From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
Date: Thu, 22 Feb 2024 15:23:24 +0200 [thread overview]
Message-ID: <ZddKzHplwOX7naLv@smile.fi.intel.com> (raw)
In-Reply-To: <0a828f2c50de712940fb9a881702ac1678a35b7c.camel@codeconstruct.com.au>
On Thu, Feb 22, 2024 at 11:07:05AM +1030, Andrew Jeffery wrote:
> On Wed, 2024-02-21 at 20:31 +0200, Andy Shevchenko wrote:
> > Since we have now a common helper to read port properties
> > use it instead of sparse home grown solution.
>
> I did some brief testing of the series for the Aspeed machines under
> qemu, building them on top of v6.8-rc5:
>
> export ARCH=arm
> export CROSS_COMPILE=arm-linux-gnueabihf-
> make aspeed_g5_defconfig
> make -j$(nproc)
> qemu-system-arm -M rainier-bmc -nographic -no-reboot -kernel arch/arm/boot/zImage -dtb arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb -initrd ...
>
> I got an oops during boot, which bisected to this change:
Thank you for prompt testing! I will look at it.
--
With Best Regards,
Andy Shevchenko
WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Thomas Gleixner" <tglx@linutronix.de>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org,
linux-rpi-kernel@lists.infradead.org, linux-mips@vger.kernel.org,
linux-tegra@vger.kernel.org, "Jiri Slaby" <jirislaby@kernel.org>,
"Joel Stanley" <joel@jms.id.au>,
"Florian Fainelli" <florian.fainelli@broadcom.com>,
"Ray Jui" <rjui@broadcom.com>,
"Scott Branden" <sbranden@broadcom.com>,
"Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Al Cooper" <alcooperx@gmail.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Paul Cercueil" <paul@crapouillou.net>,
"Vladimir Zapolskiy" <vz@mleia.com>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Jonathan Hunter" <jonathanh@nvidia.com>,
"Kunihiko Hayashi" <hayashi.kunihiko@socionext.com>,
"Masami Hiramatsu" <mhiramat@kernel.org>,
"Andi Shyti" <andi.shyti@linux.intel.com>
Subject: Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
Date: Thu, 22 Feb 2024 15:23:24 +0200 [thread overview]
Message-ID: <ZddKzHplwOX7naLv@smile.fi.intel.com> (raw)
In-Reply-To: <0a828f2c50de712940fb9a881702ac1678a35b7c.camel@codeconstruct.com.au>
On Thu, Feb 22, 2024 at 11:07:05AM +1030, Andrew Jeffery wrote:
> On Wed, 2024-02-21 at 20:31 +0200, Andy Shevchenko wrote:
> > Since we have now a common helper to read port properties
> > use it instead of sparse home grown solution.
>
> I did some brief testing of the series for the Aspeed machines under
> qemu, building them on top of v6.8-rc5:
>
> export ARCH=arm
> export CROSS_COMPILE=arm-linux-gnueabihf-
> make aspeed_g5_defconfig
> make -j$(nproc)
> qemu-system-arm -M rainier-bmc -nographic -no-reboot -kernel arch/arm/boot/zImage -dtb arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb -initrd ...
>
> I got an oops during boot, which bisected to this change:
Thank you for prompt testing! I will look at it.
--
With Best Regards,
Andy Shevchenko
WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Thomas Gleixner" <tglx@linutronix.de>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org,
linux-rpi-kernel@lists.infradead.org, linux-mips@vger.kernel.org,
linux-tegra@vger.kernel.org, "Jiri Slaby" <jirislaby@kernel.org>,
"Joel Stanley" <joel@jms.id.au>,
"Florian Fainelli" <florian.fainelli@broadcom.com>,
"Ray Jui" <rjui@broadcom.com>,
"Scott Branden" <sbranden@broadcom.com>,
"Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Al Cooper" <alcooperx@gmail.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Paul Cercueil" <paul@crapouillou.net>,
"Vladimir Zapolskiy" <vz@mleia.com>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Jonathan Hunter" <jonathanh@nvidia.com>,
"Kunihiko Hayashi" <hayashi.kunihiko@socionext.com>,
"Masami Hiramatsu" <mhiramat@kernel.org>,
"Andi Shyti" <andi.shyti@linux.intel.com>
Subject: Re: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
Date: Thu, 22 Feb 2024 15:23:24 +0200 [thread overview]
Message-ID: <ZddKzHplwOX7naLv@smile.fi.intel.com> (raw)
In-Reply-To: <0a828f2c50de712940fb9a881702ac1678a35b7c.camel@codeconstruct.com.au>
On Thu, Feb 22, 2024 at 11:07:05AM +1030, Andrew Jeffery wrote:
> On Wed, 2024-02-21 at 20:31 +0200, Andy Shevchenko wrote:
> > Since we have now a common helper to read port properties
> > use it instead of sparse home grown solution.
