[PATCH 0/2] x86: aid debug info generation in assembly files

[PATCH 0/2] x86: aid debug info generation in assembly files

[Jan Beulich]

While not immediately useful - a new binutils release would first need
cutting - I thought I'd post early the patches utilizing new functionality
there. The changes made are largely benign with gas 2.38 or older.

1: improve .debug_line contents for assembly sources
2: annotate entry points with type and size

Jan

[PATCH 1/2] x86: improve .debug_line contents for assembly sources

[Jan Beulich]

While future gas versions will allow line number information to be
generated for all instances of .irp and alike [1][2], the same isn't
true (nor immediately intended) for .macro [3]. Hence macros, when they
do more than just invoke another macro or issue an individual insn, want
to have .line directives (in header files also .file ones) in place.

Signed-off-by: Jan Beulich <jbeulich@suse.com>

[1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=7992631e8c0b0e711fbaba991348ef6f6e583725
[2] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=2ee1792bec225ea19c71095cee5a3a9ae6df7c59
[3] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=6d1ace6861e999361b30d1bc27459ab8094e0d4a
---
Using .file has the perhaps undesirable side effect of generating a fair
amount of (all identical) STT_FILE entries in the symbol table. We also
can't use the supposedly assembler-internal (and hence undocumented)
.appfile anymore, as it was removed [4]. Note that .linefile (also
internal/undocumented) as well as the "# <line> <file>" constructs the
compiler emits, leading to .linefile insertion by the assembler, aren't
of use anyway as these are processed and purged when processing .macro
[3].

[4] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=c39e89c3aaa3a6790f85e80f2da5022bc4bce38b

--- a/xen/arch/x86/include/asm/spec_ctrl_asm.h
+++ b/xen/arch/x86/include/asm/spec_ctrl_asm.h
@@ -24,6 +24,8 @@
 #include <asm/msr-index.h>
 #include <asm/spec_ctrl.h>
 
+#define FILE_AND_LINE .file __FILE__; .line __LINE__
+
 /*
  * Saving and restoring MSR_SPEC_CTRL state is a little tricky.
  *
@@ -89,6 +91,7 @@
  */
 
 .macro DO_OVERWRITE_RSB tmp=rax
+    FILE_AND_LINE
 /*
  * Requires nothing
  * Clobbers \tmp (%rax by default), %rcx
@@ -137,6 +140,7 @@
 .endm
 
 .macro DO_SPEC_CTRL_ENTRY maybexen:req
+    FILE_AND_LINE
 /*
  * Requires %rsp=regs (also cpuinfo if !maybexen)
  * Requires %r14=stack_end (if maybexen)
@@ -171,6 +175,7 @@
 .endm
 
 .macro DO_SPEC_CTRL_EXIT_TO_XEN
+    FILE_AND_LINE
 /*
  * Requires %rbx=stack_end
  * Clobbers %rax, %rcx, %rdx
@@ -192,6 +197,7 @@
 .endm
 
 .macro DO_SPEC_CTRL_EXIT_TO_GUEST
+    FILE_AND_LINE
 /*
  * Requires %eax=spec_ctrl, %rsp=regs/cpuinfo
  * Clobbers %rcx, %rdx
@@ -241,6 +247,7 @@
  * been reloaded.
  */
 .macro SPEC_CTRL_ENTRY_FROM_INTR_IST
+    FILE_AND_LINE
 /*
  * Requires %rsp=regs, %r14=stack_end
  * Clobbers %rax, %rcx, %rdx
@@ -288,6 +295,7 @@ UNLIKELY_DISPATCH_LABEL(\@_serialise):
 
 /* Use when exiting to Xen in IST context. */
 .macro SPEC_CTRL_EXIT_TO_XEN_IST
+    FILE_AND_LINE
 /*
  * Requires %rbx=stack_end
  * Clobbers %rax, %rcx, %rdx
--- a/xen/arch/x86/indirect-thunk.S
+++ b/xen/arch/x86/indirect-thunk.S
@@ -12,6 +12,7 @@
 #include <asm/asm_defns.h>
 
 .macro IND_THUNK_RETPOLINE reg:req
+        .line __LINE__
         call 2f
 1:
         lfence

[PATCH 2/2] x86: annotate entry points with type and size

[Jan Beulich]

Future gas versions will generate minimalistic Dwarf debug info for
items annotated as functions and having their sizes specified [1].
"Borrow" Arm's END() and ENDPROC() to avoid open-coding (and perhaps
typo-ing) the respective directives.

Signed-off-by: Jan Beulich <jbeulich@suse.com>

[1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28

--- a/xen/arch/x86/include/asm/config.h
+++ b/xen/arch/x86/include/asm/config.h
@@ -53,6 +53,11 @@
 #define GLOBAL(name)                            \
   .globl name;                                  \
   name:
+#define END(name)                               \
+  .size name, . - name
+#define ENDPROC(name)                           \
+  .type name, @function;                        \
+  END(name)
 #endif
 
 #define NR_hypercalls 64
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -27,6 +27,7 @@ ENTRY(entry_int82)
 
         mov   %rsp, %rdi
         call  do_entry_int82
+ENDPROC(entry_int82)
 
 /* %rbx: struct vcpu */
 ENTRY(compat_test_all_events)
@@ -116,6 +117,7 @@ compat_process_trap:
         leaq  VCPU_trap_bounce(%rbx),%rdx
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+ENDPROC(compat_test_all_events)
 
 /* %rbx: struct vcpu, interrupts disabled */
 ENTRY(compat_restore_all_guest)
@@ -161,6 +163,7 @@ ENTRY(compat_restore_all_guest)
         RESTORE_ALL adj=8 compat=1
 .Lft0:  iretq
         _ASM_PRE_EXTABLE(.Lft0, handle_exception)
+ENDPROC(compat_restore_all_guest)
 
 /* This mustn't modify registers other than %rax. */
 ENTRY(cr4_pv32_restore)
@@ -193,6 +196,7 @@ ENTRY(cr4_pv32_restore)
         pop   %rdx
         xor   %eax, %eax
         ret
+ENDPROC(cr4_pv32_restore)
 
 ENTRY(compat_syscall)
         /* Fix up reported %cs/%ss for compat domains. */
@@ -222,6 +226,7 @@ UNLIKELY_END(compat_syscall_gpf)
         movw  %si,TRAPBOUNCE_cs(%rdx)
         movb  %cl,TRAPBOUNCE_flags(%rdx)
         jmp   .Lcompat_bounce_exception
+ENDPROC(compat_syscall)
 
 ENTRY(compat_sysenter)
         CR4_PV32_RESTORE
@@ -236,11 +241,13 @@ ENTRY(compat_sysenter)
         movw  %ax,TRAPBOUNCE_cs(%rdx)
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+ENDPROC(compat_sysenter)
 
 ENTRY(compat_int80_direct_trap)
         CR4_PV32_RESTORE
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+ENDPROC(compat_int80_direct_trap)
 
 /* CREATE A BASIC EXCEPTION FRAME ON GUEST OS (RING-1) STACK:            */
 /*   {[ERRCODE,] EIP, CS, EFLAGS, [ESP, SS]}                             */
@@ -352,3 +359,4 @@ compat_crash_page_fault:
         jmp   .Lft14
 .previous
         _ASM_EXTABLE(.Lft14, .Lfx14)
+ENDPROC(compat_create_bounce_frame)
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -139,6 +139,7 @@ process_trap:
         leaq VCPU_trap_bounce(%rbx), %rdx
         call create_bounce_frame
         jmp  test_all_events
+ENDPROC(switch_to_kernel)
 
         .section .text.entry, "ax", @progbits
 
@@ -230,6 +231,7 @@ iret_exit_to_guest:
         addq  $8,%rsp
 .Lft0:  iretq
         _ASM_PRE_EXTABLE(.Lft0, handle_exception)
+ENDPROC(restore_all_guest)
 
 /*
  * When entering SYSCALL from kernel mode:
@@ -281,6 +283,7 @@ ENTRY(lstar_enter)
         mov   %rsp, %rdi
         call  pv_hypercall
         jmp   test_all_events
+ENDPROC(lstar_enter)
 
 /* See lstar_enter for entry register state. */
 ENTRY(cstar_enter)
@@ -320,6 +323,7 @@ ENTRY(cstar_enter)
         jne   compat_syscall
 #endif
         jmp   switch_to_kernel
+ENDPROC(cstar_enter)
 
 ENTRY(sysenter_entry)
         ENDBR64
@@ -384,6 +388,7 @@ UNLIKELY_END(sysenter_gpf)
         jne   compat_sysenter
 #endif
         jmp   .Lbounce_exception
+ENDPROC(sysenter_entry)
 
 ENTRY(int80_direct_trap)
         ENDBR64
@@ -473,6 +478,7 @@ int80_slow_path:
          */
         GET_STACK_END(14)
         jmp   handle_exception_saved
+ENDPROC(int80_direct_trap)
 
         /* create_bounce_frame & helpers don't need to be in .text.entry */
         .text
@@ -617,6 +623,7 @@ ENTRY(dom_crash_sync_extable)
         xorl  %edi,%edi
         jmp   asm_domain_crash_synchronous /* Does not return */
         .popsection
+ENDPROC(create_bounce_frame)
 #endif /* CONFIG_PV */
 
 /* --- CODE BELOW THIS LINE (MOSTLY) NOT GUEST RELATED --- */
@@ -640,10 +647,12 @@ ret_from_intr:
 #else
         jmp   test_all_events
 #endif
+ENDPROC(continue_pv_domain)
 #else
 ret_from_intr:
         ASSERT_CONTEXT_IS_XEN
         jmp   restore_all_xen
+ENDPROC(ret_from_intr)
 #endif
 
         .section .text.entry, "ax", @progbits
@@ -667,6 +676,7 @@ UNLIKELY_END(exit_cr3)
 
         RESTORE_ALL adj=8
         iretq
+ENDPROC(restore_all_xen)
 
 ENTRY(common_interrupt)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
@@ -697,10 +707,12 @@ ENTRY(common_interrupt)
         mov   %r15, STACK_CPUINFO_FIELD(xen_cr3)(%r14)
         mov   %bl, STACK_CPUINFO_FIELD(use_pv_cr3)(%r14)
         jmp ret_from_intr
+ENDPROC(common_interrupt)
 
 ENTRY(page_fault)
         ENDBR64
         movl  $TRAP_page_fault,4(%rsp)
+ENDPROC(page_fault)
 /* No special register assumptions. */
 GLOBAL(handle_exception)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
@@ -872,12 +884,14 @@ FATAL_exception_with_ints_disabled:
         movq  %rsp,%rdi
         call  fatal_trap
         BUG   /* fatal_trap() shouldn't return. */
+ENDPROC(handle_exception)
 
 ENTRY(divide_error)
         ENDBR64
         pushq $0
         movl  $TRAP_divide_error,4(%rsp)
         jmp   handle_exception
+ENDPROC(divide_error)
 
 ENTRY(coprocessor_error)
         ENDBR64
@@ -890,72 +904,85 @@ ENTRY(simd_coprocessor_error)
         pushq $0
         movl  $TRAP_simd_error,4(%rsp)
         jmp   handle_exception
+ENDPROC(coprocessor_error)
 
 ENTRY(device_not_available)
         ENDBR64
         pushq $0
         movl  $TRAP_no_device,4(%rsp)
         jmp   handle_exception
+ENDPROC(device_not_available)
 
 ENTRY(debug)
         ENDBR64
         pushq $0
         movl  $TRAP_debug,4(%rsp)
         jmp   handle_ist_exception
+ENDPROC(debug)
 
 ENTRY(int3)
         ENDBR64
         pushq $0
         movl  $TRAP_int3,4(%rsp)
         jmp   handle_exception
+ENDPROC(int3)
 
 ENTRY(overflow)
         ENDBR64
         pushq $0
         movl  $TRAP_overflow,4(%rsp)
         jmp   handle_exception
+ENDPROC(overflow)
 
 ENTRY(bounds)
         ENDBR64
         pushq $0
         movl  $TRAP_bounds,4(%rsp)
         jmp   handle_exception
+ENDPROC(bounds)
 
 ENTRY(invalid_op)
         ENDBR64
         pushq $0
         movl  $TRAP_invalid_op,4(%rsp)
         jmp   handle_exception
+ENDPROC(invalid_op)
 
 ENTRY(invalid_TSS)
         ENDBR64
         movl  $TRAP_invalid_tss,4(%rsp)
         jmp   handle_exception
+ENDPROC(invalid_TSS)
 
 ENTRY(segment_not_present)
         ENDBR64
         movl  $TRAP_no_segment,4(%rsp)
         jmp   handle_exception
+ENDPROC(segment_not_present)
 
 ENTRY(stack_segment)
         ENDBR64
         movl  $TRAP_stack_error,4(%rsp)
         jmp   handle_exception
+ENDPROC(stack_segment)
 
 ENTRY(general_protection)
         ENDBR64
         movl  $TRAP_gp_fault,4(%rsp)
         jmp   handle_exception
+ENDPROC(general_protection)
 
 ENTRY(alignment_check)
         ENDBR64
         movl  $TRAP_alignment_check,4(%rsp)
         jmp   handle_exception
+ENDPROC(alignment_check)
 
 ENTRY(entry_CP)
         ENDBR64
         movl  $X86_EXC_CP, 4(%rsp)
         jmp   handle_exception
+ENDPROC(entry_CP)
 
 ENTRY(double_fault)
         ENDBR64
@@ -981,6 +1008,7 @@ ENTRY(double_fault)
         movq  %rsp,%rdi
         call  do_double_fault
         BUG   /* do_double_fault() shouldn't return. */
+ENDPROC(double_fault)
 
         .pushsection .init.text, "ax", @progbits
 ENTRY(early_page_fault)
@@ -990,6 +1018,7 @@ ENTRY(early_page_fault)
         movq  %rsp,%rdi
         call  do_early_page_fault
         jmp   restore_all_xen
+ENDPROC(early_page_fault)
         .popsection
 
 ENTRY(nmi)
@@ -1120,17 +1149,20 @@ handle_ist_exception:
         ASSERT_CONTEXT_IS_XEN
         jmp   restore_all_xen
 #endif
+ENDPROC(nmi)
 
 ENTRY(machine_check)
         ENDBR64
         pushq $0
         movl  $TRAP_machine_check,4(%rsp)
         jmp   handle_ist_exception
+ENDPROC(machine_check)
 
 /* No op trap handler.  Required for kexec crash path. */
 GLOBAL(trap_nop)
         ENDBR64
         iretq
+ENDPROC(trap_nop)
 
 /* Table of automatically generated entry points.  One per vector. */
         .pushsection .init.rodata, "a", @progbits
@@ -1187,6 +1219,7 @@ autogen_stubs: /* Automatically generate
 
         vec = vec + 1
         .endr
+ENDPROC(autogen_stubs)
 
         .section .init.rodata, "a", @progbits
-        .size autogen_entrypoints, . - autogen_entrypoints
+        END(autogen_entrypoints)

Re: [PATCH 1/2] x86: improve .debug_line contents for assembly sources

[Roger Pau Monné]

On Tue, Apr 12, 2022 at 12:27:34PM +0200, Jan Beulich wrote:
> While future gas versions will allow line number information to be
> generated for all instances of .irp and alike [1][2], the same isn't
> true (nor immediately intended) for .macro [3]. Hence macros, when they
> do more than just invoke another macro or issue an individual insn, want
> to have .line directives (in header files also .file ones) in place.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> 
> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=7992631e8c0b0e711fbaba991348ef6f6e583725
> [2] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=2ee1792bec225ea19c71095cee5a3a9ae6df7c59
> [3] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=6d1ace6861e999361b30d1bc27459ab8094e0d4a
> ---
> Using .file has the perhaps undesirable side effect of generating a fair
> amount of (all identical) STT_FILE entries in the symbol table. We also
> can't use the supposedly assembler-internal (and hence undocumented)
> .appfile anymore, as it was removed [4]. Note that .linefile (also
> internal/undocumented) as well as the "# <line> <file>" constructs the
> compiler emits, leading to .linefile insertion by the assembler, aren't
> of use anyway as these are processed and purged when processing .macro
> [3].
> 
> [4] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=c39e89c3aaa3a6790f85e80f2da5022bc4bce38b
> 
> --- a/xen/arch/x86/include/asm/spec_ctrl_asm.h
> +++ b/xen/arch/x86/include/asm/spec_ctrl_asm.h
> @@ -24,6 +24,8 @@
>  #include <asm/msr-index.h>
>  #include <asm/spec_ctrl.h>
>  
> +#define FILE_AND_LINE .file __FILE__; .line __LINE__

Seeing as this seems to get added to all macros below, I guess you did
consider (and discarded) introducing a preprocessor macro do to the
asm macro definitons:

#define DECLARE_MACRO(n, ...) \
.macro n __VA_ARGS__ \
    .file __FILE__; .line __LINE__

Thanks, Roger.

Re: [PATCH 2/2] x86: annotate entry points with type and size

[Andrew Cooper]

On 12/04/2022 11:28, Jan Beulich wrote:
> Future gas versions will generate minimalistic Dwarf debug info for
> items annotated as functions and having their sizes specified [1].
> "Borrow" Arm's END() and ENDPROC() to avoid open-coding (and perhaps
> typo-ing) the respective directives.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>
> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28

I'm conflicted by this change.

You've clearly changed your mind since you rejected my patch introducing
this infrastructure and starting to use it.

Given that it is a reoccurring bug with livepatching which has been in
need of fixing since 2018, I'd organised some work to port Linux's
linkage.h as something more likely to have been acceptable.

~Andrew

Re: [PATCH 1/2] x86: improve .debug_line contents for assembly sources

[Jan Beulich]

On 14.04.2022 14:40, Roger Pau Monné wrote:
> On Tue, Apr 12, 2022 at 12:27:34PM +0200, Jan Beulich wrote:
>> While future gas versions will allow line number information to be
>> generated for all instances of .irp and alike [1][2], the same isn't
>> true (nor immediately intended) for .macro [3]. Hence macros, when they
>> do more than just invoke another macro or issue an individual insn, want
>> to have .line directives (in header files also .file ones) in place.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>
>> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=7992631e8c0b0e711fbaba991348ef6f6e583725
>> [2] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=2ee1792bec225ea19c71095cee5a3a9ae6df7c59
>> [3] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=6d1ace6861e999361b30d1bc27459ab8094e0d4a
>> ---
>> Using .file has the perhaps undesirable side effect of generating a fair
>> amount of (all identical) STT_FILE entries in the symbol table. We also
>> can't use the supposedly assembler-internal (and hence undocumented)
>> .appfile anymore, as it was removed [4]. Note that .linefile (also
>> internal/undocumented) as well as the "# <line> <file>" constructs the
>> compiler emits, leading to .linefile insertion by the assembler, aren't
>> of use anyway as these are processed and purged when processing .macro
>> [3].
>>
>> [4] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=c39e89c3aaa3a6790f85e80f2da5022bc4bce38b
>>
>> --- a/xen/arch/x86/include/asm/spec_ctrl_asm.h
>> +++ b/xen/arch/x86/include/asm/spec_ctrl_asm.h
>> @@ -24,6 +24,8 @@
>>  #include <asm/msr-index.h>
>>  #include <asm/spec_ctrl.h>
>>  
>> +#define FILE_AND_LINE .file __FILE__; .line __LINE__
> 
> Seeing as this seems to get added to all macros below, I guess you did
> consider (and discarded) introducing a preprocessor macro do to the
> asm macro definitons:
> 
> #define DECLARE_MACRO(n, ...) \
> .macro n __VA_ARGS__ \
>     .file __FILE__; .line __LINE__

No, I didn't even consider that. I view such as too obfuscating - there's
then e.g. no visual match with the .endm. Furthermore, as outlined in the
description, I don't think this wants applying uniformly. There are
macros which better don't have this added. Yet I also would prefer to not
end up with a mix of .macro and DECLARE_MACRO().

Jan

Re: [PATCH 2/2] x86: annotate entry points with type and size

[Jan Beulich]

On 14.04.2022 14:49, Andrew Cooper wrote:
> On 12/04/2022 11:28, Jan Beulich wrote:
>> Future gas versions will generate minimalistic Dwarf debug info for
>> items annotated as functions and having their sizes specified [1].
>> "Borrow" Arm's END() and ENDPROC() to avoid open-coding (and perhaps
>> typo-ing) the respective directives.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>
>> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
> 
> I'm conflicted by this change.
> 
> You've clearly changed your mind since you rejected my patch introducing
> this infrastructure and starting to use it.

Hmm, to be honest I don't recall me rejecting such work of yours.
In fact I have always been in favor of properly typing symbols,
where sensible and possible. I would therefore assume it was more
the "how" than the "that" which I wasn't happy with. If you have
a reference to the old thread to hand, I'd be interested in
looking up what made me oppose back at the time.

> Given that it is a reoccurring bug with livepatching which has been in
> need of fixing since 2018, I'd organised some work to port Linux's
> linkage.h as something more likely to have been acceptable.

Taking what they've got would likely be fine as well. At least in
a suitably stripped down manner (looking at their header they may
have gone a little overboard with this).

Jan

Re: [PATCH 1/2] x86: improve .debug_line contents for assembly sources

[Roger Pau Monné]

On Thu, Apr 14, 2022 at 02:52:47PM +0200, Jan Beulich wrote:
> On 14.04.2022 14:40, Roger Pau Monné wrote:
> > On Tue, Apr 12, 2022 at 12:27:34PM +0200, Jan Beulich wrote:
> >> While future gas versions will allow line number information to be
> >> generated for all instances of .irp and alike [1][2], the same isn't
> >> true (nor immediately intended) for .macro [3]. Hence macros, when they
> >> do more than just invoke another macro or issue an individual insn, want
> >> to have .line directives (in header files also .file ones) in place.
> >>
> >> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> >>
> >> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=7992631e8c0b0e711fbaba991348ef6f6e583725
> >> [2] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=2ee1792bec225ea19c71095cee5a3a9ae6df7c59
> >> [3] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=6d1ace6861e999361b30d1bc27459ab8094e0d4a
> >> ---
> >> Using .file has the perhaps undesirable side effect of generating a fair
> >> amount of (all identical) STT_FILE entries in the symbol table. We also
> >> can't use the supposedly assembler-internal (and hence undocumented)
> >> .appfile anymore, as it was removed [4]. Note that .linefile (also
> >> internal/undocumented) as well as the "# <line> <file>" constructs the
> >> compiler emits, leading to .linefile insertion by the assembler, aren't
> >> of use anyway as these are processed and purged when processing .macro
> >> [3].
> >>
> >> [4] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=c39e89c3aaa3a6790f85e80f2da5022bc4bce38b
> >>
> >> --- a/xen/arch/x86/include/asm/spec_ctrl_asm.h
> >> +++ b/xen/arch/x86/include/asm/spec_ctrl_asm.h
> >> @@ -24,6 +24,8 @@
> >>  #include <asm/msr-index.h>
> >>  #include <asm/spec_ctrl.h>
> >>  
> >> +#define FILE_AND_LINE .file __FILE__; .line __LINE__
> > 
> > Seeing as this seems to get added to all macros below, I guess you did
> > consider (and discarded) introducing a preprocessor macro do to the
> > asm macro definitons:
> > 
> > #define DECLARE_MACRO(n, ...) \
> > .macro n __VA_ARGS__ \
> >     .file __FILE__; .line __LINE__
> 
> No, I didn't even consider that. I view such as too obfuscating - there's
> then e.g. no visual match with the .endm. Furthermore, as outlined in the
> description, I don't think this wants applying uniformly. There are
> macros which better don't have this added. Yet I also would prefer to not
> end up with a mix of .macro and DECLARE_MACRO().

I think it's a dummy question, but why would we want to add this to
some macros?

Isn't it better to always have the file and line reference where the
macro gets used?

Thanks, Roger.

Re: [PATCH 1/2] x86: improve .debug_line contents for assembly sources

[Roger Pau Monné]

On Thu, Apr 14, 2022 at 03:31:26PM +0200, Roger Pau Monné wrote:
> On Thu, Apr 14, 2022 at 02:52:47PM +0200, Jan Beulich wrote:
> > On 14.04.2022 14:40, Roger Pau Monné wrote:
> > > On Tue, Apr 12, 2022 at 12:27:34PM +0200, Jan Beulich wrote:
> > >> While future gas versions will allow line number information to be
> > >> generated for all instances of .irp and alike [1][2], the same isn't
> > >> true (nor immediately intended) for .macro [3]. Hence macros, when they
> > >> do more than just invoke another macro or issue an individual insn, want
> > >> to have .line directives (in header files also .file ones) in place.
> > >>
> > >> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> > >>
> > >> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=7992631e8c0b0e711fbaba991348ef6f6e583725
> > >> [2] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=2ee1792bec225ea19c71095cee5a3a9ae6df7c59
> > >> [3] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=6d1ace6861e999361b30d1bc27459ab8094e0d4a
> > >> ---
> > >> Using .file has the perhaps undesirable side effect of generating a fair
> > >> amount of (all identical) STT_FILE entries in the symbol table. We also
> > >> can't use the supposedly assembler-internal (and hence undocumented)
> > >> .appfile anymore, as it was removed [4]. Note that .linefile (also
> > >> internal/undocumented) as well as the "# <line> <file>" constructs the
> > >> compiler emits, leading to .linefile insertion by the assembler, aren't
> > >> of use anyway as these are processed and purged when processing .macro
> > >> [3].
> > >>
> > >> [4] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=c39e89c3aaa3a6790f85e80f2da5022bc4bce38b
> > >>
> > >> --- a/xen/arch/x86/include/asm/spec_ctrl_asm.h
> > >> +++ b/xen/arch/x86/include/asm/spec_ctrl_asm.h
> > >> @@ -24,6 +24,8 @@
> > >>  #include <asm/msr-index.h>
> > >>  #include <asm/spec_ctrl.h>
> > >>  
> > >> +#define FILE_AND_LINE .file __FILE__; .line __LINE__
> > > 
> > > Seeing as this seems to get added to all macros below, I guess you did
> > > consider (and discarded) introducing a preprocessor macro do to the
> > > asm macro definitons:
> > > 
> > > #define DECLARE_MACRO(n, ...) \
> > > .macro n __VA_ARGS__ \
> > >     .file __FILE__; .line __LINE__
> > 
> > No, I didn't even consider that. I view such as too obfuscating - there's
> > then e.g. no visual match with the .endm. Furthermore, as outlined in the
> > description, I don't think this wants applying uniformly. There are
> > macros which better don't have this added. Yet I also would prefer to not
> > end up with a mix of .macro and DECLARE_MACRO().
> 
> I think it's a dummy question, but why would we want to add this to
                                              ^n't

Sorry.

Re: [PATCH 1/2] x86: improve .debug_line contents for assembly sources

[Jan Beulich]

On 14.04.2022 15:31, Roger Pau Monné wrote:
> On Thu, Apr 14, 2022 at 02:52:47PM +0200, Jan Beulich wrote:
>> On 14.04.2022 14:40, Roger Pau Monné wrote:
>>> On Tue, Apr 12, 2022 at 12:27:34PM +0200, Jan Beulich wrote:
>>>> While future gas versions will allow line number information to be
>>>> generated for all instances of .irp and alike [1][2], the same isn't
>>>> true (nor immediately intended) for .macro [3]. Hence macros, when they
>>>> do more than just invoke another macro or issue an individual insn, want
>>>> to have .line directives (in header files also .file ones) in place.
>>>>
>>>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>>>
>>>> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=7992631e8c0b0e711fbaba991348ef6f6e583725
>>>> [2] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=2ee1792bec225ea19c71095cee5a3a9ae6df7c59
>>>> [3] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=6d1ace6861e999361b30d1bc27459ab8094e0d4a
>>>> ---
>>>> Using .file has the perhaps undesirable side effect of generating a fair
>>>> amount of (all identical) STT_FILE entries in the symbol table. We also
>>>> can't use the supposedly assembler-internal (and hence undocumented)
>>>> .appfile anymore, as it was removed [4]. Note that .linefile (also
>>>> internal/undocumented) as well as the "# <line> <file>" constructs the
>>>> compiler emits, leading to .linefile insertion by the assembler, aren't
>>>> of use anyway as these are processed and purged when processing .macro
>>>> [3].
>>>>
>>>> [4] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=c39e89c3aaa3a6790f85e80f2da5022bc4bce38b
>>>>
>>>> --- a/xen/arch/x86/include/asm/spec_ctrl_asm.h
>>>> +++ b/xen/arch/x86/include/asm/spec_ctrl_asm.h
>>>> @@ -24,6 +24,8 @@
>>>>  #include <asm/msr-index.h>
>>>>  #include <asm/spec_ctrl.h>
>>>>  
>>>> +#define FILE_AND_LINE .file __FILE__; .line __LINE__
>>>
>>> Seeing as this seems to get added to all macros below, I guess you did
>>> consider (and discarded) introducing a preprocessor macro do to the
>>> asm macro definitons:
>>>
>>> #define DECLARE_MACRO(n, ...) \
>>> .macro n __VA_ARGS__ \
>>>     .file __FILE__; .line __LINE__
>>
>> No, I didn't even consider that. I view such as too obfuscating - there's
>> then e.g. no visual match with the .endm. Furthermore, as outlined in the
>> description, I don't think this wants applying uniformly. There are
>> macros which better don't have this added. Yet I also would prefer to not
>> end up with a mix of .macro and DECLARE_MACRO().
> 
> I think it's a dummy question, but why would we want to add this to
> some macros?
> 
> Isn't it better to always have the file and line reference where the
> macro gets used?

Like said in the description, a macro simply invoking another macro,
or a macro simply wrapping a single insn, is likely better to have
its generated code associated with the original line number. Complex
macros, otoh, are imo often better to have line numbers associated
with actual macro contents. IOW to some degree I support the cited
workaround in binutils (which has been there for many years).

Jan

Re: [PATCH 1/2] x86: improve .debug_line contents for assembly sources

[Roger Pau Monné]

On Thu, Apr 14, 2022 at 04:15:22PM +0200, Jan Beulich wrote:
> On 14.04.2022 15:31, Roger Pau Monné wrote:
> > On Thu, Apr 14, 2022 at 02:52:47PM +0200, Jan Beulich wrote:
> >> On 14.04.2022 14:40, Roger Pau Monné wrote:
> >>> On Tue, Apr 12, 2022 at 12:27:34PM +0200, Jan Beulich wrote:
> >>>> While future gas versions will allow line number information to be
> >>>> generated for all instances of .irp and alike [1][2], the same isn't
> >>>> true (nor immediately intended) for .macro [3]. Hence macros, when they
> >>>> do more than just invoke another macro or issue an individual insn, want
> >>>> to have .line directives (in header files also .file ones) in place.
> >>>>
> >>>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> >>>>
> >>>> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=7992631e8c0b0e711fbaba991348ef6f6e583725
> >>>> [2] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=2ee1792bec225ea19c71095cee5a3a9ae6df7c59
> >>>> [3] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=6d1ace6861e999361b30d1bc27459ab8094e0d4a
> >>>> ---
> >>>> Using .file has the perhaps undesirable side effect of generating a fair
> >>>> amount of (all identical) STT_FILE entries in the symbol table. We also
> >>>> can't use the supposedly assembler-internal (and hence undocumented)
> >>>> .appfile anymore, as it was removed [4]. Note that .linefile (also
> >>>> internal/undocumented) as well as the "# <line> <file>" constructs the
> >>>> compiler emits, leading to .linefile insertion by the assembler, aren't
> >>>> of use anyway as these are processed and purged when processing .macro
> >>>> [3].
> >>>>
> >>>> [4] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=c39e89c3aaa3a6790f85e80f2da5022bc4bce38b
> >>>>
> >>>> --- a/xen/arch/x86/include/asm/spec_ctrl_asm.h
> >>>> +++ b/xen/arch/x86/include/asm/spec_ctrl_asm.h
> >>>> @@ -24,6 +24,8 @@
> >>>>  #include <asm/msr-index.h>
> >>>>  #include <asm/spec_ctrl.h>
> >>>>  
> >>>> +#define FILE_AND_LINE .file __FILE__; .line __LINE__
> >>>
> >>> Seeing as this seems to get added to all macros below, I guess you did
> >>> consider (and discarded) introducing a preprocessor macro do to the
> >>> asm macro definitons:
> >>>
> >>> #define DECLARE_MACRO(n, ...) \
> >>> .macro n __VA_ARGS__ \
> >>>     .file __FILE__; .line __LINE__
> >>
> >> No, I didn't even consider that. I view such as too obfuscating - there's
> >> then e.g. no visual match with the .endm. Furthermore, as outlined in the
> >> description, I don't think this wants applying uniformly. There are
> >> macros which better don't have this added. Yet I also would prefer to not
> >> end up with a mix of .macro and DECLARE_MACRO().
> > 
> > I think it's a dummy question, but why would we want to add this to
> > some macros?
> > 
> > Isn't it better to always have the file and line reference where the
> > macro gets used?
> 
> Like said in the description, a macro simply invoking another macro,
> or a macro simply wrapping a single insn, is likely better to have
> its generated code associated with the original line number. Complex
> macros, otoh, are imo often better to have line numbers associated
> with actual macro contents. IOW to some degree I support the cited
> workaround in binutils (which has been there for many years).

Seems a bit ad-hoc policy, but it's you and Andrew that mostly deal
with this stuff, so if you are fine with it.

Acked-by: roger Pau Monné <roger.pau@citrix.com>

Thanks, Roger.

Re: [PATCH 1/2] x86: improve .debug_line contents for assembly sources

[Jan Beulich]

On 14.04.2022 18:02, Roger Pau Monné wrote:
> On Thu, Apr 14, 2022 at 04:15:22PM +0200, Jan Beulich wrote:
>> On 14.04.2022 15:31, Roger Pau Monné wrote:
>>> On Thu, Apr 14, 2022 at 02:52:47PM +0200, Jan Beulich wrote:
>>>> On 14.04.2022 14:40, Roger Pau Monné wrote:
>>>>> On Tue, Apr 12, 2022 at 12:27:34PM +0200, Jan Beulich wrote:
>>>>>> While future gas versions will allow line number information to be
>>>>>> generated for all instances of .irp and alike [1][2], the same isn't
>>>>>> true (nor immediately intended) for .macro [3]. Hence macros, when they
>>>>>> do more than just invoke another macro or issue an individual insn, want
>>>>>> to have .line directives (in header files also .file ones) in place.
>>>>>>
>>>>>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>>>>>
>>>>>> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=7992631e8c0b0e711fbaba991348ef6f6e583725
>>>>>> [2] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=2ee1792bec225ea19c71095cee5a3a9ae6df7c59
>>>>>> [3] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=6d1ace6861e999361b30d1bc27459ab8094e0d4a
>>>>>> ---
>>>>>> Using .file has the perhaps undesirable side effect of generating a fair
>>>>>> amount of (all identical) STT_FILE entries in the symbol table. We also
>>>>>> can't use the supposedly assembler-internal (and hence undocumented)
>>>>>> .appfile anymore, as it was removed [4]. Note that .linefile (also
>>>>>> internal/undocumented) as well as the "# <line> <file>" constructs the
>>>>>> compiler emits, leading to .linefile insertion by the assembler, aren't
>>>>>> of use anyway as these are processed and purged when processing .macro
>>>>>> [3].
>>>>>>
>>>>>> [4] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=c39e89c3aaa3a6790f85e80f2da5022bc4bce38b
>>>>>>
>>>>>> --- a/xen/arch/x86/include/asm/spec_ctrl_asm.h
>>>>>> +++ b/xen/arch/x86/include/asm/spec_ctrl_asm.h
>>>>>> @@ -24,6 +24,8 @@
>>>>>>  #include <asm/msr-index.h>
>>>>>>  #include <asm/spec_ctrl.h>
>>>>>>  
>>>>>> +#define FILE_AND_LINE .file __FILE__; .line __LINE__
>>>>>
>>>>> Seeing as this seems to get added to all macros below, I guess you did
>>>>> consider (and discarded) introducing a preprocessor macro do to the
>>>>> asm macro definitons:
>>>>>
>>>>> #define DECLARE_MACRO(n, ...) \
>>>>> .macro n __VA_ARGS__ \
>>>>>     .file __FILE__; .line __LINE__
>>>>
>>>> No, I didn't even consider that. I view such as too obfuscating - there's
>>>> then e.g. no visual match with the .endm. Furthermore, as outlined in the
>>>> description, I don't think this wants applying uniformly. There are
>>>> macros which better don't have this added. Yet I also would prefer to not
>>>> end up with a mix of .macro and DECLARE_MACRO().
>>>
>>> I think it's a dummy question, but why would we want to add this to
>>> some macros?
>>>
>>> Isn't it better to always have the file and line reference where the
>>> macro gets used?
>>
>> Like said in the description, a macro simply invoking another macro,
>> or a macro simply wrapping a single insn, is likely better to have
>> its generated code associated with the original line number. Complex
>> macros, otoh, are imo often better to have line numbers associated
>> with actual macro contents. IOW to some degree I support the cited
>> workaround in binutils (which has been there for many years).
> 
> Seems a bit ad-hoc policy, but it's you and Andrew that mostly deal
> with this stuff, so if you are fine with it.

What other rule of thumb would you suggest? I'd be happy to take
suggestions rather than force in something which looks to be not
entirely uncontroversial.

> Acked-by: roger Pau Monné <roger.pau@citrix.com>

Thanks. Given the above, I guess I'll apply this only provisionally.

Jan

Re: [PATCH 1/2] x86: improve .debug_line contents for assembly sources

[Jan Beulich]

On 14.04.2022 18:02, Roger Pau Monné wrote:
> On Thu, Apr 14, 2022 at 04:15:22PM +0200, Jan Beulich wrote:
>> On 14.04.2022 15:31, Roger Pau Monné wrote:
>>> On Thu, Apr 14, 2022 at 02:52:47PM +0200, Jan Beulich wrote:
>>>> On 14.04.2022 14:40, Roger Pau Monné wrote:
>>>>> On Tue, Apr 12, 2022 at 12:27:34PM +0200, Jan Beulich wrote:
>>>>>> While future gas versions will allow line number information to be
>>>>>> generated for all instances of .irp and alike [1][2], the same isn't
>>>>>> true (nor immediately intended) for .macro [3]. Hence macros, when they
>>>>>> do more than just invoke another macro or issue an individual insn, want
>>>>>> to have .line directives (in header files also .file ones) in place.
>>>>>>
>>>>>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>>>>>
>>>>>> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=7992631e8c0b0e711fbaba991348ef6f6e583725
>>>>>> [2] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=2ee1792bec225ea19c71095cee5a3a9ae6df7c59
>>>>>> [3] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=6d1ace6861e999361b30d1bc27459ab8094e0d4a
>>>>>> ---
>>>>>> Using .file has the perhaps undesirable side effect of generating a fair
>>>>>> amount of (all identical) STT_FILE entries in the symbol table. We also
>>>>>> can't use the supposedly assembler-internal (and hence undocumented)
>>>>>> .appfile anymore, as it was removed [4]. Note that .linefile (also
>>>>>> internal/undocumented) as well as the "# <line> <file>" constructs the
>>>>>> compiler emits, leading to .linefile insertion by the assembler, aren't
>>>>>> of use anyway as these are processed and purged when processing .macro
>>>>>> [3].
>>>>>>
>>>>>> [4] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=c39e89c3aaa3a6790f85e80f2da5022bc4bce38b
>>>>>>
>>>>>> --- a/xen/arch/x86/include/asm/spec_ctrl_asm.h
>>>>>> +++ b/xen/arch/x86/include/asm/spec_ctrl_asm.h
>>>>>> @@ -24,6 +24,8 @@
>>>>>>  #include <asm/msr-index.h>
>>>>>>  #include <asm/spec_ctrl.h>
>>>>>>  
>>>>>> +#define FILE_AND_LINE .file __FILE__; .line __LINE__
>>>>>
>>>>> Seeing as this seems to get added to all macros below, I guess you did
>>>>> consider (and discarded) introducing a preprocessor macro do to the
>>>>> asm macro definitons:
>>>>>
>>>>> #define DECLARE_MACRO(n, ...) \
>>>>> .macro n __VA_ARGS__ \
>>>>>     .file __FILE__; .line __LINE__
>>>>
>>>> No, I didn't even consider that. I view such as too obfuscating - there's
>>>> then e.g. no visual match with the .endm. Furthermore, as outlined in the
>>>> description, I don't think this wants applying uniformly. There are
>>>> macros which better don't have this added. Yet I also would prefer to not
>>>> end up with a mix of .macro and DECLARE_MACRO().
>>>
>>> I think it's a dummy question, but why would we want to add this to
>>> some macros?
>>>
>>> Isn't it better to always have the file and line reference where the
>>> macro gets used?
>>
>> Like said in the description, a macro simply invoking another macro,
>> or a macro simply wrapping a single insn, is likely better to have
>> its generated code associated with the original line number. Complex
>> macros, otoh, are imo often better to have line numbers associated
>> with actual macro contents. IOW to some degree I support the cited
>> workaround in binutils (which has been there for many years).
> 
> Seems a bit ad-hoc policy, but it's you and Andrew that mostly deal
> with this stuff, so if you are fine with it.

Actually I think I'll withdraw this patch. After quite a bit of further
consideration, it should really be the assembler to get this right, and
once properly working there the directives added here may actually get
in the way.

Jan

Re: [PATCH 2/2] x86: annotate entry points with type and size

[Jan Beulich]

On 14.04.2022 14:59, Jan Beulich wrote:
> On 14.04.2022 14:49, Andrew Cooper wrote:
>> On 12/04/2022 11:28, Jan Beulich wrote:
>>> Future gas versions will generate minimalistic Dwarf debug info for
>>> items annotated as functions and having their sizes specified [1].
>>> "Borrow" Arm's END() and ENDPROC() to avoid open-coding (and perhaps
>>> typo-ing) the respective directives.
>>>
>>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>>
>>> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
>>
>> I'm conflicted by this change.
>>
>> You've clearly changed your mind since you rejected my patch introducing
>> this infrastructure and starting to use it.
> 
> Hmm, to be honest I don't recall me rejecting such work of yours.
> In fact I have always been in favor of properly typing symbols,
> where sensible and possible. I would therefore assume it was more
> the "how" than the "that" which I wasn't happy with. If you have
> a reference to the old thread to hand, I'd be interested in
> looking up what made me oppose back at the time.
> 
>> Given that it is a reoccurring bug with livepatching which has been in
>> need of fixing since 2018, I'd organised some work to port Linux's
>> linkage.h as something more likely to have been acceptable.
> 
> Taking what they've got would likely be fine as well. At least in
> a suitably stripped down manner (looking at their header they may
> have gone a little overboard with this).

Over two months have passed. I wonder whether I had misunderstood your
reply: I took it to mean an alternative patch or series would be
posted. In the absence of that and considering that you say that you
did want such annotations anyway, I wonder what it is that stands in
the way of these two patches making it in.

Jan

[PATCH v2 0/2] x86: annotate entry points with type and size

[Jan Beulich]

The model introduced in patch 1 is in principle arch-agnostic, hence
why I'm including Arm and RISC-V reviewers here as well.

1: annotate entry points with type and size
2: also mark assembler globals hidden

Jan

[PATCH v2 1/2] x86: annotate entry points with type and size

[Jan Beulich]

Recent gas versions generate minimalistic Dwarf debug info for items
annotated as functions and having their sizes specified [1]. "Borrow"
Arm's END() and (remotely) derive other annotation infrastructure from
Linux'es.

For switch_to_kernel() and restore_all_guest() so far implicit alignment
(from being first in their respective sections) is being made explicit
(as in: using FUNC() without 2nd argument). Whereas for
{,compat}create_bounce_frame() and autogen_entrypoints[] alignment is
newly arranged for.

Except for the added alignment padding (including their knock-on
effects) no change in generated code/data.

Signed-off-by: Jan Beulich <jbeulich@suse.com>

[1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
---
v2: Full rework.
---
Only two of the assembly files are being converted for now. More could
be done right here or as follow-on in separate patches.

In principle the framework should be possible to use by other
architectures as well. If we want this, the main questions are going to
be:
- What header file name? (I don't really like Linux'es linkage.h, so I'd
  prefer e.g. asm-defns.h or asm_defns.h as we already have in x86.)
- How much per-arch customization do we want to permit up front (i.e.
  without knowing how much of it is going to be needed)? Initially I'd
  expect only the default function alignment (and padding) to require
  per-arch definitions.

Note that the FB-label in autogen_stubs() cannot be converted just yet:
Such labels cannot be used with .type. We could further diverge from
Linux'es model and avoid setting STT_NOTYPE explicitly (that's the type
labels get by default anyway).

Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
still have ALIGN.

--- a/xen/arch/x86/include/asm/asm_defns.h
+++ b/xen/arch/x86/include/asm/asm_defns.h
@@ -81,6 +81,45 @@ register unsigned long current_stack_poi
 
 #ifdef __ASSEMBLY__
 
+#define SYM_ALIGN(algn...) .balign algn
+
+#define SYM_L_GLOBAL(name) .globl name
+#define SYM_L_WEAK(name)   .weak name
+#define SYM_L_LOCAL(name)  /* nothing */
+
+#define SYM_T_FUNC         STT_FUNC
+#define SYM_T_DATA         STT_OBJECT
+#define SYM_T_NONE         STT_NOTYPE
+
+#define SYM(name, typ, linkage, algn...)          \
+        .type name, SYM_T_ ## typ;                \
+        SYM_L_ ## linkage(name);                  \
+        SYM_ALIGN(algn);                          \
+        name:
+
+#define END(name) .size name, . - name
+
+#define ARG1_(x, y...) (x)
+#define ARG2_(x, y...) ARG1_(y)
+
+#define LAST__(nr) ARG ## nr ## _
+#define LAST_(nr)  LAST__(nr)
+#define LAST(x, y...) LAST_(count_args(x, ## y))(x, ## y)
+
+#define FUNC(name, algn...) \
+        SYM(name, FUNC, GLOBAL, LAST(16, ## algn), 0x90)
+#define LABEL(name, algn...) \
+        SYM(name, NONE, GLOBAL, LAST(16, ## algn), 0x90)
+#define DATA(name, algn...) \
+        SYM(name, DATA, GLOBAL, LAST(0, ## algn), 0xff)
+
+#define FUNC_LOCAL(name, algn...) \
+        SYM(name, FUNC, LOCAL, LAST(16, ## algn), 0x90)
+#define LABEL_LOCAL(name, algn...) \
+        SYM(name, NONE, LOCAL, LAST(16, ## algn), 0x90)
+#define DATA_LOCAL(name, algn...) \
+        SYM(name, DATA, LOCAL, LAST(0, ## algn), 0xff)
+
 #ifdef HAVE_AS_QUOTED_SYM
 #define SUBSECTION_LBL(tag)                        \
         .ifndef .L.tag;                            \
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -8,10 +8,11 @@
 #include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/desc.h>
+#include <xen/lib.h>
 #include <public/xen.h>
 #include <irq_vectors.h>
 
-ENTRY(entry_int82)
+FUNC(entry_int82)
         ENDBR64
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $0
@@ -27,9 +28,10 @@ ENTRY(entry_int82)
 
         mov   %rsp, %rdi
         call  do_entry_int82
+END(entry_int82)
 
 /* %rbx: struct vcpu */
-ENTRY(compat_test_all_events)
+FUNC(compat_test_all_events)
         ASSERT_NOT_IN_ATOMIC
         cli                             # tests must not race interrupts
 /*compat_test_softirqs:*/
@@ -66,24 +68,21 @@ compat_test_guest_events:
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-compat_process_softirqs:
+LABEL_LOCAL(compat_process_softirqs)
         sti
         call  do_softirq
         jmp   compat_test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu, %rdx: struct trap_bounce */
-.Lcompat_process_trapbounce:
+LABEL_LOCAL(.Lcompat_process_trapbounce)
         sti
 .Lcompat_bounce_exception:
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
 
-	ALIGN
 /* %rbx: struct vcpu */
-compat_process_mce:
+LABEL_LOCAL(compat_process_mce)
         testb $1 << VCPU_TRAP_MCE,VCPU_async_exception_mask(%rbx)
         jnz   .Lcompat_test_guest_nmi
         sti
@@ -97,9 +96,8 @@ compat_process_mce:
         movb %dl,VCPU_async_exception_mask(%rbx)
         jmp   compat_process_trap
 
-	ALIGN
 /* %rbx: struct vcpu */
-compat_process_nmi:
+LABEL_LOCAL(compat_process_nmi)
         testb $1 << VCPU_TRAP_NMI,VCPU_async_exception_mask(%rbx)
         jnz   compat_test_guest_events
         sti
@@ -116,9 +114,10 @@ compat_process_trap:
         leaq  VCPU_trap_bounce(%rbx),%rdx
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_test_all_events)
 
 /* %rbx: struct vcpu, interrupts disabled */
-ENTRY(compat_restore_all_guest)
+FUNC(compat_restore_all_guest)
         ASSERT_INTERRUPTS_DISABLED
         mov   $~(X86_EFLAGS_IOPL | X86_EFLAGS_VM), %r11d
         and   UREGS_eflags(%rsp),%r11d
@@ -161,9 +160,10 @@ ENTRY(compat_restore_all_guest)
         RESTORE_ALL adj=8 compat=1
 .Lft0:  iretq
         _ASM_PRE_EXTABLE(.Lft0, handle_exception)
+END(compat_restore_all_guest)
 
 /* This mustn't modify registers other than %rax. */
-ENTRY(cr4_pv32_restore)
+FUNC(cr4_pv32_restore)
         push  %rdx
         GET_CPUINFO_FIELD(cr4, dx)
         mov   (%rdx), %rax
@@ -193,8 +193,9 @@ ENTRY(cr4_pv32_restore)
         pop   %rdx
         xor   %eax, %eax
         ret
+END(cr4_pv32_restore)
 
-ENTRY(compat_syscall)
+FUNC(compat_syscall)
         /* Fix up reported %cs/%ss for compat domains. */
         movl  $FLAT_COMPAT_USER_SS, UREGS_ss(%rsp)
         movl  $FLAT_COMPAT_USER_CS, UREGS_cs(%rsp)
@@ -222,8 +223,9 @@ UNLIKELY_END(compat_syscall_gpf)
         movw  %si,TRAPBOUNCE_cs(%rdx)
         movb  %cl,TRAPBOUNCE_flags(%rdx)
         jmp   .Lcompat_bounce_exception
+END(compat_syscall)
 
-ENTRY(compat_sysenter)
+FUNC(compat_sysenter)
         CR4_PV32_RESTORE
         movq  VCPU_trap_ctxt(%rbx),%rcx
         cmpb  $X86_EXC_GP, UREGS_entry_vector(%rsp)
@@ -236,17 +238,19 @@ ENTRY(compat_sysenter)
         movw  %ax,TRAPBOUNCE_cs(%rdx)
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_sysenter)
 
-ENTRY(compat_int80_direct_trap)
+FUNC(compat_int80_direct_trap)
         CR4_PV32_RESTORE
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_int80_direct_trap)
 
 /* CREATE A BASIC EXCEPTION FRAME ON GUEST OS (RING-1) STACK:            */
 /*   {[ERRCODE,] EIP, CS, EFLAGS, [ESP, SS]}                             */
 /* %rdx: trap_bounce, %rbx: struct vcpu                                  */
 /* On return only %rbx and %rdx are guaranteed non-clobbered.            */
-compat_create_bounce_frame:
+FUNC_LOCAL(compat_create_bounce_frame)
         ASSERT_INTERRUPTS_ENABLED
         mov   %fs,%edi
         ALTERNATIVE "", stac, X86_FEATURE_XEN_SMAP
@@ -352,3 +356,4 @@ compat_crash_page_fault:
         jmp   .Lft14
 .previous
         _ASM_EXTABLE(.Lft14, .Lfx14)
+END(compat_create_bounce_frame)
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -9,6 +9,7 @@
 #include <asm/asm_defns.h>
 #include <asm/page.h>
 #include <asm/processor.h>
+#include <xen/lib.h>
 #include <public/xen.h>
 #include <irq_vectors.h>
 
@@ -24,7 +25,7 @@
 
 #ifdef CONFIG_PV
 /* %rbx: struct vcpu */
-switch_to_kernel:
+FUNC_LOCAL(switch_to_kernel)
         leaq  VCPU_trap_bounce(%rbx),%rdx
 
         /* TB_eip = 32-bit syscall ? syscall32_addr : syscall_addr */
@@ -89,24 +90,21 @@ test_guest_events:
         call  create_bounce_frame
         jmp   test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_softirqs:
+LABEL_LOCAL(process_softirqs)
         sti
         call do_softirq
         jmp  test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu, %rdx struct trap_bounce */
-.Lprocess_trapbounce:
+LABEL_LOCAL(.Lprocess_trapbounce)
         sti
 .Lbounce_exception:
         call  create_bounce_frame
         jmp   test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_mce:
+LABEL_LOCAL(process_mce)
         testb $1 << VCPU_TRAP_MCE, VCPU_async_exception_mask(%rbx)
         jnz  .Ltest_guest_nmi
         sti
@@ -120,9 +118,8 @@ process_mce:
         movb %dl, VCPU_async_exception_mask(%rbx)
         jmp  process_trap
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_nmi:
+LABEL_LOCAL(process_nmi)
         testb $1 << VCPU_TRAP_NMI, VCPU_async_exception_mask(%rbx)
         jnz  test_guest_events
         sti
@@ -139,11 +136,12 @@ process_trap:
         leaq VCPU_trap_bounce(%rbx), %rdx
         call create_bounce_frame
         jmp  test_all_events
+END(switch_to_kernel)
 
         .section .text.entry, "ax", @progbits
 
 /* %rbx: struct vcpu, interrupts disabled */
-restore_all_guest:
+FUNC_LOCAL(restore_all_guest)
         ASSERT_INTERRUPTS_DISABLED
 
         /* Stash guest SPEC_CTRL value while we can read struct vcpu. */
@@ -220,8 +218,7 @@ restore_all_guest:
         sysretq
 1:      sysretl
 
-        ALIGN
-.Lrestore_rcx_iret_exit_to_guest:
+LABEL_LOCAL(.Lrestore_rcx_iret_exit_to_guest)
         movq  8(%rsp), %rcx           # RIP
 /* No special register assumptions. */
 iret_exit_to_guest:
@@ -230,6 +227,7 @@ iret_exit_to_guest:
         addq  $8,%rsp
 .Lft0:  iretq
         _ASM_PRE_EXTABLE(.Lft0, handle_exception)
+END(restore_all_guest)
 
 /*
  * When entering SYSCALL from kernel mode:
@@ -246,7 +244,7 @@ iret_exit_to_guest:
  *  - Guest %rsp stored in %rax
  *  - Xen stack loaded, pointing at the %ss slot
  */
-ENTRY(lstar_enter)
+FUNC(lstar_enter)
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
 #endif
@@ -281,9 +279,10 @@ ENTRY(lstar_enter)
         mov   %rsp, %rdi
         call  pv_hypercall
         jmp   test_all_events
+END(lstar_enter)
 
 /* See lstar_enter for entry register state. */
-ENTRY(cstar_enter)
+FUNC(cstar_enter)
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
 #endif
@@ -321,8 +320,9 @@ ENTRY(cstar_enter)
         jne   compat_syscall
 #endif
         jmp   switch_to_kernel
+END(cstar_enter)
 
-ENTRY(sysenter_entry)
+FUNC(sysenter_entry)
         ENDBR64
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
@@ -331,7 +331,7 @@ ENTRY(sysenter_entry)
         pushq $FLAT_USER_SS
         pushq $0
         pushfq
-GLOBAL(sysenter_eflags_saved)
+LABEL(sysenter_eflags_saved, 0)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $3 /* ring 3 null cs */
         pushq $0 /* null rip */
@@ -385,8 +385,9 @@ UNLIKELY_END(sysenter_gpf)
         jne   compat_sysenter
 #endif
         jmp   .Lbounce_exception
+END(sysenter_entry)
 
-ENTRY(int80_direct_trap)
+FUNC(int80_direct_trap)
         ENDBR64
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $0
@@ -474,6 +475,7 @@ int80_slow_path:
          */
         GET_STACK_END(14)
         jmp   handle_exception_saved
+END(int80_direct_trap)
 
         /* create_bounce_frame & helpers don't need to be in .text.entry */
         .text
@@ -482,7 +484,7 @@ int80_slow_path:
 /*   { RCX, R11, [ERRCODE,] RIP, CS, RFLAGS, RSP, SS }                   */
 /* %rdx: trap_bounce, %rbx: struct vcpu                                  */
 /* On return only %rbx and %rdx are guaranteed non-clobbered.            */
-create_bounce_frame:
+FUNC_LOCAL(create_bounce_frame)
         ASSERT_INTERRUPTS_ENABLED
         testb $TF_kernel_mode,VCPU_thread_flags(%rbx)
         jnz   1f
@@ -618,6 +620,7 @@ ENTRY(dom_crash_sync_extable)
         xorl  %edi,%edi
         jmp   asm_domain_crash_synchronous /* Does not return */
         .popsection
+END(create_bounce_frame)
 #endif /* CONFIG_PV */
 
 /* --- CODE BELOW THIS LINE (MOSTLY) NOT GUEST RELATED --- */
@@ -626,7 +629,7 @@ ENTRY(dom_crash_sync_extable)
 
 /* No special register assumptions. */
 #ifdef CONFIG_PV
-ENTRY(continue_pv_domain)
+FUNC(continue_pv_domain)
         ENDBR64
         call  check_wakeup_from_wait
 ret_from_intr:
@@ -641,26 +644,28 @@ ret_from_intr:
 #else
         jmp   test_all_events
 #endif
+END(continue_pv_domain)
 #else
-ret_from_intr:
+FUNC(ret_from_intr, 0)
         ASSERT_CONTEXT_IS_XEN
         jmp   restore_all_xen
+END(ret_from_intr)
 #endif
 
         .section .init.text, "ax", @progbits
-ENTRY(early_page_fault)
+FUNC(early_page_fault)
         ENDBR64
         movl  $X86_EXC_PF, 4(%rsp)
         SAVE_ALL
         movq  %rsp, %rdi
         call  do_early_page_fault
         jmp   restore_all_xen
+END(early_page_fault)
 
         .section .text.entry, "ax", @progbits
 
-        ALIGN
 /* No special register assumptions. */
-restore_all_xen:
+FUNC_LOCAL(restore_all_xen)
         /*
          * Check whether we need to switch to the per-CPU page tables, in
          * case we return to late PV exit code (from an NMI or #MC).
@@ -677,8 +682,9 @@ UNLIKELY_END(exit_cr3)
 
         RESTORE_ALL adj=8
         iretq
+END(restore_all_xen)
 
-ENTRY(common_interrupt)
+FUNC(common_interrupt)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
 
@@ -707,12 +713,14 @@ ENTRY(common_interrupt)
         mov   %r15, STACK_CPUINFO_FIELD(xen_cr3)(%r14)
         mov   %bl, STACK_CPUINFO_FIELD(use_pv_cr3)(%r14)
         jmp ret_from_intr
+END(common_interrupt)
 
-ENTRY(page_fault)
+FUNC(page_fault)
         ENDBR64
         movl  $X86_EXC_PF, 4(%rsp)
+END(page_fault)
 /* No special register assumptions. */
-GLOBAL(handle_exception)
+FUNC(handle_exception, 0)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
 
@@ -882,92 +890,108 @@ FATAL_exception_with_ints_disabled:
         movq  %rsp,%rdi
         call  fatal_trap
         BUG   /* fatal_trap() shouldn't return. */
+END(handle_exception)
 
-ENTRY(divide_error)
+FUNC(divide_error)
         ENDBR64
         pushq $0
         movl  $X86_EXC_DE, 4(%rsp)
         jmp   handle_exception
+END(divide_error)
 
-ENTRY(coprocessor_error)
+FUNC(coprocessor_error)
         ENDBR64
         pushq $0
         movl  $X86_EXC_MF, 4(%rsp)
         jmp   handle_exception
+END(coprocessor_error)
 
-ENTRY(simd_coprocessor_error)
+FUNC(simd_coprocessor_error)
         ENDBR64
         pushq $0
         movl  $X86_EXC_XM, 4(%rsp)
         jmp   handle_exception
+END(coprocessor_error)
 
-ENTRY(device_not_available)
+FUNC(device_not_available)
         ENDBR64
         pushq $0
         movl  $X86_EXC_NM, 4(%rsp)
         jmp   handle_exception
+END(device_not_available)
 
-ENTRY(debug)
+FUNC(debug)
         ENDBR64
         pushq $0
         movl  $X86_EXC_DB, 4(%rsp)
         jmp   handle_ist_exception
+END(debug)
 
-ENTRY(int3)
+FUNC(int3)
         ENDBR64
         pushq $0
         movl  $X86_EXC_BP, 4(%rsp)
         jmp   handle_exception
+END(int3)
 
-ENTRY(overflow)
+FUNC(overflow)
         ENDBR64
         pushq $0
         movl  $X86_EXC_OF, 4(%rsp)
         jmp   handle_exception
+END(overflow)
 
-ENTRY(bounds)
+FUNC(bounds)
         ENDBR64
         pushq $0
         movl  $X86_EXC_BR, 4(%rsp)
         jmp   handle_exception
+END(bounds)
 
-ENTRY(invalid_op)
+FUNC(invalid_op)
         ENDBR64
         pushq $0
         movl  $X86_EXC_UD, 4(%rsp)
         jmp   handle_exception
+END(invalid_op)
 
-ENTRY(invalid_TSS)
+FUNC(invalid_TSS)
         ENDBR64
         movl  $X86_EXC_TS, 4(%rsp)
         jmp   handle_exception
+END(invalid_TSS)
 
-ENTRY(segment_not_present)
+FUNC(segment_not_present)
         ENDBR64
         movl  $X86_EXC_NP, 4(%rsp)
         jmp   handle_exception
+END(segment_not_present)
 
-ENTRY(stack_segment)
+FUNC(stack_segment)
         ENDBR64
         movl  $X86_EXC_SS, 4(%rsp)
         jmp   handle_exception
+END(stack_segment)
 
-ENTRY(general_protection)
+FUNC(general_protection)
         ENDBR64
         movl  $X86_EXC_GP, 4(%rsp)
         jmp   handle_exception
+END(general_protection)
 
-ENTRY(alignment_check)
+FUNC(alignment_check)
         ENDBR64
         movl  $X86_EXC_AC, 4(%rsp)
         jmp   handle_exception
+END(alignment_check)
 
-ENTRY(entry_CP)
+FUNC(entry_CP)
         ENDBR64
         movl  $X86_EXC_CP, 4(%rsp)
         jmp   handle_exception
+END(entry_CP)
 
-ENTRY(double_fault)
+FUNC(double_fault)
         ENDBR64
         movl  $X86_EXC_DF, 4(%rsp)
         /* Set AC to reduce chance of further SMAP faults */
@@ -991,8 +1015,9 @@ ENTRY(double_fault)
         movq  %rsp,%rdi
         call  do_double_fault
         BUG   /* do_double_fault() shouldn't return. */
+END(double_fault)
 
-ENTRY(nmi)
+FUNC(nmi)
         ENDBR64
         pushq $0
         movl  $X86_EXC_NMI, 4(%rsp)
@@ -1120,21 +1145,24 @@ handle_ist_exception:
         ASSERT_CONTEXT_IS_XEN
         jmp   restore_all_xen
 #endif
+END(nmi)
 
-ENTRY(machine_check)
+FUNC(machine_check)
         ENDBR64
         pushq $0
         movl  $X86_EXC_MC, 4(%rsp)
         jmp   handle_ist_exception
+END(machine_check)
 
 /* No op trap handler.  Required for kexec crash path. */
-GLOBAL(trap_nop)
+FUNC(trap_nop, 0)
         ENDBR64
         iretq
+END(trap_nop)
 
 /* Table of automatically generated entry points.  One per vector. */
         .pushsection .init.rodata, "a", @progbits
-GLOBAL(autogen_entrypoints)
+DATA(autogen_entrypoints, 8)
         /* pop into the .init.rodata section and record an entry point. */
         .macro entrypoint ent
         .pushsection .init.rodata, "a", @progbits
@@ -1143,7 +1171,7 @@ GLOBAL(autogen_entrypoints)
         .endm
 
         .popsection
-autogen_stubs: /* Automatically generated stubs. */
+FUNC_LOCAL(autogen_stubs, 0) /* Automatically generated stubs. */
 
         vec = 0
         .rept X86_NR_VECTORS
@@ -1187,6 +1215,7 @@ autogen_stubs: /* Automatically generate
 
         vec = vec + 1
         .endr
+END(autogen_stubs)
 
         .section .init.rodata, "a", @progbits
-        .size autogen_entrypoints, . - autogen_entrypoints
+END(autogen_entrypoints)

[PATCH v2 2/2] x86: also mark assembler globals hidden

[Jan Beulich]

Let's have assembler symbols be consistent with C ones. In principle
there are (a few) cases where gas can produce smaller code this way,
just that for now there's a gas bug causing smaller code to be emitted
even when that shouldn't be the case.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v2: New.

--- a/xen/arch/x86/include/asm/asm_defns.h
+++ b/xen/arch/x86/include/asm/asm_defns.h
@@ -83,7 +83,7 @@ register unsigned long current_stack_poi
 
 #define SYM_ALIGN(algn...) .balign algn
 
-#define SYM_L_GLOBAL(name) .globl name
+#define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
 
--- a/xen/arch/x86/include/asm/config.h
+++ b/xen/arch/x86/include/asm/config.h
@@ -45,11 +45,11 @@
 #ifdef __ASSEMBLY__
 #define ALIGN .align 16,0x90
 #define ENTRY(name)                             \
-  .globl name;                                  \
   ALIGN;                                        \
-  name:
+  GLOBAL(name)
 #define GLOBAL(name)                            \
   .globl name;                                  \
+  .hidden name;                                 \
   name:
 #endif
 

Re: [PATCH v2 1/2] x86: annotate entry points with type and size

[Roger Pau Monné]

On Tue, May 23, 2023 at 01:30:51PM +0200, Jan Beulich wrote:
> Recent gas versions generate minimalistic Dwarf debug info for items
> annotated as functions and having their sizes specified [1]. "Borrow"
> Arm's END() and (remotely) derive other annotation infrastructure from
> Linux'es.
> 
> For switch_to_kernel() and restore_all_guest() so far implicit alignment
> (from being first in their respective sections) is being made explicit
> (as in: using FUNC() without 2nd argument). Whereas for
> {,compat}create_bounce_frame() and autogen_entrypoints[] alignment is
> newly arranged for.
> 
> Except for the added alignment padding (including their knock-on
> effects) no change in generated code/data.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> 
> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
> ---
> v2: Full rework.
> ---
> Only two of the assembly files are being converted for now. More could
> be done right here or as follow-on in separate patches.
> 
> In principle the framework should be possible to use by other
> architectures as well. If we want this, the main questions are going to
> be:
> - What header file name? (I don't really like Linux'es linkage.h, so I'd
>   prefer e.g. asm-defns.h or asm_defns.h as we already have in x86.)
> - How much per-arch customization do we want to permit up front (i.e.
>   without knowing how much of it is going to be needed)? Initially I'd
>   expect only the default function alignment (and padding) to require
>   per-arch definitions.
> 
> Note that the FB-label in autogen_stubs() cannot be converted just yet:
> Such labels cannot be used with .type. We could further diverge from
> Linux'es model and avoid setting STT_NOTYPE explicitly (that's the type
> labels get by default anyway).
> 
> Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
> still have ALIGN.

FWIW, as I'm looking into using the newly added macros in order to add
annotations suitable for live-patching, I would need to switch some of
the LABEL usages into it's own functions, as it's not possible to
livepatch a function that has labels jumped into from code paths
outside of the function.

> --- a/xen/arch/x86/include/asm/asm_defns.h
> +++ b/xen/arch/x86/include/asm/asm_defns.h
> @@ -81,6 +81,45 @@ register unsigned long current_stack_poi
>  
>  #ifdef __ASSEMBLY__
>  
> +#define SYM_ALIGN(algn...) .balign algn
> +
> +#define SYM_L_GLOBAL(name) .globl name
> +#define SYM_L_WEAK(name)   .weak name

Won't this better be added when required?  I can't spot any weak
symbols in assembly ATM, and you don't introduce any _WEAK macro
variants below.

> +#define SYM_L_LOCAL(name)  /* nothing */
> +
> +#define SYM_T_FUNC         STT_FUNC
> +#define SYM_T_DATA         STT_OBJECT
> +#define SYM_T_NONE         STT_NOTYPE
> +
> +#define SYM(name, typ, linkage, algn...)          \
> +        .type name, SYM_T_ ## typ;                \
> +        SYM_L_ ## linkage(name);                  \
> +        SYM_ALIGN(algn);                          \
> +        name:
> +
> +#define END(name) .size name, . - name
> +
> +#define ARG1_(x, y...) (x)
> +#define ARG2_(x, y...) ARG1_(y)
> +
> +#define LAST__(nr) ARG ## nr ## _
> +#define LAST_(nr)  LAST__(nr)
> +#define LAST(x, y...) LAST_(count_args(x, ## y))(x, ## y)

I find LAST not very descriptive, won't it better be named OPTIONAL()
or similar? (and maybe placed in lib.h?)

> +
> +#define FUNC(name, algn...) \
> +        SYM(name, FUNC, GLOBAL, LAST(16, ## algn), 0x90)

A rant, should the alignment of functions use a different padding?
(ie: ret or ud2?) In order to prevent stray jumps falling in the
padding and fall trough into the next function.  That would also
prevent the implicit fall trough used in some places.

> +#define LABEL(name, algn...) \
> +        SYM(name, NONE, GLOBAL, LAST(16, ## algn), 0x90)
> +#define DATA(name, algn...) \
> +        SYM(name, DATA, GLOBAL, LAST(0, ## algn), 0xff)
> +
> +#define FUNC_LOCAL(name, algn...) \
> +        SYM(name, FUNC, LOCAL, LAST(16, ## algn), 0x90)
> +#define LABEL_LOCAL(name, algn...) \
> +        SYM(name, NONE, LOCAL, LAST(16, ## algn), 0x90)

Is there much value in adding local labels to the symbol table?

AFAICT the main purpose of this macro is to be used to declare aligned
labels, and here avoid the ALIGN + label name pair, but could likely
drop the .type directive?

> +#define DATA_LOCAL(name, algn...) \
> +        SYM(name, DATA, LOCAL, LAST(0, ## algn), 0xff)
> +
>  #ifdef HAVE_AS_QUOTED_SYM
>  #define SUBSECTION_LBL(tag)                        \
>          .ifndef .L.tag;                            \
> --- a/xen/arch/x86/x86_64/compat/entry.S
> +++ b/xen/arch/x86/x86_64/compat/entry.S
> @@ -8,10 +8,11 @@
>  #include <asm/page.h>
>  #include <asm/processor.h>
>  #include <asm/desc.h>
> +#include <xen/lib.h>

Shouldn't the inclusion of lib.h be in asm_defs.h, as that's where the
usage of count_args() resides? (I assume that's why lib.h is added
here).

>  #include <public/xen.h>
>  #include <irq_vectors.h>
>  
> -ENTRY(entry_int82)
> +FUNC(entry_int82)
>          ENDBR64
>          ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
>          pushq $0
> @@ -27,9 +28,10 @@ ENTRY(entry_int82)
>  
>          mov   %rsp, %rdi
>          call  do_entry_int82
> +END(entry_int82)
>  
>  /* %rbx: struct vcpu */
> -ENTRY(compat_test_all_events)
> +FUNC(compat_test_all_events)
>          ASSERT_NOT_IN_ATOMIC
>          cli                             # tests must not race interrupts
>  /*compat_test_softirqs:*/
> @@ -66,24 +68,21 @@ compat_test_guest_events:
>          call  compat_create_bounce_frame
>          jmp   compat_test_all_events
>  
> -        ALIGN
>  /* %rbx: struct vcpu */
> -compat_process_softirqs:
> +LABEL_LOCAL(compat_process_softirqs)

Shouldn't this be a local function rather than a local label?  It's
fully isolated.  I guess it would create issues with
compat_process_trap, as we would then require a jump from the
preceding compat_process_nmi.

>          sti
>          call  do_softirq
>          jmp   compat_test_all_events
>  
> -        ALIGN
>  /* %rbx: struct vcpu, %rdx: struct trap_bounce */
> -.Lcompat_process_trapbounce:
> +LABEL_LOCAL(.Lcompat_process_trapbounce)

It's my understanding that here the '.L' prefix is pointless, since
LABEL_LOCAL() will forcefully create a symbol for the label due to the
usage of .type?

Thanks, Roger.

Re: [PATCH v2 2/2] x86: also mark assembler globals hidden

[Roger Pau Monné]

On Tue, May 23, 2023 at 01:31:16PM +0200, Jan Beulich wrote:
> Let's have assembler symbols be consistent with C ones. In principle
> there are (a few) cases where gas can produce smaller code this way,
> just that for now there's a gas bug causing smaller code to be emitted
> even when that shouldn't be the case.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>

Thanks, Roger.

Re: [PATCH v2 1/2] x86: annotate entry points with type and size

[Jan Beulich]

On 29.05.2023 15:34, Roger Pau Monné wrote:
> On Tue, May 23, 2023 at 01:30:51PM +0200, Jan Beulich wrote:
>> Note that the FB-label in autogen_stubs() cannot be converted just yet:
>> Such labels cannot be used with .type. We could further diverge from
>> Linux'es model and avoid setting STT_NOTYPE explicitly (that's the type
>> labels get by default anyway).
>>
>> Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
>> still have ALIGN.
> 
> FWIW, as I'm looking into using the newly added macros in order to add
> annotations suitable for live-patching, I would need to switch some of
> the LABEL usages into it's own functions, as it's not possible to
> livepatch a function that has labels jumped into from code paths
> outside of the function.

Hmm, I'm not sure what the best way is to overcome that restriction. I'm
not convinced we want to arbitrarily name things "functions".

>> --- a/xen/arch/x86/include/asm/asm_defns.h
>> +++ b/xen/arch/x86/include/asm/asm_defns.h
>> @@ -81,6 +81,45 @@ register unsigned long current_stack_poi
>>  
>>  #ifdef __ASSEMBLY__
>>  
>> +#define SYM_ALIGN(algn...) .balign algn
>> +
>> +#define SYM_L_GLOBAL(name) .globl name
>> +#define SYM_L_WEAK(name)   .weak name
> 
> Won't this better be added when required?  I can't spot any weak
> symbols in assembly ATM, and you don't introduce any _WEAK macro
> variants below.

Well, Andrew specifically mentioned to desire to also have Linux'es
support for weak symbols. Hence I decided to add it here despite
(for now) being unused). I can certainly drop that again, but in
particular if we wanted to use the scheme globally, I think we may
want to make it "complete".

>> +#define SYM_L_LOCAL(name)  /* nothing */
>> +
>> +#define SYM_T_FUNC         STT_FUNC
>> +#define SYM_T_DATA         STT_OBJECT
>> +#define SYM_T_NONE         STT_NOTYPE
>> +
>> +#define SYM(name, typ, linkage, algn...)          \
>> +        .type name, SYM_T_ ## typ;                \
>> +        SYM_L_ ## linkage(name);                  \
>> +        SYM_ALIGN(algn);                          \
>> +        name:
>> +
>> +#define END(name) .size name, . - name
>> +
>> +#define ARG1_(x, y...) (x)
>> +#define ARG2_(x, y...) ARG1_(y)
>> +
>> +#define LAST__(nr) ARG ## nr ## _
>> +#define LAST_(nr)  LAST__(nr)
>> +#define LAST(x, y...) LAST_(count_args(x, ## y))(x, ## y)
> 
> I find LAST not very descriptive, won't it better be named OPTIONAL()
> or similar? (and maybe placed in lib.h?)

I don't think OPTIONAL describes the purpose. I truly mean "last" here.
As to placing in lib.h - perhaps, but then we may want to have forms
with more than 2 arguments right away (and it would be a little unclear
how far up to go).

>> +
>> +#define FUNC(name, algn...) \
>> +        SYM(name, FUNC, GLOBAL, LAST(16, ## algn), 0x90)
> 
> A rant, should the alignment of functions use a different padding?
> (ie: ret or ud2?) In order to prevent stray jumps falling in the
> padding and fall trough into the next function.  That would also
> prevent the implicit fall trough used in some places.

Yes, but that's a separate topic (for which iirc patches are pending
as well, just of course not integrated with the work here. There's
the slight risk of overlooking some "fall-through" case ...

>> +#define LABEL(name, algn...) \
>> +        SYM(name, NONE, GLOBAL, LAST(16, ## algn), 0x90)
>> +#define DATA(name, algn...) \
>> +        SYM(name, DATA, GLOBAL, LAST(0, ## algn), 0xff)
>> +
>> +#define FUNC_LOCAL(name, algn...) \
>> +        SYM(name, FUNC, LOCAL, LAST(16, ## algn), 0x90)
>> +#define LABEL_LOCAL(name, algn...) \
>> +        SYM(name, NONE, LOCAL, LAST(16, ## algn), 0x90)
> 
> Is there much value in adding local labels to the symbol table?
> 
> AFAICT the main purpose of this macro is to be used to declare aligned
> labels, and here avoid the ALIGN + label name pair, but could likely
> drop the .type directive?

Right, .type ... NOTYPE is kind of redundant, but it fits the model
better here.

>> --- a/xen/arch/x86/x86_64/compat/entry.S
>> +++ b/xen/arch/x86/x86_64/compat/entry.S
>> @@ -8,10 +8,11 @@
>>  #include <asm/page.h>
>>  #include <asm/processor.h>
>>  #include <asm/desc.h>
>> +#include <xen/lib.h>
> 
> Shouldn't the inclusion of lib.h be in asm_defs.h, as that's where the
> usage of count_args() resides? (I assume that's why lib.h is added
> here).

When the uses are in macros I'm always largely undecided, and I slightly
tend towards the (in general, perhaps not overly relevant here) "less
dependencies" solution. As in: Source files not using the macros which
use count_args() also don't need libs.h then.

>> @@ -66,24 +68,21 @@ compat_test_guest_events:
>>          call  compat_create_bounce_frame
>>          jmp   compat_test_all_events
>>  
>> -        ALIGN
>>  /* %rbx: struct vcpu */
>> -compat_process_softirqs:
>> +LABEL_LOCAL(compat_process_softirqs)
> 
> Shouldn't this be a local function rather than a local label?  It's
> fully isolated.  I guess it would create issues with
> compat_process_trap, as we would then require a jump from the
> preceding compat_process_nmi.

Alternatives are possible, but right now I consider this an inner label
of compat_test_all_events.

>>          sti
>>          call  do_softirq
>>          jmp   compat_test_all_events
>>  
>> -        ALIGN
>>  /* %rbx: struct vcpu, %rdx: struct trap_bounce */
>> -.Lcompat_process_trapbounce:
>> +LABEL_LOCAL(.Lcompat_process_trapbounce)
> 
> It's my understanding that here the '.L' prefix is pointless, since
> LABEL_LOCAL() will forcefully create a symbol for the label due to the
> usage of .type?

I don't think .type has this effect. There's certainly no such label in
the symbol table of the object file I have as a result.

Jan

Re: [PATCH v2 1/2] x86: annotate entry points with type and size

[Roger Pau Monné]

On Tue, May 30, 2023 at 10:06:27AM +0200, Jan Beulich wrote:
> On 29.05.2023 15:34, Roger Pau Monné wrote:
> > On Tue, May 23, 2023 at 01:30:51PM +0200, Jan Beulich wrote:
> >> Note that the FB-label in autogen_stubs() cannot be converted just yet:
> >> Such labels cannot be used with .type. We could further diverge from
> >> Linux'es model and avoid setting STT_NOTYPE explicitly (that's the type
> >> labels get by default anyway).
> >>
> >> Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
> >> still have ALIGN.
> > 
> > FWIW, as I'm looking into using the newly added macros in order to add
> > annotations suitable for live-patching, I would need to switch some of
> > the LABEL usages into it's own functions, as it's not possible to
> > livepatch a function that has labels jumped into from code paths
> > outside of the function.
> 
> Hmm, I'm not sure what the best way is to overcome that restriction. I'm
> not convinced we want to arbitrarily name things "functions".

Any external entry point in the middle of a function-like block will
prevent it from being live patched.

If you want I can try to do a pass on top of your patch and see how
that would end up looking.  I'm attempting to think about other
solutions, but every other solution seems quite horrible.

> >> --- a/xen/arch/x86/include/asm/asm_defns.h
> >> +++ b/xen/arch/x86/include/asm/asm_defns.h
> >> @@ -81,6 +81,45 @@ register unsigned long current_stack_poi
> >>  
> >>  #ifdef __ASSEMBLY__
> >>  
> >> +#define SYM_ALIGN(algn...) .balign algn
> >> +
> >> +#define SYM_L_GLOBAL(name) .globl name
> >> +#define SYM_L_WEAK(name)   .weak name
> > 
> > Won't this better be added when required?  I can't spot any weak
> > symbols in assembly ATM, and you don't introduce any _WEAK macro
> > variants below.
> 
> Well, Andrew specifically mentioned to desire to also have Linux'es
> support for weak symbols. Hence I decided to add it here despite
> (for now) being unused). I can certainly drop that again, but in
> particular if we wanted to use the scheme globally, I think we may
> want to make it "complete".

OK, as long as we know it's unused.

> >> +#define SYM_L_LOCAL(name)  /* nothing */
> >> +
> >> +#define SYM_T_FUNC         STT_FUNC
> >> +#define SYM_T_DATA         STT_OBJECT
> >> +#define SYM_T_NONE         STT_NOTYPE
> >> +
> >> +#define SYM(name, typ, linkage, algn...)          \
> >> +        .type name, SYM_T_ ## typ;                \
> >> +        SYM_L_ ## linkage(name);                  \
> >> +        SYM_ALIGN(algn);                          \
> >> +        name:
> >> +
> >> +#define END(name) .size name, . - name
> >> +
> >> +#define ARG1_(x, y...) (x)
> >> +#define ARG2_(x, y...) ARG1_(y)
> >> +
> >> +#define LAST__(nr) ARG ## nr ## _
> >> +#define LAST_(nr)  LAST__(nr)
> >> +#define LAST(x, y...) LAST_(count_args(x, ## y))(x, ## y)
> > 
> > I find LAST not very descriptive, won't it better be named OPTIONAL()
> > or similar? (and maybe placed in lib.h?)
> 
> I don't think OPTIONAL describes the purpose. I truly mean "last" here.
> As to placing in lib.h - perhaps, but then we may want to have forms
> with more than 2 arguments right away (and it would be a little unclear
> how far up to go).

Hm, I would be fine with adding that version with just 2 arguments, as
it's better to have the helper in a generic place IMO.

> >> +
> >> +#define FUNC(name, algn...) \
> >> +        SYM(name, FUNC, GLOBAL, LAST(16, ## algn), 0x90)
> > 
> > A rant, should the alignment of functions use a different padding?
> > (ie: ret or ud2?) In order to prevent stray jumps falling in the
> > padding and fall trough into the next function.  That would also
> > prevent the implicit fall trough used in some places.
> 
> Yes, but that's a separate topic (for which iirc patches are pending
> as well, just of course not integrated with the work here. There's
> the slight risk of overlooking some "fall-through" case ...

Oh, OK, wasn't aware patches are floating for this already, just came
across it while reviewing.

> >> --- a/xen/arch/x86/x86_64/compat/entry.S
> >> +++ b/xen/arch/x86/x86_64/compat/entry.S
> >> @@ -8,10 +8,11 @@
> >>  #include <asm/page.h>
> >>  #include <asm/processor.h>
> >>  #include <asm/desc.h>
> >> +#include <xen/lib.h>
> > 
> > Shouldn't the inclusion of lib.h be in asm_defs.h, as that's where the
> > usage of count_args() resides? (I assume that's why lib.h is added
> > here).
> 
> When the uses are in macros I'm always largely undecided, and I slightly
> tend towards the (in general, perhaps not overly relevant here) "less
> dependencies" solution. As in: Source files not using the macros which
> use count_args() also don't need libs.h then.

I tend to prefer headers to be self contained, as it overall leads to
a clearer set of includes in source files.  It's not obvious why
entry.S needs lib.h unless the asm_macros.h usage is taken into
account.

> >>          sti
> >>          call  do_softirq
> >>          jmp   compat_test_all_events
> >>  
> >> -        ALIGN
> >>  /* %rbx: struct vcpu, %rdx: struct trap_bounce */
> >> -.Lcompat_process_trapbounce:
> >> +LABEL_LOCAL(.Lcompat_process_trapbounce)
> > 
> > It's my understanding that here the '.L' prefix is pointless, since
> > LABEL_LOCAL() will forcefully create a symbol for the label due to the
> > usage of .type?
> 
> I don't think .type has this effect. There's certainly no such label in
> the symbol table of the object file I have as a result.

I was expecting .type to force the creation of a symbol, so the '.L'
prefix does prevent the symbol from being created even if .type is
specified.

Shouldn't the assembler complain that we are attempting to set a type
for a not present symbol?

Thanks, Roger.

Re: [PATCH v2 1/2] x86: annotate entry points with type and size

[Jan Beulich]

On 30.05.2023 15:21, Roger Pau Monné wrote:
> On Tue, May 30, 2023 at 10:06:27AM +0200, Jan Beulich wrote:
>> On 29.05.2023 15:34, Roger Pau Monné wrote:
>>> On Tue, May 23, 2023 at 01:30:51PM +0200, Jan Beulich wrote:
>>>> Note that the FB-label in autogen_stubs() cannot be converted just yet:
>>>> Such labels cannot be used with .type. We could further diverge from
>>>> Linux'es model and avoid setting STT_NOTYPE explicitly (that's the type
>>>> labels get by default anyway).
>>>>
>>>> Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
>>>> still have ALIGN.
>>>
>>> FWIW, as I'm looking into using the newly added macros in order to add
>>> annotations suitable for live-patching, I would need to switch some of
>>> the LABEL usages into it's own functions, as it's not possible to
>>> livepatch a function that has labels jumped into from code paths
>>> outside of the function.
>>
>> Hmm, I'm not sure what the best way is to overcome that restriction. I'm
>> not convinced we want to arbitrarily name things "functions".
> 
> Any external entry point in the middle of a function-like block will
> prevent it from being live patched.

Is there actually any particular reason for this restriction? As long
as old and new code has the same external entry points, redirecting
all old ones to their new counterparts would seem feasible.

> If you want I can try to do a pass on top of your patch and see how
> that would end up looking.  I'm attempting to think about other
> solutions, but every other solution seems quite horrible.

Right, but splitting functions into piecemeal fragments isn't going
to be very nice either.

>>>> --- a/xen/arch/x86/include/asm/asm_defns.h
>>>> +++ b/xen/arch/x86/include/asm/asm_defns.h
>>>> @@ -81,6 +81,45 @@ register unsigned long current_stack_poi
>>>>  
>>>>  #ifdef __ASSEMBLY__
>>>>  
>>>> +#define SYM_ALIGN(algn...) .balign algn
>>>> +
>>>> +#define SYM_L_GLOBAL(name) .globl name
>>>> +#define SYM_L_WEAK(name)   .weak name
>>>
>>> Won't this better be added when required?  I can't spot any weak
>>> symbols in assembly ATM, and you don't introduce any _WEAK macro
>>> variants below.
>>
>> Well, Andrew specifically mentioned to desire to also have Linux'es
>> support for weak symbols. Hence I decided to add it here despite
>> (for now) being unused). I can certainly drop that again, but in
>> particular if we wanted to use the scheme globally, I think we may
>> want to make it "complete".
> 
> OK, as long as we know it's unused.

I've added a sentence to this effect to the description.

>>>> +#define SYM_L_LOCAL(name)  /* nothing */
>>>> +
>>>> +#define SYM_T_FUNC         STT_FUNC
>>>> +#define SYM_T_DATA         STT_OBJECT
>>>> +#define SYM_T_NONE         STT_NOTYPE
>>>> +
>>>> +#define SYM(name, typ, linkage, algn...)          \
>>>> +        .type name, SYM_T_ ## typ;                \
>>>> +        SYM_L_ ## linkage(name);                  \
>>>> +        SYM_ALIGN(algn);                          \
>>>> +        name:
>>>> +
>>>> +#define END(name) .size name, . - name
>>>> +
>>>> +#define ARG1_(x, y...) (x)
>>>> +#define ARG2_(x, y...) ARG1_(y)
>>>> +
>>>> +#define LAST__(nr) ARG ## nr ## _
>>>> +#define LAST_(nr)  LAST__(nr)
>>>> +#define LAST(x, y...) LAST_(count_args(x, ## y))(x, ## y)
>>>
>>> I find LAST not very descriptive, won't it better be named OPTIONAL()
>>> or similar? (and maybe placed in lib.h?)
>>
>> I don't think OPTIONAL describes the purpose. I truly mean "last" here.
>> As to placing in lib.h - perhaps, but then we may want to have forms
>> with more than 2 arguments right away (and it would be a little unclear
>> how far up to go).
> 
> Hm, I would be fine with adding that version with just 2 arguments, as
> it's better to have the helper in a generic place IMO.

I'll think about this some more.

>>>> +
>>>> +#define FUNC(name, algn...) \
>>>> +        SYM(name, FUNC, GLOBAL, LAST(16, ## algn), 0x90)
>>>
>>> A rant, should the alignment of functions use a different padding?
>>> (ie: ret or ud2?) In order to prevent stray jumps falling in the
>>> padding and fall trough into the next function.  That would also
>>> prevent the implicit fall trough used in some places.
>>
>> Yes, but that's a separate topic (for which iirc patches are pending
>> as well, just of course not integrated with the work here. There's
>> the slight risk of overlooking some "fall-through" case ...
> 
> Oh, OK, wasn't aware patches are floating for this already, just came
> across it while reviewing.

Well, those don't cover padding yet, but they deal with straight-line
speculation past RET or JMP.

>>>>          sti
>>>>          call  do_softirq
>>>>          jmp   compat_test_all_events
>>>>  
>>>> -        ALIGN
>>>>  /* %rbx: struct vcpu, %rdx: struct trap_bounce */
>>>> -.Lcompat_process_trapbounce:
>>>> +LABEL_LOCAL(.Lcompat_process_trapbounce)
>>>
>>> It's my understanding that here the '.L' prefix is pointless, since
>>> LABEL_LOCAL() will forcefully create a symbol for the label due to the
>>> usage of .type?
>>
>> I don't think .type has this effect. There's certainly no such label in
>> the symbol table of the object file I have as a result.
> 
> I was expecting .type to force the creation of a symbol, so the '.L'
> prefix does prevent the symbol from being created even if .type is
> specified.
> 
> Shouldn't the assembler complain that we are attempting to set a type
> for a not present symbol?

But .L symbols are still normal symbols to gas, just that it knows to not
emit them to the symbol table (unless there's a need, e.g. through a use
in a relocation that cannot be expressed as section-relative one). It
could flag the pointless use, but then it may get this wrong if in the
end the symbol does need emitting.

Jan

Re: [PATCH v2 1/2] x86: annotate entry points with type and size

[Roger Pau Monné]

On Tue, May 30, 2023 at 04:23:21PM +0200, Jan Beulich wrote:
> On 30.05.2023 15:21, Roger Pau Monné wrote:
> > On Tue, May 30, 2023 at 10:06:27AM +0200, Jan Beulich wrote:
> >> On 29.05.2023 15:34, Roger Pau Monné wrote:
> >>> On Tue, May 23, 2023 at 01:30:51PM +0200, Jan Beulich wrote:
> >>>> Note that the FB-label in autogen_stubs() cannot be converted just yet:
> >>>> Such labels cannot be used with .type. We could further diverge from
> >>>> Linux'es model and avoid setting STT_NOTYPE explicitly (that's the type
> >>>> labels get by default anyway).
> >>>>
> >>>> Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
> >>>> still have ALIGN.
> >>>
> >>> FWIW, as I'm looking into using the newly added macros in order to add
> >>> annotations suitable for live-patching, I would need to switch some of
> >>> the LABEL usages into it's own functions, as it's not possible to
> >>> livepatch a function that has labels jumped into from code paths
> >>> outside of the function.
> >>
> >> Hmm, I'm not sure what the best way is to overcome that restriction. I'm
> >> not convinced we want to arbitrarily name things "functions".
> > 
> > Any external entry point in the middle of a function-like block will
> > prevent it from being live patched.
> 
> Is there actually any particular reason for this restriction? As long
> as old and new code has the same external entry points, redirecting
> all old ones to their new counterparts would seem feasible.

Yes, that was another option, we could force asm patching to always be
done with a jump (instead of in-place) and then add jumps at the old
entry point addresses in order to redirect to the new addresses.

Or assert that the addresses of any symbols inside the function is not
changed in order to do in-place replacement of code.

> > If you want I can try to do a pass on top of your patch and see how
> > that would end up looking.  I'm attempting to think about other
> > solutions, but every other solution seems quite horrible.
> 
> Right, but splitting functions into piecemeal fragments isn't going
> to be very nice either.

I'm not sure how much splitting would be required TBH.

> >>>> +
> >>>> +#define FUNC(name, algn...) \
> >>>> +        SYM(name, FUNC, GLOBAL, LAST(16, ## algn), 0x90)
> >>>
> >>> A rant, should the alignment of functions use a different padding?
> >>> (ie: ret or ud2?) In order to prevent stray jumps falling in the
> >>> padding and fall trough into the next function.  That would also
> >>> prevent the implicit fall trough used in some places.
> >>
> >> Yes, but that's a separate topic (for which iirc patches are pending
> >> as well, just of course not integrated with the work here. There's
> >> the slight risk of overlooking some "fall-through" case ...
> > 
> > Oh, OK, wasn't aware patches are floating for this already, just came
> > across it while reviewing.
> 
> Well, those don't cover padding yet, but they deal with straight-line
> speculation past RET or JMP.

Introducing the helpers does make it easy to convert the padding for
all the existing users at least.

> >>>>          sti
> >>>>          call  do_softirq
> >>>>          jmp   compat_test_all_events
> >>>>  
> >>>> -        ALIGN
> >>>>  /* %rbx: struct vcpu, %rdx: struct trap_bounce */
> >>>> -.Lcompat_process_trapbounce:
> >>>> +LABEL_LOCAL(.Lcompat_process_trapbounce)
> >>>
> >>> It's my understanding that here the '.L' prefix is pointless, since
> >>> LABEL_LOCAL() will forcefully create a symbol for the label due to the
> >>> usage of .type?
> >>
> >> I don't think .type has this effect. There's certainly no such label in
> >> the symbol table of the object file I have as a result.
> > 
> > I was expecting .type to force the creation of a symbol, so the '.L'
> > prefix does prevent the symbol from being created even if .type is
> > specified.
> > 
> > Shouldn't the assembler complain that we are attempting to set a type
> > for a not present symbol?
> 
> But .L symbols are still normal symbols to gas, just that it knows to not
> emit them to the symbol table (unless there's a need, e.g. through a use
> in a relocation that cannot be expressed as section-relative one). It
> could flag the pointless use, but then it may get this wrong if in the
> end the symbol does need emitting.

Thanks for the explanation.

Roger.

[PATCH v3 0/8] annotate entry points with type and size

[Jan Beulich]

The model introduced in patch 2 is now arch-agnostic, and all arch-es
are being switched at least partly (to at least give examples of how
things will look like).

1: common: move a few macros out of xen/lib.h
2: common: assembly entry point type/size annotations
3: x86: annotate entry points with type and size
4: x86: also mark assembler globals hidden
5: Arm: annotate entry points with type and size
6: RISC-V: annotate entry points with type and size
7: PPC: switch entry point annotations to common model
8: tools/binfile: switch to common annotations model

Jan

[PATCH v3 1/8] common: move a few macros out of xen/lib.h

[Jan Beulich]

Introduce xen/macros.h for this purpose. For now xen/lib.h simply
includes xen/macro.h, until consumers can be suitable cleaned up.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v3: New.

--- a/xen/include/xen/lib.h
+++ b/xen/include/xen/lib.h
@@ -1,26 +1,7 @@
 #ifndef __LIB_H__
 #define __LIB_H__
 
-#define ROUNDUP(x, a) (((x) + (a) - 1) & ~((a) - 1))
-
-#define IS_ALIGNED(val, align) (!((val) & ((align) - 1)))
-
-#define DIV_ROUND(n, d) (((n) + (d) / 2) / (d))
-#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
-
-#define MASK_EXTR(v, m) (((v) & (m)) / ((m) & -(m)))
-#define MASK_INSR(v, m) (((v) * ((m) & -(m))) & (m))
-
-#define count_args_(dot, a1, a2, a3, a4, a5, a6, a7, a8, x, ...) x
-#define count_args(args...) \
-    count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
-
-/* Indirect macros required for expanded argument pasting. */
-#define PASTE_(a, b) a ## b
-#define PASTE(a, b) PASTE_(a, b)
-
-#define __STR(...) #__VA_ARGS__
-#define STR(...) __STR(__VA_ARGS__)
+#include <xen/macros.h>
 
 #ifndef __ASSEMBLY__
 
--- /dev/null
+++ b/xen/include/xen/macros.h
@@ -0,0 +1,34 @@
+#ifndef __MACROS_H__
+#define __MACROS_H__
+
+#define ROUNDUP(x, a) (((x) + (a) - 1) & ~((a) - 1))
+
+#define IS_ALIGNED(val, align) (!((val) & ((align) - 1)))
+
+#define DIV_ROUND(n, d) (((n) + (d) / 2) / (d))
+#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
+
+#define MASK_EXTR(v, m) (((v) & (m)) / ((m) & -(m)))
+#define MASK_INSR(v, m) (((v) * ((m) & -(m))) & (m))
+
+#define count_args_(dot, a1, a2, a3, a4, a5, a6, a7, a8, x, ...) x
+#define count_args(args...) \
+    count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
+
+/* Indirect macros required for expanded argument pasting. */
+#define PASTE_(a, b) a ## b
+#define PASTE(a, b) PASTE_(a, b)
+
+#define __STR(...) #__VA_ARGS__
+#define STR(...) __STR(__VA_ARGS__)
+
+#endif /* __MACROS_H__ */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */

[PATCH v3 2/8] common: assembly entry point type/size annotations

[Jan Beulich]

Recent gas versions generate minimalistic Dwarf debug info for items
annotated as functions and having their sizes specified [1]. Furthermore
generating live patches wants items properly annotated. "Borrow" Arm's
END() and (remotely) derive other annotation infrastructure from
Linux'es, for all architectures to use.

Signed-off-by: Jan Beulich <jbeulich@suse.com>

[1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
---
v3: New, generalized from earlier x86-only version. LAST() (now
    LASTARG()) moved to macros.h.
---
TBD: What to set CODE_ALIGN to by default? Or should we requires arch-es
     to define that in all cases?

TBD: {CODE,DATA}_ALIGN are byte granular, such that a value of 0 can be
     specified (in case this has some special meaning on an arch;
     conceivably it could mean to use some kind of arch default). We may
     not strictly need that, and hence we could also make these power-of
     -2 values (using .p2align).

Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
still have ALIGN.

Note further that FUNC()'s etc "algn" parameter is intended to allow for
only no or a single argument. If we wanted to also make the fill value
customizable per call site, the constructs would need re-doing to some
degree.

--- /dev/null
+++ b/xen/include/xen/linkage.h
@@ -0,0 +1,56 @@
+#ifndef __LINKAGE_H__
+#define __LINKAGE_H__
+
+#ifdef __ASSEMBLY__
+
+#include <xen/macros.h>
+
+#ifndef CODE_ALIGN
+# define CODE_ALIGN ??
+#endif
+#ifndef CODE_FILL
+# define CODE_FILL ~0
+#endif
+
+#ifndef DATA_ALIGN
+# define DATA_ALIGN 0
+#endif
+#ifndef DATA_FILL
+# define DATA_FILL ~0
+#endif
+
+#define SYM_ALIGN(algn...) .balign algn
+
+#define SYM_L_GLOBAL(name) .globl name
+#define SYM_L_WEAK(name)   .weak name
+#define SYM_L_LOCAL(name)  /* nothing */
+
+#define SYM_T_FUNC         STT_FUNC
+#define SYM_T_DATA         STT_OBJECT
+#define SYM_T_NONE         STT_NOTYPE
+
+#define SYM(name, typ, linkage, algn...)          \
+        .type name, SYM_T_ ## typ;                \
+        SYM_L_ ## linkage(name);                  \
+        SYM_ALIGN(algn);                          \
+        name:
+
+#define END(name) .size name, . - name
+
+#define FUNC(name, algn...) \
+        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+#define LABEL(name, algn...) \
+        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+#define DATA(name, algn...) \
+        SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
+
+#define FUNC_LOCAL(name, algn...) \
+        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+#define LABEL_LOCAL(name, algn...) \
+        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+#define DATA_LOCAL(name, algn...) \
+        SYM(name, DATA, LOCAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
+
+#endif /*  __ASSEMBLY__ */
+
+#endif /* __LINKAGE_H__ */
--- a/xen/include/xen/macros.h
+++ b/xen/include/xen/macros.h
@@ -15,6 +15,15 @@
 #define count_args(args...) \
     count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
 
+#define ARG1_(x, y...) (x)
+#define ARG2_(x, y...) ARG1_(y)
+#define ARG3_(x, y...) ARG2_(y)
+#define ARG4_(x, y...) ARG3_(y)
+
+#define ARG__(nr) ARG ## nr ## _
+#define ARG_(nr)  ARG__(nr)
+#define LASTARG(x, y...) ARG_(count_args(x, ## y))(x, ## y)
+
 /* Indirect macros required for expanded argument pasting. */
 #define PASTE_(a, b) a ## b
 #define PASTE(a, b) PASTE_(a, b)

[PATCH v3 3/8] x86: annotate entry points with type and size

[Jan Beulich]

Use the generic framework in xen/linkage.h.

For switch_to_kernel() and restore_all_guest() so far implicit alignment
(from being first in their respective sections) is being made explicit
(as in: using FUNC() without 2nd argument). Whereas for
{,compat}create_bounce_frame() and autogen_entrypoints[] alignment is
newly arranged for.

Except for the added/adjusted alignment padding (including their
knock-on effects) no change in generated code/data. Note that the basis
for support of weak definitions is added despite them not having any use
right now.

Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
use site wants the symbol global anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v3: !PV variant of ret_from_intr is local. Introduction of macros split
    off to separate patch. Also adjust ASM_INT(). Re-base.
v2: Full rework.
---
Only two of the assembly files are being converted for now. More could
be done right here or as follow-on in separate patches.

Note that the FB-label in autogen_stubs() cannot be converted just yet:
Such labels cannot be used with .type. We could further diverge from
Linux'es model and avoid setting STT_NOTYPE explicitly (that's the type
labels get by default anyway).

The ASM_INT() redundancy of .global will be eliminated by a subsequent
patch.

I didn't think that I should make CODE_FILL evaluate to 0xCC right here;
IMO that wants to be a separate patch.

--- a/xen/arch/x86/include/asm/asm_defns.h
+++ b/xen/arch/x86/include/asm/asm_defns.h
@@ -13,6 +13,7 @@
 #include <asm/alternative.h>
 
 #ifdef __ASSEMBLY__
+#include <xen/linkage.h>
 #include <asm/asm-defns.h>
 #ifndef CONFIG_INDIRECT_THUNK
 .equ CONFIG_INDIRECT_THUNK, 0
@@ -343,10 +344,7 @@ static always_inline void stac(void)
     .popsection
 
 #define ASM_INT(label, val)                 \
-    .p2align 2;                             \
-label: .long (val);                         \
-    .size label, . - label;                 \
-    .type label, @object
+    DATA(label, 4) .long (val); END(label)
 
 #define ASM_CONSTANT(name, value)                \
     asm ( ".equ " #name ", %P0; .global " #name  \
--- a/xen/arch/x86/include/asm/config.h
+++ b/xen/arch/x86/include/asm/config.h
@@ -43,7 +43,9 @@
 
 /* Linkage for x86 */
 #ifdef __ASSEMBLY__
-#define ALIGN .align 16,0x90
+#define CODE_ALIGN 16
+#define CODE_FILL 0x90
+#define ALIGN .align CODE_ALIGN, CODE_FILL
 #define ENTRY(name)                             \
   .globl name;                                  \
   ALIGN;                                        \
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -11,7 +11,7 @@
 #include <public/xen.h>
 #include <irq_vectors.h>
 
-ENTRY(entry_int82)
+FUNC(entry_int82)
         ENDBR64
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $0
@@ -27,9 +27,10 @@ ENTRY(entry_int82)
 
         mov   %rsp, %rdi
         call  do_entry_int82
+END(entry_int82)
 
 /* %rbx: struct vcpu */
-ENTRY(compat_test_all_events)
+FUNC(compat_test_all_events)
         ASSERT_NOT_IN_ATOMIC
         cli                             # tests must not race interrupts
 /*compat_test_softirqs:*/
@@ -66,24 +67,21 @@ compat_test_guest_events:
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-compat_process_softirqs:
+LABEL_LOCAL(compat_process_softirqs)
         sti
         call  do_softirq
         jmp   compat_test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu, %rdx: struct trap_bounce */
-.Lcompat_process_trapbounce:
+LABEL_LOCAL(.Lcompat_process_trapbounce)
         sti
 .Lcompat_bounce_exception:
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
 
-	ALIGN
 /* %rbx: struct vcpu */
-compat_process_mce:
+LABEL_LOCAL(compat_process_mce)
         testb $1 << VCPU_TRAP_MCE,VCPU_async_exception_mask(%rbx)
         jnz   .Lcompat_test_guest_nmi
         sti
@@ -97,9 +95,8 @@ compat_process_mce:
         movb %dl,VCPU_async_exception_mask(%rbx)
         jmp   compat_process_trap
 
-	ALIGN
 /* %rbx: struct vcpu */
-compat_process_nmi:
+LABEL_LOCAL(compat_process_nmi)
         testb $1 << VCPU_TRAP_NMI,VCPU_async_exception_mask(%rbx)
         jnz   compat_test_guest_events
         sti
@@ -116,9 +113,10 @@ compat_process_trap:
         leaq  VCPU_trap_bounce(%rbx),%rdx
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_test_all_events)
 
 /* %rbx: struct vcpu, interrupts disabled */
-ENTRY(compat_restore_all_guest)
+FUNC(compat_restore_all_guest)
         ASSERT_INTERRUPTS_DISABLED
         mov   $~(X86_EFLAGS_IOPL | X86_EFLAGS_VM), %r11d
         and   UREGS_eflags(%rsp),%r11d
@@ -161,9 +159,10 @@ ENTRY(compat_restore_all_guest)
         RESTORE_ALL adj=8 compat=1
 .Lft0:  iretq
         _ASM_PRE_EXTABLE(.Lft0, handle_exception)
+END(compat_restore_all_guest)
 
 /* This mustn't modify registers other than %rax. */
-ENTRY(cr4_pv32_restore)
+FUNC(cr4_pv32_restore)
         push  %rdx
         GET_CPUINFO_FIELD(cr4, dx)
         mov   (%rdx), %rax
@@ -193,8 +192,9 @@ ENTRY(cr4_pv32_restore)
         pop   %rdx
         xor   %eax, %eax
         ret
+END(cr4_pv32_restore)
 
-ENTRY(compat_syscall)
+FUNC(compat_syscall)
         /* Fix up reported %cs/%ss for compat domains. */
         movl  $FLAT_COMPAT_USER_SS, UREGS_ss(%rsp)
         movl  $FLAT_COMPAT_USER_CS, UREGS_cs(%rsp)
@@ -222,8 +222,9 @@ UNLIKELY_END(compat_syscall_gpf)
         movw  %si,TRAPBOUNCE_cs(%rdx)
         movb  %cl,TRAPBOUNCE_flags(%rdx)
         jmp   .Lcompat_bounce_exception
+END(compat_syscall)
 
-ENTRY(compat_sysenter)
+FUNC(compat_sysenter)
         CR4_PV32_RESTORE
         movq  VCPU_trap_ctxt(%rbx),%rcx
         cmpb  $X86_EXC_GP, UREGS_entry_vector(%rsp)
@@ -236,17 +237,19 @@ ENTRY(compat_sysenter)
         movw  %ax,TRAPBOUNCE_cs(%rdx)
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_sysenter)
 
-ENTRY(compat_int80_direct_trap)
+FUNC(compat_int80_direct_trap)
         CR4_PV32_RESTORE
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_int80_direct_trap)
 
 /* CREATE A BASIC EXCEPTION FRAME ON GUEST OS (RING-1) STACK:            */
 /*   {[ERRCODE,] EIP, CS, EFLAGS, [ESP, SS]}                             */
 /* %rdx: trap_bounce, %rbx: struct vcpu                                  */
 /* On return only %rbx and %rdx are guaranteed non-clobbered.            */
-compat_create_bounce_frame:
+FUNC_LOCAL(compat_create_bounce_frame)
         ASSERT_INTERRUPTS_ENABLED
         mov   %fs,%edi
         ALTERNATIVE "", stac, X86_FEATURE_XEN_SMAP
@@ -352,3 +355,4 @@ compat_crash_page_fault:
         jmp   .Lft14
 .previous
         _ASM_EXTABLE(.Lft14, .Lfx14)
+END(compat_create_bounce_frame)
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -24,7 +24,7 @@
 
 #ifdef CONFIG_PV
 /* %rbx: struct vcpu */
-switch_to_kernel:
+FUNC_LOCAL(switch_to_kernel)
         leaq  VCPU_trap_bounce(%rbx),%rdx
 
         /* TB_eip = 32-bit syscall ? syscall32_addr : syscall_addr */
@@ -89,24 +89,21 @@ test_guest_events:
         call  create_bounce_frame
         jmp   test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_softirqs:
+LABEL_LOCAL(process_softirqs)
         sti
         call do_softirq
         jmp  test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu, %rdx struct trap_bounce */
-.Lprocess_trapbounce:
+LABEL_LOCAL(.Lprocess_trapbounce)
         sti
 .Lbounce_exception:
         call  create_bounce_frame
         jmp   test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_mce:
+LABEL_LOCAL(process_mce)
         testb $1 << VCPU_TRAP_MCE, VCPU_async_exception_mask(%rbx)
         jnz  .Ltest_guest_nmi
         sti
@@ -120,9 +117,8 @@ process_mce:
         movb %dl, VCPU_async_exception_mask(%rbx)
         jmp  process_trap
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_nmi:
+LABEL_LOCAL(process_nmi)
         testb $1 << VCPU_TRAP_NMI, VCPU_async_exception_mask(%rbx)
         jnz  test_guest_events
         sti
@@ -139,11 +135,12 @@ process_trap:
         leaq VCPU_trap_bounce(%rbx), %rdx
         call create_bounce_frame
         jmp  test_all_events
+END(switch_to_kernel)
 
         .section .text.entry, "ax", @progbits
 
 /* %rbx: struct vcpu, interrupts disabled */
-restore_all_guest:
+FUNC_LOCAL(restore_all_guest)
         ASSERT_INTERRUPTS_DISABLED
 
         /* Stash guest SPEC_CTRL value while we can read struct vcpu. */
@@ -220,8 +217,7 @@ restore_all_guest:
         sysretq
 1:      sysretl
 
-        ALIGN
-.Lrestore_rcx_iret_exit_to_guest:
+LABEL_LOCAL(.Lrestore_rcx_iret_exit_to_guest)
         movq  8(%rsp), %rcx           # RIP
 /* No special register assumptions. */
 iret_exit_to_guest:
@@ -230,6 +226,7 @@ iret_exit_to_guest:
         addq  $8,%rsp
 .Lft0:  iretq
         _ASM_PRE_EXTABLE(.Lft0, handle_exception)
+END(restore_all_guest)
 
 /*
  * When entering SYSCALL from kernel mode:
@@ -246,7 +243,7 @@ iret_exit_to_guest:
  *  - Guest %rsp stored in %rax
  *  - Xen stack loaded, pointing at the %ss slot
  */
-ENTRY(lstar_enter)
+FUNC(lstar_enter)
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
 #endif
@@ -281,9 +278,10 @@ ENTRY(lstar_enter)
         mov   %rsp, %rdi
         call  pv_hypercall
         jmp   test_all_events
+END(lstar_enter)
 
 /* See lstar_enter for entry register state. */
-ENTRY(cstar_enter)
+FUNC(cstar_enter)
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
 #endif
@@ -321,8 +319,9 @@ ENTRY(cstar_enter)
         jne   compat_syscall
 #endif
         jmp   switch_to_kernel
+END(cstar_enter)
 
-ENTRY(sysenter_entry)
+FUNC(sysenter_entry)
         ENDBR64
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
@@ -331,7 +330,7 @@ ENTRY(sysenter_entry)
         pushq $FLAT_USER_SS
         pushq $0
         pushfq
-GLOBAL(sysenter_eflags_saved)
+LABEL(sysenter_eflags_saved, 0)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $3 /* ring 3 null cs */
         pushq $0 /* null rip */
@@ -385,8 +384,9 @@ UNLIKELY_END(sysenter_gpf)
         jne   compat_sysenter
 #endif
         jmp   .Lbounce_exception
+END(sysenter_entry)
 
-ENTRY(int80_direct_trap)
+FUNC(int80_direct_trap)
         ENDBR64
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $0
@@ -474,6 +474,7 @@ int80_slow_path:
          */
         GET_STACK_END(14)
         jmp   handle_exception_saved
+END(int80_direct_trap)
 
         /* create_bounce_frame & helpers don't need to be in .text.entry */
         .text
@@ -482,7 +483,7 @@ int80_slow_path:
 /*   { RCX, R11, [ERRCODE,] RIP, CS, RFLAGS, RSP, SS }                   */
 /* %rdx: trap_bounce, %rbx: struct vcpu                                  */
 /* On return only %rbx and %rdx are guaranteed non-clobbered.            */
-create_bounce_frame:
+FUNC_LOCAL(create_bounce_frame)
         ASSERT_INTERRUPTS_ENABLED
         testb $TF_kernel_mode,VCPU_thread_flags(%rbx)
         jnz   1f
@@ -618,6 +619,7 @@ ENTRY(dom_crash_sync_extable)
         xorl  %edi,%edi
         jmp   asm_domain_crash_synchronous /* Does not return */
         .popsection
+END(create_bounce_frame)
 #endif /* CONFIG_PV */
 
 /* --- CODE BELOW THIS LINE (MOSTLY) NOT GUEST RELATED --- */
@@ -626,7 +628,7 @@ ENTRY(dom_crash_sync_extable)
 
 /* No special register assumptions. */
 #ifdef CONFIG_PV
-ENTRY(continue_pv_domain)
+FUNC(continue_pv_domain)
         ENDBR64
         call  check_wakeup_from_wait
 ret_from_intr:
@@ -641,26 +643,28 @@ ret_from_intr:
 #else
         jmp   test_all_events
 #endif
+END(continue_pv_domain)
 #else
-ret_from_intr:
+FUNC_LOCAL(ret_from_intr, 0)
         ASSERT_CONTEXT_IS_XEN
         jmp   restore_all_xen
+END(ret_from_intr)
 #endif
 
         .section .init.text, "ax", @progbits
-ENTRY(early_page_fault)
+FUNC(early_page_fault)
         ENDBR64
         movl  $X86_EXC_PF, 4(%rsp)
         SAVE_ALL
         movq  %rsp, %rdi
         call  do_early_page_fault
         jmp   restore_all_xen
+END(early_page_fault)
 
         .section .text.entry, "ax", @progbits
 
-        ALIGN
 /* No special register assumptions. */
-restore_all_xen:
+FUNC_LOCAL(restore_all_xen)
         /*
          * Check whether we need to switch to the per-CPU page tables, in
          * case we return to late PV exit code (from an NMI or #MC).
@@ -677,8 +681,9 @@ UNLIKELY_END(exit_cr3)
 
         RESTORE_ALL adj=8
         iretq
+END(restore_all_xen)
 
-ENTRY(common_interrupt)
+FUNC(common_interrupt)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
 
@@ -707,12 +712,14 @@ ENTRY(common_interrupt)
         mov   %r15, STACK_CPUINFO_FIELD(xen_cr3)(%r14)
         mov   %bl, STACK_CPUINFO_FIELD(use_pv_cr3)(%r14)
         jmp ret_from_intr
+END(common_interrupt)
 
-ENTRY(page_fault)
+FUNC(page_fault)
         ENDBR64
         movl  $X86_EXC_PF, 4(%rsp)
+END(page_fault)
 /* No special register assumptions. */
-GLOBAL(handle_exception)
+FUNC(handle_exception, 0)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
 
@@ -880,92 +887,108 @@ FATAL_exception_with_ints_disabled:
         xorl  %esi,%esi
         movq  %rsp,%rdi
         tailcall fatal_trap
+END(handle_exception)
 
-ENTRY(divide_error)
+FUNC(divide_error)
         ENDBR64
         pushq $0
         movl  $X86_EXC_DE, 4(%rsp)
         jmp   handle_exception
+END(divide_error)
 
-ENTRY(coprocessor_error)
+FUNC(coprocessor_error)
         ENDBR64
         pushq $0
         movl  $X86_EXC_MF, 4(%rsp)
         jmp   handle_exception
+END(coprocessor_error)
 
-ENTRY(simd_coprocessor_error)
+FUNC(simd_coprocessor_error)
         ENDBR64
         pushq $0
         movl  $X86_EXC_XM, 4(%rsp)
         jmp   handle_exception
+END(coprocessor_error)
 
-ENTRY(device_not_available)
+FUNC(device_not_available)
         ENDBR64
         pushq $0
         movl  $X86_EXC_NM, 4(%rsp)
         jmp   handle_exception
+END(device_not_available)
 
-ENTRY(debug)
+FUNC(debug)
         ENDBR64
         pushq $0
         movl  $X86_EXC_DB, 4(%rsp)
         jmp   handle_ist_exception
+END(debug)
 
-ENTRY(int3)
+FUNC(int3)
         ENDBR64
         pushq $0
         movl  $X86_EXC_BP, 4(%rsp)
         jmp   handle_exception
+END(int3)
 
-ENTRY(overflow)
+FUNC(overflow)
         ENDBR64
         pushq $0
         movl  $X86_EXC_OF, 4(%rsp)
         jmp   handle_exception
+END(overflow)
 
-ENTRY(bounds)
+FUNC(bounds)
         ENDBR64
         pushq $0
         movl  $X86_EXC_BR, 4(%rsp)
         jmp   handle_exception
+END(bounds)
 
-ENTRY(invalid_op)
+FUNC(invalid_op)
         ENDBR64
         pushq $0
         movl  $X86_EXC_UD, 4(%rsp)
         jmp   handle_exception
+END(invalid_op)
 
-ENTRY(invalid_TSS)
+FUNC(invalid_TSS)
         ENDBR64
         movl  $X86_EXC_TS, 4(%rsp)
         jmp   handle_exception
+END(invalid_TSS)
 
-ENTRY(segment_not_present)
+FUNC(segment_not_present)
         ENDBR64
         movl  $X86_EXC_NP, 4(%rsp)
         jmp   handle_exception
+END(segment_not_present)
 
-ENTRY(stack_segment)
+FUNC(stack_segment)
         ENDBR64
         movl  $X86_EXC_SS, 4(%rsp)
         jmp   handle_exception
+END(stack_segment)
 
-ENTRY(general_protection)
+FUNC(general_protection)
         ENDBR64
         movl  $X86_EXC_GP, 4(%rsp)
         jmp   handle_exception
+END(general_protection)
 
-ENTRY(alignment_check)
+FUNC(alignment_check)
         ENDBR64
         movl  $X86_EXC_AC, 4(%rsp)
         jmp   handle_exception
+END(alignment_check)
 
-ENTRY(entry_CP)
+FUNC(entry_CP)
         ENDBR64
         movl  $X86_EXC_CP, 4(%rsp)
         jmp   handle_exception
+END(entry_CP)
 
-ENTRY(double_fault)
+FUNC(double_fault)
         ENDBR64
         movl  $X86_EXC_DF, 4(%rsp)
         /* Set AC to reduce chance of further SMAP faults */
@@ -988,8 +1011,9 @@ ENTRY(double_fault)
 
         movq  %rsp,%rdi
         tailcall do_double_fault
+END(double_fault)
 
-ENTRY(nmi)
+FUNC(nmi)
         ENDBR64
         pushq $0
         movl  $X86_EXC_NMI, 4(%rsp)
@@ -1116,21 +1140,24 @@ handle_ist_exception:
         ASSERT_CONTEXT_IS_XEN
         jmp   restore_all_xen
 #endif
+END(nmi)
 
-ENTRY(machine_check)
+FUNC(machine_check)
         ENDBR64
         pushq $0
         movl  $X86_EXC_MC, 4(%rsp)
         jmp   handle_ist_exception
+END(machine_check)
 
 /* No op trap handler.  Required for kexec crash path. */
-GLOBAL(trap_nop)
+FUNC(trap_nop, 0)
         ENDBR64
         iretq
+END(trap_nop)
 
 /* Table of automatically generated entry points.  One per vector. */
         .pushsection .init.rodata, "a", @progbits
-GLOBAL(autogen_entrypoints)
+DATA(autogen_entrypoints, 8)
         /* pop into the .init.rodata section and record an entry point. */
         .macro entrypoint ent
         .pushsection .init.rodata, "a", @progbits
@@ -1139,7 +1166,7 @@ GLOBAL(autogen_entrypoints)
         .endm
 
         .popsection
-autogen_stubs: /* Automatically generated stubs. */
+FUNC_LOCAL(autogen_stubs, 0) /* Automatically generated stubs. */
 
         vec = 0
         .rept X86_NR_VECTORS
@@ -1183,6 +1210,7 @@ autogen_stubs: /* Automatically generate
 
         vec = vec + 1
         .endr
+END(autogen_stubs)
 
         .section .init.rodata, "a", @progbits
-        .size autogen_entrypoints, . - autogen_entrypoints
+END(autogen_entrypoints)

[PATCH v3 4/8] x86: also mark assembler globals hidden

[Jan Beulich]

Let's have assembler symbols be consistent with C ones. In principle
there are (a few) cases where gas can produce smaller code this way,
just that for now there's a gas bug causing smaller code to be emitted
even when that shouldn't be the case.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
---
v3: Re-base over generalization of the annotations.
v2: New.

