really huge (18446603353488633856).
> 
> This is a better symptom description.
> 
> It's very similar with a solved issue even though the calltrace is not
> completely same, can you try below patch to see if it fix your problem?

Oops, I was wrong. Below patch is irrelevant because it's a kcore issue,
you met a vmcore issue, please ignore this. We need investigate to see
what is happening.

> 
> [PATCH] fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions
> https://lore.kernel.org/all/20230731215021.70911-1-lstoakes@gmail.com/T/#u
> 
> > Any possible guess on what could be wrong?
> > 
> > 
> > [   80.733523] Starting crashdump kernel...
> > [   80.737435] Bye!
> > [    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
> > [    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07 (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
> > <snip>
> > 
> > 
> > 
> > xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
> > MemTotal:        2092876 kB
> > MemFree:         1219928 kB
> > MemAvailable:    1166004 kB
> > Buffers:              32 kB
> > Cached:           756952 kB
> > SwapCached:            0 kB
> > Active:             1480 kB
> > Inactive:          24164 kB
> > Active(anon):       1452 kB
> > Inactive(anon):    24160 kB
> > xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump     
> > [  975.284865] Unable to handle kernel level 3 address size fault at virtual address ffff80008d7cf000
> > [  975.293871] Mem abort info:
> > [  975.296669]   ESR = 0x0000000096000003
> > [  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
> > [  975.305738]   SET = 0, FnV = 0
> > [  975.308788]   EA = 0, S1PTW = 0
> > [  975.311925]   FSC = 0x03: level 3 address size fault
> > [  975.316888] Data abort info:
> > [  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
> > [  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> > [  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> > [  975.335599] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000005016ef6b000
> > [  975.342297] [ffff80008d7cf000] pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003, pmd=100005017b695003, pte=00687fff84000703
> > [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> > [  975.360392] Modules linked in:
> > 3  975.
> > 63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-ge28001fb4e07 #23
> > [  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
> > [  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> > [  975.386119] pc : __memcpy+0x110/0x230
> > [  975.389783] lr : _copy_to_iter+0x3d8/0x4d0
> > [  975.393874] sp : ffff80008dc939a0
> > [  975.397178] x29: ffff80008dc939a0 x28: ffff05013c1bea30 x27: 0000000000001000
> > [  975.404309] x26: 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000
> > [  975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21: 0000000000001000
> > [  975.418570] x20: ffff000000000000 x19: 0000000000001000 x18: 0000000000000000
> > [  975.425699] x17: 0000000000000000 x16: 0000000000000000 x15: 0140000000000000
> > [  975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12: 0000fffef6831000
> > [  975.439958] x11: ffff80008d9cf000 x10: 0000000000000000 x9 : 0000000000000000
> > [  975.447088] x8 : ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001
> > [  975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 : 0000000000000000
> > [  975.461346] x2 : 0000000000001000 x1 : ffff80008d7cf000 x0 : ffff0501370e8000
> > [  975.468476] Call trace:
> > [  975.470912]  __memcpy+0x110/0x230
> > [  975.474221]  copy_oldmem_page+0x70/0xac
> > [  975.478050]  read_from_oldmem.part.0+0x120/0x188
> > [  975.482663]  read_vmcore+0x14c/0x238
> > [  975.486231]  proc_reg_read_iter+0x84/0xd8
> > [  975.490233]  copy_splice_read+0x160/0x288
> > [  975.494236]  vfs_splice_read+0xac/0x10c
> > [  975.498063]  splice_direct_to_actor+0xa4/0x26c
> > [  975.502498]  do_splice_direct+0x90/0xdc
> > [  975.506325]  do_sendfile+0x344/0x454
> > [  975.509892]  __arm64_sys_sendfile64+0x134/0x140
> > [  975.514415]  invoke_syscall+0x54/0x124
> > [  975.518157]  el0_svc_common.constprop.0+0xc4/0xe4
> > [  975.522854]  do_el0_svc+0x38/0x98
> > [  975.526162]  el0_svc+0x2c/0x84
> > [  975.529211]  el0t_64_sync_handler+0x100/0x12c
> > [  975.533562]  el0t_64_sync+0x190/0x194
> > [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c) 
> > [  975.543302] ---[ end trace 0000000000000000 ]---
> > t message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> > 
> > kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> > 
> > 
> > Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> > 
> > kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c)
> > 
> > Segmentation fault
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore 
> > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
> > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
> > -r--------    1 root     root     18446603353488633856 Nov  8 14:05 /proc/vmcore
> > 
> > Thanks,
> > Radhey
> > 
> 


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[bhe]

On 08/12/23 at 07:11am, Baoquan He wrote:
> On 08/11/23 at 01:27pm, Pandey, Radhey Shyam wrote:
> > > -----Original Message-----
> > > From: bhe@redhat.com <bhe@redhat.com>
> > > Sent: Wednesday, August 9, 2023 7:42 AM
> > > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> > > piliu@redhat.com
> > > Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> > > Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> > > arm64 platform
> > > 
> > > On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > > > Hi,
> > > >
> > > > I am trying to bring up kdump on arm64 platform[1]. But I get "Cannot get
> > > kernel _text symbol address".
> > > >
> > > > Is there some Dump-capture kernel config options that I am missing?
> > > >
> > > > FYI, copied below complete kexec debug log.
> > > >
> > > > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> > > 
> > > Your description isn't clear. You saw the printing, then your kdump kernel
> > > loading succeeded or not?
> > > 
> > > If no, have you tried applying Pingfan's patchset and still saw the issue?
> > > 
> > > [PATCHv7 0/5] arm64: zboot support
> > > https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/T/#u
> > 
> > I was able to proceed further with loading with crash kernel on triggering system crash.
> > echo c > /proc/sysrq-trigger
> > 
> > But when I copy /proc/vmcore it throws memory abort. Also I see size of /proc/vmcore really huge (18446603353488633856).
> 
> This is a better symptom description.
> 
> It's very similar with a solved issue even though the calltrace is not
> completely same, can you try below patch to see if it fix your problem?

Oops, I was wrong. Below patch is irrelevant because it's a kcore issue,
you met a vmcore issue, please ignore this. We need investigate to see
what is happening.

> 
> [PATCH] fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions
> https://lore.kernel.org/all/20230731215021.70911-1-lstoakes@gmail.com/T/#u
> 
> > Any possible guess on what could be wrong?
> > 
> > 
> > [   80.733523] Starting crashdump kernel...
> > [   80.737435] Bye!
> > [    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
> > [    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07 (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
> > <snip>
> > 
> > 
> > 
> > xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
> > MemTotal:        2092876 kB
> > MemFree:         1219928 kB
> > MemAvailable:    1166004 kB
> > Buffers:              32 kB
> > Cached:           756952 kB
> > SwapCached:            0 kB
> > Active:             1480 kB
> > Inactive:          24164 kB
> > Active(anon):       1452 kB
> > Inactive(anon):    24160 kB
> > xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump     
> > [  975.284865] Unable to handle kernel level 3 address size fault at virtual address ffff80008d7cf000
> > [  975.293871] Mem abort info:
> > [  975.296669]   ESR = 0x0000000096000003
> > [  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
> > [  975.305738]   SET = 0, FnV = 0
> > [  975.308788]   EA = 0, S1PTW = 0
> > [  975.311925]   FSC = 0x03: level 3 address size fault
> > [  975.316888] Data abort info:
> > [  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
> > [  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> > [  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> > [  975.335599] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000005016ef6b000
> > [  975.342297] [ffff80008d7cf000] pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003, pmd=100005017b695003, pte=00687fff84000703
> > [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> > [  975.360392] Modules linked in:
> > 3  975.
> > 63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-ge28001fb4e07 #23
> > [  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
> > [  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> > [  975.386119] pc : __memcpy+0x110/0x230
> > [  975.389783] lr : _copy_to_iter+0x3d8/0x4d0
> > [  975.393874] sp : ffff80008dc939a0
> > [  975.397178] x29: ffff80008dc939a0 x28: ffff05013c1bea30 x27: 0000000000001000
> > [  975.404309] x26: 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000
> > [  975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21: 0000000000001000
> > [  975.418570] x20: ffff000000000000 x19: 0000000000001000 x18: 0000000000000000
> > [  975.425699] x17: 0000000000000000 x16: 0000000000000000 x15: 0140000000000000
> > [  975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12: 0000fffef6831000
> > [  975.439958] x11: ffff80008d9cf000 x10: 0000000000000000 x9 : 0000000000000000
> > [  975.447088] x8 : ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001
> > [  975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 : 0000000000000000
> > [  975.461346] x2 : 0000000000001000 x1 : ffff80008d7cf000 x0 : ffff0501370e8000
> > [  975.468476] Call trace:
> > [  975.470912]  __memcpy+0x110/0x230
> > [  975.474221]  copy_oldmem_page+0x70/0xac
> > [  975.478050]  read_from_oldmem.part.0+0x120/0x188
> > [  975.482663]  read_vmcore+0x14c/0x238
> > [  975.486231]  proc_reg_read_iter+0x84/0xd8
> > [  975.490233]  copy_splice_read+0x160/0x288
> > [  975.494236]  vfs_splice_read+0xac/0x10c
> > [  975.498063]  splice_direct_to_actor+0xa4/0x26c
> > [  975.502498]  do_splice_direct+0x90/0xdc
> > [  975.506325]  do_sendfile+0x344/0x454
> > [  975.509892]  __arm64_sys_sendfile64+0x134/0x140
> > [  975.514415]  invoke_syscall+0x54/0x124
> > [  975.518157]  el0_svc_common.constprop.0+0xc4/0xe4
> > [  975.522854]  do_el0_svc+0x38/0x98
> > [  975.526162]  el0_svc+0x2c/0x84
> > [  975.529211]  el0t_64_sync_handler+0x100/0x12c
> > [  975.533562]  el0t_64_sync+0x190/0x194
> > [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c) 
> > [  975.543302] ---[ end trace 0000000000000000 ]---
> > t message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> > 
> > kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> > 
> > 
> > Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> > 
> > kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c)
> > 
> > Segmentation fault
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore 
> > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
> > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
> > -r--------    1 root     root     18446603353488633856 Nov  8 14:05 /proc/vmcore
> > 
> > Thanks,
> > Radhey
> > 
> 

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[bhe]

On 08/11/23 at 01:27pm, Pandey, Radhey Shyam wrote:
> > -----Original Message-----
> > From: bhe@redhat.com <bhe@redhat.com>
> > Sent: Wednesday, August 9, 2023 7:42 AM
> > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> > piliu@redhat.com
> > Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> > Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> > arm64 platform
> > 
> > On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > > Hi,
> > >
> > > I am trying to bring up kdump on arm64 platform[1]. But I get "Cannot get
> > kernel _text symbol address".
> > >
> > > Is there some Dump-capture kernel config options that I am missing?
> > >
> > > FYI, copied below complete kexec debug log.
> > >
> > > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> > 
> > Your description isn't clear. You saw the printing, then your kdump kernel
> > loading succeeded or not?
> > 
> > If no, have you tried applying Pingfan's patchset and still saw the issue?
> > 
> > [PATCHv7 0/5] arm64: zboot support
> > https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/T/#u
> 
> I was able to proceed further with loading with crash kernel on triggering system crash.
> echo c > /proc/sysrq-trigger
> 
> But when I copy /proc/vmcore it throws memory abort. Also I see size of /proc/vmcore really huge (18446603353488633856).
> Any possible guess on what could be wrong?