>
> I did some brief testing of the series for the Aspeed machines under
> qemu, building them on top of v6.8-rc5:
>
> export ARCH=arm
> export CROSS_COMPILE=arm-linux-gnueabihf-
> make aspeed_g5_defconfig
> make -j$(nproc)
> qemu-system-arm -M rainier-bmc -nographic -no-reboot -kernel arch/arm/boot/zImage -dtb arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb -initrd ...
>
> I got an oops during boot, which bisected to this change:
Thank you for prompt testing! I will look at it.
--
With Best Regards,
Andy Shevchenko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-22 13:23 UTC|newest]
Thread overview: 105+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-21 18:31 [rft, PATCH v1 00/14] serial: Add a helper to parse device properties and more Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 01/14] serial: core: Move struct uart_port::quirks closer to possible values Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:54 ` Hugo Villeneuve
2024-02-21 19:25 ` Hugo Villeneuve
2024-02-21 18:54 ` Hugo Villeneuve
2024-02-21 19:04 ` Andy Shevchenko
2024-02-21 19:04 ` Andy Shevchenko
2024-02-21 19:04 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 02/14] serial: core: Add UPIO_UNSET constant for unset port type Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:47 ` Florian Fainelli
2024-02-21 18:47 ` Florian Fainelli
2024-02-21 18:47 ` Florian Fainelli
2024-02-21 18:53 ` Andy Shevchenko
2024-02-21 18:53 ` Andy Shevchenko
2024-02-21 18:53 ` Andy Shevchenko
2024-02-22 6:58 ` Jiri Slaby
2024-02-22 6:58 ` Jiri Slaby
2024-02-22 6:58 ` Jiri Slaby
2024-02-22 13:21 ` Andy Shevchenko
2024-02-22 13:21 ` Andy Shevchenko
2024-02-22 13:21 ` Andy Shevchenko
2024-02-23 5:42 ` Jiri Slaby
2024-02-23 5:42 ` Jiri Slaby
2024-02-23 5:42 ` Jiri Slaby
2024-02-23 14:59 ` Andy Shevchenko
2024-02-23 14:59 ` Andy Shevchenko
2024-02-23 14:59 ` Andy Shevchenko
2024-02-26 14:17 ` Andy Shevchenko
2024-02-26 14:17 ` Andy Shevchenko
2024-02-26 14:17 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 03/14] serial: port: Introduce a common helper to read properties Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 04/14] serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties() Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-26 4:13 ` Andrew Jeffery
2024-02-26 4:13 ` Andrew Jeffery
2024-02-26 4:13 ` Andrew Jeffery
2024-02-21 18:31 ` [PATCH v1 05/14] serial: 8250_bcm2835aux: " Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 06/14] serial: 8250_bcm7271: " Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-23 4:14 ` kernel test robot
2024-02-23 4:14 ` kernel test robot
2024-02-23 4:14 ` kernel test robot
2024-02-23 15:01 ` Andy Shevchenko
2024-02-23 15:01 ` Andy Shevchenko
2024-02-23 15:01 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 07/14] serial: 8250_dw: " Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 08/14] serial: 8250_ingenic: " Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 09/14] serial: 8250_lpc18xx: " Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 10/14] serial: 8250_of: " Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-22 0:37 ` Andrew Jeffery
2024-02-22 0:37 ` Andrew Jeffery
2024-02-22 0:37 ` Andrew Jeffery
2024-02-22 13:23 ` Andy Shevchenko [this message]
2024-02-22 13:23 ` Andy Shevchenko
2024-02-22 13:23 ` Andy Shevchenko
2024-02-22 16:43 ` Andy Shevchenko
2024-02-22 16:43 ` Andy Shevchenko
2024-02-22 16:43 ` Andy Shevchenko
2024-02-22 16:47 ` Andy Shevchenko
2024-02-22 16:47 ` Andy Shevchenko
2024-02-22 16:47 ` Andy Shevchenko
2024-02-22 17:39 ` Florian Fainelli
2024-02-22 17:39 ` Florian Fainelli
2024-02-22 17:39 ` Florian Fainelli
2024-02-22 19:54 ` Florian Fainelli
2024-02-22 19:54 ` Florian Fainelli
2024-02-22 19:54 ` Florian Fainelli
2024-02-23 15:02 ` Andy Shevchenko
2024-02-23 15:02 ` Andy Shevchenko
2024-02-23 15:02 ` Andy Shevchenko
2024-02-26 4:12 ` Andrew Jeffery
2024-02-26 4:12 ` Andrew Jeffery
2024-02-26 4:12 ` Andrew Jeffery
2024-02-21 18:31 ` [PATCH v1 11/14] serial: 8250_omap: " Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 12/14] serial: 8250_pxa: " Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 13/14] serial: 8250_tegra: " Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` [PATCH v1 14/14] serial: 8250_uniphier: " Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
2024-02-21 18:31 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZddKzHplwOX7naLv@smile.fi.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.