Re: [RFC PATCH v2 07/10] perf: RISC-V: Move T-Head PMU to CPU feature alternative framework

[Yu-Chien Peter Lin <peterlin@andestech.com>]

Hi Conor,

On Thu, Oct 19, 2023 at 05:13:00PM +0100, Conor Dooley wrote:
> Hey,
> 
> On Thu, Oct 19, 2023 at 10:01:19PM +0800, Yu Chien Peter Lin wrote:
> 
> $subject: perf: RISC-V: Move T-Head PMU to CPU feature alternative framework
> 
> IMO, this should be "RISC-V, perf:" or just "RISC-V" as the changes
> being made to the arch code are far more meaningful than those
> elsewhere.

OK will update the subject to "RISC-V:"

> > The custom PMU extension was developed to support perf event sampling
> > prior to the ratification of Sscofpmf. Instead of utilizing the standard
> > bits and CSR of Sscofpmf, a set of custom CSRs is added. So we may
> > consider it as a CPU feature rather than an erratum.
> > 
> > T-Head cores need to append "xtheadpmu" to the riscv,isa-extensions
> > for each cpu node in device tree, and enable CONFIG_THEAD_CUSTOM_PMU
> > for proper functioning as of this commit.
> 
> And in doing so, you regress break perf for existing DTs :(
> You didn't add the property to existing DTS in-kernel either, so if this
> series was applied, perf would just entirely stop working, no?

Only `perf record/top` stop working I think.

There are too many users out there, and don't have the boards to
test, so leave those DTS unchanged, it would be great if T-Head
community could help to check/update their DTS.

> > Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> > ---
> > Hi All,
> > 
> > This is in preparation for introducing other PMU alternative.
> > We follow Conor's suggestion [1] to use cpu feature alternative
> > framework rather than errta, if you want to stick with errata
> > alternative or have other issues, please let me know. Thanks.
> 
> Personally, I like this conversion, but it is going to regress support
> for perf on any T-Head cores which may be a bitter pill to get people to
> actually accept...
> Perhaps we could add this "improved" detection in parallel, and
> eventually remove the m*id based stuff in the future.
> 
> > [1] https://patchwork.kernel.org/project/linux-riscv/patch/20230907021635.1002738-4-peterlin@andestech.com/#25503860
> > 
> > Changes v1 -> v2:
> >   - New patch
> > ---
> >  arch/riscv/Kconfig.errata            | 13 -------------
> >  arch/riscv/errata/thead/errata.c     | 19 -------------------
> >  arch/riscv/include/asm/errata_list.h | 15 +--------------
> >  arch/riscv/include/asm/hwcap.h       |  1 +
> >  arch/riscv/kernel/cpufeature.c       |  1 +
> >  drivers/perf/Kconfig                 | 13 +++++++++++++
> >  drivers/perf/riscv_pmu_sbi.c         | 16 ++++++++++++++--
> >  7 files changed, 30 insertions(+), 48 deletions(-)
> > 
> > diff --git a/arch/riscv/Kconfig.errata b/arch/riscv/Kconfig.errata
> > index 566bcefeab50..35dfb19d6a29 100644
> > --- a/arch/riscv/Kconfig.errata
> > +++ b/arch/riscv/Kconfig.errata
> > @@ -85,17 +85,4 @@ config ERRATA_THEAD_CMO
> >  
> >  	  If you don't know what to do here, say "Y".
> >  
> > -config ERRATA_THEAD_PMU
> > -	bool "Apply T-Head PMU errata"
> > -	depends on ERRATA_THEAD && RISCV_PMU_SBI
> > -	default y
> > -	help
> > -	  The T-Head C9xx cores implement a PMU overflow extension very
> > -	  similar to the core SSCOFPMF extension.
> > -
> > -	  This will apply the overflow errata to handle the non-standard
> > -	  behaviour via the regular SBI PMU driver and interface.
> > -
> > -	  If you don't know what to do here, say "Y".
> > -
> >  endmenu # "CPU errata selection"
> > diff --git a/arch/riscv/errata/thead/errata.c b/arch/riscv/errata/thead/errata.c
> > index 0554ed4bf087..5de5f7209132 100644
> > --- a/arch/riscv/errata/thead/errata.c
> > +++ b/arch/riscv/errata/thead/errata.c
> > @@ -53,22 +53,6 @@ static bool errata_probe_cmo(unsigned int stage,
> >  	return true;
> >  }
> >  
> > -static bool errata_probe_pmu(unsigned int stage,
> > -			     unsigned long arch_id, unsigned long impid)
> > -{
> > -	if (!IS_ENABLED(CONFIG_ERRATA_THEAD_PMU))
> > -		return false;
> > -
> > -	/* target-c9xx cores report arch_id and impid as 0 */
> > -	if (arch_id != 0 || impid != 0)
> > -		return false;
> > -
> > -	if (stage == RISCV_ALTERNATIVES_EARLY_BOOT)
> > -		return false;
> > -
> > -	return true;
> > -}
> > -
> >  static u32 thead_errata_probe(unsigned int stage,
> >  			      unsigned long archid, unsigned long impid)
> >  {
> > @@ -80,9 +64,6 @@ static u32 thead_errata_probe(unsigned int stage,
> >  	if (errata_probe_cmo(stage, archid, impid))
> >  		cpu_req_errata |= BIT(ERRATA_THEAD_CMO);
> >  
> > -	if (errata_probe_pmu(stage, archid, impid))
> > -		cpu_req_errata |= BIT(ERRATA_THEAD_PMU);
> > -
> >  	return cpu_req_errata;
> >  }
> >  
> > diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
> > index c190393aa9db..1b5354a50d55 100644
> > --- a/arch/riscv/include/asm/errata_list.h
> > +++ b/arch/riscv/include/asm/errata_list.h
> > @@ -25,8 +25,7 @@
> >  #ifdef CONFIG_ERRATA_THEAD
> >  #define	ERRATA_THEAD_PBMT 0
> >  #define	ERRATA_THEAD_CMO 1
> > -#define	ERRATA_THEAD_PMU 2
> > -#define	ERRATA_THEAD_NUMBER 3
> > +#define	ERRATA_THEAD_NUMBER 2
> >  #endif
> >  
> >  #ifdef __ASSEMBLY__
> > @@ -147,18 +146,6 @@ asm volatile(ALTERNATIVE_2(						\
> >  	    "r"((unsigned long)(_start) + (_size))			\
> >  	: "a0")
> >  
> > -#define THEAD_C9XX_RV_IRQ_PMU			17
> > -#define THEAD_C9XX_CSR_SCOUNTEROF		0x5c5
> > -
> > -#define ALT_SBI_PMU_OVERFLOW(__ovl)					\
> > -asm volatile(ALTERNATIVE(						\
> > -	"csrr %0, " __stringify(CSR_SSCOUNTOVF),			\
> > -	"csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF),		\
> > -		THEAD_VENDOR_ID, ERRATA_THEAD_PMU,			\
> > -		CONFIG_ERRATA_THEAD_PMU)				\
> > -	: "=r" (__ovl) :						\
> > -	: "memory")
> > -
> >  #endif /* __ASSEMBLY__ */
> >  
> >  #endif
> > diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h
> > index b7b58258f6c7..d3082391c901 100644
> > --- a/arch/riscv/include/asm/hwcap.h
> > +++ b/arch/riscv/include/asm/hwcap.h
> > @@ -58,6 +58,7 @@
> >  #define RISCV_ISA_EXT_ZICSR		40
> >  #define RISCV_ISA_EXT_ZIFENCEI		41
> >  #define RISCV_ISA_EXT_ZIHPM		42
> > +#define RISCV_ISA_EXT_XTHEADPMU		43
> >  
> >  #define RISCV_ISA_EXT_MAX		64
> >  
> > diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
> > index 1cfbba65d11a..4a3fb017026c 100644
> > --- a/arch/riscv/kernel/cpufeature.c
> > +++ b/arch/riscv/kernel/cpufeature.c
> > @@ -181,6 +181,7 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
> >  	__RISCV_ISA_EXT_DATA(svinval, RISCV_ISA_EXT_SVINVAL),
> >  	__RISCV_ISA_EXT_DATA(svnapot, RISCV_ISA_EXT_SVNAPOT),
> >  	__RISCV_ISA_EXT_DATA(svpbmt, RISCV_ISA_EXT_SVPBMT),
> > +	__RISCV_ISA_EXT_DATA(xtheadpmu, RISCV_ISA_EXT_XTHEADPMU),
> 
> Again, this would need to be documented in the dt-binding to be
> acceptable.