I didn't reproduce this issue on a arm64 baremetal system with the
latest kernel. From the log, It could be the iov_iter convertion
patch which caused this. Can you revert below patch to see if it works?

5d8de293c224 vmcore: convert copy_oldmem_page() to take an iov_iter

> 
> 
> [   80.733523] Starting crashdump kernel...
> [   80.737435] Bye!
> [    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
> [    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07 (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
> <snip>
> 
> 
> 
> xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
> MemTotal:        2092876 kB
> MemFree:         1219928 kB
> MemAvailable:    1166004 kB
> Buffers:              32 kB
> Cached:           756952 kB
> SwapCached:            0 kB
> Active:             1480 kB
> Inactive:          24164 kB
> Active(anon):       1452 kB
> Inactive(anon):    24160 kB
> xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump     
> [  975.284865] Unable to handle kernel level 3 address size fault at virtual address ffff80008d7cf000
> [  975.293871] Mem abort info:
> [  975.296669]   ESR = 0x0000000096000003
> [  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
> [  975.305738]   SET = 0, FnV = 0
> [  975.308788]   EA = 0, S1PTW = 0
> [  975.311925]   FSC = 0x03: level 3 address size fault
> [  975.316888] Data abort info:
> [  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
> [  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> [  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> [  975.335599] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000005016ef6b000
> [  975.342297] [ffff80008d7cf000] pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003, pmd=100005017b695003, pte=00687fff84000703
> [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> [  975.360392] Modules linked in:
> 3  975.
> 63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-ge28001fb4e07 #23
> [  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
> [  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [  975.386119] pc : __memcpy+0x110/0x230
> [  975.389783] lr : _copy_to_iter+0x3d8/0x4d0
> [  975.393874] sp : ffff80008dc939a0
> [  975.397178] x29: ffff80008dc939a0 x28: ffff05013c1bea30 x27: 0000000000001000
> [  975.404309] x26: 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000
> [  975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21: 0000000000001000
> [  975.418570] x20: ffff000000000000 x19: 0000000000001000 x18: 0000000000000000
> [  975.425699] x17: 0000000000000000 x16: 0000000000000000 x15: 0140000000000000
> [  975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12: 0000fffef6831000
> [  975.439958] x11: ffff80008d9cf000 x10: 0000000000000000 x9 : 0000000000000000
> [  975.447088] x8 : ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001
> [  975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 : 0000000000000000
> [  975.461346] x2 : 0000000000001000 x1 : ffff80008d7cf000 x0 : ffff0501370e8000
> [  975.468476] Call trace:
> [  975.470912]  __memcpy+0x110/0x230
> [  975.474221]  copy_oldmem_page+0x70/0xac
> [  975.478050]  read_from_oldmem.part.0+0x120/0x188
> [  975.482663]  read_vmcore+0x14c/0x238
> [  975.486231]  proc_reg_read_iter+0x84/0xd8
> [  975.490233]  copy_splice_read+0x160/0x288
> [  975.494236]  vfs_splice_read+0xac/0x10c
> [  975.498063]  splice_direct_to_actor+0xa4/0x26c
> [  975.502498]  do_splice_direct+0x90/0xdc
> [  975.506325]  do_sendfile+0x344/0x454
> [  975.509892]  __arm64_sys_sendfile64+0x134/0x140
> [  975.514415]  invoke_syscall+0x54/0x124
> [  975.518157]  el0_svc_common.constprop.0+0xc4/0xe4
> [  975.522854]  do_el0_svc+0x38/0x98
> [  975.526162]  el0_svc+0x2c/0x84
> [  975.529211]  el0t_64_sync_handler+0x100/0x12c
> [  975.533562]  el0t_64_sync+0x190/0x194
> [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c) 
> [  975.543302] ---[ end trace 0000000000000000 ]---
> t message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> 
> kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> 
> 
> Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> 
> kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c)
> 
> Segmentation fault
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore 
> -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
> -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
> -r--------    1 root     root     18446603353488633856 Nov  8 14:05 /proc/vmcore
> 
> Thanks,
> Radhey
> 


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[bhe]

On 08/11/23 at 01:27pm, Pandey, Radhey Shyam wrote:
> > -----Original Message-----
> > From: bhe@redhat.com <bhe@redhat.com>
> > Sent: Wednesday, August 9, 2023 7:42 AM
> > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> > piliu@redhat.com
> > Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> > Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> > arm64 platform
> > 
> > On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > > Hi,
> > >
> > > I am trying to bring up kdump on arm64 platform[1]. But I get "Cannot get
> > kernel _text symbol address".
> > >
> > > Is there some Dump-capture kernel config options that I am missing?
> > >
> > > FYI, copied below complete kexec debug log.
> > >
> > > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> > 
> > Your description isn't clear. You saw the printing, then your kdump kernel
> > loading succeeded or not?
> > 
> > If no, have you tried applying Pingfan's patchset and still saw the issue?
> > 
> > [PATCHv7 0/5] arm64: zboot support
> > https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/T/#u
> 
> I was able to proceed further with loading with crash kernel on triggering system crash.
> echo c > /proc/sysrq-trigger
> 
> But when I copy /proc/vmcore it throws memory abort. Also I see size of /proc/vmcore really huge (18446603353488633856).
> Any possible guess on what could be wrong?

I didn't reproduce this issue on a arm64 baremetal system with the
latest kernel. From the log, It could be the iov_iter convertion
patch which caused this. Can you revert below patch to see if it works?

5d8de293c224 vmcore: convert copy_oldmem_page() to take an iov_iter

> 
> 
> [   80.733523] Starting crashdump kernel...
> [   80.737435] Bye!
> [    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
> [    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07 (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
> <snip>
> 
> 
> 
> xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
> MemTotal:        2092876 kB
> MemFree:         1219928 kB
> MemAvailable:    1166004 kB
> Buffers:              32 kB
> Cached:           756952 kB
> SwapCached:            0 kB
> Active:             1480 kB
> Inactive:          24164 kB
> Active(anon):       1452 kB
> Inactive(anon):    24160 kB
> xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump     
> [  975.284865] Unable to handle kernel level 3 address size fault at virtual address ffff80008d7cf000
> [  975.293871] Mem abort info:
> [  975.296669]   ESR = 0x0000000096000003
> [  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
> [  975.305738]   SET = 0, FnV = 0
> [  975.308788]   EA = 0, S1PTW = 0
> [  975.311925]   FSC = 0x03: level 3 address size fault
> [  975.316888] Data abort info:
> [  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
> [  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> [  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> [  975.335599] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000005016ef6b000
> [  975.342297] [ffff80008d7cf000] pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003, pmd=100005017b695003, pte=00687fff84000703
> [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> [  975.360392] Modules linked in:
> 3  975.
> 63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-ge28001fb4e07 #23
> [  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
> [  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [  975.386119] pc : __memcpy+0x110/0x230
> [  975.389783] lr : _copy_to_iter+0x3d8/0x4d0
> [  975.393874] sp : ffff80008dc939a0
> [  975.397178] x29: ffff80008dc939a0 x28: ffff05013c1bea30 x27: 0000000000001000
> [  975.404309] x26: 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000
> [  975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21: 0000000000001000
> [  975.418570] x20: ffff000000000000 x19: 0000000000001000 x18: 0000000000000000
> [  975.425699] x17: 0000000000000000 x16: 0000000000000000 x15: 0140000000000000
> [  975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12: 0000fffef6831000
> [  975.439958] x11: ffff80008d9cf000 x10: 0000000000000000 x9 : 0000000000000000
> [  975.447088] x8 : ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001
> [  975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 : 0000000000000000
> [  975.461346] x2 : 0000000000001000 x1 : ffff80008d7cf000 x0 : ffff0501370e8000
> [  975.468476] Call trace:
> [  975.470912]  __memcpy+0x110/0x230
> [  975.474221]  copy_oldmem_page+0x70/0xac
> [  975.478050]  read_from_oldmem.part.0+0x120/0x188
> [  975.482663]  read_vmcore+0x14c/0x238
> [  975.486231]  proc_reg_read_iter+0x84/0xd8
> [  975.490233]  copy_splice_read+0x160/0x288
> [  975.494236]  vfs_splice_read+0xac/0x10c
> [  975.498063]  splice_direct_to_actor+0xa4/0x26c
> [  975.502498]  do_splice_direct+0x90/0xdc
> [  975.506325]  do_sendfile+0x344/0x454
> [  975.509892]  __arm64_sys_sendfile64+0x134/0x140
> [  975.514415]  invoke_syscall+0x54/0x124
> [  975.518157]  el0_svc_common.constprop.0+0xc4/0xe4
> [  975.522854]  do_el0_svc+0x38/0x98
> [  975.526162]  el0_svc+0x2c/0x84
> [  975.529211]  el0t_64_sync_handler+0x100/0x12c
> [  975.533562]  el0t_64_sync+0x190/0x194
> [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c) 
> [  975.543302] ---[ end trace 0000000000000000 ]---
> t message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> 
> kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003 [#4] SMP
> 
> 
> Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> 
> kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3 (a940342c)
> 
> Segmentation fault
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore 
> -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
> -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
> -r--------    1 root     root     18446603353488633856 Nov  8 14:05 /proc/vmcore
> 
> Thanks,
> Radhey
> 

