Re: [PATCH v7 2/4] riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock

From: Jisheng Zhang <jszhang@kernel.org>
To: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Drew Fustini <dfustini@baylibre.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>, Guo Ren <guoren@kernel.org>,
	Fu Wei <wefu@redhat.com>, Conor Dooley <conor@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Jason Kridner <jkridner@beagleboard.org>,
	Robert Nelson <robertcnelson@beagleboard.org>,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v7 2/4] riscv: dts: thead: Add TH1520 mmc controllers and sdhci clock
Date: Tue, 5 Dec 2023 22:26:38 +0800	[thread overview]
Message-ID: <ZW8zHoVWf94FDTx7@xhacker> (raw)
In-Reply-To: <CAJM55Z-qc7gc0fO-K8byqvpOBjDxFD4dP57mFHuijvpOzBWObQ@mail.gmail.com>

On Mon, Dec 04, 2023 at 01:47:45AM -0800, Emil Renner Berthing wrote:
> Drew Fustini wrote:
> > Add node for the SDHCI fixed clock. Add mmc0 node for the first mmc
> > controller instance which is typically connected to the eMMC device.
> > Add mmc1 node for the second mmc controller instance which is typically
> > connected to microSD slot.
> >
> > Signed-off-by: Drew Fustini <dfustini@baylibre.com>
> > ---
> >  arch/riscv/boot/dts/thead/th1520.dtsi | 25 +++++++++++++++++++++++++
> >  1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> > index ba4d2c673ac8..af4fdcd82e0b 100644
> > --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> > +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> > @@ -146,6 +146,13 @@ uart_sclk: uart-sclk-clock {
> >  		#clock-cells = <0>;
> >  	};
> >
> > +	sdhci_clk: sdhci-clock {
> > +		compatible = "fixed-clock";
> > +		clock-frequency = <198000000>;
> > +		clock-output-names = "sdhci_clk";
> > +		#clock-cells = <0>;
> > +	};
> > +
> >  	soc {
> >  		compatible = "simple-bus";
> >  		interrupt-parent = <&plic>;
> > @@ -304,6 +311,24 @@ dmac0: dma-controller@ffefc00000 {
> >  			status = "disabled";
> >  		};
> >
> > +		mmc0: mmc@ffe7080000 {
> > +			compatible = "thead,th1520-dwcmshc";
> > +			reg = <0xff 0xe7080000 0x0 0x10000>;
> > +			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&sdhci_clk>;
> > +			clock-names = "core";
> > +			status = "disabled";
> > +		};
> > +
> > +		mmc1: mmc@ffe7090000 {
> > +			compatible = "thead,th1520-dwcmshc";
> > +			reg = <0xff 0xe7090000 0x0 0x10000>;
> > +			interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&sdhci_clk>;
> > +			clock-names = "core";
> > +			status = "disabled";
> > +		};
> > +
> 
> Hi Drew,
> 
> This doesn't seem to match the documentation shared here:
> https://lore.kernel.org/linux-riscv/5f437109d2be2b8843f549a661054a2e3ec0d66e.camel@xry111.site/
> From the TH1520 System User Manual.pdf in there, I'd expect something like

> 
> 	emmc: mmc@ffe7080000 {
> 		compatible = "thead,th1520-dwcmshc";
> 		reg = <0xff 0xe7080000 0x0 0x10000>;
> 		...
> 	};

Hi Emil,

I think this isn't necessary. From other soc dts files, I see such
naming, but lots socs just use mmc0, mmc1, and so on.

And IIRC, the host for sd and sdio can support both, IOW, below
sdio0/sdio1 may be used for sdcard.

Thanks
> 
> 	sdio0: mmc@ffe7090000 {
> 		compatible = "thead,th1520-dwcmshc";
> 		reg = <0xff 0xe7090000 0x0 0x10000>;
> 		...
> 	};
> 
> 	sdio1: mmc@ffe70a0000 {
> 		compatible = "thead,th1520-dwcmshc";
> 		reg = <0xff 0xe70a0000 0x0 0x10000>;
> 		...
> 	};
> 
> /Emil

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv