[PATCH v4 00/15] Add Andes PMU extension support

[PATCH v4 00/15] Add Andes PMU extension support

[Yu Chien Peter Lin]

This patch series enables perf tool to utilize Andes PMU
extension via PMU SBI calls, provides PMU device callbacks
to achieve event sampling and mode filtering.

The last patch provides a PMU node example used on AX45MP cores.

The OpenSBI and Linux patches can be found on Andes Technology GitHub
- https://github.com/andestech/opensbi/commits/andes-pmu-support-v4
- https://github.com/andestech/linux/commits/andes-pmu-support-v4

For more details about Andes PMU extension, see Counter Related
Registers in the AX45MP datasheet:
http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf

Leo Yu-Chi Liang (1):
  lib: ipi: Adjust Andes PLICSW to single-bit-per-hart scheme

Yu Chien Peter Lin (14):
  sbi: sbi_pmu: Improve sbi_pmu_init() error handling
  lib: sbi: Add XAndesPMU in hart extensions
  sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device
  platform: include: andes45: Add PMU related CSR defines
  platform: generic: Introduce pmu_init() platform override
  platform: andes: Add Andes custom PMU support
  platform: andes: Enable Andes PMU for AE350
  platform: rzfive: Enable Andes PMU for RZ/Five
  lib: utils: fdt_fixup: Allow preserving PMU properties
  platform: andes: Factor out is_andes() helper
  lib: utils: fdt_pmu: Make the fdt_pmu_evt_select table global variable
  lib: utils: fdt_pmu: Do not iterate over the fdt_pmu_evt_select table
  platform: andes: Add Andes default PMU mapping support
  docs: pmu: Add Andes PMU node example

 docs/pmu_support.md                          |  82 ++++
 include/sbi/sbi_ecall_interface.h            |   5 +
 include/sbi/sbi_hart.h                       |   2 +
 include/sbi/sbi_pmu.h                        |   6 +
 include/sbi_utils/fdt/fdt_helper.h           |  17 +
 include/sbi_utils/fdt/fdt_pmu.h              |   6 +
 include/sbi_utils/ipi/andes_plicsw.h         |  23 +-
 lib/sbi/sbi_hart.c                           |   3 +
 lib/sbi/sbi_pmu.c                            |  26 +-
 lib/utils/fdt/Kconfig                        |   7 +
 lib/utils/fdt/fdt_fixup.c                    |   3 +
 lib/utils/fdt/fdt_pmu.c                      |  17 +-
 lib/utils/ipi/andes_plicsw.c                 | 104 ++---
 platform/generic/Kconfig                     |   4 +
 platform/generic/andes/Kconfig               |  15 +
 platform/generic/andes/ae350.c               |  19 +-
 platform/generic/andes/andes_hpm.c           | 405 +++++++++++++++++++
 platform/generic/andes/andes_pmu.c           | 105 +++++
 platform/generic/andes/objects.mk            |   2 +
 platform/generic/include/andes/andes45.h     |  32 ++
 platform/generic/include/andes/andes_hpm.h   |  81 ++++
 platform/generic/include/andes/andes_pmu.h   |  34 ++
 platform/generic/include/platform_override.h |   1 +
 platform/generic/platform.c                  |  14 +-
 platform/generic/renesas/rzfive/rzfive.c     |   5 +-
 25 files changed, 908 insertions(+), 110 deletions(-)
 create mode 100644 platform/generic/andes/andes_hpm.c
 create mode 100644 platform/generic/andes/andes_pmu.c
 create mode 100644 platform/generic/include/andes/andes_hpm.h
 create mode 100644 platform/generic/include/andes/andes_pmu.h

-- 
2.34.1

[PATCH v4 01/15] lib: ipi: Adjust Andes PLICSW to single-bit-per-hart scheme

[Yu Chien Peter Lin]

From: Leo Yu-Chi Liang <ycliang@andestech.com>

The old scheme doesn't allow sending hart0 self-IPI as the
corresponding bit on pending register is hardwired to 0, this
could lead to unhandle IPIs on SMP systems, esp. on single-core.

Furthermore, the limitation of old scheme is 8-core, instead of
reserving source hart information, we assign bit (x + 1) as the
enable and pending bit of hartx, this also expands the bootable
hart number.

The following diagram shows the enable bits of the new scheme
on 32-core Andes platform.

   Pending regs: 0x1000  x---0---0---0---0------0---0
Pending hart ID:             0   1   2   3 ... 30  31
   Interrupt ID:         0   1   2   3   4 ... 31  32
                         |   |   |   |   |      |   |
    Enable regs: 0x2000  x---1---0---0---0-...--0---0---> hart0
                         |   |   |   |   |      |   |
                 0x2080  x---0---1---0---0-...--0---0---> hart1
                         |   |   |   |   |      |   |
                 0x2100  x---0---0---1---0-...--0---0---> hart2
                         |   |   |   |   |      |   |
                 0x2180  x---0---0---0---1-...--0---0---> hart3
                         .   .   .   .   .      .   .
                         .   .   .   .   .      .   .
                         .   .   .   .   .      .   .
                 0x2f00  x---0---0---0---0-...--1---0---> hart30
                         |   |   |   |   |      |   |
                 0x2f80  x---0---0---0---0-...--0---1---> hart31
                         <-------- word 0 -------><--- word 1 --->

To send IPI to hart0, for example, another hart (including hart0
itself) will set bit 1 of first word on the pending register.

We also fix indentation in andes_plicsw.h along with this patch.

Fixes: ce7c490719ed ("lib: utils/ipi: Add Andes fdt ipi driver support")
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Randolph <randolph@andestech.com>
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005665.html
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v2 -> v3:
  - New patch
Changes v3 -> v4:
  - Include Prabhakar's RB & TB tags
---
 include/sbi_utils/ipi/andes_plicsw.h |  23 +++---
 lib/utils/ipi/andes_plicsw.c         | 104 ++++++++++-----------------
 2 files changed, 46 insertions(+), 81 deletions(-)

diff --git a/include/sbi_utils/ipi/andes_plicsw.h b/include/sbi_utils/ipi/andes_plicsw.h
index e93cda0..0d18444 100644
--- a/include/sbi_utils/ipi/andes_plicsw.h
+++ b/include/sbi_utils/ipi/andes_plicsw.h
@@ -13,30 +13,23 @@
 #ifndef _IPI_ANDES_PLICSW_H_
 #define _IPI_ANDES_PLICSW_H_
 
-#define PLICSW_PRIORITY_BASE 0x4
+#define PLICSW_PRIORITY_BASE	0x4
 
-#define PLICSW_PENDING_BASE 0x1000
-#define PLICSW_PENDING_STRIDE 0x8
+#define PLICSW_PENDING_BASE	0x1000
 
-#define PLICSW_ENABLE_BASE 0x2000
-#define PLICSW_ENABLE_STRIDE 0x80
+#define PLICSW_ENABLE_BASE	0x2000
+#define PLICSW_ENABLE_STRIDE	0x80
 
-#define PLICSW_CONTEXT_BASE 0x200000
-#define PLICSW_CONTEXT_STRIDE 0x1000
-#define PLICSW_CONTEXT_CLAIM 0x4
+#define PLICSW_CONTEXT_BASE	0x200000
+#define PLICSW_CONTEXT_STRIDE	0x1000
+#define PLICSW_CONTEXT_CLAIM	0x4
 
-#define PLICSW_HART_MASK 0x01010101
-
-#define PLICSW_HART_MAX_NR 8
-
-#define PLICSW_REGION_ALIGN 0x1000
+#define PLICSW_REGION_ALIGN	0x1000
 
 struct plicsw_data {
 	unsigned long addr;
 	unsigned long size;
 	uint32_t hart_count;
-	/* hart id to source id table */
-	uint32_t source_id[PLICSW_HART_MAX_NR];
 };
 
 int plicsw_warm_ipi_init(void);
diff --git a/lib/utils/ipi/andes_plicsw.c b/lib/utils/ipi/andes_plicsw.c
index 5693efb..413ac20 100644
--- a/lib/utils/ipi/andes_plicsw.c
+++ b/lib/utils/ipi/andes_plicsw.c
@@ -18,77 +18,45 @@
 
 struct plicsw_data plicsw;
 
-static inline void plicsw_claim(void)
+static void plicsw_ipi_send(u32 hart_index)
 {
-	u32 hartid = current_hartid();
+	ulong pending_reg;
+	u32 interrupt_id, word_index, pending_bit;
+	u32 target_hart = sbi_hartindex_to_hartid(hart_index);
 
-	if (plicsw.hart_count <= hartid)
+	if (plicsw.hart_count <= target_hart)
 		ebreak();
 
-	plicsw.source_id[hartid] =
-		readl((void *)plicsw.addr + PLICSW_CONTEXT_BASE +
-		      PLICSW_CONTEXT_CLAIM + PLICSW_CONTEXT_STRIDE * hartid);
-}
-
-static inline void plicsw_complete(void)
-{
-	u32 hartid = current_hartid();
-	u32 source = plicsw.source_id[hartid];
-
-	writel(source, (void *)plicsw.addr + PLICSW_CONTEXT_BASE +
-			       PLICSW_CONTEXT_CLAIM +
-			       PLICSW_CONTEXT_STRIDE * hartid);
-}
-
-static inline void plic_sw_pending(u32 target_hart)
-{
 	/*
-	 * The pending array registers are w1s type.
-	 * IPI pending array mapping as following:
-	 *
-	 * Pending array start address: base + 0x1000
-	 * ---------------------------------
-	 * | hart3 | hart2 | hart1 | hart0 |
-	 * ---------------------------------
-	 * Each hartX can send IPI to another hart by setting the
-	 * bitY to its own region (see the below).
-	 *
-	 * In each hartX region:
-	 * <---------- PICSW_PENDING_STRIDE -------->
-	 * | bit7 | ... | bit3 | bit2 | bit1 | bit0 |
-	 * ------------------------------------------
-	 * The bitY of hartX region indicates that hartX sends an
-	 * IPI to hartY.
+	 * We assign a single bit for each hart.
+	 * Bit 0 is hardwired to 0, thus unavailable.
+	 * Bit(X+1) indicates that IPI is sent to hartX.
 	 */
-	u32 hartid	    = current_hartid();
-	u32 word_index	    = hartid / 4;
-	u32 per_hart_offset = PLICSW_PENDING_STRIDE * hartid;
-	u32 val		    = 1 << target_hart << per_hart_offset;
+	interrupt_id = target_hart + 1;
+	word_index   = interrupt_id / 32;
+	pending_bit  = interrupt_id % 32;
+	pending_reg  = plicsw.addr + PLICSW_PENDING_BASE + word_index * 4;
 
-	writel(val, (void *)plicsw.addr + PLICSW_PENDING_BASE + word_index * 4);
+	/* Set target hart's mip.MSIP */
+	writel_relaxed(BIT(pending_bit), (void *)pending_reg);
 }
 
-static void plicsw_ipi_send(u32 hart_index)
+static void plicsw_ipi_clear(u32 hart_index)
 {
 	u32 target_hart = sbi_hartindex_to_hartid(hart_index);
+	ulong reg = plicsw.addr + PLICSW_CONTEXT_BASE + PLICSW_CONTEXT_CLAIM +
+		    PLICSW_CONTEXT_STRIDE * target_hart;
 
 	if (plicsw.hart_count <= target_hart)
 		ebreak();
 
-	/* Set PLICSW IPI */
-	plic_sw_pending(target_hart);
-}
+	/* Claim */
+	u32 source = readl((void *)reg);
 
-static void plicsw_ipi_clear(u32 hart_index)
-{
-	u32 target_hart = sbi_hartindex_to_hartid(hart_index);
-
-	if (plicsw.hart_count <= target_hart)
-		ebreak();
+	/* A successful claim will clear mip.MSIP */
 
-	/* Clear PLICSW IPI */
-	plicsw_claim();
-	plicsw_complete();
+	/* Complete */
+	writel(source, (void *)reg);
 }
 
 static struct sbi_ipi_device plicsw_ipi = {
@@ -110,22 +78,26 @@ int plicsw_warm_ipi_init(void)
 int plicsw_cold_ipi_init(struct plicsw_data *plicsw)
 {
 	int rc;
+	u32 interrupt_id, word_index, enable_bit;
+	ulong enable_reg, priority_reg;
 
 	/* Setup source priority */
-	uint32_t *priority = (void *)plicsw->addr + PLICSW_PRIORITY_BASE;
-
-	for (int i = 0; i < plicsw->hart_count; i++)
-		writel(1, &priority[i]);
-
-	/* Setup target enable */
-	uint32_t enable_mask = PLICSW_HART_MASK;
+	for (int i = 0; i < plicsw->hart_count; i++) {
+		priority_reg = plicsw->addr + PLICSW_PRIORITY_BASE + i * 4;
+		writel(1, (void *)priority_reg);
+	}
 
+	/*
+	 * Setup enable for each hart, skip non-existent interrupt ID 0
+	 * which is hardwired to 0.
+	 */
 	for (int i = 0; i < plicsw->hart_count; i++) {
-		uint32_t *enable = (void *)plicsw->addr + PLICSW_ENABLE_BASE +
-				   PLICSW_ENABLE_STRIDE * i;
-		writel(enable_mask, enable);
-		writel(enable_mask, enable + 1);
-		enable_mask <<= 1;
+		interrupt_id = i + 1;
+		word_index   = interrupt_id / 32;
+		enable_bit   = interrupt_id % 32;
+		enable_reg   = plicsw->addr + PLICSW_ENABLE_BASE +
+			       PLICSW_ENABLE_STRIDE * i + 4 * word_index;
+		writel(BIT(enable_bit), (void *)enable_reg);
 	}
 
 	/* Add PLICSW region to the root domain */
-- 
2.34.1

[PATCH v4 01/15] lib: ipi: Adjust Andes PLICSW to single-bit-per-hart scheme

[Anup Patel]

On Thu, Nov 30, 2023 at 6:12?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> From: Leo Yu-Chi Liang <ycliang@andestech.com>
>
> The old scheme doesn't allow sending hart0 self-IPI as the
> corresponding bit on pending register is hardwired to 0, this
> could lead to unhandle IPIs on SMP systems, esp. on single-core.
>
> Furthermore, the limitation of old scheme is 8-core, instead of
> reserving source hart information, we assign bit (x + 1) as the
> enable and pending bit of hartx, this also expands the bootable
> hart number.
>
> The following diagram shows the enable bits of the new scheme
> on 32-core Andes platform.
>
>    Pending regs: 0x1000  x---0---0---0---0------0---0
> Pending hart ID:             0   1   2   3 ... 30  31
>    Interrupt ID:         0   1   2   3   4 ... 31  32
>                          |   |   |   |   |      |   |
>     Enable regs: 0x2000  x---1---0---0---0-...--0---0---> hart0
>                          |   |   |   |   |      |   |
>                  0x2080  x---0---1---0---0-...--0---0---> hart1
>                          |   |   |   |   |      |   |
>                  0x2100  x---0---0---1---0-...--0---0---> hart2
>                          |   |   |   |   |      |   |
>                  0x2180  x---0---0---0---1-...--0---0---> hart3
>                          .   .   .   .   .      .   .
>                          .   .   .   .   .      .   .
>                          .   .   .   .   .      .   .
>                  0x2f00  x---0---0---0---0-...--1---0---> hart30
>                          |   |   |   |   |      |   |
>                  0x2f80  x---0---0---0---0-...--0---1---> hart31
>                          <-------- word 0 -------><--- word 1 --->
>
> To send IPI to hart0, for example, another hart (including hart0
> itself) will set bit 1 of first word on the pending register.
>
> We also fix indentation in andes_plicsw.h along with this patch.
>
> Fixes: ce7c490719ed ("lib: utils/ipi: Add Andes fdt ipi driver support")
> Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
> Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Randolph <randolph@andestech.com>
> Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005665.html
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

> ---
> Changes v2 -> v3:
>   - New patch
> Changes v3 -> v4:
>   - Include Prabhakar's RB & TB tags
> ---
>  include/sbi_utils/ipi/andes_plicsw.h |  23 +++---
>  lib/utils/ipi/andes_plicsw.c         | 104 ++++++++++-----------------
>  2 files changed, 46 insertions(+), 81 deletions(-)
>
> diff --git a/include/sbi_utils/ipi/andes_plicsw.h b/include/sbi_utils/ipi/andes_plicsw.h
> index e93cda0..0d18444 100644
> --- a/include/sbi_utils/ipi/andes_plicsw.h
> +++ b/include/sbi_utils/ipi/andes_plicsw.h
> @@ -13,30 +13,23 @@
>  #ifndef _IPI_ANDES_PLICSW_H_
>  #define _IPI_ANDES_PLICSW_H_
>
> -#define PLICSW_PRIORITY_BASE 0x4
> +#define PLICSW_PRIORITY_BASE   0x4
>
> -#define PLICSW_PENDING_BASE 0x1000
> -#define PLICSW_PENDING_STRIDE 0x8
> +#define PLICSW_PENDING_BASE    0x1000
>
> -#define PLICSW_ENABLE_BASE 0x2000
> -#define PLICSW_ENABLE_STRIDE 0x80
> +#define PLICSW_ENABLE_BASE     0x2000
> +#define PLICSW_ENABLE_STRIDE   0x80
>
> -#define PLICSW_CONTEXT_BASE 0x200000
> -#define PLICSW_CONTEXT_STRIDE 0x1000
> -#define PLICSW_CONTEXT_CLAIM 0x4
> +#define PLICSW_CONTEXT_BASE    0x200000
> +#define PLICSW_CONTEXT_STRIDE  0x1000
> +#define PLICSW_CONTEXT_CLAIM   0x4
>
> -#define PLICSW_HART_MASK 0x01010101
> -
> -#define PLICSW_HART_MAX_NR 8
> -
> -#define PLICSW_REGION_ALIGN 0x1000
> +#define PLICSW_REGION_ALIGN    0x1000
>
>  struct plicsw_data {
>         unsigned long addr;
>         unsigned long size;
>         uint32_t hart_count;
> -       /* hart id to source id table */
> -       uint32_t source_id[PLICSW_HART_MAX_NR];
>  };
>
>  int plicsw_warm_ipi_init(void);
> diff --git a/lib/utils/ipi/andes_plicsw.c b/lib/utils/ipi/andes_plicsw.c
> index 5693efb..413ac20 100644
> --- a/lib/utils/ipi/andes_plicsw.c
> +++ b/lib/utils/ipi/andes_plicsw.c
> @@ -18,77 +18,45 @@
>
>  struct plicsw_data plicsw;
>
> -static inline void plicsw_claim(void)
> +static void plicsw_ipi_send(u32 hart_index)
>  {
> -       u32 hartid = current_hartid();
> +       ulong pending_reg;
> +       u32 interrupt_id, word_index, pending_bit;
> +       u32 target_hart = sbi_hartindex_to_hartid(hart_index);
>
> -       if (plicsw.hart_count <= hartid)
> +       if (plicsw.hart_count <= target_hart)
>                 ebreak();
>
> -       plicsw.source_id[hartid] =
> -               readl((void *)plicsw.addr + PLICSW_CONTEXT_BASE +
> -                     PLICSW_CONTEXT_CLAIM + PLICSW_CONTEXT_STRIDE * hartid);
> -}
> -
> -static inline void plicsw_complete(void)
> -{
> -       u32 hartid = current_hartid();
> -       u32 source = plicsw.source_id[hartid];
> -
> -       writel(source, (void *)plicsw.addr + PLICSW_CONTEXT_BASE +
> -                              PLICSW_CONTEXT_CLAIM +
> -                              PLICSW_CONTEXT_STRIDE * hartid);
> -}
> -
> -static inline void plic_sw_pending(u32 target_hart)
> -{
>         /*
> -        * The pending array registers are w1s type.
> -        * IPI pending array mapping as following:
> -        *
> -        * Pending array start address: base + 0x1000
> -        * ---------------------------------
> -        * | hart3 | hart2 | hart1 | hart0 |
> -        * ---------------------------------
> -        * Each hartX can send IPI to another hart by setting the
> -        * bitY to its own region (see the below).
> -        *
> -        * In each hartX region:
> -        * <---------- PICSW_PENDING_STRIDE -------->
> -        * | bit7 | ... | bit3 | bit2 | bit1 | bit0 |
> -        * ------------------------------------------
> -        * The bitY of hartX region indicates that hartX sends an
> -        * IPI to hartY.
> +        * We assign a single bit for each hart.
> +        * Bit 0 is hardwired to 0, thus unavailable.
> +        * Bit(X+1) indicates that IPI is sent to hartX.
>          */
> -       u32 hartid          = current_hartid();
> -       u32 word_index      = hartid / 4;
> -       u32 per_hart_offset = PLICSW_PENDING_STRIDE * hartid;
> -       u32 val             = 1 << target_hart << per_hart_offset;
> +       interrupt_id = target_hart + 1;
> +       word_index   = interrupt_id / 32;
> +       pending_bit  = interrupt_id % 32;
> +       pending_reg  = plicsw.addr + PLICSW_PENDING_BASE + word_index * 4;
>
> -       writel(val, (void *)plicsw.addr + PLICSW_PENDING_BASE + word_index * 4);
> +       /* Set target hart's mip.MSIP */
> +       writel_relaxed(BIT(pending_bit), (void *)pending_reg);
>  }
>
> -static void plicsw_ipi_send(u32 hart_index)
> +static void plicsw_ipi_clear(u32 hart_index)
>  {
>         u32 target_hart = sbi_hartindex_to_hartid(hart_index);
> +       ulong reg = plicsw.addr + PLICSW_CONTEXT_BASE + PLICSW_CONTEXT_CLAIM +
> +                   PLICSW_CONTEXT_STRIDE * target_hart;
>
>         if (plicsw.hart_count <= target_hart)
>                 ebreak();
>
> -       /* Set PLICSW IPI */
> -       plic_sw_pending(target_hart);
> -}
> +       /* Claim */
> +       u32 source = readl((void *)reg);
>
> -static void plicsw_ipi_clear(u32 hart_index)
> -{
> -       u32 target_hart = sbi_hartindex_to_hartid(hart_index);
> -
> -       if (plicsw.hart_count <= target_hart)
> -               ebreak();
> +       /* A successful claim will clear mip.MSIP */
>
> -       /* Clear PLICSW IPI */
> -       plicsw_claim();
> -       plicsw_complete();
> +       /* Complete */
> +       writel(source, (void *)reg);
>  }
>
>  static struct sbi_ipi_device plicsw_ipi = {
> @@ -110,22 +78,26 @@ int plicsw_warm_ipi_init(void)
>  int plicsw_cold_ipi_init(struct plicsw_data *plicsw)
>  {
>         int rc;
> +       u32 interrupt_id, word_index, enable_bit;
> +       ulong enable_reg, priority_reg;
>
>         /* Setup source priority */
> -       uint32_t *priority = (void *)plicsw->addr + PLICSW_PRIORITY_BASE;
> -
> -       for (int i = 0; i < plicsw->hart_count; i++)
> -               writel(1, &priority[i]);
> -
> -       /* Setup target enable */
> -       uint32_t enable_mask = PLICSW_HART_MASK;
> +       for (int i = 0; i < plicsw->hart_count; i++) {
> +               priority_reg = plicsw->addr + PLICSW_PRIORITY_BASE + i * 4;
> +               writel(1, (void *)priority_reg);
> +       }
>
> +       /*
> +        * Setup enable for each hart, skip non-existent interrupt ID 0
> +        * which is hardwired to 0.
> +        */
>         for (int i = 0; i < plicsw->hart_count; i++) {
> -               uint32_t *enable = (void *)plicsw->addr + PLICSW_ENABLE_BASE +
> -                                  PLICSW_ENABLE_STRIDE * i;
> -               writel(enable_mask, enable);
> -               writel(enable_mask, enable + 1);
> -               enable_mask <<= 1;
> +               interrupt_id = i + 1;
> +               word_index   = interrupt_id / 32;
> +               enable_bit   = interrupt_id % 32;
> +               enable_reg   = plicsw->addr + PLICSW_ENABLE_BASE +
> +                              PLICSW_ENABLE_STRIDE * i + 4 * word_index;
> +               writel(BIT(enable_bit), (void *)enable_reg);
>         }
>
>         /* Add PLICSW region to the root domain */
> --
> 2.34.1
>

[PATCH v4 02/15] sbi: sbi_pmu: Improve sbi_pmu_init() error handling

[Yu Chien Peter Lin]

This patch makes the following changes:

- As sbi_platform_pmu_init() returns a negative error code on
  failure, let sbi_pmu_init() print out the error code with
  sbi_dprintf().

- In order to distinguish the SBI_EFAIL error returned by
  sbi_pmu_add_*_counter_map(), return SBI_ENOENT to indicate
  that fdt_pmu_setup() failed to locate "riscv,pmu" node, and
  generic_pmu_init() ignores such case.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v1 -> v2:
  - New patch
Changes v2 -> v3:
  - Include Anup's RB tag
Changes v3 -> v4:
  - Use sbi_dprintf() instead of hang on error
  - Include Prabhakar's RB tag
---
 lib/sbi/sbi_pmu.c           | 6 +++++-
 lib/utils/fdt/fdt_pmu.c     | 2 +-
 platform/generic/platform.c | 8 +++++++-
 3 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
index 185068b..2ee6e62 100644
--- a/lib/sbi/sbi_pmu.c
+++ b/lib/sbi/sbi_pmu.c
@@ -957,6 +957,7 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)
 	int hpm_count = sbi_fls(sbi_hart_mhpm_mask(scratch));
 	struct sbi_pmu_hart_state *phs;
 	const struct sbi_platform *plat;
+	int rc;
 
 	if (cold_boot) {
 		hw_event_map = sbi_calloc(sizeof(*hw_event_map),
@@ -972,7 +973,10 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)
 
 		plat = sbi_platform_ptr(scratch);
 		/* Initialize hw pmu events */
-		sbi_platform_pmu_init(plat);
+		rc = sbi_platform_pmu_init(plat);
+		if (rc)
+			sbi_dprintf("%s: platform pmu init failed "
+				    "(error %d)\n", __func__, rc);
 
 		/* mcycle & minstret is available always */
 		if (!hpm_count)
diff --git a/lib/utils/fdt/fdt_pmu.c b/lib/utils/fdt/fdt_pmu.c
index 83301bb..a8d7648 100644
--- a/lib/utils/fdt/fdt_pmu.c
+++ b/lib/utils/fdt/fdt_pmu.c
@@ -74,7 +74,7 @@ int fdt_pmu_setup(void *fdt)
 
 	pmu_offset = fdt_node_offset_by_compatible(fdt, -1, "riscv,pmu");
 	if (pmu_offset < 0)
-		return SBI_EFAIL;
+		return SBI_ENOENT;
 
 	event_ctr_map = fdt_getprop(fdt, pmu_offset,
 				    "riscv,event-to-mhpmcounters", &len);
diff --git a/platform/generic/platform.c b/platform/generic/platform.c
index 85acecd..fa400b9 100644
--- a/platform/generic/platform.c
+++ b/platform/generic/platform.c
@@ -265,7 +265,13 @@ static u32 generic_tlb_num_entries(void)
 
 static int generic_pmu_init(void)
 {
-	return fdt_pmu_setup(fdt_get_address());
+	int rc;
+
+	rc = fdt_pmu_setup(fdt_get_address());
+	if (rc && rc != SBI_ENOENT)
+		return rc;
+
+	return 0;
 }
 
 static uint64_t generic_pmu_xlate_to_mhpmevent(uint32_t event_idx,
-- 
2.34.1

[PATCH v4 02/15] sbi: sbi_pmu: Improve sbi_pmu_init() error handling

[Atish Patra]

On Thu, Nov 30, 2023 at 4:42?AM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> This patch makes the following changes:
>
> - As sbi_platform_pmu_init() returns a negative error code on
>   failure, let sbi_pmu_init() print out the error code with
>   sbi_dprintf().
>
> - In order to distinguish the SBI_EFAIL error returned by
>   sbi_pmu_add_*_counter_map(), return SBI_ENOENT to indicate
>   that fdt_pmu_setup() failed to locate "riscv,pmu" node, and
>   generic_pmu_init() ignores such case.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Anup Patel <anup@brainfault.org>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> Changes v1 -> v2:
>   - New patch
> Changes v2 -> v3:
>   - Include Anup's RB tag
> Changes v3 -> v4:
>   - Use sbi_dprintf() instead of hang on error
>   - Include Prabhakar's RB tag
> ---
>  lib/sbi/sbi_pmu.c           | 6 +++++-
>  lib/utils/fdt/fdt_pmu.c     | 2 +-
>  platform/generic/platform.c | 8 +++++++-
>  3 files changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
> index 185068b..2ee6e62 100644
> --- a/lib/sbi/sbi_pmu.c
> +++ b/lib/sbi/sbi_pmu.c
> @@ -957,6 +957,7 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)
>         int hpm_count = sbi_fls(sbi_hart_mhpm_mask(scratch));
>         struct sbi_pmu_hart_state *phs;
>         const struct sbi_platform *plat;
> +       int rc;
>
>         if (cold_boot) {
>                 hw_event_map = sbi_calloc(sizeof(*hw_event_map),
> @@ -972,7 +973,10 @@ int sbi_pmu_init(struct sbi_scratch *scratch, bool cold_boot)
>
>                 plat = sbi_platform_ptr(scratch);
>                 /* Initialize hw pmu events */
> -               sbi_platform_pmu_init(plat);
> +               rc = sbi_platform_pmu_init(plat);
> +               if (rc)
> +                       sbi_dprintf("%s: platform pmu init failed "
> +                                   "(error %d)\n", __func__, rc);
>
>                 /* mcycle & minstret is available always */
>                 if (!hpm_count)
> diff --git a/lib/utils/fdt/fdt_pmu.c b/lib/utils/fdt/fdt_pmu.c
> index 83301bb..a8d7648 100644
> --- a/lib/utils/fdt/fdt_pmu.c
> +++ b/lib/utils/fdt/fdt_pmu.c
> @@ -74,7 +74,7 @@ int fdt_pmu_setup(void *fdt)
>
>         pmu_offset = fdt_node_offset_by_compatible(fdt, -1, "riscv,pmu");
>         if (pmu_offset < 0)
> -               return SBI_EFAIL;
> +               return SBI_ENOENT;
>
>         event_ctr_map = fdt_getprop(fdt, pmu_offset,
>                                     "riscv,event-to-mhpmcounters", &len);
> diff --git a/platform/generic/platform.c b/platform/generic/platform.c
> index 85acecd..fa400b9 100644
> --- a/platform/generic/platform.c
> +++ b/platform/generic/platform.c
> @@ -265,7 +265,13 @@ static u32 generic_tlb_num_entries(void)
>
>  static int generic_pmu_init(void)
>  {
> -       return fdt_pmu_setup(fdt_get_address());
> +       int rc;
> +
> +       rc = fdt_pmu_setup(fdt_get_address());
> +       if (rc && rc != SBI_ENOENT)
> +               return rc;
> +
> +       return 0;
>  }
>
>  static uint64_t generic_pmu_xlate_to_mhpmevent(uint32_t event_idx,
> --
> 2.34.1
>


Reviewed-by: Atish Patra <atishp@rivosinc.com>
-- 
Regards,
Atish

[PATCH v4 03/15] lib: sbi: Add XAndesPMU in hart extensions

[Yu Chien Peter Lin]

Add the custom extension to hart extension list.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v2 -> v3:
  - New patch
Changes v3 -> v4:
  - Include RB tags
---
 include/sbi/sbi_hart.h | 2 ++
 lib/sbi/sbi_hart.c     | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/include/sbi/sbi_hart.h b/include/sbi/sbi_hart.h
index 6ee49ff..811e5f5 100644
--- a/include/sbi/sbi_hart.h
+++ b/include/sbi/sbi_hart.h
@@ -45,6 +45,8 @@ enum sbi_hart_extensions {
 	SBI_HART_EXT_ZKR,
 	/** Hart has Smcntrpmf extension */
 	SBI_HART_EXT_SMCNTRPMF,
+	/** Hart has Xandespmu extension */
+	SBI_HART_EXT_XANDESPMU,
 
 	/** Maximum index of Hart extension */
 	SBI_HART_EXT_MAX,
diff --git a/lib/sbi/sbi_hart.c b/lib/sbi/sbi_hart.c
index bf8792a..c948373 100644
--- a/lib/sbi/sbi_hart.c
+++ b/lib/sbi/sbi_hart.c
@@ -694,6 +694,9 @@ static inline char *sbi_hart_extension_id2string(int ext)
 	case SBI_HART_EXT_SMCNTRPMF:
 		estr = "smcntrpmf";
 		break;
+	case SBI_HART_EXT_XANDESPMU:
+		estr = "xandespmu";
+		break;
 	default:
 		break;
 	}
-- 
2.34.1

[PATCH v4 03/15] lib: sbi: Add XAndesPMU in hart extensions

[Anup Patel]

On Thu, Nov 30, 2023 at 6:12?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> Add the custom extension to hart extension list.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Atish Patra <atishp@rivosinc.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

> ---
> Changes v2 -> v3:
>   - New patch
> Changes v3 -> v4:
>   - Include RB tags
> ---
>  include/sbi/sbi_hart.h | 2 ++
>  lib/sbi/sbi_hart.c     | 3 +++
>  2 files changed, 5 insertions(+)
>
> diff --git a/include/sbi/sbi_hart.h b/include/sbi/sbi_hart.h
> index 6ee49ff..811e5f5 100644
> --- a/include/sbi/sbi_hart.h
> +++ b/include/sbi/sbi_hart.h
> @@ -45,6 +45,8 @@ enum sbi_hart_extensions {
>         SBI_HART_EXT_ZKR,
>         /** Hart has Smcntrpmf extension */
>         SBI_HART_EXT_SMCNTRPMF,
> +       /** Hart has Xandespmu extension */
> +       SBI_HART_EXT_XANDESPMU,
>
>         /** Maximum index of Hart extension */
>         SBI_HART_EXT_MAX,
> diff --git a/lib/sbi/sbi_hart.c b/lib/sbi/sbi_hart.c
> index bf8792a..c948373 100644
> --- a/lib/sbi/sbi_hart.c
> +++ b/lib/sbi/sbi_hart.c
> @@ -694,6 +694,9 @@ static inline char *sbi_hart_extension_id2string(int ext)
>         case SBI_HART_EXT_SMCNTRPMF:
>                 estr = "smcntrpmf";
>                 break;
> +       case SBI_HART_EXT_XANDESPMU:
> +               estr = "xandespmu";
> +               break;
>         default:
>                 break;
>         }
> --
> 2.34.1
>

[PATCH v4 04/15] sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device

[Yu Chien Peter Lin]

Add support for custom PMU extensions to set inhibit bits
on custom CSRs by introducing the PMU device callback
hw_counter_filter_mode(). This allows the perf tool to
restrict event counting under a specified privileged
mode by appending a modifier, e.g. perf record -e event:k
to count events only happening in kernel mode.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
---
Changes v1 -> v2:
  - No change
Changes v2 -> v3:
  - Add pmu_dev->hw_counter_filter_mode() in pmu_fixed_ctr_update_inhibit_bits()
Changes v3 -> v4:
  - Check pmu_dev->hw_counter_filter_mode() instead of custom extension
    in pmu_fixed_ctr_update_inhibit_bits()
---
 include/sbi/sbi_pmu.h |  6 ++++++
 lib/sbi/sbi_pmu.c     | 20 ++++++++++++++------
 2 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/include/sbi/sbi_pmu.h b/include/sbi/sbi_pmu.h
index 16f6877..d63149c 100644
--- a/include/sbi/sbi_pmu.h
+++ b/include/sbi/sbi_pmu.h
@@ -89,6 +89,12 @@ struct sbi_pmu_device {
 	 * Custom function returning the machine-specific irq-bit.
 	 */
 	int (*hw_counter_irq_bit)(void);
+
+	/**
+	 * Custom function to inhibit counting of events while in
+	 * specified mode.
+	 */
+	void (*hw_counter_filter_mode)(unsigned long flags, int counter_index);
 };
 
 /** Get the PMU platform device */
diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
index 2ee6e62..4b0f5be 100644
--- a/lib/sbi/sbi_pmu.c
+++ b/lib/sbi/sbi_pmu.c
@@ -599,7 +599,10 @@ static int pmu_update_hw_mhpmevent(struct sbi_pmu_hw_event *hw_evt, int ctr_idx,
 		pmu_dev->hw_counter_disable_irq(ctr_idx);
 
 	/* Update the inhibit flags based on inhibit flags received from supervisor */
-	pmu_update_inhibit_flags(flags, &mhpmevent_val);
+	if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SSCOFPMF))
+		pmu_update_inhibit_flags(flags, &mhpmevent_val);
+	if (pmu_dev && pmu_dev->hw_counter_filter_mode)
+		pmu_dev->hw_counter_filter_mode(flags, ctr_idx);
 
 #if __riscv_xlen == 32
 	csr_write_num(CSR_MHPMEVENT3 + ctr_idx - 3, mhpmevent_val & 0xFFFFFFFF);
@@ -620,7 +623,8 @@ static int pmu_fixed_ctr_update_inhibit_bits(int fixed_ctr, unsigned long flags)
 #if __riscv_xlen == 32
 	uint64_t cfgh_csr_no;
 #endif
-	if (!sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF))
+	if (!sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF) &&
+		!(pmu_dev && pmu_dev->hw_counter_filter_mode))
 		return fixed_ctr;
 
 	switch (fixed_ctr) {
@@ -641,13 +645,17 @@ static int pmu_fixed_ctr_update_inhibit_bits(int fixed_ctr, unsigned long flags)
 	}
 
 	cfg_val |= MHPMEVENT_MINH;
-	pmu_update_inhibit_flags(flags, &cfg_val);
+	if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF)) {
+		pmu_update_inhibit_flags(flags, &cfg_val);
 #if __riscv_xlen == 32
-	csr_write_num(cfg_csr_no, cfg_val & 0xFFFFFFFF);
-	csr_write_num(cfgh_csr_no, cfg_val >> BITS_PER_LONG);
+		csr_write_num(cfg_csr_no, cfg_val & 0xFFFFFFFF);
+		csr_write_num(cfgh_csr_no, cfg_val >> BITS_PER_LONG);
 #else
-	csr_write_num(cfg_csr_no, cfg_val);
+		csr_write_num(cfg_csr_no, cfg_val);
 #endif
+	}
+	if (pmu_dev && pmu_dev->hw_counter_filter_mode)
+		pmu_dev->hw_counter_filter_mode(flags, fixed_ctr);
 	return fixed_ctr;
 }
 
-- 
2.34.1

[PATCH v4 04/15] sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device

[Atish Patra]

On Thu, Nov 30, 2023 at 4:42?AM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> Add support for custom PMU extensions to set inhibit bits
> on custom CSRs by introducing the PMU device callback
> hw_counter_filter_mode(). This allows the perf tool to
> restrict event counting under a specified privileged
> mode by appending a modifier, e.g. perf record -e event:k
> to count events only happening in kernel mode.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
> ---
> Changes v1 -> v2:
>   - No change
> Changes v2 -> v3:
>   - Add pmu_dev->hw_counter_filter_mode() in pmu_fixed_ctr_update_inhibit_bits()
> Changes v3 -> v4:
>   - Check pmu_dev->hw_counter_filter_mode() instead of custom extension
>     in pmu_fixed_ctr_update_inhibit_bits()
> ---
>  include/sbi/sbi_pmu.h |  6 ++++++
>  lib/sbi/sbi_pmu.c     | 20 ++++++++++++++------
>  2 files changed, 20 insertions(+), 6 deletions(-)
>
> diff --git a/include/sbi/sbi_pmu.h b/include/sbi/sbi_pmu.h
> index 16f6877..d63149c 100644
> --- a/include/sbi/sbi_pmu.h
> +++ b/include/sbi/sbi_pmu.h
> @@ -89,6 +89,12 @@ struct sbi_pmu_device {
>          * Custom function returning the machine-specific irq-bit.
>          */
>         int (*hw_counter_irq_bit)(void);
> +
> +       /**
> +        * Custom function to inhibit counting of events while in
> +        * specified mode.
> +        */
> +       void (*hw_counter_filter_mode)(unsigned long flags, int counter_index);
>  };
>
>  /** Get the PMU platform device */
> diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
> index 2ee6e62..4b0f5be 100644
> --- a/lib/sbi/sbi_pmu.c
> +++ b/lib/sbi/sbi_pmu.c
> @@ -599,7 +599,10 @@ static int pmu_update_hw_mhpmevent(struct sbi_pmu_hw_event *hw_evt, int ctr_idx,
>                 pmu_dev->hw_counter_disable_irq(ctr_idx);
>
>         /* Update the inhibit flags based on inhibit flags received from supervisor */
> -       pmu_update_inhibit_flags(flags, &mhpmevent_val);
> +       if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SSCOFPMF))
> +               pmu_update_inhibit_flags(flags, &mhpmevent_val);
> +       if (pmu_dev && pmu_dev->hw_counter_filter_mode)
> +               pmu_dev->hw_counter_filter_mode(flags, ctr_idx);
>
>  #if __riscv_xlen == 32
>         csr_write_num(CSR_MHPMEVENT3 + ctr_idx - 3, mhpmevent_val & 0xFFFFFFFF);
> @@ -620,7 +623,8 @@ static int pmu_fixed_ctr_update_inhibit_bits(int fixed_ctr, unsigned long flags)
>  #if __riscv_xlen == 32
>         uint64_t cfgh_csr_no;
>  #endif
> -       if (!sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF))
> +       if (!sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF) &&
> +               !(pmu_dev && pmu_dev->hw_counter_filter_mode))
>                 return fixed_ctr;
>
>         switch (fixed_ctr) {
> @@ -641,13 +645,17 @@ static int pmu_fixed_ctr_update_inhibit_bits(int fixed_ctr, unsigned long flags)
>         }
>
>         cfg_val |= MHPMEVENT_MINH;
> -       pmu_update_inhibit_flags(flags, &cfg_val);
> +       if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF)) {
> +               pmu_update_inhibit_flags(flags, &cfg_val);
>  #if __riscv_xlen == 32
> -       csr_write_num(cfg_csr_no, cfg_val & 0xFFFFFFFF);
> -       csr_write_num(cfgh_csr_no, cfg_val >> BITS_PER_LONG);
> +               csr_write_num(cfg_csr_no, cfg_val & 0xFFFFFFFF);
> +               csr_write_num(cfgh_csr_no, cfg_val >> BITS_PER_LONG);
>  #else
> -       csr_write_num(cfg_csr_no, cfg_val);
> +               csr_write_num(cfg_csr_no, cfg_val);
>  #endif
> +       }
> +       if (pmu_dev && pmu_dev->hw_counter_filter_mode)
> +               pmu_dev->hw_counter_filter_mode(flags, fixed_ctr);
>         return fixed_ctr;
>  }
>
> --
> 2.34.1
>


Reviewed-by: Atish Patra <atishp@rivosinc.com>

-- 
Regards,
Atish

[PATCH v4 04/15] sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device

[Anup Patel]

On Thu, Nov 30, 2023 at 6:12?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> Add support for custom PMU extensions to set inhibit bits
> on custom CSRs by introducing the PMU device callback
> hw_counter_filter_mode(). This allows the perf tool to
> restrict event counting under a specified privileged
> mode by appending a modifier, e.g. perf record -e event:k
> to count events only happening in kernel mode.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

Looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

> ---
> Changes v1 -> v2:
>   - No change
> Changes v2 -> v3:
>   - Add pmu_dev->hw_counter_filter_mode() in pmu_fixed_ctr_update_inhibit_bits()
> Changes v3 -> v4:
>   - Check pmu_dev->hw_counter_filter_mode() instead of custom extension
>     in pmu_fixed_ctr_update_inhibit_bits()
> ---
>  include/sbi/sbi_pmu.h |  6 ++++++
>  lib/sbi/sbi_pmu.c     | 20 ++++++++++++++------
>  2 files changed, 20 insertions(+), 6 deletions(-)
>
> diff --git a/include/sbi/sbi_pmu.h b/include/sbi/sbi_pmu.h
> index 16f6877..d63149c 100644
> --- a/include/sbi/sbi_pmu.h
> +++ b/include/sbi/sbi_pmu.h
> @@ -89,6 +89,12 @@ struct sbi_pmu_device {
>          * Custom function returning the machine-specific irq-bit.
>          */
>         int (*hw_counter_irq_bit)(void);
> +
> +       /**
> +        * Custom function to inhibit counting of events while in
> +        * specified mode.
> +        */
> +       void (*hw_counter_filter_mode)(unsigned long flags, int counter_index);
>  };
>
>  /** Get the PMU platform device */
> diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
> index 2ee6e62..4b0f5be 100644
> --- a/lib/sbi/sbi_pmu.c
> +++ b/lib/sbi/sbi_pmu.c
> @@ -599,7 +599,10 @@ static int pmu_update_hw_mhpmevent(struct sbi_pmu_hw_event *hw_evt, int ctr_idx,
>                 pmu_dev->hw_counter_disable_irq(ctr_idx);
>
>         /* Update the inhibit flags based on inhibit flags received from supervisor */
> -       pmu_update_inhibit_flags(flags, &mhpmevent_val);
> +       if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SSCOFPMF))
> +               pmu_update_inhibit_flags(flags, &mhpmevent_val);
> +       if (pmu_dev && pmu_dev->hw_counter_filter_mode)
> +               pmu_dev->hw_counter_filter_mode(flags, ctr_idx);
>
>  #if __riscv_xlen == 32
>         csr_write_num(CSR_MHPMEVENT3 + ctr_idx - 3, mhpmevent_val & 0xFFFFFFFF);
> @@ -620,7 +623,8 @@ static int pmu_fixed_ctr_update_inhibit_bits(int fixed_ctr, unsigned long flags)
>  #if __riscv_xlen == 32
>         uint64_t cfgh_csr_no;
>  #endif
> -       if (!sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF))
> +       if (!sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF) &&
> +               !(pmu_dev && pmu_dev->hw_counter_filter_mode))
>                 return fixed_ctr;
>
>         switch (fixed_ctr) {
> @@ -641,13 +645,17 @@ static int pmu_fixed_ctr_update_inhibit_bits(int fixed_ctr, unsigned long flags)
>         }
>
>         cfg_val |= MHPMEVENT_MINH;
> -       pmu_update_inhibit_flags(flags, &cfg_val);
> +       if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF)) {
> +               pmu_update_inhibit_flags(flags, &cfg_val);
>  #if __riscv_xlen == 32
> -       csr_write_num(cfg_csr_no, cfg_val & 0xFFFFFFFF);
> -       csr_write_num(cfgh_csr_no, cfg_val >> BITS_PER_LONG);
> +               csr_write_num(cfg_csr_no, cfg_val & 0xFFFFFFFF);
> +               csr_write_num(cfgh_csr_no, cfg_val >> BITS_PER_LONG);
>  #else
> -       csr_write_num(cfg_csr_no, cfg_val);
> +               csr_write_num(cfg_csr_no, cfg_val);
>  #endif
> +       }
> +       if (pmu_dev && pmu_dev->hw_counter_filter_mode)
> +               pmu_dev->hw_counter_filter_mode(flags, fixed_ctr);
>         return fixed_ctr;
>  }
>
> --
> 2.34.1
>