RE: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Pandey, Radhey Shyam]

> -----Original Message-----
> From: bhe@redhat.com <bhe@redhat.com>
> Sent: Monday, August 14, 2023 6:08 PM
> To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> Cc: piliu@redhat.com; kexec@lists.infradead.org; linux-
> kernel@vger.kernel.org; Sarangi, Anirudha <anirudha.sarangi@amd.com>
> Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> arm64 platform
> 
> On 08/11/23 at 01:27pm, Pandey, Radhey Shyam wrote:
> > > -----Original Message-----
> > > From: bhe@redhat.com <bhe@redhat.com>
> > > Sent: Wednesday, August 9, 2023 7:42 AM
> > > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> > > piliu@redhat.com
> > > Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> > > Subject: Re: kexec reports "Cannot get kernel _text symbol address"
> > > on
> > > arm64 platform
> > >
> > > On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > > > Hi,
> > > >
> > > > I am trying to bring up kdump on arm64 platform[1]. But I get
> > > > "Cannot get
> > > kernel _text symbol address".
> > > >
> > > > Is there some Dump-capture kernel config options that I am missing?
> > > >
> > > > FYI, copied below complete kexec debug log.
> > > >
> > > > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> > >
> > > Your description isn't clear. You saw the printing, then your kdump
> > > kernel loading succeeded or not?
> > >
> > > If no, have you tried applying Pingfan's patchset and still saw the issue?
> > >
> > > [PATCHv7 0/5] arm64: zboot support
> > > https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/
> > > T/#u
> >
> > I was able to proceed further with loading with crash kernel on triggering
> system crash.
> > echo c > /proc/sysrq-trigger
> >
> > But when I copy /proc/vmcore it throws memory abort. Also I see size of
> /proc/vmcore really huge (18446603353488633856).
> > Any possible guess on what could be wrong?
> 
> I didn't reproduce this issue on a arm64 baremetal system with the latest
> kernel. From the log, It could be the iov_iter convertion patch which caused
> this. Can you revert below patch to see if it works?
> 
> 5d8de293c224 vmcore: convert copy_oldmem_page() to take an iov_iter

Revert of this commit resulted in lot of conflicts. So as a safer side I checkout
v5.18 kernel version before above commit. Still I see the same issue.

/ # ls -lrth /proc/vmcore 
-r--------    1 root     root       16.0E Aug 21 12:16 /proc/vmcore
/ # dmesg | grep -i 5.18
[    0.000000] Linux version 5.18.0-00001-g689fdf110e63-dirty (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #37 SMP Mon Aug 21 17:38:24 IST 2023
[    2.494578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    2.514941] usb usb1: Manufacturer: Linux 5.18.0-00001-g689fdf110e63-dirty xhci-hcd
[    2.555265] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    2.575621] usb usb2: Manufacturer: Linux 5.18.0-00001-g689fdf110e63-dirty xhci-hcd
[    3.152182] usb 1-1: new high-speed USB device number 2 using xhci-hcd
/ # cp /proc/vmcore dump
[   86.204704] Unable to handle kernel level 3 address size fault at virtual address ffff800009b75000
[   86.213677] Mem abort info:
[   86.216464]   ESR = 0x96000003
[   86.219508]   EC = 0x25: DABT (current EL), IL = 32 bits
[   86.224812]   SET = 0, FnV = 0
[   86.227856]   EA = 0, S1PTW = 0
[   86.230989]   FSC = 0x03: level 3 address size fault
[   86.235945] Data abort info:
[   86.238819]   ISV = 0, ISS = 0x00000003
[   86.242646]   CM = 0, WnR = 0
[   86.245608] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000043049000
[   86.252304] [ffff800009b75000] pgd=1000000061ffe003, p4d=1000000061ffe003, pud=1000000061ffd003, pmd=1000000043c12003, pte=00687ffff8200703
[   86.264828] Internal error: Oops: 96000003 [#1] SMP
[   86.269696] Modules linked in:
[   86.272741] CPU: 1 PID: 298 Comm: cp Not tainted 5.18.0-00001-g689fdf110e63-dirty #37
[   86.280562] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
[   86.286905] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   86.293857] pc : __arch_copy_to_user+0x180/0x240
[   86.298475] lr : copy_oldmem_page+0xa8/0x110
[   86.302738] sp : ffff80000af6bc50
[   86.306041] x29: ffff80000af6bc50 x28: ffff8000097de3b0 x27: ffff8000097de228
[   86.313170] x26: 0000000000000000 x25: ffff80000af6bd60 x24: 0000000000000000
[   86.320299] x23: ffff800009b75000 x22: 0000000000000001 x21: 0000ffffffa1e5a8
[   86.327427] x20: 0000000000000000 x19: 0000000000001000 x18: 0000000000000000
[   86.334555] x17: 0000000000000000 x16: 0000000000000000 x15: ffff800009b75000
[   86.341682] x14: ffff800009863568 x13: 0000000000000000 x12: ffff800008000000
[   86.348810] x11: 00007ffff8201000 x10: ffff800009b75fff x9 : 0000000000000000
[   86.355937] x8 : ffff800009b76000 x7 : 0400000000000001 x6 : 0000ffffffa1e5a8
[   86.363065] x5 : 0000ffffffa1f5a8 x4 : 0000000000000000 x3 : 0000ffffffffffff
[   86.370192] x2 : 0000000000000f80 x1 : ffff800009b75000 x0 : 0000ffffffa1e5a8
[   86.377320] Call trace:
[   86.379755]  __arch_copy_to_user+0x180/0x240
[   86.384018]  read_from_oldmem.part.0+0x160/0x1f4
[   86.388629]  read_vmcore+0xe4/0x214
[   86.392109]  proc_reg_read+0xb0/0x100
[   86.395763]  vfs_read+0x90/0x1dc
[   86.398981]  ksys_read+0x70/0x10c
[   86.402286]  __arm64_sys_read+0x20/0x30
[   86.406111]  invoke_syscall+0x54/0x124
[   86.409852]  el0_svc_common.constprop.0+0x44/0xec
[   86.414547]  do_el0_svc+0x70/0x90
[   86.417853]  el0_svc+0x50/0xa4
[   86.420899]  el0t_64_sync_handler+0x10c/0x140
[   86.425247]  el0t_64_sync+0x18c/0x190
[   86.428902] Code: d503201f d503201f d503201f d503201f (a8c12027) 
[   86.434984] ---[ end trace 0000000000000000 ]---
Segmentation fault


> 
> >
> >
> > [   80.733523] Starting crashdump kernel...
> > [   80.737435] Bye!
> > [    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
> > [    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07
> (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld
> (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
> > <snip>
> >
> >
> >
> > xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
> > MemTotal:        2092876 kB
> > MemFree:         1219928 kB
> > MemAvailable:    1166004 kB
> > Buffers:              32 kB
> > Cached:           756952 kB
> > SwapCached:            0 kB
> > Active:             1480 kB
> > Inactive:          24164 kB
> > Active(anon):       1452 kB
> > Inactive(anon):    24160 kB
> > xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump
> > [  975.284865] Unable to handle kernel level 3 address size fault at
> > virtual address ffff80008d7cf000 [  975.293871] Mem abort info:
> > [  975.296669]   ESR = 0x0000000096000003
> > [  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
> > [  975.305738]   SET = 0, FnV = 0
> > [  975.308788]   EA = 0, S1PTW = 0
> > [  975.311925]   FSC = 0x03: level 3 address size fault
> > [  975.316888] Data abort info:
> > [  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
> > [  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> > [  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> > [  975.335599] swapper pgtable: 4k pages, 48-bit VAs,
> > pgdp=000005016ef6b000 [  975.342297] [ffff80008d7cf000]
> > pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003,
> > pmd=100005017b695003, pte=00687fff84000703 [  975.354827] Internal
> error: Oops: 0000000096000003 [#4] SMP [  975.360392] Modules linked in:
> > 3  975.
> > 63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-
> ge28001fb4e07 #23
> > [  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA
> > (DT) [  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT
> > -SSBS BTYPE=--) [  975.386119] pc : __memcpy+0x110/0x230 [
> > 975.389783] lr : _copy_to_iter+0x3d8/0x4d0 [  975.393874] sp :
> > ffff80008dc939a0 [  975.397178] x29: ffff80008dc939a0 x28:
> > ffff05013c1bea30 x27: 0000000000001000 [  975.404309] x26:
> > 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000 [
> > 975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21:
> > 0000000000001000 [  975.418570] x20: ffff000000000000 x19:
> > 0000000000001000 x18: 0000000000000000 [  975.425699] x17:
> > 0000000000000000 x16: 0000000000000000 x15: 0140000000000000 [
> > 975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12:
> > 0000fffef6831000 [  975.439958] x11: ffff80008d9cf000 x10:
> > 0000000000000000 x9 : 0000000000000000 [  975.447088] x8 :
> > ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001 [
> > 975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 :
> 0000000000000000 [  975.461346] x2 : 0000000000001000 x1 :
> ffff80008d7cf000 x0 : ffff0501370e8000 [  975.468476] Call trace:
> > [  975.470912]  __memcpy+0x110/0x230
> > [  975.474221]  copy_oldmem_page+0x70/0xac [  975.478050]
> > read_from_oldmem.part.0+0x120/0x188
> > [  975.482663]  read_vmcore+0x14c/0x238 [  975.486231]
> > proc_reg_read_iter+0x84/0xd8 [  975.490233]
> > copy_splice_read+0x160/0x288 [  975.494236]
> > vfs_splice_read+0xac/0x10c [  975.498063]
> > splice_direct_to_actor+0xa4/0x26c [  975.502498]
> > do_splice_direct+0x90/0xdc [  975.506325]  do_sendfile+0x344/0x454 [
> > 975.509892]  __arm64_sys_sendfile64+0x134/0x140
> > [  975.514415]  invoke_syscall+0x54/0x124 [  975.518157]
> > el0_svc_common.constprop.0+0xc4/0xe4
> > [  975.522854]  do_el0_svc+0x38/0x98
> > [  975.526162]  el0_svc+0x2c/0x84
> > [  975.529211]  el0t_64_sync_handler+0x100/0x12c [  975.533562]
> > el0t_64_sync+0x190/0x194 [  975.537218] Code: cb01000e b4fffc2e
> > eb0201df 540004a3 (a940342c) [  975.543302] ---[ end trace
> > 0000000000000000 ]--- t message from
> > systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> >
> > kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003
> > [#4] SMP
> >
> >
> > Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue
> 2022-11-08 14:16:20 UTC):
> >
> > kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3
> > (a940342c)
> >
> > Segmentation fault
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore
> > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
> > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
> > -r--------    1 root     root     18446603353488633856 Nov  8 14:05
> /proc/vmcore
> >
> > Thanks,
> > Radhey
> >


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

RE: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Pandey, Radhey Shyam]

> -----Original Message-----
> From: bhe@redhat.com <bhe@redhat.com>
> Sent: Monday, August 14, 2023 6:08 PM
> To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> Cc: piliu@redhat.com; kexec@lists.infradead.org; linux-
> kernel@vger.kernel.org; Sarangi, Anirudha <anirudha.sarangi@amd.com>
> Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> arm64 platform
> 
> On 08/11/23 at 01:27pm, Pandey, Radhey Shyam wrote:
> > > -----Original Message-----
> > > From: bhe@redhat.com <bhe@redhat.com>
> > > Sent: Wednesday, August 9, 2023 7:42 AM
> > > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> > > piliu@redhat.com
> > > Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> > > Subject: Re: kexec reports "Cannot get kernel _text symbol address"
> > > on
> > > arm64 platform
> > >
> > > On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > > > Hi,
> > > >
> > > > I am trying to bring up kdump on arm64 platform[1]. But I get
> > > > "Cannot get
> > > kernel _text symbol address".
> > > >
> > > > Is there some Dump-capture kernel config options that I am missing?
> > > >
> > > > FYI, copied below complete kexec debug log.
> > > >
> > > > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> > >
> > > Your description isn't clear. You saw the printing, then your kdump
> > > kernel loading succeeded or not?
> > >
> > > If no, have you tried applying Pingfan's patchset and still saw the issue?
> > >
> > > [PATCHv7 0/5] arm64: zboot support
> > > https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/
> > > T/#u
> >
> > I was able to proceed further with loading with crash kernel on triggering
> system crash.
> > echo c > /proc/sysrq-trigger
> >
> > But when I copy /proc/vmcore it throws memory abort. Also I see size of
> /proc/vmcore really huge (18446603353488633856).
> > Any possible guess on what could be wrong?
> 
> I didn't reproduce this issue on a arm64 baremetal system with the latest
> kernel. From the log, It could be the iov_iter convertion patch which caused
> this. Can you revert below patch to see if it works?
> 
> 5d8de293c224 vmcore: convert copy_oldmem_page() to take an iov_iter

Revert of this commit resulted in lot of conflicts. So as a safer side I checkout
v5.18 kernel version before above commit. Still I see the same issue.

/ # ls -lrth /proc/vmcore 
-r--------    1 root     root       16.0E Aug 21 12:16 /proc/vmcore
/ # dmesg | grep -i 5.18
[    0.000000] Linux version 5.18.0-00001-g689fdf110e63-dirty (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #37 SMP Mon Aug 21 17:38:24 IST 2023
[    2.494578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
[    2.514941] usb usb1: Manufacturer: Linux 5.18.0-00001-g689fdf110e63-dirty xhci-hcd
[    2.555265] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
[    2.575621] usb usb2: Manufacturer: Linux 5.18.0-00001-g689fdf110e63-dirty xhci-hcd
[    3.152182] usb 1-1: new high-speed USB device number 2 using xhci-hcd
/ # cp /proc/vmcore dump
[   86.204704] Unable to handle kernel level 3 address size fault at virtual address ffff800009b75000
[   86.213677] Mem abort info:
[   86.216464]   ESR = 0x96000003
[   86.219508]   EC = 0x25: DABT (current EL), IL = 32 bits
[   86.224812]   SET = 0, FnV = 0
[   86.227856]   EA = 0, S1PTW = 0
[   86.230989]   FSC = 0x03: level 3 address size fault
[   86.235945] Data abort info:
[   86.238819]   ISV = 0, ISS = 0x00000003
[   86.242646]   CM = 0, WnR = 0
[   86.245608] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000043049000
[   86.252304] [ffff800009b75000] pgd=1000000061ffe003, p4d=1000000061ffe003, pud=1000000061ffd003, pmd=1000000043c12003, pte=00687ffff8200703
[   86.264828] Internal error: Oops: 96000003 [#1] SMP
[   86.269696] Modules linked in:
[   86.272741] CPU: 1 PID: 298 Comm: cp Not tainted 5.18.0-00001-g689fdf110e63-dirty #37
[   86.280562] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
[   86.286905] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   86.293857] pc : __arch_copy_to_user+0x180/0x240
[   86.298475] lr : copy_oldmem_page+0xa8/0x110
[   86.302738] sp : ffff80000af6bc50
[   86.306041] x29: ffff80000af6bc50 x28: ffff8000097de3b0 x27: ffff8000097de228
[   86.313170] x26: 0000000000000000 x25: ffff80000af6bd60 x24: 0000000000000000
[   86.320299] x23: ffff800009b75000 x22: 0000000000000001 x21: 0000ffffffa1e5a8
[   86.327427] x20: 0000000000000000 x19: 0000000000001000 x18: 0000000000000000
[   86.334555] x17: 0000000000000000 x16: 0000000000000000 x15: ffff800009b75000
[   86.341682] x14: ffff800009863568 x13: 0000000000000000 x12: ffff800008000000
[   86.348810] x11: 00007ffff8201000 x10: ffff800009b75fff x9 : 0000000000000000
[   86.355937] x8 : ffff800009b76000 x7 : 0400000000000001 x6 : 0000ffffffa1e5a8
[   86.363065] x5 : 0000ffffffa1f5a8 x4 : 0000000000000000 x3 : 0000ffffffffffff
[   86.370192] x2 : 0000000000000f80 x1 : ffff800009b75000 x0 : 0000ffffffa1e5a8
[   86.377320] Call trace:
[   86.379755]  __arch_copy_to_user+0x180/0x240
[   86.384018]  read_from_oldmem.part.0+0x160/0x1f4
[   86.388629]  read_vmcore+0xe4/0x214
[   86.392109]  proc_reg_read+0xb0/0x100
[   86.395763]  vfs_read+0x90/0x1dc
[   86.398981]  ksys_read+0x70/0x10c
[   86.402286]  __arm64_sys_read+0x20/0x30
[   86.406111]  invoke_syscall+0x54/0x124
[   86.409852]  el0_svc_common.constprop.0+0x44/0xec
[   86.414547]  do_el0_svc+0x70/0x90
[   86.417853]  el0_svc+0x50/0xa4
[   86.420899]  el0t_64_sync_handler+0x10c/0x140
[   86.425247]  el0t_64_sync+0x18c/0x190
[   86.428902] Code: d503201f d503201f d503201f d503201f (a8c12027) 
[   86.434984] ---[ end trace 0000000000000000 ]---
Segmentation fault


> 
> >
> >
> > [   80.733523] Starting crashdump kernel...
> > [   80.737435] Bye!
> > [    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
> > [    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07
> (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld
> (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
> > <snip>
> >
> >
> >
> > xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
> > MemTotal:        2092876 kB
> > MemFree:         1219928 kB
> > MemAvailable:    1166004 kB
> > Buffers:              32 kB
> > Cached:           756952 kB
> > SwapCached:            0 kB
> > Active:             1480 kB
> > Inactive:          24164 kB
> > Active(anon):       1452 kB
> > Inactive(anon):    24160 kB
> > xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump
> > [  975.284865] Unable to handle kernel level 3 address size fault at
> > virtual address ffff80008d7cf000 [  975.293871] Mem abort info:
> > [  975.296669]   ESR = 0x0000000096000003
> > [  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
> > [  975.305738]   SET = 0, FnV = 0
> > [  975.308788]   EA = 0, S1PTW = 0
> > [  975.311925]   FSC = 0x03: level 3 address size fault
> > [  975.316888] Data abort info:
> > [  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
> > [  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> > [  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> > [  975.335599] swapper pgtable: 4k pages, 48-bit VAs,
> > pgdp=000005016ef6b000 [  975.342297] [ffff80008d7cf000]
> > pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003,
> > pmd=100005017b695003, pte=00687fff84000703 [  975.354827] Internal
> error: Oops: 0000000096000003 [#4] SMP [  975.360392] Modules linked in:
> > 3  975.
> > 63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-
> ge28001fb4e07 #23
> > [  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA
> > (DT) [  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT
> > -SSBS BTYPE=--) [  975.386119] pc : __memcpy+0x110/0x230 [
> > 975.389783] lr : _copy_to_iter+0x3d8/0x4d0 [  975.393874] sp :
> > ffff80008dc939a0 [  975.397178] x29: ffff80008dc939a0 x28:
> > ffff05013c1bea30 x27: 0000000000001000 [  975.404309] x26:
> > 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000 [
> > 975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21:
> > 0000000000001000 [  975.418570] x20: ffff000000000000 x19:
> > 0000000000001000 x18: 0000000000000000 [  975.425699] x17:
> > 0000000000000000 x16: 0000000000000000 x15: 0140000000000000 [
> > 975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12:
> > 0000fffef6831000 [  975.439958] x11: ffff80008d9cf000 x10:
> > 0000000000000000 x9 : 0000000000000000 [  975.447088] x8 :
> > ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001 [
> > 975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 :
> 0000000000000000 [  975.461346] x2 : 0000000000001000 x1 :
> ffff80008d7cf000 x0 : ffff0501370e8000 [  975.468476] Call trace:
> > [  975.470912]  __memcpy+0x110/0x230
> > [  975.474221]  copy_oldmem_page+0x70/0xac [  975.478050]
> > read_from_oldmem.part.0+0x120/0x188
> > [  975.482663]  read_vmcore+0x14c/0x238 [  975.486231]
> > proc_reg_read_iter+0x84/0xd8 [  975.490233]
> > copy_splice_read+0x160/0x288 [  975.494236]
> > vfs_splice_read+0xac/0x10c [  975.498063]
> > splice_direct_to_actor+0xa4/0x26c [  975.502498]
> > do_splice_direct+0x90/0xdc [  975.506325]  do_sendfile+0x344/0x454 [
> > 975.509892]  __arm64_sys_sendfile64+0x134/0x140
> > [  975.514415]  invoke_syscall+0x54/0x124 [  975.518157]
> > el0_svc_common.constprop.0+0xc4/0xe4
> > [  975.522854]  do_el0_svc+0x38/0x98
> > [  975.526162]  el0_svc+0x2c/0x84
> > [  975.529211]  el0t_64_sync_handler+0x100/0x12c [  975.533562]
> > el0t_64_sync+0x190/0x194 [  975.537218] Code: cb01000e b4fffc2e
> > eb0201df 540004a3 (a940342c) [  975.543302] ---[ end trace
> > 0000000000000000 ]--- t message from
> > systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> >
> > kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003
> > [#4] SMP
> >
> >
> > Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue
> 2022-11-08 14:16:20 UTC):
> >
> > kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3
> > (a940342c)
> >
> > Segmentation fault
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore
> > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
> > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
> > -r--------    1 root     root     18446603353488633856 Nov  8 14:05
> /proc/vmcore
> >
> > Thanks,
> > Radhey
> >

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Alexander Kamensky]

Hi All,

Sorry for the top post, but I believe that I might have posted a fix
for this issue a couple days ago.

Please check and see if it helps
https://lore.kernel.org/kexec/20230819191119.975299-1-alexander.kamensky42@gmail.com/T/#u

Explanation for the issue I observed with a similar secondary kernel
traceback on arm64 is in the commit message.

Best Regards,
Alexander Kamensky

On Mon, Aug 21, 2023 at 5:25 AM Pandey, Radhey Shyam
<radhey.shyam.pandey@amd.com> wrote:
>
> > -----Original Message-----
> > From: bhe@redhat.com <bhe@redhat.com>
> > Sent: Monday, August 14, 2023 6:08 PM
> > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> > Cc: piliu@redhat.com; kexec@lists.infradead.org; linux-
> > kernel@vger.kernel.org; Sarangi, Anirudha <anirudha.sarangi@amd.com>
> > Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> > arm64 platform
> >
> > On 08/11/23 at 01:27pm, Pandey, Radhey Shyam wrote:
> > > > -----Original Message-----
> > > > From: bhe@redhat.com <bhe@redhat.com>
> > > > Sent: Wednesday, August 9, 2023 7:42 AM
> > > > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> > > > piliu@redhat.com
> > > > Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> > > > Subject: Re: kexec reports "Cannot get kernel _text symbol address"
> > > > on
> > > > arm64 platform
> > > >
> > > > On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > > > > Hi,
> > > > >
> > > > > I am trying to bring up kdump on arm64 platform[1]. But I get
> > > > > "Cannot get
> > > > kernel _text symbol address".
> > > > >
> > > > > Is there some Dump-capture kernel config options that I am missing?
> > > > >
> > > > > FYI, copied below complete kexec debug log.
> > > > >
> > > > > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> > > >
> > > > Your description isn't clear. You saw the printing, then your kdump
> > > > kernel loading succeeded or not?
> > > >
> > > > If no, have you tried applying Pingfan's patchset and still saw the issue?
> > > >
> > > > [PATCHv7 0/5] arm64: zboot support
> > > > https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/
> > > > T/#u
> > >
> > > I was able to proceed further with loading with crash kernel on triggering
> > system crash.
> > > echo c > /proc/sysrq-trigger
> > >
> > > But when I copy /proc/vmcore it throws memory abort. Also I see size of
> > /proc/vmcore really huge (18446603353488633856).
> > > Any possible guess on what could be wrong?
> >
> > I didn't reproduce this issue on a arm64 baremetal system with the latest
> > kernel. From the log, It could be the iov_iter convertion patch which caused
> > this. Can you revert below patch to see if it works?
> >
> > 5d8de293c224 vmcore: convert copy_oldmem_page() to take an iov_iter
>
> Revert of this commit resulted in lot of conflicts. So as a safer side I checkout
> v5.18 kernel version before above commit. Still I see the same issue.
>
> / # ls -lrth /proc/vmcore
> -r--------    1 root     root       16.0E Aug 21 12:16 /proc/vmcore
> / # dmesg | grep -i 5.18
> [    0.000000] Linux version 5.18.0-00001-g689fdf110e63-dirty (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #37 SMP Mon Aug 21 17:38:24 IST 2023
> [    2.494578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
> [    2.514941] usb usb1: Manufacturer: Linux 5.18.0-00001-g689fdf110e63-dirty xhci-hcd
> [    2.555265] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
> [    2.575621] usb usb2: Manufacturer: Linux 5.18.0-00001-g689fdf110e63-dirty xhci-hcd
> [    3.152182] usb 1-1: new high-speed USB device number 2 using xhci-hcd
> / # cp /proc/vmcore dump
> [   86.204704] Unable to handle kernel level 3 address size fault at virtual address ffff800009b75000
> [   86.213677] Mem abort info:
> [   86.216464]   ESR = 0x96000003
> [   86.219508]   EC = 0x25: DABT (current EL), IL = 32 bits
> [   86.224812]   SET = 0, FnV = 0
> [   86.227856]   EA = 0, S1PTW = 0
> [   86.230989]   FSC = 0x03: level 3 address size fault
> [   86.235945] Data abort info:
> [   86.238819]   ISV = 0, ISS = 0x00000003
> [   86.242646]   CM = 0, WnR = 0
> [   86.245608] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000043049000
> [   86.252304] [ffff800009b75000] pgd=1000000061ffe003, p4d=1000000061ffe003, pud=1000000061ffd003, pmd=1000000043c12003, pte=00687ffff8200703
> [   86.264828] Internal error: Oops: 96000003 [#1] SMP
> [   86.269696] Modules linked in:
> [   86.272741] CPU: 1 PID: 298 Comm: cp Not tainted 5.18.0-00001-g689fdf110e63-dirty #37
> [   86.280562] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
> [   86.286905] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [   86.293857] pc : __arch_copy_to_user+0x180/0x240
> [   86.298475] lr : copy_oldmem_page+0xa8/0x110
> [   86.302738] sp : ffff80000af6bc50
> [   86.306041] x29: ffff80000af6bc50 x28: ffff8000097de3b0 x27: ffff8000097de228
> [   86.313170] x26: 0000000000000000 x25: ffff80000af6bd60 x24: 0000000000000000
> [   86.320299] x23: ffff800009b75000 x22: 0000000000000001 x21: 0000ffffffa1e5a8
> [   86.327427] x20: 0000000000000000 x19: 0000000000001000 x18: 0000000000000000
> [   86.334555] x17: 0000000000000000 x16: 0000000000000000 x15: ffff800009b75000
> [   86.341682] x14: ffff800009863568 x13: 0000000000000000 x12: ffff800008000000
> [   86.348810] x11: 00007ffff8201000 x10: ffff800009b75fff x9 : 0000000000000000
> [   86.355937] x8 : ffff800009b76000 x7 : 0400000000000001 x6 : 0000ffffffa1e5a8
> [   86.363065] x5 : 0000ffffffa1f5a8 x4 : 0000000000000000 x3 : 0000ffffffffffff
> [   86.370192] x2 : 0000000000000f80 x1 : ffff800009b75000 x0 : 0000ffffffa1e5a8
> [   86.377320] Call trace:
> [   86.379755]  __arch_copy_to_user+0x180/0x240
> [   86.384018]  read_from_oldmem.part.0+0x160/0x1f4
> [   86.388629]  read_vmcore+0xe4/0x214
> [   86.392109]  proc_reg_read+0xb0/0x100
> [   86.395763]  vfs_read+0x90/0x1dc
> [   86.398981]  ksys_read+0x70/0x10c
> [   86.402286]  __arm64_sys_read+0x20/0x30
> [   86.406111]  invoke_syscall+0x54/0x124
> [   86.409852]  el0_svc_common.constprop.0+0x44/0xec
> [   86.414547]  do_el0_svc+0x70/0x90
> [   86.417853]  el0_svc+0x50/0xa4
> [   86.420899]  el0t_64_sync_handler+0x10c/0x140
> [   86.425247]  el0t_64_sync+0x18c/0x190
> [   86.428902] Code: d503201f d503201f d503201f d503201f (a8c12027)
> [   86.434984] ---[ end trace 0000000000000000 ]---
> Segmentation fault
>
>
> >
> > >
> > >
> > > [   80.733523] Starting crashdump kernel...
> > > [   80.737435] Bye!
> > > [    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
> > > [    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07
> > (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld
> > (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
> > > <snip>
> > >
> > >
> > >
> > > xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
> > > MemTotal:        2092876 kB
> > > MemFree:         1219928 kB
> > > MemAvailable:    1166004 kB
> > > Buffers:              32 kB
> > > Cached:           756952 kB
> > > SwapCached:            0 kB
> > > Active:             1480 kB
> > > Inactive:          24164 kB
> > > Active(anon):       1452 kB
> > > Inactive(anon):    24160 kB
> > > xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump
> > > [  975.284865] Unable to handle kernel level 3 address size fault at
> > > virtual address ffff80008d7cf000 [  975.293871] Mem abort info:
> > > [  975.296669]   ESR = 0x0000000096000003
> > > [  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
> > > [  975.305738]   SET = 0, FnV = 0
> > > [  975.308788]   EA = 0, S1PTW = 0
> > > [  975.311925]   FSC = 0x03: level 3 address size fault
> > > [  975.316888] Data abort info:
> > > [  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
> > > [  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> > > [  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> > > [  975.335599] swapper pgtable: 4k pages, 48-bit VAs,
> > > pgdp=000005016ef6b000 [  975.342297] [ffff80008d7cf000]
> > > pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003,
> > > pmd=100005017b695003, pte=00687fff84000703 [  975.354827] Internal
> > error: Oops: 0000000096000003 [#4] SMP [  975.360392] Modules linked in:
> > > 3  975.
> > > 63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-
> > ge28001fb4e07 #23
> > > [  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA
> > > (DT) [  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT
> > > -SSBS BTYPE=--) [  975.386119] pc : __memcpy+0x110/0x230 [
> > > 975.389783] lr : _copy_to_iter+0x3d8/0x4d0 [  975.393874] sp :
> > > ffff80008dc939a0 [  975.397178] x29: ffff80008dc939a0 x28:
> > > ffff05013c1bea30 x27: 0000000000001000 [  975.404309] x26:
> > > 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000 [
> > > 975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21:
> > > 0000000000001000 [  975.418570] x20: ffff000000000000 x19:
> > > 0000000000001000 x18: 0000000000000000 [  975.425699] x17:
> > > 0000000000000000 x16: 0000000000000000 x15: 0140000000000000 [
> > > 975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12:
> > > 0000fffef6831000 [  975.439958] x11: ffff80008d9cf000 x10:
> > > 0000000000000000 x9 : 0000000000000000 [  975.447088] x8 :
> > > ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001 [
> > > 975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 :
> > 0000000000000000 [  975.461346] x2 : 0000000000001000 x1 :
> > ffff80008d7cf000 x0 : ffff0501370e8000 [  975.468476] Call trace:
> > > [  975.470912]  __memcpy+0x110/0x230
> > > [  975.474221]  copy_oldmem_page+0x70/0xac [  975.478050]
> > > read_from_oldmem.part.0+0x120/0x188
> > > [  975.482663]  read_vmcore+0x14c/0x238 [  975.486231]
> > > proc_reg_read_iter+0x84/0xd8 [  975.490233]
> > > copy_splice_read+0x160/0x288 [  975.494236]
> > > vfs_splice_read+0xac/0x10c [  975.498063]
> > > splice_direct_to_actor+0xa4/0x26c [  975.502498]
> > > do_splice_direct+0x90/0xdc [  975.506325]  do_sendfile+0x344/0x454 [
> > > 975.509892]  __arm64_sys_sendfile64+0x134/0x140
> > > [  975.514415]  invoke_syscall+0x54/0x124 [  975.518157]
> > > el0_svc_common.constprop.0+0xc4/0xe4
> > > [  975.522854]  do_el0_svc+0x38/0x98
> > > [  975.526162]  el0_svc+0x2c/0x84
> > > [  975.529211]  el0t_64_sync_handler+0x100/0x12c [  975.533562]
> > > el0t_64_sync+0x190/0x194 [  975.537218] Code: cb01000e b4fffc2e
> > > eb0201df 540004a3 (a940342c) [  975.543302] ---[ end trace
> > > 0000000000000000 ]--- t message from
> > > systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> > >
> > > kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003
> > > [#4] SMP
> > >
> > >
> > > Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue
> > 2022-11-08 14:16:20 UTC):
> > >
> > > kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3
> > > (a940342c)
> > >
> > > Segmentation fault
> > > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore
> > > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
> > > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
> > > -r--------    1 root     root     18446603353488633856 Nov  8 14:05
> > /proc/vmcore
> > >
> > > Thanks,
> > > Radhey
> > >
>
>
> _______________________________________________
> kexec mailing list
> kexec@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Alexander Kamensky]

Hi All,

Sorry for the top post, but I believe that I might have posted a fix
for this issue a couple days ago.

Please check and see if it helps
https://lore.kernel.org/kexec/20230819191119.975299-1-alexander.kamensky42@gmail.com/T/#u

Explanation for the issue I observed with a similar secondary kernel
traceback on arm64 is in the commit message.

Best Regards,
Alexander Kamensky

On Mon, Aug 21, 2023 at 5:25 AM Pandey, Radhey Shyam
<radhey.shyam.pandey@amd.com> wrote:
>
> > -----Original Message-----
> > From: bhe@redhat.com <bhe@redhat.com>
> > Sent: Monday, August 14, 2023 6:08 PM
> > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> > Cc: piliu@redhat.com; kexec@lists.infradead.org; linux-
> > kernel@vger.kernel.org; Sarangi, Anirudha <anirudha.sarangi@amd.com>
> > Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> > arm64 platform
> >
> > On 08/11/23 at 01:27pm, Pandey, Radhey Shyam wrote:
> > > > -----Original Message-----
> > > > From: bhe@redhat.com <bhe@redhat.com>
> > > > Sent: Wednesday, August 9, 2023 7:42 AM
> > > > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>;
> > > > piliu@redhat.com
> > > > Cc: kexec@lists.infradead.org; linux-kernel@vger.kernel.org
> > > > Subject: Re: kexec reports "Cannot get kernel _text symbol address"
> > > > on
> > > > arm64 platform
> > > >
> > > > On 08/08/23 at 07:17pm, Pandey, Radhey Shyam wrote:
> > > > > Hi,
> > > > >
> > > > > I am trying to bring up kdump on arm64 platform[1]. But I get
> > > > > "Cannot get
> > > > kernel _text symbol address".
> > > > >
> > > > > Is there some Dump-capture kernel config options that I am missing?
> > > > >
> > > > > FYI, copied below complete kexec debug log.
> > > > >
> > > > > [1]: https://www.xilinx.com/products/boards-and-kits/vck190.html
> > > >
> > > > Your description isn't clear. You saw the printing, then your kdump
> > > > kernel loading succeeded or not?
> > > >
> > > > If no, have you tried applying Pingfan's patchset and still saw the issue?
> > > >
> > > > [PATCHv7 0/5] arm64: zboot support
> > > > https://lore.kernel.org/all/20230803024152.11663-1-piliu@redhat.com/
> > > > T/#u
> > >
> > > I was able to proceed further with loading with crash kernel on triggering
> > system crash.
> > > echo c > /proc/sysrq-trigger
> > >
> > > But when I copy /proc/vmcore it throws memory abort. Also I see size of
> > /proc/vmcore really huge (18446603353488633856).
> > > Any possible guess on what could be wrong?
> >
> > I didn't reproduce this issue on a arm64 baremetal system with the latest
> > kernel. From the log, It could be the iov_iter convertion patch which caused
> > this. Can you revert below patch to see if it works?
> >
> > 5d8de293c224 vmcore: convert copy_oldmem_page() to take an iov_iter
>
> Revert of this commit resulted in lot of conflicts. So as a safer side I checkout
> v5.18 kernel version before above commit. Still I see the same issue.
>
> / # ls -lrth /proc/vmcore
> -r--------    1 root     root       16.0E Aug 21 12:16 /proc/vmcore
> / # dmesg | grep -i 5.18
> [    0.000000] Linux version 5.18.0-00001-g689fdf110e63-dirty (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #37 SMP Mon Aug 21 17:38:24 IST 2023
> [    2.494578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18
> [    2.514941] usb usb1: Manufacturer: Linux 5.18.0-00001-g689fdf110e63-dirty xhci-hcd
> [    2.555265] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.18
> [    2.575621] usb usb2: Manufacturer: Linux 5.18.0-00001-g689fdf110e63-dirty xhci-hcd
> [    3.152182] usb 1-1: new high-speed USB device number 2 using xhci-hcd
> / # cp /proc/vmcore dump
> [   86.204704] Unable to handle kernel level 3 address size fault at virtual address ffff800009b75000
> [   86.213677] Mem abort info:
> [   86.216464]   ESR = 0x96000003
> [   86.219508]   EC = 0x25: DABT (current EL), IL = 32 bits
> [   86.224812]   SET = 0, FnV = 0
> [   86.227856]   EA = 0, S1PTW = 0
> [   86.230989]   FSC = 0x03: level 3 address size fault
> [   86.235945] Data abort info:
> [   86.238819]   ISV = 0, ISS = 0x00000003
> [   86.242646]   CM = 0, WnR = 0
> [   86.245608] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000043049000
> [   86.252304] [ffff800009b75000] pgd=1000000061ffe003, p4d=1000000061ffe003, pud=1000000061ffd003, pmd=1000000043c12003, pte=00687ffff8200703
> [   86.264828] Internal error: Oops: 96000003 [#1] SMP
> [   86.269696] Modules linked in:
> [   86.272741] CPU: 1 PID: 298 Comm: cp Not tainted 5.18.0-00001-g689fdf110e63-dirty #37
> [   86.280562] Hardware name: Xilinx Versal vck190 Eval board revA (DT)
> [   86.286905] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [   86.293857] pc : __arch_copy_to_user+0x180/0x240
> [   86.298475] lr : copy_oldmem_page+0xa8/0x110
> [   86.302738] sp : ffff80000af6bc50
> [   86.306041] x29: ffff80000af6bc50 x28: ffff8000097de3b0 x27: ffff8000097de228
> [   86.313170] x26: 0000000000000000 x25: ffff80000af6bd60 x24: 0000000000000000
> [   86.320299] x23: ffff800009b75000 x22: 0000000000000001 x21: 0000ffffffa1e5a8
> [   86.327427] x20: 0000000000000000 x19: 0000000000001000 x18: 0000000000000000
> [   86.334555] x17: 0000000000000000 x16: 0000000000000000 x15: ffff800009b75000
> [   86.341682] x14: ffff800009863568 x13: 0000000000000000 x12: ffff800008000000
> [   86.348810] x11: 00007ffff8201000 x10: ffff800009b75fff x9 : 0000000000000000
> [   86.355937] x8 : ffff800009b76000 x7 : 0400000000000001 x6 : 0000ffffffa1e5a8
> [   86.363065] x5 : 0000ffffffa1f5a8 x4 : 0000000000000000 x3 : 0000ffffffffffff
> [   86.370192] x2 : 0000000000000f80 x1 : ffff800009b75000 x0 : 0000ffffffa1e5a8
> [   86.377320] Call trace:
> [   86.379755]  __arch_copy_to_user+0x180/0x240
> [   86.384018]  read_from_oldmem.part.0+0x160/0x1f4
> [   86.388629]  read_vmcore+0xe4/0x214
> [   86.392109]  proc_reg_read+0xb0/0x100
> [   86.395763]  vfs_read+0x90/0x1dc
> [   86.398981]  ksys_read+0x70/0x10c
> [   86.402286]  __arm64_sys_read+0x20/0x30
> [   86.406111]  invoke_syscall+0x54/0x124
> [   86.409852]  el0_svc_common.constprop.0+0x44/0xec
> [   86.414547]  do_el0_svc+0x70/0x90
> [   86.417853]  el0_svc+0x50/0xa4
> [   86.420899]  el0t_64_sync_handler+0x10c/0x140
> [   86.425247]  el0t_64_sync+0x18c/0x190
> [   86.428902] Code: d503201f d503201f d503201f d503201f (a8c12027)
> [   86.434984] ---[ end trace 0000000000000000 ]---
> Segmentation fault
>
>
> >
> > >
> > >
> > > [   80.733523] Starting crashdump kernel...
> > > [   80.737435] Bye!
> > > [    0.000000] Booting Linux on physical CPU 0x0000000001 [0x410fd083]
> > > [    0.000000] Linux version 6.5.0-rc4-ge28001fb4e07
> > (radheys@xhdradheys41) (aarch64-xilinx-linux-gcc.real (GCC) 12.2.0, GNU ld
> > (GNU Binutils) 2.39.0.20220819) #23 SMP Fri Aug 11 16:25:34 IST 2023
> > > <snip>
> > >
> > >
> > >
> > > xilinx-vck190-20232:/run/media/mmcblk0p1# cat /proc/meminfo | head