--- a/xen/arch/x86/include/asm/config.h
+++ b/xen/arch/x86/include/asm/config.h
@@ -47,11 +47,11 @@
 #define CODE_FILL 0x90
 #define ALIGN .align CODE_ALIGN, CODE_FILL
 #define ENTRY(name)                             \
-  .globl name;                                  \
   ALIGN;                                        \
-  name:
+  GLOBAL(name)
 #define GLOBAL(name)                            \
   .globl name;                                  \
+  .hidden name;                                 \
   name:
 #endif
 
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -21,7 +21,7 @@
 
 #define SYM_ALIGN(algn...) .balign algn
 
-#define SYM_L_GLOBAL(name) .globl name
+#define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
 

[PATCH v3 5/8] Arm: annotate entry points with type and size

[Jan Beulich]

Use the generic framework in xen/linkage.h. No change in generated code
except for the changed padding value (noticable when config.gz isn't a
multiple of 4 in size). Plus of course the converted symbols change to
be hidden ones.

Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
use site wants the symbol global anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
Only one each of the assembly files is being converted for now. More
could be done right here or as follow-on in separate patches.

The ASM_INT() redundancy of .global will be eliminated by a subsequent
patch.
---
v3: New.

--- a/xen/arch/arm/arm32/lib/div64.S
+++ b/xen/arch/arm/arm32/lib/div64.S
@@ -42,7 +42,7 @@
  * Clobbered regs: xl, ip
  */
 
-ENTRY(__do_div64)
+FUNC(__do_div64)
 UNWIND(.fnstart)
 
 	@ Test for easy paths first.
@@ -206,4 +206,4 @@ Ldiv0_64:
 	ldr	pc, [sp], #8
 
 UNWIND(.fnend)
-ENDPROC(__do_div64)
+END(__do_div64)
--- a/xen/arch/arm/arm64/lib/clear_page.S
+++ b/xen/arch/arm/arm64/lib/clear_page.S
@@ -22,7 +22,7 @@
  * Parameters:
  *	x0 - dest
  */
-ENTRY(clear_page)
+FUNC(clear_page)
 	mrs	x1, dczid_el0
 	and	w1, w1, #0xf
 	mov	x2, #4
@@ -33,4 +33,4 @@ ENTRY(clear_page)
 	tst	x0, #(PAGE_SIZE - 1)
 	b.ne	1b
 	ret
-ENDPROC(clear_page)
+END(clear_page)
--- a/xen/arch/arm/include/asm/asm_defns.h
+++ b/xen/arch/arm/include/asm/asm_defns.h
@@ -5,6 +5,7 @@
 /* NB. Auto-generated from arch/.../asm-offsets.c */
 #include <asm/asm-offsets.h>
 #endif
+#include <xen/linkage.h>
 #include <asm/processor.h>
 
 /* Macros for generic assembly code */
@@ -28,10 +29,7 @@ label:  .asciz msg;
 .popsection
 
 #define ASM_INT(label, val)                 \
-    .p2align 2;                             \
-label: .long (val);                         \
-    .size label, . - label;                 \
-    .type label, %object
+    DATA(label, 4) .long (val); END(label)
 
 #endif /* __ARM_ASM_DEFNS_H__ */
 /*
--- a/xen/arch/arm/include/asm/config.h
+++ b/xen/arch/arm/include/asm/config.h
@@ -53,7 +53,8 @@
 
 /* Linkage for ARM */
 #ifdef __ASSEMBLY__
-#define ALIGN .align 2
+#define CODE_ALIGN 4
+#define ALIGN .balign CODE_ALIGN
 #define ENTRY(name)                             \
   .globl name;                                  \
   ALIGN;                                        \
@@ -61,8 +62,6 @@
 #define GLOBAL(name)                            \
   .globl name;                                  \
   name:
-#define END(name) \
-  .size name, .-name
 #define ENDPROC(name) \
   .type name, %function; \
   END(name)

[PATCH v3 6/8] RISC-V: annotate entry points with type and size

[Jan Beulich]

Use the generic framework in xen/linkage.h. No change in generated code
except of course the converted symbols change to be hidden ones and gain
a valid size.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
Probably count_args_exp() should move to macros.h, but I first wanted to
see whether anyone can suggest any better approach for checking whether
a defined macro expands to nothing.
---
v3: New.

--- a/xen/arch/riscv/entry.S
+++ b/xen/arch/riscv/entry.S
@@ -5,7 +5,7 @@
 #include <asm/traps.h>
 
 /* WIP: only works while interrupting Xen context */
-ENTRY(handle_trap)
+FUNC(handle_trap)
 
     /* Exceptions from xen */
 save_to_stack:
@@ -92,3 +92,4 @@ restore_registers:
         REG_L   sp, CPU_USER_REGS_SP(sp)
 
         sret
+END(handle_trap)
--- a/xen/arch/riscv/include/asm/asm.h
+++ b/xen/arch/riscv/include/asm/asm.h
@@ -7,6 +7,7 @@
 #define _ASM_RISCV_ASM_H
 
 #ifdef __ASSEMBLY__
+#include <xen/linkage.h>
 #define __ASM_STR(x)	x
 #else
 #define __ASM_STR(x)	#x
--- a/xen/arch/riscv/include/asm/config.h
+++ b/xen/arch/riscv/include/asm/config.h
@@ -67,12 +67,8 @@
 
 /* Linkage for RISCV */
 #ifdef __ASSEMBLY__
-#define ALIGN .align 4
-
-#define ENTRY(name)                                \
-  .globl name;                                     \
-  ALIGN;                                           \
-  name:
+#define CODE_ALIGN 16
+#define CODE_FILL /* empty */
 #endif
 
 #ifdef CONFIG_RISCV_64
--- a/xen/arch/riscv/riscv64/head.S
+++ b/xen/arch/riscv/riscv64/head.S
@@ -8,7 +8,7 @@
          *   a0 -> hart_id ( bootcpu_id )
          *   a1 -> dtb_base 
          */
-ENTRY(start)
+FUNC(start)
         /* Mask all interrupts */
         csrw    CSR_SIE, zero
 
@@ -30,13 +30,14 @@ ENTRY(start)
         jal     reset_stack
 
         tail    start_xen
+END(start)
 
         .section .text, "ax", %progbits
 
-ENTRY(reset_stack)
+FUNC(reset_stack)
         la      sp, cpu0_boot_stack
         li      t0, STACK_SIZE
         add     sp, sp, t0
 
         ret
-
+END(reset_stack)
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -37,17 +37,28 @@
 
 #define END(name) .size name, . - name
 
+/*
+ * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
+ * which case we also need to get rid of the comma in the .balign directive.
+ */
+#define count_args_exp(args...) count_args(args)
+#if count_args_exp(CODE_FILL)
+# define DO_CODE_ALIGN(algn...) LASTARG(CODE_ALIGN, ## algn), CODE_FILL
+#else
+# define DO_CODE_ALIGN(algn...) LASTARG(CODE_ALIGN, ## algn)
+#endif
+
 #define FUNC(name, algn...) \
-        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+        SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(algn))
 #define LABEL(name, algn...) \
-        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+        SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(algn))
 #define DATA(name, algn...) \
         SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
 
 #define FUNC_LOCAL(name, algn...) \
-        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+        SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(algn))
 #define LABEL_LOCAL(name, algn...) \
-        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+        SYM(name, NONE, LOCAL, DO_CODE_ALIGN(algn))
 #define DATA_LOCAL(name, algn...) \
         SYM(name, DATA, LOCAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
 

[PATCH v3 7/8] PPC: switch entry point annotations to common model

[Jan Beulich]

Use the generic framework in xen/linkage.h. No change in generated code
except of course the converted symbol changes to be a hidden one.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v3: New.

--- a/xen/arch/ppc/include/asm/config.h
+++ b/xen/arch/ppc/include/asm/config.h
@@ -31,12 +31,7 @@
 
 /* Linkage for PPC */
 #ifdef __ASSEMBLY__
-#define ALIGN .p2align 2
-
-#define ENTRY(name)                                                            \
-    .globl name;                                                               \
-    ALIGN;                                                                     \
-    name:
+#define CODE_ALIGN 4
 #endif
 
 #define XEN_VIRT_START _AT(UL, 0x400000)
--- a/xen/arch/ppc/ppc64/head.S
+++ b/xen/arch/ppc/ppc64/head.S
@@ -1,8 +1,10 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 
+#include <xen/linkage.h>
+
     .section .text.header, "ax", %progbits
 
-ENTRY(start)
+FUNC(start)
     /*
      * Depending on how we were booted, the CPU could be running in either
      * Little Endian or Big Endian mode. The following trampoline from Linux
@@ -25,6 +27,4 @@ ENTRY(start)
 
     /* Now that the endianness is confirmed, continue */
 1:  b 1b
-
-    .size start, . - start
-    .type start, %function
+END(start)

[PATCH v3 8/8] tools/binfile: switch to common annotations model

[Jan Beulich]

Use DATA() / END() and drop the now redundant .global. No change in
generated data; of course the two symbols now properly gain "hidden"
binding.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v3: New.

--- a/xen/tools/binfile
+++ b/xen/tools/binfile
@@ -29,15 +29,10 @@ cat <<EOF >$target
 
         .section $section.rodata, "a", %progbits
 
-        .p2align $align
-        .global $varname
-$varname:
+DATA($varname, 1 << $align)
         .incbin "$binsource"
 .Lend:
+END($varname)
 
-        .type $varname, %object
-        .size $varname, .Lend - $varname
-
-        .global ${varname}_size
         ASM_INT(${varname}_size, .Lend - $varname)
 EOF

Re: [PATCH v3 6/8] RISC-V: annotate entry points with type and size

[Jan Beulich]

On 10.07.2023 10:56, Jan Beulich wrote:
> Use the generic framework in xen/linkage.h. No change in generated code
> except of course the converted symbols change to be hidden ones and gain
> a valid size.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

I'm sorry, the Cc list was incomplete here. Adding back the remaining REST
maintainers.

Jan

> ---
> Probably count_args_exp() should move to macros.h, but I first wanted to
> see whether anyone can suggest any better approach for checking whether
> a defined macro expands to nothing.
> ---
> v3: New.
> 
> --- a/xen/arch/riscv/entry.S
> +++ b/xen/arch/riscv/entry.S
> @@ -5,7 +5,7 @@
>  #include <asm/traps.h>
>  
>  /* WIP: only works while interrupting Xen context */
> -ENTRY(handle_trap)
> +FUNC(handle_trap)
>  
>      /* Exceptions from xen */
>  save_to_stack:
> @@ -92,3 +92,4 @@ restore_registers:
>          REG_L   sp, CPU_USER_REGS_SP(sp)
>  
>          sret
> +END(handle_trap)
> --- a/xen/arch/riscv/include/asm/asm.h
> +++ b/xen/arch/riscv/include/asm/asm.h
> @@ -7,6 +7,7 @@
>  #define _ASM_RISCV_ASM_H
>  
>  #ifdef __ASSEMBLY__
> +#include <xen/linkage.h>
>  #define __ASM_STR(x)	x
>  #else
>  #define __ASM_STR(x)	#x
> --- a/xen/arch/riscv/include/asm/config.h
> +++ b/xen/arch/riscv/include/asm/config.h
> @@ -67,12 +67,8 @@
>  
>  /* Linkage for RISCV */
>  #ifdef __ASSEMBLY__
> -#define ALIGN .align 4
> -
> -#define ENTRY(name)                                \
> -  .globl name;                                     \
> -  ALIGN;                                           \
> -  name:
> +#define CODE_ALIGN 16
> +#define CODE_FILL /* empty */
>  #endif
>  
>  #ifdef CONFIG_RISCV_64
> --- a/xen/arch/riscv/riscv64/head.S
> +++ b/xen/arch/riscv/riscv64/head.S
> @@ -8,7 +8,7 @@
>           *   a0 -> hart_id ( bootcpu_id )
>           *   a1 -> dtb_base 
>           */
> -ENTRY(start)
> +FUNC(start)
>          /* Mask all interrupts */
>          csrw    CSR_SIE, zero
>  
> @@ -30,13 +30,14 @@ ENTRY(start)
>          jal     reset_stack
>  
>          tail    start_xen
> +END(start)
>  
>          .section .text, "ax", %progbits
>  
> -ENTRY(reset_stack)
> +FUNC(reset_stack)
>          la      sp, cpu0_boot_stack
>          li      t0, STACK_SIZE
>          add     sp, sp, t0
>  
>          ret
> -
> +END(reset_stack)
> --- a/xen/include/xen/linkage.h
> +++ b/xen/include/xen/linkage.h
> @@ -37,17 +37,28 @@
>  
>  #define END(name) .size name, . - name
>  
> +/*
> + * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
> + * which case we also need to get rid of the comma in the .balign directive.
> + */
> +#define count_args_exp(args...) count_args(args)
> +#if count_args_exp(CODE_FILL)
> +# define DO_CODE_ALIGN(algn...) LASTARG(CODE_ALIGN, ## algn), CODE_FILL
> +#else
> +# define DO_CODE_ALIGN(algn...) LASTARG(CODE_ALIGN, ## algn)
> +#endif
> +
>  #define FUNC(name, algn...) \
> -        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
> +        SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(algn))
>  #define LABEL(name, algn...) \
> -        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
> +        SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(algn))
>  #define DATA(name, algn...) \
>          SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
>  
>  #define FUNC_LOCAL(name, algn...) \
> -        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
> +        SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(algn))
>  #define LABEL_LOCAL(name, algn...) \
> -        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
> +        SYM(name, NONE, LOCAL, DO_CODE_ALIGN(algn))
>  #define DATA_LOCAL(name, algn...) \
>          SYM(name, DATA, LOCAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
>  
> 
> 

Re: [PATCH v3 2/8] common: assembly entry point type/size annotations

[Jan Beulich]

On 10.07.2023 10:52, Jan Beulich wrote:
> Recent gas versions generate minimalistic Dwarf debug info for items
> annotated as functions and having their sizes specified [1]. Furthermore
> generating live patches wants items properly annotated. "Borrow" Arm's
> END() and (remotely) derive other annotation infrastructure from
> Linux'es, for all architectures to use.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Looking over my action items from Prague I notice that I forgot one
aspect here that was asked for by Andrew: To have the new framework
also respect CONFIG_CC_SPLIT_SECTIONS. I'll work on that next, but
perhaps better as in incremental patch on top.

Jan

[PATCH v3 9/8] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Jan Beulich]

Leverage the new infrastructure in xen/linkage.h to also switch to per-
function sections (when configured), deriving the specific name from the
"base" section in use at the time FUNC() is invoked.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
RFC: Since we use .subsection in UNLIKELY_START(), a perhaps not really
     wanted side effect of this change is that respective out-of-line
     code now moves much closer to its original (invoking) code.

Note that we'd need to split DATA() in order to separate r/w and r/o
contributions. Further splitting might be needed to also support more
advanced attributes (e.g. merge), hence why this isn't done right here.
Sadly while a new section's name can be derived from the presently in
use, its attributes cannot be. Hence perhaps the only thing we can do is
give DATA() a 2nd mandatory parameter. Then again I guess most data
definitions could be moved to C anyway.

--- a/xen/Makefile
+++ b/xen/Makefile
@@ -399,6 +399,9 @@ AFLAGS += -D__ASSEMBLY__
 
 $(call cc-option-add,AFLAGS,CC,-Wa$(comma)--noexecstack)
 
+# Check to see whether the assmbler supports the --sectname-subst option.
+$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)
+
 LDFLAGS-$(call ld-option,--warn-rwx-segments) += --no-warn-rwx-segments
 
 CFLAGS += $(CFLAGS-y)
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -154,6 +154,9 @@ SECTIONS
   .init.text : {
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        _einittext = .;
        . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
        *(.altinstr_replacement)
--- a/xen/arch/ppc/xen.lds.S
+++ b/xen/arch/ppc/xen.lds.S
@@ -106,6 +106,9 @@ SECTIONS
     DECL_SECTION(.init.text) {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/riscv/xen.lds.S
+++ b/xen/arch/riscv/xen.lds.S
@@ -92,6 +92,9 @@ SECTIONS
     .init.text : {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -86,6 +86,9 @@ SECTIONS
        . = ALIGN(PAGE_SIZE);
        _stextentry = .;
        *(.text.entry)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.text.entry.*)
+#endif
        . = ALIGN(PAGE_SIZE);
        _etextentry = .;
 
@@ -214,6 +217,9 @@ SECTIONS
 #endif
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        *(.text.startup)
        _einittext = .;
        /*
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -21,6 +21,14 @@
 
 #define SYM_ALIGN(algn...) .balign algn
 
+#if defined(HAVE_AS_SECTNAME_SUBST) && defined(CONFIG_CC_SPLIT_SECTIONS)
+# define SYM_PUSH_SECTION(name, attr) \
+         .pushsection %S.name, attr, %progbits; \
+         .equ .Lsplit_section, 1
+#else
+# define SYM_PUSH_SECTION(name, attr)
+#endif
+
 #define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
@@ -35,7 +43,14 @@
         SYM_ALIGN(algn);                          \
         name:
 
-#define END(name) .size name, . - name
+#define END(name) \
+        .size name, . - name; \
+        .ifdef .Lsplit_section; \
+            .if .Lsplit_section; \
+                .popsection; \
+                .equ .Lsplit_section, 0; \
+            .endif; \
+        .endif
 
 /*
  * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
@@ -49,6 +64,7 @@
 #endif
 
 #define FUNC(name, algn...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(algn))
 #define LABEL(name, algn...) \
         SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(algn))
@@ -56,6 +72,7 @@
         SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
 
 #define FUNC_LOCAL(name, algn...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(algn))
 #define LABEL_LOCAL(name, algn...) \
         SYM(name, NONE, LOCAL, DO_CODE_ALIGN(algn))

Re: [PATCH v3 9/8] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Jan Beulich]

On 17.07.2023 16:18, Jan Beulich wrote:
> Leverage the new infrastructure in xen/linkage.h to also switch to per-
> function sections (when configured), deriving the specific name from the
> "base" section in use at the time FUNC() is invoked.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

This additional change

--- a/Config.mk
+++ b/Config.mk
@@ -115,7 +115,7 @@ cc-option = $(shell if test -z "`echo 'v
 # Usage: $(call cc-option-add CFLAGS,CC,-march=winchip-c6)
 cc-option-add = $(eval $(call cc-option-add-closure,$(1),$(2),$(3)))
 define cc-option-add-closure
-    ifneq ($$(call cc-option,$$($(2)),$(3),n),n)
+    ifneq ($$(call cc-option,$$($(2)),$(firstword $(3)),n),n)
         $(1) += $(3)
     endif
 endef

is needed for ...

> --- a/xen/Makefile
> +++ b/xen/Makefile
> @@ -399,6 +399,9 @@ AFLAGS += -D__ASSEMBLY__
>  
>  $(call cc-option-add,AFLAGS,CC,-Wa$(comma)--noexecstack)
>  
> +# Check to see whether the assmbler supports the --sectname-subst option.
> +$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)

... the pair of options passed in one go here to work (when old
gas is in use). Of course something with the same overall effect,
but less impactful might do. E.g. $(filter-out -D%,$(3)) instead
of $(firstword (3)). Thoughts anyone?

Jan

Re: [PATCH v3 1/8] common: move a few macros out of xen/lib.h

[Oleksii]

On Mon, 2023-07-10 at 10:51 +0200, Jan Beulich wrote:
> Introduce xen/macros.h for this purpose. For now xen/lib.h simply
> includes xen/macro.h, until consumers can be suitable cleaned up.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> v3: New.
> 
> --- a/xen/include/xen/lib.h
> +++ b/xen/include/xen/lib.h
> @@ -1,26 +1,7 @@
>  #ifndef __LIB_H__
>  #define __LIB_H__
>  
> -#define ROUNDUP(x, a) (((x) + (a) - 1) & ~((a) - 1))
> -
> -#define IS_ALIGNED(val, align) (!((val) & ((align) - 1)))
> -
> -#define DIV_ROUND(n, d) (((n) + (d) / 2) / (d))
> -#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
> -
> -#define MASK_EXTR(v, m) (((v) & (m)) / ((m) & -(m)))
> -#define MASK_INSR(v, m) (((v) * ((m) & -(m))) & (m))
> -
> -#define count_args_(dot, a1, a2, a3, a4, a5, a6, a7, a8, x, ...) x
> -#define count_args(args...) \
> -    count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
> -
> -/* Indirect macros required for expanded argument pasting. */
> -#define PASTE_(a, b) a ## b
> -#define PASTE(a, b) PASTE_(a, b)
> -
> -#define __STR(...) #__VA_ARGS__
> -#define STR(...) __STR(__VA_ARGS__)
> +#include <xen/macros.h>
>  
>  #ifndef __ASSEMBLY__
>  
> --- /dev/null
> +++ b/xen/include/xen/macros.h
> @@ -0,0 +1,34 @@
> +#ifndef __MACROS_H__
> +#define __MACROS_H__
> +
> +#define ROUNDUP(x, a) (((x) + (a) - 1) & ~((a) - 1))
> +
> +#define IS_ALIGNED(val, align) (!((val) & ((align) - 1)))
> +
> +#define DIV_ROUND(n, d) (((n) + (d) / 2) / (d))
> +#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
> +
> +#define MASK_EXTR(v, m) (((v) & (m)) / ((m) & -(m)))
> +#define MASK_INSR(v, m) (((v) * ((m) & -(m))) & (m))
> +
> +#define count_args_(dot, a1, a2, a3, a4, a5, a6, a7, a8, x, ...) x
> +#define count_args(args...) \
> +    count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
> +
> +/* Indirect macros required for expanded argument pasting. */
> +#define PASTE_(a, b) a ## b
> +#define PASTE(a, b) PASTE_(a, b)
> +
> +#define __STR(...) #__VA_ARGS__
> +#define STR(...) __STR(__VA_ARGS__)
> +
> +#endif /* __MACROS_H__ */
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-file-style: "BSD"
> + * c-basic-offset: 4
> + * indent-tabs-mode: nil
> + * End:
> + */
> 
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>

~ Oleksii

Re: [PATCH v3 1/8] common: move a few macros out of xen/lib.h

[Shawn Anastasio]

On 7/10/23 3:51 AM, Jan Beulich wrote:
> Introduce xen/macros.h for this purpose. For now xen/lib.h simply
> includes xen/macro.h, until consumers can be suitable cleaned up.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> v3: New.
> 
> --- a/xen/include/xen/lib.h
> +++ b/xen/include/xen/lib.h
> @@ -1,26 +1,7 @@
>  #ifndef __LIB_H__
>  #define __LIB_H__
>  
> -#define ROUNDUP(x, a) (((x) + (a) - 1) & ~((a) - 1))
> -
> -#define IS_ALIGNED(val, align) (!((val) & ((align) - 1)))
> -
> -#define DIV_ROUND(n, d) (((n) + (d) / 2) / (d))
> -#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
> -
> -#define MASK_EXTR(v, m) (((v) & (m)) / ((m) & -(m)))
> -#define MASK_INSR(v, m) (((v) * ((m) & -(m))) & (m))
> -
> -#define count_args_(dot, a1, a2, a3, a4, a5, a6, a7, a8, x, ...) x
> -#define count_args(args...) \
> -    count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
> -
> -/* Indirect macros required for expanded argument pasting. */
> -#define PASTE_(a, b) a ## b
> -#define PASTE(a, b) PASTE_(a, b)
> -
> -#define __STR(...) #__VA_ARGS__
> -#define STR(...) __STR(__VA_ARGS__)
> +#include <xen/macros.h>
>  
>  #ifndef __ASSEMBLY__
>  
> --- /dev/null
> +++ b/xen/include/xen/macros.h
> @@ -0,0 +1,34 @@

Should there be an SPDX header here?

> +#ifndef __MACROS_H__
> +#define __MACROS_H__
> +
> +#define ROUNDUP(x, a) (((x) + (a) - 1) & ~((a) - 1))
> +
> +#define IS_ALIGNED(val, align) (!((val) & ((align) - 1)))
> +
> +#define DIV_ROUND(n, d) (((n) + (d) / 2) / (d))
> +#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
> +
> +#define MASK_EXTR(v, m) (((v) & (m)) / ((m) & -(m)))
> +#define MASK_INSR(v, m) (((v) * ((m) & -(m))) & (m))
> +
> +#define count_args_(dot, a1, a2, a3, a4, a5, a6, a7, a8, x, ...) x
> +#define count_args(args...) \
> +    count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
> +
> +/* Indirect macros required for expanded argument pasting. */
> +#define PASTE_(a, b) a ## b
> +#define PASTE(a, b) PASTE_(a, b)
> +
> +#define __STR(...) #__VA_ARGS__
> +#define STR(...) __STR(__VA_ARGS__)
> +
> +#endif /* __MACROS_H__ */
> +
> +/*
> + * Local variables:
> + * mode: C
> + * c-file-style: "BSD"
> + * c-basic-offset: 4
> + * indent-tabs-mode: nil
> + * End:
> + */

Reviewed-by: Shawn Anastasio <sanastasio@raptorengineering.com>

Re: [PATCH v3 1/8] common: move a few macros out of xen/lib.h

[Jan Beulich]

On 18.07.2023 21:49, Shawn Anastasio wrote:
> On 7/10/23 3:51 AM, Jan Beulich wrote:
>> --- /dev/null
>> +++ b/xen/include/xen/macros.h
>> @@ -0,0 +1,34 @@
> 
> Should there be an SPDX header here?

Probably, but I wouldn't know which version to use, since lib.h doesn't
have one either. Not putting one there leaves things a clear or vague
as they are for others without the tag (and without a full license
header); putting one there would firmly state something, which then may
be wrong. Therefore I think this will need sorting in (more or less)
one go for all of the "license-free" source files.

>> +#ifndef __MACROS_H__
>> +#define __MACROS_H__
>> +
>> +#define ROUNDUP(x, a) (((x) + (a) - 1) & ~((a) - 1))
>> +
>> +#define IS_ALIGNED(val, align) (!((val) & ((align) - 1)))
>> +
>> +#define DIV_ROUND(n, d) (((n) + (d) / 2) / (d))
>> +#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
>> +
>> +#define MASK_EXTR(v, m) (((v) & (m)) / ((m) & -(m)))
>> +#define MASK_INSR(v, m) (((v) * ((m) & -(m))) & (m))
>> +
>> +#define count_args_(dot, a1, a2, a3, a4, a5, a6, a7, a8, x, ...) x
>> +#define count_args(args...) \
>> +    count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
>> +
>> +/* Indirect macros required for expanded argument pasting. */
>> +#define PASTE_(a, b) a ## b
>> +#define PASTE(a, b) PASTE_(a, b)
>> +
>> +#define __STR(...) #__VA_ARGS__
>> +#define STR(...) __STR(__VA_ARGS__)
>> +
>> +#endif /* __MACROS_H__ */
>> +
>> +/*
>> + * Local variables:
>> + * mode: C
>> + * c-file-style: "BSD"
>> + * c-basic-offset: 4
>> + * indent-tabs-mode: nil
>> + * End:
>> + */
> 
> Reviewed-by: Shawn Anastasio <sanastasio@raptorengineering.com>

Thanks.

Jan

Re: [PATCH v3 6/8] RISC-V: annotate entry points with type and size

[Oleksii]

On Mon, 2023-07-10 at 10:58 +0200, Jan Beulich wrote:
> On 10.07.2023 10:56, Jan Beulich wrote:
> > Use the generic framework in xen/linkage.h. No change in generated
> > code
> > except of course the converted symbols change to be hidden ones and
> > gain
> > a valid size.
> > 
> > Signed-off-by: Jan Beulich <jbeulich@suse.com>
> 
> I'm sorry, the Cc list was incomplete here. Adding back the remaining
> REST
> maintainers.
> 
> Jan
> 
> > ---
> > Probably count_args_exp() should move to macros.h, but I first
> > wanted to
> > see whether anyone can suggest any better approach for checking
> > whether
> > a defined macro expands to nothing.
What about introduction of conditional macros ?
Something similar to:
#include <stdio.h>

#define CONDITIONAL_RETURN(arg1, arg2) CONDITIONAL_RETURN_IMPL(arg1,
arg2, EMPTY)

#define EMPTY(...) ""

#define CONDITIONAL_RETURN_IMPL(arg1, arg2, empty_check) \
    CONDITIONAL_RETURN_##empty_check(arg1, arg2)

#define CONDITIONAL_RETURN_EMPTY(arg1, arg2) \
    CONDITIONAL_RETURN_ARG1(arg1, arg2)

#define CONDITIONAL_RETURN_ARG1(arg1, arg2) arg1, arg2

#define CONDITIONAL_RETURN_ARG2(arg1, arg2) arg1

int main() {
    int a = 42;
    const char* b = "hello";

    // Second argument is not empty, both arguments are returned
    printf("Case 1: %d, %s\n", CONDITIONAL_RETURN(a, b));  // Prints:
Case 1: 42, hello

    // Second argument is empty, only the first argument is returned
    printf("Case 2: %d, %s\n", CONDITIONAL_RETURN(a, "")); // Prints:
Case 2: 42,

    return 0;
}

and then define DO_CODE_ALIGN using CONDITIONAL_RETURN?


~ Oleksii

> > ---
> > v3: New.
> > 
> > --- a/xen/arch/riscv/entry.S
> > +++ b/xen/arch/riscv/entry.S
> > @@ -5,7 +5,7 @@
> >  #include <asm/traps.h>
> >  
> >  /* WIP: only works while interrupting Xen context */
> > -ENTRY(handle_trap)
> > +FUNC(handle_trap)
> >  
> >      /* Exceptions from xen */
> >  save_to_stack:
> > @@ -92,3 +92,4 @@ restore_registers:
> >          REG_L   sp, CPU_USER_REGS_SP(sp)
> >  
> >          sret
> > +END(handle_trap)
> > --- a/xen/arch/riscv/include/asm/asm.h
> > +++ b/xen/arch/riscv/include/asm/asm.h
> > @@ -7,6 +7,7 @@
> >  #define _ASM_RISCV_ASM_H
> >  
> >  #ifdef __ASSEMBLY__
> > +#include <xen/linkage.h>
> >  #define __ASM_STR(x)   x
> >  #else
> >  #define __ASM_STR(x)   #x
> > --- a/xen/arch/riscv/include/asm/config.h
> > +++ b/xen/arch/riscv/include/asm/config.h
> > @@ -67,12 +67,8 @@
> >  
> >  /* Linkage for RISCV */
> >  #ifdef __ASSEMBLY__
> > -#define ALIGN .align 4
> > -
> > -#define ENTRY(name)                                \
> > -  .globl name;                                     \
> > -  ALIGN;                                           \
> > -  name:
> > +#define CODE_ALIGN 16
> > +#define CODE_FILL /* empty */
> >  #endif
> >  
> >  #ifdef CONFIG_RISCV_64
> > --- a/xen/arch/riscv/riscv64/head.S
> > +++ b/xen/arch/riscv/riscv64/head.S
> > @@ -8,7 +8,7 @@
> >           *   a0 -> hart_id ( bootcpu_id )
> >           *   a1 -> dtb_base 
> >           */
> > -ENTRY(start)
> > +FUNC(start)
> >          /* Mask all interrupts */
> >          csrw    CSR_SIE, zero
> >  
> > @@ -30,13 +30,14 @@ ENTRY(start)
> >          jal     reset_stack
> >  
> >          tail    start_xen
> > +END(start)
> >  
> >          .section .text, "ax", %progbits
> >  
> > -ENTRY(reset_stack)
> > +FUNC(reset_stack)
> >          la      sp, cpu0_boot_stack
> >          li      t0, STACK_SIZE
> >          add     sp, sp, t0
> >  
> >          ret
> > -
> > +END(reset_stack)
> > --- a/xen/include/xen/linkage.h
> > +++ b/xen/include/xen/linkage.h
> > @@ -37,17 +37,28 @@
> >  
> >  #define END(name) .size name, . - name
> >  
> > +/*
> > + * CODE_FILL in particular may need to expand to nothing (e.g. for
> > RISC-V), in
> > + * which case we also need to get rid of the comma in the .balign
> > directive.
> > + */
> > +#define count_args_exp(args...) count_args(args)
> > +#if count_args_exp(CODE_FILL)
> > +# define DO_CODE_ALIGN(algn...) LASTARG(CODE_ALIGN, ## algn),
> > CODE_FILL
> > +#else
> > +# define DO_CODE_ALIGN(algn...) LASTARG(CODE_ALIGN, ## algn)
> > +#endif
> > +
> >  #define FUNC(name, algn...) \
> > -        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## algn),
> > CODE_FILL)
> > +        SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(algn))
> >  #define LABEL(name, algn...) \
> > -        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## algn),
> > CODE_FILL)
> > +        SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(algn))
> >  #define DATA(name, algn...) \
> >          SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn),
> > DATA_FILL)
> >  
> >  #define FUNC_LOCAL(name, algn...) \
> > -        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## algn),
> > CODE_FILL)
> > +        SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(algn))
> >  #define LABEL_LOCAL(name, algn...) \
> > -        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## algn),
> > CODE_FILL)
> > +        SYM(name, NONE, LOCAL, DO_CODE_ALIGN(algn))
> >  #define DATA_LOCAL(name, algn...) \
> >          SYM(name, DATA, LOCAL, LASTARG(DATA_ALIGN, ## algn),
> > DATA_FILL)
> >  

Re: [PATCH v3 6/8] RISC-V: annotate entry points with type and size

[Jan Beulich]

On 26.07.2023 17:28, Oleksii wrote:
> On Mon, 2023-07-10 at 10:58 +0200, Jan Beulich wrote:
>> On 10.07.2023 10:56, Jan Beulich wrote:
>>> Use the generic framework in xen/linkage.h. No change in generated
>>> code
>>> except of course the converted symbols change to be hidden ones and
>>> gain
>>> a valid size.
>>>
>>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>
>> I'm sorry, the Cc list was incomplete here. Adding back the remaining
>> REST
>> maintainers.
>>
>> Jan
>>
>>> ---
>>> Probably count_args_exp() should move to macros.h, but I first
>>> wanted to
>>> see whether anyone can suggest any better approach for checking
>>> whether
>>> a defined macro expands to nothing.
> What about introduction of conditional macros ?
> Something similar to:
> #include <stdio.h>
> 
> #define CONDITIONAL_RETURN(arg1, arg2) CONDITIONAL_RETURN_IMPL(arg1,
> arg2, EMPTY)
> 
> #define EMPTY(...) ""
> 
> #define CONDITIONAL_RETURN_IMPL(arg1, arg2, empty_check) \
>     CONDITIONAL_RETURN_##empty_check(arg1, arg2)
> 
> #define CONDITIONAL_RETURN_EMPTY(arg1, arg2) \
>     CONDITIONAL_RETURN_ARG1(arg1, arg2)
> 
> #define CONDITIONAL_RETURN_ARG1(arg1, arg2) arg1, arg2
> 
> #define CONDITIONAL_RETURN_ARG2(arg1, arg2) arg1

I don't see how this would be used in your scheme. It ...

> int main() {
>     int a = 42;
>     const char* b = "hello";
> 
>     // Second argument is not empty, both arguments are returned
>     printf("Case 1: %d, %s\n", CONDITIONAL_RETURN(a, b));  // Prints:
> Case 1: 42, hello
> 
>     // Second argument is empty, only the first argument is returned
>     printf("Case 2: %d, %s\n", CONDITIONAL_RETURN(a, "")); // Prints:
> Case 2: 42,

... certainly isn't here, or this likely would cause at least a warning
from the compiler (for there being too few arguments to printf()) and
then a runtime UB for interpreting something as a pointer to a string
which likely isn't.

>     return 0;
> }
> 
> and then define DO_CODE_ALIGN using CONDITIONAL_RETURN?

Afaict instead of getting rid of the comma, you'd actually add ""
after it. What am I missing?

Jan

Re: [PATCH v3 6/8] RISC-V: annotate entry points with type and size

[Oleksii]

On Wed, 2023-07-26 at 17:43 +0200, Jan Beulich wrote:
> On 26.07.2023 17:28, Oleksii wrote:
> > On Mon, 2023-07-10 at 10:58 +0200, Jan Beulich wrote:
> > > On 10.07.2023 10:56, Jan Beulich wrote:
> > > > Use the generic framework in xen/linkage.h. No change in
> > > > generated
> > > > code
> > > > except of course the converted symbols change to be hidden ones
> > > > and
> > > > gain
> > > > a valid size.
> > > > 
> > > > Signed-off-by: Jan Beulich <jbeulich@suse.com>
> > > 
> > > I'm sorry, the Cc list was incomplete here. Adding back the
> > > remaining
> > > REST
> > > maintainers.
> > > 
> > > Jan
> > > 
> > > > ---
> > > > Probably count_args_exp() should move to macros.h, but I first
> > > > wanted to
> > > > see whether anyone can suggest any better approach for checking
> > > > whether
> > > > a defined macro expands to nothing.
> > What about introduction of conditional macros ?
> > Something similar to:
> > #include <stdio.h>
> > 
> > #define CONDITIONAL_RETURN(arg1, arg2)
> > CONDITIONAL_RETURN_IMPL(arg1,
> > arg2, EMPTY)
> > 
> > #define EMPTY(...) ""
> > 
> > #define CONDITIONAL_RETURN_IMPL(arg1, arg2, empty_check) \
> >     CONDITIONAL_RETURN_##empty_check(arg1, arg2)
> > 
> > #define CONDITIONAL_RETURN_EMPTY(arg1, arg2) \
> >     CONDITIONAL_RETURN_ARG1(arg1, arg2)
> > 
> > #define CONDITIONAL_RETURN_ARG1(arg1, arg2) arg1, arg2
> > 
> > #define CONDITIONAL_RETURN_ARG2(arg1, arg2) arg1
> 
> I don't see how this would be used in your scheme. It ...
> 
> > int main() {
> >     int a = 42;
> >     const char* b = "hello";
> > 
> >     // Second argument is not empty, both arguments are returned
> >     printf("Case 1: %d, %s\n", CONDITIONAL_RETURN(a, b));  //
> > Prints:
> > Case 1: 42, hello
> > 
> >     // Second argument is empty, only the first argument is
> > returned
> >     printf("Case 2: %d, %s\n", CONDITIONAL_RETURN(a, "")); //
> > Prints:
> > Case 2: 42,
> 
> ... certainly isn't here, or this likely would cause at least a
> warning
> from the compiler (for there being too few arguments to printf()) and
> then a runtime UB for interpreting something as a pointer to a string
> which likely isn't.
> 
> >     return 0;
> > }
> > 
> > and then define DO_CODE_ALIGN using CONDITIONAL_RETURN?
> 
> Afaict instead of getting rid of the comma, you'd actually add ""
> after it. What am I missing?
You are right. I missed that actually it returns "".

~ Oleksii

[PATCH v4 0/8] annotate entry points with type and size

[Jan Beulich]

The model introduced in patch 1 is now arch-agnostic, and all arch-es
are being switched at least partly (to at least give examples of how
things will look like); PPC and RISC-V are still small enough to switch
completely in one go.

1: common: assembly entry point type/size annotations
2: x86: annotate entry points with type and size
3: x86: also mark assembler globals hidden
4: Arm: annotate entry points with type and size
5: RISC-V: annotate entry points with type and size
6: PPC: switch entry point annotations to common model
7: tools/binfile: switch to common annotations model
8: common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

Jan

[PATCH v4 1/8] common: assembly entry point type/size annotations

[Jan Beulich]

Recent gas versions generate minimalistic Dwarf debug info for items
annotated as functions and having their sizes specified [1]. Furthermore
generating live patches wants items properly annotated. "Borrow" Arm's
END() and (remotely) derive other annotation infrastructure from
Linux'es, for all architectures to use.

Signed-off-by: Jan Beulich <jbeulich@suse.com>

[1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
---
v3: New, generalized from earlier x86-only version. LAST() (now
    LASTARG()) moved to macros.h.
---
TBD: What to set CODE_ALIGN to by default? Or should we requires arch-es
     to define that in all cases?

TBD: {CODE,DATA}_ALIGN are byte granular, such that a value of 0 can be
     specified (in case this has some special meaning on an arch;
     conceivably it could mean to use some kind of arch default). We may
     not strictly need that, and hence we could also make these power-of
     -2 values (using .p2align).

Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
still have ALIGN.

Note further that FUNC()'s etc "algn" parameter is intended to allow for
only no or a single argument. If we wanted to also make the fill value
customizable per call site, the constructs would need re-doing to some
degree.

--- /dev/null
+++ b/xen/include/xen/linkage.h
@@ -0,0 +1,56 @@
+#ifndef __LINKAGE_H__
+#define __LINKAGE_H__
+
+#ifdef __ASSEMBLY__
+
+#include <xen/macros.h>
+
+#ifndef CODE_ALIGN
+# define CODE_ALIGN ??
+#endif
+#ifndef CODE_FILL
+# define CODE_FILL ~0
+#endif
+
+#ifndef DATA_ALIGN
+# define DATA_ALIGN 0
+#endif
+#ifndef DATA_FILL
+# define DATA_FILL ~0
+#endif
+
+#define SYM_ALIGN(algn...) .balign algn
+
+#define SYM_L_GLOBAL(name) .globl name
+#define SYM_L_WEAK(name)   .weak name
+#define SYM_L_LOCAL(name)  /* nothing */
+
+#define SYM_T_FUNC         STT_FUNC
+#define SYM_T_DATA         STT_OBJECT
+#define SYM_T_NONE         STT_NOTYPE
+
+#define SYM(name, typ, linkage, algn...)          \
+        .type name, SYM_T_ ## typ;                \
+        SYM_L_ ## linkage(name);                  \
+        SYM_ALIGN(algn);                          \
+        name:
+
+#define END(name) .size name, . - name
+
+#define FUNC(name, algn...) \
+        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+#define LABEL(name, algn...) \
+        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+#define DATA(name, algn...) \
+        SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
+
+#define FUNC_LOCAL(name, algn...) \
+        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+#define LABEL_LOCAL(name, algn...) \
+        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+#define DATA_LOCAL(name, algn...) \
+        SYM(name, DATA, LOCAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
+
+#endif /*  __ASSEMBLY__ */
+
+#endif /* __LINKAGE_H__ */
--- a/xen/include/xen/macros.h
+++ b/xen/include/xen/macros.h
@@ -15,6 +15,15 @@
 #define count_args(args...) \
     count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
 
+#define ARG1_(x, y...) (x)
+#define ARG2_(x, y...) ARG1_(y)
+#define ARG3_(x, y...) ARG2_(y)
+#define ARG4_(x, y...) ARG3_(y)
+
+#define ARG__(nr) ARG ## nr ## _
+#define ARG_(nr)  ARG__(nr)
+#define LASTARG(x, y...) ARG_(count_args(x, ## y))(x, ## y)
+
 /* Indirect macros required for expanded argument pasting. */
 #define PASTE_(a, b) a ## b
 #define PASTE(a, b) PASTE_(a, b)

[PATCH v4 2/8] x86: annotate entry points with type and size

[Jan Beulich]

Use the generic framework in xen/linkage.h.

For switch_to_kernel() and restore_all_guest() so far implicit alignment
(from being first in their respective sections) is being made explicit
(as in: using FUNC() without 2nd argument). Whereas for
{,compat}create_bounce_frame() and autogen_entrypoints[] alignment is
newly arranged for.

Except for the added/adjusted alignment padding (including their
knock-on effects) no change in generated code/data. Note that the basis
for support of weak definitions is added despite them not having any use
right now.

Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
use site wants the symbol global anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v4: Correct simd_coprocessor_error's (now entry_XM) END(). Re-base.
v3: !PV variant of ret_from_intr is local. Introduction of macros split
    off to separate patch. Also adjust ASM_INT(). Re-base.
v2: Full rework.
---
Only two of the assembly files are being converted for now. More could
be done right here or as follow-on in separate patches.

Note that the FB-label in autogen_stubs() cannot be converted just yet:
Such labels cannot be used with .type. We could further diverge from
Linux'es model and avoid setting STT_NOTYPE explicitly (that's the type
labels get by default anyway).

The ASM_INT() redundancy of .global will be eliminated by a subsequent
patch.

I didn't think that I should make CODE_FILL evaluate to 0xCC right here;
IMO that wants to be a separate patch.

--- a/xen/arch/x86/include/asm/asm_defns.h
+++ b/xen/arch/x86/include/asm/asm_defns.h
@@ -13,6 +13,7 @@
 #include <asm/alternative.h>
 
 #ifdef __ASSEMBLY__
+#include <xen/linkage.h>
 #include <asm/asm-defns.h>
 #ifndef CONFIG_INDIRECT_THUNK
 .equ CONFIG_INDIRECT_THUNK, 0
@@ -343,10 +344,7 @@ static always_inline void stac(void)
     .popsection
 
 #define ASM_INT(label, val)                 \
-    .p2align 2;                             \
-label: .long (val);                         \
-    .size label, . - label;                 \
-    .type label, @object
+    DATA(label, 4) .long (val); END(label)
 
 #define ASM_CONSTANT(name, value)                \
     asm ( ".equ " #name ", %P0; .global " #name  \
--- a/xen/arch/x86/include/asm/config.h
+++ b/xen/arch/x86/include/asm/config.h
@@ -43,7 +43,9 @@
 
 /* Linkage for x86 */
 #ifdef __ASSEMBLY__
-#define ALIGN .align 16,0x90
+#define CODE_ALIGN 16
+#define CODE_FILL 0x90
+#define ALIGN .align CODE_ALIGN, CODE_FILL
 #define ENTRY(name)                             \
   .globl name;                                  \
   ALIGN;                                        \
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -11,7 +11,7 @@
 #include <public/xen.h>
 #include <irq_vectors.h>
 
-ENTRY(entry_int82)
+FUNC(entry_int82)
         ENDBR64
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $0
@@ -27,9 +27,10 @@ ENTRY(entry_int82)
 
         mov   %rsp, %rdi
         call  do_entry_int82
+END(entry_int82)
 
 /* %rbx: struct vcpu */
-ENTRY(compat_test_all_events)
+FUNC(compat_test_all_events)
         ASSERT_NOT_IN_ATOMIC
         cli                             # tests must not race interrupts
 /*compat_test_softirqs:*/
@@ -66,24 +67,21 @@ compat_test_guest_events:
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-compat_process_softirqs:
+LABEL_LOCAL(compat_process_softirqs)
         sti
         call  do_softirq
         jmp   compat_test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu, %rdx: struct trap_bounce */
-.Lcompat_process_trapbounce:
+LABEL_LOCAL(.Lcompat_process_trapbounce)
         sti
 .Lcompat_bounce_exception:
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
 
-	ALIGN
 /* %rbx: struct vcpu */
-compat_process_mce:
+LABEL_LOCAL(compat_process_mce)
         testb $1 << VCPU_TRAP_MCE,VCPU_async_exception_mask(%rbx)
         jnz   .Lcompat_test_guest_nmi
         sti
@@ -97,9 +95,8 @@ compat_process_mce:
         movb %dl,VCPU_async_exception_mask(%rbx)
         jmp   compat_process_trap
 
-	ALIGN
 /* %rbx: struct vcpu */
-compat_process_nmi:
+LABEL_LOCAL(compat_process_nmi)
         testb $1 << VCPU_TRAP_NMI,VCPU_async_exception_mask(%rbx)
         jnz   compat_test_guest_events
         sti
@@ -116,9 +113,10 @@ compat_process_trap:
         leaq  VCPU_trap_bounce(%rbx),%rdx
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_test_all_events)
 
 /* %rbx: struct vcpu, interrupts disabled */
-ENTRY(compat_restore_all_guest)
+FUNC(compat_restore_all_guest)
         ASSERT_INTERRUPTS_DISABLED
         mov   $~(X86_EFLAGS_IOPL | X86_EFLAGS_VM), %r11d
         and   UREGS_eflags(%rsp),%r11d
@@ -161,9 +159,10 @@ ENTRY(compat_restore_all_guest)
         RESTORE_ALL adj=8 compat=1
 .Lft0:  iretq
         _ASM_PRE_EXTABLE(.Lft0, handle_exception)
+END(compat_restore_all_guest)
 
 /* This mustn't modify registers other than %rax. */
-ENTRY(cr4_pv32_restore)
+FUNC(cr4_pv32_restore)
         push  %rdx
         GET_CPUINFO_FIELD(cr4, dx)
         mov   (%rdx), %rax
@@ -193,8 +192,9 @@ ENTRY(cr4_pv32_restore)
         pop   %rdx
         xor   %eax, %eax
         ret
+END(cr4_pv32_restore)
 
-ENTRY(compat_syscall)
+FUNC(compat_syscall)
         /* Fix up reported %cs/%ss for compat domains. */
         movl  $FLAT_COMPAT_USER_SS, UREGS_ss(%rsp)
         movl  $FLAT_COMPAT_USER_CS, UREGS_cs(%rsp)
@@ -222,8 +222,9 @@ UNLIKELY_END(compat_syscall_gpf)
         movw  %si,TRAPBOUNCE_cs(%rdx)
         movb  %cl,TRAPBOUNCE_flags(%rdx)
         jmp   .Lcompat_bounce_exception
+END(compat_syscall)
 
-ENTRY(compat_sysenter)
+FUNC(compat_sysenter)
         CR4_PV32_RESTORE
         movq  VCPU_trap_ctxt(%rbx),%rcx
         cmpb  $X86_EXC_GP, UREGS_entry_vector(%rsp)
@@ -236,17 +237,19 @@ ENTRY(compat_sysenter)
         movw  %ax,TRAPBOUNCE_cs(%rdx)
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_sysenter)
 
-ENTRY(compat_int80_direct_trap)
+FUNC(compat_int80_direct_trap)
         CR4_PV32_RESTORE
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_int80_direct_trap)
 
 /* CREATE A BASIC EXCEPTION FRAME ON GUEST OS (RING-1) STACK:            */
 /*   {[ERRCODE,] EIP, CS, EFLAGS, [ESP, SS]}                             */
 /* %rdx: trap_bounce, %rbx: struct vcpu                                  */
 /* On return only %rbx and %rdx are guaranteed non-clobbered.            */
-compat_create_bounce_frame:
+FUNC_LOCAL(compat_create_bounce_frame)
         ASSERT_INTERRUPTS_ENABLED
         mov   %fs,%edi
         ALTERNATIVE "", stac, X86_FEATURE_XEN_SMAP
@@ -352,3 +355,4 @@ compat_crash_page_fault:
         jmp   .Lft14
 .previous
         _ASM_EXTABLE(.Lft14, .Lfx14)
+END(compat_create_bounce_frame)
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -24,7 +24,7 @@
 
 #ifdef CONFIG_PV
 /* %rbx: struct vcpu */
-switch_to_kernel:
+FUNC_LOCAL(switch_to_kernel)
         leaq  VCPU_trap_bounce(%rbx),%rdx
 
         /* TB_eip = 32-bit syscall ? syscall32_addr : syscall_addr */
@@ -89,24 +89,21 @@ test_guest_events:
         call  create_bounce_frame
         jmp   test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_softirqs:
+LABEL_LOCAL(process_softirqs)
         sti
         call do_softirq
         jmp  test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu, %rdx struct trap_bounce */
-.Lprocess_trapbounce:
+LABEL_LOCAL(.Lprocess_trapbounce)
         sti
 .Lbounce_exception:
         call  create_bounce_frame
         jmp   test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_mce:
+LABEL_LOCAL(process_mce)
         testb $1 << VCPU_TRAP_MCE, VCPU_async_exception_mask(%rbx)
         jnz  .Ltest_guest_nmi
         sti
@@ -120,9 +117,8 @@ process_mce:
         movb %dl, VCPU_async_exception_mask(%rbx)
         jmp  process_trap
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_nmi:
+LABEL_LOCAL(process_nmi)
         testb $1 << VCPU_TRAP_NMI, VCPU_async_exception_mask(%rbx)
         jnz  test_guest_events
         sti
@@ -139,11 +135,12 @@ process_trap:
         leaq VCPU_trap_bounce(%rbx), %rdx
         call create_bounce_frame
         jmp  test_all_events
+END(switch_to_kernel)
 
         .section .text.entry, "ax", @progbits
 
 /* %rbx: struct vcpu, interrupts disabled */
-restore_all_guest:
+FUNC_LOCAL(restore_all_guest)
         ASSERT_INTERRUPTS_DISABLED
 
         /* Stash guest SPEC_CTRL value while we can read struct vcpu. */
@@ -220,8 +217,7 @@ restore_all_guest:
         sysretq
 1:      sysretl
 
-        ALIGN
-.Lrestore_rcx_iret_exit_to_guest:
+LABEL_LOCAL(.Lrestore_rcx_iret_exit_to_guest)
         movq  8(%rsp), %rcx           # RIP
 /* No special register assumptions. */
 iret_exit_to_guest:
@@ -230,6 +226,7 @@ iret_exit_to_guest:
         addq  $8,%rsp
 .Lft0:  iretq
         _ASM_PRE_EXTABLE(.Lft0, handle_exception)
+END(restore_all_guest)
 
 /*
  * When entering SYSCALL from kernel mode:
@@ -246,7 +243,7 @@ iret_exit_to_guest:
  *  - Guest %rsp stored in %rax
  *  - Xen stack loaded, pointing at the %ss slot
  */
-ENTRY(lstar_enter)
+FUNC(lstar_enter)
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
 #endif
@@ -281,9 +278,10 @@ ENTRY(lstar_enter)
         mov   %rsp, %rdi
         call  pv_hypercall
         jmp   test_all_events
+END(lstar_enter)
 
 /* See lstar_enter for entry register state. */
-ENTRY(cstar_enter)
+FUNC(cstar_enter)
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
 #endif
@@ -321,8 +319,9 @@ ENTRY(cstar_enter)
         jne   compat_syscall
 #endif
         jmp   switch_to_kernel
+END(cstar_enter)
 
-ENTRY(sysenter_entry)
+FUNC(sysenter_entry)
         ENDBR64
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
@@ -331,7 +330,7 @@ ENTRY(sysenter_entry)
         pushq $FLAT_USER_SS
         pushq $0
         pushfq
-GLOBAL(sysenter_eflags_saved)
+LABEL(sysenter_eflags_saved, 0)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $3 /* ring 3 null cs */
         pushq $0 /* null rip */
@@ -385,8 +384,9 @@ UNLIKELY_END(sysenter_gpf)
         jne   compat_sysenter
 #endif
         jmp   .Lbounce_exception
+END(sysenter_entry)
 
-ENTRY(int80_direct_trap)
+FUNC(int80_direct_trap)
         ENDBR64
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $0
@@ -474,6 +474,7 @@ int80_slow_path:
          */
         GET_STACK_END(14)
         jmp   handle_exception_saved
+END(int80_direct_trap)
 
         /* create_bounce_frame & helpers don't need to be in .text.entry */
         .text
@@ -482,7 +483,7 @@ int80_slow_path:
 /*   { RCX, R11, [ERRCODE,] RIP, CS, RFLAGS, RSP, SS }                   */
 /* %rdx: trap_bounce, %rbx: struct vcpu                                  */
 /* On return only %rbx and %rdx are guaranteed non-clobbered.            */
-create_bounce_frame:
+FUNC_LOCAL(create_bounce_frame)
         ASSERT_INTERRUPTS_ENABLED
         testb $TF_kernel_mode,VCPU_thread_flags(%rbx)
         jnz   1f
@@ -618,6 +619,7 @@ ENTRY(dom_crash_sync_extable)
         xorl  %edi,%edi
         jmp   asm_domain_crash_synchronous /* Does not return */
         .popsection
+END(create_bounce_frame)
 #endif /* CONFIG_PV */
 
 /* --- CODE BELOW THIS LINE (MOSTLY) NOT GUEST RELATED --- */
@@ -626,7 +628,7 @@ ENTRY(dom_crash_sync_extable)
 
 /* No special register assumptions. */
 #ifdef CONFIG_PV
-ENTRY(continue_pv_domain)
+FUNC(continue_pv_domain)
         ENDBR64
         call  check_wakeup_from_wait
 ret_from_intr:
@@ -641,26 +643,28 @@ ret_from_intr:
 #else
         jmp   test_all_events
 #endif
+END(continue_pv_domain)
 #else
-ret_from_intr:
+FUNC_LOCAL(ret_from_intr, 0)
         ASSERT_CONTEXT_IS_XEN
         jmp   restore_all_xen
+END(ret_from_intr)
 #endif
 
         .section .init.text, "ax", @progbits
-ENTRY(early_page_fault)
+FUNC(early_page_fault)
         ENDBR64
         movl  $X86_EXC_PF, 4(%rsp)
         SAVE_ALL
         movq  %rsp, %rdi
         call  do_early_page_fault
         jmp   restore_all_xen
+END(early_page_fault)
 
         .section .text.entry, "ax", @progbits
 
-        ALIGN
 /* No special register assumptions. */
-restore_all_xen:
+FUNC_LOCAL(restore_all_xen)
         /*
          * Check whether we need to switch to the per-CPU page tables, in
          * case we return to late PV exit code (from an NMI or #MC).
@@ -677,8 +681,9 @@ UNLIKELY_END(exit_cr3)
 
         RESTORE_ALL adj=8
         iretq
+END(restore_all_xen)
 
-ENTRY(common_interrupt)
+FUNC(common_interrupt)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
 
@@ -707,12 +712,14 @@ ENTRY(common_interrupt)
         mov   %r15, STACK_CPUINFO_FIELD(xen_cr3)(%r14)
         mov   %bl, STACK_CPUINFO_FIELD(use_pv_cr3)(%r14)
         jmp ret_from_intr
+END(common_interrupt)
 
-ENTRY(entry_PF)
+FUNC(entry_PF)
         ENDBR64
         movl  $X86_EXC_PF, 4(%rsp)
+END(entry_PF)
 /* No special register assumptions. */
-GLOBAL(handle_exception)
+FUNC(handle_exception, 0)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
 
@@ -880,92 +887,108 @@ FATAL_exception_with_ints_disabled:
         xorl  %esi,%esi
         movq  %rsp,%rdi
         tailcall fatal_trap
+END(handle_exception)
 
-ENTRY(entry_DE)
+FUNC(entry_DE)
         ENDBR64
         pushq $0
         movl  $X86_EXC_DE, 4(%rsp)
         jmp   handle_exception
+END(entry_DE)
 
-ENTRY(entry_MF)
+FUNC(entry_MF)
         ENDBR64
         pushq $0
         movl  $X86_EXC_MF, 4(%rsp)
         jmp   handle_exception
+END(entry_MF)
 
-ENTRY(entry_XM)
+FUNC(entry_XM)
         ENDBR64
         pushq $0
         movl  $X86_EXC_XM, 4(%rsp)
         jmp   handle_exception
+END(entry_XM)
 
-ENTRY(entry_NM)
+FUNC(entry_NM)
         ENDBR64
         pushq $0
         movl  $X86_EXC_NM, 4(%rsp)
         jmp   handle_exception
+END(entry_NM)
 
-ENTRY(entry_DB)
+FUNC(entry_DB)
         ENDBR64
         pushq $0
         movl  $X86_EXC_DB, 4(%rsp)
         jmp   handle_ist_exception
+END(entry_DB)
 
-ENTRY(entry_BP)
+FUNC(entry_BP)
         ENDBR64
         pushq $0
         movl  $X86_EXC_BP, 4(%rsp)
         jmp   handle_exception
+END(entry_BP)
 
-ENTRY(entry_OF)
+FUNC(entry_OF)
         ENDBR64
         pushq $0
         movl  $X86_EXC_OF, 4(%rsp)
         jmp   handle_exception
+END(entry_OF)
 
-ENTRY(entry_BR)
+FUNC(entry_BR)
         ENDBR64
         pushq $0
         movl  $X86_EXC_BR, 4(%rsp)
         jmp   handle_exception
+END(entry_BR)
 
-ENTRY(entry_UD)
+FUNC(entry_UD)
         ENDBR64
         pushq $0
         movl  $X86_EXC_UD, 4(%rsp)
         jmp   handle_exception
+END(entry_UD)
 
-ENTRY(entry_TS)
+FUNC(entry_TS)
         ENDBR64
         movl  $X86_EXC_TS, 4(%rsp)
         jmp   handle_exception
+END(entry_TS)
 
-ENTRY(entry_NP)
+FUNC(entry_NP)
         ENDBR64
         movl  $X86_EXC_NP, 4(%rsp)
         jmp   handle_exception
+END(entry_NP)
 
-ENTRY(entry_SS)
+FUNC(entry_SS)
         ENDBR64
         movl  $X86_EXC_SS, 4(%rsp)
         jmp   handle_exception
+END(entry_SS)
 
-ENTRY(entry_GP)
+FUNC(entry_GP)
         ENDBR64
         movl  $X86_EXC_GP, 4(%rsp)
         jmp   handle_exception
+END(entry_GP)
 
-ENTRY(entry_AC)
+FUNC(entry_AC)
         ENDBR64
         movl  $X86_EXC_AC, 4(%rsp)
         jmp   handle_exception
+END(entry_AC)
 
-ENTRY(entry_CP)
+FUNC(entry_CP)
         ENDBR64
         movl  $X86_EXC_CP, 4(%rsp)
         jmp   handle_exception
+END(entry_CP)
 
-ENTRY(entry_DF)
+FUNC(entry_DF)
         ENDBR64
         movl  $X86_EXC_DF, 4(%rsp)
         /* Set AC to reduce chance of further SMAP faults */
@@ -988,8 +1011,9 @@ ENTRY(entry_DF)
 
         movq  %rsp,%rdi
         tailcall do_double_fault
+END(entry_DF)
 
-ENTRY(entry_NMI)
+FUNC(entry_NMI)
         ENDBR64
         pushq $0
         movl  $X86_EXC_NMI, 4(%rsp)
@@ -1116,21 +1140,24 @@ handle_ist_exception:
         ASSERT_CONTEXT_IS_XEN
         jmp   restore_all_xen
 #endif
+END(entry_NMI)
 
-ENTRY(entry_MC)
+FUNC(entry_MC)
         ENDBR64
         pushq $0
         movl  $X86_EXC_MC, 4(%rsp)
         jmp   handle_ist_exception
+END(entry_MC)
 
 /* No op trap handler.  Required for kexec crash path. */
-GLOBAL(trap_nop)
+FUNC(trap_nop, 0)
         ENDBR64
         iretq
+END(trap_nop)
 
 /* Table of automatically generated entry points.  One per vector. */
         .pushsection .init.rodata, "a", @progbits
-GLOBAL(autogen_entrypoints)
+DATA(autogen_entrypoints, 8)
         /* pop into the .init.rodata section and record an entry point. */
         .macro entrypoint ent
         .pushsection .init.rodata, "a", @progbits
@@ -1139,7 +1166,7 @@ GLOBAL(autogen_entrypoints)
         .endm
 
         .popsection
-autogen_stubs: /* Automatically generated stubs. */
+FUNC_LOCAL(autogen_stubs, 0) /* Automatically generated stubs. */
 
         vec = 0
         .rept X86_NR_VECTORS
@@ -1183,6 +1210,7 @@ autogen_stubs: /* Automatically generate
 
         vec = vec + 1
         .endr
+END(autogen_stubs)
 
         .section .init.rodata, "a", @progbits
-        .size autogen_entrypoints, . - autogen_entrypoints
+END(autogen_entrypoints)

[PATCH v4 3/8] x86: also mark assembler globals hidden

[Jan Beulich]

Let's have assembler symbols be consistent with C ones. In principle
there are (a few) cases where gas can produce smaller code this way,
just that for now there's a gas bug causing smaller code to be emitted
even when that shouldn't be the case.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
---
v3: Re-base over generalization of the annotations.
v2: New.

--- a/xen/arch/x86/include/asm/config.h
+++ b/xen/arch/x86/include/asm/config.h
@@ -47,11 +47,11 @@
 #define CODE_FILL 0x90
 #define ALIGN .align CODE_ALIGN, CODE_FILL
 #define ENTRY(name)                             \
-  .globl name;                                  \
   ALIGN;                                        \
-  name:
+  GLOBAL(name)
 #define GLOBAL(name)                            \
   .globl name;                                  \
+  .hidden name;                                 \
   name:
 #endif
 
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -21,7 +21,7 @@
 
 #define SYM_ALIGN(algn...) .balign algn
 
-#define SYM_L_GLOBAL(name) .globl name
+#define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
 

[PATCH v4 4/8] Arm: annotate entry points with type and size

[Jan Beulich]

Use the generic framework in xen/linkage.h. No change in generated code
except for the changed padding value (noticable when config.gz isn't a
multiple of 4 in size). Plus of course the converted symbols change to
be hidden ones.

Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
use site wants the symbol global anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
Only one each of the assembly files is being converted for now. More
could be done right here or as follow-on in separate patches.

The ASM_INT() redundancy of .global will be eliminated by a subsequent
patch.
---
v3: New.

--- a/xen/arch/arm/arm32/lib/div64.S
+++ b/xen/arch/arm/arm32/lib/div64.S
@@ -42,7 +42,7 @@
  * Clobbered regs: xl, ip
  */
 
-ENTRY(__do_div64)
+FUNC(__do_div64)
 UNWIND(.fnstart)
 
 	@ Test for easy paths first.
@@ -206,4 +206,4 @@ Ldiv0_64:
 	ldr	pc, [sp], #8
 
 UNWIND(.fnend)
-ENDPROC(__do_div64)
+END(__do_div64)
--- a/xen/arch/arm/arm64/lib/clear_page.S
+++ b/xen/arch/arm/arm64/lib/clear_page.S
@@ -22,7 +22,7 @@
  * Parameters:
  *	x0 - dest
  */
-ENTRY(clear_page)
+FUNC(clear_page)
 	mrs	x1, dczid_el0
 	and	w1, w1, #0xf
 	mov	x2, #4
@@ -33,4 +33,4 @@ ENTRY(clear_page)
 	tst	x0, #(PAGE_SIZE - 1)
 	b.ne	1b
 	ret
-ENDPROC(clear_page)
+END(clear_page)
--- a/xen/arch/arm/include/asm/asm_defns.h
+++ b/xen/arch/arm/include/asm/asm_defns.h
@@ -5,6 +5,7 @@
 /* NB. Auto-generated from arch/.../asm-offsets.c */
 #include <asm/asm-offsets.h>
 #endif
+#include <xen/linkage.h>
 #include <asm/processor.h>
 
 /* Macros for generic assembly code */
@@ -28,10 +29,7 @@ label:  .asciz msg;
 .popsection
 
 #define ASM_INT(label, val)                 \
-    .p2align 2;                             \
-label: .long (val);                         \
-    .size label, . - label;                 \
-    .type label, %object
+    DATA(label, 4) .long (val); END(label)
 
 #endif /* __ARM_ASM_DEFNS_H__ */
 /*
--- a/xen/arch/arm/include/asm/config.h
+++ b/xen/arch/arm/include/asm/config.h
@@ -53,7 +53,8 @@
 
 /* Linkage for ARM */
 #ifdef __ASSEMBLY__
-#define ALIGN .align 2
+#define CODE_ALIGN 4
+#define ALIGN .balign CODE_ALIGN
 #define ENTRY(name)                             \
   .globl name;                                  \
   ALIGN;                                        \
@@ -61,8 +62,6 @@
 #define GLOBAL(name)                            \
   .globl name;                                  \
   name:
-#define END(name) \
-  .size name, .-name
 #define ENDPROC(name) \
   .type name, %function; \
   END(name)

[PATCH v4 5/8] RISC-V: annotate entry points with type and size

[Jan Beulich]

Use the generic framework in xen/linkage.h. No change in generated code
except of course the converted symbols change to be hidden ones and gain
a valid size.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
Probably count_args_exp() should move to macros.h, but I first wanted to
see whether anyone can suggest any better approach for checking whether
a defined macro expands to nothing.
---
v4: Also drop #undef-s from linker script.
v3: New.

--- a/xen/arch/riscv/entry.S
+++ b/xen/arch/riscv/entry.S
@@ -5,7 +5,7 @@
 #include <asm/traps.h>
 
 /* WIP: only works while interrupting Xen context */
-ENTRY(handle_trap)
+FUNC(handle_trap)
 
     /* Exceptions from xen */
 save_to_stack:
@@ -92,3 +92,4 @@ restore_registers:
         REG_L   sp, CPU_USER_REGS_SP(sp)
 
         sret
+END(handle_trap)
--- a/xen/arch/riscv/include/asm/asm.h
+++ b/xen/arch/riscv/include/asm/asm.h
@@ -7,6 +7,7 @@
 #define _ASM_RISCV_ASM_H
 
 #ifdef __ASSEMBLY__
+#include <xen/linkage.h>
 #define __ASM_STR(x)	x
 #else
 #define __ASM_STR(x)	#x
--- a/xen/arch/riscv/include/asm/config.h
+++ b/xen/arch/riscv/include/asm/config.h
@@ -69,12 +69,8 @@
 
 /* Linkage for RISCV */
 #ifdef __ASSEMBLY__
-#define ALIGN .align 4
-
-#define ENTRY(name)                                \
-  .globl name;                                     \
-  ALIGN;                                           \
-  name:
+#define CODE_ALIGN 16
+#define CODE_FILL /* empty */
 #endif
 
 #ifdef CONFIG_RISCV_64
--- a/xen/arch/riscv/riscv64/head.S
+++ b/xen/arch/riscv/riscv64/head.S
@@ -8,7 +8,7 @@
          *   a0 -> hart_id ( bootcpu_id )
          *   a1 -> dtb_base 
          */
-ENTRY(start)
+FUNC(start)
         /* Mask all interrupts */
         csrw    CSR_SIE, zero
 
@@ -30,13 +30,14 @@ ENTRY(start)
         jal     reset_stack
 
         tail    start_xen
+END(start)
 
         .section .text, "ax", %progbits
 
-ENTRY(reset_stack)
+FUNC(reset_stack)
         la      sp, cpu0_boot_stack
         li      t0, STACK_SIZE
         add     sp, sp, t0
 
         ret
-
+END(reset_stack)
--- a/xen/arch/riscv/xen.lds.S
+++ b/xen/arch/riscv/xen.lds.S
@@ -1,9 +1,6 @@
 #include <xen/lib.h>
 #include <xen/xen.lds.h>
 
-#undef ENTRY
-#undef ALIGN
-
 OUTPUT_ARCH(riscv)
 ENTRY(start)
 
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -37,17 +37,28 @@
 
 #define END(name) .size name, . - name
 
+/*
+ * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
+ * which case we also need to get rid of the comma in the .balign directive.
+ */
+#define count_args_exp(args...) count_args(args)
+#if count_args_exp(CODE_FILL)
+# define DO_CODE_ALIGN(algn...) LASTARG(CODE_ALIGN, ## algn), CODE_FILL
+#else
+# define DO_CODE_ALIGN(algn...) LASTARG(CODE_ALIGN, ## algn)
+#endif
+
 #define FUNC(name, algn...) \
-        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+        SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(algn))
 #define LABEL(name, algn...) \
-        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+        SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(algn))
 #define DATA(name, algn...) \
         SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
 
 #define FUNC_LOCAL(name, algn...) \
-        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+        SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(algn))
 #define LABEL_LOCAL(name, algn...) \
-        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
+        SYM(name, NONE, LOCAL, DO_CODE_ALIGN(algn))
 #define DATA_LOCAL(name, algn...) \
         SYM(name, DATA, LOCAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
 

[PATCH v4 5/8] PPC: switch entry point annotations to common model

[Jan Beulich]

Use the generic framework in xen/linkage.h. No change in generated code
except of course the converted symbol changes to be a hidden one.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v4: Also drop #undef-s from linker script. Re-base.
v3: New.

--- a/xen/arch/ppc/include/asm/asm-defns.h
+++ b/xen/arch/ppc/include/asm/asm-defns.h
@@ -2,6 +2,8 @@
 #ifndef _ASM_PPC_ASM_DEFNS_H
 #define _ASM_PPC_ASM_DEFNS_H
 
+#include <xen/linkage.h>
+
 /*
  * Load a 64-bit immediate value into the specified GPR.
  */
--- a/xen/arch/ppc/include/asm/config.h
+++ b/xen/arch/ppc/include/asm/config.h
@@ -31,12 +31,7 @@
 
 /* Linkage for PPC */
 #ifdef __ASSEMBLY__
-#define ALIGN .p2align 2
-
-#define ENTRY(name)                                                            \
-    .globl name;                                                               \
-    ALIGN;                                                                     \
-    name:
+#define CODE_ALIGN 4
 #endif
 
 #define XEN_VIRT_START _AT(UL, 0xc000000000000000)
--- a/xen/arch/ppc/ppc64/head.S
+++ b/xen/arch/ppc/ppc64/head.S
@@ -5,7 +5,7 @@
 
     .section .text.header, "ax", %progbits
 
-ENTRY(start)
+FUNC(start)
     /*
      * NOTE: argument registers (r3-r9) must be preserved until the C entrypoint
      */
@@ -36,6 +36,4 @@ ENTRY(start)
 
     /* should never return */
     trap
-
-    .size start, . - start
-    .type start, %function
+END(start)
--- a/xen/arch/ppc/ppc64/of-call.S
+++ b/xen/arch/ppc/ppc64/of-call.S
@@ -23,7 +23,7 @@
 
     .section .init.text, "ax", @progbits
 
-ENTRY(enter_of)
+FUNC(enter_of)
     mflr    %r0
     std     %r0, 16(%r1)
     stdu    %r1, -STACK_SWITCH_FRAME_SIZE(%r1) /* Save SP and create stack space */
@@ -78,6 +78,4 @@ ENTRY(enter_of)
     ld      %r0, 16(%r1)
     mtlr    %r0
     blr
-
-    .size enter_of, . - enter_of
-    .type enter_of, %function
+END(enter_of)
--- a/xen/arch/ppc/xen.lds.S
+++ b/xen/arch/ppc/xen.lds.S
@@ -1,9 +1,6 @@
 #include <xen/lib.h>
 #include <xen/xen.lds.h>
 
-#undef ENTRY
-#undef ALIGN
-
 OUTPUT_ARCH(powerpc:common64)
 ENTRY(start)
 

[PATCH v4 6/8] tools/binfile: switch to common annotations model

[Jan Beulich]

Use DATA() / END() and drop the now redundant .global. No change in
generated data; of course the two symbols now properly gain "hidden"
binding.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v3: New.

--- a/xen/tools/binfile
+++ b/xen/tools/binfile
@@ -29,15 +29,10 @@ cat <<EOF >$target
 
         .section $section.rodata, "a", %progbits
 
-        .p2align $align
-        .global $varname
-$varname:
+DATA($varname, 1 << $align)
         .incbin "$binsource"
 .Lend:
+END($varname)
 
-        .type $varname, %object
-        .size $varname, .Lend - $varname
-
-        .global ${varname}_size
         ASM_INT(${varname}_size, .Lend - $varname)
 EOF

[PATCH v4 8/8] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Jan Beulich]

Leverage the new infrastructure in xen/linkage.h to also switch to per-
function sections (when configured), deriving the specific name from the
"base" section in use at the time FUNC() is invoked.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
TBD: Since we use .subsection in UNLIKELY_START(), a perhaps not really
     wanted side effect of this change is that respective out-of-line
     code now moves much closer to its original (invoking) code.

TBD: Of course something with the same overall effect, but less
     impactful might do in Config.mk. E.g. $(filter-out -D%,$(3))
     instead of $(firstword (3)).

Note that we'd need to split DATA() in order to separate r/w and r/o
contributions. Further splitting might be needed to also support more
advanced attributes (e.g. merge), hence why this isn't done right here.
Sadly while a new section's name can be derived from the presently in
use, its attributes cannot be. Perhaps the only thing we can do is give
DATA() a 2nd mandatory parameter. Then again I guess most data
definitions could be moved to C anyway.
---
v4: Re-base.
v2: Make detection properly fail on old gas (by adjusting
    cc-option-add-closure).

--- a/Config.mk
+++ b/Config.mk
@@ -102,7 +102,7 @@ cc-option = $(shell if test -z "`echo 'v
 # Usage: $(call cc-option-add CFLAGS,CC,-march=winchip-c6)
 cc-option-add = $(eval $(call cc-option-add-closure,$(1),$(2),$(3)))
 define cc-option-add-closure
-    ifneq ($$(call cc-option,$$($(2)),$(3),n),n)
+    ifneq ($$(call cc-option,$$($(2)),$(firstword $(3)),n),n)
         $(1) += $(3)
     endif
 endef
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -407,6 +407,9 @@ AFLAGS += -D__ASSEMBLY__
 
 $(call cc-option-add,AFLAGS,CC,-Wa$(comma)--noexecstack)
 
+# Check to see whether the assmbler supports the --sectname-subst option.
+$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)
+
 LDFLAGS-$(call ld-option,--warn-rwx-segments) += --no-warn-rwx-segments
 
 CFLAGS += $(CFLAGS-y)
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -154,6 +154,9 @@ SECTIONS
   .init.text : {
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        _einittext = .;
        . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
        *(.altinstr_replacement)
--- a/xen/arch/ppc/xen.lds.S
+++ b/xen/arch/ppc/xen.lds.S
@@ -90,6 +90,9 @@ SECTIONS
     .init.text : {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/riscv/xen.lds.S
+++ b/xen/arch/riscv/xen.lds.S
@@ -89,6 +89,9 @@ SECTIONS
     .init.text : {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -86,6 +86,9 @@ SECTIONS
        . = ALIGN(PAGE_SIZE);
        _stextentry = .;
        *(.text.entry)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.text.entry.*)
+#endif
        . = ALIGN(PAGE_SIZE);
        _etextentry = .;
 
@@ -214,6 +217,9 @@ SECTIONS
 #endif
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        *(.text.startup)
        _einittext = .;
        /*
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -21,6 +21,14 @@
 
 #define SYM_ALIGN(algn...) .balign algn
 
+#if defined(HAVE_AS_SECTNAME_SUBST) && defined(CONFIG_CC_SPLIT_SECTIONS)
+# define SYM_PUSH_SECTION(name, attr) \
+         .pushsection %S.name, attr, %progbits; \
+         .equ .Lsplit_section, 1
+#else
+# define SYM_PUSH_SECTION(name, attr)
+#endif
+
 #define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
@@ -35,7 +43,14 @@
         SYM_ALIGN(algn);                          \
         name:
 
-#define END(name) .size name, . - name
+#define END(name) \
+        .size name, . - name; \
+        .ifdef .Lsplit_section; \
+            .if .Lsplit_section; \
+                .popsection; \
+                .equ .Lsplit_section, 0; \
+            .endif; \
+        .endif
 
 /*
  * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
@@ -49,6 +64,7 @@
 #endif
 
 #define FUNC(name, algn...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(algn))
 #define LABEL(name, algn...) \
         SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(algn))
@@ -56,6 +72,7 @@
         SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
 
 #define FUNC_LOCAL(name, algn...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(algn))
 #define LABEL_LOCAL(name, algn...) \
         SYM(name, NONE, LOCAL, DO_CODE_ALIGN(algn))

Re: [PATCH v4 0/8] annotate entry points with type and size

[Jan Beulich]

On 04.08.2023 08:24, Jan Beulich wrote:
> The model introduced in patch 1 is now arch-agnostic, and all arch-es
> are being switched at least partly (to at least give examples of how
> things will look like); PPC and RISC-V are still small enough to switch
> completely in one go.
> 
> 1: common: assembly entry point type/size annotations
> 2: x86: annotate entry points with type and size
> 3: x86: also mark assembler globals hidden
> 4: Arm: annotate entry points with type and size
> 5: RISC-V: annotate entry points with type and size
> 6: PPC: switch entry point annotations to common model
> 7: tools/binfile: switch to common annotations model

I'm sorry, I notice I screwed up with the numbering of patches 6 and 7.
I hope things are still clear enough.

Jan

Re: [PATCH v4 1/8] common: assembly entry point type/size annotations

[Julien Grall]

Hi Jan,

On 04/08/2023 07:26, Jan Beulich wrote:
> Recent gas versions generate minimalistic Dwarf debug info for items
> annotated as functions and having their sizes specified [1]. Furthermore
> generating live patches wants items properly annotated. "Borrow" Arm's
> END() and (remotely) derive other annotation infrastructure from
> Linux'es, for all architectures to use.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> 
> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
> ---
> v3: New, generalized from earlier x86-only version. LAST() (now
>      LASTARG()) moved to macros.h.
> ---
> TBD: What to set CODE_ALIGN to by default? Or should we requires arch-es
>       to define that in all cases?

The code alignment is very specific to an architecture. So I think it 
would be better if there are no default.

Otherwise, it will be more difficult for a developper to figure out that 
CODE_ALIGN may need an update.

> 
> TBD: {CODE,DATA}_ALIGN are byte granular, such that a value of 0 can be
>       specified (in case this has some special meaning on an arch;
>       conceivably it could mean to use some kind of arch default). We may
>       not strictly need that, and hence we could also make these power-of
>       -2 values (using .p2align).

I don't have a strong opinion on this one.

> 
> Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
> still have ALIGN.
> 
> Note further that FUNC()'s etc "algn" parameter is intended to allow for
> only no or a single argument. If we wanted to also make the fill value
> customizable per call site, the constructs would need re-doing to some
> degree.
> 
> --- /dev/null
> +++ b/xen/include/xen/linkage.h
> @@ -0,0 +1,56 @@
> +#ifndef __LINKAGE_H__
> +#define __LINKAGE_H__
> +
> +#ifdef __ASSEMBLY__
> +
> +#include <xen/macros.h>
> +
> +#ifndef CODE_ALIGN
> +# define CODE_ALIGN ??
> +#endif
> +#ifndef CODE_FILL
> +# define CODE_FILL ~0
> +#endif

What's the value to allow the architecture to override CODE_FILL and ...

> +
> +#ifndef DATA_ALIGN
> +# define DATA_ALIGN 0
> +#endif
> +#ifndef DATA_FILL
> +# define DATA_FILL ~0
> +#endif

... DATA_FILL?

> +
> +#define SYM_ALIGN(algn...) .balign algn

I find the name 'algn' confusing (not even referring to the missing 
'i'). Why not naming it 'args'?

> +
> +#define SYM_L_GLOBAL(name) .globl name
> +#define SYM_L_WEAK(name)   .weak name
> +#define SYM_L_LOCAL(name)  /* nothing */
> +
> +#define SYM_T_FUNC         STT_FUNC
> +#define SYM_T_DATA         STT_OBJECT
> +#define SYM_T_NONE         STT_NOTYPE

SYM_* will be used only in SYM() below. So why not using STT_* directly?

> +
> +#define SYM(name, typ, linkage, algn...)          \
> +        .type name, SYM_T_ ## typ;                \
> +        SYM_L_ ## linkage(name);                  \
> +        SYM_ALIGN(algn);                          \
> +        name:
> +
> +#define END(name) .size name, . - name
> +
> +#define FUNC(name, algn...) \
> +        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
> +#define LABEL(name, algn...) \
> +        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
> +#define DATA(name, algn...) \
> +        SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)

I think the alignment should be explicit for DATA. Otherwise, at least 
on Arm, we would default to 0 which could lead to unaligned access if 
not careful.

> +
> +#define FUNC_LOCAL(name, algn...) \
> +        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
> +#define LABEL_LOCAL(name, algn...) \
> +        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
> +#define DATA_LOCAL(name, algn...) \
> +        SYM(name, DATA, LOCAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)

Same here.

> +
> +#endif /*  __ASSEMBLY__ */
> +
> +#endif /* __LINKAGE_H__ */
> --- a/xen/include/xen/macros.h
> +++ b/xen/include/xen/macros.h
> @@ -15,6 +15,15 @@
>   #define count_args(args...) \
>       count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
>   
> +#define ARG1_(x, y...) (x)
> +#define ARG2_(x, y...) ARG1_(y)
> +#define ARG3_(x, y...) ARG2_(y)
> +#define ARG4_(x, y...) ARG3_(y)
> +
> +#define ARG__(nr) ARG ## nr ## _
> +#define ARG_(nr)  ARG__(nr)
> +#define LASTARG(x, y...) ARG_(count_args(x, ## y))(x, ## y)
> +
>   /* Indirect macros required for expanded argument pasting. */
>   #define PASTE_(a, b) a ## b
>   #define PASTE(a, b) PASTE_(a, b)
> 

Cheers,

-- 
Julien Grall

Re: [PATCH v4 4/8] Arm: annotate entry points with type and size

[Julien Grall]

Hi,

On 04/08/2023 07:28, Jan Beulich wrote:
> Use the generic framework in xen/linkage.h. No change in generated code
> except for the changed padding value (noticable when config.gz isn't a
> multiple of 4 in size). Plus of course the converted symbols change to
> be hidden ones.
> 
> Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
> use site wants the symbol global anyway.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Reviewed-by: Julien Grall <jgrall@amazon.com>

> ---
> Only one each of the assembly files is being converted for now. More
> could be done right here or as follow-on in separate patches.

I don't have a strong preference. Are you planning to do follow-up? (I 
am ok if it is no).

Cheers,

-- 
Julien Grall

Re: [PATCH v4 6/8] tools/binfile: switch to common annotations model

[Julien Grall]

Hi Jan,

On 04/08/2023 07:30, Jan Beulich wrote:
> Use DATA() / END() and drop the now redundant .global. No change in
> generated data; of course the two symbols now properly gain "hidden"
> binding.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Reviewed-by: Julien Grall <jgrall@amazon.com>

Cheers,

-- 
Julien Grall

Re: [PATCH v4 4/8] Arm: annotate entry points with type and size

[Jan Beulich]

On 14.09.2023 23:25, Julien Grall wrote:
> On 04/08/2023 07:28, Jan Beulich wrote:
>> Use the generic framework in xen/linkage.h. No change in generated code
>> except for the changed padding value (noticable when config.gz isn't a
>> multiple of 4 in size). Plus of course the converted symbols change to
>> be hidden ones.
>>
>> Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
>> use site wants the symbol global anyway.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> 
> Reviewed-by: Julien Grall <jgrall@amazon.com>

Thanks.

>> ---
>> Only one each of the assembly files is being converted for now. More
>> could be done right here or as follow-on in separate patches.
> 
> I don't have a strong preference. Are you planning to do follow-up? (I 
> am ok if it is no).

Well, I certainly can, but I wasn't expecting this series to remain pending
for this long, so time's running out for 4.18.

Jan

Re: [PATCH v4 1/8] common: assembly entry point type/size annotations

[Jan Beulich]

On 14.09.2023 23:06, Julien Grall wrote:
> On 04/08/2023 07:26, Jan Beulich wrote:
>> TBD: What to set CODE_ALIGN to by default? Or should we requires arch-es
>>       to define that in all cases?
> 
> The code alignment is very specific to an architecture. So I think it 
> would be better if there are no default.
> 
> Otherwise, it will be more difficult for a developper to figure out that 
> CODE_ALIGN may need an update.

Okay, I've dropped the fallback then.

>> --- /dev/null
>> +++ b/xen/include/xen/linkage.h
>> @@ -0,0 +1,56 @@
>> +#ifndef __LINKAGE_H__
>> +#define __LINKAGE_H__
>> +
>> +#ifdef __ASSEMBLY__
>> +
>> +#include <xen/macros.h>
>> +
>> +#ifndef CODE_ALIGN
>> +# define CODE_ALIGN ??
>> +#endif
>> +#ifndef CODE_FILL
>> +# define CODE_FILL ~0
>> +#endif
> 
> What's the value to allow the architecture to override CODE_FILL and ...

What is put between functions may be relevant to control. Without fall-
through to a subsequent label, I think the intention is to use "int3" (0xcc)
filler bytes, for example. (With fall-through to the subsequent label, NOPs
would need using in any event.)

>> +
>> +#ifndef DATA_ALIGN
>> +# define DATA_ALIGN 0
>> +#endif
>> +#ifndef DATA_FILL
>> +# define DATA_FILL ~0
>> +#endif
> 
> ... DATA_FILL?

For data the need is probably less strict; still I could see one arch to
prefer zero filling while another might better like all-ones-filling.

>> +
>> +#define SYM_ALIGN(algn...) .balign algn
> 
> I find the name 'algn' confusing (not even referring to the missing 
> 'i'). Why not naming it 'args'?

I can name it "args", sure. It's just that "algn" is in line with the
naming further down (where "args" isn't reasonable to use as substitution).

>> +#define SYM_L_GLOBAL(name) .globl name
>> +#define SYM_L_WEAK(name)   .weak name
>> +#define SYM_L_LOCAL(name)  /* nothing */
>> +
>> +#define SYM_T_FUNC         STT_FUNC
>> +#define SYM_T_DATA         STT_OBJECT
>> +#define SYM_T_NONE         STT_NOTYPE
> 
> SYM_* will be used only in SYM() below. So why not using STT_* directly?

For one this is how the Linux original has it. And then to me DATA and
NONE are neater to have at the use sites than the ELF-specific terms
OBJECT and NOTYPE. But I'm willing to reconsider provided arguments
towards the two given reasons not being overly relevant for us.

>> +
>> +#define SYM(name, typ, linkage, algn...)          \
>> +        .type name, SYM_T_ ## typ;                \
>> +        SYM_L_ ## linkage(name);                  \
>> +        SYM_ALIGN(algn);                          \
>> +        name:
>> +
>> +#define END(name) .size name, . - name
>> +
>> +#define FUNC(name, algn...) \
>> +        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
>> +#define LABEL(name, algn...) \
>> +        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
>> +#define DATA(name, algn...) \
>> +        SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
> 
> I think the alignment should be explicit for DATA. Otherwise, at least 
> on Arm, we would default to 0 which could lead to unaligned access if 
> not careful.

I disagree. Even for byte-granular data (like strings) it may be desirable
to have some default alignment, without every use site needing to repeat
that specific value.

Jan

Re: [PATCH v4 1/8] common: assembly entry point type/size annotations

[Julien Grall]

Hi,

On 18/09/2023 11:24, Jan Beulich wrote:
> On 14.09.2023 23:06, Julien Grall wrote:
>> On 04/08/2023 07:26, Jan Beulich wrote:
>>> TBD: What to set CODE_ALIGN to by default? Or should we requires arch-es
>>>        to define that in all cases?
>>
>> The code alignment is very specific to an architecture. So I think it
>> would be better if there are no default.
>>
>> Otherwise, it will be more difficult for a developper to figure out that
>> CODE_ALIGN may need an update.
> 
> Okay, I've dropped the fallback then.
> 
>>> --- /dev/null
>>> +++ b/xen/include/xen/linkage.h
>>> @@ -0,0 +1,56 @@
>>> +#ifndef __LINKAGE_H__
>>> +#define __LINKAGE_H__
>>> +
>>> +#ifdef __ASSEMBLY__
>>> +
>>> +#include <xen/macros.h>
>>> +
>>> +#ifndef CODE_ALIGN
>>> +# define CODE_ALIGN ??
>>> +#endif
>>> +#ifndef CODE_FILL
>>> +# define CODE_FILL ~0
>>> +#endif
>>
>> What's the value to allow the architecture to override CODE_FILL and ...
> 
> What is put between functions may be relevant to control. Without fall-
> through to a subsequent label, I think the intention is to use "int3" (0xcc)
> filler bytes, for example. (With fall-through to the subsequent label, NOPs
> would need using in any event.)

I guess for x86 it makes sense. For Arm, the filler is unlikely to be 
used as the instruction size is always fixed.

> 
>>> +
>>> +#ifndef DATA_ALIGN
>>> +# define DATA_ALIGN 0
>>> +#endif
>>> +#ifndef DATA_FILL
>>> +# define DATA_FILL ~0
>>> +#endif
>>
>> ... DATA_FILL?
> 
> For data the need is probably less strict; still I could see one arch to
> prefer zero filling while another might better like all-ones-filling.

It is unclear to me why an architecture would prefer one over the other. 
Can you provide a bit more details?

> 
>>> +
>>> +#define SYM_ALIGN(algn...) .balign algn
>>
>> I find the name 'algn' confusing (not even referring to the missing
>> 'i'). Why not naming it 'args'?
> 
> I can name it "args", sure. It's just that "algn" is in line with the
> naming further down (where "args" isn't reasonable to use as substitution).

If you want to be consistent then, I think it would be best to use 
'align'. I think it should be fine as we don't seem to use '.align'.

> 
>>> +#define SYM_L_GLOBAL(name) .globl name
>>> +#define SYM_L_WEAK(name)   .weak name
>>> +#define SYM_L_LOCAL(name)  /* nothing */
>>> +
>>> +#define SYM_T_FUNC         STT_FUNC
>>> +#define SYM_T_DATA         STT_OBJECT
>>> +#define SYM_T_NONE         STT_NOTYPE
>>
>> SYM_* will be used only in SYM() below. So why not using STT_* directly?
> 
> For one this is how the Linux original has it. And then to me DATA and
> NONE are neater to have at the use sites than the ELF-specific terms
> OBJECT and NOTYPE. But I'm willing to reconsider provided arguments
> towards the two given reasons not being overly relevant for us.
> 
>>> +
>>> +#define SYM(name, typ, linkage, algn...)          \
>>> +        .type name, SYM_T_ ## typ;                \
>>> +        SYM_L_ ## linkage(name);                  \
>>> +        SYM_ALIGN(algn);                          \
>>> +        name:
>>> +
>>> +#define END(name) .size name, . - name
>>> +
>>> +#define FUNC(name, algn...) \
>>> +        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
>>> +#define LABEL(name, algn...) \
>>> +        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
>>> +#define DATA(name, algn...) \
>>> +        SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
>>
>> I think the alignment should be explicit for DATA. Otherwise, at least
>> on Arm, we would default to 0 which could lead to unaligned access if
>> not careful.
> 
> I disagree. Even for byte-granular data (like strings) it may be desirable
> to have some default alignment, without every use site needing to repeat
> that specific value. 

I understand that some cases may want to use a default alignment. But my 
concern is the developer may not realize that alignment is necessary. So 
by making it mandatory, it would at least prompt the developper to think 
whether this is needed.

For the string case, we could introduce a different macro.

Cheers,

-- 
Julien Grall

Re: [PATCH v4 1/8] common: assembly entry point type/size annotations

[Jan Beulich]

On 18.09.2023 12:34, Julien Grall wrote:
> Hi,
> 
> On 18/09/2023 11:24, Jan Beulich wrote:
>> On 14.09.2023 23:06, Julien Grall wrote:
>>> On 04/08/2023 07:26, Jan Beulich wrote:
>>>> TBD: What to set CODE_ALIGN to by default? Or should we requires arch-es
>>>>        to define that in all cases?
>>>
>>> The code alignment is very specific to an architecture. So I think it
>>> would be better if there are no default.
>>>
>>> Otherwise, it will be more difficult for a developper to figure out that
>>> CODE_ALIGN may need an update.
>>
>> Okay, I've dropped the fallback then.
>>
>>>> --- /dev/null
>>>> +++ b/xen/include/xen/linkage.h
>>>> @@ -0,0 +1,56 @@
>>>> +#ifndef __LINKAGE_H__
>>>> +#define __LINKAGE_H__
>>>> +
>>>> +#ifdef __ASSEMBLY__
>>>> +
>>>> +#include <xen/macros.h>
>>>> +
>>>> +#ifndef CODE_ALIGN
>>>> +# define CODE_ALIGN ??
>>>> +#endif
>>>> +#ifndef CODE_FILL
>>>> +# define CODE_FILL ~0
>>>> +#endif
>>>
>>> What's the value to allow the architecture to override CODE_FILL and ...
>>
>> What is put between functions may be relevant to control. Without fall-
>> through to a subsequent label, I think the intention is to use "int3" (0xcc)
>> filler bytes, for example. (With fall-through to the subsequent label, NOPs
>> would need using in any event.)
> 
> I guess for x86 it makes sense. For Arm, the filler is unlikely to be 
> used as the instruction size is always fixed.
> 
>>
>>>> +
>>>> +#ifndef DATA_ALIGN
>>>> +# define DATA_ALIGN 0
>>>> +#endif
>>>> +#ifndef DATA_FILL
>>>> +# define DATA_FILL ~0
>>>> +#endif
>>>
>>> ... DATA_FILL?
>>
>> For data the need is probably less strict; still I could see one arch to
>> prefer zero filling while another might better like all-ones-filling.
> 
> It is unclear to me why an architecture would prefer one over the other. 
> Can you provide a bit more details?
> 
>>
>>>> +
>>>> +#define SYM_ALIGN(algn...) .balign algn
>>>
>>> I find the name 'algn' confusing (not even referring to the missing
>>> 'i'). Why not naming it 'args'?
>>
>> I can name it "args", sure. It's just that "algn" is in line with the
>> naming further down (where "args" isn't reasonable to use as substitution).
> 
> If you want to be consistent then, I think it would be best to use 
> 'align'. I think it should be fine as we don't seem to use '.align'.

I think I had a conflict from this somewhere, but that may have been very
early when I hadn't switched to .balign yet. I'll see if renaming works
out.

>>>> +#define SYM(name, typ, linkage, algn...)          \
>>>> +        .type name, SYM_T_ ## typ;                \
>>>> +        SYM_L_ ## linkage(name);                  \
>>>> +        SYM_ALIGN(algn);                          \
>>>> +        name:
>>>> +
>>>> +#define END(name) .size name, . - name
>>>> +
>>>> +#define FUNC(name, algn...) \
>>>> +        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
>>>> +#define LABEL(name, algn...) \
>>>> +        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## algn), CODE_FILL)
>>>> +#define DATA(name, algn...) \
>>>> +        SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## algn), DATA_FILL)
>>>
>>> I think the alignment should be explicit for DATA. Otherwise, at least
>>> on Arm, we would default to 0 which could lead to unaligned access if
>>> not careful.
>>
>> I disagree. Even for byte-granular data (like strings) it may be desirable
>> to have some default alignment, without every use site needing to repeat
>> that specific value. 
> 
> I understand that some cases may want to use a default alignment. But my 
> concern is the developer may not realize that alignment is necessary. So 
> by making it mandatory, it would at least prompt the developper to think 
> whether this is needed.

Forcing people to use a specific value every time, even when none would
be needed. Anyway, if others think your way, then I can certainly change.
But then I need to know whether others perhaps think alignment on functions
(and maybe even labels) should also be explicit in all cases.

> For the string case, we could introduce a different macro.

Hmm, yet one more special thing then (for people to remember to use under
certain circumstances).

Jan

[PATCH v5 0/8] annotate entry points with type and size

[Jan Beulich]

The model introduced in patch 1 is now arch-agnostic, and all arch-es
are being switched at least partly (to at least give examples of how
things will look like); PPC and RISC-V are still small enough to switch
completely in one go.

1: common: assembly entry point type/size annotations
2: x86: annotate entry points with type and size
3: x86: also mark assembler globals hidden
4: Arm: annotate entry points with type and size
5: RISC-V: annotate entry points with type and size
6: PPC: switch entry point annotations to common model
7: tools/binfile: switch to common annotations model
8: common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

Jan

[PATCH v5 1/8] common: assembly entry point type/size annotations

[Jan Beulich]

Recent gas versions generate minimalistic Dwarf debug info for items
annotated as functions and having their sizes specified [1]. Furthermore
generating live patches wants items properly annotated. "Borrow" Arm's
END() and (remotely) derive other annotation infrastructure from
Linux'es, for all architectures to use.

Signed-off-by: Jan Beulich <jbeulich@suse.com>

[1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
---
v5: Drop CODE_ALIGN fallback. s/algn/align/g.
v3: New, generalized from earlier x86-only version. LAST() (now
    LASTARG()) moved to macros.h.
---
TBD: {CODE,DATA}_ALIGN are byte granular, such that a value of 0 can be
     specified (in case this has some special meaning on an arch;
     conceivably it could mean to use some kind of arch default). We may
     not strictly need that, and hence we could also make these power-
     of-2 values (using .p2align).

Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
still have ALIGN.

Note further that FUNC()'s etc "align" parameter is intended to allow
for only no or a single argument. If we wanted to also make the fill
value customizable per call site, the constructs would need re-doing to
some degree.

--- /dev/null
+++ b/xen/include/xen/linkage.h
@@ -0,0 +1,54 @@
+#ifndef __LINKAGE_H__
+#define __LINKAGE_H__
+
+#ifdef __ASSEMBLY__
+
+#include <xen/macros.h>
+
+/* CODE_ALIGN needs to be specified by every architecture. */
+#ifndef CODE_FILL
+# define CODE_FILL ~0
+#endif
+
+#ifndef DATA_ALIGN
+# define DATA_ALIGN 0
+#endif
+#ifndef DATA_FILL
+# define DATA_FILL ~0
+#endif
+
+#define SYM_ALIGN(align...) .balign align
+
+#define SYM_L_GLOBAL(name) .globl name
+#define SYM_L_WEAK(name)   .weak name
+#define SYM_L_LOCAL(name)  /* nothing */
+
+#define SYM_T_FUNC         STT_FUNC
+#define SYM_T_DATA         STT_OBJECT
+#define SYM_T_NONE         STT_NOTYPE
+
+#define SYM(name, typ, linkage, align...)         \
+        .type name, SYM_T_ ## typ;                \
+        SYM_L_ ## linkage(name);                  \
+        SYM_ALIGN(align);                         \
+        name:
+
+#define END(name) .size name, . - name
+
+#define FUNC(name, align...) \
+        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
+#define LABEL(name, align...) \
+        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
+#define DATA(name, align...) \
+        SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
+
+#define FUNC_LOCAL(name, align...) \
+        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
+#define LABEL_LOCAL(name, align...) \
+        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
+#define DATA_LOCAL(name, align...) \
+        SYM(name, DATA, LOCAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
+
+#endif /*  __ASSEMBLY__ */
+
+#endif /* __LINKAGE_H__ */
--- a/xen/include/xen/macros.h
+++ b/xen/include/xen/macros.h
@@ -21,6 +21,15 @@
 #define count_args(args...) \
     count_args_(., ## args, 8, 7, 6, 5, 4, 3, 2, 1, 0)
 
+#define ARG1_(x, y...) (x)
+#define ARG2_(x, y...) ARG1_(y)
+#define ARG3_(x, y...) ARG2_(y)
+#define ARG4_(x, y...) ARG3_(y)
+
+#define ARG__(nr) ARG ## nr ## _
+#define ARG_(nr)  ARG__(nr)
+#define LASTARG(x, y...) ARG_(count_args(x, ## y))(x, ## y)
+
 /* Indirect macros required for expanded argument pasting. */
 #define PASTE_(a, b) a ## b
 #define PASTE(a, b) PASTE_(a, b)

[PATCH v5 2/8] x86: annotate entry points with type and size

[Jan Beulich]

Use the generic framework in xen/linkage.h.

For switch_to_kernel() and restore_all_guest() so far implicit alignment
(from being first in their respective sections) is being made explicit
(as in: using FUNC() without 2nd argument). Whereas for
{,compat}create_bounce_frame() and autogen_entrypoints[] alignment is
newly arranged for.

Except for the added/adjusted alignment padding (including their
knock-on effects) no change in generated code/data. Note that the basis
for support of weak definitions is added despite them not having any use
right now.

Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
use site wants the symbol global anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v5: Re-base.
v4: Correct simd_coprocessor_error's (now entry_XM) END(). Re-base.
v3: !PV variant of ret_from_intr is local. Introduction of macros split
    off to separate patch. Also adjust ASM_INT(). Re-base.
v2: Full rework.
---
Only two of the assembly files are being converted for now. More could
be done right here or as follow-on in separate patches.

Note that the FB-label in autogen_stubs() cannot be converted just yet:
Such labels cannot be used with .type. We could further diverge from
Linux'es model and avoid setting STT_NOTYPE explicitly (that's the type
labels get by default anyway).

The ASM_INT() redundancy of .global will be eliminated by a subsequent
patch.

I didn't think that I should make CODE_FILL evaluate to 0xCC right here;
IMO that wants to be a separate patch.

--- a/xen/arch/x86/include/asm/asm_defns.h
+++ b/xen/arch/x86/include/asm/asm_defns.h
@@ -13,6 +13,7 @@
 #include <asm/alternative.h>
 
 #ifdef __ASSEMBLY__
+#include <xen/linkage.h>
 #include <asm/asm-defns.h>
 #ifndef CONFIG_INDIRECT_THUNK
 .equ CONFIG_INDIRECT_THUNK, 0
@@ -343,10 +344,7 @@ static always_inline void stac(void)
     .popsection
 
 #define ASM_INT(label, val)                 \
-    .p2align 2;                             \
-label: .long (val);                         \
-    .size label, . - label;                 \
-    .type label, @object
+    DATA(label, 4) .long (val); END(label)
 
 #define ASM_CONSTANT(name, value)                \
     asm ( ".equ " #name ", %P0; .global " #name  \
--- a/xen/arch/x86/include/asm/config.h
+++ b/xen/arch/x86/include/asm/config.h
@@ -43,7 +43,9 @@
 
 /* Linkage for x86 */
 #ifdef __ASSEMBLY__
-#define ALIGN .align 16,0x90
+#define CODE_ALIGN 16
+#define CODE_FILL 0x90
+#define ALIGN .align CODE_ALIGN, CODE_FILL
 #define ENTRY(name)                             \
   .globl name;                                  \
   ALIGN;                                        \
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -11,7 +11,7 @@
 #include <public/xen.h>
 #include <irq_vectors.h>
 
-ENTRY(entry_int82)
+FUNC(entry_int82)
         ENDBR64
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $0
@@ -29,9 +29,10 @@ ENTRY(entry_int82)
 
         mov   %rsp, %rdi
         call  do_entry_int82
+END(entry_int82)
 
 /* %rbx: struct vcpu */
-ENTRY(compat_test_all_events)
+FUNC(compat_test_all_events)
         ASSERT_NOT_IN_ATOMIC
         cli                             # tests must not race interrupts
 /*compat_test_softirqs:*/
@@ -68,24 +69,21 @@ compat_test_guest_events:
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-compat_process_softirqs:
+LABEL_LOCAL(compat_process_softirqs)
         sti
         call  do_softirq
         jmp   compat_test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu, %rdx: struct trap_bounce */
-.Lcompat_process_trapbounce:
+LABEL_LOCAL(.Lcompat_process_trapbounce)
         sti
 .Lcompat_bounce_exception:
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
 
-	ALIGN
 /* %rbx: struct vcpu */
-compat_process_mce:
+LABEL_LOCAL(compat_process_mce)
         testb $1 << VCPU_TRAP_MCE,VCPU_async_exception_mask(%rbx)
         jnz   .Lcompat_test_guest_nmi
         sti
@@ -99,9 +97,8 @@ compat_process_mce:
         movb %dl,VCPU_async_exception_mask(%rbx)
         jmp   compat_process_trap
 
-	ALIGN
 /* %rbx: struct vcpu */
-compat_process_nmi:
+LABEL_LOCAL(compat_process_nmi)
         testb $1 << VCPU_TRAP_NMI,VCPU_async_exception_mask(%rbx)
         jnz   compat_test_guest_events
         sti
@@ -118,9 +115,10 @@ compat_process_trap:
         leaq  VCPU_trap_bounce(%rbx),%rdx
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_test_all_events)
 
 /* %rbx: struct vcpu, interrupts disabled */
-ENTRY(compat_restore_all_guest)
+FUNC(compat_restore_all_guest)
         ASSERT_INTERRUPTS_DISABLED
         mov   $~(X86_EFLAGS_IOPL | X86_EFLAGS_VM), %r11d
         and   UREGS_eflags(%rsp),%r11d
@@ -163,9 +161,10 @@ ENTRY(compat_restore_all_guest)
         RESTORE_ALL adj=8 compat=1
 .Lft0:  iretq
         _ASM_PRE_EXTABLE(.Lft0, handle_exception)
+END(compat_restore_all_guest)
 
 /* This mustn't modify registers other than %rax. */
-ENTRY(cr4_pv32_restore)
+FUNC(cr4_pv32_restore)
         push  %rdx
         GET_CPUINFO_FIELD(cr4, dx)
         mov   (%rdx), %rax
@@ -195,8 +194,9 @@ ENTRY(cr4_pv32_restore)
         pop   %rdx
         xor   %eax, %eax
         ret
+END(cr4_pv32_restore)
 
-ENTRY(compat_syscall)
+FUNC(compat_syscall)
         /* Fix up reported %cs/%ss for compat domains. */
         movl  $FLAT_COMPAT_USER_SS, UREGS_ss(%rsp)
         movl  $FLAT_COMPAT_USER_CS, UREGS_cs(%rsp)
@@ -224,8 +224,9 @@ UNLIKELY_END(compat_syscall_gpf)
         movw  %si,TRAPBOUNCE_cs(%rdx)
         movb  %cl,TRAPBOUNCE_flags(%rdx)
         jmp   .Lcompat_bounce_exception
+END(compat_syscall)
 
-ENTRY(compat_sysenter)
+FUNC(compat_sysenter)
         CR4_PV32_RESTORE
         movq  VCPU_trap_ctxt(%rbx),%rcx
         cmpb  $X86_EXC_GP, UREGS_entry_vector(%rsp)
@@ -238,17 +239,19 @@ ENTRY(compat_sysenter)
         movw  %ax,TRAPBOUNCE_cs(%rdx)
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_sysenter)
 
-ENTRY(compat_int80_direct_trap)
+FUNC(compat_int80_direct_trap)
         CR4_PV32_RESTORE
         call  compat_create_bounce_frame
         jmp   compat_test_all_events
+END(compat_int80_direct_trap)
 
 /* CREATE A BASIC EXCEPTION FRAME ON GUEST OS (RING-1) STACK:            */
 /*   {[ERRCODE,] EIP, CS, EFLAGS, [ESP, SS]}                             */
 /* %rdx: trap_bounce, %rbx: struct vcpu                                  */
 /* On return only %rbx and %rdx are guaranteed non-clobbered.            */
-compat_create_bounce_frame:
+FUNC_LOCAL(compat_create_bounce_frame)
         ASSERT_INTERRUPTS_ENABLED
         mov   %fs,%edi
         ALTERNATIVE "", stac, X86_FEATURE_XEN_SMAP
@@ -354,3 +357,4 @@ compat_crash_page_fault:
         jmp   .Lft14
 .previous
         _ASM_EXTABLE(.Lft14, .Lfx14)
+END(compat_create_bounce_frame)
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -24,7 +24,7 @@
 
 #ifdef CONFIG_PV
 /* %rbx: struct vcpu */
-switch_to_kernel:
+FUNC_LOCAL(switch_to_kernel)
         leaq  VCPU_trap_bounce(%rbx),%rdx
 
         /* TB_eip = 32-bit syscall ? syscall32_addr : syscall_addr */
@@ -89,24 +89,21 @@ test_guest_events:
         call  create_bounce_frame
         jmp   test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_softirqs:
+LABEL_LOCAL(process_softirqs)
         sti
         call do_softirq
         jmp  test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu, %rdx struct trap_bounce */
-.Lprocess_trapbounce:
+LABEL_LOCAL(.Lprocess_trapbounce)
         sti
 .Lbounce_exception:
         call  create_bounce_frame
         jmp   test_all_events
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_mce:
+LABEL_LOCAL(process_mce)
         testb $1 << VCPU_TRAP_MCE, VCPU_async_exception_mask(%rbx)
         jnz  .Ltest_guest_nmi
         sti
@@ -120,9 +117,8 @@ process_mce:
         movb %dl, VCPU_async_exception_mask(%rbx)
         jmp  process_trap
 
-        ALIGN
 /* %rbx: struct vcpu */
-process_nmi:
+LABEL_LOCAL(process_nmi)
         testb $1 << VCPU_TRAP_NMI, VCPU_async_exception_mask(%rbx)
         jnz  test_guest_events
         sti
@@ -139,11 +135,12 @@ process_trap:
         leaq VCPU_trap_bounce(%rbx), %rdx
         call create_bounce_frame
         jmp  test_all_events
+END(switch_to_kernel)
 
         .section .text.entry, "ax", @progbits
 
 /* %rbx: struct vcpu, interrupts disabled */
-restore_all_guest:
+FUNC_LOCAL(restore_all_guest)
         ASSERT_INTERRUPTS_DISABLED
 
         /* Stash guest SPEC_CTRL value while we can read struct vcpu. */
@@ -220,8 +217,7 @@ restore_all_guest:
         sysretq
 1:      sysretl
 
-        ALIGN
-.Lrestore_rcx_iret_exit_to_guest:
+LABEL_LOCAL(.Lrestore_rcx_iret_exit_to_guest)
         movq  8(%rsp), %rcx           # RIP
 /* No special register assumptions. */
 iret_exit_to_guest:
@@ -230,6 +226,7 @@ iret_exit_to_guest:
         addq  $8,%rsp
 .Lft0:  iretq
         _ASM_PRE_EXTABLE(.Lft0, handle_exception)
+END(restore_all_guest)
 
 /*
  * When entering SYSCALL from kernel mode:
@@ -246,7 +243,7 @@ iret_exit_to_guest:
  *  - Guest %rsp stored in %rax
  *  - Xen stack loaded, pointing at the %ss slot
  */
-ENTRY(lstar_enter)
+FUNC(lstar_enter)
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
 #endif
@@ -281,9 +278,10 @@ ENTRY(lstar_enter)
         mov   %rsp, %rdi
         call  pv_hypercall
         jmp   test_all_events
+END(lstar_enter)
 
 /* See lstar_enter for entry register state. */
-ENTRY(cstar_enter)
+FUNC(cstar_enter)
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
 #endif
@@ -321,8 +319,9 @@ ENTRY(cstar_enter)
         jne   compat_syscall
 #endif
         jmp   switch_to_kernel
+END(cstar_enter)
 
-ENTRY(sysenter_entry)
+FUNC(sysenter_entry)
         ENDBR64
 #ifdef CONFIG_XEN_SHSTK
         ALTERNATIVE "", "setssbsy", X86_FEATURE_XEN_SHSTK
@@ -330,7 +329,7 @@ ENTRY(sysenter_entry)
         pushq $FLAT_USER_SS
         pushq $0
         pushfq
-GLOBAL(sysenter_eflags_saved)
+LABEL(sysenter_eflags_saved, 0)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $3 /* ring 3 null cs */
         pushq $0 /* null rip */
@@ -384,8 +383,9 @@ UNLIKELY_END(sysenter_gpf)
         jne   compat_sysenter
 #endif
         jmp   .Lbounce_exception
+END(sysenter_entry)
 
-ENTRY(entry_int80)
+FUNC(entry_int80)
         ENDBR64
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         pushq $0
@@ -473,6 +473,7 @@ int80_slow_path:
          */
         GET_STACK_END(14)
         jmp   handle_exception_saved
+END(entry_int80)
 
         /* create_bounce_frame & helpers don't need to be in .text.entry */
         .text
@@ -481,7 +482,7 @@ int80_slow_path:
 /*   { RCX, R11, [ERRCODE,] RIP, CS, RFLAGS, RSP, SS }                   */
 /* %rdx: trap_bounce, %rbx: struct vcpu                                  */
 /* On return only %rbx and %rdx are guaranteed non-clobbered.            */
-create_bounce_frame:
+FUNC_LOCAL(create_bounce_frame)
         ASSERT_INTERRUPTS_ENABLED
         testb $TF_kernel_mode,VCPU_thread_flags(%rbx)
         jnz   1f
@@ -617,6 +618,7 @@ ENTRY(dom_crash_sync_extable)
         xorl  %edi,%edi
         jmp   asm_domain_crash_synchronous /* Does not return */
         .popsection
+END(create_bounce_frame)
 #endif /* CONFIG_PV */
 
 /* --- CODE BELOW THIS LINE (MOSTLY) NOT GUEST RELATED --- */
@@ -625,7 +627,7 @@ ENTRY(dom_crash_sync_extable)
 
 /* No special register assumptions. */
 #ifdef CONFIG_PV
-ENTRY(continue_pv_domain)
+FUNC(continue_pv_domain)
         ENDBR64
         call  check_wakeup_from_wait
 ret_from_intr:
@@ -640,26 +642,28 @@ ret_from_intr:
 #else
         jmp   test_all_events
 #endif
+END(continue_pv_domain)
 #else
-ret_from_intr:
+FUNC_LOCAL(ret_from_intr, 0)
         ASSERT_CONTEXT_IS_XEN
         jmp   restore_all_xen
+END(ret_from_intr)
 #endif
 
         .section .init.text, "ax", @progbits
-ENTRY(early_page_fault)
+FUNC(early_page_fault)
         ENDBR64
         movl  $X86_EXC_PF, 4(%rsp)
         SAVE_ALL
         movq  %rsp, %rdi
         call  do_early_page_fault
         jmp   restore_all_xen
+END(early_page_fault)
 
         .section .text.entry, "ax", @progbits
 
-        ALIGN
 /* %r12=ist_exit */
-restore_all_xen:
+FUNC_LOCAL(restore_all_xen)
 
 #ifdef CONFIG_DEBUG
         mov   %rsp, %rdi
@@ -683,8 +687,9 @@ UNLIKELY_END(exit_cr3)
 
         RESTORE_ALL adj=8
         iretq
+END(restore_all_xen)
 
-ENTRY(common_interrupt)
+FUNC(common_interrupt)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
 
@@ -713,12 +718,14 @@ ENTRY(common_interrupt)
         mov   %r15, STACK_CPUINFO_FIELD(xen_cr3)(%r14)
         mov   %bl, STACK_CPUINFO_FIELD(use_pv_cr3)(%r14)
         jmp ret_from_intr
+END(common_interrupt)
 
-ENTRY(entry_PF)
+FUNC(entry_PF)
         ENDBR64
         movl  $X86_EXC_PF, 4(%rsp)
+END(entry_PF)
 /* No special register assumptions. */
-GLOBAL(handle_exception)
+FUNC(handle_exception, 0)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
 
@@ -886,92 +893,108 @@ FATAL_exception_with_ints_disabled:
         xorl  %esi,%esi
         movq  %rsp,%rdi
         tailcall fatal_trap
+END(handle_exception)
 
-ENTRY(entry_DE)
+FUNC(entry_DE)
         ENDBR64
         pushq $0
         movl  $X86_EXC_DE, 4(%rsp)
         jmp   handle_exception
+END(entry_DE)
 
-ENTRY(entry_MF)
+FUNC(entry_MF)
         ENDBR64
         pushq $0
         movl  $X86_EXC_MF, 4(%rsp)
         jmp   handle_exception
+END(entry_MF)
 
-ENTRY(entry_XM)
+FUNC(entry_XM)
         ENDBR64
         pushq $0
         movl  $X86_EXC_XM, 4(%rsp)
         jmp   handle_exception
+END(entry_XM)
 
-ENTRY(entry_NM)
+FUNC(entry_NM)
         ENDBR64
         pushq $0
         movl  $X86_EXC_NM, 4(%rsp)
         jmp   handle_exception
+END(entry_NM)
 
-ENTRY(entry_DB)
+FUNC(entry_DB)
         ENDBR64
         pushq $0
         movl  $X86_EXC_DB, 4(%rsp)
         jmp   handle_ist_exception
+END(entry_DB)
 
-ENTRY(entry_BP)
+FUNC(entry_BP)
         ENDBR64
         pushq $0
         movl  $X86_EXC_BP, 4(%rsp)
         jmp   handle_exception
+END(entry_BP)
 
-ENTRY(entry_OF)
+FUNC(entry_OF)
         ENDBR64
         pushq $0
         movl  $X86_EXC_OF, 4(%rsp)
         jmp   handle_exception
+END(entry_OF)
 
-ENTRY(entry_BR)
+FUNC(entry_BR)
         ENDBR64
         pushq $0
         movl  $X86_EXC_BR, 4(%rsp)
         jmp   handle_exception
+END(entry_BR)
 
-ENTRY(entry_UD)
+FUNC(entry_UD)
         ENDBR64
         pushq $0
         movl  $X86_EXC_UD, 4(%rsp)
         jmp   handle_exception
+END(entry_UD)
 
-ENTRY(entry_TS)
+FUNC(entry_TS)
         ENDBR64
         movl  $X86_EXC_TS, 4(%rsp)
         jmp   handle_exception
+END(entry_TS)
 
-ENTRY(entry_NP)
+FUNC(entry_NP)
         ENDBR64
         movl  $X86_EXC_NP, 4(%rsp)
         jmp   handle_exception
+END(entry_NP)
 
-ENTRY(entry_SS)
+FUNC(entry_SS)
         ENDBR64
         movl  $X86_EXC_SS, 4(%rsp)
         jmp   handle_exception
+END(entry_SS)
 
-ENTRY(entry_GP)
+FUNC(entry_GP)
         ENDBR64
         movl  $X86_EXC_GP, 4(%rsp)
         jmp   handle_exception
+END(entry_GP)
 
-ENTRY(entry_AC)
+FUNC(entry_AC)
         ENDBR64
         movl  $X86_EXC_AC, 4(%rsp)
         jmp   handle_exception
+END(entry_AC)
 
-ENTRY(entry_CP)
+FUNC(entry_CP)
         ENDBR64
         movl  $X86_EXC_CP, 4(%rsp)
         jmp   handle_exception
+END(entry_CP)
 
-ENTRY(entry_DF)
+FUNC(entry_DF)
         ENDBR64
         movl  $X86_EXC_DF, 4(%rsp)
         /* Set AC to reduce chance of further SMAP faults */
@@ -994,8 +1017,9 @@ ENTRY(entry_DF)
 
         movq  %rsp,%rdi
         tailcall do_double_fault
+END(entry_DF)
 
-ENTRY(entry_NMI)
+FUNC(entry_NMI)
         ENDBR64
         pushq $0
         movl  $X86_EXC_NMI, 4(%rsp)
@@ -1126,21 +1150,24 @@ handle_ist_exception:
         ASSERT_CONTEXT_IS_XEN
         jmp   restore_all_xen
 #endif
+END(entry_NMI)
 
-ENTRY(entry_MC)
+FUNC(entry_MC)
         ENDBR64
         pushq $0
         movl  $X86_EXC_MC, 4(%rsp)
         jmp   handle_ist_exception
+END(entry_MC)
 
 /* No op trap handler.  Required for kexec crash path. */
-GLOBAL(trap_nop)
+FUNC(trap_nop, 0)
         ENDBR64
         iretq
+END(trap_nop)
 
 /* Table of automatically generated entry points.  One per vector. */
         .pushsection .init.rodata, "a", @progbits
-GLOBAL(autogen_entrypoints)
+DATA(autogen_entrypoints, 8)
         /* pop into the .init.rodata section and record an entry point. */
         .macro entrypoint ent
         .pushsection .init.rodata, "a", @progbits
@@ -1149,7 +1176,7 @@ GLOBAL(autogen_entrypoints)
         .endm
 
         .popsection
-autogen_stubs: /* Automatically generated stubs. */
+FUNC_LOCAL(autogen_stubs, 0) /* Automatically generated stubs. */
 
         vec = 0
         .rept X86_NR_VECTORS
@@ -1193,6 +1220,7 @@ autogen_stubs: /* Automatically generate
 
         vec = vec + 1
         .endr
+END(autogen_stubs)
 
         .section .init.rodata, "a", @progbits
-        .size autogen_entrypoints, . - autogen_entrypoints
+END(autogen_entrypoints)

[PATCH v5 3/8] x86: also mark assembler globals hidden

[Jan Beulich]

Let's have assembler symbols be consistent with C ones. In principle
there are (a few) cases where gas can produce smaller code this way,
just that for now there's a gas bug causing smaller code to be emitted
even when that shouldn't be the case.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
---
v5: Re-base over changes earlier in the series.
v3: Re-base over generalization of the annotations.
v2: New.

--- a/xen/arch/x86/include/asm/config.h
+++ b/xen/arch/x86/include/asm/config.h
@@ -47,11 +47,11 @@
 #define CODE_FILL 0x90
 #define ALIGN .align CODE_ALIGN, CODE_FILL
 #define ENTRY(name)                             \
-  .globl name;                                  \
   ALIGN;                                        \
-  name:
+  GLOBAL(name)
 #define GLOBAL(name)                            \
   .globl name;                                  \
+  .hidden name;                                 \
   name:
 #endif
 
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -19,7 +19,7 @@
 
 #define SYM_ALIGN(align...) .balign align
 
-#define SYM_L_GLOBAL(name) .globl name
+#define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
 

[PATCH v5 4/8] Arm: annotate entry points with type and size

[Jan Beulich]

Use the generic framework in xen/linkage.h. No change in generated code
except for the changed padding value (noticable when config.gz isn't a
multiple of 4 in size). Plus of course the converted symbols change to
be hidden ones.

Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
use site wants the symbol global anyway.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
---
Only one each of the assembly files is being converted for now. More
could be done right here or as follow-on in separate patches.

The ASM_INT() redundancy of .global will be eliminated by a subsequent
patch.
---
v3: New.

--- a/xen/arch/arm/arm32/lib/div64.S
+++ b/xen/arch/arm/arm32/lib/div64.S
@@ -42,7 +42,7 @@
  * Clobbered regs: xl, ip
  */
 
-ENTRY(__do_div64)
+FUNC(__do_div64)
 UNWIND(.fnstart)
 
 	@ Test for easy paths first.
@@ -206,4 +206,4 @@ Ldiv0_64:
 	ldr	pc, [sp], #8
 
 UNWIND(.fnend)
-ENDPROC(__do_div64)
+END(__do_div64)
--- a/xen/arch/arm/arm64/lib/clear_page.S
+++ b/xen/arch/arm/arm64/lib/clear_page.S
@@ -22,7 +22,7 @@
  * Parameters:
  *	x0 - dest
  */
-ENTRY(clear_page)
+FUNC(clear_page)
 	mrs	x1, dczid_el0
 	and	w1, w1, #0xf
 	mov	x2, #4
@@ -33,4 +33,4 @@ ENTRY(clear_page)
 	tst	x0, #(PAGE_SIZE - 1)
 	b.ne	1b
 	ret
-ENDPROC(clear_page)
+END(clear_page)
--- a/xen/arch/arm/include/asm/asm_defns.h
+++ b/xen/arch/arm/include/asm/asm_defns.h
@@ -5,6 +5,7 @@
 /* NB. Auto-generated from arch/.../asm-offsets.c */
 #include <asm/asm-offsets.h>
 #endif
+#include <xen/linkage.h>
 #include <asm/processor.h>
 
 /* Macros for generic assembly code */
@@ -30,10 +31,7 @@ label:  .asciz msg;
 #define RODATA_STR(label, msg) RODATA_SECT(.rodata.str, label, msg)
 
 #define ASM_INT(label, val)                 \
-    .p2align 2;                             \
-label: .long (val);                         \
-    .size label, . - label;                 \
-    .type label, %object
+    DATA(label, 4) .long (val); END(label)
 
 #endif /* __ARM_ASM_DEFNS_H__ */
 /*
--- a/xen/arch/arm/include/asm/config.h
+++ b/xen/arch/arm/include/asm/config.h
@@ -53,7 +53,8 @@
 
 /* Linkage for ARM */
 #ifdef __ASSEMBLY__
-#define ALIGN .align 2
+#define CODE_ALIGN 4
+#define ALIGN .balign CODE_ALIGN
 #define ENTRY(name)                             \
   .globl name;                                  \
   ALIGN;                                        \
@@ -61,8 +62,6 @@
 #define GLOBAL(name)                            \
   .globl name;                                  \
   name:
-#define END(name) \
-  .size name, .-name
 #define ENDPROC(name) \
   .type name, %function; \
   END(name)

[PATCH v5 5/8] RISC-V: annotate entry points with type and size

[Jan Beulich]

Use the generic framework in xen/linkage.h. No change in generated code
except of course the converted symbols change to be hidden ones and gain
a valid size.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
Probably count_args_exp() should move to macros.h, but I first wanted to
see whether anyone can suggest any better approach for checking whether
a defined macro expands to nothing.
---
v5: Re-base.
v4: Also drop #undef-s from linker script.
v3: New.

--- a/xen/arch/riscv/entry.S
+++ b/xen/arch/riscv/entry.S
@@ -5,7 +5,7 @@
 #include <asm/traps.h>
 
 /* WIP: only works while interrupting Xen context */
-ENTRY(handle_trap)
+FUNC(handle_trap)
 
     /* Exceptions from xen */
 save_to_stack:
@@ -92,3 +92,4 @@ restore_registers:
         REG_L   sp, CPU_USER_REGS_SP(sp)
 
         sret
+END(handle_trap)
--- a/xen/arch/riscv/include/asm/asm.h
+++ b/xen/arch/riscv/include/asm/asm.h
@@ -7,6 +7,7 @@
 #define _ASM_RISCV_ASM_H
 
 #ifdef __ASSEMBLY__
+#include <xen/linkage.h>
 #define __ASM_STR(x)	x
 #else
 #define __ASM_STR(x)	#x
--- a/xen/arch/riscv/include/asm/config.h
+++ b/xen/arch/riscv/include/asm/config.h
@@ -69,12 +69,8 @@
 
 /* Linkage for RISCV */
 #ifdef __ASSEMBLY__
-#define ALIGN .align 4
-
-#define ENTRY(name)                                \
-  .globl name;                                     \
-  ALIGN;                                           \
-  name:
+#define CODE_ALIGN 16
+#define CODE_FILL /* empty */
 #endif
 
 #ifdef CONFIG_RISCV_64
--- a/xen/arch/riscv/riscv64/head.S
+++ b/xen/arch/riscv/riscv64/head.S
@@ -8,7 +8,7 @@
          *   a0 -> hart_id ( bootcpu_id )
          *   a1 -> dtb_base 
          */
-ENTRY(start)
+FUNC(start)
         /* Mask all interrupts */
         csrw    CSR_SIE, zero
 
@@ -60,19 +60,21 @@ ENTRY(start)
         mv      a1, s1
 
         tail    start_xen
+END(start)
 
         .section .text, "ax", %progbits
 
-ENTRY(reset_stack)
+FUNC(reset_stack)
         la      sp, cpu0_boot_stack
         li      t0, STACK_SIZE
         add     sp, sp, t0
 
         ret
+END(reset_stack)
 
         .section .text.ident, "ax", %progbits
 
-ENTRY(turn_on_mmu)
+FUNC(turn_on_mmu)
         sfence.vma
 
         li      t0, RV_STAGE1_MODE
@@ -84,3 +86,4 @@ ENTRY(turn_on_mmu)
         csrw    CSR_SATP, t1
 
         jr      a0
+END(turn_on_mmu)
--- a/xen/arch/riscv/xen.lds.S
+++ b/xen/arch/riscv/xen.lds.S
@@ -1,9 +1,6 @@
 #include <xen/lib.h>
 #include <xen/xen.lds.h>
 
-#undef ENTRY
-#undef ALIGN
-
 OUTPUT_ARCH(riscv)
 ENTRY(start)
 
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -35,17 +35,28 @@
 
 #define END(name) .size name, . - name
 
+/*
+ * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
+ * which case we also need to get rid of the comma in the .balign directive.
+ */
+#define count_args_exp(args...) count_args(args)
+#if count_args_exp(CODE_FILL)
+# define DO_CODE_ALIGN(align...) LASTARG(CODE_ALIGN, ## align), CODE_FILL
+#else
+# define DO_CODE_ALIGN(align...) LASTARG(CODE_ALIGN, ## align)
+#endif
+
 #define FUNC(name, align...) \
-        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
+        SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(align))
 #define LABEL(name, align...) \
-        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
+        SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(align))
 #define DATA(name, align...) \
         SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
 
 #define FUNC_LOCAL(name, align...) \
-        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
+        SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(align))
 #define LABEL_LOCAL(name, align...) \
-        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
+        SYM(name, NONE, LOCAL, DO_CODE_ALIGN(align))
 #define DATA_LOCAL(name, align...) \
         SYM(name, DATA, LOCAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
 

[PATCH v5 6/8] PPC: switch entry point annotations to common model

[Jan Beulich]

Use the generic framework in xen/linkage.h. No change in generated code
except of course the converted symbols change to be hidden ones.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v5: Re-base.
v4: Also drop #undef-s from linker script. Re-base.
v3: New.

--- a/xen/arch/ppc/include/asm/asm-defns.h
+++ b/xen/arch/ppc/include/asm/asm-defns.h
@@ -3,6 +3,7 @@
 #define _ASM_PPC_ASM_DEFNS_H
 
 #include <asm/asm-offsets.h>
+#include <xen/linkage.h>
 
 /*
  * Load a 64-bit immediate value into the specified GPR.
--- a/xen/arch/ppc/include/asm/config.h
+++ b/xen/arch/ppc/include/asm/config.h
@@ -32,12 +32,7 @@
 
 /* Linkage for PPC */
 #ifdef __ASSEMBLY__
-#define ALIGN .p2align 2
-
-#define ENTRY(name)                                                            \
-    .globl name;                                                               \
-    ALIGN;                                                                     \
-    name:
+#define CODE_ALIGN 4
 #endif
 
 #define XEN_VIRT_START _AC(0xc000000000000000, UL)
--- a/xen/arch/ppc/ppc64/exceptions-asm.S
+++ b/xen/arch/ppc/ppc64/exceptions-asm.S
@@ -6,7 +6,7 @@
     .section .text.exceptions, "ax", %progbits
 
     /* Helper to dump CPU state to struct cpu_user_regs pointed to by r1. */
-ENTRY(exception_common)
+FUNC(exception_common)
     /*
      * Save GPRs 1-31. TODO: The value of %r1 has already been modified by the
      * ISR, so the value we save isn't the exact value we had on entry.
@@ -45,11 +45,10 @@ ENTRY(exception_common)
     stdu    %r0, -STACK_FRAME_OVERHEAD(%r1)
     bl      exception_handler
 
-    .size exception_common, . - exception_common
-    .type exception_common, %function
+    END(exception_common)
 
     /* Same as exception_common, but for exceptions that set HSRR{0,1} */
-ENTRY(h_exception_common)
+FUNC(h_exception_common)
     /*
      * Save GPRs 1-31. TODO: The value of %r1 has already been modified by the
      * ISR, so the value we save isn't the exact value we had on entry.
@@ -89,15 +88,14 @@ ENTRY(h_exception_common)
     stdu    %r0, -STACK_FRAME_OVERHEAD(%r1)
     bl      exception_handler
 
-    .size h_exception_common, . - h_exception_common
-    .type h_exception_common, %function
+    END(h_exception_common)
 
 /*
  * Declare an ISR for the provided exception that jumps to the specified handler
  */
 .macro ISR name, exc, handler
     . = (AIL_VECTOR_BASE - EXCEPTION_VECTORS_START) + \exc
-    ENTRY(\name)
+    FUNC(\name)
     /* TODO: switch stack */
 
     /* Reserve space for struct cpu_user_regs */
@@ -113,8 +111,7 @@ ENTRY(h_exception_common)
     /* Branch to common code */
     b       \handler
 
-    .size \name, . - \name
-    .type \name, %function
+    END(\name)
 .endm
 
 /*
--- a/xen/arch/ppc/ppc64/head.S
+++ b/xen/arch/ppc/ppc64/head.S
@@ -6,7 +6,7 @@
 
     .section .text.header, "ax", %progbits
 
-ENTRY(start)
+FUNC(start)
     /*
      * NOTE: argument registers (r3-r9) must be preserved until the C entrypoint
      */
@@ -64,11 +64,9 @@ ENTRY(start)
 
     /* should never return */
     trap
+END(start)
 
-    .size start, . - start
-    .type start, %function
-
-ENTRY(enable_mmu)
+FUNC(enable_mmu)
     mflr %r3
     mfmsr %r4
 
@@ -78,6 +76,4 @@ ENTRY(enable_mmu)
     mtsrr0 %r3 /* return to caller after MMU enable */
     mtsrr1 %r4
     rfid
-
-    .size enable_mmu, . - enable_mmu
-    .type enable_mmu, %function
+END(enable_mmu)
--- a/xen/arch/ppc/xen.lds.S
+++ b/xen/arch/ppc/xen.lds.S
@@ -1,9 +1,6 @@
 #include <xen/lib.h>
 #include <xen/xen.lds.h>
 
-#undef ENTRY
-#undef ALIGN
-
 OUTPUT_ARCH(powerpc:common64)
 ENTRY(start)
 

[PATCH v5 7/8] tools/binfile: switch to common annotations model

[Jan Beulich]

Use DATA() / END() and drop the now redundant .global. No change in
generated data; of course the two symbols now properly gain "hidden"
binding.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
---
v3: New.

--- a/xen/tools/binfile
+++ b/xen/tools/binfile
@@ -29,15 +29,10 @@ cat <<EOF >$target
 
         .section $section.rodata, "a", %progbits
 
-        .p2align $align
-        .global $varname
-$varname:
+DATA($varname, 1 << $align)
         .incbin "$binsource"
 .Lend:
+END($varname)
 
-        .type $varname, %object
-        .size $varname, .Lend - $varname
-
-        .global ${varname}_size
         ASM_INT(${varname}_size, .Lend - $varname)
 EOF

[PATCH v5 8/8] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Jan Beulich]

Leverage the new infrastructure in xen/linkage.h to also switch to per-
function sections (when configured), deriving the specific name from the
"base" section in use at the time FUNC() is invoked.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
TBD: Since we use .subsection in UNLIKELY_START(), a perhaps not really
     wanted side effect of this change is that respective out-of-line
     code now moves much closer to its original (invoking) code.

TBD: Of course something with the same overall effect, but less
     impactful might do in Config.mk. E.g. $(filter-out -D%,$(3))
     instead of $(firstword (3)).

TBD: On top of Roger's respective patch (for livepatch), also respect
     CONFIG_FUNCTION_ALIGNMENT.

Note that we'd need to split DATA() in order to separate r/w and r/o
contributions. Further splitting might be needed to also support more
advanced attributes (e.g. merge), hence why this isn't done right here.
Sadly while a new section's name can be derived from the presently in
use, its attributes cannot be. Perhaps the only thing we can do is give
DATA() a 2nd mandatory parameter. Then again I guess most data
definitions could be moved to C anyway.
---
v5: Re-base over changes earlier in the series.
v4: Re-base.
v2: Make detection properly fail on old gas (by adjusting
    cc-option-add-closure).

--- a/Config.mk
+++ b/Config.mk
@@ -102,7 +102,7 @@ cc-option = $(shell if $(1) $(2:-Wno-%=-
 # Usage: $(call cc-option-add CFLAGS,CC,-march=winchip-c6)
 cc-option-add = $(eval $(call cc-option-add-closure,$(1),$(2),$(3)))
 define cc-option-add-closure
-    ifneq ($$(call cc-option,$$($(2)),$(3),n),n)
+    ifneq ($$(call cc-option,$$($(2)),$(firstword $(3)),n),n)
         $(1) += $(3)
     endif
 endef
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -409,6 +409,9 @@ AFLAGS += -D__ASSEMBLY__
 
 $(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--noexecstack)
 
+# Check to see whether the assmbler supports the --sectname-subst option.
+$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)
+
 LDFLAGS-$(call ld-option,--warn-rwx-segments) += --no-warn-rwx-segments
 
 CFLAGS += $(CFLAGS-y)
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -156,6 +156,9 @@ SECTIONS
   .init.text : {
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        _einittext = .;
        . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
        *(.altinstr_replacement)
--- a/xen/arch/ppc/xen.lds.S
+++ b/xen/arch/ppc/xen.lds.S
@@ -104,6 +104,9 @@ SECTIONS
     .init.text : {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/riscv/xen.lds.S
+++ b/xen/arch/riscv/xen.lds.S
@@ -104,6 +104,9 @@ SECTIONS
     .init.text : {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -86,6 +86,9 @@ SECTIONS
        . = ALIGN(PAGE_SIZE);
        _stextentry = .;
        *(.text.entry)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.text.entry.*)
+#endif
        . = ALIGN(PAGE_SIZE);
        _etextentry = .;
 
@@ -214,6 +217,9 @@ SECTIONS
 #endif
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        *(.text.startup)
        _einittext = .;
        /*
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -19,6 +19,14 @@
 
 #define SYM_ALIGN(align...) .balign align
 
+#if defined(HAVE_AS_SECTNAME_SUBST) && defined(CONFIG_CC_SPLIT_SECTIONS)
+# define SYM_PUSH_SECTION(name, attr) \
+         .pushsection %S.name, attr, %progbits; \
+         .equ .Lsplit_section, 1
+#else
+# define SYM_PUSH_SECTION(name, attr)
+#endif
+
 #define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
@@ -33,7 +41,14 @@
         SYM_ALIGN(align);                         \
         name:
 
-#define END(name) .size name, . - name
+#define END(name) \
+        .size name, . - name; \
+        .ifdef .Lsplit_section; \
+            .if .Lsplit_section; \
+                .popsection; \
+                .equ .Lsplit_section, 0; \
+            .endif; \
+        .endif
 
 /*
  * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
@@ -47,6 +62,7 @@
 #endif
 
 #define FUNC(name, align...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(align))
 #define LABEL(name, align...) \
         SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(align))
@@ -54,6 +70,7 @@
         SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
 
 #define FUNC_LOCAL(name, align...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(align))
 #define LABEL_LOCAL(name, align...) \
         SYM(name, NONE, LOCAL, DO_CODE_ALIGN(align))

Re: [PATCH v5 5/8] RISC-V: annotate entry points with type and size

[Oleksii]

On Mon, 2024-01-15 at 15:37 +0100, Jan Beulich wrote:
> Use the generic framework in xen/linkage.h. No change in generated
> code
> except of course the converted symbols change to be hidden ones and
> gain
> a valid size.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> Probably count_args_exp() should move to macros.h, but I first wanted
> to
> see whether anyone can suggest any better approach for checking
> whether
> a defined macro expands to nothing.
> ---
The current one approach looks good to me.
Reviewed-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>

~ Oleksii

> v5: Re-base.
> v4: Also drop #undef-s from linker script.
> v3: New.
> 
> --- a/xen/arch/riscv/entry.S
> +++ b/xen/arch/riscv/entry.S
> @@ -5,7 +5,7 @@
>  #include <asm/traps.h>
>  
>  /* WIP: only works while interrupting Xen context */
> -ENTRY(handle_trap)
> +FUNC(handle_trap)
>  
>      /* Exceptions from xen */
>  save_to_stack:
> @@ -92,3 +92,4 @@ restore_registers:
>          REG_L   sp, CPU_USER_REGS_SP(sp)
>  
>          sret
> +END(handle_trap)
> --- a/xen/arch/riscv/include/asm/asm.h
> +++ b/xen/arch/riscv/include/asm/asm.h
> @@ -7,6 +7,7 @@
>  #define _ASM_RISCV_ASM_H
>  
>  #ifdef __ASSEMBLY__
> +#include <xen/linkage.h>
>  #define __ASM_STR(x)	x
>  #else
>  #define __ASM_STR(x)	#x
> --- a/xen/arch/riscv/include/asm/config.h
> +++ b/xen/arch/riscv/include/asm/config.h
> @@ -69,12 +69,8 @@
>  
>  /* Linkage for RISCV */
>  #ifdef __ASSEMBLY__
> -#define ALIGN .align 4
> -
> -#define ENTRY(name)                                \
> -  .globl name;                                     \
> -  ALIGN;                                           \
> -  name:
> +#define CODE_ALIGN 16
> +#define CODE_FILL /* empty */
>  #endif
>  
>  #ifdef CONFIG_RISCV_64
> --- a/xen/arch/riscv/riscv64/head.S
> +++ b/xen/arch/riscv/riscv64/head.S
> @@ -8,7 +8,7 @@
>           *   a0 -> hart_id ( bootcpu_id )
>           *   a1 -> dtb_base 
>           */
> -ENTRY(start)
> +FUNC(start)
>          /* Mask all interrupts */
>          csrw    CSR_SIE, zero
>  
> @@ -60,19 +60,21 @@ ENTRY(start)
>          mv      a1, s1
>  
>          tail    start_xen
> +END(start)
>  
>          .section .text, "ax", %progbits
>  
> -ENTRY(reset_stack)
> +FUNC(reset_stack)
>          la      sp, cpu0_boot_stack
>          li      t0, STACK_SIZE
>          add     sp, sp, t0
>  
>          ret
> +END(reset_stack)
>  
>          .section .text.ident, "ax", %progbits
>  
> -ENTRY(turn_on_mmu)
> +FUNC(turn_on_mmu)
>          sfence.vma
>  
>          li      t0, RV_STAGE1_MODE
> @@ -84,3 +86,4 @@ ENTRY(turn_on_mmu)
>          csrw    CSR_SATP, t1
>  
>          jr      a0
> +END(turn_on_mmu)
> --- a/xen/arch/riscv/xen.lds.S
> +++ b/xen/arch/riscv/xen.lds.S
> @@ -1,9 +1,6 @@
>  #include <xen/lib.h>
>  #include <xen/xen.lds.h>
>  
> -#undef ENTRY
> -#undef ALIGN
> -
>  OUTPUT_ARCH(riscv)
>  ENTRY(start)
>  
> --- a/xen/include/xen/linkage.h
> +++ b/xen/include/xen/linkage.h
> @@ -35,17 +35,28 @@
>  
>  #define END(name) .size name, . - name
>  
> +/*
> + * CODE_FILL in particular may need to expand to nothing (e.g. for
> RISC-V), in
> + * which case we also need to get rid of the comma in the .balign
> directive.
> + */
> +#define count_args_exp(args...) count_args(args)
> +#if count_args_exp(CODE_FILL)
> +# define DO_CODE_ALIGN(align...) LASTARG(CODE_ALIGN, ## align),
> CODE_FILL
> +#else
> +# define DO_CODE_ALIGN(align...) LASTARG(CODE_ALIGN, ## align)
> +#endif
> +
>  #define FUNC(name, align...) \
> -        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## align),
> CODE_FILL)
> +        SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(align))
>  #define LABEL(name, align...) \
> -        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## align),
> CODE_FILL)
> +        SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(align))
>  #define DATA(name, align...) \
>          SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## align),
> DATA_FILL)
>  
>  #define FUNC_LOCAL(name, align...) \
> -        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## align),
> CODE_FILL)
> +        SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(align))
>  #define LABEL_LOCAL(name, align...) \
> -        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## align),
> CODE_FILL)
> +        SYM(name, NONE, LOCAL, DO_CODE_ALIGN(align))
>  #define DATA_LOCAL(name, align...) \
>          SYM(name, DATA, LOCAL, LASTARG(DATA_ALIGN, ## align),
> DATA_FILL)
>  
> 

Re: [PATCH v5 1/8] common: assembly entry point type/size annotations

[Roger Pau Monné]

On Mon, Jan 15, 2024 at 03:34:05PM +0100, Jan Beulich wrote:
> Recent gas versions generate minimalistic Dwarf debug info for items
> annotated as functions and having their sizes specified [1]. Furthermore
> generating live patches wants items properly annotated. "Borrow" Arm's
> END() and (remotely) derive other annotation infrastructure from
> Linux'es, for all architectures to use.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>

> 
> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
> ---
> v5: Drop CODE_ALIGN fallback. s/algn/align/g.
> v3: New, generalized from earlier x86-only version. LAST() (now
>     LASTARG()) moved to macros.h.
> ---
> TBD: {CODE,DATA}_ALIGN are byte granular, such that a value of 0 can be
>      specified (in case this has some special meaning on an arch;
>      conceivably it could mean to use some kind of arch default). We may
>      not strictly need that, and hence we could also make these power-
>      of-2 values (using .p2align).
> 
> Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
> still have ALIGN.

SYM_ALIGN seems fine for the purpose here.

> 
> Note further that FUNC()'s etc "align" parameter is intended to allow
> for only no or a single argument. If we wanted to also make the fill
> value customizable per call site, the constructs would need re-doing to
> some degree.
> 
> --- /dev/null
> +++ b/xen/include/xen/linkage.h
> @@ -0,0 +1,54 @@
> +#ifndef __LINKAGE_H__
> +#define __LINKAGE_H__
> +
> +#ifdef __ASSEMBLY__
> +
> +#include <xen/macros.h>
> +
> +/* CODE_ALIGN needs to be specified by every architecture. */
> +#ifndef CODE_FILL
> +# define CODE_FILL ~0
> +#endif
> +
> +#ifndef DATA_ALIGN
> +# define DATA_ALIGN 0
> +#endif
> +#ifndef DATA_FILL
> +# define DATA_FILL ~0

I find the fills a bit odd, compared to what we use now (nops for x86
IIRC).

Thanks, Roger.

Re: [PATCH v5 1/8] common: assembly entry point type/size annotations

[Roger Pau Monné]

On Mon, Jan 15, 2024 at 03:34:05PM +0100, Jan Beulich wrote:
> Recent gas versions generate minimalistic Dwarf debug info for items
> annotated as functions and having their sizes specified [1]. Furthermore
> generating live patches wants items properly annotated. "Borrow" Arm's
> END() and (remotely) derive other annotation infrastructure from
> Linux'es, for all architectures to use.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> 
> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
> ---
> v5: Drop CODE_ALIGN fallback. s/algn/align/g.
> v3: New, generalized from earlier x86-only version. LAST() (now
>     LASTARG()) moved to macros.h.
> ---
> TBD: {CODE,DATA}_ALIGN are byte granular, such that a value of 0 can be
>      specified (in case this has some special meaning on an arch;
>      conceivably it could mean to use some kind of arch default). We may
>      not strictly need that, and hence we could also make these power-
>      of-2 values (using .p2align).
> 
> Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
> still have ALIGN.
> 
> Note further that FUNC()'s etc "align" parameter is intended to allow
> for only no or a single argument. If we wanted to also make the fill
> value customizable per call site, the constructs would need re-doing to
> some degree.
> 
> --- /dev/null
> +++ b/xen/include/xen/linkage.h
> @@ -0,0 +1,54 @@
> +#ifndef __LINKAGE_H__
> +#define __LINKAGE_H__
> +
> +#ifdef __ASSEMBLY__
> +
> +#include <xen/macros.h>
> +
> +/* CODE_ALIGN needs to be specified by every architecture. */
> +#ifndef CODE_FILL
> +# define CODE_FILL ~0
> +#endif
> +
> +#ifndef DATA_ALIGN
> +# define DATA_ALIGN 0
> +#endif
> +#ifndef DATA_FILL
> +# define DATA_FILL ~0
> +#endif
> +
> +#define SYM_ALIGN(align...) .balign align
> +
> +#define SYM_L_GLOBAL(name) .globl name
> +#define SYM_L_WEAK(name)   .weak name
> +#define SYM_L_LOCAL(name)  /* nothing */
> +
> +#define SYM_T_FUNC         STT_FUNC
> +#define SYM_T_DATA         STT_OBJECT
> +#define SYM_T_NONE         STT_NOTYPE
> +
> +#define SYM(name, typ, linkage, align...)         \
> +        .type name, SYM_T_ ## typ;                \
> +        SYM_L_ ## linkage(name);                  \
> +        SYM_ALIGN(align);                         \
> +        name:
> +
> +#define END(name) .size name, . - name
> +
> +#define FUNC(name, align...) \
> +        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
> +#define LABEL(name, align...) \
> +        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
> +#define DATA(name, align...) \
> +        SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
> +
> +#define FUNC_LOCAL(name, align...) \
> +        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
> +#define LABEL_LOCAL(name, align...) \
> +        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)

One thing that I've noticed while reviewing further patches, the usage
of CODE_ALIGN and CODE_FILL in LABEL_LOCAL() means that CODE_FILL must
always be a nop, or else the assembler will put garbage while padding
the symbol, and hence the preceding code will no longer fallthrough
into the label?

Looking further, LABEL_LOCAL() is always used when there's no
fallthrough, but it's IMO not obvious from the description here.

Thanks, Roger.

Re: [PATCH v5 1/8] common: assembly entry point type/size annotations

[Jan Beulich]

On 17.01.2024 18:02, Roger Pau Monné wrote:
> On Mon, Jan 15, 2024 at 03:34:05PM +0100, Jan Beulich wrote:
>> Recent gas versions generate minimalistic Dwarf debug info for items
>> annotated as functions and having their sizes specified [1]. Furthermore
>> generating live patches wants items properly annotated. "Borrow" Arm's
>> END() and (remotely) derive other annotation infrastructure from
>> Linux'es, for all architectures to use.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> 
> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>

Thanks.

>> --- /dev/null
>> +++ b/xen/include/xen/linkage.h
>> @@ -0,0 +1,54 @@
>> +#ifndef __LINKAGE_H__
>> +#define __LINKAGE_H__
>> +
>> +#ifdef __ASSEMBLY__
>> +
>> +#include <xen/macros.h>
>> +
>> +/* CODE_ALIGN needs to be specified by every architecture. */
>> +#ifndef CODE_FILL
>> +# define CODE_FILL ~0
>> +#endif
>> +
>> +#ifndef DATA_ALIGN
>> +# define DATA_ALIGN 0
>> +#endif
>> +#ifndef DATA_FILL
>> +# define DATA_FILL ~0
> 
> I find the fills a bit odd, compared to what we use now (nops for x86
> IIRC).

Well, these are generic defaults. X86 then overrides CODE_FILL for it
to remain NOP. ~0 is the best I can think of as an arch-agnostic default,
considering the half dozen architectures I know at least a little.

Jan

Re: [PATCH v5 1/8] common: assembly entry point type/size annotations

[Jan Beulich]

On 18.01.2024 15:52, Roger Pau Monné wrote:
> On Mon, Jan 15, 2024 at 03:34:05PM +0100, Jan Beulich wrote:
>> Recent gas versions generate minimalistic Dwarf debug info for items
>> annotated as functions and having their sizes specified [1]. Furthermore
>> generating live patches wants items properly annotated. "Borrow" Arm's
>> END() and (remotely) derive other annotation infrastructure from
>> Linux'es, for all architectures to use.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>
>> [1] https://sourceware.org/git?p=binutils-gdb.git;a=commitdiff;h=591cc9fbbfd6d51131c0f1d4a92e7893edcc7a28
>> ---
>> v5: Drop CODE_ALIGN fallback. s/algn/align/g.
>> v3: New, generalized from earlier x86-only version. LAST() (now
>>     LASTARG()) moved to macros.h.
>> ---
>> TBD: {CODE,DATA}_ALIGN are byte granular, such that a value of 0 can be
>>      specified (in case this has some special meaning on an arch;
>>      conceivably it could mean to use some kind of arch default). We may
>>      not strictly need that, and hence we could also make these power-
>>      of-2 values (using .p2align).
>>
>> Note that we can't use ALIGN() (in place of SYM_ALIGN()) as long as we
>> still have ALIGN.
>>
>> Note further that FUNC()'s etc "align" parameter is intended to allow
>> for only no or a single argument. If we wanted to also make the fill
>> value customizable per call site, the constructs would need re-doing to
>> some degree.
>>
>> --- /dev/null
>> +++ b/xen/include/xen/linkage.h
>> @@ -0,0 +1,54 @@
>> +#ifndef __LINKAGE_H__
>> +#define __LINKAGE_H__
>> +
>> +#ifdef __ASSEMBLY__
>> +
>> +#include <xen/macros.h>
>> +
>> +/* CODE_ALIGN needs to be specified by every architecture. */
>> +#ifndef CODE_FILL
>> +# define CODE_FILL ~0
>> +#endif
>> +
>> +#ifndef DATA_ALIGN
>> +# define DATA_ALIGN 0
>> +#endif
>> +#ifndef DATA_FILL
>> +# define DATA_FILL ~0
>> +#endif
>> +
>> +#define SYM_ALIGN(align...) .balign align
>> +
>> +#define SYM_L_GLOBAL(name) .globl name
>> +#define SYM_L_WEAK(name)   .weak name
>> +#define SYM_L_LOCAL(name)  /* nothing */
>> +
>> +#define SYM_T_FUNC         STT_FUNC
>> +#define SYM_T_DATA         STT_OBJECT
>> +#define SYM_T_NONE         STT_NOTYPE
>> +
>> +#define SYM(name, typ, linkage, align...)         \
>> +        .type name, SYM_T_ ## typ;                \
>> +        SYM_L_ ## linkage(name);                  \
>> +        SYM_ALIGN(align);                         \
>> +        name:
>> +
>> +#define END(name) .size name, . - name
>> +
>> +#define FUNC(name, align...) \
>> +        SYM(name, FUNC, GLOBAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
>> +#define LABEL(name, align...) \
>> +        SYM(name, NONE, GLOBAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
>> +#define DATA(name, align...) \
>> +        SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
>> +
>> +#define FUNC_LOCAL(name, align...) \
>> +        SYM(name, FUNC, LOCAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
>> +#define LABEL_LOCAL(name, align...) \
>> +        SYM(name, NONE, LOCAL, LASTARG(CODE_ALIGN, ## align), CODE_FILL)
> 
> One thing that I've noticed while reviewing further patches, the usage
> of CODE_ALIGN and CODE_FILL in LABEL_LOCAL() means that CODE_FILL must
> always be a nop, or else the assembler will put garbage while padding
> the symbol, and hence the preceding code will no longer fallthrough
> into the label?

Well, except when an arch has no such cases, it'll need to override
CODE_FILL. Hence why for now Arm and PPC architectures get away without
such an override. It may well be that at least Arm will need to gain
one as soon as the first case of falling through is converted to this
new model. See also the RISC-V change, where it becomes permissible for
CODE_FILL to expand to nothing (thus using assembler built-in defaults).

> Looking further, LABEL_LOCAL() is always used when there's no
> fallthrough, but it's IMO not obvious from the description here.

Not sure what adjustment to the description you are thinking of. What's
used where isn't dictated by this patch / framework.

Jan

Re: [PATCH v5 2/8] x86: annotate entry points with type and size

[Roger Pau Monné]

On Mon, Jan 15, 2024 at 03:34:56PM +0100, Jan Beulich wrote:
> @@ -625,7 +627,7 @@ ENTRY(dom_crash_sync_extable)
>  
>  /* No special register assumptions. */
>  #ifdef CONFIG_PV
> -ENTRY(continue_pv_domain)
> +FUNC(continue_pv_domain)
>          ENDBR64
>          call  check_wakeup_from_wait
>  ret_from_intr:
> @@ -640,26 +642,28 @@ ret_from_intr:
>  #else
>          jmp   test_all_events
>  #endif
> +END(continue_pv_domain)
>  #else
> -ret_from_intr:
> +FUNC_LOCAL(ret_from_intr, 0)

Why does this need to have an alignment of 0? There's no fallthrough
of previous code AFAICT.

>          ASSERT_CONTEXT_IS_XEN
>          jmp   restore_all_xen
> +END(ret_from_intr)
>  #endif
>  
>          .section .init.text, "ax", @progbits
> -ENTRY(early_page_fault)
> +FUNC(early_page_fault)
>          ENDBR64
>          movl  $X86_EXC_PF, 4(%rsp)
>          SAVE_ALL
>          movq  %rsp, %rdi
>          call  do_early_page_fault
>          jmp   restore_all_xen
> +END(early_page_fault)
>  
>          .section .text.entry, "ax", @progbits
>  
> -        ALIGN
>  /* %r12=ist_exit */
> -restore_all_xen:
> +FUNC_LOCAL(restore_all_xen)
>  
>  #ifdef CONFIG_DEBUG
>          mov   %rsp, %rdi
> @@ -683,8 +687,9 @@ UNLIKELY_END(exit_cr3)
>  
>          RESTORE_ALL adj=8
>          iretq
> +END(restore_all_xen)
>  
> -ENTRY(common_interrupt)
> +FUNC(common_interrupt)
>          ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
>          SAVE_ALL
>  
> @@ -713,12 +718,14 @@ ENTRY(common_interrupt)
>          mov   %r15, STACK_CPUINFO_FIELD(xen_cr3)(%r14)
>          mov   %bl, STACK_CPUINFO_FIELD(use_pv_cr3)(%r14)
>          jmp ret_from_intr
> +END(common_interrupt)
>  
> -ENTRY(entry_PF)
> +FUNC(entry_PF)
>          ENDBR64
>          movl  $X86_EXC_PF, 4(%rsp)
> +END(entry_PF)
>  /* No special register assumptions. */
> -GLOBAL(handle_exception)
> +FUNC(handle_exception, 0)

Given patch 8/8 that enables support for placing FUNC() into separate
sections, the fallthrough arrangement here with entry_PF is no longer
guaranteed, as the linker could re-order the sections and thus
entry_PF could fallthrough into another text section?

IOW: entry_PF needs a "jmp handle_exception", and then
handle_exception itself can be padded as required by the default
alignment?

>          ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
>          SAVE_ALL
>  
> @@ -886,92 +893,108 @@ FATAL_exception_with_ints_disabled:
>          xorl  %esi,%esi
>          movq  %rsp,%rdi
>          tailcall fatal_trap
> +END(handle_exception)
>  
> -ENTRY(entry_DE)
> +FUNC(entry_DE)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_DE, 4(%rsp)
>          jmp   handle_exception
> +END(entry_DE)
>  
> -ENTRY(entry_MF)
> +FUNC(entry_MF)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_MF, 4(%rsp)
>          jmp   handle_exception
> +END(entry_MF)
>  
> -ENTRY(entry_XM)
> +FUNC(entry_XM)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_XM, 4(%rsp)
>          jmp   handle_exception
> +END(entry_XM)
>  
> -ENTRY(entry_NM)
> +FUNC(entry_NM)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_NM, 4(%rsp)
>          jmp   handle_exception
> +END(entry_NM)
>  
> -ENTRY(entry_DB)
> +FUNC(entry_DB)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_DB, 4(%rsp)
>          jmp   handle_ist_exception
> +END(entry_DB)
>  
> -ENTRY(entry_BP)
> +FUNC(entry_BP)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_BP, 4(%rsp)
>          jmp   handle_exception
> +END(entry_BP)
>  
> -ENTRY(entry_OF)
> +FUNC(entry_OF)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_OF, 4(%rsp)
>          jmp   handle_exception
> +END(entry_OF)
>  
> -ENTRY(entry_BR)
> +FUNC(entry_BR)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_BR, 4(%rsp)
>          jmp   handle_exception
> +END(entry_BR)
>  
> -ENTRY(entry_UD)
> +FUNC(entry_UD)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_UD, 4(%rsp)
>          jmp   handle_exception
> +END(entry_UD)
>  
> -ENTRY(entry_TS)
> +FUNC(entry_TS)
>          ENDBR64
>          movl  $X86_EXC_TS, 4(%rsp)
>          jmp   handle_exception
> +END(entry_TS)
>  
> -ENTRY(entry_NP)
> +FUNC(entry_NP)
>          ENDBR64
>          movl  $X86_EXC_NP, 4(%rsp)
>          jmp   handle_exception
> +END(entry_NP)
>  
> -ENTRY(entry_SS)
> +FUNC(entry_SS)
>          ENDBR64
>          movl  $X86_EXC_SS, 4(%rsp)
>          jmp   handle_exception
> +END(entry_SS)
>  
> -ENTRY(entry_GP)
> +FUNC(entry_GP)
>          ENDBR64
>          movl  $X86_EXC_GP, 4(%rsp)
>          jmp   handle_exception
> +END(entry_GP)
>  
> -ENTRY(entry_AC)
> +FUNC(entry_AC)
>          ENDBR64
>          movl  $X86_EXC_AC, 4(%rsp)
>          jmp   handle_exception
> +END(entry_AC)
>  
> -ENTRY(entry_CP)
> +FUNC(entry_CP)
>          ENDBR64
>          movl  $X86_EXC_CP, 4(%rsp)
>          jmp   handle_exception
> +END(entry_CP)
>  
> -ENTRY(entry_DF)
> +FUNC(entry_DF)
>          ENDBR64
>          movl  $X86_EXC_DF, 4(%rsp)
>          /* Set AC to reduce chance of further SMAP faults */
> @@ -994,8 +1017,9 @@ ENTRY(entry_DF)
>  
>          movq  %rsp,%rdi
>          tailcall do_double_fault
> +END(entry_DF)
>  
> -ENTRY(entry_NMI)
> +FUNC(entry_NMI)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_NMI, 4(%rsp)
> @@ -1126,21 +1150,24 @@ handle_ist_exception:
>          ASSERT_CONTEXT_IS_XEN
>          jmp   restore_all_xen
>  #endif
> +END(entry_NMI)
>  
> -ENTRY(entry_MC)
> +FUNC(entry_MC)
>          ENDBR64
>          pushq $0
>          movl  $X86_EXC_MC, 4(%rsp)
>          jmp   handle_ist_exception
> +END(entry_MC)
>  
>  /* No op trap handler.  Required for kexec crash path. */
> -GLOBAL(trap_nop)
> +FUNC(trap_nop, 0)

Could this use the default alignment?

>          ENDBR64
>          iretq
> +END(trap_nop)
>  
>  /* Table of automatically generated entry points.  One per vector. */
>          .pushsection .init.rodata, "a", @progbits
> -GLOBAL(autogen_entrypoints)
> +DATA(autogen_entrypoints, 8)
>          /* pop into the .init.rodata section and record an entry point. */
>          .macro entrypoint ent
>          .pushsection .init.rodata, "a", @progbits
> @@ -1149,7 +1176,7 @@ GLOBAL(autogen_entrypoints)
>          .endm
>  
>          .popsection
> -autogen_stubs: /* Automatically generated stubs. */
> +FUNC_LOCAL(autogen_stubs, 0) /* Automatically generated stubs. */

Won't it be good to align the stubs?  As that's possible to make them
faster?

Thanks, Roger.

Re: [PATCH v5 2/8] x86: annotate entry points with type and size

[Jan Beulich]

On 18.01.2024 18:45, Roger Pau Monné wrote:
> On Mon, Jan 15, 2024 at 03:34:56PM +0100, Jan Beulich wrote:
>> @@ -625,7 +627,7 @@ ENTRY(dom_crash_sync_extable)
>>  
>>  /* No special register assumptions. */
>>  #ifdef CONFIG_PV
>> -ENTRY(continue_pv_domain)
>> +FUNC(continue_pv_domain)
>>          ENDBR64
>>          call  check_wakeup_from_wait
>>  ret_from_intr:
>> @@ -640,26 +642,28 @@ ret_from_intr:
>>  #else
>>          jmp   test_all_events
>>  #endif
>> +END(continue_pv_domain)
>>  #else
>> -ret_from_intr:
>> +FUNC_LOCAL(ret_from_intr, 0)
> 
> Why does this need to have an alignment of 0? There's no fallthrough
> of previous code AFAICT.

It doesn't have to, but see the description for where I thought it would
make sense to newly introduce alignment; I simply didn't want to go too
far with such changes leading to generated code being altered. This (and
the other cases below) weren't in that group. Without ...

>>          ASSERT_CONTEXT_IS_XEN

... this I would be strongly inclined to switch ...

>>          jmp   restore_all_xen

... to

#define ret_from_intr restore_all_xen

anyway. And perhaps we ought to change the "#else" above to
"#elif !defined(NDEBUG)", at which point I'd say alignment isn't required
here at all.

>> @@ -713,12 +718,14 @@ ENTRY(common_interrupt)
>>          mov   %r15, STACK_CPUINFO_FIELD(xen_cr3)(%r14)
>>          mov   %bl, STACK_CPUINFO_FIELD(use_pv_cr3)(%r14)
>>          jmp ret_from_intr
>> +END(common_interrupt)
>>  
>> -ENTRY(entry_PF)
>> +FUNC(entry_PF)
>>          ENDBR64
>>          movl  $X86_EXC_PF, 4(%rsp)
>> +END(entry_PF)
>>  /* No special register assumptions. */
>> -GLOBAL(handle_exception)
>> +FUNC(handle_exception, 0)
> 
> Given patch 8/8 that enables support for placing FUNC() into separate
> sections, the fallthrough arrangement here with entry_PF is no longer
> guaranteed, as the linker could re-order the sections and thus
> entry_PF could fallthrough into another text section?
> 
> IOW: entry_PF needs a "jmp handle_exception", and then
> handle_exception itself can be padded as required by the default
> alignment?

Oh, yes, very much so. Thanks for noticing. I'll do that in the later
patch, though.

>> @@ -1149,7 +1176,7 @@ GLOBAL(autogen_entrypoints)
>>          .endm
>>  
>>          .popsection
>> -autogen_stubs: /* Automatically generated stubs. */
>> +FUNC_LOCAL(autogen_stubs, 0) /* Automatically generated stubs. */
> 
> Won't it be good to align the stubs?  As that's possible to make them
> faster?

Well. If I used default alignment here, it would be the 1st stub only
which gains alignment. I'd view that as simply inconsistent. You'll
find there already is an ALIGN inside the .rept below. That covers
only certain cases, but intentionally so, I believe: it's only entry
points which shouldn't be reached anyway which get no alignment. So
yes, in this case I clearly think there wants to explicitly be no
alignment here.

Jan

Re: [PATCH v5 2/8] x86: annotate entry points with type and size

[Roger Pau Monné]

On Mon, Jan 15, 2024 at 03:34:56PM +0100, Jan Beulich wrote:
> Use the generic framework in xen/linkage.h.
> 
> For switch_to_kernel() and restore_all_guest() so far implicit alignment
> (from being first in their respective sections) is being made explicit
> (as in: using FUNC() without 2nd argument). Whereas for
> {,compat}create_bounce_frame() and autogen_entrypoints[] alignment is
> newly arranged for.
> 
> Except for the added/adjusted alignment padding (including their
> knock-on effects) no change in generated code/data. Note that the basis
> for support of weak definitions is added despite them not having any use
> right now.
> 
> Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
> use site wants the symbol global anyway.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>

Thanks, Roger.

Re: [PATCH v5 8/8] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Roger Pau Monné]

On Mon, Jan 15, 2024 at 03:40:19PM +0100, Jan Beulich wrote:
> Leverage the new infrastructure in xen/linkage.h to also switch to per-
> function sections (when configured), deriving the specific name from the
> "base" section in use at the time FUNC() is invoked.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> TBD: Since we use .subsection in UNLIKELY_START(), a perhaps not really
>      wanted side effect of this change is that respective out-of-line
>      code now moves much closer to its original (invoking) code.

Hm, I'm afraid I don't have much useful suggestions here.

> TBD: Of course something with the same overall effect, but less
>      impactful might do in Config.mk. E.g. $(filter-out -D%,$(3))
>      instead of $(firstword (3)).

I don't have a strong opinion re those two options  My preference
however (see below for reasoning) would be to put this detection in
Kconfig.

> TBD: On top of Roger's respective patch (for livepatch), also respect
>      CONFIG_FUNCTION_ALIGNMENT.

I think you can drop that, as the series is blocked.

> Note that we'd need to split DATA() in order to separate r/w and r/o
> contributions. Further splitting might be needed to also support more
> advanced attributes (e.g. merge), hence why this isn't done right here.
> Sadly while a new section's name can be derived from the presently in
> use, its attributes cannot be. Perhaps the only thing we can do is give
> DATA() a 2nd mandatory parameter. Then again I guess most data
> definitions could be moved to C anyway.
> ---
> v5: Re-base over changes earlier in the series.
> v4: Re-base.
> v2: Make detection properly fail on old gas (by adjusting
>     cc-option-add-closure).
> 
> --- a/Config.mk
> +++ b/Config.mk
> @@ -102,7 +102,7 @@ cc-option = $(shell if $(1) $(2:-Wno-%=-
>  # Usage: $(call cc-option-add CFLAGS,CC,-march=winchip-c6)
>  cc-option-add = $(eval $(call cc-option-add-closure,$(1),$(2),$(3)))
>  define cc-option-add-closure
> -    ifneq ($$(call cc-option,$$($(2)),$(3),n),n)
> +    ifneq ($$(call cc-option,$$($(2)),$(firstword $(3)),n),n)
>          $(1) += $(3)
>      endif
>  endef
> --- a/xen/Makefile
> +++ b/xen/Makefile
> @@ -409,6 +409,9 @@ AFLAGS += -D__ASSEMBLY__
>  
>  $(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--noexecstack)
>  
> +# Check to see whether the assmbler supports the --sectname-subst option.
> +$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)

I guess you already know what I'm going to comment on.  I think this
would be clearer if it was a Kconfig option.  For once because I think
we should gate livapatch support on the option being available, and
secondly it would avoid having to pass the extra -D around.

I think it's relevant to have a consistent set of build tool options
requirements for livepatch support, so that when enabled the support
is consistent across builds.  With this approach livepatch could be
enabled in Kconfig, but depending on the tools support the resulting
binary might or might not support live patching of assembly code.
Such behavior is IMO unhelpful from a user PoV, and can lead to
surprises down the road.

Thanks, Roger.

Re: [PATCH v5 8/8] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Jan Beulich]

On 19.01.2024 11:36, Roger Pau Monné wrote:
> On Mon, Jan 15, 2024 at 03:40:19PM +0100, Jan Beulich wrote:
>> Leverage the new infrastructure in xen/linkage.h to also switch to per-
>> function sections (when configured), deriving the specific name from the
>> "base" section in use at the time FUNC() is invoked.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> ---
>> TBD: Since we use .subsection in UNLIKELY_START(), a perhaps not really
>>      wanted side effect of this change is that respective out-of-line
>>      code now moves much closer to its original (invoking) code.
> 
> Hm, I'm afraid I don't have much useful suggestions here.
> 
>> TBD: Of course something with the same overall effect, but less
>>      impactful might do in Config.mk. E.g. $(filter-out -D%,$(3))
>>      instead of $(firstword (3)).
> 
> I don't have a strong opinion re those two options  My preference
> however (see below for reasoning) would be to put this detection in
> Kconfig.
> 
>> TBD: On top of Roger's respective patch (for livepatch), also respect
>>      CONFIG_FUNCTION_ALIGNMENT.
> 
> I think you can drop that, as the series is blocked.

Considering the series here has been pending for quite some time, too,
I guess I'd like to keep it just in case that other functionality
becomes unblocked or available by some other means, even if only to
remind myself.

>> --- a/xen/Makefile
>> +++ b/xen/Makefile
>> @@ -409,6 +409,9 @@ AFLAGS += -D__ASSEMBLY__
>>  
>>  $(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--noexecstack)
>>  
>> +# Check to see whether the assmbler supports the --sectname-subst option.
>> +$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)
> 
> I guess you already know what I'm going to comment on.  I think this
> would be clearer if it was a Kconfig option.  For once because I think
> we should gate livapatch support on the option being available, and
> secondly it would avoid having to pass the extra -D around.
> 
> I think it's relevant to have a consistent set of build tool options
> requirements for livepatch support, so that when enabled the support
> is consistent across builds.  With this approach livepatch could be
> enabled in Kconfig, but depending on the tools support the resulting
> binary might or might not support live patching of assembly code.
> Such behavior is IMO unhelpful from a user PoV, and can lead to
> surprises down the road.

I can see the desire to have LIVEPATCH grow such a dependency. Yet there
is the bigger still open topic of the criteria towards what, if anything,
to probe for in Kconfig, what, if anything, to probe for in Makefile, and
which of the probing perhaps do in both places. I'm afraid my attempts to
move us closer to a resolution (topic on summit, making proposals on
list) have utterly failed. IOW I don't currently see how the existing
disagreement there can be resolved, which will result in me to continue
following the (traditional) Makefile approach unless I clearly view
Kconfig superior in a particular case. I could perhaps be talked into
following a "mixed Kconfig/Makefile model", along the lines of "x86:
convert CET tool chain feature checks to mixed Kconfig/Makefile model",
albeit I'm sure you're aware there are issues to sort out there, which I
see no value in putting time into as long as I can't expect things to
make progress subsequently.

Dropping this patch, while an option, would seem undesirable to me, since
even without Kconfig probing using new enough tool chains the splitting
would yield reliable results, and provide - imo - an improvement over
what we have right now.

Jan

Ping: [PATCH v5 6/8] PPC: switch entry point annotations to common model

[Jan Beulich]

On 15.01.2024 15:38, Jan Beulich wrote:
> Use the generic framework in xen/linkage.h. No change in generated code
> except of course the converted symbols change to be hidden ones.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

The other architectures have been at least partly switched; would be nice
for PPC to follow suit. May I ask for an ack (or otherwise here), please?

Thanks, Jan

Re: [PATCH v5 4/8] Arm: annotate entry points with type and size

[Jan Beulich]

On 15.01.2024 15:36, Jan Beulich wrote:
> Use the generic framework in xen/linkage.h. No change in generated code
> except for the changed padding value (noticable when config.gz isn't a
> multiple of 4 in size). Plus of course the converted symbols change to
> be hidden ones.
> 
> Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
> use site wants the symbol global anyway.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> Reviewed-by: Julien Grall <jgrall@amazon.com>
> ---
> Only one each of the assembly files is being converted for now. More
> could be done right here or as follow-on in separate patches.

As this was meanwhile committed, I'd like to understand you preference
for further conversion steps: I can certainly see to find time to make
some actual progress here, but it might also be that you prefer to do
so yourself. Please let me know.

Jan

Re: [PATCH v5 8/8] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Roger Pau Monné]

On Mon, Jan 22, 2024 at 11:50:08AM +0100, Jan Beulich wrote:
> On 19.01.2024 11:36, Roger Pau Monné wrote:
> > On Mon, Jan 15, 2024 at 03:40:19PM +0100, Jan Beulich wrote:
> >> Leverage the new infrastructure in xen/linkage.h to also switch to per-
> >> function sections (when configured), deriving the specific name from the
> >> "base" section in use at the time FUNC() is invoked.
> >>
> >> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> >> ---
> >> TBD: Since we use .subsection in UNLIKELY_START(), a perhaps not really
> >>      wanted side effect of this change is that respective out-of-line
> >>      code now moves much closer to its original (invoking) code.
> > 
> > Hm, I'm afraid I don't have much useful suggestions here.
> > 
> >> TBD: Of course something with the same overall effect, but less
> >>      impactful might do in Config.mk. E.g. $(filter-out -D%,$(3))
> >>      instead of $(firstword (3)).
> > 
> > I don't have a strong opinion re those two options  My preference
> > however (see below for reasoning) would be to put this detection in
> > Kconfig.
> > 
> >> TBD: On top of Roger's respective patch (for livepatch), also respect
> >>      CONFIG_FUNCTION_ALIGNMENT.
> > 
> > I think you can drop that, as the series is blocked.
> 
> Considering the series here has been pending for quite some time, too,
> I guess I'd like to keep it just in case that other functionality
> becomes unblocked or available by some other means, even if only to
> remind myself.

So as you have seen I've posted a new version of just the function
alignment patch, that I expected wasn't controversial.

> >> --- a/xen/Makefile
> >> +++ b/xen/Makefile
> >> @@ -409,6 +409,9 @@ AFLAGS += -D__ASSEMBLY__
> >>  
> >>  $(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--noexecstack)
> >>  
> >> +# Check to see whether the assmbler supports the --sectname-subst option.
> >> +$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)
> > 
> > I guess you already know what I'm going to comment on.  I think this
> > would be clearer if it was a Kconfig option.  For once because I think
> > we should gate livapatch support on the option being available, and
> > secondly it would avoid having to pass the extra -D around.
> > 
> > I think it's relevant to have a consistent set of build tool options
> > requirements for livepatch support, so that when enabled the support
> > is consistent across builds.  With this approach livepatch could be
> > enabled in Kconfig, but depending on the tools support the resulting
> > binary might or might not support live patching of assembly code.
> > Such behavior is IMO unhelpful from a user PoV, and can lead to
> > surprises down the road.
> 
> I can see the desire to have LIVEPATCH grow such a dependency. Yet there
> is the bigger still open topic of the criteria towards what, if anything,
> to probe for in Kconfig, what, if anything, to probe for in Makefile, and
> which of the probing perhaps do in both places. I'm afraid my attempts to
> move us closer to a resolution (topic on summit, making proposals on
> list) have utterly failed. IOW I don't currently see how the existing
> disagreement there can be resolved, which will result in me to continue
> following the (traditional) Makefile approach unless I clearly view
> Kconfig superior in a particular case. I could perhaps be talked into
> following a "mixed Kconfig/Makefile model", along the lines of "x86:
> convert CET tool chain feature checks to mixed Kconfig/Makefile model",
> albeit I'm sure you're aware there are issues to sort out there, which I
> see no value in putting time into as long as I can't expect things to
> make progress subsequently.

I think there are more subtle cases where it's indeed arguable that
putting it in Kconfig or a Makefile makes no difference from a user
experience PoV, hence in the context here I do believe it wants to be
in Kconfig as LIVEPATCH can be make dependent on it.

> Dropping this patch, while an option, would seem undesirable to me, since
> even without Kconfig probing using new enough tool chains the splitting
> would yield reliable results, and provide - imo - an improvement over
> what we have right now.

I could send a followup afterwards to arrange for the check to be in
Kconfig, but it would feel a bit odd to me this is not done in the
first place.

I don't want to block the patch because I think it's useful, so worst
case I'm willing to give my Ack and provide an alternative Kconfig
based patch afterwards.

Thanks, Roger.

Re: Ping: [PATCH v5 6/8] PPC: switch entry point annotations to common model

[Shawn Anastasio]

Hi Jan,

On 1/22/24 7:20 AM, Jan Beulich wrote:
> On 15.01.2024 15:38, Jan Beulich wrote:
>> Use the generic framework in xen/linkage.h. No change in generated code
>> except of course the converted symbols change to be hidden ones.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> 
> The other architectures have been at least partly switched; would be nice
> for PPC to follow suit. May I ask for an ack (or otherwise here), please?
>

Sorry for the delay.

Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>

> Thanks, Jan

Thanks,
Shawn

[PATCH v6 7/7] (mostly) x86: add/convert entry point annotations

[Jan Beulich]

1: common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions
2: SVM: convert entry point annotations
3: VMX: convert entry point annotations
4: x86/ACPI: annotate assembly functions with type and size
5: x86/kexec: convert entry point annotations
6: x86: convert misc assembly function annotations
7: x86: move ENTRY(), GLOBAL(), and ALIGN

Jan

Re: [PATCH v6 0/7] (mostly) x86: add/convert entry point annotations

[Jan Beulich]

On 07.02.2024 14:34, Jan Beulich wrote:
> 1: common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions
> 2: SVM: convert entry point annotations
> 3: VMX: convert entry point annotations
> 4: x86/ACPI: annotate assembly functions with type and size
> 5: x86/kexec: convert entry point annotations
> 6: x86: convert misc assembly function annotations
> 7: x86: move ENTRY(), GLOBAL(), and ALIGN

Being the cover letter, the title was of course supposed to say 0/7.

Jan

[PATCH v6 1/7] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Jan Beulich]

Leverage the new infrastructure in xen/linkage.h to also switch to per-
function sections (when configured), deriving the specific name from the
"base" section in use at the time FUNC() is invoked.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
TBD: Since we use .subsection in UNLIKELY_START(), a perhaps not really
     wanted side effect of this change is that respective out-of-line
     code now moves much closer to its original (invoking) code.

TBD: Of course something with the same overall effect, but less
     impactful might do in Config.mk. E.g. $(filter-out -D%,$(3))
     instead of $(firstword (3)). In fact Roger wants the detection to
     be in Kconfig, for LIVEPATCH to depend on it. Yet the whole
     underlying discussion there imo would first need settling (and
     therefore reviving).

TBD: On top of Roger's respective patch (for livepatch), also respect
     CONFIG_FUNCTION_ALIGNMENT.

Note that we'd need to split DATA() in order to separate r/w and r/o
contributions. Further splitting might be needed to also support more
advanced attributes (e.g. merge), hence why this isn't done right here.
Sadly while a new section's name can be derived from the presently in
use, its attributes cannot be. Perhaps the only thing we can do is give
DATA() a 2nd mandatory parameter. Then again I guess most data
definitions could be moved to C anyway.
---
v6: Deal with x86'es entry_PF() and entry_int82() falling through to the
    next "function". Re-base.
v5: Re-base over changes earlier in the series.
v4: Re-base.
v2: Make detection properly fail on old gas (by adjusting
    cc-option-add-closure).

--- a/Config.mk
+++ b/Config.mk
@@ -102,7 +102,7 @@ cc-option = $(shell if $(1) $(2:-Wno-%=-
 # Usage: $(call cc-option-add CFLAGS,CC,-march=winchip-c6)
 cc-option-add = $(eval $(call cc-option-add-closure,$(1),$(2),$(3)))
 define cc-option-add-closure
-    ifneq ($$(call cc-option,$$($(2)),$(3),n),n)
+    ifneq ($$(call cc-option,$$($(2)),$(firstword $(3)),n),n)
         $(1) += $(3)
     endif
 endef
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -409,6 +409,9 @@ AFLAGS += -D__ASSEMBLY__
 
 $(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--noexecstack)
 
+# Check to see whether the assembler supports the --sectname-subst option.
+$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)
+
 LDFLAGS-$(call ld-option,--warn-rwx-segments) += --no-warn-rwx-segments
 
 CFLAGS += $(CFLAGS-y)
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -157,6 +157,9 @@ SECTIONS
   .init.text : {
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        _einittext = .;
        . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
        *(.altinstr_replacement)
--- a/xen/arch/ppc/xen.lds.S
+++ b/xen/arch/ppc/xen.lds.S
@@ -104,6 +104,9 @@ SECTIONS
     .init.text : {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/riscv/xen.lds.S
+++ b/xen/arch/riscv/xen.lds.S
@@ -104,6 +104,9 @@ SECTIONS
     .init.text : {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -29,6 +29,9 @@ FUNC(entry_int82)
 
         mov   %rsp, %rdi
         call  do_entry_int82
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   compat_test_all_events
+#endif
 END(entry_int82)
 
 /* %rbx: struct vcpu */
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -723,6 +723,9 @@ END(common_interrupt)
 FUNC(entry_PF)
         ENDBR64
         movl  $X86_EXC_PF, 4(%rsp)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   handle_exception
+#endif
 END(entry_PF)
 /* No special register assumptions. */
 FUNC(handle_exception, 0)
@@ -1023,8 +1026,11 @@ FUNC(entry_NMI)
         ENDBR64
         pushq $0
         movl  $X86_EXC_NMI, 4(%rsp)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   handle_ist_exception
+#endif
 END(entry_NMI)
-
+/* No special register assumptions. */
 FUNC(handle_ist_exception)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -86,6 +86,9 @@ SECTIONS
        . = ALIGN(PAGE_SIZE);
        _stextentry = .;
        *(.text.entry)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.text.entry.*)
+#endif
        . = ALIGN(PAGE_SIZE);
        _etextentry = .;
 
@@ -214,6 +217,9 @@ SECTIONS
 #endif
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        *(.text.startup)
        _einittext = .;
        /*
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -19,6 +19,14 @@
 
 #define SYM_ALIGN(align...) .balign align
 
+#if defined(HAVE_AS_SECTNAME_SUBST) && defined(CONFIG_CC_SPLIT_SECTIONS)
+# define SYM_PUSH_SECTION(name, attr) \
+         .pushsection %S.name, attr, %progbits; \
+         .equ .Lsplit_section, 1
+#else
+# define SYM_PUSH_SECTION(name, attr)
+#endif
+
 #define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
@@ -33,7 +41,14 @@
         SYM_ALIGN(align);                         \
         name:
 
-#define END(name) .size name, . - name
+#define END(name) \
+        .size name, . - name; \
+        .ifdef .Lsplit_section; \
+            .if .Lsplit_section; \
+                .popsection; \
+                .equ .Lsplit_section, 0; \
+            .endif; \
+        .endif
 
 /*
  * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
@@ -47,6 +62,7 @@
 #endif
 
 #define FUNC(name, align...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(align))
 #define LABEL(name, align...) \
         SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(align))
@@ -54,6 +70,7 @@
         SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
 
 #define FUNC_LOCAL(name, align...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(align))
 #define LABEL_LOCAL(name, align...) \
         SYM(name, NONE, LOCAL, DO_CODE_ALIGN(align))

[PATCH v6 2/7] SVM: convert entry point annotations

[Jan Beulich]

Use the generic framework from xen/linkage.h.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v6: New.

--- a/xen/arch/x86/hvm/svm/entry.S
+++ b/xen/arch/x86/hvm/svm/entry.S
@@ -24,7 +24,7 @@
 #include <asm/asm_defns.h>
 #include <asm/page.h>
 
-ENTRY(svm_asm_do_resume)
+FUNC(svm_asm_do_resume)
         GET_CURRENT(bx)
 .Lsvm_do_resume:
         call svm_intr_assist
@@ -132,7 +132,7 @@ __UNLIKELY_END(nsvm_hap)
          * to safely resolve any Spectre-v1 concerns in the above logic.
          */
         stgi
-GLOBAL(svm_stgi_label)
+LABEL(svm_stgi_label, 0)
         call svm_vmexit_handler
         jmp  .Lsvm_do_resume
 
@@ -140,6 +140,4 @@ GLOBAL(svm_stgi_label)
         sti
         call do_softirq
         jmp  .Lsvm_do_resume
-
-        .type svm_asm_do_resume, @function
-        .size svm_asm_do_resume, . - svm_asm_do_resume
+END(svm_asm_do_resume)

[PATCH v6 3/7] VMX: convert entry point annotations

[Jan Beulich]

Use the generic framework from xen/linkage.h.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v6: New.

--- a/xen/arch/x86/hvm/vmx/entry.S
+++ b/xen/arch/x86/hvm/vmx/entry.S
@@ -24,7 +24,7 @@
 #define VMRESUME     .byte 0x0f,0x01,0xc3
 #define VMLAUNCH     .byte 0x0f,0x01,0xc2
 
-ENTRY(vmx_asm_vmexit_handler)
+FUNC(vmx_asm_vmexit_handler)
         SAVE_ALL
 
         mov  %cr2,%rax
@@ -132,7 +132,7 @@ UNLIKELY_END(realmode)
         call vmx_vmentry_failure
         jmp  .Lvmx_process_softirqs
 
-ENTRY(vmx_asm_do_vmentry)
+LABEL(vmx_asm_do_vmentry)
         GET_CURRENT(bx)
         jmp  .Lvmx_do_vmentry
 
@@ -150,6 +150,4 @@ ENTRY(vmx_asm_do_vmentry)
         sti
         call do_softirq
         jmp  .Lvmx_do_vmentry
-
-        .type vmx_asm_vmexit_handler, @function
-        .size vmx_asm_vmexit_handler, . - vmx_asm_vmexit_handler
+END(vmx_asm_vmexit_handler)

[PATCH v6 4/7] x86/ACPI: annotate assembly functions with type and size

[Jan Beulich]

Use the generic framework from xen/linkage.h.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
The .Lsuspend_err label is used in a cross-function manner here, but
it's not clear to me what - if anything - to do about this.
---
v6: New.

--- a/xen/arch/x86/acpi/wakeup_prot.S
+++ b/xen/arch/x86/acpi/wakeup_prot.S
@@ -7,7 +7,7 @@
         .text
         .code64
 
-ENTRY(do_suspend_lowlevel)
+FUNC(do_suspend_lowlevel)
         push    %rbp
         push    %rbx
         push    %r12
@@ -32,6 +32,7 @@ ENTRY(do_suspend_lowlevel)
 
         /* It seems we didn't suspend.  Get out of here. */
         jmp     .Lsuspend_err
+END(do_suspend_lowlevel)
 
         /*
          * do_suspend_lowlevel() is arranged to behave as a regular function
@@ -43,7 +44,7 @@ ENTRY(do_suspend_lowlevel)
          *
          * Everything else, including the stack, needs restoring.
          */
-ENTRY(s3_resume)
+FUNC(s3_resume)
         lgdt    boot_gdtr(%rip)
 
         mov     saved_cr0(%rip), %rax
@@ -132,6 +133,7 @@ ENTRY(s3_resume)
         pop     %rbx
         pop     %rbp
         ret
+END(s3_resume)
 
 .data
         .align 16
@@ -142,5 +144,4 @@ saved_cr0:      .quad   0
 saved_ssp:      .quad   0
 #endif
 
-GLOBAL(saved_magic)
-        .long   0x9abcdef0
+ASM_INT(saved_magic, 0x9abcdef0)

[PATCH v6 5/7] x86/kexec: convert entry point annotations

[Jan Beulich]

Use the generic framework from xen/linkage.h.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
Using the linker script like this feels fragile. Maybe it's better to
suppress (#undef) CONFIG_CC_SPLIT_SECTIONS for this one file?
---
v6: New.

--- a/xen/arch/x86/x86_64/kexec_reloc.S
+++ b/xen/arch/x86/x86_64/kexec_reloc.S
@@ -21,10 +21,9 @@
 #include <asm/machine_kexec.h>
 
         .section .text.kexec, "ax", @progbits
-        .align PAGE_SIZE
         .code64
 
-ENTRY(kexec_reloc)
+FUNC(kexec_reloc, PAGE_SIZE)
         /* %rdi - code page maddr */
         /* %rsi - page table maddr */
         /* %rdx - indirection page maddr */
@@ -91,8 +90,9 @@ ENTRY(kexec_reloc)
         push    $0x10
         push    %rax
         lretq
+END(kexec_reloc)
 
-relocate_pages:
+FUNC_LOCAL(relocate_pages)
         /* %rdi - indirection page maddr */
         pushq   %rbx
 
@@ -138,10 +138,11 @@ relocate_pages:
 .L_done:
         popq    %rbx
         ret
+END(relocate_pages)
 
         .code32
 
-compatibility_mode:
+FUNC_LOCAL(compatibility_mode)
         /* Setup some sane segments. */
         movl    $0x0008, %eax
         movl    %eax, %ds
@@ -168,39 +169,29 @@ compatibility_mode:
         /* Call the image entry point.  This should never return. */
         call    *%ebp
         ud2
+END(compatibility_mode)
 
-        .align 4
-compat_mode_gdt_desc:
+DATA_LOCAL(compat_mode_gdt_desc, 4)
         .word .Lcompat_mode_gdt_end - compat_mode_gdt -1
         .quad 0x0000000000000000     /* set in call_32_bit above */
+END(compat_mode_gdt_desc)
 
-        .type compat_mode_gdt_desc, @object
-        .size compat_mode_gdt_desc, . - compat_mode_gdt_desc
-
-        .align 8
-compat_mode_gdt:
+DATA_LOCAL(compat_mode_gdt, 8)
         .quad 0x0000000000000000     /* null                              */
         .quad 0x00cf93000000ffff     /* 0x0008 ring 0 data                */
         .quad 0x00cf9b000000ffff     /* 0x0010 ring 0 code, compatibility */
 .Lcompat_mode_gdt_end:
+END(compat_mode_gdt)
 
-        .type compat_mode_gdt, @object
-        .size compat_mode_gdt, . - compat_mode_gdt
-
-compat_mode_idt:
+DATA_LOCAL(compat_mode_idt)
         .word 0                      /* limit */
         .long 0                      /* base */
-
-        .type compat_mode_idt, @object
-        .size compat_mode_idt, . - compat_mode_idt
+END(compat_mode_idt)
 
         /*
          * 16 words of stack are more than enough.
          */
-        .align 8
-reloc_stack:
+DATA_LOCAL(reloc_stack, 8)
         .fill 16,8,0
 .Lreloc_stack_base:
-
-        .type reloc_stack, @object
-        .size reloc_stack, . - reloc_stack
+END(reloc_stack)
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -92,7 +92,10 @@ SECTIONS
        . = ALIGN(PAGE_SIZE);
        _etextentry = .;
 
-       *(.text.kexec)          /* Page aligned in the object file. */
+       /* Page aligned in the object file. */
+       *(.text.kexec.kexec_reloc)
+       *(.text.kexec.*)
+       *(.text.kexec)
        kexec_reloc_end = .;
 
        *(.text.cold)

[PATCH v6 6/7] x86: convert misc assembly function annotations

[Jan Beulich]

Use the generic framework from xen/linkage.h.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v6: New.

--- a/xen/arch/x86/clear_page.S
+++ b/xen/arch/x86/clear_page.S
@@ -1,8 +1,9 @@
         .file __FILE__
 
+#include <xen/linkage.h>
 #include <asm/page.h>
 
-ENTRY(clear_page_sse2)
+FUNC(clear_page_sse2)
         mov     $PAGE_SIZE/32, %ecx
         xor     %eax,%eax
 
@@ -16,6 +17,4 @@ ENTRY(clear_page_sse2)
 
         sfence
         ret
-
-        .type clear_page_sse2, @function
-        .size clear_page_sse2, . - clear_page_sse2
+END(clear_page_sse2)
--- a/xen/arch/x86/copy_page.S
+++ b/xen/arch/x86/copy_page.S
@@ -1,5 +1,6 @@
         .file __FILE__
 
+#include <xen/linkage.h>
 #include <asm/page.h>
 
 #define src_reg %rsi
@@ -10,7 +11,7 @@
 #define tmp3_reg %r10
 #define tmp4_reg %r11
 
-ENTRY(copy_page_sse2)
+FUNC(copy_page_sse2)
         mov     $PAGE_SIZE/(4*WORD_SIZE)-3, %ecx
 
         prefetchnta 2*4*WORD_SIZE(src_reg)
@@ -41,6 +42,4 @@ ENTRY(copy_page_sse2)
 
         sfence
         ret
-
-        .type copy_page_sse2, @function
-        .size copy_page_sse2, . - copy_page_sse2
+END(copy_page_sse2)
--- a/xen/arch/x86/guest/xen/hypercall_page.S
+++ b/xen/arch/x86/guest/xen/hypercall_page.S
@@ -3,13 +3,11 @@
 #include <public/xen.h>
 
         .section ".text.page_aligned", "ax", @progbits
-        .p2align PAGE_SHIFT
 
-GLOBAL(hypercall_page)
+DATA(hypercall_page, PAGE_SIZE)
          /* Poisoned with `ret` for safety before hypercalls are set up. */
         .fill PAGE_SIZE, 1, 0xc3
-        .type hypercall_page, STT_OBJECT
-        .size hypercall_page, PAGE_SIZE
+END(hypercall_page)
 
 /*
  * Identify a specific hypercall in the hypercall page
--- a/xen/arch/x86/indirect-thunk.S
+++ b/xen/arch/x86/indirect-thunk.S
@@ -35,15 +35,13 @@
 .macro GEN_INDIRECT_THUNK reg:req
         .section .text.__x86_indirect_thunk_\reg, "ax", @progbits
 
-ENTRY(__x86_indirect_thunk_\reg)
+FUNC(__x86_indirect_thunk_\reg)
         ALTERNATIVE_2 __stringify(IND_THUNK_RETPOLINE \reg),              \
         __stringify(IND_THUNK_LFENCE \reg), X86_FEATURE_IND_THUNK_LFENCE, \
         __stringify(IND_THUNK_JMP \reg),    X86_FEATURE_IND_THUNK_JMP
 
         int3 /* Halt straight-line speculation */
-
-        .size __x86_indirect_thunk_\reg, . - __x86_indirect_thunk_\reg
-        .type __x86_indirect_thunk_\reg, @function
+END(__x86_indirect_thunk_\reg)
 .endm
 
 /* Instantiate GEN_INDIRECT_THUNK for each register except %rsp. */
--- a/xen/arch/x86/pv/gpr_switch.S
+++ b/xen/arch/x86/pv/gpr_switch.S
@@ -10,7 +10,7 @@
 #include <asm/asm_defns.h>
 
 /* Load guest GPRs.  Parameter in %rdi, clobbers all registers. */
-ENTRY(load_guest_gprs)
+FUNC(load_guest_gprs)
         movq  UREGS_rdx(%rdi), %rdx
         movq  UREGS_rax(%rdi), %rax
         movq  UREGS_rbx(%rdi), %rbx
@@ -27,13 +27,10 @@ ENTRY(load_guest_gprs)
         movq  UREGS_rcx(%rdi), %rcx
         movq  UREGS_rdi(%rdi), %rdi
         ret
-
-        .size load_guest_gprs, . - load_guest_gprs
-        .type load_guest_gprs, STT_FUNC
-
+END(load_guest_gprs)
 
 /* Save guest GPRs.  Parameter on the stack above the return address. */
-ENTRY(save_guest_gprs)
+FUNC(save_guest_gprs)
         pushq %rdi
         movq  2*8(%rsp), %rdi
         movq  %rax, UREGS_rax(%rdi)
@@ -52,6 +49,4 @@ ENTRY(save_guest_gprs)
         movq  %rdx, UREGS_rdx(%rdi)
         movq  %rcx, UREGS_rcx(%rdi)
         ret
-
-        .size save_guest_gprs, . - save_guest_gprs
-        .type save_guest_gprs, STT_FUNC
+END(save_guest_gprs)
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -599,7 +599,7 @@ domain_crash_page_fault_0x8:
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         movq  %rsi,%rdi
         call  show_page_walk
-ENTRY(dom_crash_sync_extable)
+LABEL(dom_crash_sync_extable, 0)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         # Get out of the guest-save area of the stack.
         GET_STACK_END(ax)

[PATCH v6 7/7] x86: move ENTRY(), GLOBAL(), and ALIGN

[Jan Beulich]

... to boot code, limiting their scope and thus allowing to drop
respective #undef-s from the linker script.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
An obvious alternative would be to convert boot code right away too, but
I think this has lower priority for now.
---
v6: New.

--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -10,6 +10,15 @@
 #include <asm/cpufeature.h>
 #include <public/elfnote.h>
 
+#define ALIGN .align CODE_ALIGN, CODE_FILL
+#define ENTRY(name)                             \
+  ALIGN;                                        \
+  GLOBAL(name)
+#define GLOBAL(name)                            \
+  .globl name;                                  \
+  .hidden name;                                 \
+  name:
+
         .section .text.header, "ax", @progbits
         .code32
 
--- a/xen/arch/x86/include/asm/config.h
+++ b/xen/arch/x86/include/asm/config.h
@@ -45,14 +45,6 @@
 #ifdef __ASSEMBLY__
 #define CODE_ALIGN 16
 #define CODE_FILL 0x90
-#define ALIGN .align CODE_ALIGN, CODE_FILL
-#define ENTRY(name)                             \
-  ALIGN;                                        \
-  GLOBAL(name)
-#define GLOBAL(name)                            \
-  .globl name;                                  \
-  .hidden name;                                 \
-  name:
 #endif
 
 #define NR_hypercalls 64
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -1199,7 +1199,7 @@ FUNC_LOCAL(autogen_stubs, 0) /* Automati
         .if vec >= FIRST_IRQ_VECTOR
 #endif
 
-        ALIGN
+        .align CODE_ALIGN, CODE_FILL
 1:
         ENDBR64
         pushq $0
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -5,8 +5,6 @@
 #include <xen/lib.h>
 #include <xen/xen.lds.h>
 #include <asm/page.h>
-#undef ENTRY
-#undef ALIGN
 
 #ifdef EFI
 

Re: [PATCH v6 2/7] SVM: convert entry point annotations

[Andrew Cooper]

On 07/02/2024 1:37 pm, Jan Beulich wrote:
> Use the generic framework from xen/linkage.h.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>

Re: [PATCH v6 3/7] VMX: convert entry point annotations

[Andrew Cooper]

On 07/02/2024 1:37 pm, Jan Beulich wrote:
> Use the generic framework from xen/linkage.h.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> v6: New.
>
> --- a/xen/arch/x86/hvm/vmx/entry.S
> +++ b/xen/arch/x86/hvm/vmx/entry.S
> @@ -24,7 +24,7 @@
>  #define VMRESUME     .byte 0x0f,0x01,0xc3
>  #define VMLAUNCH     .byte 0x0f,0x01,0xc2
>  
> -ENTRY(vmx_asm_vmexit_handler)
> +FUNC(vmx_asm_vmexit_handler)
>          SAVE_ALL
>  
>          mov  %cr2,%rax
> @@ -132,7 +132,7 @@ UNLIKELY_END(realmode)
>          call vmx_vmentry_failure
>          jmp  .Lvmx_process_softirqs
>  
> -ENTRY(vmx_asm_do_vmentry)
> +LABEL(vmx_asm_do_vmentry)

This really is a function, not a label.

xen.git/xen$ git grep vmx_asm_do_vmentry
arch/x86/hvm/vmx/entry.S:135:ENTRY(vmx_asm_do_vmentry)
arch/x86/hvm/vmx/vmcs.c:1855:void noreturn vmx_asm_do_vmentry(void);
arch/x86/hvm/vmx/vmcs.c:1929:    reset_stack_and_jump(vmx_asm_do_vmentry);

It is giant mess, of two functions forming part of the same loop.

Considering that you declines to take CODE, I don't know what to
suggest.  The point of CODE, distinct to FUNC, was to identify the
places where weird things were going on, and this absolutely counts.

~Andrew

Re: [PATCH v6 4/7] x86/ACPI: annotate assembly functions with type and size

[Andrew Cooper]

On 07/02/2024 1:37 pm, Jan Beulich wrote:
> Use the generic framework from xen/linkage.h.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> The .Lsuspend_err label is used in a cross-function manner here, but
> it's not clear to me what - if anything - to do about this.

Well - again like VMX, this is special CODE.

It really is one function, do_suspend_lowlevel() - see how it's caller
uses it, with a magic position in the middle that is joined by the S3 path.

s3_resume should be a CODE too, or whatever we call a not-LABEL.

~Andrew

Re: [PATCH v6 5/7] x86/kexec: convert entry point annotations

[Andrew Cooper]

On 07/02/2024 1:38 pm, Jan Beulich wrote:
> Use the generic framework from xen/linkage.h.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> Using the linker script like this feels fragile. Maybe it's better to
> suppress (#undef) CONFIG_CC_SPLIT_SECTIONS for this one file?

This is specific glue code, needing to fit in a single page.  I'd prefer
to explicitly state that SPLIT_SECTIONS is inapplciable, than to try to
undo the effects in the linker script.

Everything else looks ok.  I'll fix the preexiting errors after a rebase.

~Andrew

Re: [PATCH v6 6/7] x86: convert misc assembly function annotations

[Andrew Cooper]

On 07/02/2024 1:38 pm, Jan Beulich wrote:

> --- a/xen/arch/x86/x86_64/entry.S
> +++ b/xen/arch/x86/x86_64/entry.S
> @@ -599,7 +599,7 @@ domain_crash_page_fault_0x8:
>          ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
>          movq  %rsi,%rdi
>          call  show_page_walk
> -ENTRY(dom_crash_sync_extable)
> +LABEL(dom_crash_sync_extable, 0)
>          ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
>          # Get out of the guest-save area of the stack.
>          GET_STACK_END(ax)
>

This again is a function, and one even used across-TUs.

Furthermore, it's a (domain) fatal error path.  It has the least excuse
of all to not conform to a regular function-like layout.

Everything else looks fine.  If you want to split this out into a
separate patch to address its function-ness, then consider the remainder
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>

Re: [PATCH v6 3/7] VMX: convert entry point annotations

[Jan Beulich]

On 07.02.2024 14:55, Andrew Cooper wrote:
> On 07/02/2024 1:37 pm, Jan Beulich wrote:
>> Use the generic framework from xen/linkage.h.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> ---
>> v6: New.
>>
>> --- a/xen/arch/x86/hvm/vmx/entry.S
>> +++ b/xen/arch/x86/hvm/vmx/entry.S
>> @@ -24,7 +24,7 @@
>>  #define VMRESUME     .byte 0x0f,0x01,0xc3
>>  #define VMLAUNCH     .byte 0x0f,0x01,0xc2
>>  
>> -ENTRY(vmx_asm_vmexit_handler)
>> +FUNC(vmx_asm_vmexit_handler)
>>          SAVE_ALL
>>  
>>          mov  %cr2,%rax
>> @@ -132,7 +132,7 @@ UNLIKELY_END(realmode)
>>          call vmx_vmentry_failure
>>          jmp  .Lvmx_process_softirqs
>>  
>> -ENTRY(vmx_asm_do_vmentry)
>> +LABEL(vmx_asm_do_vmentry)
> 
> This really is a function, not a label.
> 
> xen.git/xen$ git grep vmx_asm_do_vmentry
> arch/x86/hvm/vmx/entry.S:135:ENTRY(vmx_asm_do_vmentry)
> arch/x86/hvm/vmx/vmcs.c:1855:void noreturn vmx_asm_do_vmentry(void);
> arch/x86/hvm/vmx/vmcs.c:1929:    reset_stack_and_jump(vmx_asm_do_vmentry);
> 
> It is giant mess, of two functions forming part of the same loop.
> 
> Considering that you declines to take CODE, I don't know what to
> suggest.  The point of CODE, distinct to FUNC, was to identify the
> places where weird things were going on, and this absolutely counts.

What's not clear to me: How would CODE() differ from both FUNC() and
LABEL()? And if the symbol is to be a function, what's wrong with
using FUNC() here as is? There's in particular no real need to have
all FUNC()s paired with END()s, afaict.

Jan

Re: [PATCH v6 7/7] x86: move ENTRY(), GLOBAL(), and ALIGN

[Andrew Cooper]

On 07/02/2024 1:39 pm, Jan Beulich wrote:
> ... to boot code, limiting their scope and thus allowing to drop
> respective #undef-s from the linker script.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> An obvious alternative would be to convert boot code right away too, but
> I think this has lower priority for now.

Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>

It would be nice to take these out, and it doesn't look as if it's too
much work to do, but I guess we can settle for getting them out of config.h

~Andrew

Re: [PATCH v6 3/7] VMX: convert entry point annotations

[Jan Beulich]

On 07.02.2024 15:25, Jan Beulich wrote:
> On 07.02.2024 14:55, Andrew Cooper wrote:
>> On 07/02/2024 1:37 pm, Jan Beulich wrote:
>>> Use the generic framework from xen/linkage.h.
>>>
>>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>> ---
>>> v6: New.
>>>
>>> --- a/xen/arch/x86/hvm/vmx/entry.S
>>> +++ b/xen/arch/x86/hvm/vmx/entry.S
>>> @@ -24,7 +24,7 @@
>>>  #define VMRESUME     .byte 0x0f,0x01,0xc3
>>>  #define VMLAUNCH     .byte 0x0f,0x01,0xc2
>>>  
>>> -ENTRY(vmx_asm_vmexit_handler)
>>> +FUNC(vmx_asm_vmexit_handler)
>>>          SAVE_ALL
>>>  
>>>          mov  %cr2,%rax
>>> @@ -132,7 +132,7 @@ UNLIKELY_END(realmode)
>>>          call vmx_vmentry_failure
>>>          jmp  .Lvmx_process_softirqs
>>>  
>>> -ENTRY(vmx_asm_do_vmentry)
>>> +LABEL(vmx_asm_do_vmentry)
>>
>> This really is a function, not a label.
>>
>> xen.git/xen$ git grep vmx_asm_do_vmentry
>> arch/x86/hvm/vmx/entry.S:135:ENTRY(vmx_asm_do_vmentry)
>> arch/x86/hvm/vmx/vmcs.c:1855:void noreturn vmx_asm_do_vmentry(void);
>> arch/x86/hvm/vmx/vmcs.c:1929:    reset_stack_and_jump(vmx_asm_do_vmentry);
>>
>> It is giant mess, of two functions forming part of the same loop.
>>
>> Considering that you declines to take CODE, I don't know what to
>> suggest.  The point of CODE, distinct to FUNC, was to identify the
>> places where weird things were going on, and this absolutely counts.
> 
> What's not clear to me: How would CODE() differ from both FUNC() and
> LABEL()? And if the symbol is to be a function, what's wrong with
> using FUNC() here as is?

Well, I figured this one: FUNC() may switch sections following patch 1,
so indeed we'd need something that is much like FUNC(), but without the
(optional) section switch.

Jan

Re: [PATCH v5 4/8] Arm: annotate entry points with type and size

[Julien Grall]

Hi Jan,

On 22/01/2024 13:22, Jan Beulich wrote:
> On 15.01.2024 15:36, Jan Beulich wrote:
>> Use the generic framework in xen/linkage.h. No change in generated code
>> except for the changed padding value (noticable when config.gz isn't a
>> multiple of 4 in size). Plus of course the converted symbols change to
>> be hidden ones.
>>
>> Note that ASM_INT() is switched to DATA(), not DATA_LOCAL(), as the only
>> use site wants the symbol global anyway.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> Reviewed-by: Julien Grall <jgrall@amazon.com>
>> ---
>> Only one each of the assembly files is being converted for now. More
>> could be done right here or as follow-on in separate patches.
> 
> As this was meanwhile committed, I'd like to understand you preference
> for further conversion steps: I can certainly see to find time to make
> some actual progress here, but it might also be that you prefer to do
> so yourself. Please let me know.

Sorry for the late reply. I will have a look.

Cheers,

-- 
Julien Grall

[PATCH v7 00/11] (mostly) x86+Arm32: add/convert entry point annotations

[Jan Beulich]

01: common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions
02: VMX: convert entry point annotations
03: x86/ACPI: annotate assembly functions with type and size
04: x86/kexec: convert entry point annotations
05: x86: convert dom_crash_sync_extable() annotation
06: x86: move ENTRY(), GLOBAL(), and ALIGN
07: Arm32: use new-style entry annotations for library code
08: Arm32: use new-style entry annotations for MMU code
09: Arm32: use new-style entry annotations for entry code
10: Arm32: use new-style entry annotations in head.S
11: Arm: purge ENTRY(), ENDPROC(), and ALIGN

Jan

[PATCH v7 01/11] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Jan Beulich]

Leverage the new infrastructure in xen/linkage.h to also switch to per-
function sections (when configured), deriving the specific name from the
"base" section in use at the time FUNC() is invoked.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
TBD: Since we use .subsection in UNLIKELY_START(), a perhaps not really
     wanted side effect of this change is that respective out-of-line
     code now moves much closer to its original (invoking) code.

TBD: Of course something with the same overall effect, but less
     impactful might do in Config.mk. E.g. $(filter-out -D%,$(3))
     instead of $(firstword (3)). In fact Roger wants the detection to
     be in Kconfig, for LIVEPATCH to depend on it. Yet the whole
     underlying discussion there imo would first need settling (and
     therefore reviving).

Note that we'd need to split DATA() in order to separate r/w and r/o
contributions. Further splitting might be needed to also support more
advanced attributes (e.g. merge), hence why this isn't done right here.
Sadly while a new section's name can be derived from the presently in
use, its attributes cannot be. Perhaps the only thing we can do is give
DATA() a 2nd mandatory parameter. Then again I guess most data
definitions could be moved to C anyway.
---
v7: Override SYM_PUSH_SECTION() in arch/x86/indirect-thunk.S. Re-base,
    notably to deal with fallout from fba250ae604e ("xen/arm64: head:
    Add missing code symbol annotations").
v6: Deal with x86'es entry_PF() and entry_int82() falling through to the
    next "function". Re-base.
v5: Re-base over changes earlier in the series.
v4: Re-base.
v2: Make detection properly fail on old gas (by adjusting
    cc-option-add-closure).

--- a/Config.mk
+++ b/Config.mk
@@ -102,7 +102,7 @@ cc-option = $(shell if $(1) $(2:-Wno-%=-
 # Usage: $(call cc-option-add CFLAGS,CC,-march=winchip-c6)
 cc-option-add = $(eval $(call cc-option-add-closure,$(1),$(2),$(3)))
 define cc-option-add-closure
-    ifneq ($$(call cc-option,$$($(2)),$(3),n),n)
+    ifneq ($$(call cc-option,$$($(2)),$(firstword $(3)),n),n)
         $(1) += $(3)
     endif
 endef
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -412,6 +412,9 @@ AFLAGS += -D__ASSEMBLY__
 
 $(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--noexecstack)
 
+# Check to see whether the assembler supports the --sectname-subst option.
+$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)
+
 LDFLAGS-$(call ld-option,--warn-rwx-segments) += --no-warn-rwx-segments
 
 CFLAGS += $(CFLAGS-y)
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -90,7 +90,7 @@
  * 4K-aligned address.
  */
 
-FUNC(start)
+LABEL(start)
         /*
          * DO NOT MODIFY. Image header expected by Linux boot-loaders.
          */
@@ -224,7 +224,7 @@ section_table:
         .align  5
 #endif /* CONFIG_ARM_EFI */
 
-FUNC_LOCAL(real_start)
+LABEL_LOCAL(real_start)
         /* BSS should be zeroed when booting without EFI */
         mov   x26, #0                /* x26 := skip_zero_bss */
 
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -152,6 +152,9 @@ SECTIONS
   .init.text : {
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        _einittext = .;
        . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
        *(.altinstr_replacement)
--- a/xen/arch/ppc/xen.lds.S
+++ b/xen/arch/ppc/xen.lds.S
@@ -99,6 +99,9 @@ SECTIONS
     DECL_SECTION(.init.text) {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/riscv/xen.lds.S
+++ b/xen/arch/riscv/xen.lds.S
@@ -96,6 +96,9 @@ SECTIONS
     .init.text : {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/x86/indirect-thunk.S
+++ b/xen/arch/x86/indirect-thunk.S
@@ -11,6 +11,10 @@
 
 #include <asm/asm_defns.h>
 
+/* Section placement is done explicitly here; override the respective macro. */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
+
 .macro IND_THUNK_RETPOLINE reg:req
         call 1f
         int3
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -31,6 +31,9 @@ FUNC(entry_int82)
 
         mov   %rsp, %rdi
         call  do_entry_int82
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   compat_test_all_events
+#endif
 END(entry_int82)
 
 /* %rbx: struct vcpu */
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -771,6 +771,9 @@ END(common_interrupt)
 FUNC(entry_PF)
         ENDBR64
         movb  $X86_EXC_PF, EFRAME_entry_vector(%rsp)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   handle_exception
+#endif
 END(entry_PF)
 /* No special register assumptions. */
 FUNC(handle_exception, 0)
@@ -1084,8 +1087,11 @@ FUNC(entry_NMI)
         ENDBR64
         pushq $0
         movb  $X86_EXC_NMI, EFRAME_entry_vector(%rsp)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   handle_ist_exception
+#endif
 END(entry_NMI)
-
+/* No special register assumptions. */
 FUNC(handle_ist_exception)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -82,6 +82,9 @@ SECTIONS
        . = ALIGN(PAGE_SIZE);
        _stextentry = .;
        *(.text.entry)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.text.entry.*)
+#endif
        . = ALIGN(PAGE_SIZE);
        _etextentry = .;
 
@@ -201,6 +204,9 @@ SECTIONS
 #endif
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        *(.text.startup)
        _einittext = .;
        /*
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -18,6 +18,14 @@
 
 #define SYM_ALIGN(align...) .balign align
 
+#if defined(HAVE_AS_SECTNAME_SUBST) && defined(CONFIG_CC_SPLIT_SECTIONS)
+# define SYM_PUSH_SECTION(name, attr) \
+         .pushsection %S.name, attr, %progbits; \
+         .equ .Lsplit_section, 1
+#else
+# define SYM_PUSH_SECTION(name, attr)
+#endif
+
 #define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
@@ -32,7 +40,14 @@
         SYM_ALIGN(align);                         \
         name:
 
-#define END(name) .size name, . - name
+#define END(name) \
+        .size name, . - name; \
+        .ifdef .Lsplit_section; \
+            .if .Lsplit_section; \
+                .popsection; \
+                .equ .Lsplit_section, 0; \
+            .endif; \
+        .endif
 
 /*
  * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
@@ -47,6 +62,7 @@
 #endif
 
 #define FUNC(name, align...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(align))
 #define LABEL(name, align...) \
         SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(align))
@@ -54,6 +70,7 @@
         SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
 
 #define FUNC_LOCAL(name, align...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(align))
 #define LABEL_LOCAL(name, align...) \
         SYM(name, NONE, LOCAL, DO_CODE_ALIGN(align))

[PATCH v7 02/11] VMX: convert entry point annotations

[Jan Beulich]

Use the generic framework from xen/linkage.h.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v6: New.

--- a/xen/arch/x86/hvm/vmx/entry.S
+++ b/xen/arch/x86/hvm/vmx/entry.S
@@ -24,7 +24,7 @@
 #define VMRESUME     .byte 0x0f,0x01,0xc3
 #define VMLAUNCH     .byte 0x0f,0x01,0xc2
 
-ENTRY(vmx_asm_vmexit_handler)
+FUNC(vmx_asm_vmexit_handler)
         SAVE_ALL
 
         mov  %cr2,%rax
@@ -187,7 +187,7 @@ UNLIKELY_END(realmode)
         call vmx_vmentry_failure
         jmp  .Lvmx_process_softirqs
 
-ENTRY(vmx_asm_do_vmentry)
+LABEL(vmx_asm_do_vmentry)
         GET_CURRENT(bx)
         jmp  .Lvmx_do_vmentry
 
@@ -205,6 +205,4 @@ ENTRY(vmx_asm_do_vmentry)
         sti
         call do_softirq
         jmp  .Lvmx_do_vmentry
-
-        .type vmx_asm_vmexit_handler, @function
-        .size vmx_asm_vmexit_handler, . - vmx_asm_vmexit_handler
+END(vmx_asm_vmexit_handler)

[PATCH v7 03/11] x86/ACPI: annotate assembly function/data with type and size

[Jan Beulich]

Use the generic framework from xen/linkage.h.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v7: Make do_suspend_lowlevel() a single function.
v6: New.

--- a/xen/arch/x86/acpi/wakeup_prot.S
+++ b/xen/arch/x86/acpi/wakeup_prot.S
@@ -7,7 +7,7 @@
         .text
         .code64
 
-ENTRY(do_suspend_lowlevel)
+FUNC(do_suspend_lowlevel)
         push    %rbp
         push    %rbx
         push    %r12
@@ -43,7 +43,7 @@ ENTRY(do_suspend_lowlevel)
          *
          * Everything else, including the stack, needs restoring.
          */
-ENTRY(s3_resume)
+LABEL(s3_resume)
         lgdt    boot_gdtr(%rip)
 
         mov     saved_cr0(%rip), %rax
@@ -132,6 +132,7 @@ ENTRY(s3_resume)
         pop     %rbx
         pop     %rbp
         ret
+END(do_suspend_lowlevel)
 
 .data
         .align 16
@@ -142,5 +143,4 @@ saved_cr0:      .quad   0
 saved_ssp:      .quad   0
 #endif
 
-GLOBAL(saved_magic)
-        .long   0x9abcdef0
+ASM_INT(saved_magic, 0x9abcdef0)

[PATCH v7 04/11] x86/kexec: convert entry point annotations

[Jan Beulich]

Use the generic framework from xen/linkage.h.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v7: Use alternative approach, un-defining CONFIG_CC_SPLIT_SECTIONS.
v6: New.

--- a/xen/arch/x86/x86_64/kexec_reloc.S
+++ b/xen/arch/x86/x86_64/kexec_reloc.S
@@ -13,6 +13,9 @@
 
         .file __FILE__
 
+/* All contents of .text.kexec wants to be kept together. */
+#undef CONFIG_CC_SPLIT_SECTIONS
+
 #include <xen/kimage.h>
 
 #include <asm/asm_defns.h>
@@ -21,10 +24,9 @@
 #include <asm/machine_kexec.h>
 
         .section .text.kexec, "ax", @progbits
-        .align PAGE_SIZE
         .code64
 
-ENTRY(kexec_reloc)
+FUNC(kexec_reloc, PAGE_SIZE)
         /* %rdi - code page maddr */
         /* %rsi - page table maddr */
         /* %rdx - indirection page maddr */
@@ -91,8 +93,9 @@ ENTRY(kexec_reloc)
         push    $0x10
         push    %rax
         lretq
+END(kexec_reloc)
 
-relocate_pages:
+FUNC_LOCAL(relocate_pages)
         /* %rdi - indirection page maddr */
         pushq   %rbx
 
@@ -138,10 +141,11 @@ relocate_pages:
 .L_done:
         popq    %rbx
         ret
+END(relocate_pages)
 
         .code32
 
-compatibility_mode:
+FUNC_LOCAL(compatibility_mode)
         /* Setup some sane segments. */
         movl    $0x0008, %eax
         movl    %eax, %ds
@@ -168,39 +172,29 @@ compatibility_mode:
         /* Call the image entry point.  This should never return. */
         call    *%ebp
         ud2
+END(compatibility_mode)
 
-        .align 4
-compat_mode_gdt_desc:
+DATA_LOCAL(compat_mode_gdt_desc, 4)
         .word .Lcompat_mode_gdt_end - compat_mode_gdt -1
         .quad 0x0000000000000000     /* set in call_32_bit above */
+END(compat_mode_gdt_desc)
 
-        .type compat_mode_gdt_desc, @object
-        .size compat_mode_gdt_desc, . - compat_mode_gdt_desc
-
-        .align 8
-compat_mode_gdt:
+DATA_LOCAL(compat_mode_gdt, 8)
         .quad 0x0000000000000000     /* null                              */
         .quad 0x00cf93000000ffff     /* 0x0008 ring 0 data                */
         .quad 0x00cf9b000000ffff     /* 0x0010 ring 0 code, compatibility */
 .Lcompat_mode_gdt_end:
+END(compat_mode_gdt)
 
-        .type compat_mode_gdt, @object
-        .size compat_mode_gdt, . - compat_mode_gdt
-
-compat_mode_idt:
+DATA_LOCAL(compat_mode_idt)
         .word 0                      /* limit */
         .long 0                      /* base */
-
-        .type compat_mode_idt, @object
-        .size compat_mode_idt, . - compat_mode_idt
+END(compat_mode_idt)
 
         /*
          * 16 words of stack are more than enough.
          */
-        .align 8
-reloc_stack:
+DATA_LOCAL(reloc_stack, 8)
         .fill 16,8,0
 .Lreloc_stack_base:
-
-        .type reloc_stack, @object
-        .size reloc_stack, . - reloc_stack
+END(reloc_stack)

[PATCH v7 05/11] x86: convert dom_crash_sync_extable() annotation

[Jan Beulich]

... to that from the generic framework in xen/linkage.h.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v7: Split from larger patch.

--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -624,7 +624,7 @@ domain_crash_page_fault_0x8:
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         movq  %rsi,%rdi
         call  show_page_walk
-ENTRY(dom_crash_sync_extable)
+LABEL(dom_crash_sync_extable, 0)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         # Get out of the guest-save area of the stack.
         GET_STACK_END(ax)

[PATCH v7 06/11] x86: move ENTRY(), GLOBAL(), and ALIGN

[Jan Beulich]

... to boot code, limiting their scope and thus allowing to drop
respective #undef-s from the linker script.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
---
An obvious alternative would be to convert boot code right away too, but
I think this has lower priority for now.
---
v7: Re-base.
v6: New.

--- a/xen/arch/x86/boot/head.S
+++ b/xen/arch/x86/boot/head.S
@@ -10,6 +10,15 @@
 #include <asm/cpufeature.h>
 #include <public/elfnote.h>
 
+#define ALIGN .align CONFIG_FUNCTION_ALIGNMENT, CODE_FILL
+#define ENTRY(name)                             \
+  ALIGN;                                        \
+  GLOBAL(name)
+#define GLOBAL(name)                            \
+  .globl name;                                  \
+  .hidden name;                                 \
+  name:
+
         .section .text.header, "ax", @progbits
         .code32
 
--- a/xen/arch/x86/include/asm/config.h
+++ b/xen/arch/x86/include/asm/config.h
@@ -42,14 +42,6 @@
 /* Linkage for x86 */
 #ifdef __ASSEMBLY__
 #define CODE_FILL 0x90
-#define ALIGN .align CONFIG_FUNCTION_ALIGNMENT, CODE_FILL
-#define ENTRY(name)                             \
-  ALIGN;                                        \
-  GLOBAL(name)
-#define GLOBAL(name)                            \
-  .globl name;                                  \
-  .hidden name;                                 \
-  name:
 #endif
 
 #define NR_hypercalls 64
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -1260,7 +1260,7 @@ FUNC_LOCAL(autogen_stubs, 0) /* Automati
         .if vec >= FIRST_IRQ_VECTOR
 #endif
 
-        ALIGN
+        .align CONFIG_FUNCTION_ALIGNMENT, CODE_FILL
 1:
         ENDBR64
         pushq $0
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -5,8 +5,6 @@
 #include <xen/lib.h>
 #include <xen/xen.lds.h>
 #include <asm/page.h>
-#undef ENTRY
-#undef ALIGN
 
 #ifdef EFI
 

[PATCH v7 07/11] Arm32: use new-style entry annotations for library code

[Jan Beulich]

No functional change, albeit all globals now become hidden, and aliasing
symbols (__aeabi_{u,}idiv) as well as __memzero lose their function-ness
and size.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
If the function-ness is important, some new construct would need
inventing. Not setting size for the aliases may even be desirable, as
I'm uncertain whether it is really legal in ELF that two entities
overlap in space.

I fear I'm breaking __memzero(), as I don't understand the purpose of
the ".word 0" next to where the FUNC_LOCAL() appears.
---
v7: New.

--- a/xen/arch/arm/arm32/lib/findbit.S
+++ b/xen/arch/arm/arm32/lib/findbit.S
@@ -20,7 +20,7 @@
  * Purpose  : Find a 'zero' bit
  * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
  */
-ENTRY(_find_first_zero_bit_le)
+FUNC(_find_first_zero_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
@@ -35,13 +35,13 @@ ENTRY(_find_first_zero_bit_le)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_zero_bit_le)
+END(_find_first_zero_bit_le)
 
 /*
  * Purpose  : Find next 'zero' bit
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(_find_next_zero_bit_le)
+FUNC(_find_next_zero_bit_le)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -55,13 +55,13 @@ ENTRY(_find_next_zero_bit_le)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_le)
+END(_find_next_zero_bit_le)
 
 /*
  * Purpose  : Find a 'one' bit
  * Prototype: int find_first_bit(const unsigned long *addr, unsigned int maxbit);
  */
-ENTRY(_find_first_bit_le)
+FUNC(_find_first_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
@@ -76,13 +76,13 @@ ENTRY(_find_first_bit_le)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_bit_le)
+END(_find_first_bit_le)
 
 /*
  * Purpose  : Find next 'one' bit
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(_find_next_bit_le)
+FUNC(_find_next_bit_le)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -95,11 +95,11 @@ ENTRY(_find_next_bit_le)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_le)
+END(_find_next_bit_le)
 
 #ifdef __ARMEB__
 
-ENTRY(_find_first_zero_bit_be)
+FUNC(_find_first_zero_bit_be)
 		teq	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -114,9 +114,9 @@ ENTRY(_find_first_zero_bit_be)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_zero_bit_be)
+END(_find_first_zero_bit_be)
 
-ENTRY(_find_next_zero_bit_be)
+FUNC(_find_next_zero_bit_be)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -131,9 +131,9 @@ ENTRY(_find_next_zero_bit_be)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_be)
+END(_find_next_zero_bit_be)
 
-ENTRY(_find_first_bit_be)
+FUNC(_find_first_bit_be)
 		teq	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -148,9 +148,9 @@ ENTRY(_find_first_bit_be)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_bit_be)
+END(_find_first_bit_be)
 
-ENTRY(_find_next_bit_be)
+FUNC(_find_next_bit_be)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -164,7 +164,7 @@ ENTRY(_find_next_bit_be)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_be)
+END(_find_next_bit_be)
 
 #endif
 
--- a/xen/arch/arm/arm32/lib/lib1funcs.S
+++ b/xen/arch/arm/arm32/lib/lib1funcs.S
@@ -201,8 +201,8 @@ along with this program; see the file CO
 .endm
 
 
-ENTRY(__udivsi3)
-ENTRY(__aeabi_uidiv)
+FUNC(__udivsi3)
+LABEL(__aeabi_uidiv)
 UNWIND(.fnstart)
 
 	subs	r2, r1, #1
@@ -228,10 +228,9 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__udivsi3)
-ENDPROC(__aeabi_uidiv)
+END(__udivsi3)
 
-ENTRY(__umodsi3)
+FUNC(__umodsi3)
 UNWIND(.fnstart)
 
 	subs	r2, r1, #1			@ compare divisor with 1
@@ -247,10 +246,10 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__umodsi3)
+END(__umodsi3)
 
-ENTRY(__divsi3)
-ENTRY(__aeabi_idiv)
+FUNC(__divsi3)
+LABEL(__aeabi_idiv)
 UNWIND(.fnstart)
 
 	cmp	r1, #0
@@ -289,10 +288,9 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__divsi3)
-ENDPROC(__aeabi_idiv)
+END(__divsi3)
 
-ENTRY(__modsi3)
+FUNC(__modsi3)
 UNWIND(.fnstart)
 
 	cmp	r1, #0
@@ -314,11 +312,11 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__modsi3)
+END(__modsi3)
 
 #ifdef CONFIG_AEABI
 
-ENTRY(__aeabi_uidivmod)
+FUNC(__aeabi_uidivmod)
 UNWIND(.fnstart)
 UNWIND(.save {r0, r1, ip, lr}	)
 
@@ -330,9 +328,9 @@ UNWIND(.save {r0, r1, ip, lr}	)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__aeabi_uidivmod)
+END(__aeabi_uidivmod)
 
-ENTRY(__aeabi_idivmod)
+FUNC(__aeabi_idivmod)
 UNWIND(.fnstart)
 UNWIND(.save {r0, r1, ip, lr}	)
 	stmfd	sp!, {r0, r1, ip, lr}
@@ -343,9 +341,9 @@ UNWIND(.save {r0, r1, ip, lr}	)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__aeabi_idivmod)
+END(__aeabi_idivmod)
 
-ENTRY(__aeabi_uldivmod)
+FUNC(__aeabi_uldivmod)
 UNWIND(.fnstart)
 UNWIND(.save {lr}	)
 	sub sp, sp, #8
@@ -357,9 +355,9 @@ UNWIND(.save {lr}	)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__aeabi_uldivmod)
+END(__aeabi_uldivmod)
 
-ENTRY(__aeabi_ldivmod)
+FUNC(__aeabi_ldivmod)
 UNWIND(.fnstart)
 UNWIND(.save {lr}	)
 	sub sp, sp, #16
@@ -371,10 +369,10 @@ UNWIND(.save {lr}	)
 	mov	pc, lr
 	
 UNWIND(.fnend)
-ENDPROC(__aeabi_ldivmod)
+END(__aeabi_ldivmod)
 #endif
 
-Ldiv0:
+FUNC_LOCAL(Ldiv0)
 UNWIND(.fnstart)
 UNWIND(.pad #4)
 UNWIND(.save {lr})
@@ -383,4 +381,4 @@ UNWIND(.save {lr})
 	mov	r0, #0			@ About as wrong as it could be.
 	ldr	pc, [sp], #8
 UNWIND(.fnend)
-ENDPROC(Ldiv0)
+END(Ldiv0)
--- a/xen/arch/arm/arm32/lib/lshrdi3.S
+++ b/xen/arch/arm/arm32/lib/lshrdi3.S
@@ -34,8 +34,8 @@ along with this program; see the file CO
 #define ah r1
 #endif
 
-ENTRY(__lshrdi3)
-ENTRY(__aeabi_llsr)
+FUNC(__lshrdi3)
+LABEL(__aeabi_llsr)
 
 	subs	r3, r2, #32
 	rsb	ip, r2, #32
@@ -47,5 +47,4 @@ ENTRY(__aeabi_llsr)
 	mov	ah, ah, lsr r2
 	mov	pc, lr
 
-ENDPROC(__lshrdi3)
-ENDPROC(__aeabi_llsr)
+END(__lshrdi3)
--- a/xen/arch/arm/arm32/lib/memchr.S
+++ b/xen/arch/arm/arm32/lib/memchr.S
@@ -12,8 +12,7 @@
 #include "assembler.h"
 
 	.text
-	.align	5
-ENTRY(memchr)
+FUNC(memchr, 32)
 	and	r1, r1, #0xff
 1:	subs	r2, r2, #1
 	bmi	2f
@@ -23,4 +22,4 @@ ENTRY(memchr)
 	sub	r0, r0, #1
 2:	movne	r0, #0
 	mov	pc, lr
-ENDPROC(memchr)
+END(memchr)
--- a/xen/arch/arm/arm32/lib/memcpy.S
+++ b/xen/arch/arm/arm32/lib/memcpy.S
@@ -54,8 +54,8 @@
 
 /* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
 
-ENTRY(memcpy)
+FUNC(memcpy)
 
 #include "copy_template.S"
 
-ENDPROC(memcpy)
+END(memcpy)
--- a/xen/arch/arm/arm32/lib/memmove.S
+++ b/xen/arch/arm/arm32/lib/memmove.S
@@ -24,7 +24,7 @@
  * occurring in the opposite direction.
  */
 
-ENTRY(memmove)
+FUNC(memmove)
 
 		subs	ip, r0, r1
 		cmphi	r2, ip
@@ -194,4 +194,4 @@ ENTRY(memmove)
 
 18:		backward_copy_shift	push=24	pull=8
 
-ENDPROC(memmove)
+END(memmove)
--- a/xen/arch/arm/arm32/lib/memset.S
+++ b/xen/arch/arm/arm32/lib/memset.S
@@ -12,9 +12,8 @@
 #include "assembler.h"
 
 	.text
-	.align	5
 
-ENTRY(memset)
+FUNC(memset, 32)
 	and	r1, r1, #0xff
 	ands	r3, r0, #3		@ 1 unaligned?
 	mov	ip, r0			@ preserve r0 as return value
@@ -120,4 +119,4 @@ ENTRY(memset)
 	strb	r1, [ip], #1		@ 1
 	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
 	b	1b
-ENDPROC(memset)
+END(memset)
--- a/xen/arch/arm/arm32/lib/memzero.S
+++ b/xen/arch/arm/arm32/lib/memzero.S
@@ -10,7 +10,7 @@
 #include "assembler.h"
 
 	.text
-	.align	5
+FUNC_LOCAL(_memzero_, 32)
 	.word	0
 /*
  * Align the pointer in r0.  r3 contains the number of bytes that we are
@@ -29,7 +29,7 @@
  * memzero again.
  */
 
-ENTRY(__memzero)
+LABEL(__memzero)
 	mov	r2, #0			@ 1
 	ands	r3, r0, #3		@ 1 unaligned?
 	bne	1b			@ 1
@@ -121,4 +121,4 @@ ENTRY(__memzero)
 	tst	r1, #1			@ 1 a byte left over
 	strneb	r2, [r0], #1		@ 1
 	mov	pc, lr			@ 1
-ENDPROC(__memzero)
+END(_memzero_)
--- a/xen/arch/arm/arm32/lib/strchr.S
+++ b/xen/arch/arm/arm32/lib/strchr.S
@@ -14,8 +14,7 @@
 #include "assembler.h"
 
 		.text
-		.align	5
-ENTRY(strchr)
+FUNC(strchr, 32)
 		and	r1, r1, #0xff
 1:		ldrb	r2, [r0], #1
 		teq	r2, r1
@@ -25,4 +24,4 @@ ENTRY(strchr)
 		movne	r0, #0
 		subeq	r0, r0, #1
 		mov	pc, lr
-ENDPROC(strchr)
+END(strchr)
--- a/xen/arch/arm/arm32/lib/strrchr.S
+++ b/xen/arch/arm/arm32/lib/strrchr.S
@@ -12,8 +12,7 @@
 #include "assembler.h"
 
 		.text
-		.align	5
-ENTRY(strrchr)
+FUNC(strrchr, 32)
 		and	r1, r1, #0xff
 		mov	r3, #0
 1:		ldrb	r2, [r0], #1
@@ -23,4 +22,4 @@ ENTRY(strrchr)
 		bne	1b
 		mov	r0, r3
 		mov	pc, lr
-ENDPROC(strrchr)
+END(strrchr)

[PATCH v7 08/11] Arm32: use new-style entry annotations for MMU code

[Jan Beulich]

Locally override SYM_PUSH_SECTION() to retain the intended section
association.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v7: New.