[PATCH v4 05/15] platform: include: andes45: Add PMU related CSR defines

[Yu Chien Peter Lin]

Add CSR definitions for Andes PMU extension.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v1 -> v2:
  - Rename andes_pmu() -> has_andes_pmu()
Changes v2 -> v3:
  - Include Anup's RB tag
Changes v3 -> v4:
  - Include RB tags
---
 platform/generic/include/andes/andes45.h | 26 ++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/platform/generic/include/andes/andes45.h b/platform/generic/include/andes/andes45.h
index f570994..ce31617 100644
--- a/platform/generic/include/andes/andes45.h
+++ b/platform/generic/include/andes/andes45.h
@@ -12,6 +12,17 @@
 #define CSR_MDCM_CFG		0xfc1
 #define CSR_MMSC_CFG		0xfc2
 
+/* Machine Trap Related Registers */
+#define CSR_MSLIDELEG		0x7d5
+
+/* Counter Related Registers */
+#define CSR_MCOUNTERWEN		0x7ce
+#define CSR_MCOUNTERINTEN	0x7cf
+#define CSR_MCOUNTERMASK_M	0x7d1
+#define CSR_MCOUNTERMASK_S	0x7d2
+#define CSR_MCOUNTERMASK_U	0x7d3
+#define CSR_MCOUNTEROVF		0x7d4
+
 #define MICM_CFG_ISZ_OFFSET		6
 #define MICM_CFG_ISZ_MASK		(0x7  << MICM_CFG_ISZ_OFFSET)
 
@@ -26,4 +37,19 @@
 #define MCACHE_CTL_CCTL_SUEN_OFFSET	8
 #define MCACHE_CTL_CCTL_SUEN_MASK	(0x1 << MCACHE_CTL_CCTL_SUEN_OFFSET)
 
+/* Performance monitor */
+#define MMSC_CFG_PMNDS_MASK		(1 << 15)
+#define MIP_PMOVI			(1 << 18)
+
+#ifndef __ASSEMBLER__
+
+#define has_andes_pmu()					\
+({							\
+	(((csr_read(CSR_MMSC_CFG) &			\
+	   MMSC_CFG_PMNDS_MASK)				\
+	  && misa_extension('S')) ? true : false);	\
+})
+
+#endif /* __ASSEMBLER__ */
+
 #endif /* _RISCV_ANDES45_H */
-- 
2.34.1

[PATCH v4 06/15] platform: generic: Introduce pmu_init() platform override

[Yu Chien Peter Lin]

Add pmu_init() platform override, which will be used to register
PMU device and populate event mappings.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v2 -> v3:
  - New patch
Changes v3 -> v4:
  - Only return pmu_init override on error so fdt_pmu_setup() can be executed
  - Include RB tags
---
 platform/generic/include/platform_override.h | 1 +
 platform/generic/platform.c                  | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/platform/generic/include/platform_override.h b/platform/generic/include/platform_override.h
index bf4b112..f2a4327 100644
--- a/platform/generic/include/platform_override.h
+++ b/platform/generic/include/platform_override.h
@@ -27,6 +27,7 @@ struct platform_override {
 	int (*fdt_fixup)(void *fdt, const struct fdt_match *match);
 	int (*extensions_init)(const struct fdt_match *match,
 			       struct sbi_hart_features *hfeatures);
+	int (*pmu_init)(const struct fdt_match *match);
 	void (*fw_init)(void *fdt, const struct fdt_match *match);
 	int (*vendor_ext_provider)(long funcid,
 				   const struct sbi_trap_regs *regs,
diff --git a/platform/generic/platform.c b/platform/generic/platform.c
index fa400b9..f17e94e 100644
--- a/platform/generic/platform.c
+++ b/platform/generic/platform.c
@@ -267,6 +267,12 @@ static int generic_pmu_init(void)
 {
 	int rc;
 
+	if (generic_plat && generic_plat->pmu_init) {
+		rc = generic_plat->pmu_init(generic_plat_match);
+		if (rc)
+			return rc;
+	}
+
 	rc = fdt_pmu_setup(fdt_get_address());
 	if (rc && rc != SBI_ENOENT)
 		return rc;
-- 
2.34.1

[PATCH v4 06/15] platform: generic: Introduce pmu_init() platform override

[Anup Patel]

On Thu, Nov 30, 2023 at 6:13?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> Add pmu_init() platform override, which will be used to register
> PMU device and populate event mappings.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Atish Patra <atishp@rivosinc.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

> ---
> Changes v2 -> v3:
>   - New patch
> Changes v3 -> v4:
>   - Only return pmu_init override on error so fdt_pmu_setup() can be executed
>   - Include RB tags
> ---
>  platform/generic/include/platform_override.h | 1 +
>  platform/generic/platform.c                  | 6 ++++++
>  2 files changed, 7 insertions(+)
>
> diff --git a/platform/generic/include/platform_override.h b/platform/generic/include/platform_override.h
> index bf4b112..f2a4327 100644
> --- a/platform/generic/include/platform_override.h
> +++ b/platform/generic/include/platform_override.h
> @@ -27,6 +27,7 @@ struct platform_override {
>         int (*fdt_fixup)(void *fdt, const struct fdt_match *match);
>         int (*extensions_init)(const struct fdt_match *match,
>                                struct sbi_hart_features *hfeatures);
> +       int (*pmu_init)(const struct fdt_match *match);
>         void (*fw_init)(void *fdt, const struct fdt_match *match);
>         int (*vendor_ext_provider)(long funcid,
>                                    const struct sbi_trap_regs *regs,
> diff --git a/platform/generic/platform.c b/platform/generic/platform.c
> index fa400b9..f17e94e 100644
> --- a/platform/generic/platform.c
> +++ b/platform/generic/platform.c
> @@ -267,6 +267,12 @@ static int generic_pmu_init(void)
>  {
>         int rc;
>
> +       if (generic_plat && generic_plat->pmu_init) {
> +               rc = generic_plat->pmu_init(generic_plat_match);
> +               if (rc)
> +                       return rc;
> +       }
> +
>         rc = fdt_pmu_setup(fdt_get_address());
>         if (rc && rc != SBI_ENOENT)
>                 return rc;
> --
> 2.34.1
>

[PATCH v4 07/15] platform: andes: Add Andes custom PMU support

[Yu Chien Peter Lin]

Before the ratification of Sscofpmf, the Andes PMU extension
was designed to support the sampling and filtering with hardware
performance counters (zihpm), it works with the current SBI PMU
extension and Linux SBI PMU driver.

We implement 1) the PMU device callbacks that update the
corresponding bits on custom CSRs, 2) extentions_init() to detect
the hardware support of Andes PMU and initialize the per-hart
PMU related CSR, and 3) pmu_init() to register PMU device and
populate event mappings.

Also define a andes_pmu_setup() function which is in preparation
for adding default PMU mappings in andes_hpm.h

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
---
Changes v1 -> v2:
  - Fix mode filtering in andes_hw_counter_filter_mode()
  - Return early if pmu is not supported in andes_pmu_init() (suggested by Prabhakar)
  - Don't grant write permissions via CSR_MCOUNTERWEN as not needed
Changes v2 -> v3:
  - Drop Anup's RB tag as we add andes_pmu_extensions_init() to initialize per-hart
    extension on scratch and move andes_pmu_init() to new added platform override pmu_init()
Changes v3 -> v4: (suggested by Samuel)
  - Add andes_hpm.h as an placeholder for andes_pmu_setup() to avoid compile failure
  - Do not call fdt_pmu_setup() in andes_pmu_init() as it will be done in generic_pmu_init()
---
 platform/generic/andes/Kconfig             |   8 ++
 platform/generic/andes/andes_pmu.c         | 105 +++++++++++++++++++++
 platform/generic/andes/objects.mk          |   1 +
 platform/generic/include/andes/andes_hpm.h |  12 +++
 platform/generic/include/andes/andes_pmu.h |  34 +++++++
 5 files changed, 160 insertions(+)
 create mode 100644 platform/generic/andes/andes_pmu.c
 create mode 100644 platform/generic/include/andes/andes_hpm.h
 create mode 100644 platform/generic/include/andes/andes_pmu.h

diff --git a/platform/generic/andes/Kconfig b/platform/generic/andes/Kconfig
index a91fb9c..3665b33 100644
--- a/platform/generic/andes/Kconfig
+++ b/platform/generic/andes/Kconfig
@@ -7,3 +7,11 @@ config ANDES45_PMA
 config ANDES_SBI
 	bool "Andes SBI support"
 	default n
+
+config ANDES_PMU
+	bool "Andes PMU extension (XAndesPMU) support"
+	default n
+	help
+	  Andes PMU extension supports the event counter overflow
+	  interrupt and mode filtering, similar to the standard
+	  Sscofpmf and Smcntrpmf.
diff --git a/platform/generic/andes/andes_pmu.c b/platform/generic/andes/andes_pmu.c
new file mode 100644
index 0000000..4b2d45b
--- /dev/null
+++ b/platform/generic/andes/andes_pmu.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: BSD-2-Clause
+/*
+ * andes_pmu.c - Andes PMU device callbacks and platform overrides
+ *
+ * Copyright (C) 2023 Andes Technology Corporation
+ */
+
+#include <andes/andes45.h>
+#include <andes/andes_hpm.h>
+#include <andes/andes_pmu.h>
+#include <sbi/sbi_bitops.h>
+#include <sbi/sbi_error.h>
+#include <sbi/sbi_pmu.h>
+#include <libfdt.h>
+
+static void andes_hw_counter_enable_irq(uint32_t ctr_idx)
+{
+	unsigned long mip_val;
+
+	if (ctr_idx >= SBI_PMU_HW_CTR_MAX)
+		return;
+
+	mip_val = csr_read(CSR_MIP);
+	if (!(mip_val & MIP_PMOVI))
+		csr_clear(CSR_MCOUNTEROVF, BIT(ctr_idx));
+
+	csr_set(CSR_MCOUNTERINTEN, BIT(ctr_idx));
+}
+
+static void andes_hw_counter_disable_irq(uint32_t ctr_idx)
+{
+	csr_clear(CSR_MCOUNTERINTEN, BIT(ctr_idx));
+}
+
+static void andes_hw_counter_filter_mode(unsigned long flags, int ctr_idx)
+{
+	if (flags & SBI_PMU_CFG_FLAG_SET_UINH)
+		csr_set(CSR_MCOUNTERMASK_U, BIT(ctr_idx));
+	else
+		csr_clear(CSR_MCOUNTERMASK_U, BIT(ctr_idx));
+
+	if (flags & SBI_PMU_CFG_FLAG_SET_SINH)
+		csr_set(CSR_MCOUNTERMASK_S, BIT(ctr_idx));
+	else
+		csr_clear(CSR_MCOUNTERMASK_S, BIT(ctr_idx));
+}
+
+static struct sbi_pmu_device andes_pmu = {
+	.name = "andes_pmu",
+	.hw_counter_enable_irq  = andes_hw_counter_enable_irq,
+	.hw_counter_disable_irq = andes_hw_counter_disable_irq,
+	/*
+	 * We set delegation of supervisor local interrupts via
+	 * 18th bit on mslideleg instead of mideleg, so leave
+	 * hw_counter_irq_bit() callback unimplemented.
+	 */
+	.hw_counter_irq_bit     = NULL,
+	.hw_counter_filter_mode = andes_hw_counter_filter_mode
+};
+
+int andes_pmu_extensions_init(const struct fdt_match *match,
+			      struct sbi_hart_features *hfeatures)
+{
+	struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
+
+	if (!has_andes_pmu())
+		return 0;
+
+	/*
+	 * Don't expect both Andes PMU and standard Sscofpmf/Smcntrpmf,
+	 * are supported as they serve the same purpose.
+	 */
+	if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SSCOFPMF) ||
+		sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF))
+		return SBI_EINVAL;
+	sbi_hart_update_extension(scratch, SBI_HART_EXT_XANDESPMU, true);
+
+	/* Inhibit all HPM counters in M-mode */
+	csr_write(CSR_MCOUNTERMASK_M, 0xfffffffd);
+	/* Delegate counter overflow interrupt to S-mode */
+	csr_write(CSR_MSLIDELEG, MIP_PMOVI);
+
+	return 0;
+}
+
+int andes_pmu_init(const struct fdt_match *match)
+{
+	struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
+	void *fdt = fdt_get_address();
+	int pmu_offset;
+
+	if (sbi_hart_has_extension(scratch, SBI_HART_EXT_XANDESPMU))
+		sbi_pmu_set_device(&andes_pmu);
+
+	/*
+	 * Populate default mappings if device-tree doesn't
+	 * provide a valid pmu node.
+	 */
+	pmu_offset = fdt_node_offset_by_compatible(fdt, -1, "riscv,pmu");
+	if (pmu_offset < 0)
+		return (pmu_offset == -FDT_ERR_NOTFOUND) ? andes_pmu_setup()
+							 : SBI_EFAIL;
+
+	return 0;
+}
diff --git a/platform/generic/andes/objects.mk b/platform/generic/andes/objects.mk
index e8f86ea..6a8c66c 100644
--- a/platform/generic/andes/objects.mk
+++ b/platform/generic/andes/objects.mk
@@ -7,3 +7,4 @@ platform-objs-$(CONFIG_PLATFORM_ANDES_AE350) += andes/ae350.o andes/sleep.o
 
 platform-objs-$(CONFIG_ANDES45_PMA) += andes/andes45-pma.o
 platform-objs-$(CONFIG_ANDES_SBI) += andes/andes_sbi.o
+platform-objs-$(CONFIG_ANDES_PMU) += andes/andes_pmu.o
diff --git a/platform/generic/include/andes/andes_hpm.h b/platform/generic/include/andes/andes_hpm.h
new file mode 100644
index 0000000..b4d71b9
--- /dev/null
+++ b/platform/generic/include/andes/andes_hpm.h
@@ -0,0 +1,12 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2023 Andes Technology Corporation
+ */
+
+#ifndef _ANDES_HPM_H_
+#define _ANDES_HPM_H_
+
+static inline int andes_pmu_setup(void) { return 0; }
+
+#endif /* _ANDES_HPM_H_ */
diff --git a/platform/generic/include/andes/andes_pmu.h b/platform/generic/include/andes/andes_pmu.h
new file mode 100644
index 0000000..f355324
--- /dev/null
+++ b/platform/generic/include/andes/andes_pmu.h
@@ -0,0 +1,34 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) Copyright (c) 2023 Andes Technology Corporation
+ */
+
+#ifndef _RISCV_ANDES_PMU_H
+#define _RISCV_ANDES_PMU_H
+
+#include <sbi/sbi_hart.h>
+#include <sbi_utils/fdt/fdt_helper.h>
+#include <sbi_utils/fdt/fdt_pmu.h>
+
+#ifdef CONFIG_ANDES_PMU
+
+int andes_pmu_init(const struct fdt_match *match);
+int andes_pmu_extensions_init(const struct fdt_match *match,
+			      struct sbi_hart_features *hfeatures);
+
+#else
+
+static inline int andes_pmu_init(const struct fdt_match *match)
+{
+	return 0;
+}
+static inline int andes_pmu_extensions_init(const struct fdt_match *match,
+			      struct sbi_hart_features *hfeatures)
+{
+	return 0;
+}
+
+#endif /* CONFIG_ANDES_PMU */
+
+#endif /* _RISCV_ANDES_PMU_H */
-- 
2.34.1

[PATCH v4 07/15] platform: andes: Add Andes custom PMU support

[Anup Patel]

On Thu, Nov 30, 2023 at 6:13?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> Before the ratification of Sscofpmf, the Andes PMU extension
> was designed to support the sampling and filtering with hardware
> performance counters (zihpm), it works with the current SBI PMU
> extension and Linux SBI PMU driver.
>
> We implement 1) the PMU device callbacks that update the
> corresponding bits on custom CSRs, 2) extentions_init() to detect
> the hardware support of Andes PMU and initialize the per-hart
> PMU related CSR, and 3) pmu_init() to register PMU device and
> populate event mappings.
>
> Also define a andes_pmu_setup() function which is in preparation
> for adding default PMU mappings in andes_hpm.h
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>

Looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

> ---
> Changes v1 -> v2:
>   - Fix mode filtering in andes_hw_counter_filter_mode()
>   - Return early if pmu is not supported in andes_pmu_init() (suggested by Prabhakar)
>   - Don't grant write permissions via CSR_MCOUNTERWEN as not needed
> Changes v2 -> v3:
>   - Drop Anup's RB tag as we add andes_pmu_extensions_init() to initialize per-hart
>     extension on scratch and move andes_pmu_init() to new added platform override pmu_init()
> Changes v3 -> v4: (suggested by Samuel)
>   - Add andes_hpm.h as an placeholder for andes_pmu_setup() to avoid compile failure
>   - Do not call fdt_pmu_setup() in andes_pmu_init() as it will be done in generic_pmu_init()
> ---
>  platform/generic/andes/Kconfig             |   8 ++
>  platform/generic/andes/andes_pmu.c         | 105 +++++++++++++++++++++
>  platform/generic/andes/objects.mk          |   1 +
>  platform/generic/include/andes/andes_hpm.h |  12 +++
>  platform/generic/include/andes/andes_pmu.h |  34 +++++++
>  5 files changed, 160 insertions(+)
>  create mode 100644 platform/generic/andes/andes_pmu.c
>  create mode 100644 platform/generic/include/andes/andes_hpm.h
>  create mode 100644 platform/generic/include/andes/andes_pmu.h
>
> diff --git a/platform/generic/andes/Kconfig b/platform/generic/andes/Kconfig
> index a91fb9c..3665b33 100644
> --- a/platform/generic/andes/Kconfig
> +++ b/platform/generic/andes/Kconfig
> @@ -7,3 +7,11 @@ config ANDES45_PMA
>  config ANDES_SBI
>         bool "Andes SBI support"
>         default n
> +
> +config ANDES_PMU
> +       bool "Andes PMU extension (XAndesPMU) support"
> +       default n
> +       help
> +         Andes PMU extension supports the event counter overflow
> +         interrupt and mode filtering, similar to the standard
> +         Sscofpmf and Smcntrpmf.
> diff --git a/platform/generic/andes/andes_pmu.c b/platform/generic/andes/andes_pmu.c
> new file mode 100644
> index 0000000..4b2d45b
> --- /dev/null
> +++ b/platform/generic/andes/andes_pmu.c
> @@ -0,0 +1,105 @@
> +// SPDX-License-Identifier: BSD-2-Clause
> +/*
> + * andes_pmu.c - Andes PMU device callbacks and platform overrides
> + *
> + * Copyright (C) 2023 Andes Technology Corporation
> + */
> +
> +#include <andes/andes45.h>
> +#include <andes/andes_hpm.h>
> +#include <andes/andes_pmu.h>
> +#include <sbi/sbi_bitops.h>
> +#include <sbi/sbi_error.h>
> +#include <sbi/sbi_pmu.h>
> +#include <libfdt.h>
> +
> +static void andes_hw_counter_enable_irq(uint32_t ctr_idx)
> +{
> +       unsigned long mip_val;
> +
> +       if (ctr_idx >= SBI_PMU_HW_CTR_MAX)
> +               return;
> +
> +       mip_val = csr_read(CSR_MIP);
> +       if (!(mip_val & MIP_PMOVI))
> +               csr_clear(CSR_MCOUNTEROVF, BIT(ctr_idx));
> +
> +       csr_set(CSR_MCOUNTERINTEN, BIT(ctr_idx));
> +}
> +
> +static void andes_hw_counter_disable_irq(uint32_t ctr_idx)
> +{
> +       csr_clear(CSR_MCOUNTERINTEN, BIT(ctr_idx));
> +}
> +
> +static void andes_hw_counter_filter_mode(unsigned long flags, int ctr_idx)
> +{
> +       if (flags & SBI_PMU_CFG_FLAG_SET_UINH)
> +               csr_set(CSR_MCOUNTERMASK_U, BIT(ctr_idx));
> +       else
> +               csr_clear(CSR_MCOUNTERMASK_U, BIT(ctr_idx));
> +
> +       if (flags & SBI_PMU_CFG_FLAG_SET_SINH)
> +               csr_set(CSR_MCOUNTERMASK_S, BIT(ctr_idx));
> +       else
> +               csr_clear(CSR_MCOUNTERMASK_S, BIT(ctr_idx));
> +}
> +
> +static struct sbi_pmu_device andes_pmu = {
> +       .name = "andes_pmu",
> +       .hw_counter_enable_irq  = andes_hw_counter_enable_irq,
> +       .hw_counter_disable_irq = andes_hw_counter_disable_irq,
> +       /*
> +        * We set delegation of supervisor local interrupts via
> +        * 18th bit on mslideleg instead of mideleg, so leave
> +        * hw_counter_irq_bit() callback unimplemented.
> +        */
> +       .hw_counter_irq_bit     = NULL,
> +       .hw_counter_filter_mode = andes_hw_counter_filter_mode
> +};
> +
> +int andes_pmu_extensions_init(const struct fdt_match *match,
> +                             struct sbi_hart_features *hfeatures)
> +{
> +       struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
> +
> +       if (!has_andes_pmu())
> +               return 0;
> +
> +       /*
> +        * Don't expect both Andes PMU and standard Sscofpmf/Smcntrpmf,
> +        * are supported as they serve the same purpose.
> +        */
> +       if (sbi_hart_has_extension(scratch, SBI_HART_EXT_SSCOFPMF) ||
> +               sbi_hart_has_extension(scratch, SBI_HART_EXT_SMCNTRPMF))
> +               return SBI_EINVAL;
> +       sbi_hart_update_extension(scratch, SBI_HART_EXT_XANDESPMU, true);
> +
> +       /* Inhibit all HPM counters in M-mode */
> +       csr_write(CSR_MCOUNTERMASK_M, 0xfffffffd);
> +       /* Delegate counter overflow interrupt to S-mode */
> +       csr_write(CSR_MSLIDELEG, MIP_PMOVI);
> +
> +       return 0;
> +}
> +
> +int andes_pmu_init(const struct fdt_match *match)
> +{
> +       struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
> +       void *fdt = fdt_get_address();
> +       int pmu_offset;
> +
> +       if (sbi_hart_has_extension(scratch, SBI_HART_EXT_XANDESPMU))
> +               sbi_pmu_set_device(&andes_pmu);
> +
> +       /*
> +        * Populate default mappings if device-tree doesn't
> +        * provide a valid pmu node.
> +        */
> +       pmu_offset = fdt_node_offset_by_compatible(fdt, -1, "riscv,pmu");
> +       if (pmu_offset < 0)
> +               return (pmu_offset == -FDT_ERR_NOTFOUND) ? andes_pmu_setup()
> +                                                        : SBI_EFAIL;
> +
> +       return 0;
> +}
> diff --git a/platform/generic/andes/objects.mk b/platform/generic/andes/objects.mk
> index e8f86ea..6a8c66c 100644
> --- a/platform/generic/andes/objects.mk
> +++ b/platform/generic/andes/objects.mk
> @@ -7,3 +7,4 @@ platform-objs-$(CONFIG_PLATFORM_ANDES_AE350) += andes/ae350.o andes/sleep.o
>
>  platform-objs-$(CONFIG_ANDES45_PMA) += andes/andes45-pma.o
>  platform-objs-$(CONFIG_ANDES_SBI) += andes/andes_sbi.o
> +platform-objs-$(CONFIG_ANDES_PMU) += andes/andes_pmu.o
> diff --git a/platform/generic/include/andes/andes_hpm.h b/platform/generic/include/andes/andes_hpm.h
> new file mode 100644
> index 0000000..b4d71b9
> --- /dev/null
> +++ b/platform/generic/include/andes/andes_hpm.h
> @@ -0,0 +1,12 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) 2023 Andes Technology Corporation
> + */
> +
> +#ifndef _ANDES_HPM_H_
> +#define _ANDES_HPM_H_
> +
> +static inline int andes_pmu_setup(void) { return 0; }
> +
> +#endif /* _ANDES_HPM_H_ */
> diff --git a/platform/generic/include/andes/andes_pmu.h b/platform/generic/include/andes/andes_pmu.h
> new file mode 100644
> index 0000000..f355324
> --- /dev/null
> +++ b/platform/generic/include/andes/andes_pmu.h
> @@ -0,0 +1,34 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) Copyright (c) 2023 Andes Technology Corporation
> + */
> +
> +#ifndef _RISCV_ANDES_PMU_H
> +#define _RISCV_ANDES_PMU_H
> +
> +#include <sbi/sbi_hart.h>
> +#include <sbi_utils/fdt/fdt_helper.h>
> +#include <sbi_utils/fdt/fdt_pmu.h>
> +
> +#ifdef CONFIG_ANDES_PMU
> +
> +int andes_pmu_init(const struct fdt_match *match);
> +int andes_pmu_extensions_init(const struct fdt_match *match,
> +                             struct sbi_hart_features *hfeatures);
> +
> +#else
> +
> +static inline int andes_pmu_init(const struct fdt_match *match)
> +{
> +       return 0;
> +}
> +static inline int andes_pmu_extensions_init(const struct fdt_match *match,
> +                             struct sbi_hart_features *hfeatures)
> +{
> +       return 0;
> +}
> +
> +#endif /* CONFIG_ANDES_PMU */
> +
> +#endif /* _RISCV_ANDES_PMU_H */
> --
> 2.34.1
>

[PATCH v4 08/15] platform: andes: Enable Andes PMU for AE350

[Yu Chien Peter Lin]

Enable Andes PMU extension support for AE350 platforms.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v1 -> v2:
  - Implement ae350_extensions_init()
Changes v2 -> v3:
  - Use the andes_pmu_extensions_init() and andes_pmu_init() provided by andes_pmu.c
    We have no plan to introduce other extensions in near future so extensions_init()
    bind with andes_pmu_extensions_init() directly.
Changes v3 -> v4:
  - Include RB tags
---
 platform/generic/Kconfig       | 1 +
 platform/generic/andes/ae350.c | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/platform/generic/Kconfig b/platform/generic/Kconfig
index a902cf3..89e5603 100644
--- a/platform/generic/Kconfig
+++ b/platform/generic/Kconfig
@@ -32,6 +32,7 @@ config PLATFORM_ALLWINNER_D1
 config PLATFORM_ANDES_AE350
 	bool "Andes AE350 support"
 	select SYS_ATCSMU
+	select ANDES_PMU
 	default n
 
 config PLATFORM_RENESAS_RZFIVE
diff --git a/platform/generic/andes/ae350.c b/platform/generic/andes/ae350.c
index 80eca05..dc769b7 100644
--- a/platform/generic/andes/ae350.c
+++ b/platform/generic/andes/ae350.c
@@ -8,6 +8,7 @@
  */
 
 #include <platform_override.h>
+#include <andes/andes_pmu.h>
 #include <sbi_utils/fdt/fdt_helper.h>
 #include <sbi_utils/fdt/fdt_fixup.h>
 #include <sbi_utils/sys/atcsmu.h>
@@ -118,4 +119,6 @@ static const struct fdt_match andes_ae350_match[] = {
 const struct platform_override andes_ae350 = {
 	.match_table = andes_ae350_match,
 	.final_init  = ae350_final_init,
+	.extensions_init = andes_pmu_extensions_init,
+	.pmu_init = andes_pmu_init,
 };
-- 
2.34.1

[PATCH v4 08/15] platform: andes: Enable Andes PMU for AE350

[Anup Patel]

On Thu, Nov 30, 2023 at 6:13?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> Enable Andes PMU extension support for AE350 platforms.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
> Reviewed-by: Atish Patra <atishp@rivosinc.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

> ---
> Changes v1 -> v2:
>   - Implement ae350_extensions_init()
> Changes v2 -> v3:
>   - Use the andes_pmu_extensions_init() and andes_pmu_init() provided by andes_pmu.c
>     We have no plan to introduce other extensions in near future so extensions_init()
>     bind with andes_pmu_extensions_init() directly.
> Changes v3 -> v4:
>   - Include RB tags
> ---
>  platform/generic/Kconfig       | 1 +
>  platform/generic/andes/ae350.c | 3 +++
>  2 files changed, 4 insertions(+)
>
> diff --git a/platform/generic/Kconfig b/platform/generic/Kconfig
> index a902cf3..89e5603 100644
> --- a/platform/generic/Kconfig
> +++ b/platform/generic/Kconfig
> @@ -32,6 +32,7 @@ config PLATFORM_ALLWINNER_D1
>  config PLATFORM_ANDES_AE350
>         bool "Andes AE350 support"
>         select SYS_ATCSMU
> +       select ANDES_PMU
>         default n
>
>  config PLATFORM_RENESAS_RZFIVE
> diff --git a/platform/generic/andes/ae350.c b/platform/generic/andes/ae350.c
> index 80eca05..dc769b7 100644
> --- a/platform/generic/andes/ae350.c
> +++ b/platform/generic/andes/ae350.c
> @@ -8,6 +8,7 @@
>   */
>
>  #include <platform_override.h>
> +#include <andes/andes_pmu.h>
>  #include <sbi_utils/fdt/fdt_helper.h>
>  #include <sbi_utils/fdt/fdt_fixup.h>
>  #include <sbi_utils/sys/atcsmu.h>
> @@ -118,4 +119,6 @@ static const struct fdt_match andes_ae350_match[] = {
>  const struct platform_override andes_ae350 = {
>         .match_table = andes_ae350_match,
>         .final_init  = ae350_final_init,
> +       .extensions_init = andes_pmu_extensions_init,
> +       .pmu_init = andes_pmu_init,
>  };
> --
> 2.34.1
>

[PATCH v4 09/15] platform: rzfive: Enable Andes PMU for RZ/Five

[Yu Chien Peter Lin]

Enable Andes PMU extension support for RZ/Five.
We also staticize renesas_rzfive_early_init() as
it is not used outside of this unit.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v1 -> v2:
  - Implement renesas_rzfive_extensions_init()
  - staticize renesas_rzfive_early_init()
Changes v2 -> v3:
  - Use the andes_pmu_extensions_init() and andes_pmu_init() provided by andes_pmu.c
    We have no plan to introduce other extensions in near future so extensions_init()
    bind with andes_pmu_extensions_init() directly.
Changes v3 -> v4:
  - Include RB tags
---
 platform/generic/Kconfig                 | 1 +
 platform/generic/renesas/rzfive/rzfive.c | 5 ++++-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/platform/generic/Kconfig b/platform/generic/Kconfig
index 89e5603..c9b6011 100644
--- a/platform/generic/Kconfig
+++ b/platform/generic/Kconfig
@@ -39,6 +39,7 @@ config PLATFORM_RENESAS_RZFIVE
 	bool "Renesas RZ/Five support"
 	select ANDES45_PMA
 	select ANDES_SBI
+	select ANDES_PMU
 	default n
 
 config PLATFORM_SIFIVE_FU540
diff --git a/platform/generic/renesas/rzfive/rzfive.c b/platform/generic/renesas/rzfive/rzfive.c
index a69797b..b5b5e65 100644
--- a/platform/generic/renesas/rzfive/rzfive.c
+++ b/platform/generic/renesas/rzfive/rzfive.c
@@ -5,6 +5,7 @@
  */
 
 #include <andes/andes45_pma.h>
+#include <andes/andes_pmu.h>
 #include <andes/andes_sbi.h>
 #include <platform_override.h>
 #include <sbi/sbi_domain.h>
@@ -29,7 +30,7 @@ static int renesas_rzfive_final_init(bool cold_boot, const struct fdt_match *mat
 					 array_size(renesas_rzfive_pma_regions));
 }
 
-int renesas_rzfive_early_init(bool cold_boot, const struct fdt_match *match)
+static int renesas_rzfive_early_init(bool cold_boot, const struct fdt_match *match)
 {
 	/*
 	 * Renesas RZ/Five RISC-V SoC has Instruction local memory and
@@ -57,4 +58,6 @@ const struct platform_override renesas_rzfive = {
 	.early_init = renesas_rzfive_early_init,
 	.final_init = renesas_rzfive_final_init,
 	.vendor_ext_provider = andes_sbi_vendor_ext_provider,
+	.extensions_init = andes_pmu_extensions_init,
+	.pmu_init = andes_pmu_init,
 };
-- 
2.34.1

[PATCH v4 09/15] platform: rzfive: Enable Andes PMU for RZ/Five

[Anup Patel]

On Thu, Nov 30, 2023 at 6:13?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> Enable Andes PMU extension support for RZ/Five.
> We also staticize renesas_rzfive_early_init() as
> it is not used outside of this unit.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
> Reviewed-by: Atish Patra <atishp@rivosinc.com>
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

> ---
> Changes v1 -> v2:
>   - Implement renesas_rzfive_extensions_init()
>   - staticize renesas_rzfive_early_init()
> Changes v2 -> v3:
>   - Use the andes_pmu_extensions_init() and andes_pmu_init() provided by andes_pmu.c
>     We have no plan to introduce other extensions in near future so extensions_init()
>     bind with andes_pmu_extensions_init() directly.
> Changes v3 -> v4:
>   - Include RB tags
> ---
>  platform/generic/Kconfig                 | 1 +
>  platform/generic/renesas/rzfive/rzfive.c | 5 ++++-
>  2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/platform/generic/Kconfig b/platform/generic/Kconfig
> index 89e5603..c9b6011 100644
> --- a/platform/generic/Kconfig
> +++ b/platform/generic/Kconfig
> @@ -39,6 +39,7 @@ config PLATFORM_RENESAS_RZFIVE
>         bool "Renesas RZ/Five support"
>         select ANDES45_PMA
>         select ANDES_SBI
> +       select ANDES_PMU
>         default n
>
>  config PLATFORM_SIFIVE_FU540
> diff --git a/platform/generic/renesas/rzfive/rzfive.c b/platform/generic/renesas/rzfive/rzfive.c
> index a69797b..b5b5e65 100644
> --- a/platform/generic/renesas/rzfive/rzfive.c
> +++ b/platform/generic/renesas/rzfive/rzfive.c
> @@ -5,6 +5,7 @@
>   */
>
>  #include <andes/andes45_pma.h>
> +#include <andes/andes_pmu.h>
>  #include <andes/andes_sbi.h>
>  #include <platform_override.h>
>  #include <sbi/sbi_domain.h>
> @@ -29,7 +30,7 @@ static int renesas_rzfive_final_init(bool cold_boot, const struct fdt_match *mat
>                                          array_size(renesas_rzfive_pma_regions));
>  }
>
> -int renesas_rzfive_early_init(bool cold_boot, const struct fdt_match *match)
> +static int renesas_rzfive_early_init(bool cold_boot, const struct fdt_match *match)
>  {
>         /*
>          * Renesas RZ/Five RISC-V SoC has Instruction local memory and
> @@ -57,4 +58,6 @@ const struct platform_override renesas_rzfive = {
>         .early_init = renesas_rzfive_early_init,
>         .final_init = renesas_rzfive_final_init,
>         .vendor_ext_provider = andes_sbi_vendor_ext_provider,
> +       .extensions_init = andes_pmu_extensions_init,
> +       .pmu_init = andes_pmu_init,
>  };
> --
> 2.34.1
>

[PATCH v4 10/15] lib: utils: fdt_fixup: Allow preserving PMU properties

[Yu Chien Peter Lin]

Add a Kconfig option to control PMU fixup, so the next
stage software can dump the PMU node including event
mapping information for debugging purposes.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
---
Changes v1 -> v2:
  - New patch
Changes v2 -> v3:
  - Rename to SBI_SCRATCH_PRESERVE_PMU_NODE (suggested by Anup)
  - Include Anup's RB tag
Changes v3 -> v4:
  - Use Kconfig instead (suggested by Anup)
---
 lib/utils/fdt/Kconfig     | 7 +++++++
 lib/utils/fdt/fdt_fixup.c | 3 +++
 2 files changed, 10 insertions(+)

diff --git a/lib/utils/fdt/Kconfig b/lib/utils/fdt/Kconfig
index 23b003b..9a42d15 100644
--- a/lib/utils/fdt/Kconfig
+++ b/lib/utils/fdt/Kconfig
@@ -15,4 +15,11 @@ config FDT_PMU
 	bool "FDT performance monitoring unit (PMU) support"
 	default n
 
+config FDT_FIXUPS_PRESERVE_PMU_NODE
+	bool "Preserve PMU node in device-tree"
+	depends on FDT_PMU
+	default n
+	help
+	  Preserve PMU node properties for debugging purposes.
+
 endif
diff --git a/lib/utils/fdt/fdt_fixup.c b/lib/utils/fdt/fdt_fixup.c
index e213ded..5fc7673 100644
--- a/lib/utils/fdt/fdt_fixup.c
+++ b/lib/utils/fdt/fdt_fixup.c
@@ -394,5 +394,8 @@ void fdt_fixups(void *fdt)
 	fdt_plic_fixup(fdt);
 
 	fdt_reserved_memory_fixup(fdt);
+
+#ifndef CONFIG_FDT_FIXUPS_PRESERVE_PMU_NODE
 	fdt_pmu_fixup(fdt);
+#endif
 }
-- 
2.34.1

[PATCH v4 10/15] lib: utils: fdt_fixup: Allow preserving PMU properties

[Atish Patra]

On Thu, Nov 30, 2023 at 4:43?AM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> Add a Kconfig option to control PMU fixup, so the next
> stage software can dump the PMU node including event
> mapping information for debugging purposes.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> ---
> Changes v1 -> v2:
>   - New patch
> Changes v2 -> v3:
>   - Rename to SBI_SCRATCH_PRESERVE_PMU_NODE (suggested by Anup)
>   - Include Anup's RB tag
> Changes v3 -> v4:
>   - Use Kconfig instead (suggested by Anup)
> ---
>  lib/utils/fdt/Kconfig     | 7 +++++++
>  lib/utils/fdt/fdt_fixup.c | 3 +++
>  2 files changed, 10 insertions(+)
>
> diff --git a/lib/utils/fdt/Kconfig b/lib/utils/fdt/Kconfig
> index 23b003b..9a42d15 100644
> --- a/lib/utils/fdt/Kconfig
> +++ b/lib/utils/fdt/Kconfig
> @@ -15,4 +15,11 @@ config FDT_PMU
>         bool "FDT performance monitoring unit (PMU) support"
>         default n
>
> +config FDT_FIXUPS_PRESERVE_PMU_NODE
> +       bool "Preserve PMU node in device-tree"
> +       depends on FDT_PMU
> +       default n
> +       help
> +         Preserve PMU node properties for debugging purposes.
> +
>  endif
> diff --git a/lib/utils/fdt/fdt_fixup.c b/lib/utils/fdt/fdt_fixup.c
> index e213ded..5fc7673 100644
> --- a/lib/utils/fdt/fdt_fixup.c
> +++ b/lib/utils/fdt/fdt_fixup.c
> @@ -394,5 +394,8 @@ void fdt_fixups(void *fdt)
>         fdt_plic_fixup(fdt);
>
>         fdt_reserved_memory_fixup(fdt);
> +
> +#ifndef CONFIG_FDT_FIXUPS_PRESERVE_PMU_NODE
>         fdt_pmu_fixup(fdt);
> +#endif
>  }
> --
> 2.34.1
>


Reviewed-by: Atish Patra <atishp@rivosinc.com>
-- 
Regards,
Atish

[PATCH v4 10/15] lib: utils: fdt_fixup: Allow preserving PMU properties

[Anup Patel]

On Thu, Nov 30, 2023 at 6:13?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> Add a Kconfig option to control PMU fixup, so the next
> stage software can dump the PMU node including event
> mapping information for debugging purposes.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>

Looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

> ---
> Changes v1 -> v2:
>   - New patch
> Changes v2 -> v3:
>   - Rename to SBI_SCRATCH_PRESERVE_PMU_NODE (suggested by Anup)
>   - Include Anup's RB tag
> Changes v3 -> v4:
>   - Use Kconfig instead (suggested by Anup)
> ---
>  lib/utils/fdt/Kconfig     | 7 +++++++
>  lib/utils/fdt/fdt_fixup.c | 3 +++
>  2 files changed, 10 insertions(+)
>
> diff --git a/lib/utils/fdt/Kconfig b/lib/utils/fdt/Kconfig
> index 23b003b..9a42d15 100644
> --- a/lib/utils/fdt/Kconfig
> +++ b/lib/utils/fdt/Kconfig
> @@ -15,4 +15,11 @@ config FDT_PMU
>         bool "FDT performance monitoring unit (PMU) support"
>         default n
>
> +config FDT_FIXUPS_PRESERVE_PMU_NODE
> +       bool "Preserve PMU node in device-tree"
> +       depends on FDT_PMU
> +       default n
> +       help
> +         Preserve PMU node properties for debugging purposes.
> +
>  endif
> diff --git a/lib/utils/fdt/fdt_fixup.c b/lib/utils/fdt/fdt_fixup.c
> index e213ded..5fc7673 100644
> --- a/lib/utils/fdt/fdt_fixup.c
> +++ b/lib/utils/fdt/fdt_fixup.c
> @@ -394,5 +394,8 @@ void fdt_fixups(void *fdt)
>         fdt_plic_fixup(fdt);
>
>         fdt_reserved_memory_fixup(fdt);
> +
> +#ifndef CONFIG_FDT_FIXUPS_PRESERVE_PMU_NODE
>         fdt_pmu_fixup(fdt);
> +#endif
>  }
> --
> 2.34.1
>

[PATCH v4 11/15] platform: andes: Factor out is_andes() helper

[Yu Chien Peter Lin]

We will need is_andes(45) in the following patch,
so factor out the code that parses marchid to make
it reusable for checking any Andes CPU variants.

Also improves the comment in ae350_hart_start().

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
---
Changes v1 -> v2:
  - New patch
Changes v2 -> v3:
  - Include Anup's RB tag
Changes v3 -> v4:
  - No change
---
 platform/generic/andes/ae350.c           | 16 +++++++---------
 platform/generic/include/andes/andes45.h |  6 ++++++
 2 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/platform/generic/andes/ae350.c b/platform/generic/andes/ae350.c
index dc769b7..088ec07 100644
--- a/platform/generic/andes/ae350.c
+++ b/platform/generic/andes/ae350.c
@@ -24,16 +24,14 @@ static struct smu_data smu = { 0 };
 extern void __ae350_enable_coherency_warmboot(void);
 extern void __ae350_disable_coherency(void);
 
-static __always_inline bool is_andes25(void)
-{
-	ulong marchid = csr_read(CSR_MARCHID);
-	return !!(EXTRACT_FIELD(marchid, CSR_MARCHID_MICROID) == 0xa25);
-}
-
 static int ae350_hart_start(u32 hartid, ulong saddr)
 {
-	/* Don't send wakeup command at boot-time */
-	if (!sbi_init_count(hartid) || (is_andes25() && hartid == 0))
+	/*
+	 * Don't send wakeup command when:
+	 * 1) boot-time
+	 * 2) the target hart is non-sleepable 25-series hart0
+	 */
+	if (!sbi_init_count(hartid) || (is_andes(25) && hartid == 0))
 		return sbi_ipi_raw_send(sbi_hartid_to_hartindex(hartid));
 
 	/* Write wakeup command to the sleep hart */
@@ -52,7 +50,7 @@ static int ae350_hart_stop(void)
 	 * L2-cache, instead of turning it off, it should fall
 	 * through and jump to warmboot_addr.
 	 */
-	if (is_andes25() && hartid == 0)
+	if (is_andes(25) && hartid == 0)
 		return SBI_ENOTSUPP;
 
 	if (!smu_support_sleep_mode(&smu, DEEPSLEEP_MODE, hartid))
diff --git a/platform/generic/include/andes/andes45.h b/platform/generic/include/andes/andes45.h
index ce31617..01f63d4 100644
--- a/platform/generic/include/andes/andes45.h
+++ b/platform/generic/include/andes/andes45.h
@@ -43,6 +43,12 @@
 
 #ifndef __ASSEMBLER__
 
+#define is_andes(series)				\
+({							\
+	char value = csr_read(CSR_MARCHID) & 0xff;	\
+	(series) == (value >> 4) * 10 + (value & 0x0f);	\
+})
+
 #define has_andes_pmu()					\
 ({							\
 	(((csr_read(CSR_MMSC_CFG) &			\
-- 
2.34.1

[PATCH v4 12/15] lib: utils: fdt_pmu: Make the fdt_pmu_evt_select table global variable

[Yu Chien Peter Lin]

To allow platform override pmu_init() filling the translation table
fdt_pmu_evt_select[] when PMU node doesn't provide such information,
we need to share the table and its entry counter with other .c file.

We also define the structures of PMU property in fdt_helper.h, so we
can initialize the mappings in arrays.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
---
Changes v2 -> v3:
  - New patch
Changes v3 -> v4:
  - No change
---
 include/sbi_utils/fdt/fdt_helper.h | 17 +++++++++++++++++
 include/sbi_utils/fdt/fdt_pmu.h    |  6 ++++++
 lib/utils/fdt/fdt_pmu.c            | 13 ++++---------
 3 files changed, 27 insertions(+), 9 deletions(-)

diff --git a/include/sbi_utils/fdt/fdt_helper.h b/include/sbi_utils/fdt/fdt_helper.h
index 5c928ff..f6f505b 100644
--- a/include/sbi_utils/fdt/fdt_helper.h
+++ b/include/sbi_utils/fdt/fdt_helper.h
@@ -34,6 +34,23 @@ struct platform_uart_data {
 	unsigned long reg_offset;
 };
 
+struct fdt_pmu_hw_event_select_map {
+	uint32_t eidx;
+	uint64_t select;
+};
+
+struct fdt_pmu_hw_event_counter_map {
+	uint32_t eidx_start;
+	uint32_t eidx_end;
+	uint32_t ctr_map;
+};
+
+struct fdt_pmu_raw_event_counter_map {
+	uint64_t select;
+	uint64_t select_mask;
+	uint32_t ctr_map;
+};
+
 const struct fdt_match *fdt_match_node(void *fdt, int nodeoff,
 				       const struct fdt_match *match_table);
 
diff --git a/include/sbi_utils/fdt/fdt_pmu.h b/include/sbi_utils/fdt/fdt_pmu.h
index c65cad7..9a13487 100644
--- a/include/sbi_utils/fdt/fdt_pmu.h
+++ b/include/sbi_utils/fdt/fdt_pmu.h
@@ -12,6 +12,7 @@
 #define __FDT_PMU_H__
 
 #include <sbi/sbi_types.h>
+#include <sbi_utils/fdt/fdt_helper.h>
 
 #ifdef CONFIG_FDT_PMU
 
@@ -45,6 +46,11 @@ int fdt_pmu_setup(void *fdt);
  */
 uint64_t fdt_pmu_get_select_value(uint32_t event_idx);
 
+/** The event index to selector value table instance */
+extern struct fdt_pmu_hw_event_select_map fdt_pmu_evt_select[];
+/** The number of valid entries in fdt_pmu_evt_select[] */
+extern uint32_t hw_event_count;
+
 #else
 
 static inline void fdt_pmu_fixup(void *fdt) { }
diff --git a/lib/utils/fdt/fdt_pmu.c b/lib/utils/fdt/fdt_pmu.c
index a8d7648..cf3220f 100644
--- a/lib/utils/fdt/fdt_pmu.c
+++ b/lib/utils/fdt/fdt_pmu.c
@@ -17,18 +17,13 @@
 
 #define FDT_PMU_HW_EVENT_MAX (SBI_PMU_HW_EVENT_MAX * 2)
 
-struct fdt_pmu_hw_event_select {
-	uint32_t eidx;
-	uint64_t select;
-};
-
-static struct fdt_pmu_hw_event_select fdt_pmu_evt_select[FDT_PMU_HW_EVENT_MAX] = {0};
-static uint32_t hw_event_count;
+struct fdt_pmu_hw_event_select_map fdt_pmu_evt_select[FDT_PMU_HW_EVENT_MAX] = {0};
+uint32_t hw_event_count;
 
 uint64_t fdt_pmu_get_select_value(uint32_t event_idx)
 {
 	int i;
-	struct fdt_pmu_hw_event_select *event;
+	struct fdt_pmu_hw_event_select_map *event;
 
 	for (i = 0; i < SBI_PMU_HW_EVENT_MAX; i++) {
 		event = &fdt_pmu_evt_select[i];
@@ -65,7 +60,7 @@ int fdt_pmu_setup(void *fdt)
 	int i, pmu_offset, len, result;
 	const u32 *event_val;
 	const u32 *event_ctr_map;
-	struct fdt_pmu_hw_event_select *event;
+	struct fdt_pmu_hw_event_select_map *event;
 	uint64_t raw_selector, select_mask;
 	u32 event_idx_start, event_idx_end, ctr_map;
 
-- 
2.34.1

[PATCH v4 12/15] lib: utils: fdt_pmu: Make the fdt_pmu_evt_select table global variable

[Atish Patra]

On Thu, Nov 30, 2023 at 4:43?AM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> To allow platform override pmu_init() filling the translation table
> fdt_pmu_evt_select[] when PMU node doesn't provide such information,
> we need to share the table and its entry counter with other .c file.
>
> We also define the structures of PMU property in fdt_helper.h, so we
> can initialize the mappings in arrays.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> ---
> Changes v2 -> v3:
>   - New patch
> Changes v3 -> v4:
>   - No change
> ---
>  include/sbi_utils/fdt/fdt_helper.h | 17 +++++++++++++++++
>  include/sbi_utils/fdt/fdt_pmu.h    |  6 ++++++
>  lib/utils/fdt/fdt_pmu.c            | 13 ++++---------
>  3 files changed, 27 insertions(+), 9 deletions(-)
>
> diff --git a/include/sbi_utils/fdt/fdt_helper.h b/include/sbi_utils/fdt/fdt_helper.h
> index 5c928ff..f6f505b 100644
> --- a/include/sbi_utils/fdt/fdt_helper.h
> +++ b/include/sbi_utils/fdt/fdt_helper.h
> @@ -34,6 +34,23 @@ struct platform_uart_data {
>         unsigned long reg_offset;
>  };
>
> +struct fdt_pmu_hw_event_select_map {
> +       uint32_t eidx;
> +       uint64_t select;
> +};
> +
> +struct fdt_pmu_hw_event_counter_map {
> +       uint32_t eidx_start;
> +       uint32_t eidx_end;
> +       uint32_t ctr_map;
> +};
> +
> +struct fdt_pmu_raw_event_counter_map {
> +       uint64_t select;
> +       uint64_t select_mask;
> +       uint32_t ctr_map;
> +};
> +
>  const struct fdt_match *fdt_match_node(void *fdt, int nodeoff,
>                                        const struct fdt_match *match_table);
>
> diff --git a/include/sbi_utils/fdt/fdt_pmu.h b/include/sbi_utils/fdt/fdt_pmu.h
> index c65cad7..9a13487 100644
> --- a/include/sbi_utils/fdt/fdt_pmu.h
> +++ b/include/sbi_utils/fdt/fdt_pmu.h
> @@ -12,6 +12,7 @@
>  #define __FDT_PMU_H__
>
>  #include <sbi/sbi_types.h>
> +#include <sbi_utils/fdt/fdt_helper.h>
>
>  #ifdef CONFIG_FDT_PMU
>
> @@ -45,6 +46,11 @@ int fdt_pmu_setup(void *fdt);
>   */
>  uint64_t fdt_pmu_get_select_value(uint32_t event_idx);
>
> +/** The event index to selector value table instance */
> +extern struct fdt_pmu_hw_event_select_map fdt_pmu_evt_select[];
> +/** The number of valid entries in fdt_pmu_evt_select[] */
> +extern uint32_t hw_event_count;
> +
>  #else
>
>  static inline void fdt_pmu_fixup(void *fdt) { }
> diff --git a/lib/utils/fdt/fdt_pmu.c b/lib/utils/fdt/fdt_pmu.c
> index a8d7648..cf3220f 100644
> --- a/lib/utils/fdt/fdt_pmu.c
> +++ b/lib/utils/fdt/fdt_pmu.c
> @@ -17,18 +17,13 @@
>
>  #define FDT_PMU_HW_EVENT_MAX (SBI_PMU_HW_EVENT_MAX * 2)
>
> -struct fdt_pmu_hw_event_select {
> -       uint32_t eidx;
> -       uint64_t select;
> -};
> -
> -static struct fdt_pmu_hw_event_select fdt_pmu_evt_select[FDT_PMU_HW_EVENT_MAX] = {0};
> -static uint32_t hw_event_count;
> +struct fdt_pmu_hw_event_select_map fdt_pmu_evt_select[FDT_PMU_HW_EVENT_MAX] = {0};
> +uint32_t hw_event_count;
>
>  uint64_t fdt_pmu_get_select_value(uint32_t event_idx)
>  {
>         int i;
> -       struct fdt_pmu_hw_event_select *event;
> +       struct fdt_pmu_hw_event_select_map *event;
>
>         for (i = 0; i < SBI_PMU_HW_EVENT_MAX; i++) {
>                 event = &fdt_pmu_evt_select[i];
> @@ -65,7 +60,7 @@ int fdt_pmu_setup(void *fdt)
>         int i, pmu_offset, len, result;
>         const u32 *event_val;
>         const u32 *event_ctr_map;
> -       struct fdt_pmu_hw_event_select *event;
> +       struct fdt_pmu_hw_event_select_map *event;
>         uint64_t raw_selector, select_mask;
>         u32 event_idx_start, event_idx_end, ctr_map;
>
> --
> 2.34.1
>


Reviewed-by: Atish Patra <atishp@rivosinc.com>
-- 
Regards,
Atish

[PATCH v4 12/15] lib: utils: fdt_pmu: Make the fdt_pmu_evt_select table global variable

[Anup Patel]

On Thu, Nov 30, 2023 at 6:13?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> To allow platform override pmu_init() filling the translation table
> fdt_pmu_evt_select[] when PMU node doesn't provide such information,
> we need to share the table and its entry counter with other .c file.
>
> We also define the structures of PMU property in fdt_helper.h, so we
> can initialize the mappings in arrays.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> ---
> Changes v2 -> v3:
>   - New patch
> Changes v3 -> v4:
>   - No change
> ---
>  include/sbi_utils/fdt/fdt_helper.h | 17 +++++++++++++++++
>  include/sbi_utils/fdt/fdt_pmu.h    |  6 ++++++
>  lib/utils/fdt/fdt_pmu.c            | 13 ++++---------
>  3 files changed, 27 insertions(+), 9 deletions(-)
>
> diff --git a/include/sbi_utils/fdt/fdt_helper.h b/include/sbi_utils/fdt/fdt_helper.h
> index 5c928ff..f6f505b 100644
> --- a/include/sbi_utils/fdt/fdt_helper.h
> +++ b/include/sbi_utils/fdt/fdt_helper.h
> @@ -34,6 +34,23 @@ struct platform_uart_data {
>         unsigned long reg_offset;
>  };
>
> +struct fdt_pmu_hw_event_select_map {
> +       uint32_t eidx;
> +       uint64_t select;
> +};
> +
> +struct fdt_pmu_hw_event_counter_map {
> +       uint32_t eidx_start;
> +       uint32_t eidx_end;
> +       uint32_t ctr_map;
> +};
> +
> +struct fdt_pmu_raw_event_counter_map {
> +       uint64_t select;
> +       uint64_t select_mask;
> +       uint32_t ctr_map;
> +};
> +

These definitions can be moved to fdt_pmu.h. I will take care of it
at the time of merging this patch.

>  const struct fdt_match *fdt_match_node(void *fdt, int nodeoff,
>                                        const struct fdt_match *match_table);
>
> diff --git a/include/sbi_utils/fdt/fdt_pmu.h b/include/sbi_utils/fdt/fdt_pmu.h
> index c65cad7..9a13487 100644
> --- a/include/sbi_utils/fdt/fdt_pmu.h
> +++ b/include/sbi_utils/fdt/fdt_pmu.h
> @@ -12,6 +12,7 @@
>  #define __FDT_PMU_H__
>
>  #include <sbi/sbi_types.h>
> +#include <sbi_utils/fdt/fdt_helper.h>
>
>  #ifdef CONFIG_FDT_PMU
>
> @@ -45,6 +46,11 @@ int fdt_pmu_setup(void *fdt);
>   */
>  uint64_t fdt_pmu_get_select_value(uint32_t event_idx);
>
> +/** The event index to selector value table instance */
> +extern struct fdt_pmu_hw_event_select_map fdt_pmu_evt_select[];
> +/** The number of valid entries in fdt_pmu_evt_select[] */
> +extern uint32_t hw_event_count;
> +
>  #else
>
>  static inline void fdt_pmu_fixup(void *fdt) { }
> diff --git a/lib/utils/fdt/fdt_pmu.c b/lib/utils/fdt/fdt_pmu.c
> index a8d7648..cf3220f 100644
> --- a/lib/utils/fdt/fdt_pmu.c
> +++ b/lib/utils/fdt/fdt_pmu.c
> @@ -17,18 +17,13 @@
>
>  #define FDT_PMU_HW_EVENT_MAX (SBI_PMU_HW_EVENT_MAX * 2)
>
> -struct fdt_pmu_hw_event_select {
> -       uint32_t eidx;
> -       uint64_t select;
> -};
> -
> -static struct fdt_pmu_hw_event_select fdt_pmu_evt_select[FDT_PMU_HW_EVENT_MAX] = {0};
> -static uint32_t hw_event_count;
> +struct fdt_pmu_hw_event_select_map fdt_pmu_evt_select[FDT_PMU_HW_EVENT_MAX] = {0};
> +uint32_t hw_event_count;
>
>  uint64_t fdt_pmu_get_select_value(uint32_t event_idx)
>  {
>         int i;
> -       struct fdt_pmu_hw_event_select *event;
> +       struct fdt_pmu_hw_event_select_map *event;
>
>         for (i = 0; i < SBI_PMU_HW_EVENT_MAX; i++) {
>                 event = &fdt_pmu_evt_select[i];
> @@ -65,7 +60,7 @@ int fdt_pmu_setup(void *fdt)
>         int i, pmu_offset, len, result;
>         const u32 *event_val;
>         const u32 *event_ctr_map;
> -       struct fdt_pmu_hw_event_select *event;
> +       struct fdt_pmu_hw_event_select_map *event;
>         uint64_t raw_selector, select_mask;
>         u32 event_idx_start, event_idx_end, ctr_map;
>
> --
> 2.34.1
>

Otherwise, it looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

[PATCH v4 13/15] lib: utils: fdt_pmu: Do not iterate over the fdt_pmu_evt_select table

[Yu Chien Peter Lin]

The valid entry count is tracking by hw_event_count so there
is no need to check the whole table.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
---
Changes v2 -> v3:
  - New patch
Changes v3 -> v4:
  - No change
---
 lib/utils/fdt/fdt_pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/utils/fdt/fdt_pmu.c b/lib/utils/fdt/fdt_pmu.c
index cf3220f..c531b9a 100644
--- a/lib/utils/fdt/fdt_pmu.c
+++ b/lib/utils/fdt/fdt_pmu.c
@@ -25,7 +25,7 @@ uint64_t fdt_pmu_get_select_value(uint32_t event_idx)
 	int i;
 	struct fdt_pmu_hw_event_select_map *event;
 
-	for (i = 0; i < SBI_PMU_HW_EVENT_MAX; i++) {
+	for (i = 0; i < hw_event_count; i++) {
 		event = &fdt_pmu_evt_select[i];
 		if (event->eidx == event_idx)
 			return event->select;
-- 
2.34.1

[PATCH v4 13/15] lib: utils: fdt_pmu: Do not iterate over the fdt_pmu_evt_select table

[Atish Patra]

On Thu, Nov 30, 2023 at 4:43?AM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> The valid entry count is tracking by hw_event_count so there
> is no need to check the whole table.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> ---
> Changes v2 -> v3:
>   - New patch
> Changes v3 -> v4:
>   - No change
> ---
>  lib/utils/fdt/fdt_pmu.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/lib/utils/fdt/fdt_pmu.c b/lib/utils/fdt/fdt_pmu.c
> index cf3220f..c531b9a 100644
> --- a/lib/utils/fdt/fdt_pmu.c
> +++ b/lib/utils/fdt/fdt_pmu.c
> @@ -25,7 +25,7 @@ uint64_t fdt_pmu_get_select_value(uint32_t event_idx)
>         int i;
>         struct fdt_pmu_hw_event_select_map *event;
>
> -       for (i = 0; i < SBI_PMU_HW_EVENT_MAX; i++) {
> +       for (i = 0; i < hw_event_count; i++) {
>                 event = &fdt_pmu_evt_select[i];
>                 if (event->eidx == event_idx)
>                         return event->select;
> --
> 2.34.1
>


Reviewed-by: Atish Patra <atishp@rivosinc.com>
-- 
Regards,
Atish

[PATCH v4 13/15] lib: utils: fdt_pmu: Do not iterate over the fdt_pmu_evt_select table

[Anup Patel]

On Thu, Nov 30, 2023 at 6:14?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> The valid entry count is tracking by hw_event_count so there
> is no need to check the whole table.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>

Looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

> ---
> Changes v2 -> v3:
>   - New patch
> Changes v3 -> v4:
>   - No change
> ---
>  lib/utils/fdt/fdt_pmu.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/lib/utils/fdt/fdt_pmu.c b/lib/utils/fdt/fdt_pmu.c
> index cf3220f..c531b9a 100644
> --- a/lib/utils/fdt/fdt_pmu.c
> +++ b/lib/utils/fdt/fdt_pmu.c
> @@ -25,7 +25,7 @@ uint64_t fdt_pmu_get_select_value(uint32_t event_idx)
>         int i;
>         struct fdt_pmu_hw_event_select_map *event;
>
> -       for (i = 0; i < SBI_PMU_HW_EVENT_MAX; i++) {
> +       for (i = 0; i < hw_event_count; i++) {
>                 event = &fdt_pmu_evt_select[i];
>                 if (event->eidx == event_idx)
>                         return event->select;
> --
> 2.34.1
>

[PATCH v4 14/15] platform: andes: Add Andes default PMU mapping support

[Yu Chien Peter Lin]

Provide the andes_pmu_setup() to populate default mappings in
hw_event_map[] and fdt_pmu_evt_select[] when fdt_pmu_setup()
cannot find the PMU node.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v2 -> v3:
  - New patch
  - Drop fdt_add_pmu_mappings() (suggested by Anup [1])
Changes v3 -> v4:
  - Include TB tag from Prabhakar
  - Staticize andes_pmu_setup() when CONFIG_PLATFORM_ANDES_AE350 is not set

[1] https://patchwork.ozlabs.org/project/opensbi/patch/20231019113713.3508153-11-peterlin at andestech.com/
---
 include/sbi/sbi_ecall_interface.h          |   5 +
 platform/generic/Kconfig                   |   2 +
 platform/generic/andes/Kconfig             |   7 +
 platform/generic/andes/andes_hpm.c         | 405 +++++++++++++++++++++
 platform/generic/andes/objects.mk          |   1 +
 platform/generic/include/andes/andes_hpm.h |  69 ++++
 6 files changed, 489 insertions(+)
 create mode 100644 platform/generic/andes/andes_hpm.c

diff --git a/include/sbi/sbi_ecall_interface.h b/include/sbi/sbi_ecall_interface.h
index 1fe469e..89187e7 100644
--- a/include/sbi/sbi_ecall_interface.h
+++ b/include/sbi/sbi_ecall_interface.h
@@ -155,6 +155,11 @@ enum sbi_pmu_hw_cache_op_result_id {
 	SBI_PMU_HW_CACHE_RESULT_MAX,
 };
 
+#define SBI_PMU_HW_CACHE_EVENT_IDX(id, op, res) \
+	(SBI_PMU_EVENT_TYPE_HW_CACHE << SBI_PMU_EVENT_IDX_TYPE_OFFSET | \
+	SBI_PMU_HW_CACHE_##id << 3 | SBI_PMU_HW_CACHE_OP_##op << 1 | \
+	SBI_PMU_HW_CACHE_RESULT_##res)
+
 /**
  * Special "firmware" events provided by the OpenSBI, even if the hardware
  * does not support performance events. These events are encoded as a raw
diff --git a/platform/generic/Kconfig b/platform/generic/Kconfig
index c9b6011..e652645 100644
--- a/platform/generic/Kconfig
+++ b/platform/generic/Kconfig
@@ -32,6 +32,7 @@ config PLATFORM_ALLWINNER_D1
 config PLATFORM_ANDES_AE350
 	bool "Andes AE350 support"
 	select SYS_ATCSMU
+	select ANDES_HPM
 	select ANDES_PMU
 	default n
 
@@ -39,6 +40,7 @@ config PLATFORM_RENESAS_RZFIVE
 	bool "Renesas RZ/Five support"
 	select ANDES45_PMA
 	select ANDES_SBI
+	select ANDES_HPM
 	select ANDES_PMU
 	default n
 
diff --git a/platform/generic/andes/Kconfig b/platform/generic/andes/Kconfig
index 3665b33..eb697a6 100644
--- a/platform/generic/andes/Kconfig
+++ b/platform/generic/andes/Kconfig
@@ -8,6 +8,13 @@ config ANDES_SBI
 	bool "Andes SBI support"
 	default n
 
+config ANDES_HPM
+	bool "Andes HPM support"
+	default n
+	help
+	  This provides default HPM event counter mappings
+	  when a pmu node is missing.
+
 config ANDES_PMU
 	bool "Andes PMU extension (XAndesPMU) support"
 	default n
diff --git a/platform/generic/andes/andes_hpm.c b/platform/generic/andes/andes_hpm.c
new file mode 100644
index 0000000..7fe5ac5
--- /dev/null
+++ b/platform/generic/andes/andes_hpm.c
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: BSD-2-Clause
+/*
+ * andes_hpm.c - Default event mappings and helper routine
+ *
+ * Copyright (c) 2023 Andes Technology Corporation
+ */
+
+#include <andes/andes45.h>
+#include <andes/andes_hpm.h>
+#include <sbi/sbi_ecall_interface.h>
+#include <sbi/sbi_pmu.h>
+#include <sbi_utils/fdt/fdt_pmu.h>
+
+static const struct fdt_pmu_hw_event_select_map andes45_hw_evt_selects[] = {
+	/* Hardware general events (Type #0) */
+	{
+		/* perf: cycles (eidx: 0x1) */
+		.eidx = SBI_PMU_HW_CPU_CYCLES,
+		.select = ANDES_CYCLES
+	},
+	{
+		/* perf: instructions (eidx: 0x2) */
+		.eidx = SBI_PMU_HW_INSTRUCTIONS,
+		.select = ANDES_INSTRET
+	},
+	{
+		/* perf: cache-references (eidx: 0x3) */
+		.eidx = SBI_PMU_HW_CACHE_REFERENCES,
+		.select = ANDES_DCACHE_ACCESS
+	},
+	{
+		/* perf: cache-misses (eidx: 0x4) */
+		.eidx = SBI_PMU_HW_CACHE_MISSES,
+		.select = ANDES_DCACHE_MISS
+	},
+	{
+		/* perf: branches (eidx: 0x5) */
+		.eidx = SBI_PMU_HW_BRANCH_INSTRUCTIONS,
+		.select = ANDES_CONDITION_BR,
+	},
+	{
+		/* perf: branch-misses (eidx: 0x6) */
+		.eidx = SBI_PMU_HW_BRANCH_MISSES,
+		.select = ANDES_MISPREDICT_CONDITION_BR,
+	},
+	/* Hardware cache events (Type #1) */
+	{
+		/* perf: L1-dcache-loads (eidx: 0x10000) */
+		.eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, READ, ACCESS),
+		.select = ANDES_DCACHE_LOAD_ACCESS
+	},
+	{
+		/* perf: L1-dcache-loads-misses (eidx: 0x10001) */
+		.eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, READ, MISS),
+		.select = ANDES_DCACHE_LOAD_MISS
+	},
+	{
+		/* perf: L1-dcache-stores (eidx: 0x10002) */
+		.eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, WRITE, ACCESS),
+		.select = ANDES_DCACHE_STORE_ACCESS
+	},
+	{
+		/* perf: L1-dcache-store-misses (eidx: 0x10003) */
+		.eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, WRITE, MISS),
+		.select = ANDES_DCACHE_STORE_MISS
+	},
+	{
+		/* perf: L1-icache-load (eidx: 0x10008) */
+		.eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, ACCESS),
+		.select = ANDES_ICACHE_ACCESS
+	},
+	{
+		/* perf: L1-icache-load-misses (eidx: 0x10009) */
+		.eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, MISS),
+		.select = ANDES_ICACHE_MISS
+	},
+};
+
+static const struct fdt_pmu_hw_event_counter_map andes45_hw_evt_counters[] = {
+	{
+		/* perf: cycles (eidx: 0x1) */
+		.eidx_start = SBI_PMU_HW_CPU_CYCLES,
+		/* perf: branch-misses (eidx: 0x6) */
+		.eidx_end = SBI_PMU_HW_BRANCH_MISSES,
+		.ctr_map  = ANDES_MHPM_MAP,
+	},
+	{
+		/* perf: L1-dcache-loads (eidx: 0x10000) */
+		.eidx_start = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, READ, ACCESS),
+		/* perf: L1-dcache-store-misses (eidx: 0x10003) */
+		.eidx_end = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, WRITE, MISS),
+		.ctr_map  = ANDES_MHPM_MAP,
+	},
+	{
+		/* perf: L1-icache-load (eidx: 0x10008) */
+		.eidx_start = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, ACCESS),
+		/* perf: L1-icache-load-misses (eidx: 0x10009) */
+		.eidx_end = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, MISS),
+		.ctr_map  = ANDES_MHPM_MAP,
+	},
+};
+
+static const struct fdt_pmu_raw_event_counter_map andes45_raw_evt_counters[] = {
+	{
+		.select = ANDES_CYCLES,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_INSTRET,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_INT_LOAD_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_INT_STORE_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_ATOMIC_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_SYS_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_INT_COMPUTE_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_CONDITION_BR,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_TAKEN_CONDITION_BR,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_JAL_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_JALR_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_RET_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_CONTROL_TRANS_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_EX9_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_INT_MUL_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_INT_DIV_REMAINDER_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_FLOAT_LOAD_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_FLOAT_STORE_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_FLOAT_ADD_SUB_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_FLOAT_MUL_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_FLOAT_FUSED_MULADD_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_FLOAT_DIV_SQUARE_ROOT_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_OTHER_FLOAT_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_INT_MUL_AND_SUB_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_RETIRED_OP,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_ILM_ACCESS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_DLM_ACCESS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_ICACHE_ACCESS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_ICACHE_MISS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_DCACHE_ACCESS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_DCACHE_MISS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_DCACHE_LOAD_ACCESS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_DCACHE_LOAD_MISS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_DCACHE_STORE_ACCESS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_DCACHE_STORE_MISS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_DCACHE_WB,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_CYCLE_WAIT_ICACHE_FILL,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_CYCLE_WAIT_DCACHE_FILL,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_UNCACHED_IFETCH_FROM_BUS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_UNCACHED_LOAD_FROM_BUS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_CYCLE_WAIT_UNCACHED_IFETCH,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_CYCLE_WAIT_UNCACHED_LOAD,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_MAIN_ITLB_ACCESS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_MAIN_ITLB_MISS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_MAIN_DTLB_ACCESS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_MAIN_DTLB_MISS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_CYCLE_WAIT_ITLB_FILL,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_PIPE_STALL_CYCLE_DTLB_MISS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_HW_PREFETCH_BUS_ACCESS,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_MISPREDICT_CONDITION_BR,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_MISPREDICT_TAKE_CONDITION_BR,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+	{
+		.select = ANDES_MISPREDICT_TARGET_RET_INST,
+		.select_mask = ANDES_RAW_EVENT_MASK,
+		.ctr_map = ANDES_MHPM_MAP
+	},
+};
+
+int andes_pmu_setup(void)
+{
+	int i, rc;
+	struct fdt_pmu_hw_event_select_map *event;
+
+	/*
+	 * At the moment, simply create mapping for any 45-series core
+	 * based on marchid, we may check and differentiate the mapping
+	 * by mimpid.
+	 */
+	if (!is_andes(45))
+		return 0;
+
+	for (i = 0; i < array_size(andes45_hw_evt_counters); i++) {
+		rc = sbi_pmu_add_hw_event_counter_map(
+			andes45_hw_evt_counters[i].eidx_start,
+			andes45_hw_evt_counters[i].eidx_end,
+			andes45_hw_evt_counters[i].ctr_map);
+		if (rc)
+			return rc;
+	}
+
+	for (i = 0; i < array_size(andes45_hw_evt_selects); i++) {
+		event	      = &fdt_pmu_evt_select[hw_event_count];
+		event->eidx   = andes45_hw_evt_selects[i].eidx;
+		event->select = andes45_hw_evt_selects[i].select;
+		hw_event_count++;
+	}
+
+	for (i = 0; i < array_size(andes45_raw_evt_counters); i++) {
+		rc = sbi_pmu_add_raw_event_counter_map(
+			andes45_raw_evt_counters[i].select,
+			andes45_raw_evt_counters[i].select_mask,
+			andes45_raw_evt_counters[i].ctr_map);
+		if (rc)
+			return rc;
+	}
+
+	return 0;
+}
diff --git a/platform/generic/andes/objects.mk b/platform/generic/andes/objects.mk
index 6a8c66c..57caaf6 100644
--- a/platform/generic/andes/objects.mk
+++ b/platform/generic/andes/objects.mk
@@ -8,3 +8,4 @@ platform-objs-$(CONFIG_PLATFORM_ANDES_AE350) += andes/ae350.o andes/sleep.o
 platform-objs-$(CONFIG_ANDES45_PMA) += andes/andes45-pma.o
 platform-objs-$(CONFIG_ANDES_SBI) += andes/andes_sbi.o
 platform-objs-$(CONFIG_ANDES_PMU) += andes/andes_pmu.o
+platform-objs-$(CONFIG_ANDES_HPM) += andes/andes_hpm.o
diff --git a/platform/generic/include/andes/andes_hpm.h b/platform/generic/include/andes/andes_hpm.h
index b4d71b9..0ae391f 100644
--- a/platform/generic/include/andes/andes_hpm.h
+++ b/platform/generic/include/andes/andes_hpm.h
@@ -7,6 +7,75 @@
 #ifndef _ANDES_HPM_H_
 #define _ANDES_HPM_H_
 
+#define ANDES_MHPM_MAP		0x78
+#define ANDES_RAW_EVENT_MASK	~0ULL
+
+/* Event selector for instruction commit events */
+#define ANDES_CYCLES				0x10
+#define ANDES_INSTRET				0x20
+#define ANDES_INT_LOAD_INST			0x30
+#define ANDES_INT_STORE_INST			0x40
+#define ANDES_ATOMIC_INST			0x50
+#define ANDES_SYS_INST				0x60
+#define ANDES_INT_COMPUTE_INST			0x70
+#define ANDES_CONDITION_BR			0x80
+#define ANDES_TAKEN_CONDITION_BR		0x90
+#define ANDES_JAL_INST				0xA0
+#define ANDES_JALR_INST				0xB0
+#define ANDES_RET_INST				0xC0
+#define ANDES_CONTROL_TRANS_INST		0xD0
+#define ANDES_EX9_INST				0xE0
+#define ANDES_INT_MUL_INST			0xF0
+#define ANDES_INT_DIV_REMAINDER_INST		0x100
+#define ANDES_FLOAT_LOAD_INST			0x110
+#define ANDES_FLOAT_STORE_INST			0x120
+#define ANDES_FLOAT_ADD_SUB_INST		0x130
+#define ANDES_FLOAT_MUL_INST			0x140
+#define ANDES_FLOAT_FUSED_MULADD_INST		0x150
+#define ANDES_FLOAT_DIV_SQUARE_ROOT_INST	0x160
+#define ANDES_OTHER_FLOAT_INST			0x170
+#define ANDES_INT_MUL_AND_SUB_INST		0x180
+#define ANDES_RETIRED_OP			0x190
+
+/* Event selector for memory system events */
+#define ANDES_ILM_ACCESS			0x01
+#define ANDES_DLM_ACCESS			0x11
+#define ANDES_ICACHE_ACCESS			0x21
+#define ANDES_ICACHE_MISS			0x31
+#define ANDES_DCACHE_ACCESS			0x41
+#define ANDES_DCACHE_MISS			0x51
+#define ANDES_DCACHE_LOAD_ACCESS		0x61
+#define ANDES_DCACHE_LOAD_MISS			0x71
+#define ANDES_DCACHE_STORE_ACCESS		0x81
+#define ANDES_DCACHE_STORE_MISS			0x91
+#define ANDES_DCACHE_WB				0xA1
+#define ANDES_CYCLE_WAIT_ICACHE_FILL		0xB1
+#define ANDES_CYCLE_WAIT_DCACHE_FILL		0xC1
+#define ANDES_UNCACHED_IFETCH_FROM_BUS		0xD1
+#define ANDES_UNCACHED_LOAD_FROM_BUS		0xE1
+#define ANDES_CYCLE_WAIT_UNCACHED_IFETCH	0xF1
+#define ANDES_CYCLE_WAIT_UNCACHED_LOAD		0x101
+#define ANDES_MAIN_ITLB_ACCESS			0x111
+#define ANDES_MAIN_ITLB_MISS			0x121
+#define ANDES_MAIN_DTLB_ACCESS			0x131
+#define ANDES_MAIN_DTLB_MISS			0x141
+#define ANDES_CYCLE_WAIT_ITLB_FILL		0x151
+#define ANDES_PIPE_STALL_CYCLE_DTLB_MISS	0x161
+#define ANDES_HW_PREFETCH_BUS_ACCESS		0x171
+
+/* Event selector for microarchitecture events */
+#define ANDES_MISPREDICT_CONDITION_BR		0x02
+#define ANDES_MISPREDICT_TAKE_CONDITION_BR	0x12
+#define ANDES_MISPREDICT_TARGET_RET_INST	0x22
+
+#ifdef CONFIG_ANDES_HPM
+
+int andes_pmu_setup(void);
+
+#else
+
 static inline int andes_pmu_setup(void) { return 0; }
 
+#endif /* CONFIG_ANDES_HPM */
+
 #endif /* _ANDES_HPM_H_ */
-- 
2.34.1

[PATCH v4 14/15] platform: andes: Add Andes default PMU mapping support

[Atish Patra]

On Thu, Nov 30, 2023 at 4:44?AM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> Provide the andes_pmu_setup() to populate default mappings in
> hw_event_map[] and fdt_pmu_evt_select[] when fdt_pmu_setup()
> cannot find the PMU node.
>
> Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> Changes v2 -> v3:
>   - New patch
>   - Drop fdt_add_pmu_mappings() (suggested by Anup [1])
> Changes v3 -> v4:
>   - Include TB tag from Prabhakar
>   - Staticize andes_pmu_setup() when CONFIG_PLATFORM_ANDES_AE350 is not set
>
> [1] https://patchwork.ozlabs.org/project/opensbi/patch/20231019113713.3508153-11-peterlin at andestech.com/
> ---
>  include/sbi/sbi_ecall_interface.h          |   5 +
>  platform/generic/Kconfig                   |   2 +
>  platform/generic/andes/Kconfig             |   7 +
>  platform/generic/andes/andes_hpm.c         | 405 +++++++++++++++++++++
>  platform/generic/andes/objects.mk          |   1 +
>  platform/generic/include/andes/andes_hpm.h |  69 ++++
>  6 files changed, 489 insertions(+)
>  create mode 100644 platform/generic/andes/andes_hpm.c
>
> diff --git a/include/sbi/sbi_ecall_interface.h b/include/sbi/sbi_ecall_interface.h
> index 1fe469e..89187e7 100644
> --- a/include/sbi/sbi_ecall_interface.h
> +++ b/include/sbi/sbi_ecall_interface.h
> @@ -155,6 +155,11 @@ enum sbi_pmu_hw_cache_op_result_id {
>         SBI_PMU_HW_CACHE_RESULT_MAX,
>  };
>
> +#define SBI_PMU_HW_CACHE_EVENT_IDX(id, op, res) \
> +       (SBI_PMU_EVENT_TYPE_HW_CACHE << SBI_PMU_EVENT_IDX_TYPE_OFFSET | \
> +       SBI_PMU_HW_CACHE_##id << 3 | SBI_PMU_HW_CACHE_OP_##op << 1 | \
> +       SBI_PMU_HW_CACHE_RESULT_##res)
> +
>  /**
>   * Special "firmware" events provided by the OpenSBI, even if the hardware
>   * does not support performance events. These events are encoded as a raw
> diff --git a/platform/generic/Kconfig b/platform/generic/Kconfig
> index c9b6011..e652645 100644
> --- a/platform/generic/Kconfig
> +++ b/platform/generic/Kconfig
> @@ -32,6 +32,7 @@ config PLATFORM_ALLWINNER_D1
>  config PLATFORM_ANDES_AE350
>         bool "Andes AE350 support"
>         select SYS_ATCSMU
> +       select ANDES_HPM
>         select ANDES_PMU
>         default n
>
> @@ -39,6 +40,7 @@ config PLATFORM_RENESAS_RZFIVE
>         bool "Renesas RZ/Five support"
>         select ANDES45_PMA
>         select ANDES_SBI
> +       select ANDES_HPM
>         select ANDES_PMU
>         default n
>
> diff --git a/platform/generic/andes/Kconfig b/platform/generic/andes/Kconfig
> index 3665b33..eb697a6 100644
> --- a/platform/generic/andes/Kconfig
> +++ b/platform/generic/andes/Kconfig
> @@ -8,6 +8,13 @@ config ANDES_SBI
>         bool "Andes SBI support"
>         default n
>
> +config ANDES_HPM
> +       bool "Andes HPM support"
> +       default n
> +       help
> +         This provides default HPM event counter mappings
> +         when a pmu node is missing.
> +
>  config ANDES_PMU
>         bool "Andes PMU extension (XAndesPMU) support"
>         default n
> diff --git a/platform/generic/andes/andes_hpm.c b/platform/generic/andes/andes_hpm.c
> new file mode 100644
> index 0000000..7fe5ac5
> --- /dev/null
> +++ b/platform/generic/andes/andes_hpm.c
> @@ -0,0 +1,405 @@
> +// SPDX-License-Identifier: BSD-2-Clause
> +/*
> + * andes_hpm.c - Default event mappings and helper routine
> + *
> + * Copyright (c) 2023 Andes Technology Corporation
> + */
> +
> +#include <andes/andes45.h>
> +#include <andes/andes_hpm.h>
> +#include <sbi/sbi_ecall_interface.h>
> +#include <sbi/sbi_pmu.h>
> +#include <sbi_utils/fdt/fdt_pmu.h>
> +
> +static const struct fdt_pmu_hw_event_select_map andes45_hw_evt_selects[] = {
> +       /* Hardware general events (Type #0) */
> +       {
> +               /* perf: cycles (eidx: 0x1) */
> +               .eidx = SBI_PMU_HW_CPU_CYCLES,
> +               .select = ANDES_CYCLES
> +       },
> +       {
> +               /* perf: instructions (eidx: 0x2) */
> +               .eidx = SBI_PMU_HW_INSTRUCTIONS,
> +               .select = ANDES_INSTRET
> +       },
> +       {
> +               /* perf: cache-references (eidx: 0x3) */
> +               .eidx = SBI_PMU_HW_CACHE_REFERENCES,
> +               .select = ANDES_DCACHE_ACCESS
> +       },
> +       {
> +               /* perf: cache-misses (eidx: 0x4) */
> +               .eidx = SBI_PMU_HW_CACHE_MISSES,
> +               .select = ANDES_DCACHE_MISS
> +       },
> +       {
> +               /* perf: branches (eidx: 0x5) */
> +               .eidx = SBI_PMU_HW_BRANCH_INSTRUCTIONS,
> +               .select = ANDES_CONDITION_BR,
> +       },
> +       {
> +               /* perf: branch-misses (eidx: 0x6) */
> +               .eidx = SBI_PMU_HW_BRANCH_MISSES,
> +               .select = ANDES_MISPREDICT_CONDITION_BR,
> +       },
> +       /* Hardware cache events (Type #1) */
> +       {
> +               /* perf: L1-dcache-loads (eidx: 0x10000) */
> +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, READ, ACCESS),
> +               .select = ANDES_DCACHE_LOAD_ACCESS
> +       },
> +       {
> +               /* perf: L1-dcache-loads-misses (eidx: 0x10001) */
> +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, READ, MISS),
> +               .select = ANDES_DCACHE_LOAD_MISS
> +       },
> +       {
> +               /* perf: L1-dcache-stores (eidx: 0x10002) */
> +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, WRITE, ACCESS),
> +               .select = ANDES_DCACHE_STORE_ACCESS
> +       },
> +       {
> +               /* perf: L1-dcache-store-misses (eidx: 0x10003) */
> +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, WRITE, MISS),
> +               .select = ANDES_DCACHE_STORE_MISS
> +       },
> +       {
> +               /* perf: L1-icache-load (eidx: 0x10008) */
> +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, ACCESS),
> +               .select = ANDES_ICACHE_ACCESS
> +       },
> +       {
> +               /* perf: L1-icache-load-misses (eidx: 0x10009) */
> +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, MISS),
> +               .select = ANDES_ICACHE_MISS
> +       },
> +};
> +

Is there a specific reason why the platform code populates instead of
a PMU DT node added by whoever generates the DT (not at boot time in
OpenSBI in your earlier version versions)?

> +static const struct fdt_pmu_hw_event_counter_map andes45_hw_evt_counters[] = {
> +       {
> +               /* perf: cycles (eidx: 0x1) */
> +               .eidx_start = SBI_PMU_HW_CPU_CYCLES,
> +               /* perf: branch-misses (eidx: 0x6) */
> +               .eidx_end = SBI_PMU_HW_BRANCH_MISSES,
> +               .ctr_map  = ANDES_MHPM_MAP,
> +       },
> +       {
> +               /* perf: L1-dcache-loads (eidx: 0x10000) */
> +               .eidx_start = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, READ, ACCESS),
> +               /* perf: L1-dcache-store-misses (eidx: 0x10003) */
> +               .eidx_end = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, WRITE, MISS),
> +               .ctr_map  = ANDES_MHPM_MAP,
> +       },
> +       {
> +               /* perf: L1-icache-load (eidx: 0x10008) */
> +               .eidx_start = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, ACCESS),
> +               /* perf: L1-icache-load-misses (eidx: 0x10009) */
> +               .eidx_end = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, MISS),
> +               .ctr_map  = ANDES_MHPM_MAP,
> +       },
> +};
> +
> +static const struct fdt_pmu_raw_event_counter_map andes45_raw_evt_counters[] = {
> +       {
> +               .select = ANDES_CYCLES,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_INSTRET,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_INT_LOAD_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_INT_STORE_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_ATOMIC_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_SYS_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_INT_COMPUTE_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_CONDITION_BR,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_TAKEN_CONDITION_BR,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_JAL_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_JALR_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_RET_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_CONTROL_TRANS_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_EX9_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_INT_MUL_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_INT_DIV_REMAINDER_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_FLOAT_LOAD_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_FLOAT_STORE_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_FLOAT_ADD_SUB_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_FLOAT_MUL_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_FLOAT_FUSED_MULADD_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_FLOAT_DIV_SQUARE_ROOT_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_OTHER_FLOAT_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_INT_MUL_AND_SUB_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_RETIRED_OP,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_ILM_ACCESS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_DLM_ACCESS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_ICACHE_ACCESS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_ICACHE_MISS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_DCACHE_ACCESS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_DCACHE_MISS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_DCACHE_LOAD_ACCESS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_DCACHE_LOAD_MISS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_DCACHE_STORE_ACCESS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_DCACHE_STORE_MISS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_DCACHE_WB,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_CYCLE_WAIT_ICACHE_FILL,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_CYCLE_WAIT_DCACHE_FILL,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_UNCACHED_IFETCH_FROM_BUS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_UNCACHED_LOAD_FROM_BUS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_CYCLE_WAIT_UNCACHED_IFETCH,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_CYCLE_WAIT_UNCACHED_LOAD,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_MAIN_ITLB_ACCESS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_MAIN_ITLB_MISS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_MAIN_DTLB_ACCESS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_MAIN_DTLB_MISS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_CYCLE_WAIT_ITLB_FILL,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_PIPE_STALL_CYCLE_DTLB_MISS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_HW_PREFETCH_BUS_ACCESS,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_MISPREDICT_CONDITION_BR,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_MISPREDICT_TAKE_CONDITION_BR,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +       {
> +               .select = ANDES_MISPREDICT_TARGET_RET_INST,
> +               .select_mask = ANDES_RAW_EVENT_MASK,
> +               .ctr_map = ANDES_MHPM_MAP
> +       },
> +};
> +
> +int andes_pmu_setup(void)
> +{
> +       int i, rc;
> +       struct fdt_pmu_hw_event_select_map *event;
> +
> +       /*
> +        * At the moment, simply create mapping for any 45-series core
> +        * based on marchid, we may check and differentiate the mapping
> +        * by mimpid.
> +        */
> +       if (!is_andes(45))

nit: A macro would be nice here.

> +               return 0;
> +
> +       for (i = 0; i < array_size(andes45_hw_evt_counters); i++) {
> +               rc = sbi_pmu_add_hw_event_counter_map(
> +                       andes45_hw_evt_counters[i].eidx_start,
> +                       andes45_hw_evt_counters[i].eidx_end,
> +                       andes45_hw_evt_counters[i].ctr_map);
> +               if (rc)
> +                       return rc;
> +       }
> +
> +       for (i = 0; i < array_size(andes45_hw_evt_selects); i++) {
> +               event         = &fdt_pmu_evt_select[hw_event_count];
> +               event->eidx   = andes45_hw_evt_selects[i].eidx;
> +               event->select = andes45_hw_evt_selects[i].select;
> +               hw_event_count++;
> +       }
> +
> +       for (i = 0; i < array_size(andes45_raw_evt_counters); i++) {
> +               rc = sbi_pmu_add_raw_event_counter_map(
> +                       andes45_raw_evt_counters[i].select,
> +                       andes45_raw_evt_counters[i].select_mask,
> +                       andes45_raw_evt_counters[i].ctr_map);
> +               if (rc)
> +                       return rc;
> +       }
> +
> +       return 0;
> +}
> diff --git a/platform/generic/andes/objects.mk b/platform/generic/andes/objects.mk
> index 6a8c66c..57caaf6 100644
> --- a/platform/generic/andes/objects.mk
> +++ b/platform/generic/andes/objects.mk
> @@ -8,3 +8,4 @@ platform-objs-$(CONFIG_PLATFORM_ANDES_AE350) += andes/ae350.o andes/sleep.o
>  platform-objs-$(CONFIG_ANDES45_PMA) += andes/andes45-pma.o
>  platform-objs-$(CONFIG_ANDES_SBI) += andes/andes_sbi.o
>  platform-objs-$(CONFIG_ANDES_PMU) += andes/andes_pmu.o
> +platform-objs-$(CONFIG_ANDES_HPM) += andes/andes_hpm.o
> diff --git a/platform/generic/include/andes/andes_hpm.h b/platform/generic/include/andes/andes_hpm.h
> index b4d71b9..0ae391f 100644
> --- a/platform/generic/include/andes/andes_hpm.h
> +++ b/platform/generic/include/andes/andes_hpm.h
> @@ -7,6 +7,75 @@
>  #ifndef _ANDES_HPM_H_
>  #define _ANDES_HPM_H_
>
> +#define ANDES_MHPM_MAP         0x78
> +#define ANDES_RAW_EVENT_MASK   ~0ULL
> +
> +/* Event selector for instruction commit events */
> +#define ANDES_CYCLES                           0x10
> +#define ANDES_INSTRET                          0x20
> +#define ANDES_INT_LOAD_INST                    0x30
> +#define ANDES_INT_STORE_INST                   0x40
> +#define ANDES_ATOMIC_INST                      0x50
> +#define ANDES_SYS_INST                         0x60
> +#define ANDES_INT_COMPUTE_INST                 0x70
> +#define ANDES_CONDITION_BR                     0x80
> +#define ANDES_TAKEN_CONDITION_BR               0x90
> +#define ANDES_JAL_INST                         0xA0
> +#define ANDES_JALR_INST                                0xB0
> +#define ANDES_RET_INST                         0xC0
> +#define ANDES_CONTROL_TRANS_INST               0xD0
> +#define ANDES_EX9_INST                         0xE0
> +#define ANDES_INT_MUL_INST                     0xF0
> +#define ANDES_INT_DIV_REMAINDER_INST           0x100
> +#define ANDES_FLOAT_LOAD_INST                  0x110
> +#define ANDES_FLOAT_STORE_INST                 0x120
> +#define ANDES_FLOAT_ADD_SUB_INST               0x130
> +#define ANDES_FLOAT_MUL_INST                   0x140
> +#define ANDES_FLOAT_FUSED_MULADD_INST          0x150
> +#define ANDES_FLOAT_DIV_SQUARE_ROOT_INST       0x160
> +#define ANDES_OTHER_FLOAT_INST                 0x170
> +#define ANDES_INT_MUL_AND_SUB_INST             0x180
> +#define ANDES_RETIRED_OP                       0x190
> +
> +/* Event selector for memory system events */
> +#define ANDES_ILM_ACCESS                       0x01
> +#define ANDES_DLM_ACCESS                       0x11
> +#define ANDES_ICACHE_ACCESS                    0x21
> +#define ANDES_ICACHE_MISS                      0x31
> +#define ANDES_DCACHE_ACCESS                    0x41
> +#define ANDES_DCACHE_MISS                      0x51
> +#define ANDES_DCACHE_LOAD_ACCESS               0x61
> +#define ANDES_DCACHE_LOAD_MISS                 0x71
> +#define ANDES_DCACHE_STORE_ACCESS              0x81
> +#define ANDES_DCACHE_STORE_MISS                        0x91
> +#define ANDES_DCACHE_WB                                0xA1
> +#define ANDES_CYCLE_WAIT_ICACHE_FILL           0xB1
> +#define ANDES_CYCLE_WAIT_DCACHE_FILL           0xC1
> +#define ANDES_UNCACHED_IFETCH_FROM_BUS         0xD1
> +#define ANDES_UNCACHED_LOAD_FROM_BUS           0xE1
> +#define ANDES_CYCLE_WAIT_UNCACHED_IFETCH       0xF1
> +#define ANDES_CYCLE_WAIT_UNCACHED_LOAD         0x101
> +#define ANDES_MAIN_ITLB_ACCESS                 0x111
> +#define ANDES_MAIN_ITLB_MISS                   0x121
> +#define ANDES_MAIN_DTLB_ACCESS                 0x131
> +#define ANDES_MAIN_DTLB_MISS                   0x141
> +#define ANDES_CYCLE_WAIT_ITLB_FILL             0x151
> +#define ANDES_PIPE_STALL_CYCLE_DTLB_MISS       0x161
> +#define ANDES_HW_PREFETCH_BUS_ACCESS           0x171
> +
> +/* Event selector for microarchitecture events */
> +#define ANDES_MISPREDICT_CONDITION_BR          0x02
> +#define ANDES_MISPREDICT_TAKE_CONDITION_BR     0x12
> +#define ANDES_MISPREDICT_TARGET_RET_INST       0x22
> +
> +#ifdef CONFIG_ANDES_HPM
> +
> +int andes_pmu_setup(void);
> +
> +#else
> +
>  static inline int andes_pmu_setup(void) { return 0; }
>
> +#endif /* CONFIG_ANDES_HPM */
> +
>  #endif /* _ANDES_HPM_H_ */
> --
> 2.34.1
>


-- 
Regards,
Atish

[PATCH v4 14/15] platform: andes: Add Andes default PMU mapping support

[Yu-Chien Peter Lin]

On Tue, Dec 05, 2023 at 05:53:19PM -0800, Atish Patra wrote:
> On Thu, Nov 30, 2023 at 4:44?AM Yu Chien Peter Lin
> <peterlin@andestech.com> wrote:
> >
> > Provide the andes_pmu_setup() to populate default mappings in
> > hw_event_map[] and fdt_pmu_evt_select[] when fdt_pmu_setup()
> > cannot find the PMU node.
> >
> > Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
> > Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > Changes v2 -> v3:
> >   - New patch
> >   - Drop fdt_add_pmu_mappings() (suggested by Anup [1])
> > Changes v3 -> v4:
> >   - Include TB tag from Prabhakar
> >   - Staticize andes_pmu_setup() when CONFIG_PLATFORM_ANDES_AE350 is not set
> >
> > [1] https://patchwork.ozlabs.org/project/opensbi/patch/20231019113713.3508153-11-peterlin at andestech.com/
> > ---
> >  include/sbi/sbi_ecall_interface.h          |   5 +
> >  platform/generic/Kconfig                   |   2 +
> >  platform/generic/andes/Kconfig             |   7 +
> >  platform/generic/andes/andes_hpm.c         | 405 +++++++++++++++++++++
> >  platform/generic/andes/objects.mk          |   1 +
> >  platform/generic/include/andes/andes_hpm.h |  69 ++++
> >  6 files changed, 489 insertions(+)
> >  create mode 100644 platform/generic/andes/andes_hpm.c
> >
> > diff --git a/include/sbi/sbi_ecall_interface.h b/include/sbi/sbi_ecall_interface.h
> > index 1fe469e..89187e7 100644
> > --- a/include/sbi/sbi_ecall_interface.h
> > +++ b/include/sbi/sbi_ecall_interface.h
> > @@ -155,6 +155,11 @@ enum sbi_pmu_hw_cache_op_result_id {
> >         SBI_PMU_HW_CACHE_RESULT_MAX,
> >  };
> >
> > +#define SBI_PMU_HW_CACHE_EVENT_IDX(id, op, res) \
> > +       (SBI_PMU_EVENT_TYPE_HW_CACHE << SBI_PMU_EVENT_IDX_TYPE_OFFSET | \
> > +       SBI_PMU_HW_CACHE_##id << 3 | SBI_PMU_HW_CACHE_OP_##op << 1 | \
> > +       SBI_PMU_HW_CACHE_RESULT_##res)
> > +
> >  /**
> >   * Special "firmware" events provided by the OpenSBI, even if the hardware
> >   * does not support performance events. These events are encoded as a raw
> > diff --git a/platform/generic/Kconfig b/platform/generic/Kconfig
> > index c9b6011..e652645 100644
> > --- a/platform/generic/Kconfig
> > +++ b/platform/generic/Kconfig
> > @@ -32,6 +32,7 @@ config PLATFORM_ALLWINNER_D1
> >  config PLATFORM_ANDES_AE350
> >         bool "Andes AE350 support"
> >         select SYS_ATCSMU
> > +       select ANDES_HPM
> >         select ANDES_PMU
> >         default n
> >
> > @@ -39,6 +40,7 @@ config PLATFORM_RENESAS_RZFIVE
> >         bool "Renesas RZ/Five support"
> >         select ANDES45_PMA
> >         select ANDES_SBI
> > +       select ANDES_HPM
> >         select ANDES_PMU
> >         default n
> >
> > diff --git a/platform/generic/andes/Kconfig b/platform/generic/andes/Kconfig
> > index 3665b33..eb697a6 100644
> > --- a/platform/generic/andes/Kconfig
> > +++ b/platform/generic/andes/Kconfig
> > @@ -8,6 +8,13 @@ config ANDES_SBI
> >         bool "Andes SBI support"
> >         default n
> >
> > +config ANDES_HPM
> > +       bool "Andes HPM support"
> > +       default n
> > +       help
> > +         This provides default HPM event counter mappings
> > +         when a pmu node is missing.
> > +
> >  config ANDES_PMU
> >         bool "Andes PMU extension (XAndesPMU) support"
> >         default n
> > diff --git a/platform/generic/andes/andes_hpm.c b/platform/generic/andes/andes_hpm.c
> > new file mode 100644
> > index 0000000..7fe5ac5
> > --- /dev/null
> > +++ b/platform/generic/andes/andes_hpm.c
> > @@ -0,0 +1,405 @@
> > +// SPDX-License-Identifier: BSD-2-Clause
> > +/*
> > + * andes_hpm.c - Default event mappings and helper routine
> > + *
> > + * Copyright (c) 2023 Andes Technology Corporation
> > + */
> > +
> > +#include <andes/andes45.h>
> > +#include <andes/andes_hpm.h>
> > +#include <sbi/sbi_ecall_interface.h>
> > +#include <sbi/sbi_pmu.h>
> > +#include <sbi_utils/fdt/fdt_pmu.h>
> > +
> > +static const struct fdt_pmu_hw_event_select_map andes45_hw_evt_selects[] = {
> > +       /* Hardware general events (Type #0) */
> > +       {
> > +               /* perf: cycles (eidx: 0x1) */
> > +               .eidx = SBI_PMU_HW_CPU_CYCLES,
> > +               .select = ANDES_CYCLES
> > +       },
> > +       {
> > +               /* perf: instructions (eidx: 0x2) */
> > +               .eidx = SBI_PMU_HW_INSTRUCTIONS,
> > +               .select = ANDES_INSTRET
> > +       },
> > +       {
> > +               /* perf: cache-references (eidx: 0x3) */
> > +               .eidx = SBI_PMU_HW_CACHE_REFERENCES,
> > +               .select = ANDES_DCACHE_ACCESS
> > +       },
> > +       {
> > +               /* perf: cache-misses (eidx: 0x4) */
> > +               .eidx = SBI_PMU_HW_CACHE_MISSES,
> > +               .select = ANDES_DCACHE_MISS
> > +       },
> > +       {
> > +               /* perf: branches (eidx: 0x5) */
> > +               .eidx = SBI_PMU_HW_BRANCH_INSTRUCTIONS,
> > +               .select = ANDES_CONDITION_BR,
> > +       },
> > +       {
> > +               /* perf: branch-misses (eidx: 0x6) */
> > +               .eidx = SBI_PMU_HW_BRANCH_MISSES,
> > +               .select = ANDES_MISPREDICT_CONDITION_BR,
> > +       },
> > +       /* Hardware cache events (Type #1) */
> > +       {
> > +               /* perf: L1-dcache-loads (eidx: 0x10000) */
> > +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, READ, ACCESS),
> > +               .select = ANDES_DCACHE_LOAD_ACCESS
> > +       },
> > +       {
> > +               /* perf: L1-dcache-loads-misses (eidx: 0x10001) */
> > +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, READ, MISS),
> > +               .select = ANDES_DCACHE_LOAD_MISS
> > +       },
> > +       {
> > +               /* perf: L1-dcache-stores (eidx: 0x10002) */
> > +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, WRITE, ACCESS),
> > +               .select = ANDES_DCACHE_STORE_ACCESS
> > +       },
> > +       {
> > +               /* perf: L1-dcache-store-misses (eidx: 0x10003) */
> > +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, WRITE, MISS),
> > +               .select = ANDES_DCACHE_STORE_MISS
> > +       },
> > +       {
> > +               /* perf: L1-icache-load (eidx: 0x10008) */
> > +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, ACCESS),
> > +               .select = ANDES_ICACHE_ACCESS
> > +       },
> > +       {
> > +               /* perf: L1-icache-load-misses (eidx: 0x10009) */
> > +               .eidx = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, MISS),
> > +               .select = ANDES_ICACHE_MISS
> > +       },
> > +};
> > +
> 
> Is there a specific reason why the platform code populates instead of
> a PMU DT node added by whoever generates the DT (not at boot time in
> OpenSBI in your earlier version versions)?

Hi Atish,

Either way works for me. I intended to provide a default mapping when
the PMU node is missing. If adding a PMU node is encouraged, I'm OK
to drop PATCH14 and revert PATCH12.

Hi Prabhakar,

Any thought on this?

Thanks.
Peter Lin

> 
> > +static const struct fdt_pmu_hw_event_counter_map andes45_hw_evt_counters[] = {
> > +       {
> > +               /* perf: cycles (eidx: 0x1) */
> > +               .eidx_start = SBI_PMU_HW_CPU_CYCLES,
> > +               /* perf: branch-misses (eidx: 0x6) */
> > +               .eidx_end = SBI_PMU_HW_BRANCH_MISSES,
> > +               .ctr_map  = ANDES_MHPM_MAP,
> > +       },
> > +       {
> > +               /* perf: L1-dcache-loads (eidx: 0x10000) */
> > +               .eidx_start = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, READ, ACCESS),
> > +               /* perf: L1-dcache-store-misses (eidx: 0x10003) */
> > +               .eidx_end = SBI_PMU_HW_CACHE_EVENT_IDX(L1D, WRITE, MISS),
> > +               .ctr_map  = ANDES_MHPM_MAP,
> > +       },
> > +       {
> > +               /* perf: L1-icache-load (eidx: 0x10008) */
> > +               .eidx_start = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, ACCESS),
> > +               /* perf: L1-icache-load-misses (eidx: 0x10009) */
> > +               .eidx_end = SBI_PMU_HW_CACHE_EVENT_IDX(L1I, READ, MISS),
> > +               .ctr_map  = ANDES_MHPM_MAP,
> > +       },
> > +};
> > +
> > +static const struct fdt_pmu_raw_event_counter_map andes45_raw_evt_counters[] = {
> > +       {
> > +               .select = ANDES_CYCLES,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_INSTRET,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_INT_LOAD_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_INT_STORE_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_ATOMIC_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_SYS_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_INT_COMPUTE_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_CONDITION_BR,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_TAKEN_CONDITION_BR,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_JAL_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_JALR_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_RET_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_CONTROL_TRANS_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_EX9_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_INT_MUL_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_INT_DIV_REMAINDER_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_FLOAT_LOAD_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_FLOAT_STORE_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_FLOAT_ADD_SUB_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_FLOAT_MUL_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_FLOAT_FUSED_MULADD_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_FLOAT_DIV_SQUARE_ROOT_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_OTHER_FLOAT_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_INT_MUL_AND_SUB_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_RETIRED_OP,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_ILM_ACCESS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_DLM_ACCESS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_ICACHE_ACCESS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_ICACHE_MISS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_DCACHE_ACCESS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_DCACHE_MISS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_DCACHE_LOAD_ACCESS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_DCACHE_LOAD_MISS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_DCACHE_STORE_ACCESS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_DCACHE_STORE_MISS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_DCACHE_WB,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_CYCLE_WAIT_ICACHE_FILL,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_CYCLE_WAIT_DCACHE_FILL,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_UNCACHED_IFETCH_FROM_BUS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_UNCACHED_LOAD_FROM_BUS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_CYCLE_WAIT_UNCACHED_IFETCH,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_CYCLE_WAIT_UNCACHED_LOAD,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_MAIN_ITLB_ACCESS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_MAIN_ITLB_MISS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_MAIN_DTLB_ACCESS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_MAIN_DTLB_MISS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_CYCLE_WAIT_ITLB_FILL,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_PIPE_STALL_CYCLE_DTLB_MISS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_HW_PREFETCH_BUS_ACCESS,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_MISPREDICT_CONDITION_BR,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_MISPREDICT_TAKE_CONDITION_BR,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +       {
> > +               .select = ANDES_MISPREDICT_TARGET_RET_INST,
> > +               .select_mask = ANDES_RAW_EVENT_MASK,
> > +               .ctr_map = ANDES_MHPM_MAP
> > +       },
> > +};
> > +
> > +int andes_pmu_setup(void)
> > +{
> > +       int i, rc;
> > +       struct fdt_pmu_hw_event_select_map *event;
> > +
> > +       /*
> > +        * At the moment, simply create mapping for any 45-series core
> > +        * based on marchid, we may check and differentiate the mapping
> > +        * by mimpid.
> > +        */
> > +       if (!is_andes(45))
> 
> nit: A macro would be nice here.
> 
> > +               return 0;
> > +
> > +       for (i = 0; i < array_size(andes45_hw_evt_counters); i++) {
> > +               rc = sbi_pmu_add_hw_event_counter_map(
> > +                       andes45_hw_evt_counters[i].eidx_start,
> > +                       andes45_hw_evt_counters[i].eidx_end,
> > +                       andes45_hw_evt_counters[i].ctr_map);
> > +               if (rc)
> > +                       return rc;
> > +       }
> > +
> > +       for (i = 0; i < array_size(andes45_hw_evt_selects); i++) {
> > +               event         = &fdt_pmu_evt_select[hw_event_count];
> > +               event->eidx   = andes45_hw_evt_selects[i].eidx;
> > +               event->select = andes45_hw_evt_selects[i].select;
> > +               hw_event_count++;
> > +       }
> > +
> > +       for (i = 0; i < array_size(andes45_raw_evt_counters); i++) {
> > +               rc = sbi_pmu_add_raw_event_counter_map(
> > +                       andes45_raw_evt_counters[i].select,
> > +                       andes45_raw_evt_counters[i].select_mask,
> > +                       andes45_raw_evt_counters[i].ctr_map);
> > +               if (rc)
> > +                       return rc;
> > +       }
> > +
> > +       return 0;
> > +}
> > diff --git a/platform/generic/andes/objects.mk b/platform/generic/andes/objects.mk
> > index 6a8c66c..57caaf6 100644
> > --- a/platform/generic/andes/objects.mk
> > +++ b/platform/generic/andes/objects.mk
> > @@ -8,3 +8,4 @@ platform-objs-$(CONFIG_PLATFORM_ANDES_AE350) += andes/ae350.o andes/sleep.o
> >  platform-objs-$(CONFIG_ANDES45_PMA) += andes/andes45-pma.o
> >  platform-objs-$(CONFIG_ANDES_SBI) += andes/andes_sbi.o
> >  platform-objs-$(CONFIG_ANDES_PMU) += andes/andes_pmu.o
> > +platform-objs-$(CONFIG_ANDES_HPM) += andes/andes_hpm.o
> > diff --git a/platform/generic/include/andes/andes_hpm.h b/platform/generic/include/andes/andes_hpm.h
> > index b4d71b9..0ae391f 100644
> > --- a/platform/generic/include/andes/andes_hpm.h
> > +++ b/platform/generic/include/andes/andes_hpm.h
> > @@ -7,6 +7,75 @@
> >  #ifndef _ANDES_HPM_H_
> >  #define _ANDES_HPM_H_
> >
> > +#define ANDES_MHPM_MAP         0x78
> > +#define ANDES_RAW_EVENT_MASK   ~0ULL
> > +
> > +/* Event selector for instruction commit events */
> > +#define ANDES_CYCLES                           0x10
> > +#define ANDES_INSTRET                          0x20
> > +#define ANDES_INT_LOAD_INST                    0x30
> > +#define ANDES_INT_STORE_INST                   0x40
> > +#define ANDES_ATOMIC_INST                      0x50
> > +#define ANDES_SYS_INST                         0x60
> > +#define ANDES_INT_COMPUTE_INST                 0x70
> > +#define ANDES_CONDITION_BR                     0x80
> > +#define ANDES_TAKEN_CONDITION_BR               0x90
> > +#define ANDES_JAL_INST                         0xA0
> > +#define ANDES_JALR_INST                                0xB0
> > +#define ANDES_RET_INST                         0xC0
> > +#define ANDES_CONTROL_TRANS_INST               0xD0
> > +#define ANDES_EX9_INST                         0xE0
> > +#define ANDES_INT_MUL_INST                     0xF0
> > +#define ANDES_INT_DIV_REMAINDER_INST           0x100
> > +#define ANDES_FLOAT_LOAD_INST                  0x110
> > +#define ANDES_FLOAT_STORE_INST                 0x120
> > +#define ANDES_FLOAT_ADD_SUB_INST               0x130
> > +#define ANDES_FLOAT_MUL_INST                   0x140
> > +#define ANDES_FLOAT_FUSED_MULADD_INST          0x150
> > +#define ANDES_FLOAT_DIV_SQUARE_ROOT_INST       0x160
> > +#define ANDES_OTHER_FLOAT_INST                 0x170
> > +#define ANDES_INT_MUL_AND_SUB_INST             0x180
> > +#define ANDES_RETIRED_OP                       0x190
> > +
> > +/* Event selector for memory system events */
> > +#define ANDES_ILM_ACCESS                       0x01
> > +#define ANDES_DLM_ACCESS                       0x11
> > +#define ANDES_ICACHE_ACCESS                    0x21
> > +#define ANDES_ICACHE_MISS                      0x31
> > +#define ANDES_DCACHE_ACCESS                    0x41
> > +#define ANDES_DCACHE_MISS                      0x51
> > +#define ANDES_DCACHE_LOAD_ACCESS               0x61
> > +#define ANDES_DCACHE_LOAD_MISS                 0x71
> > +#define ANDES_DCACHE_STORE_ACCESS              0x81
> > +#define ANDES_DCACHE_STORE_MISS                        0x91
> > +#define ANDES_DCACHE_WB                                0xA1
> > +#define ANDES_CYCLE_WAIT_ICACHE_FILL           0xB1
> > +#define ANDES_CYCLE_WAIT_DCACHE_FILL           0xC1
> > +#define ANDES_UNCACHED_IFETCH_FROM_BUS         0xD1
> > +#define ANDES_UNCACHED_LOAD_FROM_BUS           0xE1
> > +#define ANDES_CYCLE_WAIT_UNCACHED_IFETCH       0xF1
> > +#define ANDES_CYCLE_WAIT_UNCACHED_LOAD         0x101
> > +#define ANDES_MAIN_ITLB_ACCESS                 0x111
> > +#define ANDES_MAIN_ITLB_MISS                   0x121
> > +#define ANDES_MAIN_DTLB_ACCESS                 0x131
> > +#define ANDES_MAIN_DTLB_MISS                   0x141
> > +#define ANDES_CYCLE_WAIT_ITLB_FILL             0x151
> > +#define ANDES_PIPE_STALL_CYCLE_DTLB_MISS       0x161
> > +#define ANDES_HW_PREFETCH_BUS_ACCESS           0x171
> > +
> > +/* Event selector for microarchitecture events */
> > +#define ANDES_MISPREDICT_CONDITION_BR          0x02
> > +#define ANDES_MISPREDICT_TAKE_CONDITION_BR     0x12
> > +#define ANDES_MISPREDICT_TARGET_RET_INST       0x22
> > +
> > +#ifdef CONFIG_ANDES_HPM
> > +
> > +int andes_pmu_setup(void);
> > +
> > +#else
> > +
> >  static inline int andes_pmu_setup(void) { return 0; }
> >
> > +#endif /* CONFIG_ANDES_HPM */
> > +
> >  #endif /* _ANDES_HPM_H_ */
> > --
> > 2.34.1
> >
> 
> 
> -- 
> Regards,
> Atish

[PATCH v4 15/15] docs: pmu: Add Andes PMU node example

[Yu Chien Peter Lin]

Add PMU node example for event index to counter index mapping
and selector value translation of Andes' CPUs.

Currently, there are 4 HPM counters that can be used to monitor
all of the events for each hart.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
Changes v1 -> v2:
  - sync up with datasheet
Changes v2 -> v3:
  - Include Anup's RB tag
Changes v3 -> v4:
  - Include Prabhakar's RB tag
---
 docs/pmu_support.md | 82 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/docs/pmu_support.md b/docs/pmu_support.md
index 8cfa08c..9b48f1e 100644
--- a/docs/pmu_support.md
+++ b/docs/pmu_support.md
@@ -125,3 +125,85 @@ pmu {
 					  <0x0 0x2 0xffffffff 0xffffe0ff 0x18>;
 };
 ```
+
+### Example 3
+
+```
+/*
+ * For Andes 45-series platforms. The encodings can be found in the
+ * "Machine Performance Monitoring Event Selector" section
+ * http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
+ */
+pmu {
+	compatible 			= "riscv,pmu";
+	riscv,event-to-mhpmevent =
+					 <0x1 0x0000 0x10>, /* CPU_CYCLES          -> Cycle count */
+					 <0x2 0x0000 0x20>, /* INSTRUCTIONS        -> Retired instruction count */
+					 <0x3 0x0000 0x41>, /* CACHE_REFERENCES    -> D-Cache access */
+					 <0x4 0x0000 0x51>, /* CACHE_MISSES        -> D-Cache miss */
+					 <0x5 0x0000 0x80>, /* BRANCH_INSTRUCTIONS -> Conditional branch instruction count */
+					 <0x6 0x0000 0x02>, /* BRANCH_MISSES       -> Misprediction of conditional branches */
+					 <0x10000 0x0000 0x61>,  /* L1D_READ_ACCESS  -> D-Cache load access */
+					 <0x10001 0x0000 0x71>,  /* L1D_READ_MISS    -> D-Cache load miss */
+					 <0x10002 0x0000 0x81>,  /* L1D_WRITE_ACCESS -> D-Cache store access */
+					 <0x10003 0x0000 0x91>,  /* L1D_WRITE_MISS   -> D-Cache store miss */
+					 <0x10008 0x0000 0x21>,  /* L1I_READ_ACCESS  -> I-Cache access */
+					 <0x10009 0x0000 0x31>;  /* L1I_READ_MISS    -> I-Cache miss */
+	riscv,event-to-mhpmcounters = <0x1 0x6 0x78>,
+							<0x10000 0x10003 0x78>,
+							<0x10008 0x10009 0x78>;
+	riscv,raw-event-to-mhpmcounters =
+						<0x0 0x10 0xffffffff 0xffffffff 0x78>, /* Cycle count */
+						<0x0 0x20 0xffffffff 0xffffffff 0x78>, /* Retired instruction count */
+						<0x0 0x30 0xffffffff 0xffffffff 0x78>, /* Integer load instruction count */
+						<0x0 0x40 0xffffffff 0xffffffff 0x78>, /* Integer store instruction count */
+						<0x0 0x50 0xffffffff 0xffffffff 0x78>, /* Atomic instruction count */
+						<0x0 0x60 0xffffffff 0xffffffff 0x78>, /* System instruction count */
+						<0x0 0x70 0xffffffff 0xffffffff 0x78>, /* Integer computational instruction count */
+						<0x0 0x80 0xffffffff 0xffffffff 0x78>, /* Conditional branch instruction count */
+						<0x0 0x90 0xffffffff 0xffffffff 0x78>, /* Taken conditional branch instruction count */
+						<0x0 0xA0 0xffffffff 0xffffffff 0x78>, /* JAL instruction count */
+						<0x0 0xB0 0xffffffff 0xffffffff 0x78>, /* JALR instruction count */
+						<0x0 0xC0 0xffffffff 0xffffffff 0x78>, /* Return instruction count */
+						<0x0 0xD0 0xffffffff 0xffffffff 0x78>, /* Control transfer instruction count */
+						<0x0 0xE0 0xffffffff 0xffffffff 0x78>, /* EXEC.IT instruction count */
+						<0x0 0xF0 0xffffffff 0xffffffff 0x78>, /* Integer multiplication instruction count */
+						<0x0 0x100 0xffffffff 0xffffffff 0x78>, /* Integer division instruction count */
+						<0x0 0x110 0xffffffff 0xffffffff 0x78>, /* Floating-point load instruction count */
+						<0x0 0x120 0xffffffff 0xffffffff 0x78>, /* Floating-point store instruction count */
+						<0x0 0x130 0xffffffff 0xffffffff 0x78>, /* Floating-point addition/subtraction instruction count */
+						<0x0 0x140 0xffffffff 0xffffffff 0x78>, /* Floating-point multiplication instruction count */
+						<0x0 0x150 0xffffffff 0xffffffff 0x78>, /* Floating-point fused multiply-add instruction count */
+						<0x0 0x160 0xffffffff 0xffffffff 0x78>, /* Floating-point division or square-root instruction count */
+						<0x0 0x170 0xffffffff 0xffffffff 0x78>, /* Other floating-point instruction count */
+						<0x0 0x180 0xffffffff 0xffffffff 0x78>, /* Integer multiplication and add/sub instruction count */
+						<0x0 0x190 0xffffffff 0xffffffff 0x78>, /* Retired operation count */
+						<0x0 0x01 0xffffffff 0xffffffff 0x78>, /* ILM access */
+						<0x0 0x11 0xffffffff 0xffffffff 0x78>, /* DLM access */
+						<0x0 0x21 0xffffffff 0xffffffff 0x78>, /* I-Cache access */
+						<0x0 0x31 0xffffffff 0xffffffff 0x78>, /* I-Cache miss */
+						<0x0 0x41 0xffffffff 0xffffffff 0x78>, /* D-Cache access */
+						<0x0 0x51 0xffffffff 0xffffffff 0x78>, /* D-Cache miss */
+						<0x0 0x61 0xffffffff 0xffffffff 0x78>, /* D-Cache load access */
+						<0x0 0x71 0xffffffff 0xffffffff 0x78>, /* D-Cache load miss */
+						<0x0 0x81 0xffffffff 0xffffffff 0x78>, /* D-Cache store access */
+						<0x0 0x91 0xffffffff 0xffffffff 0x78>, /* D-Cache store miss */
+						<0x0 0xA1 0xffffffff 0xffffffff 0x78>, /* D-Cache writeback */
+						<0x0 0xB1 0xffffffff 0xffffffff 0x78>, /* Cycles waiting for I-Cache fill data */
+						<0x0 0xC1 0xffffffff 0xffffffff 0x78>, /* Cycles waiting for D-Cache fill data */
+						<0x0 0xD1 0xffffffff 0xffffffff 0x78>, /* Uncached fetch data access from bus */
+						<0x0 0xE1 0xffffffff 0xffffffff 0x78>, /* Uncached load data access from bus */
+						<0x0 0xF1 0xffffffff 0xffffffff 0x78>, /* Cycles waiting for uncached fetch data from bus */
+						<0x0 0x101 0xffffffff 0xffffffff 0x78>, /* Cycles waiting for uncached load data from bus */
+						<0x0 0x111 0xffffffff 0xffffffff 0x78>, /* Main ITLB access */
+						<0x0 0x121 0xffffffff 0xffffffff 0x78>, /* Main ITLB miss */
+						<0x0 0x131 0xffffffff 0xffffffff 0x78>, /* Main DTLB access */
+						<0x0 0x141 0xffffffff 0xffffffff 0x78>, /* Main DTLB miss */
+						<0x0 0x151 0xffffffff 0xffffffff 0x78>, /* Cycles waiting for Main ITLB fill data */
+						<0x0 0x161 0xffffffff 0xffffffff 0x78>, /* Pipeline stall cycles caused by Main DTLB miss */
+						<0x0 0x171 0xffffffff 0xffffffff 0x78>, /* Hardware prefetch bus access */
+						<0x0 0x02 0xffffffff 0xffffffff 0x78>, /* Misprediction of conditional branches */
+						<0x0 0x12 0xffffffff 0xffffffff 0x78>, /* Misprediction of taken conditional branches */
+						<0x0 0x22 0xffffffff 0xffffffff 0x78>; /* Misprediction of targets of Return instructions */
+};
+```
-- 
2.34.1

[PATCH v4 00/15] Add Andes PMU extension support

[Anup Patel]

On Thu, Nov 30, 2023 at 6:12?PM Yu Chien Peter Lin
<peterlin@andestech.com> wrote:
>
> This patch series enables perf tool to utilize Andes PMU
> extension via PMU SBI calls, provides PMU device callbacks
> to achieve event sampling and mode filtering.
>
> The last patch provides a PMU node example used on AX45MP cores.
>
> The OpenSBI and Linux patches can be found on Andes Technology GitHub
> - https://github.com/andestech/opensbi/commits/andes-pmu-support-v4
> - https://github.com/andestech/linux/commits/andes-pmu-support-v4
>
> For more details about Andes PMU extension, see Counter Related
> Registers in the AX45MP datasheet:
> http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
>
> Leo Yu-Chi Liang (1):
>   lib: ipi: Adjust Andes PLICSW to single-bit-per-hart scheme
>
> Yu Chien Peter Lin (14):
>   sbi: sbi_pmu: Improve sbi_pmu_init() error handling
>   lib: sbi: Add XAndesPMU in hart extensions
>   sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device
>   platform: include: andes45: Add PMU related CSR defines
>   platform: generic: Introduce pmu_init() platform override
>   platform: andes: Add Andes custom PMU support
>   platform: andes: Enable Andes PMU for AE350
>   platform: rzfive: Enable Andes PMU for RZ/Five
>   lib: utils: fdt_fixup: Allow preserving PMU properties
>   platform: andes: Factor out is_andes() helper
>   lib: utils: fdt_pmu: Make the fdt_pmu_evt_select table global variable
>   lib: utils: fdt_pmu: Do not iterate over the fdt_pmu_evt_select table
>   platform: andes: Add Andes default PMU mapping support
>   docs: pmu: Add Andes PMU node example

Applied all patches to the riscv/opensbi repo except PATCH14 which
has pending comment from Atish.

Thanks,
Anup

>
>  docs/pmu_support.md                          |  82 ++++
>  include/sbi/sbi_ecall_interface.h            |   5 +
>  include/sbi/sbi_hart.h                       |   2 +
>  include/sbi/sbi_pmu.h                        |   6 +
>  include/sbi_utils/fdt/fdt_helper.h           |  17 +
>  include/sbi_utils/fdt/fdt_pmu.h              |   6 +
>  include/sbi_utils/ipi/andes_plicsw.h         |  23 +-
>  lib/sbi/sbi_hart.c                           |   3 +
>  lib/sbi/sbi_pmu.c                            |  26 +-
>  lib/utils/fdt/Kconfig                        |   7 +
>  lib/utils/fdt/fdt_fixup.c                    |   3 +
>  lib/utils/fdt/fdt_pmu.c                      |  17 +-
>  lib/utils/ipi/andes_plicsw.c                 | 104 ++---
>  platform/generic/Kconfig                     |   4 +
>  platform/generic/andes/Kconfig               |  15 +
>  platform/generic/andes/ae350.c               |  19 +-
>  platform/generic/andes/andes_hpm.c           | 405 +++++++++++++++++++
>  platform/generic/andes/andes_pmu.c           | 105 +++++
>  platform/generic/andes/objects.mk            |   2 +
>  platform/generic/include/andes/andes45.h     |  32 ++
>  platform/generic/include/andes/andes_hpm.h   |  81 ++++
>  platform/generic/include/andes/andes_pmu.h   |  34 ++
>  platform/generic/include/platform_override.h |   1 +
>  platform/generic/platform.c                  |  14 +-
>  platform/generic/renesas/rzfive/rzfive.c     |   5 +-
>  25 files changed, 908 insertions(+), 110 deletions(-)
>  create mode 100644 platform/generic/andes/andes_hpm.c
>  create mode 100644 platform/generic/andes/andes_pmu.c
>  create mode 100644 platform/generic/include/andes/andes_hpm.h
>  create mode 100644 platform/generic/include/andes/andes_pmu.h
>
> --
> 2.34.1
>

[PATCH v4 00/15] Add Andes PMU extension support

[Anup Patel]

Hi,

On Wed, Dec 6, 2023 at 7:54?PM Anup Patel <anup@brainfault.org> wrote:
>
> On Thu, Nov 30, 2023 at 6:12?PM Yu Chien Peter Lin
> <peterlin@andestech.com> wrote:
> >
> > This patch series enables perf tool to utilize Andes PMU
> > extension via PMU SBI calls, provides PMU device callbacks
> > to achieve event sampling and mode filtering.
> >
> > The last patch provides a PMU node example used on AX45MP cores.
> >
> > The OpenSBI and Linux patches can be found on Andes Technology GitHub
> > - https://github.com/andestech/opensbi/commits/andes-pmu-support-v4
> > - https://github.com/andestech/linux/commits/andes-pmu-support-v4
> >
> > For more details about Andes PMU extension, see Counter Related
> > Registers in the AX45MP datasheet:
> > http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
> >
> > Leo Yu-Chi Liang (1):
> >   lib: ipi: Adjust Andes PLICSW to single-bit-per-hart scheme
> >
> > Yu Chien Peter Lin (14):
> >   sbi: sbi_pmu: Improve sbi_pmu_init() error handling
> >   lib: sbi: Add XAndesPMU in hart extensions
> >   sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device
> >   platform: include: andes45: Add PMU related CSR defines
> >   platform: generic: Introduce pmu_init() platform override
> >   platform: andes: Add Andes custom PMU support
> >   platform: andes: Enable Andes PMU for AE350
> >   platform: rzfive: Enable Andes PMU for RZ/Five
> >   lib: utils: fdt_fixup: Allow preserving PMU properties
> >   platform: andes: Factor out is_andes() helper
> >   lib: utils: fdt_pmu: Make the fdt_pmu_evt_select table global variable
> >   lib: utils: fdt_pmu: Do not iterate over the fdt_pmu_evt_select table
> >   platform: andes: Add Andes default PMU mapping support
> >   docs: pmu: Add Andes PMU node example
>
> Applied all patches to the riscv/opensbi repo except PATCH14 which
> has pending comment from Atish.

Can you address comments on PATCH14 and send it this week ?

Next week, we will be releasing OpenSBI v1.4

Regards,
Anup

>
> Thanks,
> Anup
>
> >
> >  docs/pmu_support.md                          |  82 ++++
> >  include/sbi/sbi_ecall_interface.h            |   5 +
> >  include/sbi/sbi_hart.h                       |   2 +
> >  include/sbi/sbi_pmu.h                        |   6 +
> >  include/sbi_utils/fdt/fdt_helper.h           |  17 +
> >  include/sbi_utils/fdt/fdt_pmu.h              |   6 +
> >  include/sbi_utils/ipi/andes_plicsw.h         |  23 +-
> >  lib/sbi/sbi_hart.c                           |   3 +
> >  lib/sbi/sbi_pmu.c                            |  26 +-
> >  lib/utils/fdt/Kconfig                        |   7 +
> >  lib/utils/fdt/fdt_fixup.c                    |   3 +
> >  lib/utils/fdt/fdt_pmu.c                      |  17 +-
> >  lib/utils/ipi/andes_plicsw.c                 | 104 ++---
> >  platform/generic/Kconfig                     |   4 +
> >  platform/generic/andes/Kconfig               |  15 +
> >  platform/generic/andes/ae350.c               |  19 +-
> >  platform/generic/andes/andes_hpm.c           | 405 +++++++++++++++++++
> >  platform/generic/andes/andes_pmu.c           | 105 +++++
> >  platform/generic/andes/objects.mk            |   2 +
> >  platform/generic/include/andes/andes45.h     |  32 ++
> >  platform/generic/include/andes/andes_hpm.h   |  81 ++++
> >  platform/generic/include/andes/andes_pmu.h   |  34 ++
> >  platform/generic/include/platform_override.h |   1 +
> >  platform/generic/platform.c                  |  14 +-
> >  platform/generic/renesas/rzfive/rzfive.c     |   5 +-
> >  25 files changed, 908 insertions(+), 110 deletions(-)
> >  create mode 100644 platform/generic/andes/andes_hpm.c
> >  create mode 100644 platform/generic/andes/andes_pmu.c
> >  create mode 100644 platform/generic/include/andes/andes_hpm.h
> >  create mode 100644 platform/generic/include/andes/andes_pmu.h
> >
> > --
> > 2.34.1
> >
>
> --
> opensbi mailing list
> opensbi at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/opensbi

[PATCH v4 00/15] Add Andes PMU extension support

[Yu-Chien Peter Lin]

Hi Anup,

On Mon, Dec 18, 2023 at 11:15:48AM +0530, Anup Patel wrote:
> Hi,
> 
> On Wed, Dec 6, 2023 at 7:54?PM Anup Patel <anup@brainfault.org> wrote:
> >
> > On Thu, Nov 30, 2023 at 6:12?PM Yu Chien Peter Lin
> > <peterlin@andestech.com> wrote:
> > >
> > > This patch series enables perf tool to utilize Andes PMU
> > > extension via PMU SBI calls, provides PMU device callbacks
> > > to achieve event sampling and mode filtering.
> > >
> > > The last patch provides a PMU node example used on AX45MP cores.
> > >
> > > The OpenSBI and Linux patches can be found on Andes Technology GitHub
> > > - https://github.com/andestech/opensbi/commits/andes-pmu-support-v4
> > > - https://github.com/andestech/linux/commits/andes-pmu-support-v4
> > >
> > > For more details about Andes PMU extension, see Counter Related
> > > Registers in the AX45MP datasheet:
> > > http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
> > >
> > > Leo Yu-Chi Liang (1):
> > >   lib: ipi: Adjust Andes PLICSW to single-bit-per-hart scheme
> > >
> > > Yu Chien Peter Lin (14):
> > >   sbi: sbi_pmu: Improve sbi_pmu_init() error handling
> > >   lib: sbi: Add XAndesPMU in hart extensions
> > >   sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device
> > >   platform: include: andes45: Add PMU related CSR defines
> > >   platform: generic: Introduce pmu_init() platform override
> > >   platform: andes: Add Andes custom PMU support
> > >   platform: andes: Enable Andes PMU for AE350
> > >   platform: rzfive: Enable Andes PMU for RZ/Five
> > >   lib: utils: fdt_fixup: Allow preserving PMU properties
> > >   platform: andes: Factor out is_andes() helper
> > >   lib: utils: fdt_pmu: Make the fdt_pmu_evt_select table global variable
> > >   lib: utils: fdt_pmu: Do not iterate over the fdt_pmu_evt_select table
> > >   platform: andes: Add Andes default PMU mapping support
> > >   docs: pmu: Add Andes PMU node example
> >
> > Applied all patches to the riscv/opensbi repo except PATCH14 which
> > has pending comment from Atish.
> 
> Can you address comments on PATCH14 and send it this week ?
> 
> Next week, we will be releasing OpenSBI v1.4

Sure, thanks for taking care of this series.

Best regards,
Peter Lin

> 
> Regards,
> Anup
> 
> >
> > Thanks,
> > Anup
> >
> > >
> > >  docs/pmu_support.md                          |  82 ++++
> > >  include/sbi/sbi_ecall_interface.h            |   5 +
> > >  include/sbi/sbi_hart.h                       |   2 +
> > >  include/sbi/sbi_pmu.h                        |   6 +
> > >  include/sbi_utils/fdt/fdt_helper.h           |  17 +
> > >  include/sbi_utils/fdt/fdt_pmu.h              |   6 +
> > >  include/sbi_utils/ipi/andes_plicsw.h         |  23 +-
> > >  lib/sbi/sbi_hart.c                           |   3 +
> > >  lib/sbi/sbi_pmu.c                            |  26 +-
> > >  lib/utils/fdt/Kconfig                        |   7 +
> > >  lib/utils/fdt/fdt_fixup.c                    |   3 +
> > >  lib/utils/fdt/fdt_pmu.c                      |  17 +-
> > >  lib/utils/ipi/andes_plicsw.c                 | 104 ++---
> > >  platform/generic/Kconfig                     |   4 +
> > >  platform/generic/andes/Kconfig               |  15 +
> > >  platform/generic/andes/ae350.c               |  19 +-
> > >  platform/generic/andes/andes_hpm.c           | 405 +++++++++++++++++++
> > >  platform/generic/andes/andes_pmu.c           | 105 +++++
> > >  platform/generic/andes/objects.mk            |   2 +
> > >  platform/generic/include/andes/andes45.h     |  32 ++
> > >  platform/generic/include/andes/andes_hpm.h   |  81 ++++
> > >  platform/generic/include/andes/andes_pmu.h   |  34 ++
> > >  platform/generic/include/platform_override.h |   1 +
> > >  platform/generic/platform.c                  |  14 +-
> > >  platform/generic/renesas/rzfive/rzfive.c     |   5 +-
> > >  25 files changed, 908 insertions(+), 110 deletions(-)
> > >  create mode 100644 platform/generic/andes/andes_hpm.c
> > >  create mode 100644 platform/generic/andes/andes_pmu.c
> > >  create mode 100644 platform/generic/include/andes/andes_hpm.h
> > >  create mode 100644 platform/generic/include/andes/andes_pmu.h
> > >
> > > --
> > > 2.34.1
> > >
> >
> > --
> > opensbi mailing list
> > opensbi at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/opensbi