Re: [PATCH v9 06/10] PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers

[Niklas Cassel <cassel@kernel.org>]

On Mon, Mar 04, 2024 at 02:52:18PM +0530, Manivannan Sadhasivam wrote:
> Currently, dw_pcie_ep_init_registers() API is directly called by the glue
> drivers requiring active refclk from host. But for the other drivers, it is
> getting called implicitly by dw_pcie_ep_init(). This is due to the fact
> that this API initializes DWC EP specific registers and that requires an
> active refclk (either from host or generated locally by endpoint itsef).
> 
> But, this causes a discrepancy among the glue drivers. So to avoid this
> confusion, let's call this API directly from all glue drivers irrespective
> of refclk dependency. Only difference here is that the drivers requiring
> refclk from host will call this API only after the refclk is received and
> other drivers without refclk dependency will call this API right after
> dw_pcie_ep_init().
> 
> With this change, the check for 'core_init_notifier' flag can now be
> dropped from dw_pcie_ep_init() API. This will also allow us to remove the
> 'core_init_notifier' flag completely in the later commits.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/pci/controller/dwc/pci-dra7xx.c           |  7 +++++++
>  drivers/pci/controller/dwc/pci-imx6.c             |  8 ++++++++
>  drivers/pci/controller/dwc/pci-keystone.c         |  9 +++++++++
>  drivers/pci/controller/dwc/pci-layerscape-ep.c    |  7 +++++++
>  drivers/pci/controller/dwc/pcie-artpec6.c         | 13 ++++++++++++-
>  drivers/pci/controller/dwc/pcie-designware-ep.c   | 22 ----------------------
>  drivers/pci/controller/dwc/pcie-designware-plat.c |  9 +++++++++
>  drivers/pci/controller/dwc/pcie-keembay.c         | 16 +++++++++++++++-
>  drivers/pci/controller/dwc/pcie-rcar-gen4.c       | 12 +++++++++++-
>  drivers/pci/controller/dwc/pcie-uniphier-ep.c     | 13 ++++++++++++-
>  10 files changed, 90 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
> index 0e406677060d..395042b29ffc 100644
> --- a/drivers/pci/controller/dwc/pci-dra7xx.c
> +++ b/drivers/pci/controller/dwc/pci-dra7xx.c
> @@ -467,6 +467,13 @@ static int dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx,
>  		return ret;
>  	}
>  
> +	ret = dw_pcie_ep_init_registers(ep);
> +	if (ret) {

Here you are using if (ret) to error check the return from
dw_pcie_ep_init_registers().


> index c0c62533a3f1..8392894ed286 100644
> --- a/drivers/pci/controller/dwc/pci-keystone.c
> +++ b/drivers/pci/controller/dwc/pci-keystone.c
> @@ -1286,6 +1286,13 @@ static int ks_pcie_probe(struct platform_device *pdev)
>  		ret = dw_pcie_ep_init(&pci->ep);
>  		if (ret < 0)
>  			goto err_get_sync;
> +
> +		ret = dw_pcie_ep_init_registers(&pci->ep);
> +		if (ret < 0) {

Here you are using if (ret < 0) to error check the return from
dw_pcie_ep_init_registers(). Please be consistent.


> diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c
> index 9ed0a9ba7619..0edd9ab3f139 100644
> --- a/drivers/pci/controller/dwc/pcie-artpec6.c
> +++ b/drivers/pci/controller/dwc/pcie-artpec6.c
> @@ -441,7 +441,18 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
>  
>  		pci->ep.ops = &pcie_ep_ops;
>  
> -		return dw_pcie_ep_init(&pci->ep);
> +		ret = dw_pcie_ep_init(&pci->ep);
> +		if (ret < 0)

Here you are using if (ret < 0) to error check the return from
dw_pcie_ep_init().


> index 778588b4be70..ca9b22e654cd 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-plat.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-plat.c
> @@ -145,6 +145,15 @@ static int dw_plat_pcie_probe(struct platform_device *pdev)
>  
>  		pci->ep.ops = &pcie_ep_ops;
>  		ret = dw_pcie_ep_init(&pci->ep);
> +		if (ret)

Here you are using if (ret) to error check the return from
dw_pcie_ep_init(). Please be consistent.