> > > MemTotal:        2092876 kB
> > > MemFree:         1219928 kB
> > > MemAvailable:    1166004 kB
> > > Buffers:              32 kB
> > > Cached:           756952 kB
> > > SwapCached:            0 kB
> > > Active:             1480 kB
> > > Inactive:          24164 kB
> > > Active(anon):       1452 kB
> > > Inactive(anon):    24160 kB
> > > xilinx-vck190-20232:/run/media/mmcblk0p1# cp /proc/vmcore dump
> > > [  975.284865] Unable to handle kernel level 3 address size fault at
> > > virtual address ffff80008d7cf000 [  975.293871] Mem abort info:
> > > [  975.296669]   ESR = 0x0000000096000003
> > > [  975.300425]   EC = 0x25: DABT (current EL), IL = 32 bits
> > > [  975.305738]   SET = 0, FnV = 0
> > > [  975.308788]   EA = 0, S1PTW = 0
> > > [  975.311925]   FSC = 0x03: level 3 address size fault
> > > [  975.316888] Data abort info:
> > > [  975.319763]   ISV = 0, ISS = 0x00000003, ISS2 = 0x00000000
> > > [  975.325245]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
> > > [  975.330292]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
> > > [  975.335599] swapper pgtable: 4k pages, 48-bit VAs,
> > > pgdp=000005016ef6b000 [  975.342297] [ffff80008d7cf000]
> > > pgd=10000501eddfe003, p4d=10000501eddfe003, pud=10000501eddfd003,
> > > pmd=100005017b695003, pte=00687fff84000703 [  975.354827] Internal
> > error: Oops: 0000000096000003 [#4] SMP [  975.360392] Modules linked in:
> > > 3  975.
> > > 63440] CBPrUo:a d0c aPID: 664 Comm: cp Tainted: G      D            6.5.0-rc4-
> > ge28001fb4e07 #23
> > > [  975.372822] Hardware name: Xilinx Versal vck190 Eval board revA
> > > (DT) [  975.379165] pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT
> > > -SSBS BTYPE=--) [  975.386119] pc : __memcpy+0x110/0x230 [
> > > 975.389783] lr : _copy_to_iter+0x3d8/0x4d0 [  975.393874] sp :
> > > ffff80008dc939a0 [  975.397178] x29: ffff80008dc939a0 x28:
> > > ffff05013c1bea30 x27: 0000000000001000 [  975.404309] x26:
> > > 0000000000001000 x25: 0000000000001000 x24: ffff80008d7cf000 [
> > > 975.411440] x23: 0000040000000000 x22: ffff80008dc93ba0 x21:
> > > 0000000000001000 [  975.418570] x20: ffff000000000000 x19:
> > > 0000000000001000 x18: 0000000000000000 [  975.425699] x17:
> > > 0000000000000000 x16: 0000000000000000 x15: 0140000000000000 [
> > > 975.432829] x14: ffff8500a9919000 x13: 0040000000000001 x12:
> > > 0000fffef6831000 [  975.439958] x11: ffff80008d9cf000 x10:
> > > 0000000000000000 x9 : 0000000000000000 [  975.447088] x8 :
> > > ffff80008d7d0000 x7 : ffff0501addfd358 x6 : 0400000000000001 [
> > > 975.454217] x5 : ffff0501370e9000 x4 : ffff80008d7d0000 x3 :
> > 0000000000000000 [  975.461346] x2 : 0000000000001000 x1 :
> > ffff80008d7cf000 x0 : ffff0501370e8000 [  975.468476] Call trace:
> > > [  975.470912]  __memcpy+0x110/0x230
> > > [  975.474221]  copy_oldmem_page+0x70/0xac [  975.478050]
> > > read_from_oldmem.part.0+0x120/0x188
> > > [  975.482663]  read_vmcore+0x14c/0x238 [  975.486231]
> > > proc_reg_read_iter+0x84/0xd8 [  975.490233]
> > > copy_splice_read+0x160/0x288 [  975.494236]
> > > vfs_splice_read+0xac/0x10c [  975.498063]
> > > splice_direct_to_actor+0xa4/0x26c [  975.502498]
> > > do_splice_direct+0x90/0xdc [  975.506325]  do_sendfile+0x344/0x454 [
> > > 975.509892]  __arm64_sys_sendfile64+0x134/0x140
> > > [  975.514415]  invoke_syscall+0x54/0x124 [  975.518157]
> > > el0_svc_common.constprop.0+0xc4/0xe4
> > > [  975.522854]  do_el0_svc+0x38/0x98
> > > [  975.526162]  el0_svc+0x2c/0x84
> > > [  975.529211]  el0t_64_sync_handler+0x100/0x12c [  975.533562]
> > > el0t_64_sync+0x190/0x194 [  975.537218] Code: cb01000e b4fffc2e
> > > eb0201df 540004a3 (a940342c) [  975.543302] ---[ end trace
> > > 0000000000000000 ]--- t message from
> > > systemd-journald@xilinx-vck190-20232 (Tue 2022-11-08 14:16:20 UTC):
> > >
> > > kernel[539]: [  975.354827] Internal error: Oops: 0000000096000003
> > > [#4] SMP
> > >
> > >
> > > Broadcast message from systemd-journald@xilinx-vck190-20232 (Tue
> > 2022-11-08 14:16:20 UTC):
> > >
> > > kernel[539]: [  975.537218] Code: cb01000e b4fffc2e eb0201df 540004a3
> > > (a940342c)
> > >
> > > Segmentation fault
> > > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lrth /proc/vmcore
> > > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -lh /proc/vmcore
> > > -r--------    1 root     root       16.0E Nov  8 14:05 /proc/vmcore
> > > xilinx-vck190-20232:/run/media/mmcblk0p1# ls -l /proc/vmcore
> > > -r--------    1 root     root     18446603353488633856 Nov  8 14:05
> > /proc/vmcore
> > >
> > > Thanks,
> > > Radhey
> > >
>
>
> _______________________________________________
> kexec mailing list
> kexec@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec

RE: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Pandey, Radhey Shyam]

> -----Original Message-----
> From: Alexander Kamensky <alexander.kamensky42@gmail.com>
> Sent: Tuesday, August 22, 2023 9:24 AM
> To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> Cc: bhe@redhat.com; piliu@redhat.com; kexec@lists.infradead.org; linux-
> kernel@vger.kernel.org; Sarangi, Anirudha <anirudha.sarangi@amd.com>
> Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> arm64 platform
> 
> Hi All,
> 
> Sorry for the top post, but I believe that I might have posted a fix for this
> issue a couple days ago.
> 
> Please check and see if it helps
> https://lore.kernel.org/kexec/20230819191119.975299-1-
> alexander.kamensky42@gmail.com/T/#u
> 
> Explanation for the issue I observed with a similar secondary kernel
> traceback on arm64 is in the commit message.

I fetched latest kexec sources (777ca453ca69e46f7376b07ba6727bd261ec97ef)
and applied above patch, a bit improved but still vmcore size is huge.

/ # ls -lrth /proc/vmcore 
-r--------    1 root     root       15.5G Aug 23 18:55 /proc/vmcore

Thanks,
Radhey
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

RE: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Pandey, Radhey Shyam]

> -----Original Message-----
> From: Alexander Kamensky <alexander.kamensky42@gmail.com>
> Sent: Tuesday, August 22, 2023 9:24 AM
> To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> Cc: bhe@redhat.com; piliu@redhat.com; kexec@lists.infradead.org; linux-
> kernel@vger.kernel.org; Sarangi, Anirudha <anirudha.sarangi@amd.com>
> Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> arm64 platform
> 
> Hi All,
> 
> Sorry for the top post, but I believe that I might have posted a fix for this
> issue a couple days ago.
> 
> Please check and see if it helps
> https://lore.kernel.org/kexec/20230819191119.975299-1-
> alexander.kamensky42@gmail.com/T/#u
> 
> Explanation for the issue I observed with a similar secondary kernel
> traceback on arm64 is in the commit message.

I fetched latest kexec sources (777ca453ca69e46f7376b07ba6727bd261ec97ef)
and applied above patch, a bit improved but still vmcore size is huge.

/ # ls -lrth /proc/vmcore 
-r--------    1 root     root       15.5G Aug 23 18:55 /proc/vmcore

Thanks,
Radhey

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Alexander Kamensky]

On Wed, Aug 23, 2023 at 12:09 PM Pandey, Radhey Shyam
<radhey.shyam.pandey@amd.com> wrote:
>
> > -----Original Message-----
> > From: Alexander Kamensky <alexander.kamensky42@gmail.com>
> > Sent: Tuesday, August 22, 2023 9:24 AM
> > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> > Cc: bhe@redhat.com; piliu@redhat.com; kexec@lists.infradead.org; linux-
> > kernel@vger.kernel.org; Sarangi, Anirudha <anirudha.sarangi@amd.com>
> > Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> > arm64 platform
> >
> > Hi All,
> >
> > Sorry for the top post, but I believe that I might have posted a fix for this
> > issue a couple days ago.
> >
> > Please check and see if it helps
> > https://lore.kernel.org/kexec/20230819191119.975299-1-
> > alexander.kamensky42@gmail.com/T/#u
> >
> > Explanation for the issue I observed with a similar secondary kernel
> > traceback on arm64 is in the commit message.
>
> I fetched latest kexec sources (777ca453ca69e46f7376b07ba6727bd261ec97ef)
> and applied above patch, a bit improved but still vmcore size is huge.
>
> / # ls -lrth /proc/vmcore
> -r--------    1 root     root       15.5G Aug 23 18:55 /proc/vmcore
>
How big is your system memory? If it is 16G then the above is normal.

The most important thing is can your secondary kernel read it? For example

cat /proc/vmcore > /dev/null

If you want to capture only kernel core out of /proc/vmcore you need
to use makedumpfile
to filter out the rest of the memory.

Thanks,
Alexander

> Thanks,
> Radhey

_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

Re: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Alexander Kamensky]

On Wed, Aug 23, 2023 at 12:09 PM Pandey, Radhey Shyam
<radhey.shyam.pandey@amd.com> wrote:
>
> > -----Original Message-----
> > From: Alexander Kamensky <alexander.kamensky42@gmail.com>
> > Sent: Tuesday, August 22, 2023 9:24 AM
> > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> > Cc: bhe@redhat.com; piliu@redhat.com; kexec@lists.infradead.org; linux-
> > kernel@vger.kernel.org; Sarangi, Anirudha <anirudha.sarangi@amd.com>
> > Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> > arm64 platform
> >
> > Hi All,
> >
> > Sorry for the top post, but I believe that I might have posted a fix for this
> > issue a couple days ago.
> >
> > Please check and see if it helps
> > https://lore.kernel.org/kexec/20230819191119.975299-1-
> > alexander.kamensky42@gmail.com/T/#u
> >
> > Explanation for the issue I observed with a similar secondary kernel
> > traceback on arm64 is in the commit message.
>
> I fetched latest kexec sources (777ca453ca69e46f7376b07ba6727bd261ec97ef)
> and applied above patch, a bit improved but still vmcore size is huge.
>
> / # ls -lrth /proc/vmcore
> -r--------    1 root     root       15.5G Aug 23 18:55 /proc/vmcore
>
How big is your system memory? If it is 16G then the above is normal.

The most important thing is can your secondary kernel read it? For example

cat /proc/vmcore > /dev/null

If you want to capture only kernel core out of /proc/vmcore you need
to use makedumpfile
to filter out the rest of the memory.

Thanks,
Alexander

> Thanks,
> Radhey

RE: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Pandey, Radhey Shyam]

> -----Original Message-----
> From: Alexander Kamensky <alexander.kamensky42@gmail.com>
> Sent: Thursday, August 24, 2023 8:35 PM
> To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> Cc: bhe@redhat.com; piliu@redhat.com; kexec@lists.infradead.org; linux-
> kernel@vger.kernel.org; Sarangi, Anirudha <anirudha.sarangi@amd.com>
> Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> arm64 platform
> 
> On Wed, Aug 23, 2023 at 12:09 PM Pandey, Radhey Shyam
> <radhey.shyam.pandey@amd.com> wrote:
> >
> > > -----Original Message-----
> > > From: Alexander Kamensky <alexander.kamensky42@gmail.com>
> > > Sent: Tuesday, August 22, 2023 9:24 AM
> > > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> > > Cc: bhe@redhat.com; piliu@redhat.com; kexec@lists.infradead.org;
> > > linux- kernel@vger.kernel.org; Sarangi, Anirudha
> > > <anirudha.sarangi@amd.com>
> > > Subject: Re: kexec reports "Cannot get kernel _text symbol address"
> > > on
> > > arm64 platform
> > >
> > > Hi All,
> > >
> > > Sorry for the top post, but I believe that I might have posted a fix
> > > for this issue a couple days ago.
> > >
> > > Please check and see if it helps
> > > https://lore.kernel.org/kexec/20230819191119.975299-1-
> > > alexander.kamensky42@gmail.com/T/#u
> > >
> > > Explanation for the issue I observed with a similar secondary kernel
> > > traceback on arm64 is in the commit message.
> >
> > I fetched latest kexec sources
> > (777ca453ca69e46f7376b07ba6727bd261ec97ef)
> > and applied above patch, a bit improved but still vmcore size is huge.
> >
> > / # ls -lrth /proc/vmcore
> > -r--------    1 root     root       15.5G Aug 23 18:55 /proc/vmcore
> >
> How big is your system memory? If it is 16G then the above is normal.

Yes, it's 16G.

> 
> The most important thing is can your secondary kernel read it? For example
> 
> cat /proc/vmcore > /dev/null

This runs fine and I can read /proc/vmcore

> 
> If you want to capture only kernel core out of /proc/vmcore you need to use
> makedumpfile to filter out the rest of the memory.

Thanks for the pointers. I could use makedumpfile to extract dmesg dump 
and it pointed to system Kernel dump correctly also compress dump data.

Further exploring on it and will report how the analysis goes.

xilinx-vck190-20232:/run/media/mmcblk0p1# makedumpfile -c --split -d 3   /proc/vmcore dumpfile1 dumpfile2
The kernel version is not supported.
The makedumpfile operation may be incomplete.
Checking for memory holes                         : [100.0 %] |                  Checking for memory holes                         : [100.0 %] |             
Checking for memory holes                         : [100.0 %] /                  Checking for memory holes                         : [100.0 %] /             
Checking for memory holes                         : [100.0 %] |                  Checking for memory holes                         : [100.0 %] |             
Checking for memory holes                         : [100.0 %] \                  Checking for memory holes                         : [100.0 %] \             
Checking for memory holes                         : [100.0 %] |                  Checking for memory holes                         : [100.0 %] |             
Checking for memory holes                         : [100.0 %] -                  Checking for memory holes                         : [100.0 %] -             
Copying data                                      : [ 45.7 %] -        eta: 6m13s
Copying data                                      : [ 54.1 %] -           eta: 1s

The dumpfiles are saved to dumpfile1, and dumpfile2.

makedumpfile Completed. 

> 
> Thanks,
> Alexander
> 
> > Thanks,
> > Radhey
_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

RE: kexec reports "Cannot get kernel _text symbol address" on arm64 platform

[Pandey, Radhey Shyam]

> -----Original Message-----
> From: Alexander Kamensky <alexander.kamensky42@gmail.com>
> Sent: Thursday, August 24, 2023 8:35 PM
> To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> Cc: bhe@redhat.com; piliu@redhat.com; kexec@lists.infradead.org; linux-
> kernel@vger.kernel.org; Sarangi, Anirudha <anirudha.sarangi@amd.com>
> Subject: Re: kexec reports "Cannot get kernel _text symbol address" on
> arm64 platform
> 
> On Wed, Aug 23, 2023 at 12:09 PM Pandey, Radhey Shyam
> <radhey.shyam.pandey@amd.com> wrote:
> >
> > > -----Original Message-----
> > > From: Alexander Kamensky <alexander.kamensky42@gmail.com>
> > > Sent: Tuesday, August 22, 2023 9:24 AM
> > > To: Pandey, Radhey Shyam <radhey.shyam.pandey@amd.com>
> > > Cc: bhe@redhat.com; piliu@redhat.com; kexec@lists.infradead.org;
> > > linux- kernel@vger.kernel.org; Sarangi, Anirudha
> > > <anirudha.sarangi@amd.com>
> > > Subject: Re: kexec reports "Cannot get kernel _text symbol address"
> > > on
> > > arm64 platform
> > >
> > > Hi All,
> > >
> > > Sorry for the top post, but I believe that I might have posted a fix
> > > for this issue a couple days ago.
> > >
> > > Please check and see if it helps
> > > https://lore.kernel.org/kexec/20230819191119.975299-1-
> > > alexander.kamensky42@gmail.com/T/#u
> > >
> > > Explanation for the issue I observed with a similar secondary kernel
> > > traceback on arm64 is in the commit message.
> >
> > I fetched latest kexec sources
> > (777ca453ca69e46f7376b07ba6727bd261ec97ef)
> > and applied above patch, a bit improved but still vmcore size is huge.
> >
> > / # ls -lrth /proc/vmcore
> > -r--------    1 root     root       15.5G Aug 23 18:55 /proc/vmcore
> >
> How big is your system memory? If it is 16G then the above is normal.

Yes, it's 16G.

> 
> The most important thing is can your secondary kernel read it? For example
> 
> cat /proc/vmcore > /dev/null

This runs fine and I can read /proc/vmcore

> 
> If you want to capture only kernel core out of /proc/vmcore you need to use
> makedumpfile to filter out the rest of the memory.

Thanks for the pointers. I could use makedumpfile to extract dmesg dump 
and it pointed to system Kernel dump correctly also compress dump data.

Further exploring on it and will report how the analysis goes.

xilinx-vck190-20232:/run/media/mmcblk0p1# makedumpfile -c --split -d 3   /proc/vmcore dumpfile1 dumpfile2
The kernel version is not supported.
The makedumpfile operation may be incomplete.
Checking for memory holes                         : [100.0 %] |                  Checking for memory holes                         : [100.0 %] |             
Checking for memory holes                         : [100.0 %] /                  Checking for memory holes                         : [100.0 %] /             
Checking for memory holes                         : [100.0 %] |                  Checking for memory holes                         : [100.0 %] |             
Checking for memory holes                         : [100.0 %] \                  Checking for memory holes                         : [100.0 %] \             
Checking for memory holes                         : [100.0 %] |                  Checking for memory holes                         : [100.0 %] |             
Checking for memory holes                         : [100.0 %] -                  Checking for memory holes                         : [100.0 %] -             
Copying data                                      : [ 45.7 %] -        eta: 6m13s
Copying data                                      : [ 54.1 %] -           eta: 1s

The dumpfiles are saved to dumpfile1, and dumpfile2.

makedumpfile Completed. 

> 
> Thanks,
> Alexander
> 
> > Thanks,
> > Radhey