Sure, I will add them to dt-binding.

> >  };
> >  
> >  const size_t riscv_isa_ext_count = ARRAY_SIZE(riscv_isa_ext);
> > diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> > index 273d67ecf6d2..c71b6f16bdfa 100644
> > --- a/drivers/perf/Kconfig
> > +++ b/drivers/perf/Kconfig
> > @@ -86,6 +86,19 @@ config RISCV_PMU_SBI
> >  	  full perf feature support i.e. counter overflow, privilege mode
> >  	  filtering, counter configuration.
> >  
> > +config THEAD_CUSTOM_PMU
> > +	bool "T-Head custom PMU support"
> > +	depends on RISCV_ALTERNATIVE && RISCV_PMU_SBI
> > +	default y
> > +	help
> > +	  The T-Head C9xx cores implement a PMU overflow extension very
> > +	  similar to the core SSCOFPMF extension.
> > +
> > +	  This will patch the overflow CSR and handle the non-standard
> > +	  behaviour via the regular SBI PMU driver and interface.
> > +
> > +	  If you don't know what to do here, say "Y".
> > +
> >  config ARM_PMU_ACPI
> >  	depends on ARM_PMU && ACPI
> >  	def_bool y
> > diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> > index f340db9ce1e2..790fc20fe094 100644
> > --- a/drivers/perf/riscv_pmu_sbi.c
> > +++ b/drivers/perf/riscv_pmu_sbi.c
> > @@ -20,10 +20,21 @@
> >  #include <linux/cpu_pm.h>
> >  #include <linux/sched/clock.h>
> >  
> > -#include <asm/errata_list.h>
> >  #include <asm/sbi.h>
> >  #include <asm/hwcap.h>
> >  
> > +#define THEAD_C9XX_RV_IRQ_PMU		17
> > +#define THEAD_C9XX_CSR_SCOUNTEROF	0x5c5
> > +
> > +#define ALT_SBI_PMU_OVERFLOW(__ovl)					\
> > +asm volatile(ALTERNATIVE(						\
> > +	"csrr %0, " __stringify(CSR_SSCOUNTOVF),			\
> > +	"csrr %0, " __stringify(THEAD_C9XX_CSR_SCOUNTEROF),		\
> > +		0, RISCV_ISA_EXT_XTHEADPMU,				\
> > +		CONFIG_THEAD_CUSTOM_PMU)				\
> > +	: "=r" (__ovl) :						\
> > +	: "memory")
> > +
> >  #define SYSCTL_NO_USER_ACCESS	0
> >  #define SYSCTL_USER_ACCESS	1
> >  #define SYSCTL_LEGACY		2
> > @@ -805,7 +816,8 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
> >  	if (riscv_isa_extension_available(NULL, SSCOFPMF)) {
> >  		riscv_pmu_irq_num = RV_IRQ_PMU;
> >  		riscv_pmu_use_irq = true;
> > -	} else if (IS_ENABLED(CONFIG_ERRATA_THEAD_PMU) &&
> > +	} else if (riscv_isa_extension_available(NULL, XTHEADPMU) &&
> > +		   IS_ENABLED(CONFIG_THEAD_CUSTOM_PMU) &&
> >  		   riscv_cached_mvendorid(0) == THEAD_VENDOR_ID &&
> >  		   riscv_cached_marchid(0) == 0 &&
> >  		   riscv_cached_mimpid(0) == 0) {
> 
> Can all of the m*id checks be removed, since the firmware is now
> explicitly telling us that the T-Head PMU is supported?

I can only comfirm that boards with "allwinner,sun20i-d1" compatible
string uses the T-Head PMU device callbacks.

Thanks,
Peter Lin

> Cheers,
> Conor.



_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv