From: "Yann E. MORIN" <yann.morin.1998@free.fr>
To: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>, buildroot@buildroot.org
Subject: Re: [Buildroot] [PATCH v3] package/attr: fix build failure on Microblaze architecture
Date: Sun, 18 Feb 2024 21:12:56 +0100 [thread overview]
Message-ID: <ZdJkyGKeZ3G5QxWD@landeda> (raw)
In-Reply-To: <20240218082012.3425825-1-giulio.benetti@benettiengineering.com>
giulio, all,
On 2024-02-18 09:20 +0100, Giulio Benetti spake thusly:
> On Microblaze architecture __has_attribute(__symver__) support is broken
> and always return true even if symver is not supported so let's add an
> upstream patch to detect if symver is supported during autoreconf. Let's
> also add ATTR_AUTORECONF = YES to let patch to affect building.
>
> Fixes:
> http://autobuild.buildroot.org/results/29c76e02becedf922bd7dc0533338c078bf77d2a
>
> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Applied to master, thanks.
Regards,
Yann E. MORIN.
> ---
> V1->V2:
> * written commit log as suggested by Thomas(there was no commit log at all
> since this patch has been pointed during Buildroot Dev Days in IRC to me)
> * re-sent local patch to the correct maililng list and updated Upstream:
> URL
> V2->V3:
> * since patch has been upstreamed after a little rework, use it and point
> upstream commit URL
> ---
> ...dd-detection-of-symver-gcc-attribute.patch | 75 +++++++++++++++++++
> package/attr/attr.mk | 3 +
> 2 files changed, 78 insertions(+)
> create mode 100644 package/attr/0002-configure.ac-add-detection-of-symver-gcc-attribute.patch
>
> diff --git a/package/attr/0002-configure.ac-add-detection-of-symver-gcc-attribute.patch b/package/attr/0002-configure.ac-add-detection-of-symver-gcc-attribute.patch
> new file mode 100644
> index 0000000000..ee029e9735
> --- /dev/null
> +++ b/package/attr/0002-configure.ac-add-detection-of-symver-gcc-attribute.patch
> @@ -0,0 +1,75 @@
> +From 365426c28f8bf73d34d77cc06b7d5ffeae17f13a Mon Sep 17 00:00:00 2001
> +From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> +Date: Tue, 6 Feb 2024 15:33:15 +0100
> +Subject: [PATCH] configure.ac: add detection of symver gcc attribute
> +
> +On non-ELF platforms, such as microblaze, builds will fail when trying
> +to add symver information because __attribute__((symver ..)) is not
> +supported even though __has_attribute(__symver__) returns true.
> +
> +Support for symver needs to be detected via a compile test since
> +__has_attribute can report false positives [0].
> +
> +Add a configure compile check for __attribute__((symver ..)) to ensure
> +it is supported and define a variable to advertise support.
> +
> +[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101766#c1
> +
> +Upstream: https://git.savannah.nongnu.org/cgit/attr.git/commit/?id=943c776089dbb24ebbfb7432ba9841f1845bf95a
> +
> +Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> +[Giulio: rework local patch for #if nesting]
> +Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> +---
> + configure.ac | 15 +++++++++++++++
> + libattr/syscalls.c | 8 ++++----
> + 2 files changed, 19 insertions(+), 4 deletions(-)
> +
> +diff --git a/configure.ac b/configure.ac
> +index 7e362e9..98477b5 100644
> +--- a/configure.ac
> ++++ b/configure.ac
> +@@ -57,6 +57,21 @@ AS_CASE([$host_os],
> + [linux*], [os_linux=yes])
> + AM_CONDITIONAL([OS_LINUX], [test "x$os_linux" = "xyes"])
> +
> ++AC_CACHE_CHECK(whether __attribute__((__symver__())) is supported,
> ++ gcc_cv_symver_attribute,
> ++ [cat > conftest.c <<EOF
> ++void foo (void) {}
> ++__typeof(foo) foo __attribute__ ((__symver__("foo@foo")));
> ++EOF
> ++ gcc_cv_symver_attribute=no
> ++ if ${CC-cc} -Werror -S conftest.c -o conftest.s >/dev/null 2>&1; then \
> ++ gcc_cv_symver_attribute=yes
> ++ fi
> ++ rm -f conftest.[cs]
> ++])
> ++AS_IF([test $gcc_cv_symver_attribute = yes],
> ++ [AC_DEFINE(HAVE_SYMVER_ATTRIBUTE, [], [GCC supports symver attribute])])
> ++
> + AC_CONFIG_COMMANDS([include/attr],
> + [dnl
> + rm -rf include/attr
> +diff --git a/libattr/syscalls.c b/libattr/syscalls.c
> +index 907560a..7ee6d39 100644
> +--- a/libattr/syscalls.c
> ++++ b/libattr/syscalls.c
> +@@ -31,10 +31,10 @@
> + * prefer symver attribute if available (since gcc 10),
> + * fall back to traditional .symver asm directive otherwise.
> + */
> +-#ifdef __has_attribute
> +-# if __has_attribute(__symver__)
> +-# define SYMVER(cn, vn) __typeof(cn) cn __attribute__((__symver__(vn)))
> +-# elif __has_attribute(__no_reorder__)
> ++#if defined(HAVE_SYMVER_ATTRIBUTE)
> ++# define SYMVER(cn, vn) __typeof(cn) cn __attribute__((__symver__(vn)))
> ++#elif defined(__has_attribute)
> ++# if __has_attribute(__no_reorder__)
> + /*
> + * Avoid wrong partitioning with older gcc and LTO. May not work reliably
> + * with all versions; use -flto-partition=none if you encounter problems.
> +--
> +2.34.1
> +
> diff --git a/package/attr/attr.mk b/package/attr/attr.mk
> index d1397921ff..1d24144f46 100644
> --- a/package/attr/attr.mk
> +++ b/package/attr/attr.mk
> @@ -11,6 +11,9 @@ ATTR_LICENSE = GPL-2.0+ (programs), LGPL-2.1+ (libraries)
> ATTR_LICENSE_FILES = doc/COPYING doc/COPYING.LGPL
> ATTR_CPE_ID_VALID = YES
>
> +# Flag added for patch dealing with symver in configure.ac
> +ATTR_AUTORECONF = YES
> +
> ATTR_INSTALL_STAGING = YES
>
> ATTR_CONF_OPTS = --disable-nls
> --
> 2.34.1
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
prev parent reply other threads:[~2024-02-18 20:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-18 8:20 [Buildroot] [PATCH v3] package/attr: fix build failure on Microblaze architecture Giulio Benetti
2024-02-18 20:12 ` Yann E. MORIN [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZdJkyGKeZ3G5QxWD@landeda \
--to=yann.morin.1998@free.fr \
--cc=buildroot@buildroot.org \
--cc=giulio.benetti@benettiengineering.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.