All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: intel-wired-lan@lists.osuosl.org
Cc: pmenzel@molgen.mpg.de, wojciech.drewek@intel.com,
	marcin.szycik@intel.com, netdev@vger.kernel.org,
	Jedrzej Jagielski <jedrzej.jagielski@intel.com>,
	sridhar.samudrala@intel.com
Subject: Re: [Intel-wired-lan] [iwl-next v2 2/2] ice: tc: allow ip_proto matching
Date: Thu, 14 Mar 2024 12:03:41 +0100	[thread overview]
Message-ID: <ZfLZjUZiQwJzJ445@mev-dev> (raw)
In-Reply-To: <20240222123956.2393-3-michal.swiatkowski@linux.intel.com>

On Thu, Feb 22, 2024 at 01:39:56PM +0100, Michal Swiatkowski wrote:
> Add new matching type for ip_proto.
> 
> Use it in the same lookup type as for TTL. In hardware it has the same
> protocol ID, but different offset.
> 
> Example command to add filter with ip_proto:
> $tc filter add dev eth10 ingress protocol ip flower ip_proto icmp \
>  skip_sw action mirred egress redirect dev eth0
> 
> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_tc_lib.c | 17 +++++++++++++++--
>  drivers/net/ethernet/intel/ice/ice_tc_lib.h |  1 +
>  2 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
> index 49ed5fd7db10..f7c0f62fb730 100644
> --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c
> +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
> @@ -78,7 +78,8 @@ ice_tc_count_lkups(u32 flags, struct ice_tc_flower_lyr_2_4_hdrs *headers,
>  		     ICE_TC_FLWR_FIELD_DEST_IPV6 | ICE_TC_FLWR_FIELD_SRC_IPV6))
>  		lkups_cnt++;
>  
> -	if (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL))
> +	if (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL |
> +		     ICE_TC_FLWR_FIELD_IP_PROTO))
>  		lkups_cnt++;

There is an issue here. In case of ipv6 it shouldn't be count as there is no
support for next header in ipv6.

Example command to reproduce the problem:
tc filter add dev eth0 ingress protocol ipv6 prio 103 flower skip_sw \
	dst_mac fa:16:3e:13:e9:a1 ip_proto udp src_port 547 dst_port 546 \
	dst_ip fe80::/64 action drop

Filter won't be added because of mismatch between filled and counted
lookups.

I will send v3 with fix.

Thanks,
Michal

>  
>  	/* are L2TPv3 options specified? */
> @@ -530,7 +531,8 @@ ice_tc_fill_rules(struct ice_hw *hw, u32 flags,
>  	}
>  
>  	if (headers->l2_key.n_proto == htons(ETH_P_IP) &&
> -	    (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL))) {
> +	    (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL |
> +		      ICE_TC_FLWR_FIELD_IP_PROTO))) {
>  		list[i].type = ice_proto_type_from_ipv4(inner);
>  
>  		if (flags & ICE_TC_FLWR_FIELD_IP_TOS) {
> @@ -545,6 +547,13 @@ ice_tc_fill_rules(struct ice_hw *hw, u32 flags,
>  				headers->l3_mask.ttl;
>  		}
>  
> +		if (flags & ICE_TC_FLWR_FIELD_IP_PROTO) {
> +			list[i].h_u.ipv4_hdr.protocol =
> +				headers->l3_key.ip_proto;
> +			list[i].m_u.ipv4_hdr.protocol =
> +				headers->l3_mask.ip_proto;
> +		}
> +
>  		i++;
>  	}
>  
> @@ -1515,7 +1524,11 @@ ice_parse_cls_flower(struct net_device *filter_dev, struct ice_vsi *vsi,
>  
>  		headers->l2_key.n_proto = cpu_to_be16(n_proto_key);
>  		headers->l2_mask.n_proto = cpu_to_be16(n_proto_mask);
> +
> +		if (match.key->ip_proto)
> +			fltr->flags |= ICE_TC_FLWR_FIELD_IP_PROTO;
>  		headers->l3_key.ip_proto = match.key->ip_proto;
> +		headers->l3_mask.ip_proto = match.mask->ip_proto;
>  	}
>  
>  	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
> diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.h b/drivers/net/ethernet/intel/ice/ice_tc_lib.h
> index 65d387163a46..856f371d0687 100644
> --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.h
> +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.h
> @@ -34,6 +34,7 @@
>  #define ICE_TC_FLWR_FIELD_VLAN_PRIO		BIT(27)
>  #define ICE_TC_FLWR_FIELD_CVLAN_PRIO		BIT(28)
>  #define ICE_TC_FLWR_FIELD_VLAN_TPID		BIT(29)
> +#define ICE_TC_FLWR_FIELD_IP_PROTO		BIT(30)
>  
>  #define ICE_TC_FLOWER_MASK_32   0xFFFFFFFF
>  
> -- 
> 2.42.0
> 

WARNING: multiple messages have this Message-ID (diff)
From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org, marcin.szycik@intel.com,
	sridhar.samudrala@intel.com, wojciech.drewek@intel.com,
	pmenzel@molgen.mpg.de,
	Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Subject: Re: [iwl-next v2 2/2] ice: tc: allow ip_proto matching
Date: Thu, 14 Mar 2024 12:03:41 +0100	[thread overview]
Message-ID: <ZfLZjUZiQwJzJ445@mev-dev> (raw)
In-Reply-To: <20240222123956.2393-3-michal.swiatkowski@linux.intel.com>

On Thu, Feb 22, 2024 at 01:39:56PM +0100, Michal Swiatkowski wrote:
> Add new matching type for ip_proto.
> 
> Use it in the same lookup type as for TTL. In hardware it has the same
> protocol ID, but different offset.
> 
> Example command to add filter with ip_proto:
> $tc filter add dev eth10 ingress protocol ip flower ip_proto icmp \
>  skip_sw action mirred egress redirect dev eth0
> 
> Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_tc_lib.c | 17 +++++++++++++++--
>  drivers/net/ethernet/intel/ice/ice_tc_lib.h |  1 +
>  2 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
> index 49ed5fd7db10..f7c0f62fb730 100644
> --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c
> +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c
> @@ -78,7 +78,8 @@ ice_tc_count_lkups(u32 flags, struct ice_tc_flower_lyr_2_4_hdrs *headers,
>  		     ICE_TC_FLWR_FIELD_DEST_IPV6 | ICE_TC_FLWR_FIELD_SRC_IPV6))
>  		lkups_cnt++;
>  
> -	if (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL))
> +	if (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL |
> +		     ICE_TC_FLWR_FIELD_IP_PROTO))
>  		lkups_cnt++;

There is an issue here. In case of ipv6 it shouldn't be count as there is no
support for next header in ipv6.

Example command to reproduce the problem:
tc filter add dev eth0 ingress protocol ipv6 prio 103 flower skip_sw \
	dst_mac fa:16:3e:13:e9:a1 ip_proto udp src_port 547 dst_port 546 \
	dst_ip fe80::/64 action drop

Filter won't be added because of mismatch between filled and counted
lookups.

I will send v3 with fix.

Thanks,
Michal

>  
>  	/* are L2TPv3 options specified? */
> @@ -530,7 +531,8 @@ ice_tc_fill_rules(struct ice_hw *hw, u32 flags,
>  	}
>  
>  	if (headers->l2_key.n_proto == htons(ETH_P_IP) &&
> -	    (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL))) {
> +	    (flags & (ICE_TC_FLWR_FIELD_IP_TOS | ICE_TC_FLWR_FIELD_IP_TTL |
> +		      ICE_TC_FLWR_FIELD_IP_PROTO))) {
>  		list[i].type = ice_proto_type_from_ipv4(inner);
>  
>  		if (flags & ICE_TC_FLWR_FIELD_IP_TOS) {
> @@ -545,6 +547,13 @@ ice_tc_fill_rules(struct ice_hw *hw, u32 flags,
>  				headers->l3_mask.ttl;
>  		}
>  
> +		if (flags & ICE_TC_FLWR_FIELD_IP_PROTO) {
> +			list[i].h_u.ipv4_hdr.protocol =
> +				headers->l3_key.ip_proto;
> +			list[i].m_u.ipv4_hdr.protocol =
> +				headers->l3_mask.ip_proto;
> +		}
> +
>  		i++;
>  	}
>  
> @@ -1515,7 +1524,11 @@ ice_parse_cls_flower(struct net_device *filter_dev, struct ice_vsi *vsi,
>  
>  		headers->l2_key.n_proto = cpu_to_be16(n_proto_key);
>  		headers->l2_mask.n_proto = cpu_to_be16(n_proto_mask);
> +
> +		if (match.key->ip_proto)
> +			fltr->flags |= ICE_TC_FLWR_FIELD_IP_PROTO;
>  		headers->l3_key.ip_proto = match.key->ip_proto;
> +		headers->l3_mask.ip_proto = match.mask->ip_proto;
>  	}
>  
>  	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
> diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.h b/drivers/net/ethernet/intel/ice/ice_tc_lib.h
> index 65d387163a46..856f371d0687 100644
> --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.h
> +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.h
> @@ -34,6 +34,7 @@
>  #define ICE_TC_FLWR_FIELD_VLAN_PRIO		BIT(27)
>  #define ICE_TC_FLWR_FIELD_CVLAN_PRIO		BIT(28)
>  #define ICE_TC_FLWR_FIELD_VLAN_TPID		BIT(29)
> +#define ICE_TC_FLWR_FIELD_IP_PROTO		BIT(30)
>  
>  #define ICE_TC_FLOWER_MASK_32   0xFFFFFFFF
>  
> -- 
> 2.42.0
> 

  parent reply	other threads:[~2024-03-14 11:03 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-22 12:39 [Intel-wired-lan] [iwl-next v2 0/2] ice: extend tc flower offload Michal Swiatkowski
2024-02-22 12:39 ` Michal Swiatkowski
2024-02-22 12:39 ` [Intel-wired-lan] [iwl-next v2 1/2] ice: tc: check src_vsi in case of traffic from VF Michal Swiatkowski
2024-02-22 12:39   ` Michal Swiatkowski
2024-02-26 13:34   ` [Intel-wired-lan] " Simon Horman
2024-02-26 13:34     ` Simon Horman
2024-03-14 10:59     ` [Intel-wired-lan] " Michal Swiatkowski
2024-03-14 10:59       ` Michal Swiatkowski
2024-03-08  7:39   ` [Intel-wired-lan] " Buvaneswaran, Sujai
2024-03-08  7:39     ` Buvaneswaran, Sujai
2024-02-22 12:39 ` [Intel-wired-lan] [iwl-next v2 2/2] ice: tc: allow ip_proto matching Michal Swiatkowski
2024-02-22 12:39   ` Michal Swiatkowski
2024-02-26 13:33   ` [Intel-wired-lan] " Simon Horman
2024-02-26 13:33     ` Simon Horman
2024-03-08  7:40   ` [Intel-wired-lan] " Buvaneswaran, Sujai
2024-03-08  7:40     ` Buvaneswaran, Sujai
2024-03-14 11:03   ` Michal Swiatkowski [this message]
2024-03-14 11:03     ` Michal Swiatkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZfLZjUZiQwJzJ445@mev-dev \
    --to=michal.swiatkowski@linux.intel.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jedrzej.jagielski@intel.com \
    --cc=marcin.szycik@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=pmenzel@molgen.mpg.de \
    --cc=sridhar.samudrala@intel.com \
    --cc=wojciech.drewek@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.