--- a/xen/arch/arm/arm32/mmu/head.S
+++ b/xen/arch/arm/arm32/mmu/head.S
@@ -160,6 +160,13 @@
 .endm
 
 .section .text.idmap, "ax", %progbits
+/*
+ * Code below wants to all live in the section established above.  Annotations
+ * from xen/linkage.h therefore may not switch sections (honoring
+ * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
+ */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
 
 /*
  * Rebuild the boot pagetable's first-level entries. The structure
@@ -174,7 +181,7 @@
  *
  * Clobbers r0 - r5
  */
-create_page_tables:
+FUNC_LOCAL(create_page_tables)
         /* Prepare the page-tables for mapping Xen */
         mov_w r0, XEN_VIRT_START
 
@@ -263,7 +270,7 @@ use_temporary_mapping:
 
         mov   r12, #1                /* r12 := temporary mapping created */
         mov   pc, lr
-ENDPROC(create_page_tables)
+END(create_page_tables)
 
 /*
  * Turn on the Data Cache and the MMU. The function will return
@@ -276,7 +283,7 @@ ENDPROC(create_page_tables)
  *
  * Clobbers r0 - r5
  */
-enable_mmu:
+FUNC_LOCAL(enable_mmu)
         PRINT("- Turning on paging -\r\n")
 
         /*
@@ -346,7 +353,7 @@ enable_mmu:
         teq   r12, #0
         beq   remove_identity_mapping
         b     remove_temporary_mapping
-ENDPROC(enable_mmu)
+END(enable_mmu)
 
 /*
  * Switch to the runtime mapping. The logic depends on whether the
@@ -366,7 +373,7 @@ ENDPROC(enable_mmu)
  *
  * Clobbers r0 - r4
  */
-switch_to_runtime_mapping:
+FUNC_LOCAL(switch_to_runtime_mapping)
         /*
          * Jump to the runtime mapping if the virt and phys are not
          * clashing
@@ -411,7 +418,7 @@ ready_to_switch:
         PRINT_ID("- Jumping to runtime address -\r\n")
 
         mov   pc, lr
-ENDPROC(switch_to_runtime_mapping)
+END(switch_to_runtime_mapping)
 
 /*
  * Enable mm (turn on the data cache and the MMU) for secondary CPUs.
@@ -428,7 +435,7 @@ ENDPROC(switch_to_runtime_mapping)
  *
  * Clobbers r0 - r6
  */
-ENTRY(enable_secondary_cpu_mm)
+FUNC(enable_secondary_cpu_mm)
         mov   r6, lr
 
         bl    create_page_tables
@@ -456,7 +463,7 @@ ENTRY(enable_secondary_cpu_mm)
 
         /* Return to the virtual address requested by the caller. */
         mov   pc, r6
-ENDPROC(enable_secondary_cpu_mm)
+END(enable_secondary_cpu_mm)
 
 /*
  * Enable mm (turn on the data cache and the MMU) for the boot CPU.
@@ -474,7 +481,7 @@ ENDPROC(enable_secondary_cpu_mm)
  *
  * Clobbers r0 - r6
  */
-ENTRY(enable_boot_cpu_mm)
+FUNC(enable_boot_cpu_mm)
         mov   r6, lr
 
 #ifdef CONFIG_EARLY_PRINTK
@@ -491,7 +498,7 @@ ENTRY(enable_boot_cpu_mm)
         /* Address in the runtime mapping to jump to after the MMU is enabled */
         mov   lr, r6
         b     enable_mmu
-ENDPROC(enable_boot_cpu_mm)
+END(enable_boot_cpu_mm)
 
 /*
  * Remove the 1:1 map from the page-tables. It is not easy to keep track
@@ -503,7 +510,7 @@ ENDPROC(enable_boot_cpu_mm)
  *
  * Clobbers r0 - r3
  */
-remove_identity_mapping:
+FUNC_LOCAL(remove_identity_mapping)
         PRINT("- Removing the identity mapping -\r\n")
 
         /* r2:r3 := invalid page-table entry */
@@ -518,14 +525,14 @@ remove_identity_mapping:
 
         flush_xen_tlb_local r0
         mov   pc, lr
-ENDPROC(remove_identity_mapping)
+END(remove_identity_mapping)
 
 /*
  * Remove the temporary mapping of Xen starting at TEMPORARY_XEN_VIRT_START.
  *
  * Clobbers r0 - r3
  */
-remove_temporary_mapping:
+FUNC_LOCAL(remove_temporary_mapping)
         PRINT("- Removing the temporary mapping -\r\n")
 
         /* r2:r3 := invalid page-table entry */
@@ -541,13 +548,14 @@ remove_temporary_mapping:
         flush_xen_tlb_local r0
 
         mov  pc, lr
-ENDPROC(remove_temporary_mapping)
+END(remove_temporary_mapping)
 
 /* Fail-stop */
-fail:   PRINT("- Boot failed -\r\n")
+FUNC_LOCAL(fail)
+        PRINT("- Boot failed -\r\n")
 1:      wfe
         b     1b
-ENDPROC(fail)
+END(fail)
 
 /*
  * Switch TTBR
@@ -555,7 +563,7 @@ ENDPROC(fail)
  *
  * TODO: This code does not comply with break-before-make.
  */
-ENTRY(switch_ttbr)
+FUNC(switch_ttbr)
         dsb                            /* Ensure the flushes happen before
                                         * continuing */
         isb                            /* Ensure synchronization with previous
@@ -579,4 +587,4 @@ ENTRY(switch_ttbr)
         isb
 
         mov pc, lr
-ENDPROC(switch_ttbr)
+END(switch_ttbr)

[PATCH v7 09/11] Arm32: use new-style entry annotations for entry code

[Jan Beulich]

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
Should the GLOBAL()s also be replaced?
---
v7: New.

--- a/xen/arch/arm/arm32/entry.S
+++ b/xen/arch/arm/arm32/entry.S
@@ -31,7 +31,7 @@
  *  r4: Set to a non-zero value if a pending Abort exception took place.
  *      Otherwise, it will be set to zero.
  */
-prepare_context_from_guest:
+FUNC_LOCAL(prepare_context_from_guest)
 #ifdef CONFIG_ARM32_HARDEN_BRANCH_PREDICTOR
         /*
          * Restore vectors table to the default as it may have been
@@ -140,7 +140,7 @@ abort_guest_exit_end:
 
 skip_check:
         b   enter_hypervisor_from_guest_preirq
-ENDPROC(prepare_context_from_guest)
+END(prepare_context_from_guest)
 
         /*
          * Macro to define a trap entry.
@@ -362,13 +362,13 @@ trap_irq:
 trap_fiq:
         vector fiq
 
-return_from_trap:
+LABEL_LOCAL(return_from_trap)
         /*
          * Restore the stack pointer from r11. It was saved on exception
          * entry (see __DEFINE_TRAP_ENTRY).
          */
         mov sp, r11
-ENTRY(return_to_new_vcpu32)
+LABEL(return_to_new_vcpu32)
         ldr r11, [sp, #UREGS_cpsr]
         and r11, #PSR_MODE_MASK
         cmp r11, #PSR_MODE_HYP
@@ -426,6 +426,7 @@ return_to_hypervisor:
         clrex
         eret
         sb
+END(return_from_trap)
 
 /*
  * struct vcpu *__context_switch(struct vcpu *prev, struct vcpu *next)
@@ -435,12 +436,13 @@ return_to_hypervisor:
  *
  * Returns prev in r0
  */
-ENTRY(__context_switch)
+FUNC(__context_switch)
         add     ip, r0, #VCPU_arch_saved_context
         stmia   ip!, {r4 - sl, fp, sp, lr}      /* Save register state */
 
         add     r4, r1, #VCPU_arch_saved_context
         ldmia   r4, {r4 - sl, fp, sp, pc}       /* Load registers and return */
+END(__context_switch)
 
 /*
  * Local variables:

[PATCH v7 10/11] Arm32: use new-style entry annotations in head.S

[Jan Beulich]

Locally override SYM_PUSH_SECTION() to retain the intended section
association.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v7: New.

--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -48,13 +48,20 @@
 
         .section .text.header, "ax", %progbits
         .arm
+/*
+ * Code below wants to all live in the section established above.  Annotations
+ * from xen/linkage.h therefore may not switch sections (honoring
+ * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
+ */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
 
         /*
          * This must be the very first address in the loaded image.
          * It should be linked at XEN_VIRT_START, and loaded at any
          * 4K-aligned address.
          */
-GLOBAL(start)
+FUNC(start)
         /*
          * zImage magic header, see:
          * http://www.simtec.co.uk/products/SWLINUX/files/booting_article.html#d0e309
@@ -104,9 +111,9 @@ primary_switched:
         mov   r0, r8                 /* r0 := paddr(FDT) */
         mov_w r1, start_xen
         b     launch
-ENDPROC(start)
+END(start)
 
-GLOBAL(init_secondary)
+FUNC(init_secondary)
         cpsid aif                    /* Disable all interrupts */
 
         /* Find out where we are */
@@ -142,7 +149,7 @@ secondary_switched:
         /* Jump to C world */
         mov_w r1, start_secondary
         b     launch
-ENDPROC(init_secondary)
+END(init_secondary)
 
 /*
  * Check if the CPU supports virtualization extensions and has been booted
@@ -154,7 +161,7 @@ ENDPROC(init_secondary)
  *
  * Clobbers r0 - r3
  */
-check_cpu_mode:
+FUNC_LOCAL(check_cpu_mode)
         /* Check that this CPU has Hyp mode */
         mrc   CP32(r0, ID_PFR1)
         and   r0, r0, #0xf000        /* Bits 12-15 define virt extensions */
@@ -174,14 +181,14 @@ check_cpu_mode:
         PRINT("- Xen must be entered in NS Hyp mode -\r\n")
         PRINT("- Please update the bootloader -\r\n")
         b     fail
-ENDPROC(check_cpu_mode)
+END(check_cpu_mode)
 
 /*
  * Zero BSS
  *
  * Clobbers r0 - r3
  */
-zero_bss:
+FUNC_LOCAL(zero_bss)
         PRINT("- Zero BSS -\r\n")
         mov_w r0, __bss_start        /* r0 := vaddr(__bss_start) */
         mov_w r1, __bss_end          /* r1 := vaddr(__bss_end)   */
@@ -192,9 +199,9 @@ zero_bss:
         blo   1b
 
         mov   pc, lr
-ENDPROC(zero_bss)
+END(zero_bss)
 
-cpu_init:
+FUNC_LOCAL(cpu_init)
         PRINT("- Setting up control registers -\r\n")
 
         mov   r5, lr                       /* r5 := return address */
@@ -235,7 +242,7 @@ cpu_init_done:
         isb
 
         mov   pc, r5                        /* Return address is in r5 */
-ENDPROC(cpu_init)
+END(cpu_init)
 
 /*
  * Setup the initial stack and jump to the C world
@@ -246,7 +253,7 @@ ENDPROC(cpu_init)
  *
  * Clobbers r3
  */
-launch:
+FUNC_LOCAL(launch)
         mov_w r3, init_data
         add   r3, #INITINFO_stack    /* Find the boot-time stack */
         ldr   sp, [r3]
@@ -255,13 +262,14 @@ launch:
 
         /* Jump to C world */
        bx    r1
-ENDPROC(launch)
+END(launch)
 
 /* Fail-stop */
-fail:   PRINT("- Boot failed -\r\n")
+FUNC_LOCAL(fail)
+        PRINT("- Boot failed -\r\n")
 1:      wfe
         b     1b
-ENDPROC(fail)
+END(fail)
 
 #ifdef CONFIG_EARLY_PRINTK
 /*
@@ -272,14 +280,14 @@ ENDPROC(fail)
  *
  * Clobbers r0 - r3
  */
-init_uart:
+FUNC_LOCAL(init_uart)
         mov_w r11, CONFIG_EARLY_UART_BASE_ADDRESS
 #ifdef CONFIG_EARLY_UART_INIT
         early_uart_init r11, r1, r2
 #endif
         PRINT("- UART enabled -\r\n")
         mov   pc, lr
-ENDPROC(init_uart)
+END(init_uart)
 
 /*
  * Print early debug messages.
@@ -288,14 +296,14 @@ ENDPROC(init_uart)
  * r11: Early UART base address
  * Clobbers r0-r1
  */
-ENTRY(asm_puts)
+FUNC(asm_puts)
         early_uart_ready r11, r1
         ldrb  r1, [r0], #1           /* Load next char */
         teq   r1, #0                 /* Exit on nul */
         moveq pc, lr
         early_uart_transmit r11, r1
         b asm_puts
-ENDPROC(asm_puts)
+END(asm_puts)
 
 /*
  * Print a 32-bit number in hex.
@@ -304,7 +312,7 @@ ENDPROC(asm_puts)
  * r11: Early UART base address
  * Clobbers r0-r3
  */
-ENTRY(asm_putn)
+FUNC(asm_putn)
         adr_l r1, hex
         mov   r3, #8
 1:
@@ -316,18 +324,19 @@ ENTRY(asm_putn)
         subs  r3, r3, #1
         bne   1b
         mov   pc, lr
-ENDPROC(asm_putn)
+END(asm_putn)
 
 RODATA_SECT(.rodata.idmap, hex, "0123456789abcdef")
 
 #endif /* CONFIG_EARLY_PRINTK */
 
 /* This provides a C-API version of __lookup_processor_type */
-ENTRY(lookup_processor_type)
+FUNC(lookup_processor_type)
         stmfd sp!, {r4, lr}
         bl    __lookup_processor_type
         mov r0, r1
         ldmfd sp!, {r4, pc}
+END(lookup_processor_type)
 
 /*
  * Read processor ID register (CP#15, CR0), and Look up in the linker-built
@@ -338,7 +347,7 @@ ENTRY(lookup_processor_type)
  * r1: proc_info pointer
  * Clobbers r2-r4
  */
-__lookup_processor_type:
+FUNC_LOCAL(__lookup_processor_type)
         mrc   CP32(r0, MIDR)                /* r0 := our cpu id */
         adr_l r1, __proc_info_start
         adr_l r2, __proc_info_end
@@ -354,7 +363,7 @@ __lookup_processor_type:
         mov   r1, #0
 2:
         mov   pc, lr
-ENDPROC(__lookup_processor_type)
+END(__lookup_processor_type)
 
 /*
  * Local variables:

[PATCH v7 11/11] Arm: purge ENTRY(), ENDPROC(), and ALIGN

[Jan Beulich]

They're no longer used. This also makes it unnecessary to #undef two of
them in the linker script.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v7: New.

--- a/xen/arch/arm/include/asm/config.h
+++ b/xen/arch/arm/include/asm/config.h
@@ -53,17 +53,9 @@
 
 /* Linkage for ARM */
 #ifdef __ASSEMBLY__
-#define ALIGN .balign CONFIG_FUNCTION_ALIGNMENT
-#define ENTRY(name)                             \
-  .globl name;                                  \
-  ALIGN;                                        \
-  name:
 #define GLOBAL(name)                            \
   .globl name;                                  \
   name:
-#define ENDPROC(name) \
-  .type name, %function; \
-  END(name)
 #endif
 
 #include <xen/const.h>
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -6,8 +6,6 @@
 #include <xen/lib.h>
 #include <xen/xen.lds.h>
 #include <asm/page.h>
-#undef ENTRY
-#undef ALIGN
 
 ENTRY(start)
 

Re: [PATCH v7 08/11] Arm32: use new-style entry annotations for MMU code

[Jan Beulich]

On 01.10.2024 17:16, Jan Beulich wrote:
> Locally override SYM_PUSH_SECTION() to retain the intended section
> association.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> v7: New.

I'm sorry, I failed to Cc maintainers here.

Jan

> --- a/xen/arch/arm/arm32/mmu/head.S
> +++ b/xen/arch/arm/arm32/mmu/head.S
> @@ -160,6 +160,13 @@
>  .endm
>  
>  .section .text.idmap, "ax", %progbits
> +/*
> + * Code below wants to all live in the section established above.  Annotations
> + * from xen/linkage.h therefore may not switch sections (honoring
> + * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
> + */
> +#undef SYM_PUSH_SECTION
> +#define SYM_PUSH_SECTION(name, attr)
>  
>  /*
>   * Rebuild the boot pagetable's first-level entries. The structure
> @@ -174,7 +181,7 @@
>   *
>   * Clobbers r0 - r5
>   */
> -create_page_tables:
> +FUNC_LOCAL(create_page_tables)
>          /* Prepare the page-tables for mapping Xen */
>          mov_w r0, XEN_VIRT_START
>  
> @@ -263,7 +270,7 @@ use_temporary_mapping:
>  
>          mov   r12, #1                /* r12 := temporary mapping created */
>          mov   pc, lr
> -ENDPROC(create_page_tables)
> +END(create_page_tables)
>  
>  /*
>   * Turn on the Data Cache and the MMU. The function will return
> @@ -276,7 +283,7 @@ ENDPROC(create_page_tables)
>   *
>   * Clobbers r0 - r5
>   */
> -enable_mmu:
> +FUNC_LOCAL(enable_mmu)
>          PRINT("- Turning on paging -\r\n")
>  
>          /*
> @@ -346,7 +353,7 @@ enable_mmu:
>          teq   r12, #0
>          beq   remove_identity_mapping
>          b     remove_temporary_mapping
> -ENDPROC(enable_mmu)
> +END(enable_mmu)
>  
>  /*
>   * Switch to the runtime mapping. The logic depends on whether the
> @@ -366,7 +373,7 @@ ENDPROC(enable_mmu)
>   *
>   * Clobbers r0 - r4
>   */
> -switch_to_runtime_mapping:
> +FUNC_LOCAL(switch_to_runtime_mapping)
>          /*
>           * Jump to the runtime mapping if the virt and phys are not
>           * clashing
> @@ -411,7 +418,7 @@ ready_to_switch:
>          PRINT_ID("- Jumping to runtime address -\r\n")
>  
>          mov   pc, lr
> -ENDPROC(switch_to_runtime_mapping)
> +END(switch_to_runtime_mapping)
>  
>  /*
>   * Enable mm (turn on the data cache and the MMU) for secondary CPUs.
> @@ -428,7 +435,7 @@ ENDPROC(switch_to_runtime_mapping)
>   *
>   * Clobbers r0 - r6
>   */
> -ENTRY(enable_secondary_cpu_mm)
> +FUNC(enable_secondary_cpu_mm)
>          mov   r6, lr
>  
>          bl    create_page_tables
> @@ -456,7 +463,7 @@ ENTRY(enable_secondary_cpu_mm)
>  
>          /* Return to the virtual address requested by the caller. */
>          mov   pc, r6
> -ENDPROC(enable_secondary_cpu_mm)
> +END(enable_secondary_cpu_mm)
>  
>  /*
>   * Enable mm (turn on the data cache and the MMU) for the boot CPU.
> @@ -474,7 +481,7 @@ ENDPROC(enable_secondary_cpu_mm)
>   *
>   * Clobbers r0 - r6
>   */
> -ENTRY(enable_boot_cpu_mm)
> +FUNC(enable_boot_cpu_mm)
>          mov   r6, lr
>  
>  #ifdef CONFIG_EARLY_PRINTK
> @@ -491,7 +498,7 @@ ENTRY(enable_boot_cpu_mm)
>          /* Address in the runtime mapping to jump to after the MMU is enabled */
>          mov   lr, r6
>          b     enable_mmu
> -ENDPROC(enable_boot_cpu_mm)
> +END(enable_boot_cpu_mm)
>  
>  /*
>   * Remove the 1:1 map from the page-tables. It is not easy to keep track
> @@ -503,7 +510,7 @@ ENDPROC(enable_boot_cpu_mm)
>   *
>   * Clobbers r0 - r3
>   */
> -remove_identity_mapping:
> +FUNC_LOCAL(remove_identity_mapping)
>          PRINT("- Removing the identity mapping -\r\n")
>  
>          /* r2:r3 := invalid page-table entry */
> @@ -518,14 +525,14 @@ remove_identity_mapping:
>  
>          flush_xen_tlb_local r0
>          mov   pc, lr
> -ENDPROC(remove_identity_mapping)
> +END(remove_identity_mapping)
>  
>  /*
>   * Remove the temporary mapping of Xen starting at TEMPORARY_XEN_VIRT_START.
>   *
>   * Clobbers r0 - r3
>   */
> -remove_temporary_mapping:
> +FUNC_LOCAL(remove_temporary_mapping)
>          PRINT("- Removing the temporary mapping -\r\n")
>  
>          /* r2:r3 := invalid page-table entry */
> @@ -541,13 +548,14 @@ remove_temporary_mapping:
>          flush_xen_tlb_local r0
>  
>          mov  pc, lr
> -ENDPROC(remove_temporary_mapping)
> +END(remove_temporary_mapping)
>  
>  /* Fail-stop */
> -fail:   PRINT("- Boot failed -\r\n")
> +FUNC_LOCAL(fail)
> +        PRINT("- Boot failed -\r\n")
>  1:      wfe
>          b     1b
> -ENDPROC(fail)
> +END(fail)
>  
>  /*
>   * Switch TTBR
> @@ -555,7 +563,7 @@ ENDPROC(fail)
>   *
>   * TODO: This code does not comply with break-before-make.
>   */
> -ENTRY(switch_ttbr)
> +FUNC(switch_ttbr)
>          dsb                            /* Ensure the flushes happen before
>                                          * continuing */
>          isb                            /* Ensure synchronization with previous
> @@ -579,4 +587,4 @@ ENTRY(switch_ttbr)
>          isb
>  
>          mov pc, lr
> -ENDPROC(switch_ttbr)
> +END(switch_ttbr)
> 

Re: [PATCH v7 03/11] x86/ACPI: annotate assembly function/data with type and size

[Andrew Cooper]

On 01/10/2024 4:14 pm, Jan Beulich wrote:
> Use the generic framework from xen/linkage.h.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Acked-by: Andrew Cooper <andrew.cooper3@citrix.com> although...

> ---
> v7: Make do_suspend_lowlevel() a single function.
> v6: New.
>
> --- a/xen/arch/x86/acpi/wakeup_prot.S
> +++ b/xen/arch/x86/acpi/wakeup_prot.S
> @@ -7,7 +7,7 @@
>          .text
>          .code64
>  
> -ENTRY(do_suspend_lowlevel)
> +FUNC(do_suspend_lowlevel)
>          push    %rbp
>          push    %rbx
>          push    %r12
> @@ -43,7 +43,7 @@ ENTRY(do_suspend_lowlevel)
>           *
>           * Everything else, including the stack, needs restoring.
>           */
> -ENTRY(s3_resume)
> +LABEL(s3_resume)
>          lgdt    boot_gdtr(%rip)
>  
>          mov     saved_cr0(%rip), %rax
> @@ -132,6 +132,7 @@ ENTRY(s3_resume)
>          pop     %rbx
>          pop     %rbp
>          ret
> +END(do_suspend_lowlevel)
>  
>  .data
>          .align 16
> @@ -142,5 +143,4 @@ saved_cr0:      .quad   0
>  saved_ssp:      .quad   0
>  #endif

... we do need something for these 3 variables, or they want to move
into a C file.

~Andrew

Re: [PATCH v7 02/11] VMX: convert entry point annotations

[Andrew Cooper]

On 01/10/2024 4:13 pm, Jan Beulich wrote:
> Use the generic framework from xen/linkage.h.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>

Re: [PATCH v7 05/11] x86: convert dom_crash_sync_extable() annotation

[Andrew Cooper]

On 01/10/2024 4:15 pm, Jan Beulich wrote:
> ... to that from the generic framework in xen/linkage.h.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>

Re: [PATCH v7 04/11] x86/kexec: convert entry point annotations

[Andrew Cooper]

On 01/10/2024 4:15 pm, Jan Beulich wrote:
> Use the generic framework from xen/linkage.h.
>
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>

Re: [PATCH v7 03/11] x86/ACPI: annotate assembly function/data with type and size

[Jan Beulich]

On 01.10.2024 18:51, Andrew Cooper wrote:
> On 01/10/2024 4:14 pm, Jan Beulich wrote:
>> Use the generic framework from xen/linkage.h.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> 
> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com> although...

Thanks.

>> @@ -132,6 +132,7 @@ ENTRY(s3_resume)
>>          pop     %rbx
>>          pop     %rbp
>>          ret
>> +END(do_suspend_lowlevel)
>>  
>>  .data
>>          .align 16
>> @@ -142,5 +143,4 @@ saved_cr0:      .quad   0
>>  saved_ssp:      .quad   0
>>  #endif
> 
> ... we do need something for these 3 variables, or they want to move
> into a C file.

We have DATA_LOCAL(). Moving to a C file would be odd, as they're not used
outside of this file (and hence aren't global).

Jan

Ping: [PATCH v7 00/11] (mostly) x86+Arm32: add/convert entry point annotations

[Jan Beulich]

On 01.10.2024 17:11, Jan Beulich wrote:
> 01: common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions
> 02: VMX: convert entry point annotations
> 03: x86/ACPI: annotate assembly functions with type and size
> 04: x86/kexec: convert entry point annotations
> 05: x86: convert dom_crash_sync_extable() annotation
> 06: x86: move ENTRY(), GLOBAL(), and ALIGN
> 07: Arm32: use new-style entry annotations for library code
> 08: Arm32: use new-style entry annotations for MMU code
> 09: Arm32: use new-style entry annotations for entry code
> 10: Arm32: use new-style entry annotations in head.S
> 11: Arm: purge ENTRY(), ENDPROC(), and ALIGN

Patches 2-6 went in. Arm maintainers - what about 7-11?

Jan

Re: [PATCH v7 07/11] Arm32: use new-style entry annotations for library code

[Julien Grall]

Hi Jan,

Sorry for the late answer.

On 01/10/2024 16:16, Jan Beulich wrote:
> No functional change, albeit all globals now become hidden, and aliasing
> symbols (__aeabi_{u,}idiv) as well as __memzero lose their function-ness
> and size.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> If the function-ness is important, some new construct would need
> inventing. Not setting size for the aliases may even be desirable, as
> I'm uncertain whether it is really legal in ELF that two entities
> overlap in space.

I can't think of a reason where we would need the "function-ness".

> 
> I fear I'm breaking __memzero(), as I don't understand the purpose of
> the ".word 0" next to where the FUNC_LOCAL() appears.

I am not entirely sure either. AFAIK, "0" is not a valid instruction.

This code was taken from Linux, the history doesn't give much clue 
because it seems the ".word 0" was added before Linux used git.

However, it looks like Linux replace __memzero with memset() 6 years ago 
on arm32. So maybe we should get rid of it? This would at least avoid 
worrying on the purpose of ".word 0".

The rest of the patch looks good to me.

Cheers,

-- 
Julien Grall

Re: [PATCH v7 09/11] Arm32: use new-style entry annotations for entry code

[Julien Grall]

Hi Jan,

On 01/10/2024 16:17, Jan Beulich wrote:
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> Should the GLOBAL()s also be replaced?

What would you replace them with?

> ---
> v7: New.
> 
> --- a/xen/arch/arm/arm32/entry.S
> +++ b/xen/arch/arm/arm32/entry.S
> @@ -31,7 +31,7 @@
>    *  r4: Set to a non-zero value if a pending Abort exception took place.
>    *      Otherwise, it will be set to zero.
>    */
> -prepare_context_from_guest:
> +FUNC_LOCAL(prepare_context_from_guest)
>   #ifdef CONFIG_ARM32_HARDEN_BRANCH_PREDICTOR
>           /*
>            * Restore vectors table to the default as it may have been
> @@ -140,7 +140,7 @@ abort_guest_exit_end:
>   
>   skip_check:
>           b   enter_hypervisor_from_guest_preirq
> -ENDPROC(prepare_context_from_guest)
> +END(prepare_context_from_guest)
>   
>           /*
>            * Macro to define a trap entry.
> @@ -362,13 +362,13 @@ trap_irq:
>   trap_fiq:
>           vector fiq
>   
> -return_from_trap:
> +LABEL_LOCAL(return_from_trap)

OOI, why do we need to annotate return_from_trap?

>           /*
>            * Restore the stack pointer from r11. It was saved on exception
>            * entry (see __DEFINE_TRAP_ENTRY).
>            */
>           mov sp, r11
> -ENTRY(return_to_new_vcpu32)
> +LABEL(return_to_new_vcpu32)

I am a bit confused why this is a LABEL rather than a FUNC. But I wonder 
if either of them are corrrect? The code above is meant to fall into 
this one. So I think at least the alignment should be 0.

>           ldr r11, [sp, #UREGS_cpsr]
>           and r11, #PSR_MODE_MASK
>           cmp r11, #PSR_MODE_HYP
> @@ -426,6 +426,7 @@ return_to_hypervisor:
>           clrex
>           eret
>           sb
> +END(return_from_trap)
>   
>   /*
>    * struct vcpu *__context_switch(struct vcpu *prev, struct vcpu *next)
> @@ -435,12 +436,13 @@ return_to_hypervisor:
>    *
>    * Returns prev in r0
>    */
> -ENTRY(__context_switch)
> +FUNC(__context_switch)
>           add     ip, r0, #VCPU_arch_saved_context
>           stmia   ip!, {r4 - sl, fp, sp, lr}      /* Save register state */
>   
>           add     r4, r1, #VCPU_arch_saved_context
>           ldmia   r4, {r4 - sl, fp, sp, pc}       /* Load registers and return */
> +END(__context_switch)
>   
>   /*
>    * Local variables:
> 

Cheers,

-- 
Julien Grall

Re: [PATCH v7 10/11] Arm32: use new-style entry annotations in head.S

[Julien Grall]

Hi Jan,

On 01/10/2024 16:17, Jan Beulich wrote:
> Locally override SYM_PUSH_SECTION() to retain the intended section
> association.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> ---
> v7: New.
> 
> --- a/xen/arch/arm/arm32/head.S
> +++ b/xen/arch/arm/arm32/head.S
> @@ -48,13 +48,20 @@
>   
>           .section .text.header, "ax", %progbits
>           .arm
> +/*
> + * Code below wants to all live in the section established above.  Annotations
> + * from xen/linkage.h therefore may not switch sections (honoring
> + * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
> + */
> +#undef SYM_PUSH_SECTION
> +#define SYM_PUSH_SECTION(name, attr)

Are you suggesting the code in arch/*/head.S has a latent bug?

The rest lgtm to me pending the clarification.

Cheers,

-- 
Julien Grall

Re: [PATCH v7 11/11] Arm: purge ENTRY(), ENDPROC(), and ALIGN

[Julien Grall]

Hi Jan,

On 01/10/2024 16:18, Jan Beulich wrote:
> They're no longer used. This also makes it unnecessary to #undef two of
> them in the linker script.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>

Acked-by: Julien Grall <jgrall@amazon.com>

Cheers,

-- 
Julien Grall

Re: [PATCH v7 07/11] Arm32: use new-style entry annotations for library code

[Jan Beulich]

On 25.11.2024 21:15, Julien Grall wrote:
> Hi Jan,
> 
> Sorry for the late answer.
> 
> On 01/10/2024 16:16, Jan Beulich wrote:
>> No functional change, albeit all globals now become hidden, and aliasing
>> symbols (__aeabi_{u,}idiv) as well as __memzero lose their function-ness
>> and size.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> ---
>> If the function-ness is important, some new construct would need
>> inventing. Not setting size for the aliases may even be desirable, as
>> I'm uncertain whether it is really legal in ELF that two entities
>> overlap in space.
> 
> I can't think of a reason where we would need the "function-ness".

Good, thanks for confirming.

>> I fear I'm breaking __memzero(), as I don't understand the purpose of
>> the ".word 0" next to where the FUNC_LOCAL() appears.
> 
> I am not entirely sure either. AFAIK, "0" is not a valid instruction.
> 
> This code was taken from Linux, the history doesn't give much clue 
> because it seems the ".word 0" was added before Linux used git.

My vague guess is that this is a crude way of arranging for desired
alignment of labels later in the function. That wouldn't require use
of .word (could simply be a nop), yet what specifically is used there
doesn't matter for the patch here.

> However, it looks like Linux replace __memzero with memset() 6 years ago 
> on arm32. So maybe we should get rid of it? This would at least avoid 
> worrying on the purpose of ".word 0".

Certainly an option, yet may I remind you of your replies [1], [2] to
a much older patch of mine, which I still have pending for the
suggested removal never having happened? I fear the patch here may get
stuck over this just like the other one did.

Jan

[1] https://lists.xen.org/archives/html/xen-devel/2022-08/msg01185.html
[2] https://lists.xen.org/archives/html/xen-devel/2022-08/msg01190.html

Re: [PATCH v7 09/11] Arm32: use new-style entry annotations for entry code

[Jan Beulich]

On 25.11.2024 21:25, Julien Grall wrote:
> On 01/10/2024 16:17, Jan Beulich wrote:
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> ---
>> Should the GLOBAL()s also be replaced?
> 
> What would you replace them with?

LABEL() or, perhaps better, DATA()/END() pairs.

>> @@ -362,13 +362,13 @@ trap_irq:
>>   trap_fiq:
>>           vector fiq
>>   
>> -return_from_trap:
>> +LABEL_LOCAL(return_from_trap)
> 
> OOI, why do we need to annotate return_from_trap?

We don't _need_ to; it's for consistency. Please advise whether you want me
to drop that change (it's the only use of LABEL_LOCAL() throughout the series).
But please be aware that then END(return_from_trap) also needs dropping (i.e.
leaving the range uncovered as far as plain ELF metadata goes).

>>           /*
>>            * Restore the stack pointer from r11. It was saved on exception
>>            * entry (see __DEFINE_TRAP_ENTRY).
>>            */
>>           mov sp, r11
>> -ENTRY(return_to_new_vcpu32)
>> +LABEL(return_to_new_vcpu32)
> 
> I am a bit confused why this is a LABEL rather than a FUNC. But I wonder 
> if either of them are corrrect? The code above is meant to fall into 
> this one.

My take is that function (or object) ranges shouldn't overlap. That's an
abstract reason. There's a practical reason, too: With "common: honor
CONFIG_CC_SPLIT_SECTIONS also for assembly functions" FUNC() will change
sections when CC_SPLIT_SECTIONS=y (which LABEL() won't). Section changes
clearly may not happen when fall-through is intended.

> So I think at least the alignment should be 0.

That would be a change compared to the prior use of ENTRY(). I can certainly
do so, but without having sufficient context my goal was to leave existing
alignment unaltered as far as possible (on the assumption that there's a
reason for it).

Jan

Re: [PATCH v7 10/11] Arm32: use new-style entry annotations in head.S

[Jan Beulich]

On 25.11.2024 21:28, Julien Grall wrote:
> On 01/10/2024 16:17, Jan Beulich wrote:
>> Locally override SYM_PUSH_SECTION() to retain the intended section
>> association.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> ---
>> v7: New.
>>
>> --- a/xen/arch/arm/arm32/head.S
>> +++ b/xen/arch/arm/arm32/head.S
>> @@ -48,13 +48,20 @@
>>   
>>           .section .text.header, "ax", %progbits
>>           .arm
>> +/*
>> + * Code below wants to all live in the section established above.  Annotations
>> + * from xen/linkage.h therefore may not switch sections (honoring
>> + * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
>> + */
>> +#undef SYM_PUSH_SECTION
>> +#define SYM_PUSH_SECTION(name, attr)
> 
> Are you suggesting the code in arch/*/head.S has a latent bug?

I don't think I'd call this a "bug". Code which is sensitive to what precise
section it lives in better is left unaffected by the per-function sections
that CC_SPLIT_SECTIONS=y asks for. Which precise way this is arranged for is
a separate question. You'll find a few more instances of this approach
throughout the series.

Jan

Re: [PATCH v7 07/11] Arm32: use new-style entry annotations for library code

[Julien Grall]

Hi,

On 26/11/2024 08:41, Jan Beulich wrote:
> On 25.11.2024 21:15, Julien Grall wrote:
>> Hi Jan,
>>
>> Sorry for the late answer.
>>
>> On 01/10/2024 16:16, Jan Beulich wrote:
>>> No functional change, albeit all globals now become hidden, and aliasing
>>> symbols (__aeabi_{u,}idiv) as well as __memzero lose their function-ness
>>> and size.
>>>
>>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>>> ---
>>> If the function-ness is important, some new construct would need
>>> inventing. Not setting size for the aliases may even be desirable, as
>>> I'm uncertain whether it is really legal in ELF that two entities
>>> overlap in space.
>>
>> I can't think of a reason where we would need the "function-ness".
> 
> Good, thanks for confirming.
> 
>>> I fear I'm breaking __memzero(), as I don't understand the purpose of
>>> the ".word 0" next to where the FUNC_LOCAL() appears.
>>
>> I am not entirely sure either. AFAIK, "0" is not a valid instruction.
>>
>> This code was taken from Linux, the history doesn't give much clue
>> because it seems the ".word 0" was added before Linux used git.
> 
> My vague guess is that this is a crude way of arranging for desired
> alignment of labels later in the function. That wouldn't require use
> of .word (could simply be a nop), yet what specifically is used there
> doesn't matter for the patch here.
> 
>> However, it looks like Linux replace __memzero with memset() 6 years ago
>> on arm32. So maybe we should get rid of it? This would at least avoid
>> worrying on the purpose of ".word 0".
> 
> Certainly an option, yet may I remind you of your replies [1], [2] to
> a much older patch of mine, which I still have pending for the
> suggested removal never having happened? I fear the patch here may get
> stuck over this just like the other one did.

Here we go 
https://lore.kernel.org/xen-devel/20241127105512.88703-1-julien@xen.org/

Cheers,

-- 
Julien Grall

[PATCH v8 0/6] (mostly) Arm32: add/convert entry point annotations

[Jan Beulich]

Besides the (now) last patch only Arm32 adjustments are left in this
series.

1: Arm32: use new-style entry annotations for library code
2: Arm32: use new-style entry annotations for MMU code
3: Arm32: use new-style entry annotations for entry code
4: Arm32: use new-style entry annotations in head.S
5: Arm: purge ENTRY(), ENDPROC(), and ALIGN
6: common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

Jan

[PATCH v8 1/6] Arm32: use new-style entry annotations for library code

[Jan Beulich]

No functional change, albeit all globals now become hidden, and aliasing
symbols (__aeabi_{u,}idiv) lose their function-ness and size.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
If the function-ness was important (Julien says it likely isn't), some
new construct would need inventing. Not setting size for the aliases may
even be desirable, as I'm uncertain whether it is really legal in ELF
that two entities overlap in space.
---
v8: Re-base.
v7: New.

--- a/xen/arch/arm/arm32/lib/findbit.S
+++ b/xen/arch/arm/arm32/lib/findbit.S
@@ -20,7 +20,7 @@
  * Purpose  : Find a 'zero' bit
  * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
  */
-ENTRY(_find_first_zero_bit_le)
+FUNC(_find_first_zero_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
@@ -35,13 +35,13 @@ ENTRY(_find_first_zero_bit_le)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_zero_bit_le)
+END(_find_first_zero_bit_le)
 
 /*
  * Purpose  : Find next 'zero' bit
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(_find_next_zero_bit_le)
+FUNC(_find_next_zero_bit_le)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -55,13 +55,13 @@ ENTRY(_find_next_zero_bit_le)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_le)
+END(_find_next_zero_bit_le)
 
 /*
  * Purpose  : Find a 'one' bit
  * Prototype: int find_first_bit(const unsigned long *addr, unsigned int maxbit);
  */
-ENTRY(_find_first_bit_le)
+FUNC(_find_first_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
@@ -76,13 +76,13 @@ ENTRY(_find_first_bit_le)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_bit_le)
+END(_find_first_bit_le)
 
 /*
  * Purpose  : Find next 'one' bit
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(_find_next_bit_le)
+FUNC(_find_next_bit_le)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -95,11 +95,11 @@ ENTRY(_find_next_bit_le)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_le)
+END(_find_next_bit_le)
 
 #ifdef __ARMEB__
 
-ENTRY(_find_first_zero_bit_be)
+FUNC(_find_first_zero_bit_be)
 		teq	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -114,9 +114,9 @@ ENTRY(_find_first_zero_bit_be)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_zero_bit_be)
+END(_find_first_zero_bit_be)
 
-ENTRY(_find_next_zero_bit_be)
+FUNC(_find_next_zero_bit_be)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -131,9 +131,9 @@ ENTRY(_find_next_zero_bit_be)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_be)
+END(_find_next_zero_bit_be)
 
-ENTRY(_find_first_bit_be)
+FUNC(_find_first_bit_be)
 		teq	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -148,9 +148,9 @@ ENTRY(_find_first_bit_be)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_bit_be)
+END(_find_first_bit_be)
 
-ENTRY(_find_next_bit_be)
+FUNC(_find_next_bit_be)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -164,7 +164,7 @@ ENTRY(_find_next_bit_be)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_be)
+END(_find_next_bit_be)
 
 #endif
 
--- a/xen/arch/arm/arm32/lib/lib1funcs.S
+++ b/xen/arch/arm/arm32/lib/lib1funcs.S
@@ -201,8 +201,8 @@ along with this program; see the file CO
 .endm
 
 
-ENTRY(__udivsi3)
-ENTRY(__aeabi_uidiv)
+FUNC(__udivsi3)
+LABEL(__aeabi_uidiv)
 UNWIND(.fnstart)
 
 	subs	r2, r1, #1
@@ -228,10 +228,9 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__udivsi3)
-ENDPROC(__aeabi_uidiv)
+END(__udivsi3)
 
-ENTRY(__umodsi3)
+FUNC(__umodsi3)
 UNWIND(.fnstart)
 
 	subs	r2, r1, #1			@ compare divisor with 1
@@ -247,10 +246,10 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__umodsi3)
+END(__umodsi3)
 
-ENTRY(__divsi3)
-ENTRY(__aeabi_idiv)
+FUNC(__divsi3)
+LABEL(__aeabi_idiv)
 UNWIND(.fnstart)
 
 	cmp	r1, #0
@@ -289,10 +288,9 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__divsi3)
-ENDPROC(__aeabi_idiv)
+END(__divsi3)
 
-ENTRY(__modsi3)
+FUNC(__modsi3)
 UNWIND(.fnstart)
 
 	cmp	r1, #0
@@ -314,11 +312,11 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__modsi3)
+END(__modsi3)
 
 #ifdef CONFIG_AEABI
 
-ENTRY(__aeabi_uidivmod)
+FUNC(__aeabi_uidivmod)
 UNWIND(.fnstart)
 UNWIND(.save {r0, r1, ip, lr}	)
 
@@ -330,9 +328,9 @@ UNWIND(.save {r0, r1, ip, lr}	)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__aeabi_uidivmod)
+END(__aeabi_uidivmod)
 
-ENTRY(__aeabi_idivmod)
+FUNC(__aeabi_idivmod)
 UNWIND(.fnstart)
 UNWIND(.save {r0, r1, ip, lr}	)
 	stmfd	sp!, {r0, r1, ip, lr}
@@ -343,9 +341,9 @@ UNWIND(.save {r0, r1, ip, lr}	)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__aeabi_idivmod)
+END(__aeabi_idivmod)
 
-ENTRY(__aeabi_uldivmod)
+FUNC(__aeabi_uldivmod)
 UNWIND(.fnstart)
 UNWIND(.save {lr}	)
 	sub sp, sp, #8
@@ -357,9 +355,9 @@ UNWIND(.save {lr}	)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__aeabi_uldivmod)
+END(__aeabi_uldivmod)
 
-ENTRY(__aeabi_ldivmod)
+FUNC(__aeabi_ldivmod)
 UNWIND(.fnstart)
 UNWIND(.save {lr}	)
 	sub sp, sp, #16
@@ -371,10 +369,10 @@ UNWIND(.save {lr}	)
 	mov	pc, lr
 	
 UNWIND(.fnend)
-ENDPROC(__aeabi_ldivmod)
+END(__aeabi_ldivmod)
 #endif
 
-Ldiv0:
+FUNC_LOCAL(Ldiv0)
 UNWIND(.fnstart)
 UNWIND(.pad #4)
 UNWIND(.save {lr})
@@ -383,4 +381,4 @@ UNWIND(.save {lr})
 	mov	r0, #0			@ About as wrong as it could be.
 	ldr	pc, [sp], #8
 UNWIND(.fnend)
-ENDPROC(Ldiv0)
+END(Ldiv0)
--- a/xen/arch/arm/arm32/lib/lshrdi3.S
+++ b/xen/arch/arm/arm32/lib/lshrdi3.S
@@ -34,8 +34,8 @@ along with this program; see the file CO
 #define ah r1
 #endif
 
-ENTRY(__lshrdi3)
-ENTRY(__aeabi_llsr)
+FUNC(__lshrdi3)
+LABEL(__aeabi_llsr)
 
 	subs	r3, r2, #32
 	rsb	ip, r2, #32
@@ -47,5 +47,4 @@ ENTRY(__aeabi_llsr)
 	mov	ah, ah, lsr r2
 	mov	pc, lr
 
-ENDPROC(__lshrdi3)
-ENDPROC(__aeabi_llsr)
+END(__lshrdi3)
--- a/xen/arch/arm/arm32/lib/memchr.S
+++ b/xen/arch/arm/arm32/lib/memchr.S
@@ -12,8 +12,7 @@
 #include "assembler.h"
 
 	.text
-	.align	5
-ENTRY(memchr)
+FUNC(memchr, 32)
 	and	r1, r1, #0xff
 1:	subs	r2, r2, #1
 	bmi	2f
@@ -23,4 +22,4 @@ ENTRY(memchr)
 	sub	r0, r0, #1
 2:	movne	r0, #0
 	mov	pc, lr
-ENDPROC(memchr)
+END(memchr)
--- a/xen/arch/arm/arm32/lib/memcpy.S
+++ b/xen/arch/arm/arm32/lib/memcpy.S
@@ -54,8 +54,8 @@
 
 /* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
 
-ENTRY(memcpy)
+FUNC(memcpy)
 
 #include "copy_template.S"
 
-ENDPROC(memcpy)
+END(memcpy)
--- a/xen/arch/arm/arm32/lib/memmove.S
+++ b/xen/arch/arm/arm32/lib/memmove.S
@@ -24,7 +24,7 @@
  * occurring in the opposite direction.
  */
 
-ENTRY(memmove)
+FUNC(memmove)
 
 		subs	ip, r0, r1
 		cmphi	r2, ip
@@ -194,4 +194,4 @@ ENTRY(memmove)
 
 18:		backward_copy_shift	push=24	pull=8
 
-ENDPROC(memmove)
+END(memmove)
--- a/xen/arch/arm/arm32/lib/memset.S
+++ b/xen/arch/arm/arm32/lib/memset.S
@@ -12,9 +12,8 @@
 #include "assembler.h"
 
 	.text
-	.align	5
 
-ENTRY(memset)
+FUNC(memset, 32)
 	and	r1, r1, #0xff
 	ands	r3, r0, #3		@ 1 unaligned?
 	mov	ip, r0			@ preserve r0 as return value
@@ -120,4 +119,4 @@ ENTRY(memset)
 	strb	r1, [ip], #1		@ 1
 	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
 	b	1b
-ENDPROC(memset)
+END(memset)
--- a/xen/arch/arm/arm32/lib/strchr.S
+++ b/xen/arch/arm/arm32/lib/strchr.S
@@ -14,8 +14,7 @@
 #include "assembler.h"
 
 		.text
-		.align	5
-ENTRY(strchr)
+FUNC(strchr, 32)
 		and	r1, r1, #0xff
 1:		ldrb	r2, [r0], #1
 		teq	r2, r1
@@ -25,4 +24,4 @@ ENTRY(strchr)
 		movne	r0, #0
 		subeq	r0, r0, #1
 		mov	pc, lr
-ENDPROC(strchr)
+END(strchr)
--- a/xen/arch/arm/arm32/lib/strrchr.S
+++ b/xen/arch/arm/arm32/lib/strrchr.S
@@ -12,8 +12,7 @@
 #include "assembler.h"
 
 		.text
-		.align	5
-ENTRY(strrchr)
+FUNC(strrchr, 32)
 		and	r1, r1, #0xff
 		mov	r3, #0
 1:		ldrb	r2, [r0], #1
@@ -23,4 +22,4 @@ ENTRY(strrchr)
 		bne	1b
 		mov	r0, r3
 		mov	pc, lr
-ENDPROC(strrchr)
+END(strrchr)

[PATCH v8 2/6] Arm32: use new-style entry annotations for MMU code

[Jan Beulich]

Locally override SYM_PUSH_SECTION() to retain the intended section
association.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v7: New.

--- a/xen/arch/arm/arm32/mmu/head.S
+++ b/xen/arch/arm/arm32/mmu/head.S
@@ -160,6 +160,13 @@
 .endm
 
 .section .text.idmap, "ax", %progbits
+/*
+ * Code below wants to all live in the section established above.  Annotations
+ * from xen/linkage.h therefore may not switch sections (honoring
+ * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
+ */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
 
 /*
  * Rebuild the boot pagetable's first-level entries. The structure
@@ -174,7 +181,7 @@
  *
  * Clobbers r0 - r5
  */
-create_page_tables:
+FUNC_LOCAL(create_page_tables)
         /* Prepare the page-tables for mapping Xen */
         mov_w r0, XEN_VIRT_START
 
@@ -263,7 +270,7 @@ use_temporary_mapping:
 
         mov   r12, #1                /* r12 := temporary mapping created */
         mov   pc, lr
-ENDPROC(create_page_tables)
+END(create_page_tables)
 
 /*
  * Turn on the Data Cache and the MMU. The function will return
@@ -276,7 +283,7 @@ ENDPROC(create_page_tables)
  *
  * Clobbers r0 - r5
  */
-enable_mmu:
+FUNC_LOCAL(enable_mmu)
         PRINT("- Turning on paging -\r\n")
 
         /*
@@ -346,7 +353,7 @@ enable_mmu:
         teq   r12, #0
         beq   remove_identity_mapping
         b     remove_temporary_mapping
-ENDPROC(enable_mmu)
+END(enable_mmu)
 
 /*
  * Switch to the runtime mapping. The logic depends on whether the
@@ -366,7 +373,7 @@ ENDPROC(enable_mmu)
  *
  * Clobbers r0 - r4
  */
-switch_to_runtime_mapping:
+FUNC_LOCAL(switch_to_runtime_mapping)
         /*
          * Jump to the runtime mapping if the virt and phys are not
          * clashing
@@ -411,7 +418,7 @@ ready_to_switch:
         PRINT_ID("- Jumping to runtime address -\r\n")
 
         mov   pc, lr
-ENDPROC(switch_to_runtime_mapping)
+END(switch_to_runtime_mapping)
 
 /*
  * Enable mm (turn on the data cache and the MMU) for secondary CPUs.
@@ -428,7 +435,7 @@ ENDPROC(switch_to_runtime_mapping)
  *
  * Clobbers r0 - r6
  */
-ENTRY(enable_secondary_cpu_mm)
+FUNC(enable_secondary_cpu_mm)
         mov   r6, lr
 
         bl    create_page_tables
@@ -456,7 +463,7 @@ ENTRY(enable_secondary_cpu_mm)
 
         /* Return to the virtual address requested by the caller. */
         mov   pc, r6
-ENDPROC(enable_secondary_cpu_mm)
+END(enable_secondary_cpu_mm)
 
 /*
  * Enable mm (turn on the data cache and the MMU) for the boot CPU.
@@ -474,7 +481,7 @@ ENDPROC(enable_secondary_cpu_mm)
  *
  * Clobbers r0 - r6
  */
-ENTRY(enable_boot_cpu_mm)
+FUNC(enable_boot_cpu_mm)
         mov   r6, lr
 
 #ifdef CONFIG_EARLY_PRINTK
@@ -491,7 +498,7 @@ ENTRY(enable_boot_cpu_mm)
         /* Address in the runtime mapping to jump to after the MMU is enabled */
         mov   lr, r6
         b     enable_mmu
-ENDPROC(enable_boot_cpu_mm)
+END(enable_boot_cpu_mm)
 
 /*
  * Remove the 1:1 map from the page-tables. It is not easy to keep track
@@ -503,7 +510,7 @@ ENDPROC(enable_boot_cpu_mm)
  *
  * Clobbers r0 - r3
  */
-remove_identity_mapping:
+FUNC_LOCAL(remove_identity_mapping)
         PRINT("- Removing the identity mapping -\r\n")
 
         /* r2:r3 := invalid page-table entry */
@@ -518,14 +525,14 @@ remove_identity_mapping:
 
         flush_xen_tlb_local r0
         mov   pc, lr
-ENDPROC(remove_identity_mapping)
+END(remove_identity_mapping)
 
 /*
  * Remove the temporary mapping of Xen starting at TEMPORARY_XEN_VIRT_START.
  *
  * Clobbers r0 - r3
  */
-remove_temporary_mapping:
+FUNC_LOCAL(remove_temporary_mapping)
         PRINT("- Removing the temporary mapping -\r\n")
 
         /* r2:r3 := invalid page-table entry */
@@ -541,13 +548,14 @@ remove_temporary_mapping:
         flush_xen_tlb_local r0
 
         mov  pc, lr
-ENDPROC(remove_temporary_mapping)
+END(remove_temporary_mapping)
 
 /* Fail-stop */
-fail:   PRINT("- Boot failed -\r\n")
+FUNC_LOCAL(fail)
+        PRINT("- Boot failed -\r\n")
 1:      wfe
         b     1b
-ENDPROC(fail)
+END(fail)
 
 /*
  * Switch TTBR
@@ -555,7 +563,7 @@ ENDPROC(fail)
  *
  * TODO: This code does not comply with break-before-make.
  */
-ENTRY(switch_ttbr)
+FUNC(switch_ttbr)
         dsb                            /* Ensure the flushes happen before
                                         * continuing */
         isb                            /* Ensure synchronization with previous
@@ -579,4 +587,4 @@ ENTRY(switch_ttbr)
         isb
 
         mov pc, lr
-ENDPROC(switch_ttbr)
+END(switch_ttbr)

[PATCH v8 3/6] Arm32: use new-style entry annotations for entry code

[Jan Beulich]

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
Should the GLOBAL()s also be replaced?
---
v7: New.

--- a/xen/arch/arm/arm32/entry.S
+++ b/xen/arch/arm/arm32/entry.S
@@ -31,7 +31,7 @@
  *  r4: Set to a non-zero value if a pending Abort exception took place.
  *      Otherwise, it will be set to zero.
  */
-prepare_context_from_guest:
+FUNC_LOCAL(prepare_context_from_guest)
 #ifdef CONFIG_ARM32_HARDEN_BRANCH_PREDICTOR
         /*
          * Restore vectors table to the default as it may have been
@@ -140,7 +140,7 @@ abort_guest_exit_end:
 
 skip_check:
         b   enter_hypervisor_from_guest_preirq
-ENDPROC(prepare_context_from_guest)
+END(prepare_context_from_guest)
 
         /*
          * Macro to define a trap entry.
@@ -362,13 +362,13 @@ trap_irq:
 trap_fiq:
         vector fiq
 
-return_from_trap:
+LABEL_LOCAL(return_from_trap)
         /*
          * Restore the stack pointer from r11. It was saved on exception
          * entry (see __DEFINE_TRAP_ENTRY).
          */
         mov sp, r11
-ENTRY(return_to_new_vcpu32)
+LABEL(return_to_new_vcpu32)
         ldr r11, [sp, #UREGS_cpsr]
         and r11, #PSR_MODE_MASK
         cmp r11, #PSR_MODE_HYP
@@ -426,6 +426,7 @@ return_to_hypervisor:
         clrex
         eret
         sb
+END(return_from_trap)
 
 /*
  * struct vcpu *__context_switch(struct vcpu *prev, struct vcpu *next)
@@ -435,12 +436,13 @@ return_to_hypervisor:
  *
  * Returns prev in r0
  */
-ENTRY(__context_switch)
+FUNC(__context_switch)
         add     ip, r0, #VCPU_arch_saved_context
         stmia   ip!, {r4 - sl, fp, sp, lr}      /* Save register state */
 
         add     r4, r1, #VCPU_arch_saved_context
         ldmia   r4, {r4 - sl, fp, sp, pc}       /* Load registers and return */
+END(__context_switch)
 
 /*
  * Local variables:

[PATCH v8 4/6] Arm32: use new-style entry annotations in head.S

[Jan Beulich]

Locally override SYM_PUSH_SECTION() to retain the intended section
association.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
v8: Re-base.
v7: New.

--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -48,13 +48,20 @@
 
         .section .text.header, "ax", %progbits
         .arm
+/*
+ * Code below wants to all live in the section established above.  Annotations
+ * from xen/linkage.h therefore may not switch sections (honoring
+ * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
+ */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
 
         /*
          * This must be the very first address in the loaded image.
          * It should be linked at XEN_VIRT_START, and loaded at any
          * 4K-aligned address.
          */
-GLOBAL(start)
+FUNC(start)
         /*
          * zImage magic header, see:
          * http://www.simtec.co.uk/products/SWLINUX/files/booting_article.html#d0e309
@@ -104,9 +111,9 @@ primary_switched:
         mov   r0, r8                 /* r0 := paddr(FDT) */
         mov_w r1, start_xen
         b     launch
-ENDPROC(start)
+END(start)
 
-GLOBAL(init_secondary)
+FUNC(init_secondary)
         cpsid aif                    /* Disable all interrupts */
 
         /* Find out where we are */
@@ -142,7 +149,7 @@ secondary_switched:
         /* Jump to C world */
         mov_w r1, start_secondary
         b     launch
-ENDPROC(init_secondary)
+END(init_secondary)
 
 /*
  * Check if the CPU supports virtualization extensions and has been booted
@@ -154,7 +161,7 @@ ENDPROC(init_secondary)
  *
  * Clobbers r0 - r3
  */
-check_cpu_mode:
+FUNC_LOCAL(check_cpu_mode)
         /* Check that this CPU has Hyp mode */
         mrc   CP32(r0, ID_PFR1)
         and   r0, r0, #0xf000        /* Bits 12-15 define virt extensions */
@@ -174,14 +181,14 @@ check_cpu_mode:
         PRINT("- Xen must be entered in NS Hyp mode -\r\n")
         PRINT("- Please update the bootloader -\r\n")
         b     fail
-ENDPROC(check_cpu_mode)
+END(check_cpu_mode)
 
 /*
  * Zero BSS
  *
  * Clobbers r0 - r3
  */
-zero_bss:
+FUNC_LOCAL(zero_bss)
         PRINT("- Zero BSS -\r\n")
         mov_w r0, __bss_start        /* r0 := vaddr(__bss_start) */
         mov_w r1, __bss_end          /* r1 := vaddr(__bss_end)   */
@@ -195,9 +202,9 @@ zero_bss:
 
 skip_bss:
         mov   pc, lr
-ENDPROC(zero_bss)
+END(zero_bss)
 
-cpu_init:
+FUNC_LOCAL(cpu_init)
         PRINT("- Setting up control registers -\r\n")
 
         mov   r5, lr                       /* r5 := return address */
@@ -238,7 +245,7 @@ cpu_init_done:
         isb
 
         mov   pc, r5                        /* Return address is in r5 */
-ENDPROC(cpu_init)
+END(cpu_init)
 
 /*
  * Setup the initial stack and jump to the C world
@@ -249,7 +256,7 @@ ENDPROC(cpu_init)
  *
  * Clobbers r3
  */
-launch:
+FUNC_LOCAL(launch)
         mov_w r3, init_data
         add   r3, #INITINFO_stack    /* Find the boot-time stack */
         ldr   sp, [r3]
@@ -258,13 +265,14 @@ launch:
 
         /* Jump to C world */
        bx    r1
-ENDPROC(launch)
+END(launch)
 
 /* Fail-stop */
-fail:   PRINT("- Boot failed -\r\n")
+FUNC_LOCAL(fail)
+        PRINT("- Boot failed -\r\n")
 1:      wfe
         b     1b
-ENDPROC(fail)
+END(fail)
 
 #ifdef CONFIG_EARLY_PRINTK
 /*
@@ -275,14 +283,14 @@ ENDPROC(fail)
  *
  * Clobbers r0 - r3
  */
-init_uart:
+FUNC_LOCAL(init_uart)
         mov_w r11, CONFIG_EARLY_UART_BASE_ADDRESS
 #ifdef CONFIG_EARLY_UART_INIT
         early_uart_init r11, r1, r2
 #endif
         PRINT("- UART enabled -\r\n")
         mov   pc, lr
-ENDPROC(init_uart)
+END(init_uart)
 
 /*
  * Print early debug messages.
@@ -291,14 +299,14 @@ ENDPROC(init_uart)
  * r11: Early UART base address
  * Clobbers r0-r1
  */
-ENTRY(asm_puts)
+FUNC(asm_puts)
         early_uart_ready r11, r1
         ldrb  r1, [r0], #1           /* Load next char */
         teq   r1, #0                 /* Exit on nul */
         moveq pc, lr
         early_uart_transmit r11, r1
         b asm_puts
-ENDPROC(asm_puts)
+END(asm_puts)
 
 /*
  * Print a 32-bit number in hex.
@@ -307,7 +315,7 @@ ENDPROC(asm_puts)
  * r11: Early UART base address
  * Clobbers r0-r3
  */
-ENTRY(asm_putn)
+FUNC(asm_putn)
         adr_l r1, hex
         mov   r3, #8
 1:
@@ -319,18 +327,19 @@ ENTRY(asm_putn)
         subs  r3, r3, #1
         bne   1b
         mov   pc, lr
-ENDPROC(asm_putn)
+END(asm_putn)
 
 RODATA_SECT(.rodata.idmap, hex, "0123456789abcdef")
 
 #endif /* CONFIG_EARLY_PRINTK */
 
 /* This provides a C-API version of __lookup_processor_type */
-ENTRY(lookup_processor_type)
+FUNC(lookup_processor_type)
         stmfd sp!, {r4, lr}
         bl    __lookup_processor_type
         mov r0, r1
         ldmfd sp!, {r4, pc}
+END(lookup_processor_type)
 
 /*
  * Read processor ID register (CP#15, CR0), and Look up in the linker-built
@@ -341,7 +350,7 @@ ENTRY(lookup_processor_type)
  * r1: proc_info pointer
  * Clobbers r2-r4
  */
-__lookup_processor_type:
+FUNC_LOCAL(__lookup_processor_type)
         mrc   CP32(r0, MIDR)                /* r0 := our cpu id */
         adr_l r1, __proc_info_start
         adr_l r2, __proc_info_end
@@ -357,7 +366,7 @@ __lookup_processor_type:
         mov   r1, #0
 2:
         mov   pc, lr
-ENDPROC(__lookup_processor_type)
+END(__lookup_processor_type)
 
 /*
  * Local variables:

[PATCH v8 5/6] Arm: purge ENTRY(), ENDPROC(), and ALIGN

[Jan Beulich]

They're no longer used. This also makes it unnecessary to #undef two of
them in the linker script.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
---
v7: New.

--- a/xen/arch/arm/include/asm/config.h
+++ b/xen/arch/arm/include/asm/config.h
@@ -53,17 +53,9 @@
 
 /* Linkage for ARM */
 #ifdef __ASSEMBLY__
-#define ALIGN .balign CONFIG_FUNCTION_ALIGNMENT
-#define ENTRY(name)                             \
-  .globl name;                                  \
-  ALIGN;                                        \
-  name:
 #define GLOBAL(name)                            \
   .globl name;                                  \
   name:
-#define ENDPROC(name) \
-  .type name, %function; \
-  END(name)
 #endif
 
 #include <xen/const.h>
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -6,8 +6,6 @@
 #include <xen/lib.h>
 #include <xen/xen.lds.h>
 #include <asm/page.h>
-#undef ENTRY
-#undef ALIGN
 
 ENTRY(start)
 

[PATCH v8 6/6] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Jan Beulich]

Leverage the new infrastructure in xen/linkage.h to also switch to per-
function sections (when configured), deriving the specific name from the
"base" section in use at the time FUNC() is invoked.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
TBD: Since we use .subsection in UNLIKELY_START(), a perhaps not really
     wanted side effect of this change is that respective out-of-line
     code now moves much closer to its original (invoking) code.

TBD: Of course something with the same overall effect, but less
     impactful might do in Config.mk. E.g. $(filter-out -D%,$(3))
     instead of $(firstword (3)). In fact Roger wants the detection to
     be in Kconfig, for LIVEPATCH to depend on it. Yet the whole
     underlying discussion there imo would first need settling (and
     therefore reviving).

Note that we'd need to split DATA() in order to separate r/w, r/o, and
BSS contributions. Further splitting might be needed to also support
more advanced attributes (e.g. merge), hence why this isn't done right
here. Sadly while a new section's name can be derived from the presently
in use, its attributes cannot be. Perhaps the only thing we can do is
give DATA() a 2nd mandatory parameter. Then again I guess most data
definitions could be moved to C anyway.

An alternative to the "override" in arm64/head.S would be to use
LABEL{,_LOCAL}() instead of FUNC{,_LOCAL}() there. Yet that would also
lose the type information then. Question is whether the annotated ranges
really are "functions" in whichever wide or narrow sense.
---
v7: Override SYM_PUSH_SECTION() in arch/x86/indirect-thunk.S. Re-base,
    notably to deal with fallout from fba250ae604e ("xen/arm64: head:
    Add missing code symbol annotations").
v6: Deal with x86'es entry_PF() and entry_int82() falling through to the
    next "function". Re-base.
v5: Re-base over changes earlier in the series.
v4: Re-base.
v2: Make detection properly fail on old gas (by adjusting
    cc-option-add-closure).

--- a/Config.mk
+++ b/Config.mk
@@ -102,7 +102,7 @@ cc-option = $(shell if $(1) $(2:-Wno-%=-
 # Usage: $(call cc-option-add CFLAGS,CC,-march=winchip-c6)
 cc-option-add = $(eval $(call cc-option-add-closure,$(1),$(2),$(3)))
 define cc-option-add-closure
-    ifneq ($$(call cc-option,$$($(2)),$(3),n),n)
+    ifneq ($$(call cc-option,$$($(2)),$(firstword $(3)),n),n)
         $(1) += $(3)
     endif
 endef
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -415,6 +415,9 @@ AFLAGS += -D__ASSEMBLY__
 
 $(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--noexecstack)
 
+# Check to see whether the assembler supports the --sectname-subst option.
+$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)
+
 LDFLAGS-$(call ld-option,--warn-rwx-segments) += --no-warn-rwx-segments
 
 CFLAGS += $(CFLAGS-y)
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -28,6 +28,14 @@
 #include <asm/arm64/efibind.h>
 #endif
 
+/*
+ * Code here is, at least in part, ordering sensitive.  Annotations
+ * from xen/linkage.h therefore may not switch sections (honoring
+ * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
+ */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
+
 #define __HEAD_FLAG_PAGE_SIZE   ((PAGE_SHIFT - 10) / 2)
 
 #define __HEAD_FLAG_PHYS_BASE   1
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -140,6 +140,9 @@ SECTIONS
   .init.text : {
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        _einittext = .;
        . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
        *(.altinstr_replacement)
--- a/xen/arch/ppc/xen.lds.S
+++ b/xen/arch/ppc/xen.lds.S
@@ -103,6 +103,9 @@ SECTIONS
     DECL_SECTION(.init.text) {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/riscv/xen.lds.S
+++ b/xen/arch/riscv/xen.lds.S
@@ -98,6 +98,9 @@ SECTIONS
     .init.text : {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/x86/indirect-thunk.S
+++ b/xen/arch/x86/indirect-thunk.S
@@ -11,6 +11,10 @@
 
 #include <asm/asm_defns.h>
 
+/* Section placement is done explicitly here; override the respective macro. */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
+
 .macro IND_THUNK_RETPOLINE reg:req
         call 1f
         int3
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -31,6 +31,9 @@ FUNC(entry_int82)
 
         mov   %rsp, %rdi
         call  do_entry_int82
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   compat_test_all_events
+#endif
 END(entry_int82)
 
 /* %rbx: struct vcpu */
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -771,6 +771,9 @@ END(common_interrupt)
 FUNC(entry_PF)
         ENDBR64
         movb  $X86_EXC_PF, EFRAME_entry_vector(%rsp)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   handle_exception
+#endif
 END(entry_PF)
 /* No special register assumptions. */
 FUNC(handle_exception, 0)
@@ -1084,8 +1087,11 @@ FUNC(entry_NMI)
         ENDBR64
         pushq $0
         movb  $X86_EXC_NMI, EFRAME_entry_vector(%rsp)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   handle_ist_exception
+#endif
 END(entry_NMI)
-
+/* No special register assumptions. */
 FUNC(handle_ist_exception)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -83,6 +83,9 @@ SECTIONS
        . = ALIGN(PAGE_SIZE);
        _stextentry = .;
        *(.text.entry)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.text.entry.*)
+#endif
        . = ALIGN(PAGE_SIZE);
        _etextentry = .;
 
@@ -202,6 +205,9 @@ SECTIONS
 #endif
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        *(.text.startup)
        _einittext = .;
        /*
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -18,6 +18,14 @@
 
 #define SYM_ALIGN(align...) .balign align
 
+#if defined(HAVE_AS_SECTNAME_SUBST) && defined(CONFIG_CC_SPLIT_SECTIONS)
+# define SYM_PUSH_SECTION(name, attr) \
+         .pushsection %S.name, attr, %progbits; \
+         .equ .Lsplit_section, 1
+#else
+# define SYM_PUSH_SECTION(name, attr)
+#endif
+
 #define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
@@ -32,7 +40,14 @@
         SYM_ALIGN(align);                         \
         name:
 
-#define END(name) .size name, . - name
+#define END(name) \
+        .size name, . - name; \
+        .ifdef .Lsplit_section; \
+            .if .Lsplit_section; \
+                .popsection; \
+                .equ .Lsplit_section, 0; \
+            .endif; \
+        .endif
 
 /*
  * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
@@ -47,6 +62,7 @@
 #endif
 
 #define FUNC(name, align...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(align))
 #define LABEL(name, align...) \
         SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(align))
@@ -54,6 +70,7 @@
         SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
 
 #define FUNC_LOCAL(name, align...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(align))
 #define LABEL_LOCAL(name, align...) \
         SYM(name, NONE, LOCAL, DO_CODE_ALIGN(align))

Re: [PATCH v8 0/6] (mostly) Arm32: add/convert entry point annotations

[Luca Fancellu]

Hi,

> On 26 Feb 2025, at 15:58, Jan Beulich <jbeulich@suse.com> wrote:
> 
> Besides the (now) last patch only Arm32 adjustments are left in this
> series.
> 
> 1: Arm32: use new-style entry annotations for library code
> 2: Arm32: use new-style entry annotations for MMU code
> 3: Arm32: use new-style entry annotations for entry code
> 4: Arm32: use new-style entry annotations in head.S
> 5: Arm: purge ENTRY(), ENDPROC(), and ALIGN
> 6: common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

I’ve tested the serie on arm32 and arm64:

Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm


> 
> Jan
> 

[PATCH v8 RESEND 0/6] (mostly) Arm32: add/convert entry point annotations

[Jan Beulich]

(re-sending upon Julien's request)

Besides the (now) last patch only Arm32 adjustments are left in this
series.

1: Arm32: use new-style entry annotations for library code
2: Arm32: use new-style entry annotations for MMU code
3: Arm32: use new-style entry annotations for entry code
4: Arm32: use new-style entry annotations in head.S
5: Arm: purge ENTRY(), ENDPROC(), and ALIGN
6: common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

Jan

[PATCH v8 RESEND 1/6] Arm32: use new-style entry annotations for library code

[Jan Beulich]

No functional change, albeit all globals now become hidden, and aliasing
symbols (__aeabi_{u,}idiv) lose their function-ness and size.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
---
If the function-ness was important (Julien says it likely isn't), some
new construct would need inventing. Not setting size for the aliases may
even be desirable, as I'm uncertain whether it is really legal in ELF
that two entities overlap in space.
---
v8: Re-base.
v7: New.

--- a/xen/arch/arm/arm32/lib/findbit.S
+++ b/xen/arch/arm/arm32/lib/findbit.S
@@ -20,7 +20,7 @@
  * Purpose  : Find a 'zero' bit
  * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
  */
-ENTRY(_find_first_zero_bit_le)
+FUNC(_find_first_zero_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
@@ -35,13 +35,13 @@ ENTRY(_find_first_zero_bit_le)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_zero_bit_le)
+END(_find_first_zero_bit_le)
 
 /*
  * Purpose  : Find next 'zero' bit
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(_find_next_zero_bit_le)
+FUNC(_find_next_zero_bit_le)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -55,13 +55,13 @@ ENTRY(_find_next_zero_bit_le)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_le)
+END(_find_next_zero_bit_le)
 
 /*
  * Purpose  : Find a 'one' bit
  * Prototype: int find_first_bit(const unsigned long *addr, unsigned int maxbit);
  */
-ENTRY(_find_first_bit_le)
+FUNC(_find_first_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
@@ -76,13 +76,13 @@ ENTRY(_find_first_bit_le)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_bit_le)
+END(_find_first_bit_le)
 
 /*
  * Purpose  : Find next 'one' bit
  * Prototype: int find_next_zero_bit(void *addr, unsigned int maxbit, int offset)
  */
-ENTRY(_find_next_bit_le)
+FUNC(_find_next_bit_le)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -95,11 +95,11 @@ ENTRY(_find_next_bit_le)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_le)
+END(_find_next_bit_le)
 
 #ifdef __ARMEB__
 
-ENTRY(_find_first_zero_bit_be)
+FUNC(_find_first_zero_bit_be)
 		teq	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -114,9 +114,9 @@ ENTRY(_find_first_zero_bit_be)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_zero_bit_be)
+END(_find_first_zero_bit_be)
 
-ENTRY(_find_next_zero_bit_be)
+FUNC(_find_next_zero_bit_be)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -131,9 +131,9 @@ ENTRY(_find_next_zero_bit_be)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_zero_bit_be)
+END(_find_next_zero_bit_be)
 
-ENTRY(_find_first_bit_be)
+FUNC(_find_first_bit_be)
 		teq	r1, #0
 		beq	3f
 		mov	r2, #0
@@ -148,9 +148,9 @@ ENTRY(_find_first_bit_be)
 		blo	1b
 3:		mov	r0, r1			@ no free bits
 		mov	pc, lr
-ENDPROC(_find_first_bit_be)
+END(_find_first_bit_be)
 
-ENTRY(_find_next_bit_be)
+FUNC(_find_next_bit_be)
 		cmp	r1, r2
 		bls	3b
 		ands	ip, r2, #7
@@ -164,7 +164,7 @@ ENTRY(_find_next_bit_be)
 		orr	r2, r2, #7		@ if zero, then no bits here
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
-ENDPROC(_find_next_bit_be)
+END(_find_next_bit_be)
 
 #endif
 
--- a/xen/arch/arm/arm32/lib/lib1funcs.S
+++ b/xen/arch/arm/arm32/lib/lib1funcs.S
@@ -201,8 +201,8 @@ along with this program; see the file CO
 .endm
 
 
-ENTRY(__udivsi3)
-ENTRY(__aeabi_uidiv)
+FUNC(__udivsi3)
+LABEL(__aeabi_uidiv)
 UNWIND(.fnstart)
 
 	subs	r2, r1, #1
@@ -228,10 +228,9 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__udivsi3)
-ENDPROC(__aeabi_uidiv)
+END(__udivsi3)
 
-ENTRY(__umodsi3)
+FUNC(__umodsi3)
 UNWIND(.fnstart)
 
 	subs	r2, r1, #1			@ compare divisor with 1
@@ -247,10 +246,10 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__umodsi3)
+END(__umodsi3)
 
-ENTRY(__divsi3)
-ENTRY(__aeabi_idiv)
+FUNC(__divsi3)
+LABEL(__aeabi_idiv)
 UNWIND(.fnstart)
 
 	cmp	r1, #0
@@ -289,10 +288,9 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__divsi3)
-ENDPROC(__aeabi_idiv)
+END(__divsi3)
 
-ENTRY(__modsi3)
+FUNC(__modsi3)
 UNWIND(.fnstart)
 
 	cmp	r1, #0
@@ -314,11 +312,11 @@ UNWIND(.fnstart)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__modsi3)
+END(__modsi3)
 
 #ifdef CONFIG_AEABI
 
-ENTRY(__aeabi_uidivmod)
+FUNC(__aeabi_uidivmod)
 UNWIND(.fnstart)
 UNWIND(.save {r0, r1, ip, lr}	)
 
@@ -330,9 +328,9 @@ UNWIND(.save {r0, r1, ip, lr}	)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__aeabi_uidivmod)
+END(__aeabi_uidivmod)
 
-ENTRY(__aeabi_idivmod)
+FUNC(__aeabi_idivmod)
 UNWIND(.fnstart)
 UNWIND(.save {r0, r1, ip, lr}	)
 	stmfd	sp!, {r0, r1, ip, lr}
@@ -343,9 +341,9 @@ UNWIND(.save {r0, r1, ip, lr}	)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__aeabi_idivmod)
+END(__aeabi_idivmod)
 
-ENTRY(__aeabi_uldivmod)
+FUNC(__aeabi_uldivmod)
 UNWIND(.fnstart)
 UNWIND(.save {lr}	)
 	sub sp, sp, #8
@@ -357,9 +355,9 @@ UNWIND(.save {lr}	)
 	mov	pc, lr
 
 UNWIND(.fnend)
-ENDPROC(__aeabi_uldivmod)
+END(__aeabi_uldivmod)
 
-ENTRY(__aeabi_ldivmod)
+FUNC(__aeabi_ldivmod)
 UNWIND(.fnstart)
 UNWIND(.save {lr}	)
 	sub sp, sp, #16
@@ -371,10 +369,10 @@ UNWIND(.save {lr}	)
 	mov	pc, lr
 	
 UNWIND(.fnend)
-ENDPROC(__aeabi_ldivmod)
+END(__aeabi_ldivmod)
 #endif
 
-Ldiv0:
+FUNC_LOCAL(Ldiv0)
 UNWIND(.fnstart)
 UNWIND(.pad #4)
 UNWIND(.save {lr})
@@ -383,4 +381,4 @@ UNWIND(.save {lr})
 	mov	r0, #0			@ About as wrong as it could be.
 	ldr	pc, [sp], #8
 UNWIND(.fnend)
-ENDPROC(Ldiv0)
+END(Ldiv0)
--- a/xen/arch/arm/arm32/lib/lshrdi3.S
+++ b/xen/arch/arm/arm32/lib/lshrdi3.S
@@ -34,8 +34,8 @@ along with this program; see the file CO
 #define ah r1
 #endif
 
-ENTRY(__lshrdi3)
-ENTRY(__aeabi_llsr)
+FUNC(__lshrdi3)
+LABEL(__aeabi_llsr)
 
 	subs	r3, r2, #32
 	rsb	ip, r2, #32
@@ -47,5 +47,4 @@ ENTRY(__aeabi_llsr)
 	mov	ah, ah, lsr r2
 	mov	pc, lr
 
-ENDPROC(__lshrdi3)
-ENDPROC(__aeabi_llsr)
+END(__lshrdi3)
--- a/xen/arch/arm/arm32/lib/memchr.S
+++ b/xen/arch/arm/arm32/lib/memchr.S
@@ -12,8 +12,7 @@
 #include "assembler.h"
 
 	.text
-	.align	5
-ENTRY(memchr)
+FUNC(memchr, 32)
 	and	r1, r1, #0xff
 1:	subs	r2, r2, #1
 	bmi	2f
@@ -23,4 +22,4 @@ ENTRY(memchr)
 	sub	r0, r0, #1
 2:	movne	r0, #0
 	mov	pc, lr
-ENDPROC(memchr)
+END(memchr)
--- a/xen/arch/arm/arm32/lib/memcpy.S
+++ b/xen/arch/arm/arm32/lib/memcpy.S
@@ -54,8 +54,8 @@
 
 /* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
 
-ENTRY(memcpy)
+FUNC(memcpy)
 
 #include "copy_template.S"
 
-ENDPROC(memcpy)
+END(memcpy)
--- a/xen/arch/arm/arm32/lib/memmove.S
+++ b/xen/arch/arm/arm32/lib/memmove.S
@@ -24,7 +24,7 @@
  * occurring in the opposite direction.
  */
 
-ENTRY(memmove)
+FUNC(memmove)
 
 		subs	ip, r0, r1
 		cmphi	r2, ip
@@ -194,4 +194,4 @@ ENTRY(memmove)
 
 18:		backward_copy_shift	push=24	pull=8
 
-ENDPROC(memmove)
+END(memmove)
--- a/xen/arch/arm/arm32/lib/memset.S
+++ b/xen/arch/arm/arm32/lib/memset.S
@@ -12,9 +12,8 @@
 #include "assembler.h"
 
 	.text
-	.align	5
 
-ENTRY(memset)
+FUNC(memset, 32)
 	and	r1, r1, #0xff
 	ands	r3, r0, #3		@ 1 unaligned?
 	mov	ip, r0			@ preserve r0 as return value
@@ -120,4 +119,4 @@ ENTRY(memset)
 	strb	r1, [ip], #1		@ 1
 	add	r2, r2, r3		@ 1 (r2 = r2 - (4 - r3))
 	b	1b
-ENDPROC(memset)
+END(memset)
--- a/xen/arch/arm/arm32/lib/strchr.S
+++ b/xen/arch/arm/arm32/lib/strchr.S
@@ -14,8 +14,7 @@
 #include "assembler.h"
 
 		.text
-		.align	5
-ENTRY(strchr)
+FUNC(strchr, 32)
 		and	r1, r1, #0xff
 1:		ldrb	r2, [r0], #1
 		teq	r2, r1
@@ -25,4 +24,4 @@ ENTRY(strchr)
 		movne	r0, #0
 		subeq	r0, r0, #1
 		mov	pc, lr
-ENDPROC(strchr)
+END(strchr)
--- a/xen/arch/arm/arm32/lib/strrchr.S
+++ b/xen/arch/arm/arm32/lib/strrchr.S
@@ -12,8 +12,7 @@
 #include "assembler.h"
 
 		.text
-		.align	5
-ENTRY(strrchr)
+FUNC(strrchr, 32)
 		and	r1, r1, #0xff
 		mov	r3, #0
 1:		ldrb	r2, [r0], #1
@@ -23,4 +22,4 @@ ENTRY(strrchr)
 		bne	1b
 		mov	r0, r3
 		mov	pc, lr
-ENDPROC(strrchr)
+END(strrchr)

[PATCH v8 RESEND 2/6] Arm32: use new-style entry annotations for MMU code

[Jan Beulich]

Locally override SYM_PUSH_SECTION() to retain the intended section
association.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
---
v7: New.

--- a/xen/arch/arm/arm32/mmu/head.S
+++ b/xen/arch/arm/arm32/mmu/head.S
@@ -160,6 +160,13 @@
 .endm
 
 .section .text.idmap, "ax", %progbits
+/*
+ * Code below wants to all live in the section established above.  Annotations
+ * from xen/linkage.h therefore may not switch sections (honoring
+ * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
+ */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
 
 /*
  * Rebuild the boot pagetable's first-level entries. The structure
@@ -174,7 +181,7 @@
  *
  * Clobbers r0 - r5
  */
-create_page_tables:
+FUNC_LOCAL(create_page_tables)
         /* Prepare the page-tables for mapping Xen */
         mov_w r0, XEN_VIRT_START
 
@@ -263,7 +270,7 @@ use_temporary_mapping:
 
         mov   r12, #1                /* r12 := temporary mapping created */
         mov   pc, lr
-ENDPROC(create_page_tables)
+END(create_page_tables)
 
 /*
  * Turn on the Data Cache and the MMU. The function will return
@@ -276,7 +283,7 @@ ENDPROC(create_page_tables)
  *
  * Clobbers r0 - r5
  */
-enable_mmu:
+FUNC_LOCAL(enable_mmu)
         PRINT("- Turning on paging -\r\n")
 
         /*
@@ -346,7 +353,7 @@ enable_mmu:
         teq   r12, #0
         beq   remove_identity_mapping
         b     remove_temporary_mapping
-ENDPROC(enable_mmu)
+END(enable_mmu)
 
 /*
  * Switch to the runtime mapping. The logic depends on whether the
@@ -366,7 +373,7 @@ ENDPROC(enable_mmu)
  *
  * Clobbers r0 - r4
  */
-switch_to_runtime_mapping:
+FUNC_LOCAL(switch_to_runtime_mapping)
         /*
          * Jump to the runtime mapping if the virt and phys are not
          * clashing
@@ -411,7 +418,7 @@ ready_to_switch:
         PRINT_ID("- Jumping to runtime address -\r\n")
 
         mov   pc, lr
-ENDPROC(switch_to_runtime_mapping)
+END(switch_to_runtime_mapping)
 
 /*
  * Enable mm (turn on the data cache and the MMU) for secondary CPUs.
@@ -428,7 +435,7 @@ ENDPROC(switch_to_runtime_mapping)
  *
  * Clobbers r0 - r6
  */
-ENTRY(enable_secondary_cpu_mm)
+FUNC(enable_secondary_cpu_mm)
         mov   r6, lr
 
         bl    create_page_tables
@@ -456,7 +463,7 @@ ENTRY(enable_secondary_cpu_mm)
 
         /* Return to the virtual address requested by the caller. */
         mov   pc, r6
-ENDPROC(enable_secondary_cpu_mm)
+END(enable_secondary_cpu_mm)
 
 /*
  * Enable mm (turn on the data cache and the MMU) for the boot CPU.
@@ -474,7 +481,7 @@ ENDPROC(enable_secondary_cpu_mm)
  *
  * Clobbers r0 - r6
  */
-ENTRY(enable_boot_cpu_mm)
+FUNC(enable_boot_cpu_mm)
         mov   r6, lr
 
 #ifdef CONFIG_EARLY_PRINTK
@@ -491,7 +498,7 @@ ENTRY(enable_boot_cpu_mm)
         /* Address in the runtime mapping to jump to after the MMU is enabled */
         mov   lr, r6
         b     enable_mmu
-ENDPROC(enable_boot_cpu_mm)
+END(enable_boot_cpu_mm)
 
 /*
  * Remove the 1:1 map from the page-tables. It is not easy to keep track
@@ -503,7 +510,7 @@ ENDPROC(enable_boot_cpu_mm)
  *
  * Clobbers r0 - r3
  */
-remove_identity_mapping:
+FUNC_LOCAL(remove_identity_mapping)
         PRINT("- Removing the identity mapping -\r\n")
 
         /* r2:r3 := invalid page-table entry */
@@ -518,14 +525,14 @@ remove_identity_mapping:
 
         flush_xen_tlb_local r0
         mov   pc, lr
-ENDPROC(remove_identity_mapping)
+END(remove_identity_mapping)
 
 /*
  * Remove the temporary mapping of Xen starting at TEMPORARY_XEN_VIRT_START.
  *
  * Clobbers r0 - r3
  */
-remove_temporary_mapping:
+FUNC_LOCAL(remove_temporary_mapping)
         PRINT("- Removing the temporary mapping -\r\n")
 
         /* r2:r3 := invalid page-table entry */
@@ -541,13 +548,14 @@ remove_temporary_mapping:
         flush_xen_tlb_local r0
 
         mov  pc, lr
-ENDPROC(remove_temporary_mapping)
+END(remove_temporary_mapping)
 
 /* Fail-stop */
-fail:   PRINT("- Boot failed -\r\n")
+FUNC_LOCAL(fail)
+        PRINT("- Boot failed -\r\n")
 1:      wfe
         b     1b
-ENDPROC(fail)
+END(fail)
 
 /*
  * Switch TTBR
@@ -555,7 +563,7 @@ ENDPROC(fail)
  *
  * TODO: This code does not comply with break-before-make.
  */
-ENTRY(switch_ttbr)
+FUNC(switch_ttbr)
         dsb                            /* Ensure the flushes happen before
                                         * continuing */
         isb                            /* Ensure synchronization with previous
@@ -579,4 +587,4 @@ ENTRY(switch_ttbr)
         isb
 
         mov pc, lr
-ENDPROC(switch_ttbr)
+END(switch_ttbr)

[PATCH v8 RESEND 3/6] Arm32: use new-style entry annotations for entry code

[Jan Beulich]

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
---
Should the GLOBAL()s also be replaced?
---
v7: New.

--- a/xen/arch/arm/arm32/entry.S
+++ b/xen/arch/arm/arm32/entry.S
@@ -31,7 +31,7 @@
  *  r4: Set to a non-zero value if a pending Abort exception took place.
  *      Otherwise, it will be set to zero.
  */
-prepare_context_from_guest:
+FUNC_LOCAL(prepare_context_from_guest)
 #ifdef CONFIG_ARM32_HARDEN_BRANCH_PREDICTOR
         /*
          * Restore vectors table to the default as it may have been
@@ -140,7 +140,7 @@ abort_guest_exit_end:
 
 skip_check:
         b   enter_hypervisor_from_guest_preirq
-ENDPROC(prepare_context_from_guest)
+END(prepare_context_from_guest)
 
         /*
          * Macro to define a trap entry.
@@ -362,13 +362,13 @@ trap_irq:
 trap_fiq:
         vector fiq
 
-return_from_trap:
+LABEL_LOCAL(return_from_trap)
         /*
          * Restore the stack pointer from r11. It was saved on exception
          * entry (see __DEFINE_TRAP_ENTRY).
          */
         mov sp, r11
-ENTRY(return_to_new_vcpu32)
+LABEL(return_to_new_vcpu32)
         ldr r11, [sp, #UREGS_cpsr]
         and r11, #PSR_MODE_MASK
         cmp r11, #PSR_MODE_HYP
@@ -426,6 +426,7 @@ return_to_hypervisor:
         clrex
         eret
         sb
+END(return_from_trap)
 
 /*
  * struct vcpu *__context_switch(struct vcpu *prev, struct vcpu *next)
@@ -435,12 +436,13 @@ return_to_hypervisor:
  *
  * Returns prev in r0
  */
-ENTRY(__context_switch)
+FUNC(__context_switch)
         add     ip, r0, #VCPU_arch_saved_context
         stmia   ip!, {r4 - sl, fp, sp, lr}      /* Save register state */
 
         add     r4, r1, #VCPU_arch_saved_context
         ldmia   r4, {r4 - sl, fp, sp, pc}       /* Load registers and return */
+END(__context_switch)
 
 /*
  * Local variables:

[PATCH v8 RESEND 4/6] Arm32: use new-style entry annotations in head.S

[Jan Beulich]

Locally override SYM_PUSH_SECTION() to retain the intended section
association.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
---
v8: Re-base.
v7: New.

--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -48,13 +48,20 @@
 
         .section .text.header, "ax", %progbits
         .arm
+/*
+ * Code below wants to all live in the section established above.  Annotations
+ * from xen/linkage.h therefore may not switch sections (honoring
+ * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
+ */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
 
         /*
          * This must be the very first address in the loaded image.
          * It should be linked at XEN_VIRT_START, and loaded at any
          * 4K-aligned address.
          */
-GLOBAL(start)
+FUNC(start)
         /*
          * zImage magic header, see:
          * http://www.simtec.co.uk/products/SWLINUX/files/booting_article.html#d0e309
@@ -104,9 +111,9 @@ primary_switched:
         mov   r0, r8                 /* r0 := paddr(FDT) */
         mov_w r1, start_xen
         b     launch
-ENDPROC(start)
+END(start)
 
-GLOBAL(init_secondary)
+FUNC(init_secondary)
         cpsid aif                    /* Disable all interrupts */
 
         /* Find out where we are */
@@ -142,7 +149,7 @@ secondary_switched:
         /* Jump to C world */
         mov_w r1, start_secondary
         b     launch
-ENDPROC(init_secondary)
+END(init_secondary)
 
 /*
  * Check if the CPU supports virtualization extensions and has been booted
@@ -154,7 +161,7 @@ ENDPROC(init_secondary)
  *
  * Clobbers r0 - r3
  */
-check_cpu_mode:
+FUNC_LOCAL(check_cpu_mode)
         /* Check that this CPU has Hyp mode */
         mrc   CP32(r0, ID_PFR1)
         and   r0, r0, #0xf000        /* Bits 12-15 define virt extensions */
@@ -174,14 +181,14 @@ check_cpu_mode:
         PRINT("- Xen must be entered in NS Hyp mode -\r\n")
         PRINT("- Please update the bootloader -\r\n")
         b     fail
-ENDPROC(check_cpu_mode)
+END(check_cpu_mode)
 
 /*
  * Zero BSS
  *
  * Clobbers r0 - r3
  */
-zero_bss:
+FUNC_LOCAL(zero_bss)
         PRINT("- Zero BSS -\r\n")
         mov_w r0, __bss_start        /* r0 := vaddr(__bss_start) */
         mov_w r1, __bss_end          /* r1 := vaddr(__bss_end)   */
@@ -195,9 +202,9 @@ zero_bss:
 
 skip_bss:
         mov   pc, lr
-ENDPROC(zero_bss)
+END(zero_bss)
 
-cpu_init:
+FUNC_LOCAL(cpu_init)
         PRINT("- Setting up control registers -\r\n")
 
         mov   r5, lr                       /* r5 := return address */
@@ -238,7 +245,7 @@ cpu_init_done:
         isb
 
         mov   pc, r5                        /* Return address is in r5 */
-ENDPROC(cpu_init)
+END(cpu_init)
 
 /*
  * Setup the initial stack and jump to the C world
@@ -249,7 +256,7 @@ ENDPROC(cpu_init)
  *
  * Clobbers r3
  */
-launch:
+FUNC_LOCAL(launch)
         mov_w r3, init_data
         add   r3, #INITINFO_stack    /* Find the boot-time stack */
         ldr   sp, [r3]
@@ -258,13 +265,14 @@ launch:
 
         /* Jump to C world */
        bx    r1
-ENDPROC(launch)
+END(launch)
 
 /* Fail-stop */
-fail:   PRINT("- Boot failed -\r\n")
+FUNC_LOCAL(fail)
+        PRINT("- Boot failed -\r\n")
 1:      wfe
         b     1b
-ENDPROC(fail)
+END(fail)
 
 #ifdef CONFIG_EARLY_PRINTK
 /*
@@ -275,14 +283,14 @@ ENDPROC(fail)
  *
  * Clobbers r0 - r3
  */
-init_uart:
+FUNC_LOCAL(init_uart)
         mov_w r11, CONFIG_EARLY_UART_BASE_ADDRESS
 #ifdef CONFIG_EARLY_UART_INIT
         early_uart_init r11, r1, r2
 #endif
         PRINT("- UART enabled -\r\n")
         mov   pc, lr
-ENDPROC(init_uart)
+END(init_uart)
 
 /*
  * Print early debug messages.
@@ -291,14 +299,14 @@ ENDPROC(init_uart)
  * r11: Early UART base address
  * Clobbers r0-r1
  */
-ENTRY(asm_puts)
+FUNC(asm_puts)
         early_uart_ready r11, r1
         ldrb  r1, [r0], #1           /* Load next char */
         teq   r1, #0                 /* Exit on nul */
         moveq pc, lr
         early_uart_transmit r11, r1
         b asm_puts
-ENDPROC(asm_puts)
+END(asm_puts)
 
 /*
  * Print a 32-bit number in hex.
@@ -307,7 +315,7 @@ ENDPROC(asm_puts)
  * r11: Early UART base address
  * Clobbers r0-r3
  */
-ENTRY(asm_putn)
+FUNC(asm_putn)
         adr_l r1, hex
         mov   r3, #8
 1:
@@ -319,18 +327,19 @@ ENTRY(asm_putn)
         subs  r3, r3, #1
         bne   1b
         mov   pc, lr
-ENDPROC(asm_putn)
+END(asm_putn)
 
 RODATA_SECT(.rodata.idmap, hex, "0123456789abcdef")
 
 #endif /* CONFIG_EARLY_PRINTK */
 
 /* This provides a C-API version of __lookup_processor_type */
-ENTRY(lookup_processor_type)
+FUNC(lookup_processor_type)
         stmfd sp!, {r4, lr}
         bl    __lookup_processor_type
         mov r0, r1
         ldmfd sp!, {r4, pc}
+END(lookup_processor_type)
 
 /*
  * Read processor ID register (CP#15, CR0), and Look up in the linker-built
@@ -341,7 +350,7 @@ ENTRY(lookup_processor_type)
  * r1: proc_info pointer
  * Clobbers r2-r4
  */
-__lookup_processor_type:
+FUNC_LOCAL(__lookup_processor_type)
         mrc   CP32(r0, MIDR)                /* r0 := our cpu id */
         adr_l r1, __proc_info_start
         adr_l r2, __proc_info_end
@@ -357,7 +366,7 @@ __lookup_processor_type:
         mov   r1, #0
 2:
         mov   pc, lr
-ENDPROC(__lookup_processor_type)
+END(__lookup_processor_type)
 
 /*
  * Local variables:

[PATCH v8 RESEND 5/6] Arm: purge ENTRY(), ENDPROC(), and ALIGN

[Jan Beulich]

They're no longer used. This also makes it unnecessary to #undef two of
them in the linker script.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
---
v7: New.

--- a/xen/arch/arm/include/asm/config.h
+++ b/xen/arch/arm/include/asm/config.h
@@ -53,17 +53,9 @@
 
 /* Linkage for ARM */
 #ifdef __ASSEMBLY__
-#define ALIGN .balign CONFIG_FUNCTION_ALIGNMENT
-#define ENTRY(name)                             \
-  .globl name;                                  \
-  ALIGN;                                        \
-  name:
 #define GLOBAL(name)                            \
   .globl name;                                  \
   name:
-#define ENDPROC(name) \
-  .type name, %function; \
-  END(name)
 #endif
 
 #include <xen/const.h>
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -6,8 +6,6 @@
 #include <xen/lib.h>
 #include <xen/xen.lds.h>
 #include <asm/page.h>
-#undef ENTRY
-#undef ALIGN
 
 ENTRY(start)
 

[PATCH v8 RESEND 6/6] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Jan Beulich]

Leverage the new infrastructure in xen/linkage.h to also switch to per-
function sections (when configured), deriving the specific name from the
"base" section in use at the time FUNC() is invoked.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
---
TBD: Since we use .subsection in UNLIKELY_START(), a perhaps not really
     wanted side effect of this change is that respective out-of-line
     code now moves much closer to its original (invoking) code.

TBD: Of course something with the same overall effect, but less
     impactful might do in Config.mk. E.g. $(filter-out -D%,$(3))
     instead of $(firstword (3)). In fact Roger wants the detection to
     be in Kconfig, for LIVEPATCH to depend on it. Yet the whole
     underlying discussion there imo would first need settling (and
     therefore reviving).

Note that we'd need to split DATA() in order to separate r/w, r/o, and
BSS contributions. Further splitting might be needed to also support
more advanced attributes (e.g. merge), hence why this isn't done right
here. Sadly while a new section's name can be derived from the presently
in use, its attributes cannot be. Perhaps the only thing we can do is
give DATA() a 2nd mandatory parameter. Then again I guess most data
definitions could be moved to C anyway.

An alternative to the "override" in arm64/head.S would be to use
LABEL{,_LOCAL}() instead of FUNC{,_LOCAL}() there. Yet that would also
lose the type information then. Question is whether the annotated ranges
really are "functions" in whichever wide or narrow sense.
---
v7: Override SYM_PUSH_SECTION() in arch/x86/indirect-thunk.S. Re-base,
    notably to deal with fallout from fba250ae604e ("xen/arm64: head:
    Add missing code symbol annotations").
v6: Deal with x86'es entry_PF() and entry_int82() falling through to the
    next "function". Re-base.
v5: Re-base over changes earlier in the series.
v4: Re-base.
v2: Make detection properly fail on old gas (by adjusting
    cc-option-add-closure).

--- a/Config.mk
+++ b/Config.mk
@@ -102,7 +102,7 @@ cc-option = $(shell if $(1) $(2:-Wno-%=-
 # Usage: $(call cc-option-add CFLAGS,CC,-march=winchip-c6)
 cc-option-add = $(eval $(call cc-option-add-closure,$(1),$(2),$(3)))
 define cc-option-add-closure
-    ifneq ($$(call cc-option,$$($(2)),$(3),n),n)
+    ifneq ($$(call cc-option,$$($(2)),$(firstword $(3)),n),n)
         $(1) += $(3)
     endif
 endef
--- a/xen/Makefile
+++ b/xen/Makefile
@@ -415,6 +415,9 @@ AFLAGS += -D__ASSEMBLY__
 
 $(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--noexecstack)
 
+# Check to see whether the assembler supports the --sectname-subst option.
+$(call cc-option-add,AFLAGS,CC,-Wa$$(comma)--sectname-subst -DHAVE_AS_SECTNAME_SUBST)
+
 LDFLAGS-$(call ld-option,--warn-rwx-segments) += --no-warn-rwx-segments
 
 CFLAGS += $(CFLAGS-y)
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -28,6 +28,14 @@
 #include <asm/arm64/efibind.h>
 #endif
 
+/*
+ * Code here is, at least in part, ordering sensitive.  Annotations
+ * from xen/linkage.h therefore may not switch sections (honoring
+ * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
+ */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
+
 #define __HEAD_FLAG_PAGE_SIZE   ((PAGE_SHIFT - 10) / 2)
 
 #define __HEAD_FLAG_PHYS_BASE   1
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -140,6 +140,9 @@ SECTIONS
   .init.text : {
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        _einittext = .;
        . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
        *(.altinstr_replacement)
--- a/xen/arch/ppc/xen.lds.S
+++ b/xen/arch/ppc/xen.lds.S
@@ -103,6 +103,9 @@ SECTIONS
     DECL_SECTION(.init.text) {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/riscv/xen.lds.S
+++ b/xen/arch/riscv/xen.lds.S
@@ -98,6 +98,9 @@ SECTIONS
     .init.text : {
         _sinittext = .;
         *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        *(.init.text.*)
+#endif
         _einittext = .;
         . = ALIGN(PAGE_SIZE);        /* Avoid mapping alt insns executable */
     } :text
--- a/xen/arch/x86/indirect-thunk.S
+++ b/xen/arch/x86/indirect-thunk.S
@@ -11,6 +11,10 @@
 
 #include <asm/asm_defns.h>
 
+/* Section placement is done explicitly here; override the respective macro. */
+#undef SYM_PUSH_SECTION
+#define SYM_PUSH_SECTION(name, attr)
+
 .macro IND_THUNK_RETPOLINE reg:req
         call 1f
         int3
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -31,6 +31,9 @@ FUNC(entry_int82)
 
         mov   %rsp, %rdi
         call  do_entry_int82
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   compat_test_all_events
+#endif
 END(entry_int82)
 
 /* %rbx: struct vcpu */
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -771,6 +771,9 @@ END(common_interrupt)
 FUNC(entry_PF)
         ENDBR64
         movb  $X86_EXC_PF, EFRAME_entry_vector(%rsp)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   handle_exception
+#endif
 END(entry_PF)
 /* No special register assumptions. */
 FUNC(handle_exception, 0)
@@ -1084,8 +1087,11 @@ FUNC(entry_NMI)
         ENDBR64
         pushq $0
         movb  $X86_EXC_NMI, EFRAME_entry_vector(%rsp)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+        jmp   handle_ist_exception
+#endif
 END(entry_NMI)
-
+/* No special register assumptions. */
 FUNC(handle_ist_exception)
         ALTERNATIVE "", clac, X86_FEATURE_XEN_SMAP
         SAVE_ALL
--- a/xen/arch/x86/xen.lds.S
+++ b/xen/arch/x86/xen.lds.S
@@ -85,6 +85,9 @@ SECTIONS
        . = ALIGN(PAGE_SIZE);
        _stextentry = .;
        *(.text.entry)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.text.entry.*)
+#endif
        . = ALIGN(PAGE_SIZE);
        _etextentry = .;
 
@@ -204,6 +207,9 @@ SECTIONS
 #endif
        _sinittext = .;
        *(.init.text)
+#ifdef CONFIG_CC_SPLIT_SECTIONS
+       *(.init.text.*)
+#endif
        *(.text.startup)
        _einittext = .;
        /*
--- a/xen/include/xen/linkage.h
+++ b/xen/include/xen/linkage.h
@@ -18,6 +18,14 @@
 
 #define SYM_ALIGN(align...) .balign align
 
+#if defined(HAVE_AS_SECTNAME_SUBST) && defined(CONFIG_CC_SPLIT_SECTIONS)
+# define SYM_PUSH_SECTION(name, attr) \
+         .pushsection %S.name, attr, %progbits; \
+         .equ .Lsplit_section, 1
+#else
+# define SYM_PUSH_SECTION(name, attr)
+#endif
+
 #define SYM_L_GLOBAL(name) .globl name; .hidden name
 #define SYM_L_WEAK(name)   .weak name
 #define SYM_L_LOCAL(name)  /* nothing */
@@ -32,7 +40,14 @@
         SYM_ALIGN(align);                         \
         name:
 
-#define END(name) .size name, . - name
+#define END(name) \
+        .size name, . - name; \
+        .ifdef .Lsplit_section; \
+            .if .Lsplit_section; \
+                .popsection; \
+                .equ .Lsplit_section, 0; \
+            .endif; \
+        .endif
 
 /*
  * CODE_FILL in particular may need to expand to nothing (e.g. for RISC-V), in
@@ -47,6 +62,7 @@
 #endif
 
 #define FUNC(name, align...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, GLOBAL, DO_CODE_ALIGN(align))
 #define LABEL(name, align...) \
         SYM(name, NONE, GLOBAL, DO_CODE_ALIGN(align))
@@ -54,6 +70,7 @@
         SYM(name, DATA, GLOBAL, LASTARG(DATA_ALIGN, ## align), DATA_FILL)
 
 #define FUNC_LOCAL(name, align...) \
+        SYM_PUSH_SECTION(name, "ax"); \
         SYM(name, FUNC, LOCAL, DO_CODE_ALIGN(align))
 #define LABEL_LOCAL(name, align...) \
         SYM(name, NONE, LOCAL, DO_CODE_ALIGN(align))

Re: [PATCH v8 RESEND 1/6] Arm32: use new-style entry annotations for library code

[Julien Grall]

Hi Jan,

On 13/03/2025 08:06, Jan Beulich wrote:
> No functional change, albeit all globals now become hidden, and aliasing
> symbols (__aeabi_{u,}idiv) lose their function-ness and size.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm

Acked-by: Julien Grall <jgrall@amazon.com>

Cheers,

-- 
Julien Grall

Re: [PATCH v8 RESEND 2/6] Arm32: use new-style entry annotations for MMU code

[Julien Grall]

Hi Jan,

On 13/03/2025 08:07, Jan Beulich wrote:
> Locally override SYM_PUSH_SECTION() to retain the intended section
> association.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
> ---
> v7: New.
> 
> --- a/xen/arch/arm/arm32/mmu/head.S
> +++ b/xen/arch/arm/arm32/mmu/head.S
> @@ -160,6 +160,13 @@
>   .endm
>   
>   .section .text.idmap, "ax", %progbits
> +/*
> + * Code below wants to all live in the section established above.  Annotations
> + * from xen/linkage.h therefore may not switch sections (honoring
> + * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
> + */
> +#undef SYM_PUSH_SECTION
> +#define SYM_PUSH_SECTION(name, attr)

AFAICT, SYM_PUSH_SECTION doesn't exist yet. It is introduced by patch 
#6. Should this be moved to the last patch?

The rest of the patch LGTM to me. So with this addressed:

Acked-by: Julien Grall <jgrall@amazon.com>

Cheers,

-- 
Julien Grall

Re: [PATCH v8 RESEND 3/6] Arm32: use new-style entry annotations for entry code

[Julien Grall]

Hi Jan,

On 13/03/2025 08:07, Jan Beulich wrote:
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm

Acked-by: Julien Grall <jgrall@amazon.com>

> ---
> Should the GLOBAL()s also be replaced?

I guess the goal is to use helper from xen/linkage.h. So I would say 
yes. It doesn't need to be done in this series though.

Cheers,

-- 
Julien Grall

Re: [PATCH v8 RESEND 4/6] Arm32: use new-style entry annotations in head.S

[Julien Grall]

Hi Jan,

On 13/03/2025 08:08, Jan Beulich wrote:
> Locally override SYM_PUSH_SECTION() to retain the intended section
> association.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
> ---
> v8: Re-base.
> v7: New.
> 
> --- a/xen/arch/arm/arm32/head.S
> +++ b/xen/arch/arm/arm32/head.S
> @@ -48,13 +48,20 @@
>   
>           .section .text.header, "ax", %progbits
>           .arm
> +/*
> + * Code below wants to all live in the section established above.  Annotations
> + * from xen/linkage.h therefore may not switch sections (honoring
> + * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
> + */
> +#undef SYM_PUSH_SECTION
> +#define SYM_PUSH_SECTION(name, attr)

Similar to patch #2, I think SYM_PUSH_SECTION doesn't yet exist.

With that fixed:

Acked-by: Julien Grall <jgrall@amazon.com>

Cheers,

-- 
Julien Grall

Re: [PATCH v8 RESEND 4/6] Arm32: use new-style entry annotations in head.S

[Julien Grall]

Hi Jan,

On 13/03/2025 08:08, Jan Beulich wrote:
> Locally override SYM_PUSH_SECTION() to retain the intended section
> association.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
> ---
> v8: Re-base.
> v7: New.
> 
> --- a/xen/arch/arm/arm32/head.S
> +++ b/xen/arch/arm/arm32/head.S
> @@ -48,13 +48,20 @@
>   
>           .section .text.header, "ax", %progbits
>           .arm
> +/*
> + * Code below wants to all live in the section established above.  Annotations
> + * from xen/linkage.h therefore may not switch sections (honoring
> + * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
> + */
> +#undef SYM_PUSH_SECTION
> +#define SYM_PUSH_SECTION(name, attr)

Same as patch #2 and #6.

With that addressed:

Acked-by: Julien Grall <jgrall@amazon.com>

Cheers,

-- 
Julien Grall

Re: [PATCH v8 RESEND 6/6] common: honor CONFIG_CC_SPLIT_SECTIONS also for assembly functions

[Julien Grall]

Hi Jan,

I am not very familiar with CC_SPLIT_SECTIONS. But I will try to answer 
the Arm questions.

On 13/03/2025 08:10, Jan Beulich wrote:
> Leverage the new infrastructure in xen/linkage.h to also switch to per-
> function sections (when configured), deriving the specific name from the
> "base" section in use at the time FUNC() is invoked.
> 
> Signed-off-by: Jan Beulich <jbeulich@suse.com>
> Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
> ---
> TBD: Since we use .subsection in UNLIKELY_START(), a perhaps not really
>       wanted side effect of this change is that respective out-of-line
>       code now moves much closer to its original (invoking) code.
> 
> TBD: Of course something with the same overall effect, but less
>       impactful might do in Config.mk. E.g. $(filter-out -D%,$(3))
>       instead of $(firstword (3)). In fact Roger wants the detection to
>       be in Kconfig, for LIVEPATCH to depend on it. Yet the whole
>       underlying discussion there imo would first need settling (and
>       therefore reviving).
> 
> Note that we'd need to split DATA() in order to separate r/w, r/o, and
> BSS contributions. Further splitting might be needed to also support
> more advanced attributes (e.g. merge), hence why this isn't done right
> here. Sadly while a new section's name can be derived from the presently
> in use, its attributes cannot be. Perhaps the only thing we can do is
> give DATA() a 2nd mandatory parameter. Then again I guess most data
> definitions could be moved to C anyway.
> 
> An alternative to the "override" in arm64/head.S would be to use
> LABEL{,_LOCAL}() instead of FUNC{,_LOCAL}() there. Yet that would also
> lose the type information then. Question is whether the annotated ranges
 > really are "functions" in whichever wide or narrow sense.

They are functions. So I would prefer if we keep FUNC{,_LOCAL} and do 
the override as proposed in this patch..

Also, I think you want to move some of the override from the previous 
patches to this patch.

Cheers,

-- 
Julien Grall

Re: [PATCH v8 RESEND 2/6] Arm32: use new-style entry annotations for MMU code

[Jan Beulich]

On 28.03.2025 19:39, Julien Grall wrote:
> Hi Jan,
> 
> On 13/03/2025 08:07, Jan Beulich wrote:
>> Locally override SYM_PUSH_SECTION() to retain the intended section
>> association.
>>
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
>> ---
>> v7: New.
>>
>> --- a/xen/arch/arm/arm32/mmu/head.S
>> +++ b/xen/arch/arm/arm32/mmu/head.S
>> @@ -160,6 +160,13 @@
>>   .endm
>>   
>>   .section .text.idmap, "ax", %progbits
>> +/*
>> + * Code below wants to all live in the section established above.  Annotations
>> + * from xen/linkage.h therefore may not switch sections (honoring
>> + * CONFIG_CC_SPLIT_SECTIONS).  Override the respective macro.
>> + */
>> +#undef SYM_PUSH_SECTION
>> +#define SYM_PUSH_SECTION(name, attr)
> 
> AFAICT, SYM_PUSH_SECTION doesn't exist yet. It is introduced by patch 
> #6. Should this be moved to the last patch?

Perhaps; I failed to notice this when I moved that patch last. I doesn't hurt
to live right here, but I agree it's better to move it.

> The rest of the patch LGTM to me. So with this addressed:
> 
> Acked-by: Julien Grall <jgrall@amazon.com>

Thanks.

Jan

Re: [PATCH v8 RESEND 3/6] Arm32: use new-style entry annotations for entry code

[Jan Beulich]

On 28.03.2025 19:46, Julien Grall wrote:
> On 13/03/2025 08:07, Jan Beulich wrote:
>> Signed-off-by: Jan Beulich <jbeulich@suse.com>
>> Tested-by: Luca Fancellu <luca.fancellu@arm.com> # arm
> 
> Acked-by: Julien Grall <jgrall@amazon.com>

Thanks.

>> ---
>> Should the GLOBAL()s also be replaced?
> 
> I guess the goal is to use helper from xen/linkage.h.

Yes. Imo in the long run we shouldn't have more than one annotation
scheme.

Jan

> So I would say 
> yes. It doesn't need to be done in this series though.
> 
> Cheers,
>