Re: [PATCH v2 00/14] Split crash out from kexec and clean up related config items

[Baoquan He <bhe@redhat.com>]

On 02/02/24 at 10:53am, Hari Bathini wrote:
> Hi Baoquan,
> 
> On 19/01/24 8:22 pm, Baoquan He wrote:
> > Motivation:
> > =============
> > Previously, LKP reported a building error. When investigating, it can't
> > be resolved reasonablly with the present messy kdump config items.
> > 
> >   https://lore.kernel.org/oe-kbuild-all/202312182200.Ka7MzifQ-lkp@intel.com/
> > 
> > The kdump (crash dumping) related config items could causes confusions:
> > 
> > Firstly,
> > ---
> > CRASH_CORE enables codes including
> >   - crashkernel reservation;
> >   - elfcorehdr updating;
> >   - vmcoreinfo exporting;
> >   - crash hotplug handling;
> > 
> > Now fadump of powerpc, kcore dynamic debugging and kdump all selects
> > CRASH_CORE, while fadump
> >   - fadump needs crashkernel parsing, vmcoreinfo exporting, and accessing
> >     global variable 'elfcorehdr_addr';
> >   - kcore only needs vmcoreinfo exporting;
> >   - kdump needs all of the current kernel/crash_core.c.
> > 
> > So only enabling PROC_CORE or FA_DUMP will enable CRASH_CORE, this
> > mislead people that we enable crash dumping, actual it's not.
> > 
> > Secondly,
> > ---
> > It's not reasonable to allow KEXEC_CORE select CRASH_CORE.
> > 
> > Because KEXEC_CORE enables codes which allocate control pages, copy
> > kexec/kdump segments, and prepare for switching. These codes are
> > shared by both kexec reboot and kdump. We could want kexec reboot,
> > but disable kdump. In that case, CRASH_CORE should not be selected.
> > 
> >   --------------------
> >   CONFIG_CRASH_CORE=y
> >   CONFIG_KEXEC_CORE=y
> >   CONFIG_KEXEC=y
> >   CONFIG_KEXEC_FILE=y
> >      ---------------------
> > 
> > Thirdly,
> > ---
> > It's not reasonable to allow CRASH_DUMP select KEXEC_CORE.
> > 
> > That could make KEXEC_CORE, CRASH_DUMP are enabled independently from
> > KEXEC or KEXEC_FILE. However, w/o KEXEC or KEXEC_FILE, the KEXEC_CORE
> > code built in doesn't make any sense because no kernel loading or
> > switching will happen to utilize the KEXEC_CORE code.
> >   ---------------------
> >   CONFIG_CRASH_CORE=y
> >   CONFIG_KEXEC_CORE=y
> >   CONFIG_CRASH_DUMP=y
> >   ---------------------
> > 
> > In this case, what is worse, on arch sh and arm, KEXEC relies on MMU,
> > while CRASH_DUMP can still be enabled when !MMU, then compiling error is
> > seen as the lkp test robot reported in above link.
> > 
> >   ------arch/sh/Kconfig------
> >   config ARCH_SUPPORTS_KEXEC
> >           def_bool MMU
> > 
> >   config ARCH_SUPPORTS_CRASH_DUMP
> >           def_bool BROKEN_ON_SMP
> >   ---------------------------
> > 
> > Changes:
> > ===========
> > 1, split out crash_reserve.c from crash_core.c;
> > 2, split out vmcore_infoc. from crash_core.c;
> > 3, move crash related codes in kexec_core.c into crash_core.c;
> > 4, remove dependency of FA_DUMP on CRASH_DUMP;
> > 5, clean up kdump related config items;
> > 6, wrap up crash codes in crash related ifdefs on all 9 arch-es
> >     which support crash dumping;
> > 
> > Achievement:
> > ===========
> > With above changes, I can rearrange the config item logic as below (the right
> > item depends on or is selected by the left item):
> > 
> >      PROC_KCORE -----------> VMCORE_INFO
> > 
> >                 |----------> VMCORE_INFO
> >      FA_DUMP----|
> >                 |----------> CRASH_RESERVE
> 
> FA_DUMP also needs PROC_VMCORE (CRASH_DUMP by dependency, I guess).
> So, the FA_DUMP related changes here will need a relook..

Thanks for checking this.

So FA_DUMP needs vmcoreinfo exporting, crashkernel reservation,
/proc/vmcore. Then it's easy to adjust the kernel config item of FA_DUMP
to make it select CRASH_DUMP. Except of this, do you have concern about
the current code and Kconfig refactorying?


