From: Shawn Guo <shawnguo2@yeah.net>
To: Wadim Mueller <wafgo01@gmail.com>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Ulf Hansson" <ulf.hansson@linaro.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Chester Lin" <chester62515@gmail.com>,
"Andreas Färber" <afaerber@suse.de>,
"Matthias Brugger" <mbrugger@suse.com>,
"NXP S32 Linux Team" <s32@nxp.com>,
"Tim Harvey" <tharvey@gateworks.com>,
"Marco Felsch" <m.felsch@pengutronix.de>,
"Marek Vasut" <marex@denx.de>,
"Gregor Herburger" <gregor.herburger@ew.tq-group.com>,
"Hugo Villeneuve" <hvilleneuve@dimonoff.com>,
"Joao Paulo Goncalves" <joao.goncalves@toradex.com>,
"Markus Niebel" <Markus.Niebel@ew.tq-group.com>,
"Matthias Schiffer" <matthias.schiffer@tq-group.com>,
"Stefan Wahren" <stefan.wahren@chargebyte.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Philippe Schenker" <philippe.schenker@toradex.com>,
"Josua Mayer" <josua@solid-run.com>,
"Li Yang" <leoyang.li@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-serial@vger.kernel.org
Subject: Re: [PATCH v4 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3
Date: Tue, 2 Apr 2024 22:41:50 +0800 [thread overview]
Message-ID: <ZgwZLkpBf11rHNrG@dragon> (raw)
In-Reply-To: <20240324214329.29988-5-wafgo01@gmail.com>
On Sun, Mar 24, 2024 at 10:43:26PM +0100, Wadim Mueller wrote:
> This commit adds device tree support for the NXP S32G3-based
> S32G-VNP-RDB3 Board [1].
>
> The S32G3 features an 8-core ARM Cortex-A53 based SoC developed by NXP.
>
> The device tree files are derived from the official NXP downstream
> Linux tree [2].
>
> This addition encompasses a limited selection of peripherals that
> are upstream-supported. Apart from the ARM System Modules
> (GIC, Generic Timer, etc.), the following IPs have been validated:
>
> * UART: fsl-linflexuart
> * SDHC: fsl-imx-esdhc
>
> Clock settings for the chip rely on ATF Firmware [3].
> Pin control integration into the device tree is pending and currently
> relies on Firmware/U-Boot settings [4].
>
> These changes were validated using BSP39 Firmware/U-Boot from NXP [5].
>
> The modifications enable booting the official Ubuntu 22.04 from NXP on
> the RDB3 with default settings from the SD card and eMMC.
>
> [1] https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3
> [2] https://github.com/nxp-auto-linux/linux
> [3] https://github.com/nxp-auto-linux/arm-trusted-firmware
> [4] https://github.com/nxp-auto-linux/u-boot
> [5] https://github.com/nxp-auto-linux/auto_yocto_bsp
>
> Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> arch/arm64/boot/dts/freescale/s32g3.dtsi | 233 ++++++++++++++++++
> .../boot/dts/freescale/s32g399a-rdb3.dts | 45 ++++
> 3 files changed, 279 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/s32g3.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 2cb0212b63c6..e701008dbc7b 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -252,3 +252,4 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
> dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
> dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
> dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
> +dtb-$(CONFIG_ARCH_S32) += s32g399a-rdb3.dtb
The list is alphabetically sorted, so it should be added before
s32v234-evb.dtb. I fixed it up and applied the patch.
Shawn
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo2@yeah.net>
To: Wadim Mueller <wafgo01@gmail.com>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Ulf Hansson" <ulf.hansson@linaro.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
"NXP Linux Team" <linux-imx@nxp.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Jiri Slaby" <jirislaby@kernel.org>,
"Chester Lin" <chester62515@gmail.com>,
"Andreas Färber" <afaerber@suse.de>,
"Matthias Brugger" <mbrugger@suse.com>,
"NXP S32 Linux Team" <s32@nxp.com>,
"Tim Harvey" <tharvey@gateworks.com>,
"Marco Felsch" <m.felsch@pengutronix.de>,
"Marek Vasut" <marex@denx.de>,
"Gregor Herburger" <gregor.herburger@ew.tq-group.com>,
"Hugo Villeneuve" <hvilleneuve@dimonoff.com>,
"Joao Paulo Goncalves" <joao.goncalves@toradex.com>,
"Markus Niebel" <Markus.Niebel@ew.tq-group.com>,
"Matthias Schiffer" <matthias.schiffer@tq-group.com>,
"Stefan Wahren" <stefan.wahren@chargebyte.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Philippe Schenker" <philippe.schenker@toradex.com>,
"Josua Mayer" <josua@solid-run.com>,
"Li Yang" <leoyang.li@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-serial@vger.kernel.org
Subject: Re: [PATCH v4 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3
Date: Tue, 2 Apr 2024 22:41:50 +0800 [thread overview]
Message-ID: <ZgwZLkpBf11rHNrG@dragon> (raw)
In-Reply-To: <20240324214329.29988-5-wafgo01@gmail.com>
On Sun, Mar 24, 2024 at 10:43:26PM +0100, Wadim Mueller wrote:
> This commit adds device tree support for the NXP S32G3-based
> S32G-VNP-RDB3 Board [1].
>
> The S32G3 features an 8-core ARM Cortex-A53 based SoC developed by NXP.
>
> The device tree files are derived from the official NXP downstream
> Linux tree [2].
>
> This addition encompasses a limited selection of peripherals that
> are upstream-supported. Apart from the ARM System Modules
> (GIC, Generic Timer, etc.), the following IPs have been validated:
>
> * UART: fsl-linflexuart
> * SDHC: fsl-imx-esdhc
>
> Clock settings for the chip rely on ATF Firmware [3].
> Pin control integration into the device tree is pending and currently
> relies on Firmware/U-Boot settings [4].
>
> These changes were validated using BSP39 Firmware/U-Boot from NXP [5].
>
> The modifications enable booting the official Ubuntu 22.04 from NXP on
> the RDB3 with default settings from the SD card and eMMC.
>
> [1] https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3
> [2] https://github.com/nxp-auto-linux/linux
> [3] https://github.com/nxp-auto-linux/arm-trusted-firmware
> [4] https://github.com/nxp-auto-linux/u-boot
> [5] https://github.com/nxp-auto-linux/auto_yocto_bsp
>
> Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> arch/arm64/boot/dts/freescale/s32g3.dtsi | 233 ++++++++++++++++++
> .../boot/dts/freescale/s32g399a-rdb3.dts | 45 ++++
> 3 files changed, 279 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/s32g3.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 2cb0212b63c6..e701008dbc7b 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -252,3 +252,4 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
> dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
> dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
> dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
> +dtb-$(CONFIG_ARCH_S32) += s32g399a-rdb3.dtb
The list is alphabetically sorted, so it should be added before
s32v234-evb.dtb. I fixed it up and applied the patch.
Shawn
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-04-02 14:45 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-24 21:43 [PATCH v4 0/4] NXP S32G3 SoC initial bring-up Wadim Mueller
2024-03-24 21:43 ` Wadim Mueller
2024-03-24 21:43 ` [PATCH v4 1/4] dt-bindings: arm: fsl: add NXP S32G3 board Wadim Mueller
2024-03-24 21:43 ` Wadim Mueller
2024-04-02 14:34 ` Shawn Guo
2024-04-02 14:34 ` Shawn Guo
2024-03-24 21:43 ` [PATCH v4 2/4] dt-bindings: serial: fsl-linflexuart: add compatible for S32G3 Wadim Mueller
2024-03-24 21:43 ` Wadim Mueller
2024-03-25 7:53 ` Krzysztof Kozlowski
2024-03-25 7:53 ` Krzysztof Kozlowski
2024-04-12 16:32 ` Rob Herring
2024-04-12 16:32 ` Rob Herring
2024-03-24 21:43 ` [PATCH v4 3/4] dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G3 support Wadim Mueller
2024-03-24 21:43 ` Wadim Mueller
2024-03-25 7:54 ` Krzysztof Kozlowski
2024-03-25 7:54 ` Krzysztof Kozlowski
2024-03-25 13:19 ` Ulf Hansson
2024-03-25 13:19 ` Ulf Hansson
2024-03-24 21:43 ` [PATCH v4 4/4] arm64: dts: S32G3: Introduce device tree for S32G-VNP-RDB3 Wadim Mueller
2024-03-24 21:43 ` Wadim Mueller
2024-03-25 9:30 ` Ghennadi Procopciuc
2024-03-25 9:30 ` Ghennadi Procopciuc
2024-03-25 13:26 ` Wadim Mueller
2024-03-25 13:26 ` Wadim Mueller
2024-03-25 13:34 ` Ghennadi Procopciuc
2024-03-25 13:34 ` Ghennadi Procopciuc
2024-04-02 14:41 ` Shawn Guo [this message]
2024-04-02 14:41 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZgwZLkpBf11rHNrG@dragon \
--to=shawnguo2@yeah.net \
--cc=Markus.Niebel@ew.tq-group.com \
--cc=afaerber@suse.de \
--cc=bhelgaas@google.com \
--cc=chester62515@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=gregor.herburger@ew.tq-group.com \
--cc=hvilleneuve@dimonoff.com \
--cc=jirislaby@kernel.org \
--cc=joao.goncalves@toradex.com \
--cc=josua@solid-run.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=m.felsch@pengutronix.de \
--cc=marex@denx.de \
--cc=matthias.schiffer@tq-group.com \
--cc=mbrugger@suse.com \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=s32@nxp.com \
--cc=shawnguo@kernel.org \
--cc=stefan.wahren@chargebyte.com \
--cc=tharvey@gateworks.com \
--cc=ulf.hansson@linaro.org \
--cc=wafgo01@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.