From: Lorenzo Pieralisi <lpieralisi@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: manivannan.sadhasivam@linaro.org, bhelgaas@google.com,
conor+dt@kernel.org, devicetree@vger.kernel.org,
festevam@gmail.com, helgaas@kernel.org, hongxing.zhu@nxp.com,
imx@lists.linux.dev, kernel@pengutronix.de,
krzysztof.kozlowski+dt@linaro.org,
krzysztof.kozlowski@linaro.org, kw@linux.com,
l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org,
linux-imx@nxp.com, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, robh@kernel.org,
s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: Re: [PATCH v9 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask
Date: Tue, 13 Feb 2024 11:57:55 +0100 [thread overview]
Message-ID: <ZctLM7xLf7L3CJrr@lpieralisi> (raw)
In-Reply-To: <20240119171122.3057511-8-Frank.Li@nxp.com>
On Fri, Jan 19, 2024 at 12:11:13PM -0500, Frank Li wrote:
> Add drvdata::mode_off and drvdata::mode_mask to simplify
> imx6_pcie_configure_type() logic.
>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>
> Notes:
> Chagne from v8 to v9
> - add Manivannan's review tag
> Change from v7 to v8
> - replace simple with simplify
> - remove reduntant comments about FILED_PREP
> Change from v3 to v7
> - none
> Change from v2 to v3
> - none
> Change from v1 to v2
> - use ffs() to fixe build error.
>
> Change from v2 to v3
> - none
> Change from v1 to v2
> - use ffs() to fixe build error.
>
> drivers/pci/controller/dwc/pci-imx6.c | 59 ++++++++++++++++++---------
> 1 file changed, 39 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index d19fcb54fde0d..8df07b71c93e5 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -68,6 +68,7 @@ enum imx6_pcie_variants {
>
> #define IMX6_PCIE_MAX_CLKS 6
>
> +#define IMX6_PCIE_MAX_INSTANCES 2
> struct imx6_pcie_drvdata {
> enum imx6_pcie_variants variant;
> enum dw_pcie_device_mode mode;
> @@ -78,6 +79,8 @@ struct imx6_pcie_drvdata {
> const u32 clks_cnt;
> const u32 ltssm_off;
> const u32 ltssm_mask;
> + const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
> + const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
> };
>
> struct imx6_pcie {
> @@ -174,32 +177,24 @@ static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
>
> static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
> {
> - unsigned int mask, val, mode;
> + const struct imx6_pcie_drvdata *drvdata = imx6_pcie->drvdata;
> + unsigned int mask, val, mode, id;
>
> - if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE)
> + if (drvdata->mode == DW_PCIE_EP_TYPE)
> mode = PCI_EXP_TYPE_ENDPOINT;
> else
> mode = PCI_EXP_TYPE_ROOT_PORT;
>
> - switch (imx6_pcie->drvdata->variant) {
> - case IMX8MQ:
> - case IMX8MQ_EP:
> - if (imx6_pcie->controller_id == 1) {
> - mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
> - val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> - mode);
> - } else {
> - mask = IMX6Q_GPR12_DEVICE_TYPE;
> - val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
> - }
> - break;
> - default:
> - mask = IMX6Q_GPR12_DEVICE_TYPE;
> - val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
> - break;
> - }
> + id = imx6_pcie->controller_id;
> +
> + /* If mode_mask[id] is zero, means each controller have its individual gpr */
> + if (!drvdata->mode_mask[id])
> + id = 0;
I don't understand what this means. If the mode mask for id is == 0, we
are falling back to mode_mask and mode_off for controller ID 0 ? Is that
what this code is supposed to do ? If so the comment makes no sense to
me.
Lorenzo
> +
> + mask = drvdata->mode_mask[id];
> + val = mode << (ffs(mask) - 1);
>
> - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
> + regmap_update_bits(imx6_pcie->iomuxc_gpr, drvdata->mode_off[id], mask, val);
> }
>
> static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
> @@ -1385,6 +1380,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .clks_cnt = ARRAY_SIZE(imx6q_clks),
> .ltssm_off = IOMUXC_GPR12,
> .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX6SX] = {
> .variant = IMX6SX,
> @@ -1396,6 +1393,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .clks_cnt = ARRAY_SIZE(imx6sx_clks),
> .ltssm_off = IOMUXC_GPR12,
> .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX6QP] = {
> .variant = IMX6QP,
> @@ -1408,6 +1407,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .clks_cnt = ARRAY_SIZE(imx6q_clks),
> .ltssm_off = IOMUXC_GPR12,
> .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX7D] = {
> .variant = IMX7D,
> @@ -1417,6 +1418,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx7d-iomuxc-gpr",
> .clk_names = imx6q_clks,
> .clks_cnt = ARRAY_SIZE(imx6q_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX8MQ] = {
> .variant = IMX8MQ,
> @@ -1425,6 +1428,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mq-iomuxc-gpr",
> .clk_names = imx8mq_clks,
> .clks_cnt = ARRAY_SIZE(imx8mq_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> + .mode_off[1] = IOMUXC_GPR12,
> + .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> },
> [IMX8MM] = {
> .variant = IMX8MM,
> @@ -1434,6 +1441,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mm-iomuxc-gpr",
> .clk_names = imx8mm_clks,
> .clks_cnt = ARRAY_SIZE(imx8mm_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX8MP] = {
> .variant = IMX8MP,
> @@ -1443,6 +1452,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mp-iomuxc-gpr",
> .clk_names = imx8mm_clks,
> .clks_cnt = ARRAY_SIZE(imx8mm_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX8MQ_EP] = {
> .variant = IMX8MQ_EP,
> @@ -1452,6 +1463,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mq-iomuxc-gpr",
> .clk_names = imx8mq_clks,
> .clks_cnt = ARRAY_SIZE(imx8mq_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> + .mode_off[1] = IOMUXC_GPR12,
> + .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> },
> [IMX8MM_EP] = {
> .variant = IMX8MM_EP,
> @@ -1460,6 +1475,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mm-iomuxc-gpr",
> .clk_names = imx8mm_clks,
> .clks_cnt = ARRAY_SIZE(imx8mm_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX8MP_EP] = {
> .variant = IMX8MP_EP,
> @@ -1468,6 +1485,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mp-iomuxc-gpr",
> .clk_names = imx8mm_clks,
> .clks_cnt = ARRAY_SIZE(imx8mm_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> };
>
> --
> 2.34.1
>
WARNING: multiple messages have this Message-ID (diff)
From: Lorenzo Pieralisi <lpieralisi@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: manivannan.sadhasivam@linaro.org, bhelgaas@google.com,
conor+dt@kernel.org, devicetree@vger.kernel.org,
festevam@gmail.com, helgaas@kernel.org, hongxing.zhu@nxp.com,
imx@lists.linux.dev, kernel@pengutronix.de,
krzysztof.kozlowski+dt@linaro.org,
krzysztof.kozlowski@linaro.org, kw@linux.com,
l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org,
linux-imx@nxp.com, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, robh@kernel.org,
s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: Re: [PATCH v9 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask
Date: Tue, 13 Feb 2024 11:57:55 +0100 [thread overview]
Message-ID: <ZctLM7xLf7L3CJrr@lpieralisi> (raw)
In-Reply-To: <20240119171122.3057511-8-Frank.Li@nxp.com>
On Fri, Jan 19, 2024 at 12:11:13PM -0500, Frank Li wrote:
> Add drvdata::mode_off and drvdata::mode_mask to simplify
> imx6_pcie_configure_type() logic.
>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>
> Notes:
> Chagne from v8 to v9
> - add Manivannan's review tag
> Change from v7 to v8
> - replace simple with simplify
> - remove reduntant comments about FILED_PREP
> Change from v3 to v7
> - none
> Change from v2 to v3
> - none
> Change from v1 to v2
> - use ffs() to fixe build error.
>
> Change from v2 to v3
> - none
> Change from v1 to v2
> - use ffs() to fixe build error.
>
> drivers/pci/controller/dwc/pci-imx6.c | 59 ++++++++++++++++++---------
> 1 file changed, 39 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index d19fcb54fde0d..8df07b71c93e5 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -68,6 +68,7 @@ enum imx6_pcie_variants {
>
> #define IMX6_PCIE_MAX_CLKS 6
>
> +#define IMX6_PCIE_MAX_INSTANCES 2
> struct imx6_pcie_drvdata {
> enum imx6_pcie_variants variant;
> enum dw_pcie_device_mode mode;
> @@ -78,6 +79,8 @@ struct imx6_pcie_drvdata {
> const u32 clks_cnt;
> const u32 ltssm_off;
> const u32 ltssm_mask;
> + const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
> + const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
> };
>
> struct imx6_pcie {
> @@ -174,32 +177,24 @@ static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
>
> static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
> {
> - unsigned int mask, val, mode;
> + const struct imx6_pcie_drvdata *drvdata = imx6_pcie->drvdata;
> + unsigned int mask, val, mode, id;
>
> - if (imx6_pcie->drvdata->mode == DW_PCIE_EP_TYPE)
> + if (drvdata->mode == DW_PCIE_EP_TYPE)
> mode = PCI_EXP_TYPE_ENDPOINT;
> else
> mode = PCI_EXP_TYPE_ROOT_PORT;
>
> - switch (imx6_pcie->drvdata->variant) {
> - case IMX8MQ:
> - case IMX8MQ_EP:
> - if (imx6_pcie->controller_id == 1) {
> - mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
> - val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> - mode);
> - } else {
> - mask = IMX6Q_GPR12_DEVICE_TYPE;
> - val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
> - }
> - break;
> - default:
> - mask = IMX6Q_GPR12_DEVICE_TYPE;
> - val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, mode);
> - break;
> - }
> + id = imx6_pcie->controller_id;
> +
> + /* If mode_mask[id] is zero, means each controller have its individual gpr */
> + if (!drvdata->mode_mask[id])
> + id = 0;
I don't understand what this means. If the mode mask for id is == 0, we
are falling back to mode_mask and mode_off for controller ID 0 ? Is that
what this code is supposed to do ? If so the comment makes no sense to
me.
Lorenzo
> +
> + mask = drvdata->mode_mask[id];
> + val = mode << (ffs(mask) - 1);
>
> - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
> + regmap_update_bits(imx6_pcie->iomuxc_gpr, drvdata->mode_off[id], mask, val);
> }
>
> static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
> @@ -1385,6 +1380,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .clks_cnt = ARRAY_SIZE(imx6q_clks),
> .ltssm_off = IOMUXC_GPR12,
> .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX6SX] = {
> .variant = IMX6SX,
> @@ -1396,6 +1393,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .clks_cnt = ARRAY_SIZE(imx6sx_clks),
> .ltssm_off = IOMUXC_GPR12,
> .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX6QP] = {
> .variant = IMX6QP,
> @@ -1408,6 +1407,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .clks_cnt = ARRAY_SIZE(imx6q_clks),
> .ltssm_off = IOMUXC_GPR12,
> .ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX7D] = {
> .variant = IMX7D,
> @@ -1417,6 +1418,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx7d-iomuxc-gpr",
> .clk_names = imx6q_clks,
> .clks_cnt = ARRAY_SIZE(imx6q_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX8MQ] = {
> .variant = IMX8MQ,
> @@ -1425,6 +1428,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mq-iomuxc-gpr",
> .clk_names = imx8mq_clks,
> .clks_cnt = ARRAY_SIZE(imx8mq_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> + .mode_off[1] = IOMUXC_GPR12,
> + .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> },
> [IMX8MM] = {
> .variant = IMX8MM,
> @@ -1434,6 +1441,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mm-iomuxc-gpr",
> .clk_names = imx8mm_clks,
> .clks_cnt = ARRAY_SIZE(imx8mm_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX8MP] = {
> .variant = IMX8MP,
> @@ -1443,6 +1452,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mp-iomuxc-gpr",
> .clk_names = imx8mm_clks,
> .clks_cnt = ARRAY_SIZE(imx8mm_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX8MQ_EP] = {
> .variant = IMX8MQ_EP,
> @@ -1452,6 +1463,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mq-iomuxc-gpr",
> .clk_names = imx8mq_clks,
> .clks_cnt = ARRAY_SIZE(imx8mq_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> + .mode_off[1] = IOMUXC_GPR12,
> + .mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
> },
> [IMX8MM_EP] = {
> .variant = IMX8MM_EP,
> @@ -1460,6 +1475,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mm-iomuxc-gpr",
> .clk_names = imx8mm_clks,
> .clks_cnt = ARRAY_SIZE(imx8mm_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> [IMX8MP_EP] = {
> .variant = IMX8MP_EP,
> @@ -1468,6 +1485,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> .gpr = "fsl,imx8mp-iomuxc-gpr",
> .clk_names = imx8mm_clks,
> .clks_cnt = ARRAY_SIZE(imx8mm_clks),
> + .mode_off[0] = IOMUXC_GPR12,
> + .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> },
> };
>
> --
> 2.34.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-13 10:58 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-19 17:11 [PATCH v9 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 01/16] PCI: imx6: Simplify clock handling by using clk_bulk*() function Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 02/16] PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 03/16] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 04/16] dt-bindings: imx6q-pcie: Add linux,pci-domain as required for iMX8MQ Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 05/16] PCI: imx6: Using "linux,pci-domain" as slot ID Frank Li
2024-01-19 17:11 ` Frank Li
2024-02-02 12:12 ` Lorenzo Pieralisi
2024-02-02 12:12 ` Lorenzo Pieralisi
2024-02-02 13:25 ` Frank Li
2024-02-02 13:25 ` Frank Li
2024-02-02 18:53 ` Lorenzo Pieralisi
2024-02-02 18:53 ` Lorenzo Pieralisi
2024-02-05 17:41 ` Frank Li
2024-02-05 17:41 ` Frank Li
2024-02-02 21:54 ` Bjorn Helgaas
2024-02-02 21:54 ` Bjorn Helgaas
2024-02-02 22:22 ` Frank Li
2024-02-02 22:22 ` Frank Li
2024-02-02 22:51 ` Bjorn Helgaas
2024-02-02 22:51 ` Bjorn Helgaas
2024-02-03 1:01 ` Frank Li
2024-02-03 1:01 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 06/16] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 07/16] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Frank Li
2024-01-19 17:11 ` Frank Li
2024-02-13 10:57 ` Lorenzo Pieralisi [this message]
2024-02-13 10:57 ` Lorenzo Pieralisi
2024-01-19 17:11 ` [PATCH v9 08/16] PCI: imx6: Simplify switch-case logic by involve init_phy callback Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 09/16] dt-bindings: imx6q-pcie: Clean up irrationality clocks check Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 10/16] dt-bindings: imx6q-pcie: Restruct reg and reg-name Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-23 20:36 ` Rob Herring
2024-01-23 20:36 ` Rob Herring
2024-01-19 17:11 ` [PATCH v9 11/16] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 12/16] PCI: imx6: Add iMX95 PCIe Root Complex support Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 13/16] PCI: imx6: Clean up get addr_space code Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 14/16] PCI: imx6: Add epc_features in imx6_pcie_drvdata Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 15/16] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string Frank Li
2024-01-19 17:11 ` Frank Li
2024-01-19 17:11 ` [PATCH v9 16/16] PCI: imx6: Add iMX95 Endpoint (EP) support Frank Li
2024-01-19 17:11 ` Frank Li
2024-02-13 10:38 ` Lorenzo Pieralisi
2024-02-13 10:38 ` Lorenzo Pieralisi
2024-02-13 13:23 ` Robin Murphy
2024-02-13 13:23 ` Robin Murphy
2024-02-13 15:35 ` Frank Li
2024-02-13 15:35 ` Frank Li
2024-01-25 15:31 ` [PATCH v9 00/16] PCI: imx6: Clean up and add imx95 pci support Frank Li
2024-01-25 15:31 ` Frank Li
2024-02-01 19:34 ` Frank Li
2024-02-01 19:34 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZctLM7xLf7L3CJrr@lpieralisi \
--to=lpieralisi@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=helgaas@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.