                           ---->VMCORE_INFO
                         /|
FA_DUMP--> CRASH_DUMP-->/-|---->CRASH_RESERVE
                        \ |
                          \---->PROC_VMCORE


> 
> 
> >                                                      ---->VMCORE_INFO
> >                                                     /
> >                                                     |---->CRASH_RESERVE
> >      KEXEC      --|                                /|
> >                   |--> KEXEC_CORE--> CRASH_DUMP-->/-|---->PROC_VMCORE
> >      KEXEC_FILE --|                               \ |
> >                                                     \---->CRASH_HOTPLUG
> > 
> > 
> >      KEXEC      --|
> >                   |--> KEXEC_CORE (for kexec reboot only)
> >      KEXEC_FILE --|
> > 
> > Test
> > ========
> > On all 8 architectures, including x86_64, arm64, s390x, sh, arm, mips,
> > riscv, loongarch, I did below three cases of config item setting and
> > building all passed. Let me take configs on x86_64 as exampmle here:
> > 
> > (1) Both CONFIG_KEXEC and KEXEC_FILE is unset, then all kexec/kdump
> > items are unset automatically:
> > # Kexec and crash features
> > # CONFIG_KEXEC is not set
> > # CONFIG_KEXEC_FILE is not set
> > # end of Kexec and crash features
> > 
> > (2) set CONFIG_KEXEC_FILE and 'make olddefconfig':
> > ---------------
> > # Kexec and crash features
> > CONFIG_CRASH_RESERVE=y
> > CONFIG_VMCORE_INFO=y
> > CONFIG_KEXEC_CORE=y
> > CONFIG_KEXEC_FILE=y
> > CONFIG_CRASH_DUMP=y
> > CONFIG_CRASH_HOTPLUG=y
> > CONFIG_CRASH_MAX_MEMORY_RANGES=8192
> > # end of Kexec and crash features
> > ---------------
> > 
> > (3) unset CONFIG_CRASH_DUMP in case 2 and execute 'make olddefconfig':
> > ------------------------
> > # Kexec and crash features
> > CONFIG_KEXEC_CORE=y
> > CONFIG_KEXEC_FILE=y
> > # end of Kexec and crash features
> > ------------------------
> > 
> > Note:
> > For ppc, it needs investigation to make clear how to split out crash
> > code in arch folder.
> 
> On powerpc, both kdump and fadump need PROC_VMCORE & CRASH_DUMP.
> Hope that clears things. So, patch 3/14 breaks things for FA_DUMP..

I see it now. We can easily fix that with below patch. What do you
think?

By the way, do you have chance to help test these on powerpc system?
I can find ppc64le machine, while I don't know how to operate to test
fadump.

From fa8e6c3930d4f22f2b3768399c5bf0523c17adde Mon Sep 17 00:00:00 2001
From: Baoquan He <bhe@redhat.com>
Date: Sun, 4 Feb 2024 11:06:54 +0800
Subject: [PATCH] power/fadump: make FA_DUMP select CRASH_DUMP
Content-type: text/plain

FA_DUMP which is similar with kdump needs vmcoreinfo exporting,
crashkernel reservation and /proc/vmcore file . After refactoring crash
related codes and Kconfig items, make FA_DUMP select CRASH_DUMP. Now
the dependency layout is like below:

                           ---->VMCORE_INFO
                         /|
FA_DUMP--> CRASH_DUMP-->/-|---->CRASH_RESERVE
                        \ |
                          \---->PROC_VMCORE

Signed-off-by: Baoquan He <bhe@redhat.com>
---
 arch/powerpc/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index f182fb354bef..d5d4c890f010 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -695,8 +695,7 @@ config ARCH_SELECTS_CRASH_DUMP
 config FA_DUMP
 	bool "Firmware-assisted dump"
 	depends on PPC64 && (PPC_RTAS || PPC_POWERNV)
-	select VMCORE_INFO
-	select CRASH_RESERVE
+	select CRASH_DUMP
 	help
 	  A robust mechanism to get reliable kernel crash dump with
 	  assistance from firmware. This approach does not use kexec,
-- 
2.41.0


> 
> > Hope Hari and Pingfan can help have a look, see if
> > it's doable. Now, I make it either have both kexec and crash enabled, or
> > disable both of them altogether.
> 
> 
> Sure. I will take a closer look...

Thanks a lot. Please feel free to post patches to make that, or I can do
it with your support or suggestion.


_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec